eChapters

Introduction

The natural hazards like floods, cyclones, droughts, landslides and earthquakes are not rare or unusual phenomenon. India is among the world’s most disaster prone areas and a large part of the country is exposed to such natural hazards, which often turn into disasters causing significant disruption of socio-economic life of communities leading to loss of life and property. It would not be considered as a disaster unless it resulted in actual damage to human life or property. According to data accumulated over past 25 years, natural disasters in Asia accounts for about 40% of the world’s total disasters while the death toll ratio is about 50% and the number of people affected is about 90%. The latter figure is about 2.2 times the ratio of number of occurrences in Asia. The figures vary widely over the decades, a result that can be attributed to a few particularly terrible disasters. Such as the 1976 Tangshan Earthquake in China, which killed about 250,000, and a series of severe cyclones that hit Bangladesh in 1970 with a death toll of about 500,000. The death toll resulting from wind and flood disasters jumped by an order of magnitude in the 1990s. But this sudden increase affected Asia’s ratio to the world total by about 15 percentage points because there was a worldwide surge in this type of disaster. Clearly, there is an extreme concentration of victims of such disasters in Asia, Another substantial increase is clear in the value of damage caused by typhoons and cyclones; it is now running at 10 times the level of the 1980s. Again, however, the ratio has remained almost unchanged, at about 40%, because hurricanes in Central and North America account for more than 50% of the world total (51.2%, 58.5%, and 54.4% in the 1970s, 1980s, and 1990s,respectively). It is sadly worth noting that there has been conspicuous growth in the absolute value of damage in both Asia and the Americas.

Introduction

The Rispana river is a order of stream forming a tributary of Ganga. Its watershed covers an area of approximately 53.6 Km in the northern part of Dehradun city lies between 78^º30’ to 78^º15⁰’ longitude and 30^º15’ to 30^º 30’ latitude in top sheet No is 1/3. The area is covered in IRS - IC Pan of 13 Jan 1998 and LISS-III of 7 March 1997.

The Doon Valley is enriched with numerous seasonal and perennial streams. Which forms the lifetime or the inhabitants . The Rispana river is the part of the Ganga system of Drainage of the valley. The river originates from the Mussoorie hills, which are full of natural springs. The droplets from the springs collect and form numerous streamlets and these streamlets are joined to be these and they form the famous Shekhar Falls (north of Shahanshai Ashram about 5 Km away). Then the Rispana flows along Rajpur road over the Doon Gravels and then river passes through the tiny hamlets Nalapani, Raipur, Chanderroad, Defence colony, Amwala, Tapowan, Dandadhoran Adohiwala, Dalanwala, Gujram, Ajabpur and finally its contribute the water to the suswa River which intern joins the Ganga.

Plant physiological processes determine growth, development, productivity and adaptation to changing environmental conditions. This chapter examines how artificial intelligence can improve understanding of plant physiology and stress responses. It considers physiological processes including photosynthesis, transpiration, nutrient dynamics and hormonal regulation and explores how AI can analyze complex biological, environmental and phenotypic datasets. Machine learning, deep learning, computer vision and predictive analytics support interpretation of information obtained through sensors, imaging, remote sensing and omics technologies. The chapter emphasizes early detection and prediction of stresses such as drought, salinity, temperature extremes, nutrient imbalance and pathogen pressure. It also discusses explainable AI, digital twins and federated learning as emerging approaches for plant stress research.

An orchard is the place where different kinds of fruit crops are grown in large scale. An orchard is a long-term investment and needs lot of planning and expertise. The orchard crops are generally trees, which ultimately have a large spread, so when they are planted, the distance between plants and rows is kept keeping in mind the final spread of the tree. So, before the trees attain their full growth, some suitable crops which are of short duration, like vegetables, flowers, spices and herbs are grown as intercrops.

Fruit trees are perennial, may be tropical, sub tropical and temperate types and thus require proper environmental conditions and suitable management practices for their successful growth.

Food processing techniques range from traditional household practices to sophisticated industrial operations designed to improve safety, quality, nutritional value and shelf life. This chapter presents traditional methods such as blanching, fermentation, soaking, germination and malting, highlighting their effects on nutrient bioavailability and food characteristics. It then introduces industrial processing and distinguishes between thermal and non-thermal technologies. Thermal methods such as pasteurization and dehydration are discussed alongside innovative approaches including pulsed electric fields, high-pressure processing and irradiation. The chapter emphasizes the principles, applications, benefits and limitations of these techniques and demonstrates how processing conditions influence microbial safety, nutritional quality and sensory attributes.

14.1 Introduction

Indoor air pollution causes significant health problems for the two billion people worldwide who rely on biomass fuels for their cooking and heating needs. Over the last 30 years awareness of the environmental and social costs of using traditional fuels and stoves has grown. At the same time, studies of the problem have resulted in proven strategies to reduce both fuel use and harmful emissions. Unfortunately, the local stoves currently available do not always represent the best designs that modern engineering can offer. Although open fires are often used wastefully, carefully operated open fires can be fuel efficient and clean burning when tested in the lab. In many situations, cooks are not overly concerned with fuel use, and studies have shown that when fuel is plentiful three-stone fires can use an excessive amount of wood to cook a small amount of food. But in other places where fuel is scarce, open fires can be carefully controlled so that fuel efficiency rivals many first generation improved cook stoves.

Modern cook stoves are designed to clean up combustion first. Then the hot gases can be forced to contact the pot and increasing efficiency without increasing harmful emissions. Fires can be clean burning when expert cooks push the sticks of wood into the fire as they burn, metering the fuel. The open fire can be a hot fire useful when food or drink needs to be prepared quickly. The energy goes into the pot, not into the cold body of a stove. The open fire can burn wood without making a lot of smoke; hot fires burn smoke as it is released from the wood (Fig.14.1). Unfortunately however, many fires used for cooking are built emphasizing simplicity of use and are wasteful and polluting. Modern stoves score higher when tested than even the most carefully operated fire in the laboratory.

Introduction

Man’s intervention in the evolution of plants, to adapt them to suit his needs, constitutes the practice of plant breeding. Historically regarded as an art and still too empirical to be accepted universally as a science, it has recently been described as a technology (Riley 1978). Whether art, science or technology, it certainly draws on a wide range of disciplines and embodies all those principles of organisation and management that determine success in any production-oriented programme.

Perhaps the biggest contribution that the plant breeder has made to increased production during the past 50 years has been in helping to alleviate the effects of natural hazards such as lodging, pests and diseases on crop production. While most of this progress has been through the manipulation of biotic stresses, much is still to be achieved under non-biotic stresses such as drought, salinity, temperature, etc. This argument is strengthened by the fact that in spite of the spectacular achievements made possible by the ‘Green Revolution’, the productivity level of most crop plants, including wheat and rice, has remained both low and static under stress conditions. Concerted efforts are needed through an approach of interdisciplinary research, since not much has been done to define criteria for stress assessment and evolving breeding approaches for incorporating stress tolerance in crop plants.

A forest is a large area dominated by trees. Many definitions of forest are used throughout the world, incorporating factors such as tree density, tree height, land use, legal standing and ecological function. Although a forest is usually defined by the presence of trees, under many definitions an area completely lacking trees may still be considered a forest if it grew trees in the past, will grow trees in the future, or was legally designated as a forest regardless of vegetation type. According to the Food and Agriculture Organization, forests covered 4 billion hectares or approximately 30% of the world’s land area in 2006. Forests are the dominant terrestrial ecosystem of earth, and are distributed around the globe. Forests account for 75% of the gross primary production of the earth’s biosphere, and contain 80% of the earth’s plant biomass.

DEVELOPMENT OF MODERN FORESTRY

Systematic management of forests for a sustainable yield of timber began in Portugal in the 13th century when Afonso III, the king of Portugal planted the trees to prevent coastal erosion and soil degradation, and as a sustainable source for timber used in naval construction. His successor Dom Dinis continued the practice and the forest exists still today. Forest management also started in German in the 14th century and in Japan in the 16th century. The practice of establishing tree plantations in the British Isles was promoted by John Evelyn during second half of the 17th century.

During the late 19th and early 20th centuries, forest preservation programmes were established in British India, the United States, and Europe. Sir Dietrich Brandis is considered the father of tropical forestry. He brought European concepts and practices to the tropical and semi arid climate zones. The enactment and evolution of forest laws and binding regulations occurred in most Western nations in the 20th century in response to growing conservation concerns. Tropical forestry is a separate branch of forestry which deals mainly with equatorial forests that yield woods such as teak and mahogany. One of the applications of modern forestry is reforestation, in which trees are planted and tended in a given area.

Global onion research connects crop domestication, genetic diversity, nutrition, therapeutics, production, breeding and post-harvest technology. Onion contains organosulphur compounds, quercetin derivatives and other phytochemicals associated with antimicrobial, antioxidant, cardioprotective and anticancer effects. Despite high global production, productivity differs substantially among countries, and storage losses remain a major economic concern. This chapter reviews global production trends, germplasm resources, breeding strategies, phytochemistry, therapeutic potential and emerging storage technologies. Landraces, cultivars and wild relatives provide valuable traits for yield, storability and stress resilience. Advanced treatments such as ozonation, cold plasma and irradiation demonstrate promise, although wider commercial adoption, economic validation and regulatory development remain necessary.

Edaphology is the study of soil properties in relation to plant higher production.

Pedology refers to study of origin of soils in their natural environment, classification and description.

pH is the negative logarithm of the concentration of H+ ions in soil solution.

Soil profile is a vertical exposure of horizon sequence.

Soil texture is not changed by cultural management.

Cation exchange capacity (CEC) is defined as sum total of exchangeable cations that a soil can absorb.

5.1 INTRODUCTION

The importance of the best quality planting material as an initial investment is a well-realized factor for persons engaged in horticulture field. So, nurseries have great demand for the production of plants, bulbs, rhizomes, suckers and grafts. But in general, good quality and assured planting material at reasonable price is not available many a times. Nursery is the basic need of horticulture. Plant propagation techniques and practices is the core of horticulture nurseries. The planting materials for horticultural plantations are raised from seeds and vegetative parts. The difficulty of procuring tree seeds and their rising cost makes it necessary to find means to increase seedling survival and growth.

Raising a nursery needs a great skill. Nursery business has become an agro- business for the unemployed youths. Generally, various commercial crop growers require a good quality saplings or grafts of genuine type. So, nursery raising is quite a remunerative enterprise.

Nursery is a special place where seeds are sown, plants are propagated, grown, nurtured to usable size for planting or for sale. Nurseries provide the necessary control of moisture, light, soil and predators and allow production of healthy and hardy seedlings.

Silviculture is the branch of forestry dealing with the establishment, development, care and reproduction of trees. Forestry is anything done in the forest and silviculture is anything done to forests. ‘Silva’ is the Latin word for forest and ‘culture’ for cultivation. Silviculture is narrower than forestry, being concerned only with forest plants, but is often used synonymously with forestry.

The Society of American Foresters defines silviculture as theory and practice of establishment, composition, constitution and growth of forests. Thus, silviculture refers to art and science of raising forest crops, methods of raising tree crops, their growth and aftercare up to the time of final harvesting. In simple words, silviculture is the growing and tending stands of trees. Silviculture is also used to manage forests for wildlife, water, recreation, aesthetics, or any combination of these or other forest uses.

The drones are configured to traverse the field and acquire photos and sensor data in alignment with the predetermined flight plan. High-resolution cameras get visual data, whereas multispectral sensors gather information on light wavelengths beyond the visible spectrum, thereby offering insights into plant health and stress levels.
During drone flights, essential techniques for data acquisition encompass photogrammetry utilizing overlapping high-resolution images, GPS tracking for accurate location data, IMU (Inertial Measurement Unit) sensors for monitoring attitude and movement, ground control points (GCPs) for precise georeferencing, multispectral or hyperspectral imaging for comprehensive spectral analysis, LiDAR scanning for the generation of 3D point clouds, and data logging systems to document sensor readings throughout the flight, all while meticulously planning flight paths and accounting for variables such as lighting and weather conditions.
Drones have emerged as a vital competitive advantage in the inspection of various asset types, optimizing time, reducing costs, and mitigating risk. Historically, an inspection necessitated an inspector to ascend the structure, capturing images and doing measurements manually from considerable heights.
This procedure is intricate; it necessitates extended hours and the presence of numerous experts on site for safety. The data generated by inspectors through manual pictures and measurements is limited: manual inspections may necessitate many trips to collect adequate information for necessary maintenance.
Manually operating a drone to obtain the data necessitates training, expertise, and extensive experience. A pilot collecting data for a tower inspection must comprehend the requirements of the inspectors. The pilot must comprehend how to maneuver an aircraft accurately around an asset to obtain precise aerial photos, regardless of barriers, wind conditions, or the necessity to replace batteries during the trip. The data must be examined and converted into a digital format that is

Introduction

In the 1997 WHO guidance document: “WHO/VSQ/97.01: (A WHO guide to good manufacturing practice (GMP) requirements. Part 1: Standard operating procedures and master formulae)” some basic explanations and instructions were given for preparing various documents required by Good Manufacturing Practice guidelines from WHO and from several regulatory authorities.

GMP guidelines include the requirements for documents (individual), documentation (the systems and formats for documents), and documenting (recording) of production and control activities. Most GMP guidelines provide the same or very similar information as the principles of Good Manufacturing Practice are now international in scope.

In this guidance document, the requirement for master manufacturing instructions and the requirements as given in different GMP documents, different names for these documents and various forms that they can take will be described. This is to guide vaccine manufacturers who are applying for pre-qualification or re-qualification of their product(s) in the preparation or improvement of current documents for manufacturing operations.

1.1 The relation between man and the earth’s resources

The balance between the demand which a community of plants or animals makes on its environment and the ability to satisfy those demands is not the static equilibrium of a laboratory balance with equal weights on either side. It is more like the unstable balancing of a circus acrobat - a series of swings and overcorrections, resulting in an oscillation on either side of the true balance point. Thus a species of wild life increases in number according to the availability of its food supplies, but then goes beyond the optimum number. The natural correcting factors of starvation or migration reduce the population, but there is an overcorrection, and soon the cycle starts again with increasing numbers.

1.1.1 The Malthusian Thesis

In primitive societies the human population also oscillates about a mean as the limiting factors of starvation, disease, and war, maintain an uneasy balance against the natural tendency to increase. A serious imbalance arises when man learns how to modify the limiting factors, but allows the natural increase to go unchecked. The essence of the Malthusian Thesis is that the resulting instability is the inevitable order for mankind. The thesis is named after the English political economist Thomas Malthus who first gave it formal expression in MALTHUS (1966). In an age when significant improvements in health, hygiene, and the standard of living were just becoming possible, Malthus aroused great argument when he pointed out that these very improvements could lead to mi sery through overpopulation. The key point of Malthus’s argument is that population increases in what he called geometric ratio, what today we would call an exponential curve, because whenever there is an increase in population there are more people to produce the next generation, so the rate of population growth accelerates - in modelling terms a positive feedback loop. On the other hand, when we increase food production there is no feed-back loop, the best we can hope for is for a constant linear increase. The natural sequence is therefore for food demand to increase faster than food supply, leading at some point to food shortage.

ABSTRACT

An understanding of the metabolism of heavy metals facilitates biotechnological use of these functions just recently, although heavy metals comprise the major part of the elements in the periodic table. Due to their ability to form complex compounds, some heavy metals are essential trace elements. In any case, essential or not, most heavy metals are toxic at higher concentration. Heavy metal pollution from last few decades has led to an increased environmental concern. Heavy metal like cadmium is a non-essential toxic heavy metal and is also being increased in soil during last few years posing a serious threat to environment and human health worldwide. Therefore, remediation strategies of the contaminated sites are great concerns and can be achieved by a number of different physico-chemical and biological means.

1. Introduction

Spices are a high-value, low-volume commodity traded around the world. Spices have played a significant part in civilisation, exploration, and commerce throughout history. Since ancient times, India has been known as the spice capital of the world, with over a hundred different types of spices grown. India has long been a traditional producer, consumer, and exporter of spices, with nearly every state producing one or more of them. India has a total area under spice production of 39,27,430 ha, which produced 95,99,900 MT in 2017-18. (Spices Board, 2020a). Due to their rich aroma, texture, and flavour, Indian spices are in high demand around the world.

5.1 Introduction

The source of pollution are many and varied. The most critical are domestic sewage and industrial effluent discharging into rivers, lakes, ponds etc. Treatment facilities for domestic sewage in class 1 cities having population of more than 1,00,0000 and class 2 cities having population between 50,000 and 99,999 can process hardly 10% of the wastewater generated. Wastewater treatment facilities are difficult to quantify due to lack of continuous data. On an average, the treatment capacity in class 1 cities can handle only 60% of the wastewater collected and less than 15% of the total volume of wastewater generated.

The Indian industry has grown annually at an average rate of 5.5% during the last 50 years. Among different industrial sectors, water pollution is concentrated with in a few industrial sub-sectors mainly in the form of toxic wastes and organic pollutants. Out of the total pollution contributed by the industrial sub-sectors, 40% to 45% of the total pollutants can be traced to the processing of industrial chemicals and nearly 40% of the total organic pollution to the food products industry alone. Food products and agro-based industries together contribute 65% to 70% of the total industrial wastewater in terms of organic load. Blair T Bower, consultant, the Urban Institute, USA, remarks: "… If substantial further growth of Asia’s cities cannot be avoided and if the environmental disasters that could be associated with that growth are to be prevented, there is only one alternative: urban environmental quality management must be substantially improved throughout the region".

The total quantity of water used by the domestic and industrial sectors is much less than that consumed for irrigation. However, the wastewater released from the above sectors has a great concentration of pollutants, and is discharged at specific disposal points. Thus, the wastewater generated from domestic and industrial projects causes much more water pollution as compared to any other source.

39.1 Introduction

Like all other animals, fish are also subjected to certain diseases. This is one of the most important problems confronting a fish culturist. Diseases at times may take the form of epidemics. The occurrence and magnitude of infections and diseases are closely related to the sanitary conditions prevalent in the water and also the general health of the fish.

14.1 Changes in policy and strategy

14.1.1 Policy changes

In the discussion on land use planning we suggested that the ideal pattern of development is to establish a long-term national or regional policy, which leads to medium-term strategies, and short-term tactical operations. In the real world a curious situation is arising in that the adoption of the new land husbandry approach is growing so fast that the practitioners have moved ahead of the politicians and opinion formers, with the result that the implementation of strategies by Non-Government Organisations, aid agencies, and senior field officers, is helping to shape new policies.

There is always the problem that national policies ought to be long term, but are created by politicians usually working within a short time frame to the next election. Fortunately, the land husbandry approach allows planners at all levels from farmers to governments to appreciate the long-term issues.

The new approach was mentioned in section 9.2.1 in connection with land use planning. It is summed up in the slogan From soil conservation to land husbandry, and two reviews using that title list the main points as the need for: