eChapters

Mangroves Definition

A mangrove is tree, shrub, palm or ground fern, generally exceeding one and a half meter in height that normally grows above mean sea level in the intertidal zone of marine coastal environment and estuarine regions of the tropical and subtropical coastlines (Duke 1992). The mangrove is also defined as assemblages of salt tolerant trees and shrubs. Mangroves are taxonomically heterogenous and more related to environment than terrestrial or aquatic plants.

The term ‘mangroves’ is used to define both a group of plants and a community. To avoid confusion, Macnae (1968) proposed the term ‘mangal’ for the mangrove forest community, and the term ‘mangroves’ for the plants. Other terms for the mangrove forest community are coastal woodland, oceanic rainforest, intertidal forest, tidal forest, blue carbon forest, mangrove forest, and mangrove swamp.

Generally, mangrove species are grouped into two types: Exclusive and Non-Exclusive. The exclusive species are limited to the mangrove habitat, and they are also referred to as strict mangroves, obligate mangroves or true mangroves. The non-exclusive species are mainly distributed in a terrestrial or aquatic habitat, but they also occur in the mangrove habitats and they are referred to as semi-mangroves, back mangroves or mangrove associates. Tansley and Fristch (1905) are the first to introduce the criteria to classify mangrove species into true mangroves and mangrove associates. Tomlinson (1986) used rigid criteria to distinguish true mangroves from mangrove associates. In his criteria, true mangroves possess all or most of the following features:

Origin and diversification of Mangroves

Mangroves are quite old, possibly arising just after the first angiosperms (Duke 1992). Based on the fossil evidence and recent molecular studies, it is believed that mangroves originated along the shorelines of ancient Tethys Sea and there was a dispersal along the Tethys seaway westward into the Atlantic and further into the east Pacific (long before the closure of the Panama Isthmus) and eastward into South east Asia and Australia during the Late Cretaceous or early Eocene around 80 million years ago (Duke 2006). Nypa seems to be earliest fossil evidence. However, prior to closure of Tethys sea, around 40-55 million years ago, the mangrove genera - Nypa, Acrostichum, Rhizophora, Avicennia, Pelliciera, Sonneratia, Bruguiera, Ceriops, Heritiera, and Aegiceras - were present around shoreline (Duke 2017). The closure of Tethys Seaway by the mid-Tertiary (34-50 Million years ago) by northward movement of African landmass, created a physical barrier that completely terminated the Atlantic East Pacific (AEP) and Indo-West Pacific (IWP) exchange route, and resulted in subsequent diversifications within the AEP and IWP regions influenced by region-specific events (Ellison et al. 1999; Duke 2006). The plate tectonics and other vicariant events like Pleistocene sea level rise are attributed to the current distribution pattern and disjunct distributions of species within genera. Duke (2017) hypothesised two separate westward dispersal routes in AEP: (i) a southern path along the coasts of West Africa, South America and, (ii) a northern path along the North American east coast, whereas he hypothesised two isolated pathways in IWP towards eastward dispersal: (i) a northern path along the coast to the Middle East, Southeast Asia and, (ii) a southern path along the coasts of East Africa, India, and Australia. Further he noted that collision of India and Australia with Middle East and Southeast Asia respectively, resulted complication in dispersal route. Based on the available records it is presumed that diversification of mangrove plants has largely been driven by three key processes of speciation viz., Allopatric speciation, Peripatric speciation and Parapatric speciation (Duke 2017).

Distribution of Mangroves in India

Mangrove forests in India are found along the coastline of 9 States and 4 Union Territories (Fig. 5). The mangrove habitats are broadly classified into three namely, Deltaic (Eastern Coast Mangroves), Estuarine & Backwater (Western Coast Mangroves) and Insular mangroves (A & N Islands) (Mandal and Naskar 2008). India has a total mangrove cover of 4975 km²; of which, 57% is present along the east coast (Bay of Bengal); 31% along the west coast (Arabian Sea) and the remaining 12% in the Andaman and Nicobar Islands (FSI 2019).

West Bengal

In West Bengal, mangroves are present in Sundarbans, the large deltaic complex of three major rivers, the Ganges, Brahmaputra and Meghna, and 62% of total area is shared by Bangladesh and 38% by India. The Sundarban Biosphere Reserve (SBR), at the confluence of the Bay of Bengal covering an area of 9,630 km², lies between 21°40′N and 22°40′N latitudes and 88°03′E and 89°07′E longitudes, spreading in districts of South and North 24-Parganas in West Bengal, India. The major portion of SBR is designated as Reserve Forest, covering nearly 4260 km² and the area under mangrove vegetation is 2112 km² (FSI 2019). Compared to 2017 assessment there has been a decrease of 2 km² area of mangroves. The mangroves and their associates in the SBR exhibit great generic and species diversity and it is abode to rare and highly endangered flora and fauna, as well as, the only mangrove-tiger (Royal Bengal Tiger - Panthera Tigris tigris) kingdom in the world. Recognizing importance and uniqueness, the United Nations Educational, Scientific and Cultural Organization (UNESCO) declared the Indian part of Sundarbans as a ‘World Heritage Site’ in 1987, and also designated the ‘Sundarban Biosphere Reserve’ under the UNESCO Man and the Biosphere (MAB) program in 2001. Recently, Sundarbans has been declared as a Ramasar Site, considering ecological significance. Totally 33 true mangrove species belonging to 21 genera and 13 families have been identified in Indian Sundarbans. Among the mangrove species listed, Rhizophora apiculata, Bruguiera parviflora, Ceriops decandra, Kandelia candel, Aglaia cucullata, Excoecaria indica, Xylocarpus moluccensis, Xylocarpus granatum, Heritiera fomes, Scyphiphora hydrophyllacea, Brownlowia tersa, Nypa fruticans, Acanthus volubilis, Dolichandrone spathacea and Phoenix paludosa are under serious threat in Sundarbans (Kathiresan 2008; Gopal and Chauhan 2006). Particularly Heritiera fomes (locally called Sundari, from which Sundarbans derives its name), Nypa fruticans and Phoenix paludosa are declining rapidly due to the reduction of freshwater input (Gopal and Chauhan 2006).

Mangrove forests are ecologically significant and economically important (Kathiresan 2018). They provide ecosystem services worth at least US$ 1.6 billion each year and support coastal livelihoods worldwide (Costanza et al. 1997). They serve as the nursery, feeding and breeding grounds for crabs, prawns, molluscs, finfish, birds, reptiles and mammals. A large amount of global fish catches (up to 80%) is dependent on mangroves, thereby ensuring the food security of coastal people (Ellison 2008). The mangroves provide firewood, timber, cattle feed, honey, medicines and tourism development. They protect groundwater aquifers from seepage of seawater, thereby ensuring water security for coastal population. Mangrove forests remove coastal pollution particularly toxic heavy metals. They offer coastal protection against the fiery effects of natural calamities such as tsunami, storm surges, cyclone and floods (Kathiresan and Bingham 2001; Kathiresan and Qasim 2005; Kathiresan and Rajendran 2005). The potential of mangroves in carbon capture and sequestration is remarkable in mitigating the impacts of global warming and climate change (Kathiresan et al. 2013, 2014).

Threats

There are sixteen threat factors have been identified from Indian mangroves (Kathiresan 2010). However, habitat conversion for agriculture and aquaculture activities, environmental pollution by upstream anthropogenic activities, Climate change processes (e.g. sea level rise; increasing frequency of cylones, etc.) are the major threat factors for mangroves. Mangroves are able to cope up with short-term oscillations and long-term fluctuations of climatic conditions, but the consequences of global climate change, such as increased extreme events, will have unprecedented effects on biota and threaten the resilience and recovery potential of the ecosystems (Harris et al. 2018; Sippo et al. 2018). Despite conservation measures, the mangroves still experience an annual loss of 0.2-0.7% during 2000-2012 and they remain the most threatened ecosystem of the world (Hamilton and Casey 2016).

Origin

The world ‘Communication’ comes from the Latin word ‘communis’, meaning common. This implies that when we communicate, we are trying to establish ‘Commonality’ with someone through a message. Communication, then, is a conscious attempt to establish commonality over some idea, fact, feelings and the like, with others. In essence, it is a process of getting a source and a receiver tuned together for a particular message or a series of messages.

Aristotle, Shannon and Weaver, Schramm, Berlo, Westly and Maclean, Leagan, Rogers and Shoemaker, Littererls model and Dance’s Helical Model-Elements of communication-communication barriers

Introduction

Models are symbolic representation of structures objects or operation. They can be used to show the size shape or relationship of various parts or components of an object or process. It helps to explain the working of a system. A model helps to get a whole idea of the system.

Model help to illustrate, predict and explain the concept

They can be structural or process oriented

Make us to understand the way how to interpret the process

Verbal communication-definition and meaning-Verbal vs Oral communication - Types-Styles-Barriers to effective verbal communication

Meaning

Verbal communication takes place directly between the superiors and juniors in organizations and between farmers and extension functionaries in the field and is often known as face to face communication. It takes the form of talks, a public address, verbal discussions, telephonic talks, telecommunications and other forms such as audio-visual aids speeches and orders, holdings of meetings and conferences, lectures, social get-togethers, training sessions, public address systems, museums, counseling etc.

Definition

The Verbal Communication is a type of oral communication wherein the message is transmitted through the spoken words. Here the sender gives words to his feelings, thoughts, ideas and opinions and expresses them in the form of speeches, discussions, presentations, and conversations.

Verbal vs Oral communication

Verbal Communication - Oral: It consists of spoken messages which include exchange of ideas, questions or comments. Few examples of verbal (oral) communication are face-to-face conversations, group discussions, counselling, interview, radio, television, calls, etc. Man is the only privileged species which can use language. Language is mostly used in speech and writing comes later. Oral communication has much wide and acceptable use when compared to written communication. As a part of everyday life, in informal relations or formal organization, we communicate more orally than in writing. Oral communication is a building block of human relations. Without oral communication, any interaction is lifeless. Thus, its importance cannot be ignored.

Verbal Communication - Written: This type of verbal communication does not require speech or sound. Though technically, written communication is nonverbal, it falls under this category as it includes the use of words and language. Few examples of verbal (written) communication are books, letters, text, newspapers, etc.

Definition and meaning – Proxemics, Chronemics, Movement and body position, Posture, Facial Expression, Gestures and Eye Contact – importance of non verbal communication

Meaning

A message can be sometimes expressed without the help of words. Nonverbal communication is the process of communicating without the use of words.

Definition

It is defined as non-word human responses like facial expressions and gestures and the perceived characteristics of the environment through which the human verbal and nonverbal messages are transmitted. Nonverbal communication is also known as “silent language.” It involves the use of cues, gestures, vocal characteristics, facial expressions, and spatial relationship between the sender and the receiver to convey a message. For example, a smile, glance, stare or a frown convey different meanings.

Definition – Listening vs Hearing – Active listening – Types of listening – Guidelines for effective listening – Developing listening skills - Barriers to listening – Listening misconceptions.

Listening skill is key to receiving messages effectively. It is a combination of hearing what another person says and psychological involvement with the person who is talking. Listening is a skill of Language. It requires a desire to understand another human being, an attitude of respect and acceptance, and a willingness to open one’s mind to try and see things from another’s point of view. It requires a high level of concentration and energy. It demands that we set aside our own thoughts and agendas, put ourselves in another’s shoes and try to see the world through that person’s eyes.

Introduction

Listening is a language modality. It is one of the four skills of a language i.e. listening, speaking, reading and writing. It involves an active involvement of an individual. Listening involves a sender, a message and a receiver. It is the psychological process of receiving, attending to constructing meaning from and responding to spoken and/or non verbal messages.

Importance-Effective writing -Components of writing : Introduction , Audience and format, Composition and style, Structure, Grammatical errors, Proofing and Conclusion-Ways to improve writing skills -Technical writing.

A written communication is always put into writing and generally used when the audience is at a distance or when a permanency or record is required or where its preservation is essential in case it is needed as a evidence in cases of dispute. It is generally in the form of instruction, orders, rules and regulations, policies, procedures, posters, memos, reports information bulletins.

Importance of writing skills

1. Expression

Writing is one of the important ways of expressing your thoughts, and communicating ideas and views to others. Some have the innate ability to put their thoughts into words. Writing is more beneficial, specifically for those who are emotional, and do not express verbally. This tool allows them to express their ideas, thoughts or their existing mental condition, which otherwise, may not be possible. People express themselves by writing novels, short stories, biographies and even personal diaries, etc.

2. Judgment of a person

Often, a person is judged by the quality of writing, he/she possesses. Be it a school, college, workplace or a society, writing has become a vital yardstick to assess one’s knowledge and intellectuality. When we come across a person who is prim and proper, we immediately make an impression about that person being careful, responsible and sincere. Similarly, if the writing is devoid of mistakes, we tend to create a good impression about the writer.

Basics of effective oral presentation : Planning , preparing (Introduction, Body and conclusion), Delivery, Body language and Handling anxiety-Strategies for giving oral presentation

Oral presentation means delivering an address to a public audience. It also refers to public speaking and/or speech-making. It is a brief discussion of a defined topic delivered to a public audience in order to impart knowledge or to stimulate discussion. The skill in oral presentation is equally as important as effective writing. Almost every oral presentation contains an introduction, main body and conclusion like a short paper. Though it is a formal speech in nature or vocal performance to an audience, it may occasionally require adequate planning and thorough preparation in using one’s voice, body language and visual aids such as slideshows to present and illustrate the points more effectively and to achieve the desired results.

Body languages such as eye contact, facial expression, posture and gesture plays a significant role in oral presentation process. The proper use of the voice and the ability to adjust it to suit the slightest differences of meaning are also very important in oral presentation. In addition to correct pronunciation, variation in pitch and cadence, free from speech mannerism, fluency in delivery are also very important in oral presentation.

Definition – Components to be included – Parts of field diary – Field diary in social sciences.

The field diary is the basic document which contains all the data collected. Facts and interpretations are to be written separately and conversations to be noted in the vernacular languages. Two kinds of field notes are to be observed a) Taking notes on the spot b) Writing detailed diary.

Daily field diary

It is instructed to write the field diary everyday in which a) Detailed notes of observations b) Field notes on discussion and conversations c) Details of Interpersonal communication, gossips, fold history‘s similar events d) Specific details of special events Specific reference about the main field of study for instance, the details about the process of message diffusion, various kinds of channels of communication were described in detail.

Field diary for research process documentation

The most useful tool for a process documenter is a field diary. The documenter uses a field diary to record his or her observations and thoughts in an orderly fashion. Recording observations and impressions enables a researcher to pick up clues about how the system is operating. A field diary should help the investigator understand the systems physical and social setting. It should help describe who, what, why, where, when and how. Who refers to the people or system being studied. What concerns the information gathered. Why, where, when and how provide important details about the observation.

There is no special format in writing a field diary but entries should be written daily in chronological order so information is not forgetten or changed because of forgetfulness. The critical concern is that observations are recorded in a diary regularly.

Definition-Importance of keeping a lab record-Features of a lab record - Contents of lab record-Guidelines for keeping a lab record

Definition

It is a primary record of research. Researchers use a lab note book to document their hypotheses, experiments and initial analysis or interpretation of these experiments.

Laboratory Record

The following is a general description of how to keep a proper laboratory notebook. Requirements for different teaching, research, clinical, or industrial labs will most likely vary. Some institutions/labs will require less stringent record keeping, others will hold you to a very strict protocol. A well kept notebook provides a reliable reference for writing up materials and methods and results for a study. It is a legally valid record that preserves your rights or those of an employer or academic investigator to your discoveries. A comprehensive notebook permits one to reproduce any part of a methodology completely and accurately.

Indexing is the act of describing or classifying a document by index terms or other symbols in order to indicate what the document is about, to summarize its content or to increase its findability. The function of indexing in libraries and information retrieval systems is to indicate the whereabouts or absence of items relevant to a request. It is essentially a time-saving mechanism. Theoretically, we can always find the relevant items by an exhaustive search through the whole collection (assuming that we can recognize what is relevant when we see it). Since this is economically impossible, the size of the store to be examined is reduced by classification, using this term in its very broadest sense, i.e., as the recognition of useful similarities between documents.

Indexing performs an indispensable service to the filing function. Index, is a reference list used for locating a particular document in the filing equipment. Similarly, while filing a document, the index aids tracing out the place where the particular paper should be filed. Particularly when a large number of files are maintained for various purposes, index is very essential.

Indexes are constructed, separately, on three distinct levels: terms in a document such as a book; objects in a collection such as a library; and documents (such as books and articles) within a field of knowledge. Subject indexing is used in information retrieval especially to create bibliographic indexes to retrieve documents on a particular subject. Examples of academic indexing services are Chemical Abstracts and PubMed. The index terms were mostly assigned by experts but author keywords are also common.

A footnote is a notation at the bottom of the page in a printed document. Footnotes are usually presented in smaller print than the dominant text, and they are used for a variety of purposes. The “foot” in “footnote” refers to the fact that the notation is located in the “footer” or “bottom” of the document. A similar concept is the endnote, a note which is provided at the end of a document, rather than at the bottom of a specific page. When a text has footnotes, they are indicated with various symbols or superscript numbers. The asterisk symbol, *, is a common symbol for footnotes, but a variety of symbols including daggers, †, may be used. In a text with a lot of footnotes, numbers are usually used to indicate footnotes, so that the reader can keep track of what is going on. Endnotes are typically indicated with numbers, to make it easier for people to look them up.

Different style manuals have different rules about using footnotes, and it is important to follow style guidelines when submitting material for publication. Because footnoting can get very complicated, most style guidelines devote at least a few pages to the footnote. Some people avoid using footnotes at all, while others relish footnotes, because footnotes provide a great degree of freedom when they are used well.

Reading is a means for language acquisition, communication and sharing information and ideas. Reading skill is considered to be most rewarding skill. Reading is not merely going through a book or a magazine or a journal. Reading is the process of gaining meaning from print. It Demands different types of skills depending on readers’ needs & requirements. Though lot of books discuss quite a number of reading skills-major part of reading skills - useful to students both for academic & professional purposes.

There are different types of reading.

They are:

1. Intensive reading

It’s a detailed reading. When we read our text books/newspaper/ report of great interest, we read sentence by sentence, trying to find out meaning of difficult words by reading in detail. Intensive reading has to be done when we do close texts or reading comprehension passages in exams or in classroom sessions.

2. Extensive reading

It contains longer texts. It should not be read sentence by sentence but we skip certain portions and find out overall meaning of text. When we read novels, magazines & newspapers, etc. we can do this type of reading. Extensive reading texts are generally meant for pleasure and they need overall global understanding.

3. Selective reading

Select to read news items that interest us. For many students sports page interests them. Within this column, another selection by reading about the game in which they are interested. Similarly scientists read topics which belong to their field. In these examples prior knowledge, technically called schema, acts. Sometimes people make a survey and find out what text is about. At times people make a survey when they do scanning.

Derivation & Meaning-Skills required-Method or procedure-Guidelines; Summarising-Meaning-Steps to write a summary.

Derivation

‘Precis’ is a French word which means to cut off, to be brief.

Meaning

A precise is a summary or the gist of the main ideas of written matter. Thus, precise writing means summarising. It is an exercise in concentration, comprehension and condensation. In order to make a summary of an article, a speech or a story, one has to read it carefully and grasp its meaning. Precise-writing forces one to concentrate on the material which is to be summarised. In summarising a passage, though the length of the precise is not fixed, it is generally expected that the it should be one third the length of the passage. The summary is known as precise and precise writing means summarising. A precise is not a paraphrase. At the same time, the essential points of the main passage must be presented in the precise in such a manner that reader may easily grasp the main ideas of the passage.

A better precise can be written with more and more practice. Before writing a precise, it is important that you take care of a few essential points.

Also, make sure that all the important points of the passage are conveyed in the precise. Focus on language and try and make it as clear, crisp and concise as possible. There is no fixed pattern to write a precise. But we must follow certain rules and procedure so that the precise can be more effective. Follow the right diction and you will be able to write a good precise.

Definition-Purpose of abstract-Types of abstract-Abstract Styles-Steps for Writing Effective Abstracts- Some Do’s Don’ts in preparing abstracts.

Definitions

The word abstract comes from the Latin word abstractum, which means a condensed form of a longer piece of writing. Abstracts are important parts of reports and research papers and sometimes academic assignments. The abstract is often the last item that you write, but the first thing people read when they want to have a quick overview of the whole paper. We suggest you leave writing the abstract to the end, because you will have a clearer picture of all your findings and conclusions.

An abstract is a paragraph that provides an overview of a paper. Abstracts should be between 100 and 200 words long and usually contain a list of keywords at the end to help readers identify the main points of the paper. While abstract requirements differ across academic disciplines, there are two main types of abstracts: humanities abstracts and scientific abstracts.

Purpose of abstracts?

Abstracts typically serve five main goals:

Meaning-Steps for individual presentation; Group presentation-Meaning-Stages of group presentation; Impromptu presentation.

A Presentation is the process of presenting a topic to an audience. It is typically a demonstration, introduction, lecture, or speech meant to inform, persuade, inspire, motivate, or to build good will or to present a new idea or product.

Individual Presentations allow a person to completely control the thoughts, ideas, and methods of presenting without outside influence. Individual presentations allow someone to work at their own leisure and pace.

The practice of showing and explaining the content of a topic to an audience or learner is known as presentation. A presentation is a process of offering for consideration or display.

Presentations can also be categorized as expository or persuasive. They can also be impromptu, extemporaneous, written, or memorizes. But it’s more important to focus on their purpose. There are three basic purposes for giving presentations:

Meaning – Points to be considered in public speaking – Effective public speaking: Group Discussion: Meaning – Procedure – Advantages – Limitations; Seminar Conferences: Definition and meaning – Steps in organizing seminar / conferences/ symposium / workshop

Definition

Public speaking is the process and act of speaking or giving a lecture to a group of people in a structured, deliberate manner intended to inform, influence, or entertain a listening audience. Public speaking is commonly understood as face-to-face speaking between individuals and an audience for the purpose of communication. It is closely allied to “presenting”, although the latter is more often associated with commercial activity. Most of the time, public speaking is to persuade the audience.

Public speaking can serve the purpose of transmitting information, telling a story, motivating people to act or some combination of those. This type of speech is deliberately structured with three general purposes: to inform, to persuade and to entertain. Knowing when public speaking is most effective and how it is done properly is a key part in understanding the importance of it.

Points to be considered in public speaking

1. Prepare to succeed

The single most important thing you can do to make your next presentation successful is to be prepared. That means make time for some serious practice. Experts suggest you spend 60% of your time to prepare your content and slides and 40% of your time to practice.

2. Say it correctly

Part of good preparation is double-checking the pronunciation of any tricky words—especially jargon. Your correct pronunciation and knowledge of industry terms lends credibility to your presentation.

Introduction

The health and wellness continue to drive growth in the global food industry as the consumers are constantly looking for the foods, beverages and other dietary solutions that will help them more aggressively to meet their own unique nutrition and personal health goals. Worldwide countries are going through a nutritional transition and are now affected by double burden of problems like nutritional and food security. The common alarming problems are under nutrition and specific nutrient deficiencies simultaneously coupled with imbalanced diets and chronic diseases. The problem of chronic diseases, non-communicable diseases (cardiovascular diseases, respiratory diseases, diabetes, obesity, cancer etc.) and malnutrition is more serious in the developing countries. The lack of access to health services, sufficient income, healthy and nutritious foods characterize majority of poor people in developing countries. So, food is not only the solution but also viewed as a product to enhance health and wellbeing, and it encourages the producers by supplying new goods that meet these needs. From the past decade, there has been growing consumer awareness regarding health, nutrition and the food safety which are often triggered by specific food incidents, especially in the developed countries and high-income groups in such countries. In the food industry there have been two broad trends which are hazards in the food chain and nutritional profile of the food. There has been recognition that hazards and contaminants can enter the food chain and can cause sickness, death and diseases, and so governments, often to deal with consumer and industry concerns, establish regulations and standards on food hazards including standards on pesticides, antibiotics, microbiological hazards and other chemical and physical contaminants. On the other hand, there is also a growing awareness of the health-enhancing properties for prevention and treatment of health concerns beyond the basic nutritional component of many foods.

Introduction

Society is dynamic. The requirement of society varies in course of time. During the life process human being faces lots of health hazards which are mostly due to intake of various foods. So people become cautious about the intake of food and think about the quality of foods which can protect the health of human being. In ancient times people made medicines from plant extracts to protect their health. In 1989, Dr. Stephen coined the term “Nutraceuticals” which is combination of nutrition and pharmaceutical. Nutrition is required for health and pharmaceuticals provide remedy for sickness. So it is a preventive approach. Nowadays, the definition of nutraceuticals has been expanded to include vitamins, minerals, herbs and other botanicals, amino acids, and dietary substance for human use as a supplement diet (Stauffer, 1999).

Nutraceuticals are dietary supplements made only from whole foods to augment health. Currently over 470 nutraceutical and functional food products are available with documented health benefits (Brower, 1999). The patients are much aware about the side effects of chemical agents in short and long term therapy. So to avoid medicine used for small diseases, new therapies came into trend with the help of nutritional approaches i.e. “Nutraceuticals”. The use of nutraceuticals becomes easier than pharmaceuticals since nutraceuticals does not require any animal verification for its use in human. Nutraceuticals,

Functional foods and Dietary Supplements are most important concept in food science. They have distinction amongst themselves.

Introduction

Our traditional knowledge of medicine has been one of the strongest areas of research because of our rich heritage in herbal plants & great biodiversity in our fauna & flora. Consumption of plant foods and the structurally diverse natural products provided by them have long been associated with health-protective and therapeutic effects. Natural products in plant foods have been shown to have pleiotropic therapeutic and chemopreventive properties. These bioactive products are known to potentiate the efficacy of other drugs and have synergistic effects too. Most of the prescription drugs discovered so far is from plant sources and 75% drugs had been claimed in folklore claims and traditional medicinal system (Reynold, 1991; Benowitz, 1996). The traditional Indian medicinal system utilizes multicomponent formulations of plant extracts which may either act synergistically or avoid many side effects and might have added up trace element through combination of different plant extracts which could have additive effects. However the effort to utilize traditional knowledge in the light of modern scientific findings is lacking in India. Accumulating evidences as well as in-vitro studies implicates inverse relationship between regular consumption of fruits vegetable and the risk of specific cancer. Diet derived nutritional compound mediated interventions in the process of tumorigenesis may be promising chemopreventive strategy with minimal toxicities to the physiological system.

Introduction

Consumers are nowadays very much concerned about the food they purchase and consume. Consumer wants the food containing antioxidant properties or can say functional food in safe and stable forms, so that the availability of daily requirements of functional food ingredient must be ensured for normal growth and development of the body. The functional food that can provide a health benefit such as increased dietary fibre, vitamins or minerals to the body. The incorporation of antioxidant compounds acts as an efficient way to fight against reactive oxygen species (ROS) generated in our body. As it is already known that the ROS causes oxidative stress and acts as a main trigger for different life threatening chronic diseases like cancer, diabetes, cardiovascular disease, aging etc. Therefore, seeing the consumers’ demand for value added products with bioactive ingredients, all small and large scale food industries are taking initiatives to process different types of food (fruits, vegetables, dairy, sea food, animal, microbial products etc.) to extract and purify its active fraction of functional ingredients to valorize different value added products. Functional ingredients may also be derived from different food wastes generated during processing of food. This practice provides additional economic benefits to food businesses. Food industries are also giving importance to different processing methods to extract high quality of functional food ingredients in large quantity because processing method affects the concentration of extracted bioactive compounds. The simple addition of functional ingredients may cause an unwanted and negative change of sensory and texture of food. Therefore, using novel processing technologies such as microencapsulation, the negative changes could be minimized or avoided because these technologies could prevent the inactivation of bioactive ingredients.

Introduction

Fruits contain various beneficial compounds that possess biological activities and can be used as pharmaceutical nutraceutical products. Most of the fruits contain polyphenolic components that can promote antioxidant potential on human health. Wild Blueberries, strawberries, plums, oranges, grapes, cherries and mangoes are rich in antioxidant. Additionally, anti-inflammatory, antibacterial, antifungal and chemopreventive effects are associated with the various fruits. Besides polyphenols, other compounds such as xanthones, carotenoids, saponins also exhibit health effects. Fruit consumption is considerably increasing in the daily diet because they supply high levels of biologically active compounds that impart health benefits beyond basic nutrition. Fruits provide an optimal mixture of antioxidants such as vitamins C and E, polyphenols and carotenoids, vitamins, phytoestrogens, glucosinolates and anthocyanins. Diets rich in fruits may help to delay the ageing processes and reduce the risk of certain types of cancer, cardiovascular diseases and other chronic diseases. The combination of vitamins, minerals, phenolic, antioxidants and fibre seems to be responsible for these effects. The most dietary components in fruits acting as antioxidants are fibre, polyphenols, conjugated isomers of linoleic acid, D-limolene, epigallocatechin, gallate, soy protein, isoflavones, vitamins A, B, C and E (group of tocopherols), calcium, selenium, chlorophyllin, alipharin, sulphides, catechin, tetrahy-drocurecumin, seasaminol, glutathione, uric acid, indoles, thiocyanates and protease inhibitors.

Introduction

Functional elements are non-conventional biomolecules in foods that have the ability to modulate one or more body metabolic processes or pathways, leading in health advantages and well-being promotion. Research has demonstrated a connection between food, health and well-being functional elements. Consequently, functional elements have health-promoting roles connected with multiple progressive steps at various phases of disease control, from initiation to growth. They can therefore be implemented efficiently in disease therapy and prevention. Therefore, the borderline between food and medicine is becoming very thin at a moment when the role of a healthy diet in stopping non-communicable diseases is well recognized. Functional elements include plant-derived, non-nutritious and biologically active chemicals that operate in the body to avoid certain non-communicable diseases from occurring.

Food contains over 900 phytochemicals. One fruit or vegetable serving (about 120g) can contain as many as 100 distinct phytochemicals. Previously, functional elements were believed to happen predominantly only as phytochemicals in plant products including whole grains, fruits and vegetables. However, in animal goods such as milk, fermented dairy products and cold water fish, probiotics, conjugated linolenic acid, long-chain omega-3, −6 and −9 polyunsaturated fatty acids and bioactive peptides are also discovered. Usually, functional elements happen in various forms in food such as glycosylated, esterified, thiolated or hydroxylated materials. They also have numerous metabolic operations that enable positive impacts in the body on several illnesses and target tissues (Balic et al. 2020).

Introduction

Pulses are annually grown leguminous crops that yield one to twelve grains/ seeds within a pod, and are often promoted in diet owing to their low cost and many beneficial nutritional effects (Craig 2009). The United Nations general assembly has declared 2016 as the international year of pulses (Oyeyinka et al. 2016). The Food and Agriculture Organization (FAO) describes pulses as the crops that are harvested only for dry grain. This definition excludes crops that are harvested green as food sources (such as green beans and green peas), crops that are used only for sowing purposes (such as alfalfa and clover) and crops used primarily for oil extraction (such as peanuts and soybean). India is the largest producer (around 25%) of pulses in the world and the Indian subcontinent covers the leading area in terms of consumption of pulses. It was also suggested that India can also increase the production output by 30%, considering a rise in government support prices for stimulating the growth of pulses and in case of a normal monsoon season (FAOSTAT 2008). The mainly grown pulses in India include mungbean (green gram), chickpea (Bengal gram), urd bean (black gram), lentil (masur), pigeon pea (arhar), cowpea, horse gram and peas (Tiwari and Singh 2012). In the western countries, nowadays pulses are one of the preferred food sources of the population, owing to ideological reasons and interest in vegetarian diet.

Introduction

Biological activation of grain or germination is a natural, biological processing techniques and traditional method that can be used to improve the nutritional, functional, and sensory properties of grains. During biological activation of grains, extensive phytochemical changes were reported in a variety of food grains, which reflects a dynamic and complex nutrient flux including remobilization, degradation and accumulation. During this process many hydrolytic enzymes were activated to hydrolyze the starches, proteins and, non-starch polysaccharides, which results in more oligosaccharides and free amino acids. Many nutrients and bioactive compounds reportedly increase and then decrease as they are utilized by the growing plant, which results in degradation of the high molecular weight polymers for generation of bio-functional substances. The biological activation of grains also realizes a significant growth of nutritional value by increasing the bioavailability of nutritional compounds, vitamins, bio-elements and other biologically active substances due to the partial hydrolysis of starch, proteins, hemicelluloses and even celluloses. Biological activation triggers the enzymatic activity in grain and dormant hydrolytic enzymes are activated, breaking down starch, fibers and proteins and leading to an increase in the amount of digestible compounds along with improvement of functional properties without any chemical modification. Also, the activity of some anti-nutritional factors (enzyme inhibitors, haemagglutinins, anti-vitamins etc.) decreases or disappears during activation, allowing a complete valorization of biological compounds in grains. During biological activation hydrolytic amylase enzymes, proteolytic enzymes, and catalase were activated in grains, which enhances the starch degradation, a complex biochemical process and thus lead to the conversion of insoluble granules to soluble starch and dextrin. Apart from positive shifting in the level of nutrition, biochemical activities which occur during activation also generate bioactive components of health-promoting activities through the enzymatic actions that are antioxidants in nature, such as ascorbic acid, tocopherols, tocotrienols and phenolic compounds, thus resulting in an increase of antioxidant activity.

Introduction

India is considered as the “Home of Spices”. They are a prized group of minor components and have been an integral ingredient of Indian diet. Since antiquity, spices form an important part of the Ayurvedic Pharmacopoeia (The Indian System of Medicine), with their widespread traditional use. With its wide climatic conditions and topographical features, India naturally possesses wide variety of medicinal flora. The country enjoys the distinction of being the largest producer and consumer of spices as well as the fastest growing spice market in the world.

Spices are potent plant foods that possess a wide range of nutrient bioactive compounds that contribute to improve health, while adding variety, colour, flavour and aroma to daily diet. The term spice or condiment applies to “such natural plant or vegetable products or mixtures thereof, in whole or ground form, as are used for imparting flavour, aroma and piquancy to and for seasoning food” (Sikri and Berwal, 2008).

Webster (2011) describes spices as ‘Any of various aromatic vegetable productions as pepper, cinnamon, nutmeg, mace, allspice, ginger, cloves, etc., used in cookery to season and to flavour sauces, pickles, etc.; a vegetable condiment or relish, usually in the form of a powder; also, as condiments collectively’.

Introduction

Food ingredients sector is indicating ample prospects for growth. The segment is an obligatory element for the growth of the food and beverage sector. These ingredients are also driving the development of the healthy functional foods industry to increase by 20% growth annually. Innovation in the food and beverage market, especially in the processed food domain, has created innumerable opportunities for new product development in the ingredients market as well. The segment is driven by the growing food processing industry and India is emerging as ingredients bowl of the future. Additionally, growing urbanization coupled with industrialization and changing lifestyles have led to growing demand for convenient food that offers health benefits, over and above the basic nutritional benefits of the foodstuff. There are nearly 10 to 15 broad classes of ingredients that include the very basic ingredients as well as certain value added ingredients that have niche applications. Key ingredients are preservatives, flavours, colours, hydrocolloids/stabilizers, emulsifiers, artificial sweeteners and value added health food ingredients such as omega-3-fatty acids prebiotics, probiotics etc. Until recently, there has been limited research into functional foods in meats, while functional foods in the dairy sector have been developed to a high degree. But meat is less allergenic than many other foods and much more research into the development and marketing of novel functional meat products is required. Such meat products would open up a new market for the meat industry. Nutraceutical and functional food industry is a very vibrant industry today with the claims and a clear mandate of health, wellness and prevention of diseases as one of its main goals.

Introduction

Increasing knowledge regarding the impact of diet on human health along with state-of-the-art technologies has led to significant nutritional discoveries, product innovations, and mass production on an unprecedented scale. In particular, naturally occurring bioactive extracts or single compounds thereof, that are believed to benefit human health, have spawned an important and dynamic new area of research resulting in substantial advances in nutritional knowledge. There is also growing awareness that dietary source and form of food may affect overall health. Suitably, the role of food as an agent for improving health has been recognized, initiating the development of new classes of food, known as functional foods (Honkanen 2009).

The concept of functional foods is to improve the general conditions of the body and decrease the risk of illness and disease. That is to say, bioactive compounds present as natural constituents or as fortificants in food having the potential to provide health benefits beyond the basic nutritional value of the product. Marine-derived nutrients and other marine bioactive components have excellent potential as functional food ingredients as they possess advantageous physiological effects, with medicinal characteristics and added health benefits such as anticancer or anti-inflammatory activity.

The marine world, due to its phenomenal biodiversity, is a rich natural resource of many biologically active compounds such as polyunsaturated fatty acids (PUFAs), sterols, proteins, polysaccharides, antioxidants and pigments. Many marine organisms live in complex habitats exposed to extreme conditions and, in adapting to new environmental surroundings, they produce a wide variety of secondary (biologically active) metabolites which cannot be found in other organisms. Moreover, considering its great taxonomic diversity, investigations related to the search of new bioactive compounds from the marine environment can be seen as an almost unlimited field.

Introduction

In recent years, food scientists, nutritionists and health experts have become more inclined towards functional food components present in various food sources due to their positive influence on health, which is beyond providing the basic nutrition.Nowa days, generalconsumers are also seeking healthier food options because of nutritive food habits and awareness. Therefore, it has triggered the studyof food and deep mining of food components from nutritional and health benefit’s perspective also. Functional food ingredient can be defined as any componentwhich is more than a source of nutrient i.e. provides additional specific health benefits. Milk is well known to exert positive effect on human health, provides nutrition and widely consumed all across the globe in form of either milk or milk products. As per the definition, milk is heterogeneous blend of lacteal secretion which contains various elements that displays wide range of chemical and functional activities. It has been more than a source nutrition and supplement to different age groups either neonates, youngsters or grown up peoples (Park, 2009). It is one of the basicelements of many diets either in its native form or fermented form which every class of people can afford and had evolved as one of the important nourishment sources. Milk in its native form contains fewer bioactive components while fermentation process produces numerous secondary metabolites which possess various health-beneficial properties (Stanton et al., 2005).

Introduction

During the first 50 years of the 20th century, scientific focus was on the identification of essential elements and their role in the prevention of various dietary deficiency diseases. This emphasis on nutrient deficiencies or “undernutrition” shifted dramatically, however, during the 1970s when diseases linked to excess and “overnutrition” became a major public health concern. “Let food be thy medicine and medicine be thy food”, the age old quote by Hippocrates is the ideology of today’s health conscious population. Eli Metchnikoff, the Russian Nobel prize winner was the first one to recognize the beneficial role of selected bacteria on gastrointestinal tract of humans. Subsequently the “Theory of Longevity” by Metchnikoff was correlated with prolonged youth and a healthy old age, observed largely in Balkan peasants of those times, who used cultured milks in their diet (Kaufmann, 2008). Since then, the quest continues for understanding the role of wide range of food components and nutrients in enhancing health or preventing chronic diseases. The research in this field has resulted in a plethora of new labels for pro-, pre- and synbiotics.

Introduction

Hippocrate, an ancient physician, a great thinker and also often referred as father of medicine, for the first time conceive the idea nearly 2,500 years ago that a disease is caused due to natural factors such as environmental factors, diet, and living habits. He advocated the secret of healthy living in healthy food in his famous quote “Let food be thy medicine and medicine be thy food”. But unfortunately, this wisdom about food has faded with the time and we became dependent on synthetic medicines and drugs for even life style disorders. In the last century, research advancement in the field of food science and nutrition established food not only as a source of nutrition but also a source of active food components that aid specific functions and rejuvenated the Hippocrates concept. According to the Department of Health and Human Services, USA, daily diet of a person, plays a crucial role in 5 of 10 diseases which are the leading causes of death, such as diabetes (noninsulin dependent or type 2), stroke, coronary heart disease (CHD), specific type of cancer, and atherosclerosis. In the mid-1980s, term “functional food” was introduce in Japan and defined as food that contain active components either from plant or animal origin and provide physiological benefits in addition to the basic nutritional needs.

Introduction

The art of fermentation process is developed as far back as thousand years ago without understanding the role of microorganism in it. It is believed that the process of fermentation originates in Indus valley during 7000 – 8000 BC. Archives of harappan civilization showed that different clay utensils were used for the fermented product and the agriculture and animal husbandry were fully developed during that period. It is evident from the artifacts of Egypt and middle east that the practice of fermentation was common in that part (Farnworth, 2003). The earliest practice of cheese making is originated from Falcate between Tigris and the Euphrates rivers in Iraq, 8000 years back. Later, Egyptians developed the use of yeast in wine and bread making during 4000 BC (Ross et al., 2002). Further, Sumarians prepared beer from fermented barley during 1750 BC. Earlier the fermenting process was an artisan way without any knowledge of microorganism. However, the main turning point was in 1608, when Antony Van Leeuwenhoek first established the use of a microscope and revealed the existence of microorganisms. Another, major finding was Pasteurization by Louis Pasteur in 1861 AD and this was the first report that documented the role of microorganism in fermentation. Later, there was a shift observed in the production of fermented food from local communities to large scale industry. The health effect of fermented food was first reported by Roman historian Pliny, who reported that fermented milk is beneficial for gastrointestinal complains. Further, a French paediatrician proved that Bifidobacteria in food prevents infants against infection (Grill et al., 1995).

Introduction

COVID-19, a worldwide pandemic, addresses a deflationary stun for the worldwide economy. The outbreak of coronavirus has had a significant impact on public health worldwide and all stages of various industries’ supply chain and value chain. The 2019 novel coronavirus (2019-nCoV) or the severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) is rapidly spreading from its origin in Wuhan City of Hubei Province of China to the rest of the world. The infection began in bats and was communicated to people by inhalation or contact with infected droplets, and its infection time frame goes from 2 to 14 days. Primary manifestations in hospitalized patients with COVID-19 include fever (98%), cough/hack (76%), and myalgia or weakness (44%). Severe complications include acute respiratory distress syndrome (ARDS), RNAemia, acute cardiac injury, and multiple organ failure. However, exaggerated immune responses may lead to Cytokine Storm. Cytokine storm syndrome includes ARDS, shock, and multi-organ failure (Zheng et al., 2020). Many people are asymptomatic also, and the severity of this disease varies from person to person. The fatality rate is estimated to range from 2 to 3%. Typical/low white cell checks can analyze it with raised C-responsive protein (CRP), periodic modernized tomographic chest examination. The infection spreads quicker than its two predecessors, the SARS-CoV and Middle East respiratory disorder Covid (MERS-CoV); however, it has lower casualty. The worldwide effect of this new scourge is yet questionable (Singhal, T. (2020).

Introduction

Food and nutraceuticals are obtained from various agricultural resources available in this planet. Many types of bio-active compounds are available in small quantities in the plants and animals which are evidenced to improve performance of various organs, increase in immunity and cure for some diseases. Last decade evidences several advancements in developing phytochemical formulations which can be used as a cure for many diseases as well as helps in boosting immunity in human being. Such materials exist in different form, structure and chemical compositions. Examples of such chemicals are phenolic and organosulphur compound (Pascall 2011). The vegetables, fruits and seeds are used without further processing. Some plants are subjected to cooking before its consumption. Many industries are carried out extraction of bioactive compounds and developed products in the form of tablets, powders and liquids which are available in the market. In order to make commercial process more economic and feasible, long term storage of plant residues (Raw materials) as well as the prevention of the extracts emerges as essential requirement for the industries. Moreover, the products requires suitable packaging solution to increase its self-life, preventing it from the influences of environment, and to make viable solution for easy access which makes it more user-friendly. Suitable packaging solution is required for mainly the three reasons: (i) prevention. (ii) protection and (iii) presentation. Prevention is required in-order to avoid deterioration of the packaged items due to microbial growth, loss in moisture and enzymatic action. Protection is required for the purpose of protecting the packaging materials from the contamination as well as from the environment impact and rough handling. Presentation is equally important to provide it an aesthetic look to make it more approachable to the consumers. Moreover, packaging also offers “labelling for easy identification, warnings, instructions, and nutritional information, ease of transportation” (Pascall 2013).

Globalization of economies and liberalization of trade has led an urgent need for prioritizing the potential areas for investment in order to earn handsome amount of income. Even the entrepreneurs, small as well as marginal farmers aspire to take advantage of global opportunity. Diversification to horticultural crops has been found to be best option as they make more profit, generate additional employment for rural masses and conserve natural resources. Agriculture plays a vital role in the Indian economy. Over 52 per cent of the rural households depend on agriculture as their principal means of livelihood. But unfortunately Indian farmers in general are small and marginal land holders with poor resources and realizing income mainly from cereal based production system, which is insufficient to improve their living standards. Agriculture, along with fisheries and forestry, accounts for one-third of the nation’s GDP and is its single largest contributor (www.indianbusiness.nic.in). GVA at Basic Prices for 2019-20 from ‘Agriculture, Forestry and Fishing’ sector is estimated to grow by 2.8 per cent as compared to growth of 2.9 per cent in 2018-19. The GVA estimates of this sector are based on 1^st advance estimates of agricultural production during Kharif season of 2019-20 obtained from the Ministry of Agriculture & Farmer Welfare. For Livestock sector, estimates of production of major livestock products (i.e. Milk, Egg, Meat and Wool) obtained from the Department of Animal Husbandry & Dairying and Fish production data obtained from Department of Fisheries have been used. The crops including fruits and vegetables account for about 56 per cent, the livestock products 30 per cent and forestry & fisheries 14 per cent share of GVA in total GVA of ‘Agriculture, Forestry and Fishing’ sector [As per the estimates released by National Statistics Office, Ministry of Statistics and programme Implementation, GoI, 2020]. Agricultural exports constitute a fifth of the total exports of the country. In view of the predominant position of the Agricultural Sector, collection and maintenance of Agricultural Statistics assume great importance. In 2018-19, India achieved a record food grain production of 285.17 million tonnes beating the previous year’s (2017-18) 285.01 million tonnes, according to data provided by Department of Economics and Statistics (DES). Also, agricultural profitability has increased over the last decade with record increases in MSPs (minimum support prices) for agricultural produce for all covered crops.

Bhatia, (1965) in his study on “Patterns of Crop Concentration and Diversification in India” has observed that physical, socio-economic and technological factors have affected the magnitude of crop diversification. Variations in above mentioned factors are responsible for variations in patterns of crop diversification in India. He has also evolved a new technique for measuring crop diversification in India. He has taken all the crops which are having 10 per cent or more than 10 per cent of the cropped area. He summed up the total area under these crops and divided the sum by the number of crops. According to his method, higher the index, lower is the magnitude of crop diversification and vice-versa.

Ayyar, (1969) in his study “Crop Regions of Madhya Pradesh: A Study in Methodology” has evolved a new technique for measuring crop diversification regions. He has taken all the crops which were having 1 per cent or more than 1 per cent of the total cropped area. Then he divided the sum of crops by the number of crops which are having 1 per cent or more than 1 per cent of the total cropped area. His method is an improvement over Bhatia’s and Singh’s methods for measuring crop diversification.

Patel and Pawar (1980) studied the marketing of fruits in Mahatma Phule market, Bombay. The study showed that there was close relationship between wholesale prices and supply position, whereas there was no such pattern in case of retail prices. The producers’ share in consumers’ rupee was 33.07 per cent for sweet oranges. In case of apples, mangoes and grapes, the share of the producer in consumers’ rupee varied according to the varieties and ranged from 33 to 54 per cent. The study also made some suggestions as standardization and grading, and establishment of cooperative marketing societies for getting better prices for the producers.

The present investigation entitled “Diagnostic Study of Farmers in context of Price spread analysis, marketing pattern and Potential assessment of agricultural diversification in Chenani Block of Udhampur district” was carried out during the year 2015. The sampling structure, experimental procedures and techniques adopted during the course of investigation have been described in this chapter.

3.1 Locale of study

The present study was conducted in Chenani block of Udhampur district in Jammu and Kashmir state. Mantalai, Kosar, Bupp and Bashath villages were randomly selected.

3.2 Climate and rainfall

The Jammu and Kashmir state is situated between 32⁰.17'–36⁰.58' North latitude and 37⁰.26´–80⁰.30´East longitude. The state is the northern most part of the India is girdled by Tibet to the east, China and Afghanistan to the north, to its west is Pakistan. To its south lies the states of Punjab and Himachal Pradesh and have been divided into three agro climatic divisions’ viz. outer plain and outer hills, middle mountains and Kashmir valley and inner Himalayas (Ladakh). The outer plains and outer hills includes Kathua and Jammu districts, extends up to Shivalik hills in the north. According to NARP (National Agricultural Research Project) classification this state has been divided into four agro-climatic zones: Temperate, Sub-tropical, Intermediate and Cold-Arid zone. In summer hot dry winds from plains of Punjab make it very hot, dust storms are common with occasional rain. Rainfall occurs from July to September. Average rainfall is 1143 mm and temperature shoots up to 46⁰C during May to June. During December to February temperature is between 13.5⁰C to 20⁰C, rainfall is 150 mm and in upper reaches there is snow. In the region of middle mountains and Kashmir valley winters are very cold. There is snowfall during winter and subzero temperature. In valley, winters are long and summers are short but pleasant. Average rainfall is 732 to 854 mm. The maximum temperature hardly ever goes beyond 35⁰C. In region of inner Himalayas, days are hot and there are no clouds in the sky. Winters are very cold. Temperature falls as low as minus 23⁰C. The average rainfall is 976 mm and humidity level is very low.