eChapters

7.1.    Single Action Gene
    
    7.1.1.    Osmoprotectants
    7.1.2.    Detoxifying Genes
    7.1.3.    Late Embryogenesis Abundant (LEA) Protein
    7.1.4.    Transporter Genes
    7.1.5.    Multifunctional Genes for Lipid Biosynthesis
    7.1.6.    Heat -shock Protein Genes
    
7.2.    Regulatory Gene
    
    7.2.1.    Transcription Factors
    7.2.2.    Signal Transduction Genes
    
7.3.    Choice of Promoters
    
7.4.    Physiological Evaluation of Stress Effect
    
7.5.    Conclusions
        
References

Crop residues are valuable natural resources that may be managed to maximize various input use efficiencies. These are a great source of organic materials for improving the soil structure, water holding capacity, the soil's ability to withstand pH variations, increasing the cation exchange capacity, reducing the phosphate fixation, as a storehouse for micronutrients and secondary nutrients especially in organic farming. Organic matter serves as a source of energy for soil fauna and microbes, which are the main agents controlling the decomposition and release of mineral nutrients in organic soil ecosystems. Crop leftovers are frequently burned by farmers, especially after harvest, which depletes the soil's nutrient content and microbial population and produces greenhouse gases. Each year, a sizable amount of crop residue is produced and if used efficiently, they may provide partial or full amount of the nutrient budget required under organic farming for the production of annual or perennial crops besides achieving resource conservation and environmental sustainability.

1. Introduction

Crop residues are the non-economic plant parts like straws, stubble, stover etc., that remain in the field after harvesting the economic product. Crop remains from threshing sheds such as groundnut shells, oil cakes, rice husks, corn and sorghum cobs or discarded during crop processing can also be utilized in organic farming. India produces 108.75 MT of wheat, 121.46 MT of rice seed, 30.24 MT of maize seeds, 49.66 MT of millets seeds (jowar, bajra, ragi, and small seed millets), 392.8 MT of sugarcane, 46.11 million bales of fibre crops (jute, mesta, cotton), 25.58 MT of pulses and 36.57 MT of oilseed (Agricultural statistics at a glance, 2021).

Abstract

Various studies put the percent of rural women engaged in agriculture and related activities in India around 65-70%. A majority of them are from economically and socially deprived category and qualify as “poor” or below poverty line. In rural India women play the role of agricultural labourer, fuel gatherer, food provider and home maker. Both central and state governments have framed and implemented various programmes to improve the living conditions of rural people. Measures have also been taken to provide employment and alleviate poverty. Generally these programmes fall into the category of wage employment, self-employment, housing and habitat development, and watershed development programmes. The last mentioned focuses on various water supply schemes to the rural poor and socially deprived. These programmes are evaluated in this paper. Although they are intended to benefit all the poor and jobless in rural Karnataka, the benefits reach women too because of their role as homemakers and food providers. Be it wage earned or drinking water or shelter, these programmes, if implemented sincerely, make the life of farm women less laborious and more comfortable.

While reviewing the status of education and research on medicinal plants in Bangladesh, it was found that there are 27 government and private educational institutions currently engaged in offering Bachelor or Diploma degree on Unani and Ayurvedic systems and training of traditional medicine practitioners in Bangladesh. Several other public and private universities have included different aspects of medicinal plants in their syllabus with other degrees at undergraduate and post graduate level. At present, there are 277 Unani, 201 Ayurvedic and 32 herbal drug manufacturers in Bangladesh with 6498 Unani, 4058 Ayurvedic and 537 herbal products registered by the Directorate General of Drug Administration. About 500 species of plants are identified which possess medicinal properties and are distributed throughout the country. There is no distinctive research organizations at present for conducting planned research solely on medicinal plants; though, the Bangladesh Forest Research Institute have some research programme on medicinal plants. Hamdard University- a private university is offering degree on Unani and Ayurvedic systems and conducting some research including drug manufacturing. Bangladesh Agricultural Research Institute with other public and private universities are conducting some hectic research on medicinal plants including some high yielding variety development. The Government of Bangladesh (GoB) have taken some initiatives for development of Unani and Ayurvedic medicine sector like making ‘Bangladesh Unani and Ayurvedic Practitioners Ordinance, 1983’, ‘National Drug Policy 2016’, establishment of ‘Board of Unani and Ayurvedic Systems of Medicines (BUASM)’, etc. But proper implementation of the ordnance, strengthening the activities of BUASM and taking organized research programme on medicinal plants are very much essential for having skilled professionals, quality drugs and research.

Digestive System and Digestion in Chicken

Studies on structure and functions of digestive system of chicken play important role for their nutrition and feeding. Functions of each part are given below (Fig 35):

Mouth: Birds feed through the beak. The horny upper and lower mandibles form the beak. Lips, teeth, cheek and soft palate are absent. The dagger-like tongue helps to force the feed into the esophagus. Chicken has 24 taste buds with high sense of taste. Absence of teeth makes the particle size of the feed important.

Esophagus (Gullet): It is made of loose fibrous tissue and serves as a tube to pass the food from mouth to crop. This is relatively long because of the long neck of the fowl.

Crop: (Ingluvius): It is a pouch like structure of esophagus to store, moisten and soften the food. It gives information about the feeding habits of the fowl.

Proventriculus (Glandular stomach or True stomach): It is an enlarged glandular ovoid structure of the esophagus connected to gizzard. It secretes pepsin and Hydrochloric acid.

Gizzard (Muscular stomach): Disc shaped muscular organ with two pairs of strong thick muscles and lined internally with a thick horny epithelial covering called the Koilin layer. Coarse materials are ground well by its powerful contractions with the support of the grit that birds consume.

12.1 What is Climate Change?
 
The earth receives short-wave radiation from the sun, one-third of which is absorbed by the atmosphere, ocean, ice-land and living organisms. The energy absorbed from solar radiation is balanced, in the long-term, by the outgoing radiation from the earth and atmosphere. While short-wave radiation from the sun can easily pass through the atmosphere, the long-wave radiation emitted by the warm surface of the earth is partially absorbed by trace gases in the atmosphere called greenhouse gases’ (GHGs).

1. Introduction

Processed foods have become a way of life in the modern world. Manipulation of chemical and physical properties facilitated by modern food technology and followed by addition of food additives has created a plethora of innovative food products that offer consumers greater convenience, variety, safety, satiety and quality.
Food additives have been in use for centuries for preservation, for providing improved appearance or desired texture and flavour. Preservation of foods started with salting and smoking. The Egyptians used colours and flavours, Romans used saltpeter and in India, turmeric is being used. Similarly additives such as baking powder as a raising agent, thickeners for sauces and gravies and colours- synthetic as well as from natural sources are being used.
Today more than 2500 food additives have been in use mainly due to the spurt in the research activities in food science and technology that are aimed at providing different characteristic functions to foods. Out of these, about 1300 are the flavouring additives.

We are entering an era when certain environmental conditions will exert a degree of concern which has never been before encountered by man in the course of human history.

The survival of human beings depends on the realisation that they have to live in harmony with the various elements of the environment which are interconnected.
    
(i)     An understanding of the components and processes which takes place in the environment.
    
(ii)     The relationship between different abiotic and biotic components and the assessment of resources with reference to needs of people in a region is essential for their survival.
    
(iii)     A reduction in rate of growth of population in developing countries and a reduction in consumption of resources by developed countries would lead to a balance between population and resources. In this manner, the awareness of the problems faced by environment would enable people to take appropriate decisions. This makes the earth habitable for future generations.

Agroforestry is a land use system that involves two or more plant species at least one of which must be a woody perennial. When perennial woody and herbaceous components are grown together on the same piece of land their performance would largely depend on their ability to share various growth resources in a given environmental situation. Due to difference in growth pattern and resource requirement of the components in agroforestry situation, a close interactive relation is obvious. Thus, careful management practices for the components are required to establish a successful agroforestry system. The characteristics of the trees and crops, and their interactions, can be modified with good management practices in order to take advantage of the positive characteristics and minimize the effects of the negative ones. Effective and efficient agroforestry management may be divided into two groups; tree management and agricultural crop management.

FACTORS AFFECTING THE SELECTION OF TREE SPECIES

Trees in an agroforestry system contribute significantly to the total output of the system and therefore, success of the system depends on the selection of the tree species. The following factors are to be considered to choose the best tree species for the agroforestry systems in a particular site.

1. Introduction

Nursery is a place, where seedlings and saplings of different ornamental plants (trees, shrubs, climbers, annuals, potted plants etc.) are propagated and maintained until they are out-planted in a prepared bed or in pots. Establishment of an ornamental nursery is emerging as a profitable venture, especially around cities. Rapid urbanization has led to the development of community parks and various sites for people to engage in active and passive recreation. This has led to surge in demand for quality planting material, which ensures rapid establishment and beautification of the landscape site. The following chapter deals with the basic principles and practices of establishment of ornamental plant nursery, with reference to its effective management to enhance the income and reap better profit.

14.1 Introduction

The fast growing field of nanotechnology presents great potential to influence various sectors in the areas of energy, environment, agriculture, health care and consumer goods. To overcome the demanding need of nano-based applications, various strategies to synthesize nanoparticles have been attempted. The major focus is to synthesize nanoparticles of desirable properties such as shape, size and compositions. Various strategies have been employed to synthesize nanoparticles. Foremost among these are physical and chemical methods which include sol-gel technique, solvothermal synthesis, chemical reduction, laser ablation and inert gas condensation. But altogether they suffer from process limitations like difficulty in controlling experimental conditions, feeble reproducibility, polydispersity, costly instrumentation and recovery as well as energy intensive and eco-hazardous processes. However, various factors like cost, speed, efficiency, biocompatibility etc. are still not concerned. Thus, finding a balance between scalability, price and applicability is still a true challenge. These limitations can be potentially overcome by using biological methods for nanoparticle synthesis.

1. INTRODUCTION

The key global challenges facing the mankind in the 21st century are food, water, energy security, environment, combating cancer, and infectious diseases. Solving these challenges requires concerted efforts using modern scientific and technological advances in multiple disciplines. One such technology that has revolutionized life science research is “next-generation sequencing”. The NGS technology has brought an enormous technological shift in DNA sequencing through dramatic high-throughput and a precipitously dropping cost of raw sequence data. NGS technologies changed the dynamics and pace of genomic research in humans, animals, plants and microbes largely due to their rapid, inexpensive and highly accurate sequencing capabilities. The capillary electrophoresis based sequencing technology pioneered by Sanger and Coulson.

Abstract

Medicinal herbs are economically and nutritionally important plants, which are rich in health-promoting compounds. Herbs are the backbone of both the traditional Chinese and Indian medicine, which has long history as part of their culture. Ensuring the quality of herbs is a crucial step for integrating the traditional medicine into science-based modern medicine. Drying is an essential technique in preservation of herbs as it affects directly the quality attributes of the dried products, whereas many producers lose much profit due to poor drying techniques. So, employing a suitable drying technology and selection of appropriate drying conditions are very important for producing high quality herb products. The aim of this article is to summarize the advances in drying technologies of medicinal plants, describe the current status and identify future research opportunities. The current work provides more data and information for selecting optimum technology for herb drying and would trigger innovative drying technologies to enhance drying kinetics and quality of herb drying.

Fertility is the ability of a male to impregnate the fertile female. The reduced or temporary loss of fertility is called infertility whereas permanent loss of fertility is called sterility. A male with low libido or poor sex drive may have excellent semen quality or a male with good libido may have poor seminal quality. So, libido has no direct relation with the male fertility. Male infertility can be categorized into Impotentia coeundi and Impotentia generandi. 1. Impotentia Coeundi • The condition of reduced or lack of sex drive or Inability to copulate (failure of normal service) is referred to as impotentia coeundi. • It may occur due to immaturity, poor experience to perform coitus, inability or unwillingness to mount, inability to perform intromission or failure of ejaculation. • The following conditions may reflect the immaturity or poor/bad experience of the male animal which leads to impotentia coeundi:

Introduction

For many years, it has been acknowledged that “augmentative” or “inundative” biological management can decrease arthropod pests (DeBach, 1964). The goal of increased biocontrol is to bring about behavioral and numerical changes in the natural enemies that live within agricultural environments. This tactic calls for the large production of natural enemies as well as their periodic release, to maximize their potential for reproduction during the growing season. For instance, the use of augmentative releases may be required if naturally occurring populations of parasitoids or pests are either nonexistent, do not successfully colonize fields or orchards, or colonize at a point in the season that is too late to provide effective pest control. The increase is being carried out to establish a population of natural enemies capable of keeping the number of pests at economically hazardous levels until harvesting time.

Biological Control

Controlling problems caused by things like mites, insects, weeds, and plant diseases with the help of other organisms is called biological control or biocontrol. It uses natural mechanisms like predation, parasitism, herbivory, and so on, but human intervention is almost always present.

Parasitoids

The term “parasitoid” refers to a group of insects, the larvae of which develop on or within the bodies of other insects, which the parasitoid kills eventually. The phenomenon is known as parasitism. The vast majority of parasitoids are classified as either wasps (Hymenoptera) or flies (Diptera). These insects are numerically quite abundant and play a significant role in almost every terrestrial environment.

The review of literature consists of conceptual literature concerning the concepts and theories and empirical literature consisting of studies made earlier which are relevant to one proposal.
The main purpose of this chapter is to present some of the findings/ results of the past research studies related to the present investigation. A few relevant research studies which have been conducted in India and abroad in the field different altitude areas, their livelihood are presented in the following headings:
1.1. Works based on the livelihood of different altitude places of India and abroad
1.2. Works based on the livelihood of different altitude places specially North East India.
1.3. Other general concepts related with the present research
1.1 Works Based on The Livelihood of Different Altitude Places of India and Abroad
FAO, Rome (2011) stated a major factor limiting the food security of household in hill areas is shortage of land for cultivation which are simply too small to support the farmers with current food production practices. Closing the yield gap will produce food production and security.
Alkan S. and Toksoy D. (2008) indicates that the forest villages which are at the high altitude and on the field that are not suitable for agriculture. This complicates living in them and increases their dependence to the forest resources. While determining the forest villages, the distance from the forest, and the socio-economic criterions are considered.
Tejada E. and Nielsen M.O. (2008) stated that the harsh eco-climatic and edaphological conditions of the High Altitude of Bolivia adversely impact most of the agricultural and livestock production indices. However, livestock activity, in addition to dealing with the subsistence of rural families, offers more security than the agricultural activity in those eco-systems, since crops are more vulnerable than animals to abrupt climatic changes.

Abstract

Food proteins are among the commonly used ingredients by food manufacturers to produce different products with desired characteristics. Due to several nutritional and functional properties, proteins have different functions in various food products in addition to their role in metabolic system of the human body. Dilute or concentrated solutions of pure proteins or unprocessed food products which are rich in protein are very sensitive to deterioration or degradation by microorganisms and thus have short shelf life at ambient temperatures due to their highly moist structure and high protein content. Drying is one of the best methods that can guarantee preservation, a longer shelf life, chemical or thermal stabilization and resistance against other stresses. A full understanding of stresses encountered during drying is needed to choose an appropriate drying process and to optimize this process for maximum product quality. A number of methods have been used by various researchers to dry protein-containing foods. Among these methods, freeze drying and spray drying are the most common techniques. Sun drying, convective hot air drying, vacuum drying, heat pump drying, radio frequency drying as well as combined or hybrid drying methods with two or more of the drying methods have also been developed.

Principles of Incubation

Incubation is a process by which the embryo within egg develops into a fully formed chick capable of breaking free from the shell. Basically, when a hen incubates an egg, it means she is on the egg in order to keep it warm for a certain period of time, 21 days for chicken, until the chick embryo has fully formed and is ready to hatch. The incubation period in other species is given in Table 41. The following factors affect the incubation on egg

1. Temperature

Incubator temperature should be maintained between 99 and 100 oF. The acceptable range is 97 to 102 ^oF. Overheating is more critical than under heating. An incubator should be operated in a location free from drafts and direct sunlight. Temperature is probably the most important single factor influencing the development of the embryo. A higher temperature will advance the hatch and a lower temperature will delay hatch. Younger embryos are especially susceptible to high temperatures because the upper lethal limit is very close to the optimum incubating temperature. High temperature will cause the embryonic membranes to dry out too soon. Chicks that hatch may have an unsteady gait.

Potassium is the third important essential nutrient element after nitrogen (N) and phosphorus (P) required by all living organisms, including plants and animals. Potassium is essential for many metabolic activities like carbohydrate metabolism, nitrogen metabolism. It is required for the activation of over 60 enzymes in plants. It controls/regulates the activities of various essential nutrients. It is vital to photosynthesis, and synthesis of carbohydrates, starch and proteins in plants. It plays vital role in controlling the opening and closing of stomata in photosynthesis. It also helps in controlling water use by plants by regulating the osmotic pressure of guard cells during transpiration. It plays a major role in transport of water and nutrients throughout the plant in xylem. Potassium improves crop yield and quality of flowers, fruits, vegetables and other field crops in terms of size, shape, colour, taste, shelf-life, and fibre quality. Potassium stimulates the growth of strong stems and provides strength to the plant against some disease by promoting thickness of the outer cell walls. It is required for translocation of assimilates. Under reduced K supply, translocation of NO₃^-, PO₄^3-, Ca²⁺, Mg²⁺ and amino acids is hampered. It also imparts resistance against environmental stresses such as drought, cold and frost. Adequate K can reduce moisture loss from growing plants, thereby giving some drought resistance. It reduces lodging of crops and enhances their winter-hardiness.

It is taken up by the plants as K⁺. Being a basic element, it takes part in neutralization of the acidity in plants caused by several organic acids produced. It does not form organic compounds in the plant system. It is the most mobile element in the plant. Thus, it can move through all the plant system due to osmotic pressure. When any plant sample is dipped into water, some K comes out. This shows that it is highly mobile.

Potassium is also required for animal nutrition and human beings. Potassium is essential for many metabolic functions. It maintains salt balance between cells and body fluids. Adequate K is essential for nerve function and preventing muscle cramps. It is routinely added to many animal feeds. Since K⁺ is not stored in the human body, dietary replacement is required on a regular basis. Government agencies state that diets containing foods that are good sources of K and low in Na may reduce the risk of high blood pressure and stroke.

Introduction

Both beneficiary and deleterious microorganisms are present in food. Beneficiary microbes are used for the preparation of a number of dairy and meat products and are called Probiotics, whereas deleterious microbes can cause food poisoning. The quantitative analysis of food products is necessary to find out the presence of types of microorganisms.

Requirements

1. Food sample
2. Mechanical blender
3. Sterilised distilled water
4. Steilised distilled water blanks (9 ml)
5. Petri plates
6. Sterile Pipettes (1 ml)
7. Eiosin Methylene Blue agar medium
8. Incubator
9. Colony counter
10. Marker

Procedure

1. Weigh 1 g of well blended