eChapters

The classification of living organisms has passed through several changes and has reached the present stage with the gradual assimilation of more and more knowledge about them. The classification is mainly based on the anatomy, life style, habits, habitats, metamorphosis and such other characteristics. Though the concept of classification of living organisms was perhaps started by Aristotle between 384 - 322 BC, it was the Swedish scientist Carl Linnaeus (1758) who presented the classification, which was acceptable to most of the Taxonomists. He propounded the binomial nomenclature of naming each and every organism of animal and plant origin with a generic and species name. In his classification, he was consistent in using Latin names for all the organisms. He was the originator of a regular system of classification in which he recognized larger and smaller categories, the larger ones comprising of a varying number of smaller ones. Because of his contribution in the field of Taxonomy, he is rightly called the ‘Father of nomenclature’. A.D.Imms later modified the system to some extent in 1961. However, Brauer (1885) laid the foundation of the modern system of classification of insects. He was the first one to emphasize the fundamental division into primitive wingless insects, the ‘Apterygota’ and the winged or secondarily wingless insects, the ‘Pterygota’. The latest code on classification and nomenclature was approved and published by the ‘International Trust for Zoological Nomenclature’, London in 1964.

4.1 Introduction

Precipitation is a major component of hydrological cycle. It occurs because of condensation of water vapour molecules in the atmosphere. When the precipitation falls on the grounds, it undergoes several phases before it appears as runoff in the streams. Certain amount of precipitations is intercepted by the foliage of plants and roofs and other parts of the building and other hydraulic structures. This intercepted water is called as interception loss which is evaporated to the atmosphere. Sometimes the dried surface of the buildings and other structures soak certain amount of precipitation while falling on them which also adds to interception loss. After striking the land masses, certain amount of the precipitated water gets infiltrated into the soil surface which then moves both in lateral as well as in vertical direction. This loss is called as infiltration loss. For the study of groundwater, infiltration loss is not a loss but rather it is a gain in terms of groundwater recharge. However for a surface water hydrologist, it is a loss since it decreases the amount of runoff contributing to the stream or any other water bodies.

4.1 Mustard

The principle oil yielding rape seed and mustard sp. cultivated in India are

4.1.1 Land Requirement

Select seed field on which the Brassica sp. was not grown in the previous season unless the crop in the previous season was of the same variety and was grown from certified seed. To avoid disease control it is necessary to fallow a 3-4 year crop rotation so that a given field is selected one in every 3-4 years. In addition select field should be well drained, leveled and suitable for Brassica cultivation.

SYNOPSIS

Vegetables are essential for well-balanced diet since they supply phytonutriceuticals. About 3 billion people in the world are malnourished due to imbalanced diets. Regular consumption of a vegetable rich diet has undeniable effects on health since they have been strongly associated with improvement of gastrointestinal health, good vision, and reduced risk of heart disease, stroke, chronic diseases such as diabetes, and some forms of cancer.

9.1 Introduction

In order to increase the production and productivity of crops, provision of irrigation system is highly essential. A project that makes use of weir or a barrage for providing irrigation to fields is called as direct irrigation system. On the other hand, a storage irrigation system makes use of storage reservoir by construction of dams. In order to provide irrigation by both the schemes, it is necessary to have a network of canal systems. A canal is an artificial channel, generally trapezoidal in shape constructed on the ground to carry water to the fields. The canal systems that provide water to the fields include main canals, branch canals, distributaries, minors and watercourses. It is imperative to design the canal systems properly for a certain realistic value of peak discharge that must pass through them so as to provide sufficient irrigation to the command areas. The flow irrigation that provides irrigation water to the fields may be of two types i.e. Inundation irrigation and Perennial irrigation.

1.1 Introduction

In India Agriculture was practiced formerly on a subsistence level, the villages were self sufficient people exchanged their goods and services within the village on a barter basis. With the development of means of transport and storage facilities, agriculture has become commercial in character; the farmer grows those crops that fetch a better price. Marketing of agri produce is considered as an integral part of agriculture, since an agriculturist is encouraged to make more investment to increase production. Thus there is an increasing awareness that it is not enough to produce a crop but it must be marketed. It involves buying and selling of agri-produce. In olden days the farmer sold his produce directly to the consumer on cash or barter basis. Presently it has undergone a series of transfers/exchanges from one hand to another before it reaches consumers. National Commision on Agriculture terms agricultural marketing as a process which starts with a decision to produce a saleable farm commodity and involves all aspects of market structure of system, both functional and institutional based on technoeconomic considerations that include pre & postharvest operations, assembling,grading,storage,transportation and distribution but as per ICAR it is the assembling,processing & distribution. Inadequacies of present Indian agrimarketing system being improper warehouses,lack of grading,standardization,inadequate transport facilities,presence of large number of middlemen,unregulated markets, inadequate market information and credit facilities etc. Characteristics of agri-products being seasonal and perishable has to be colleted from various places ,stored & marketed with proper price. Existing agri-marketing system in India refers to sale through money lenders, hats,mandies(wholesalers) or co-operative marketing. Improvement of Agri-market system refers to regulated markets,constructing warehouses, provision for grading,standardization of produce (seal of AGMARK) and Weights & measures, daily broadcast of market price and transport facilities, market surveys etc.

Introduction

Fermentation is an alluring procedure of biochemical adjustment of essential nourishment microorganisms and their enzymes accomplish by lattice. Fermentation is a utilized to upgrade bio-accessibility and bioavailability of supplements from various crops and improves organoleptic properties (e.g., appearance, generation of sour taste and new aroma compounds, and textural changes such as consistency or viscosity) just as increase the shelf life of realistic usability. It makes foodstuff safe not just hindering the growth of pathogenic microorganisms because of antimicrobial growth of lactic acid and it also detoxifies aflatoxin. With these advantages, fermentation is a successful method to reduce the risk of mineral deficiency among population, particularly in developing nations where unrefined cereal or pulses are profoundly consumed. Tragically, it is additionally connected with multiplication of microorganisms, for ex., yeast and molds caused food safety concerns, (Omemu et al; 2011), decrease in provitamin A and antioxidant (Ortiz et al; 2017), carotenoids, just as loss of nutrients and minerals (Hotz & Gibson, 2007).

Fermentation is a minimum cost-efficient procedure for production and preservation of nutrient, therefore fermented food is an important piece of the eating regimen in numerous of the world. In the nineteenth century the scientific study of microbiology began, and just because, the scientific procedure of fermentation was comprehended. several classifications have been utilized to sort the assorted exhibit of the fermented nourishment produced dependent on various microorganisms, and food types, and kinds of fermentation included.

The microorganisms associated with fermentation process fall into three classes: bacteria, yeast, and molds. Yeasts are the principal microorganisms for the fermentation of breads, whereas molds is mainly used in processing of cheese and legumes. Bacteria is included only of the fermentation of cereal product. cereal and tuber fermentation are a lactic and acetic acid producing bacteria. yeast is a piece of mix microbial fermentation by bacteria in weaning food; all the more frequently, be that as it may, alcoholic fermentation of yeast may not totally alluring. Four genera of lactic acid producing bacteria are recognized as overwhelming cereal fermentation to be specific, Lactobacillus, Leuconostoc, Pediococcus, and Lactococcus spp. all of which require carbohydrate for the energy. Lactic acid and other natural acids produced from hexoses bring down the pH from about 6.5 to about 3.6. In the event that the pH is beneath 4.0, fermented product retard the growth of pathogens and along these lines ensure fermented items.

A. Bhattacharya    
    
4.1.    Factors of Abiotic Stress
    
4.2.    Light
    
4.3.    Temperature
    
    4.3.1.    Heat-stress Threshold
    4.3.2.    Low Temperature Stress
    4.3.3.    Plant Responses to Heat Stress
    
4.4.    Water
    
    4.4.1.    Drought
    4.4.2.    Flooding
    
4.5.    Soil
    
    4.5.1.    Soil Type
    4.5.2.    Soil pH
    4.5.3.    Soil Fertility
    4.5.4.    Soil Salinity
    
4.6.    Growth and Development
    
    4.6.1.    Phases of Development Sensitive to Temperature or Photoperiod
    
4.7.    Phenology
    
    4.7.1.    Changes in Phenology of Cropping Systems
    4.7.2.    Effect of CO2 on Flowering
    4.7.3.    Temperature and Effects on Phenology
    4.7.4.    Effect of Salinity
    
4.8.    Molecular/Genetic Aspects of Flowering Response to Climate Change
    
4.9.    Simulation of Phenology for Future Climate
        
    References

Economics

The term “Economics” is derived from the Greek words ‘OIKOS’ and ‘NOMAS’ or ‘NEMEIN’. ‘Oikos’ means house hold and ‘Nomas’ or ‘Nemein’ means management. So in its original sense economics means house hold management; i.e. satisfying as many wants of the house hold or family as possible by allocating the limited resources at the disposal of the family wisely among different wants. In the modern and practical sense Economics means management of day to day problems arising from unlimited wants and limited resources by wisely allocating limited resources to satisfy maximum wants. In other words economics is the study of how man manages his limited resources as it satisfies as many wants as possible.

Shrubs are the most diverse groups of ornamentals grown in tropical gardens. In habit they are hardy perennials having low spreading woody branches. They vary widely in stature and include dwarf bushes to those attaining the stature of small trees.

IMPORTANCE AND USES OF SHRUBS

Shrubs are quick growing and many of them flower continuously in the humid tropics. Their variability in flower colours and foliage characteristics and their easiness in propagation by vegetative means make them garden favourites. The various uses to which shrubs are put to in gardens are detailed below: -

In A Shrubbery : Grouping of shrubs in a shrubbery is done to display the attractiveness of their flowers and foliage. In temperate situations shrubs grown in shrubberies include Rhododendron, Peony, Fuchsia, Buddleia, and Camellia while in the tropics and subtropics, the range of shrubs available for planting are very wide.

As Focal Point Plants : Shrubs that are ever flowering like Hamelia and Hibiscus or those that have spectacular flowers such as Mussaenda, Neerium and Ixora are grown as focal point plants in small gardens. They are also grouped for mass effect in large gardens.

H erbs include non-woody or succulent-stemmed plants that are relatively shorter in stature when compared to shrubs. Based on their ornamental nature they can be broadly grouped as Flowering Herbs and Foliage Herbs. Flowering Herbs can be further classified based on their duration into Annual Flowering Herbs and Perennial Flowering Herbs. Foliage herbs of a perennial nature are further differentiated into monocotyledonous and dicotyledonous foliage herbs.

ANNUAL FLOWERING HERBS

Annual herbs are grown in gardens for their spectacular beauty when they are in flower. They are seasonal in habit and have duration of up to four months. Most of them have a short vegetative phase, which is followed by continuous flowering for several weeks. They are used in gardens for obtaining various colour effects. Varieties of annuals having analogous or similar flower colours can be grouped in flowerbeds and flower borders for monochromatic effects. For contrasting colour effects, varieties having complementary or contrasting colours like violet and yellow or blue and orange as well as green and red can be used. For colour blending effects, flowers having different shades of the same colour can be grown.

Future areas of emphasis for research and scholarship in nematode ecology are indicated by pressing agricultural and environmental issues, by new directions in applied nematology, and by current technological advances. Studies in nematode ecology must extend beyond observation, counting, and simple statistical analysis. Experimentation and the testing of hypotheses are needed for understanding the biological mechanisms of ecological systems. Opportunities for fruitful experimentation in nematode ecology are emerging at the ecosystem, community, population, and individual levels. Nematode ecologists will best promote their field of study by closely monitoring and participating in the advances, initiatives, developments, and directions in the larger f ield of ecology. Some major concepts in ecology have been explored including the dynamics of species interaction, the relationship between complexity and stability in ecosystems and the characterization of organisms as “r” or “K” selected (Howard Ferris, 1993). There has been some application of concepts of plant-herbivore coevolution and density-dependent regulation of populations.

The purpose of a sub-surface drainage system is to lower the ground water table and removal of salts beyond the crop root zone. The ground water table may rise due to commonly practiced flood irrigation method, seepage from unlined channels, percolation of rain and runoff water and sub-surface flow from higher areas. Sub-surface drainage consists of drains laid at a specified depth, spacing and grade below the ground surface. The size, spacing and depth of drains depend largely on the soil-water properties viz. , infiltration, saturated hydraulic conductivity, drainable porosity; and the requirement of removal of water through drains in certain time period fixed on the basis of rainfall and crop cultivated. The drains are usually placed in a pervious stratum. Suitable filter of coarse sand and gravel may be used when it is placed in a low permeable stratum. Sub-surface drainage serves the important job of removal of concentrated salt solution from the crop root zone particularly in arid and semi-arid region.

Vegetables being good source of carbohydrates, proteins, minerals, vitamins and dietary fibers constitute important component of human diet. These are the cheapest source of natural protective food and increase the palatability. India is the second largest producer of vegetables next to China. Diseases are inherent component of agro-ecosystem, which must be dealt with continuous and knowledgeable basis. Diseases in the standing crop from the seedling stage until harvest and spoilage caused by microorganisms during transit, storage and marketing are major constraints in increasing production and availability of vegetables. At different stages of vegetable production, disease management requires several approaches, and it is more successful, if it is integrated into crop production system. Since vegetables are mostly grown year after year in the same fields especially near towns and cities, therefore, concerted efforts are required to manage the diseases. More than 300 diseases have been reported to occur on vegetable crops and it is beyond the scope of this chapter to discuss all the diseases. However, brief description of etiology, diagnostic symptoms and management practices being adopted are presented here for the economically important fungal and bacterial diseases of vegetable crops.

Metabolism - sum total of all chemical reactions in living cells

Catabolic reactions - degrade macromolecules and other molecules to release energy

Anabolic reactions - used to synthesize macromolecules for cell growth, repair, and reproduction

Can divide metabolism into 4 groups: carbohydrates, lipids, amino acids, nucleotides.

18.1 Introduction

The Packaging Institute International describes packaging as the enclosure of items, packages or products in a wrapped pouch, box, bag, cup, can, tray, tube, bottle or other container for protection, preservation, containment, communication, performance and utility. To an engineer or a scientist, it is technical matter as it is a system designed for efficient delivery of safe food products with high quality, via each and every stage of distribution chain, from production of raw material to food manufacture, packaging, retail, wholesale, consumer, disposal and finally recycling or of resource resurgence. The extent of food packaging is literally broad as it encompasses technological activities such as graphic and machinery design, package manufacture and development, shelf life testing, distribution and marketing. Food packaging science is a discipline which applies principles from four major areas of science (materials science, food science, information science and socioeconomics) to understand the properties of packaging materials, packaging requirements of foods and the packaging system. Both material science and food science have been two major contributors for food packaging development. Material science is important to understand the mechanical strength, barrier properties, appearance and physical and chemical properties of paper, glass, metal, polymer and composite. Food science is important to understand the deterioration kinetics of foods (such as microbial growth, lipid oxidation, moisture loss or gain) governs the food shelf life. Food packaging technology is a science based solutions to address specific food packaging needs; examples are tamper evident packaging, microwavable packaging, modified atmospheric packaging, and controlled atmospheric packaging which are aimed at enhancing safety, quality and convenience for the consumer.

Defining-Commercial Plant Breeding

The term commercial plant breeding originates by putting prefix ‘commercial’ before ‘plant breeding’ and is used as an adjective to plant breeding which surely is a noun. Naturally, commercial plant breeding remains largely plant breeding with slight twist that commercial plant breeding aims at delivering commercial products to be delivered to the end users that is the farmers as per the need of the consumers/markets. Thus, the farmers plant those products (open-pollinated cultivars and hybrids) which are easily accepted by the consumers and which are easy to be handled by the traders as the products reach to the traders and then from traders to the retailers and ultimately to the consumers. Along with consumers’ acceptance, these kinds of products must meet certain level of yield, maturity and resistance/tolerance to diseases and pests. Accordingly, these are designed and bred by the commercial seed companies which operate as per demand of the markets. Private seed companies operate on a business model and generate their own revenue to keep the companies running and therefore these seed companies are bound to design and breed commercially viable products. Thus, all plant breeding activities which occur at the research farm and laboratory of private seed companies aimed at designing and delivering commercially viable products are called as commercial plant breeding activities. While designing such project and running the plant breeding activities at the research farm and laboratories of the private seed companies, the emphasis has to be on ‘how to do’ and ‘how quickly to do’ rather than ‘why to do’. ‘Why to do’ issue is not totally ignored and this gets due consideration while formulating the research project based on extensive deliberations between various departments, namely, R&D, Sales and Marketing, Product Development, and Seed Production.

The term commercial plant breeding is generally not in use in public sector research institutes and the agricultural universities and certainly not in class room teachings and discussions while teaching courses on plant breeding and related courses under the domain of plant breeding. There the focus is on theory in contrast to applications which form the backbone of commercial plant breeding as practiced by the commercial organizations such as private sector seed companies which have to earn revenue by selling the products to meet the operational expenditure of running the companies and also to earn profit to run the activities of the company on long term basis in a sustainable manner and to invest in R&D. Therefore, a working definition of commercial plant breeding could be as follows.

1. TYPES AND GRADES OF IMMUNITY

The immune response, which has inherited the character of memory, as evinced by rapidity and specificity of the responses on the second exposure to antigen, was cleared the minds of scientists especially bacteriologists who could find certain cells especially lymphocytes to play a major role in immune response.
 
The fact that the blood also contains soluble protective substances both heat stable which were later known as antibody and heat labile, later called as the complement system. These two were regarded as totally separate phenomenon in the beginning years. Eventually the distinctions between specific and non-specific responses were understood.
 
There are two types of immunity
    i)    Non-specific (Innate, natural or native) immunity
    ii)    Specific (Acquired) immunity.