eChapters

Q. 1 While operating a combine harvester, the grain not collected by the
machine is called
(A) Field loss         (B) Shattering loss
(C) Gathering loss (D) Reel loss

Introduction

Finance is vital to entrepreneurship. With limited resources starting a business is a challenge. Earlier generations of entrepreneurs establishing a business were different. They first guaranteed that money would be available to start—the business. So, if one wanted to build up a unit for a business, one would undertake market research and then approach the bank. Then activities like product development, ordering equipment, determining the site, acquiring land for the facility, what government policies are applicable etc., were considered. Before starting a business, an entrepreneur considers these factors. That was the old regime.

Leaf vegetables are rich sources of provitamin-A, vitamin-C and minerals like calcium, iron etc. They also provide roughage required in human diet. The Indian Council of Medical Research (1984) recommended a daily intake of 100 g and 40 g of leaf vegetables in the diet of woman and man, respectively. Amaranth, beet leaf, spinach, fenugreek, cabbage etc. are the major leaf vegetables grown in the country. In addition, a number of under-utilized annual crops are also grown as leaf vegetables in specific regions. Tender stems and leaves of a number of perennial crops are rich sources of vitamins and minerals and are used for cooking. The major annual leaf vegetables have a few features in common:

1. Most of leaf vegetables are of short duration and the entire harvest is over within 80-90 days
2. Leaf vegetables are cultivated by direct sowing and by transplanting. In direct sowing, seeds are sown as in nursery and harvested 30 days after. In transplanted method, 25-30 days old seedlings are transplanted at a closer spacing and harvesting is done by frequent clippings or cuttings.

Introduction

Global warming needs a shift to automobile solutions that reduces/ do not produce greenhouse gas emissions. Automobile related pollution is the major source for reduction in air quality in Indian cities. India need to reduce dependency on a fossil- fuel and reduced transportation related emissions. People living in some of the Indian cities are being affected by noise pollution and electric vehicles may contribute to a reduction in noise pollution levels in the cities. Energy efficiency and emissions are two important contributing factors in transportation across the globe.

1. Introduction

India has 536.76 million livestock as per 20th Livestock Census 2019. Livestock plays a vital role in improving the socio-economic conditions of rural masses especially for landless and marginal farmers; as well as an important role in the national economy. Livestock production and agriculture are closely related and vital for the overall food security. Agriculture diversification through animal husbandry is one of the primary factors of growth in rural incomes. A higher public investment in livestock sector is the need of the hour for doubling farmers’ income. Future economic growth would have to come from improvements in animal productivity. India is bestowed with a great degree of livestock biodiversity which can be elucidated in hosting more than 200 breeds across all the species. Along with producing A2 milk, desi cattle are renowned for withstanding heat, illness resistance, immunity to ticks and parasites and low maintenance requirements. The various indigenous breeds of agricultural animals are mostly the consequence of evolutionary processes. They were improved through field progeny testing & selection. Conservation and propagation of most precious high producing elite buffalo germplasm though the cloning technique is the contribution of the scientists to the buffalo rearing farmers of the country. The Indian Jamunapari goat is one of the ancestors of the American Nubian. Goat milk is an excellent source of vitamin A, is high in digestible protein, contains significantly lower levels of alpha-S1-casein, contains slightly less lactose, and has more non-digestible carbohydrates than cows’ milk.

A. Construction, Use and Care of Light Microscope
Introduction
Microorganism are invisible to naked eyes, hence their detailed study requires a microscope. A microscope can be defined as an optical instrument consisting of a lens or a combination of lenses for getting enlarged or magnified images of minute objects. A simple microscope is essentially an ordinary magnifying lens held on an adjustable stand. Usually it gives magnification up to 20 times the size of the object. A compound microscope consists of two separate lens system – the objective and the eye piece. It gives much greater magnification (100-1500 times) than a simple microscope and is, therefore useful for viewing and examining very minute objects like protozoa, bacteria, yeast, mold and algae which cannot be seen with naked eyes.
The objective of this exercise is to familiarize the students with construction and the use of compound light microscope.
1. Construction of Microscope
A microscope contrite various parts in which principle parts are described below:
i) Frame work: All microscopes have a basic frame structure which includes the arm and base. All other parts are attached to this framework and the base support the microscope.
ii) Stage: It is a horizontal platform that supports the microscopic slide. It has a mechanical stage, which is used for holding and moving the slide around on the stage.

Coconut, cocoa (cacao), coffee, cashew, cardamom, black pepper, tea, rubber, oil palm and areca nut are the major plantation crops that are perennially grown along the coastal belt in southern States of the Country and to some extent in high rainfall zones of the northeastern States of India. These crops are also known as perennial crops. The life span of these crops varies from fifteen to sixty years or more depending upon the crop and its management. Coconut and cashew are also popularly known as the coastal trees. Cardamom and black pepper are also known as the spice crops. Once these plantation crops are well established, they mature for fruiting in three to eight years depending upon the nature of plantation crops and the crop management. The reproductive phase is seen round-the-year in case of coconut and cocoa. Cashew is one of the plantation crops with seasonality in fruiting from September to June. Cocoa is mostly grown as an intercrop in coconut gardens and in some pockets as a pure crop. Black pepper is trained to coconut and areca nut in many locations and seen as mono crop as well. All these crops are grown in laterite, sandy and alike in well drained soils. The hill slopes with terrace cultivation are also suitable for all the plantation crops. Tea, coffee and cardamom are seen on hillocks extending up to the base. Some of the plantation crops are seen in multitier cropping system as well as mixed/intercrops/homestead gardens. They are grown mostly under the rain fed and summer irrigation is beneficial for better harvest. The plantation crop distribution, production and productivity are influenced by air temperature, rainfall and the other meteorological variables viz. sunshine, cloud cover, solar radiation, vapour pressure, evapotranspiration, humidity and wind. Interestingly, coffee spread in Wayanad District while cardamom in Idukki District. Coffee experiences unimodel rainfall while bimodal in the case of cardamom.

Introduction

Although both maps and aerial photos present a “bird’s-eye” view of the earth, aerial photographs are NOT maps. Maps are orthogonal representations of the earth’s surface, meaning that they are directionally and geometrically accurate (at least within the limitations imposed by projecting a 3-dimensional object onto 2 dimensions). Aerial photos, on the other hand, display a high degree of radial distortion. That is, the topography is distorted, and until corrections are made for the distortion, measurements made from a photograph are not accurate. Nevertheless, aerial photographs are a powerful tool for studying the earth’s environment. 

Because most GISs can correct for radial distortion, aerial photographs are an excellent data source for many types of projects, especially those that require spatial data from the same location at periodic intervals over a length of time. Typical applications include land use surveys and habitat analysis. 

This unit discusses benefits of aerial photography, applications, the different types of photography, and the integration of aerial photographs into GISs.

Abstract

Upcoming era of functional foods has led food scientists and food processors to deeply understand the role of phytochemicals in promoting human health. Phytochemicals are the secondary metabolites produced by plants and are commonly found in our daily food. Natural food products seem to be good substitute for pharmaceutical supplements to improve health status of people. Therefore, consumer's interest is growing in the food items naturally containing phytochemicals, each having there own functional and health aspects. Most discussed phytochemicals in the present paper are carotenoids such as lycopene, beta-carotene, lutein and, polyphenols such as phenolic acids, flavonoids, anthocyanins and isoflavones. Major dietary source for carotenoids include orange and yellow fruits and vegetables as well as green leafy vegetables whereas polyphenols are found abundantly in green tea, wine, berries, cocoa, broccoli. Carotenoids can also be used as colorants in foods during processing. The role of polyphenols as an antioxidant is well characterized because of there ability to scavenge free radicals or bind pro-oxidant metal ions by means of their hydroxyl group. Carotenoids also play an important role in protection against photooxidative processes by acting as singlet molecular oxygen as well as peroxyl radical scavengers, thus acting as potent antioxidant. Apart from antioxidative properties multitude of health benefits are associated with carotenoids and polyphenols such as reduced risk of age-related macular degeneration, certain cancers such as prostate, lung and colon, prevention of cardiovascular disease and enhancing immunity towards infection. Hence, continuous developments are being made to combine phytochemicals to avoid improper combinations that may nullify the effect of supplements and cause lower absorbance.

Abstract

Drying is one of the most important industrial operations for preservation of food material. Due to the major limitations posed by convective drying methods, there is always a need for novel drying techniques which are technically, economically and environmentally sustainable. Based on the principle of moisture diffusion due to vapor pressure gradient, atmospheric freeze drying (AFD) offers a promising alternative to conventional drying systems. A cold gas with low water vapor pressure is used as drying medium to sublimate moisture directly from the frozen material at atmospheric pressure conditions. As a result the product gets dried at much lower temperature unlike convective drying. Thus, products dried with AFD retain better nutrition, texture and color and the process is also considerably cost effective. Major limitation of the AFD process is longer drying time, which can however be accelerated by using heat pump drying or new ultrasound technology. This chapter focuses on mechanism, benefits, limitations and comparative study of AFD with other drying methods such as hot air drying and vacuum freeze drying. It provides an insight regarding effect of AFD on properties of food material based on various studies reported in literature.

India, as a developing country has reasons to be concerned about the adverse impact of climate change on its economy. A large part of its population depends on climate sensitive sectors for livelihoods which makes it highly vulnerable to climate change. Climate change can have serious impact on its crops, forests, coastal regions, etc. which can in turn affect the achievement of its important national development goals. The issue of climate change cannot however be taken up without linking it to developmental needs such as poverty, health, energy access and education. Traditionally climate change experts have focused on mitigation measures, adaptation measures have also been acknowledged of late as effective and equitable means to deal with climate change impacts. Most of the mitigation measures are high in terms of technology and capital. Therefore, while developed economies choose to mitigate climate change by making heavy investments, developing economies choose to adapt (Monika and Hooda, 2018). There is increasing recognition that the world’s current progress on reducing greenhouse gas emissions is not occurring rapidly enough to avoid impacts from climate change in the coming century. Because of this, the world is “committed” to a certain level of global warming and therefore,

Introduction

International agricultural setup has appeared as it now taking all out consideration and agricultural heritage, crop voyage, crop classification and its significances. International cooperation has contended a big role in developing and strengthening the research system in Asian country. several developed countries like USA, UK, USSR, Canada, Australia, Japan, many European countries; Charitable establishments, etc.; altruist and Ford Foundations; varied International Agencies like FAO, UNDP, UNESCO, World Bank, etc.; and also the International Agricultural Research Centres below the consultatory cluster on International Agricultural Research (CGIAR) System have contributed extensively to the explanation for agricultural RESEARCH in Asian country. Spectacular achievements in increasing the food production have raised the country’s image significantly, and also the bilateral arrangements have modified from the erstwhile donor-donee standing to relationship of equal partnership in research. The reciprocity and mutuality of interests with the less developed and in addition because the technologically advanced countries square measure the essence of international co-operation. The government has approved ICAR, motor-assisted by the board of directors of Agricultural Research and Education (DARE), to enter into bilateral cooperative agreements with many countries and agencies. The mode of collaboration ordinarily follows the pattern of: (a) exchange of germ-plasm of plant and animal origin; (b) exchange of scientific and technical information; (c) visits of scientists and experts; (d) coaching of scientists; and (e) infrastructure development.

The term “research setting” describes the specifics of the location where the study was carried out. The study area is typically a specific geographic area, such as a state, district, block, or gram panchayat area, chosen based on the investigator’s convenience and with suffice. The term research setting implies the specific details of the location where the study was carried out are referred to as the research context. Typically, the study area consists of a specific geographic area, such as a state, district, block, or gram panchayat, chosen based on the investigator’s convenience. The investigator should have sufficient knowledge of the area’s location, communication infrastructure, etc. to enable them to easily collect data from every corner of the area. Each setting” describes the specifics of the location where the study was carried out. The study area is typically a specific geographic area, such as a state, district, block, or gram panchayat area, chosen based on the investigator’s convenience and with sufficient knowledge of the area’s location, communication infrastructure, etc. to enable the investigator to easily approach every part of the area for data collection. The knowledge of the area’s location, communication infrastructure, etc. to enable the investigator to easily approach every part of the area for data collection.” describes the specifics of the location where the study was carried out. The study area is typically a specific geographic area, such as a state, district, block, or gram panchayat area, chosen based on the investigator’s convenience and with sufficient knowledge of the area’s location, communication infrastructure, etc. to enable the investigator to easily approach every part of the area for data collection. Because of the COVID-19 epidemic, the majority of the data collection for this study was conducted over the phone in accordance with the interview schedule. In order to easily comprehend the people’s knowledge, attitudes, and behaviours, investigators also need to have a fundamental awareness of their sociodemographic background. A research setting is an environment where research components and inputs are interwoven, contextualized, and mutually enhance system performance. The research setting has a crucial role in describing and affecting the interactions between various components and elements. The idea behind this kind of presentation is to absorb the study environment in terms of wider

INTRODUCTION
Canopy management is one of the most important management practices in an orchard. It is the ‘art’ of fruit growing involving manipulation of tree canopies to optimize the production of quality fruits. In fact it forms the basis of precociousness, productivity and longevity of the fruit trees. Canopy management is an important aspect of fruit culture due to its effect on yield, quality, vigour, and the prevention of diseases.
 
In orchard, light is critical to the growth and development of trees and their fruits. The green leaves harvest the sunlight to produce carbohydrates and sugars which are transported to the sites where they are needed – buds, flowers and fruits. Better light penetration into the tree canopy improves tree growth, yield and fruit quality. Training and pruning, affects the tree shape and facilitate exposure of leaves to sunlight. An ideal training strategy centres around the arrangement of plant parts, especially, to develop a better plant architecture that optimizes the utilization of sunlight and promotes productivity. Besides, development of strong scaffold system helps the trees to produce heavy crop loads of quality fruits without any major limb breakage.

Climate change is one of the most important global environmental challenges facing humanity and as per the instrumental records, the earth’s climate system has demonstrably changed on both global and regional scales since the preindustrial era. Further evidence shows that most of the warming (of 0.1°C per decade) observed over the last 50 years, is attributable to human activities. The levels of greenhouse gases namely carbon dioxide (CO₂), methane (CH₄) and nitrous oxide (N₂O) have increased markedly as a result of human activities. The CO₂ concentration in atmosphere is now more than 400 ppm and the decadal increase is from 0.86 ppm per year to 1.99 ppm per year (Table 16.1) which is the highest ever. The Intergovernmental Panel on Climate Change (IPCC, 2007) projects that the global mean temperature may increase between 1.4 and 5.8 oC by 2100. This warming of the earth-atmosphere system is expected to have severe impacts on the global hydrological system, ecosystems, sea level, crop production and related processes. Agriculture sector is the most vulnerable entity in light of the global warming and its impacts.

Aristotle, Shannon and Weaver, Schramm, Berlo, Westly and Maclean, Leagan, Rogers and Shoemaker, Littererls model and Dance’s Helical Model-Elements of communication-communication barriers

Introduction

Models are symbolic representation of structures objects or operation. They can be used to show the size shape or relationship of various parts or components of an object or process. It helps to explain the working of a system. A model helps to get a whole idea of the system.

Model help to illustrate, predict and explain the concept

They can be structural or process oriented

Make us to understand the way how to interpret the process

Introduction

The issue of environmental protection has become increasingly important in recent years, and one of the most effective ways to address this problem is through the use of recycled products. Recycling helps to conserve natural resources, reduce waste, prevent pollution, and combat climate change making it a critical part of any sustainable development strategy. In this chapter, we can explore how recycled products can help protect the environment and the many benefits that come with their use.

Hibiscus a well known member of the family Malvaceae, grows as an evergreen shrub plant. The plant is extensively cultivated as an ornamental plant that bears large flowers on the bushy hedges. These enormous flowers are usually dark red in colour and are not usually fragrant. The huge size and the reddish colour and hues attract humming birds (Kumar and Singh, 2012). The generic name is derived from the Greek word “hibiskos” which was the name Pedanius Dioscorides gave to Althaea officinalis. Hibiscus rosa-sinensis was named by Carolus Linnaeus. The Latin term “rosa-sinensis” literally means “rose of China”, though it is not closely related to the true roses. Member species are often noted for their showy flowers and are commonly known simply as hibiscus, or less widely known as rose mallow. The hibiscus is used as an offering to goddess Kali and Lord Ganesha in Hindu worship. Hibiscus is an important flowering and garden plant. It has various medicinal values (Chopra et al., 1996 and Sayed et al., 2012).

ORIGIN AND DISTRIBUTION

The ancestors of the modern exotic hibiscus were originally native to Mauritius, Madagascar, Fiji, Hawaii, China and India. Ornamentally most important species is Hibiscus rosa-sinensis. There is no known record of the history of the domestication of Hibiscus rosa-sinensis. In one view it is believed that the species is a native to China and was first cultivated by the Chinese for its showy flowers (Kimbrough, 1997). No extant wild populations of the species have however, been reported from that country. Another view holds that the species is a native of the South Indian Ocean islands of which Madagascar, the Mascarene Islands and the Rodriguez Islands are a part (Borssum Waalkes, 1966). This view is strengthened by the fact that three Hibiscus species genetically compatible with H. rosa-sinensis are native to this area (Singh and Khoshoo, 1989). It is thought that the species was collected and domesticated on these islands by far easterner during their westward migration.

INTRODUCTION

The chemical compounds needed for growth and metabolism in plants are termed as nutrients. Mineral nutrition of fruit plants is a vital soil management practice in an orchard. The nutrients are converted to cellular constituents or used for energy purposes through metabolic process. Broadly the essential plant nutrients may be divided into macro-nutrients and micro-nutrients. Macro nutrients are needed in plants in relatively higher amounts than micronutrients.
 
Macro nutrients: C,H, O, N, P, K, S, Ca, Mg. 
Micro nutrients: Fe, Mn, Cu, Zn, Mo, B, Cl, Ni.
 
Altogether 17 elements are considered essential for normal growth and production of a plant.While elements like cobalt, sodium and silicon have been established as essential elements for some plant species and not all. C-H-O matrix accounts for over 90% of the dry matter and is usually 20 to 50% of the fresh weight of the whole plant. Chloride is a most unusual nutrient as it is often present in plants in high concentrations yet its essential requirement is very much lower. Chlorine like Na and K plays an important role in osmoticum. The nutritional needs of fruit trees can be assessed through leaf and soil analysis, tree growth and cropping, and past experience.