eChapters

Introduction

The optimum soil pH for plant production is one that is slightly acidic, at this pH soil microorganisms are most active and plant nutrients are readily available. At extremes of high (alkaline) and low (acidic) pH this delicate balance is disturbed and plant nutrients that were in adequate supply can become either deficient or toxic to plant growth. Some essential nutrients such as phosphorous, calcium, magnesium and molybdenum become unavailable if the soil pH becomes too acidic. Acidic conditions will result in a lowering of plant production in farming systems. This will result in reduced profitability and an increased reliance on fertilizers to sustain any form of productive agriculture. Correcting soil pH to a more favorable pH range will increase the availability of essential nutrients.

Introduction

Soils are formed by weathering of rocks and minerals and all soils contain some amount of soluble salts. Many of these act as a source of essential nutrients for the healthy growth of plants. However, when quantity and quality of salts in the soil near rhizosphere exceeds a particular value, growth, yield and/or quality of most crops is adversely affected. Such a soil is called salt-affected. The degree of adverse effects depends upon the type and quantity of salts, crop and its variety, stage of growth, cultural practices and environmental factors viz. temperature, relative humidity, and rainfall etc. Development of salinity and waterlogging is a serious problem in arid and semi-arid regions of the world and threatening the sustainability of irrigated agriculture.

Soil degradation resulting from salinity and sodicity is a major environmental threat to soil fertility and agricultural productivity in arid and semiarid regions of the world. Saline–sodic soils are degraded due to the simultaneous effect of salinity and sodicity. This causes loss of soil physical structure by clay swelling, and dispersion because of high Na+ concentrations in the soil solution or at the exchange phase. Apart from these physicochemical effects, this leads to biological properties, such as microbial respiration and biomass, becoming worse. On the other hand, salinity affects plant growth by creating osmotic imbalances and specific ion toxicities, which pose limitations to morphological, histological, chemical, biochemical, and metabolic processes. In turn, these reduce stomatal opening and photosynthetic rate, leading to decreased plant growth, crop yield, and quality.

Introduction

Pedology:- Pedology word drive from Greek word pedon, means soil or earth and logos means to study. Pedology is concerned with origin of the soil, its classification, distribution and character (Physical, Chemical and Biological).

Definition:- Soils are natural bodies made from both mineral and organic materials and capable of supporting plants out-of-doors.

Composition of soil on volume basis (Soil components)

i. Mineral matter :- 45%

ii. Organic matter :- 5%

iii. Soil water :- 25%

iv. Soil air :- 25%

Soil formation is a long term process. It takes several million years to form a thin layer of soil. The soil is made up of broken down rock material of varying degree of fineness and changed in varying degrees from the parent rocks by the action of different agencies such that the growth of vegetation is made possible. As soil is a complex mixture of various components, its formation is also more complex. The Formation of a particular type of soil depends upon the physico-chemical properties of the parent rock, intensity and duration of weathering, climatic and other parameters.

Introduction

Soil is a very precious natural resource. It is considered as the epicentre of all the life forms on earth. One cm of soil takes about 1000 years to form but if not used sustainably and managed properly, it may degrade and get converted into a wasteland in just few countable years. The heavy population load, rapid industrialization, unscientific agricultural practices have already put a lot of pressure on soil resulting in reduced soil fertility, degraded wastelands and problematic soils. In India, out of the 329 m ha of geographical area, nearly 50% is subjected to degradation by the various agents like water, wind and biotic interference. In this chapter we will focus on the wastelands and problematic soils, their distribution, cause of formation, management practices mainly in respect to the Indian state of Jharkhand.

Introduction

Over 250 million people are directly affected by land degradation worldwide. Each year 12 million hectares are lost to deserts. Only 11 % of the global land surface can be considered as prime or Class-I land.

India contains 2.4 % of world’s total land. Out of the total geographical area of 329 million ha of the country, land use statistics are available for about 93 % of the total area which comes around 306 million ha. The arable land (net area sown plus the current and other fallow lands) was estimated at 166.14 million ha (54.2%) while the area under forest was accounted at 69.02 million ha (22.6%). Land put to non-agricultural uses was estimated at 22.97 million ha (7.5%) and the barren and uncultivable land at 19.44 million ha (6.4%). Permanent pastures and other grazing lands where estimated 11.04 million ha. (3.6%), land under miscellaneous uses at 3.62 million ha. (1.2%) and the cultivable waste land at 13.08 million ha (4.5%). By summing up these figures, the reporting area comes out 306 million ha.

Introduction

Intensive production of agricultural crops has contributed to decline in soil quality, leading to lower crop productivity and farm profitability. Major causes of this decline are soil compaction, surface crusting, low organic matter, increased pressure and damage from diseases, weeds, insects, and other pests, as well as a lower density and diversity of beneficial soil organisms. These constraints have increased the interest of farmers in assessing the health status of their soils and in implementing sustainable soil management practices. Soil health is critically important to sustainable agricultural productivity and environmental well being. Healthy soils provide a range of environmental services including water infiltration, habitat provision and profitable and sustainable agriculture.

6.1 Introduction to Remote Sensing in Watershed Management

Remote sensing involves acquiring information about the Earth's surface without physical contact, using satellite or aerial imagery. This technology has revolutionized watershed management by providing detailed and timely data, crucial for effective planning and decision-making.

6.2 Remote Sensing Technologies and Techniques

Satellite Imagery

Satellite imagery involves capturing images of the Earth from space using satellites equipped with sensors. Some of the most notable satellite missions providing high-resolution imagery for large-scale environmental monitoring include Landsat, Sentinel, and MODIS.

a. Landsat: Operated by NASA and the US Geological Survey, Landsat satellites have been observing the Earth since 1972. Landsat provides medium-resolution images (15-60 meters per pixel) in both visible and infrared wavelengths, allowing for detailed monitoring of land use, vegetation health, and water bodies.

5.1 Participatory Approaches to Watershed Management

Community Engagement Strategies: Exploring methods for involving local communities in decision-making processes, project planning, and implementation, including participatory rural appraisal (PRA), stakeholder consultations, and community meetings. Exploring methods for involving local communities in decision-making processes, project planning, and implementation is essential for promoting ownership, sustainability, and effectiveness of development initiatives within watershed areas. Here are key community engagement strategies:

a. Participatory Rural Appraisal (PRA): PRA is a participatory approach that involves community members in assessing their own needs, priorities, resources, and capacities. PRA techniques, such as transect walks, social mapping, seasonal calendars, and wealth ranking, enable communities to identify and analyze local issues, strengths, and opportunities. PRA fosters dialogue, builds trust, and empowers communities to take ownership of development processes.

b. Stakeholder Consultations: Conduct stakeholder consultations to engage a diverse range of actors, including community members, local leaders, government officials, civil society organizations, and other stakeholders. Consultations provide opportunities for stakeholders to share their perspectives, knowledge, and concerns, and contribute to decision-making and project design. Stakeholder consultations ensure inclusivity, transparency, and legitimacy in development processes.

c. Community Meetings: Organize community meetings, village assemblies, or public forums to facilitate dialogue, consensus-building, and decision-making among community members. Community meetings provide platforms for discussing development priorities, reviewing project progress, and resolving conflicts collaboratively. They foster social cohesion, collective action, and community mobilization around shared goals and aspirations.

4.1 Demographic Profile of Watershed Communities

• Population Distribution: Examining the spatial distribution and density of population within watershed areas, including rural settlements, urban centers, and peri-urban zones. Analyzing population distribution within watershed areas involves understanding how people are distributed across various types of settlements, including rural, urban, and peri urban zones. Here's a breakdown of each:

a. Rural Settlements: These are typically smaller communities dispersed throughout the watershed area, often engaged in agriculture, forestry, or other primary industries. Population density in rural areas tends to be lower compared to urban centers. The distribution of rural settlements can be influenced by factors such as terrain, availability of natural resources, and historical land use patterns.

b. Urban Centers: Urban areas within watershed boundaries consist of cities and towns with higher population densities and more developed infrastructure. These areas are characterized by a concentration of economic activities, services, and amenities. Population distribution within urban centers can vary widely, with some areas experiencing high population density in downtown cores and others having more spread-out suburbs.

3.1 Land Use and Land Cover Analysis

Concept and Importance: Understanding the significance of land use and land cover analysis in watershed management for assessing spatial patterns of human activities and natural ecosystems.

Land use and land cover analysis is a fundamental tool in watershed management, providing valuable insights into the spatial patterns of human activities and natural ecosystems within watersheds. Here's an exploration of the concept and importance of land use and land cover analysis in watershed management:

a. Concept: Land use refers to the human activities and practices conducted on the land, including residential, commercial, industrial, agricultural, recreational, and conservation activities. Land cover, on the other hand, refers to the physical and biological features of the land surface, including vegetation, water bodies, bare soil, impervious surfaces, and artificial structures. Land use and land cover analysis involves mapping, classifying, and quantifying the spatial distribution and temporal changes of different land use and land cover types within watersheds using remote sensing, Geographic Information Systems (GIS), and field surveys.

b. Significance: Land use and land cover analysis is essential for watershed management due to its significance in understanding the interactions between human activities and natural processes, assessing environmental impacts, and guiding land management decisions. Key reasons for the importance of land use and land cover analysis in watershed management include:

2.1 Definition and Boundaries of Watershed Areas

Concept of Watershed Boundaries

The concept of watershed boundaries is fundamental to understanding the hydrological and ecological dynamics of a given landscape. Watershed boundaries, also known as drainage divides or catchment areas, delineate the geographical extent of a watershed, which is an area of land where all the water drains to a common outlet, such as a stream, river, lake, or ocean. Watershed boundaries represent the natural hydrological and ecological units of a landscape, reflecting the interconnectedness of water resources and ecosystems. Understanding the factors influencing their definition is essential for effective watershed management, resource planning, and environmental conservation. Exploring the delineation of watershed boundaries involves considering various factors that influence their definition:

a. Topography: Topography, particularly the elevation and slope of the land, plays a significant role in defining watershed boundaries. Watershed boundaries typically follow ridgelines or high points in the landscape, where water flows in different directions, ultimately converging into distinct drainage networks.

b. Hydrology: Hydrological characteristics, such as precipitation patterns, surface runoff, and groundwater flow, influence the delineation of watershed boundaries. Areas with higher rainfall or snowmelt may have larger watersheds with more extensive drainage areas, while areas with low precipitation may have smaller, more localized watersheds.

1.1 Introduction to Integrated Watershed Management

Definition and Scope of Integrated Watershed Management: Integrated Watershed Management (IWM) refers to a comprehensive approach to managing the resources and ecological processes within a watershed area in a coordinated and integrated manner. Integrated watershed management represents a holistic approach to managing natural resources within a watershed, with the aim of achieving sustainable development while maintaining ecosystem health and resilience. It involves collaboration among various stakeholders and integrates scientific knowledge with traditional wisdom to address complex environmental challenges. This section aims to provide a clear understanding of what integrated watershed management entails, including its scope and key components.

a. Definition of Integrated Watershed Management: Integrated Watershed Management is a holistic and multi-disciplinary approach that considers the entire watershed as a unit for planning and managing natural resources. It involves the coordinated management of land, water, vegetation, and other resources within a watershed to achieve sustainable development goals while preserving ecological integrity.

Anatomy

The study of gross internal structure of plant organs by the technique of section cutting is called anatomy .The term anatomy was derived from two words ‘ana’ means as under and ‘temnein’ meaning to cut. Anatomy is the branch of science which deals with internal structures and organization of the organism. It is also known as internal morphology. Plant anatomy also describes tissue and tissue systems of the plant body.

Previous Year Questions

1. Intellectual property rights (IPR) are the rights given to persons over the creations of their minds: inventions, literary and artistic works, and symbols, names and images used in commerce. They usually give the creator an exclusive right over the use of his/her creation for a certain period of time?

2. Plant varietal protection?

• The importance of intellectual property was first recognized in the Paris Convention for the Protection of Industrial Property (1883) and the Berne Convention for the Protection of Literary and Artistic Works (1886). Both treaties are administered by the World Intellectual Property Organization (WIPO).

Previous year questions

1. Introduction?

2. Role of private? Introduction

• The Indian seed industry used to be dominated by public sector seed companies. However, following the easing of government regulations and the implementation of a new seed policy in 1988, the private sector seed companies have started playing a major role in seed development and marketing.

• More recently, the government’s decision to embrace biotechnology as a means of achieving food security has attracted several leading biotechnology-focused multinational seed companies to India.

• The composition of the seed industry, by volume of turnover, has reportedly reached a ratio of 60:40 between the private and public sectors.

Previous Year Questions

1. What is DNA fingerprinting? Discuss the applied aspects in modern agriculture. (15M, CSE 2021)

• The term DNA fingerprinting in its original sense refers to the method developed in 1985 by Sir Alec Jeffreys (Jeffreys et al., 1985) and his associates for the simultaneous detection of highly variable DNA fragments by hybridisation of specific multilocus probes to electrophoretically separated restriction fragments?

• The DNA fingerprints, resembling barcodes, are unique to the individual and hence can be used in much the same way as conventional fingerprints - to identify individuals with absolute certainty?

DNA Fingerprinting Techniques

• A large number of fingerprinting techniques are in currency, which are variations and combinations of restriction fragmentation and polymerase chain reaction (PCR).

• Restriction fragment length polymorphism (RFLP) involves digesting DNA with restriction enzymes, separating the resultant DNA fragments by gel electrophoresis, blotting the fragments to a filter and hybridising probes to the separated fragments. Specific probe-enzyme combinations give highly reproducible patterns.

• With the advent of PCR technology a number of simpler techniques have become available for molecular characterisation.

• These include, random amplified polymorphic DNA (RAPD) and its several variants, intersimple sequence repeats (ISSR), amplified fragment length polymorphism (AFLP) and sequence tagged microsatellites sites (STMS).

Previous Year Questions

1. Different Classes of Seeds?

2. Various parameters of field & seed standards for breeder seed production?

3. Factors that affect the longevity of seeds during storage in warehouses?

4. Initial Seed Quality?

5. Seed Testing?

Different Classes of Seeds

1. Nucleus Seed: It is handful of seed maintained by concerned breeder for further multiplication. The nucleus seed will have all the characters that the breeder has placed in it and it is of highest genetic purity. The quantity of nucleus seed is in kilograms.

2. Breeder Seed (BS): Breeder seed is a seed or vegetative propagating material directly controlled by the originating or sponsoring plant breeder of the breeding programme or institution and or seed whose production is personally supervised by a qualified plant breeder and which provides the source for the initial and recurring increase of foundation seed. Breeder seed is exempted from certification. However, the breeder seed crop is being inspected at appropriate stages by a Monitoring Team consisting of breeder, representative of NSC and representative of Seed Certification Agency. The breeder seed lots are affixed with Golden Yellow tags. The genetic purity of breeder seed crop should be maintained at 100 per cent.

Previous Year Questions

1. What is seed treatment?

2. Factors affecting the seed quality of a crop during seed production?

3. Seed treatment campaign – Role & importance?

4. Agronomic and genetic principles of quality seed production?

5. Varietal seed production and hybrid seed production?

Seed Treatment

Seed treatment refers to the application of fungicide, insecticide or both to the seeds to disinfect(deep seated) and disinfest (over seed coat) them from seed borne or soil borne pathogenic organisms and storage insects. It also refers to subjecting the seed to solar energy exposure or immersion in conditional water.

Introduction

• Thus "genetic enhancement" or "pre-breeding" refers to the transfer or introgression of genes or gene combinations from unadapted sources into breeding materials (FAO, 1996).

• Genetic enhancement plays an important role in utilizing unadapted and unutilized germplasm collections and creating vast genetic variability for development of productive cultivars / hybrids.

• Objective of Genetic Enhancement is broadening the genetic base and increases genetic diversity

• Gene pool – Harlan and de Wet (1971).

• Primary gene pool (GP-1): Members of this gene pool are probably in the same "species" (in conventional biological usage) and can intermate freely.

• Secondary gene pool (GP-2): Members of this pool are probably normally classified as different species than the crop species under consideration (the primary gene pool).

• Tertiary gene pool (GP-3): Members of this gene pool are more distantly related to the members of the primary gene pool. The primary and tertiary gene pools can be intermated, but gene transfer between them is impossible without the use of "rather extreme or radical measures such as embryo rescue (or embryo culture, a form of plant organ culture) induced polyploidy (chromosome doubling) bridging crosses (e.g., with members of the secondary gene pool).

Genomics-driven approaches to Genebank management

• Pre-breeding can facilitate the characterization and utilization of PGRs.

• Allele mining involves searching useful alleles of genes from a wide germplasm collection.

• Transformation of germplasm collections into bio-digital resource centres like

• DNA Barcoding,

• DNA fingerprinting.

Pre-breeding

• Pre-breeding is the step before practical breeding.

• Aim - To introduce new desirable traits/genes into an adapted genetic background. This will broaden the genetic base in a breeding material in pace with environmental changes.”

• The main link between the germplasm conservation and its use in plant breeding

• A vital contribution of pre-breeding is increasing the total genetic diversity in crops and finding specific genes and traits.

• Main link between conservation of PGR in gene bank collections and utilisation of these resources in agriculture and horticulture.

• Essential for linking genetic diversity arising from wild relatives and other unimproved materials for utilization.

• These activities are a collaboration between germplasm curator and the plant breeder who need to work germplasm collections and how new traits from these collections can bred into new varieties.