eChapters

1. Introduction The chapter aims to bring out the potential benefits of radiation processing technology for value-addition of millets. How the radiation processing technology can be exploited for making millets as a popular staple food would be the central theme. The key focus is to establish if irradiation (the term generally used for radiation processing of any material) can be employed for making millets for different purposes relevant to farmers and consumers. In order to understand and prove, we would list out the challenges involved in developing the market for millets. The key points that need to be considered for this go-to-market strategy for millets are : a) Millet grains have a long shelf-life, much better than the popular grains e.g., rice and wheat, consumed worldwide, but millet flour shelf life is significantly much shorter.

Rural development programmes are created and maintained for influencing people to make changes in their way of living and of making a living. The existence of such programmes implies that the present situation of the rural people is not what it should and could be, that something different should prevail, and that it is possible through appropriate action to attain a more desirable status for them.

Changes that are important to people are those that help them to meet their needs for biological, economic, social, aesthetic and moral well being. Basically, all programmes for rural development exist to help people to meet their needs. If programmes do this people have their free choices in societies and will not participate for long periods in them. The element of people’s needs, therefore, becomes a central concern of planner for rural development. Hence, the entire process of planning for rural development implies a need for change. But now the question arises that change from what, to what, by whom, where and by what methods?

The society has to find ways to adjust itself so that people meet their needs for an improved economic status, for being more useful citizens and for enjoying a higher degree of social stratification, it must identify these conditions and plan realistically to achieve them. It is the prime concern to identify that what needs do people have ? How can needs be identified? What plan of priority should be set up for meeting people’s needs? What resources are necessary to meet people’s needs? How should resources be organized and directed to help people’s meet their needs? These questions give the key orientation and justification for rural programme planning.

6.1 INTRODUCTION

Besides simple analysis, GIS is useful to do advanced analysis like network analysis, spatial analysis, 3D analysis and modeling. Different softwares are available to perform such analysis and the above mentioned analysis is done in separate modules of the softwares.

6.2 NETWORK ANALYSIS

Network consists of well connected linear features. Roads, railway line, water distribution system, sewer line, streams are some of the examples of networks. These networks consists of nodes and arcs with designated directions and connection with other linear features. Networks are topology based with attributes for the flow of objects like traffic. Road network will be considered for explaining network analysis.

Road map is digitised with nodes and arcs. Signals, accidents are represented as points. Road is represented as line and two or more roads intersect at nodes. Attributes are added to the nodes and lines. Dynamic segmentation model is used for network analysis. It is built on lines of network. In road network analysis, attributes for travel time, one way street, two way street, right turn, impedance are added to the nodes and arcs. A link is the line running between two nodes. Link impedance is the cost of passing through the link. Travel time is different in links in cities due to varying traffic at different locations. Time taken to pass through a known length of link may give the cost but the travel time in a link is not uniform because of varying speed designated in the link as 20 km per hour and 30 km per hour. Hence it is important to consider the length of link and also the travel time. If the speed limit is 20 miles per hour for a length of 2 miles, then the travel time is 6 minutes (2/20x60 minutes). Also tuning in the network is considered. A road may have a maximum of 12 possible turns excluding U turns. There are right turn, left turn, straight way for each road. Also U turn is possible. This turning takes different time depending on the signal. Straight way takes less time but left and right turn may require some more time. If signals is available then signal time should also be taken into account. Fig 6.1 show the possible turns in a road.

15.1 Section-A : Write True / False

Q.1 In bivariate distribution if the change in one variable afects a change in the other variable, the variables are said to be correlated.

Q.2 If the change in both the variables takes place in the same direction then the variables are said to have a positive or direct correlation.

Q.3 The pair of variables say, Income and expenditure in house hold or the height and weight of a group of children possess the direct correlation between them.

Q.4 If the change in both the variables takes place in oposite directions, then the variables are said to have "Negative or inverse" correlation.

Q.5 The pairs of variables say (i) Price and demand of a commodities or (ii) Volume and pressure of a perfect gas" have a negative correlation.

Q.6 The two variables are said to have a perfect positive correlation if the deviation in one variable is followed by a corresponding and proportionate deviation in the other variable.

Q.7 There are some funny combinations of variables between which the correlation are said to be "spurious or nonsense".

Hyperaemia and Congestion
Definition
Hyperaemia is increased volume of blood in affected tissue or part.
Hyperaemia (Active Hyperaemia)
Occurs in arterioles or arteries
Increased blood flow in capillaries
Congestion (Passive Hyperaemia)
Occurs due to impaired venous drainage
Stasis of blood in veins
classification of hyperaemia

India, internationally recognized as the principal producer, consumer and exporter of spices globally, is often referred to as the spice bowl of the world. A total of 75 spices out of 109 are cultivated in the country, among which
pepper, cardamom, chillies, ginger, turmeric, coriander, cumin, and fenugreek are of significant importance. The approximate export of spices during 2021- 22 was 15,31,154 MT valued at 30,576.44 crore (US $4,102.29 million)
compared to 17,58,985 MT valued at 30,973.32 crore (US $ 4,178.80 million) during the previous financial year. Indian spices are exported to more than 180 destinations, with the leading importers being USA, China, Bangladesh, Thailand, UAE, Sri Lanka, Malaysia, UK, Indonesia, and Germany. The key spice-producing states of India include Himachal Pradesh (ginger), Haryana (garlic), Karnataka (pepper, ginger, cardamom (small), chilli, turmeric and garlic), Orissa (ginger, chilli, turmeric, and garlic), Kerala (pepper, chilli, turmeric, nutmeg, mace, and clove) and Rajasthan (coriander, chilli, cumin, garlic, fenugreek, fennel, and ajwain).
Seed Spices in Rajasthan Economy
Of the 75 spices grown in India, 20 are classified as seed spices, where the economically important part is the seed.

Practical applications and field techniques in spices breeding are essential for developing new varieties that meet the needs of farmers, processors, and consumers. These techniques involve a combination of traditional methods and modern technologies to select, test, and propagate spice plants with desirable traits. Here’s an overview of the key practical applications and field techniques used in spices breeding:
1. Selection and hybridization
• Mass selection: This traditional technique involves selecting the bestperforming plants from a large population based on desirable traits such as yield, flavor, and disease resistance. The selected plants are then propagated
to create the next generation.
• Hybridization: Cross-breeding different varieties or species of spices to combine desirable traits from both parents. This technique is used to create hybrids with improved characteristics, such as higher yield, better flavor, or
enhanced resistance to pests and diseases.
• Example: Cross-pollinating different varieties of chili peppers to produce hybrids with higher capsaicin content for spicier flavors.

What is book keeping?
Book keeping    is defined as;
1. The art of recording business transactions (pecuniary transactions) in a regulator and systematic manner.
2. Book keeping is the science and art of correctly recording in books of  accounts all those business transactions that result in the transfer of  money or money’s worth.
3. Book keeping is an art of recording day to day business transactions in a  set of books in a most systematic manner.
4. It is the process of analysing, classifying and recording transaction in accordance with pre-conceived plan.

5.1 Introduction

A steam can be defined as a flow channel in to which the surface runoff flowing over the land surfaces and base flow/ground flow flowing below the ground surfaces meet. It receives the total flow from a specified basin. Streamflow representing the runoff phase of the hydrologic cycle is the most important basic data for hydrologic studies. Interestingly, stream flow is the only part of the hydrologic cycle that can be measured accurately. Stream flow is a historical data and like rainfall and runoff, it is a stochastic hydrologic variable. It is also called as discharge or rate of flow. Discharge is defined as the volume of water flowing through a cross section in a unit time.

Flood management is a continuing process of assessing flood risk and coordinating prevention, preparedness, response, recovery, and adaptation. Unlike flood control, which often emphasizes physical structures, integrated flood management accepts that floods cannot always be eliminated and seeks to balance their risks and beneficial functions. It protects life and property while considering river-basin development, environmental sustainability, social needs, and economic feasibility. This chapter explains flood-management concepts, objectives, purposes, and techniques. It discusses structural and non-structural actions, forecasting, watershed treatment, afforestation, rainwater harvesting, floodplain zoning, community preparedness, institutional responsibilities, interlinking proposals, and government programmes. Emphasis is placed on coordinated, basin-wide and risk-informed decision-making.

I. General information

1. Shrub is a woody or semi-woody perennial plant with little or no trunk and grows up to a height from 50 cm to less than four meters.
2. Shrubbery border is an area of the garden devoted exclusively for growing shrubs planted in a row of rectangular fashion.
3. Plants suitable for shrubbery border.

11.1 Introduction

Our Country is a fast developing nation for the overall development and has proved that the country which was known for a begging bowl for food grains has turned up towards self-sufficiency and also has excess production to feed the present level of population. From about 50 MT of food grain production in 1950-51, harvest in 2010-11 reached over 241 MT, highest ever along with high production of fruits, vegetables, milk, egg and fish. This increased food production in the country has mainly been achieved through productivity gains, as the net sown area has remained static for the last four decades.

8.1 Design of Canal Embankments

 There are two aspects of canal embankment design.

 (i) The general requirement, such as free board, dowel, service/inspection road, drainage of banks etc. The aspect of free board is discussed in Para

8.2 to 8.3 and that of service/ inspection road in Para

 8.4 and drainage of banks in Para 8.5 in this chapter.

 (ii) Safe design of embankment i.e. Hydraulic and structural requirement.

It includes stability of inner and outer slopes, Structural safe design of inner cut slopes in deep cuttings in different types of soils/rocks of varying nature and ground water conditions. Stability of slopes may include drainage, so as to prevent rock falls/debris in canal. For outer slopes in embankment (filling sections) hydraulic gradient/pharetic line, toe drains etc, similar to the earthen dams, on different types of soil/rock foundation with respect to varying ground water level conditions are important.

The canal embankments in filling may even fail through its foundations by sloughing or liquefactions. All these aspects of canal embankments are discussed in this chapter in Para 8.4 to 8.9.

1. Which of the following states has nutrient use of < 100 kg/ ha?

(a) Madhya Pradesh                (b) Karnataka

(c) West Bengal                       (d) Uttar Pradesh

2. Which of the following is the leading state in maize production

(a) Bihar                                   (b) Uttar Pradesh

(c) Punjab                                (d) Gujarat

1.1 Some Useful Formulas Related to Farm Machinery

12.1 General

The term “biomass” generally refers to renewable organic matter generated by plants through photosynthesis. Materials having organic combustible matter is also referred under biomass. Biomass is an important fuel source in our overall energy scenario. Biomass is produced through chemical storage of solar energy in plants and other organic matter as a result of photosynthesis. During this process conversion of solar energy in sugar and starch, which are energy rich compounds takes place. The chemical reaction of photosynthesis can be written as:

6CO₂ + 6H₂ O + sun light → C₆ H₁₂ O₆ + 6O₂ + 636_kcal

It indicates that the storage of 636 kcal is associated with the transfer of 72 gm carbon into organic matter. Biomass can be directly utilized as fuel or can be converted through different routes into useful forms of fuel. In fact, biomass is a source of five useful agents, which start with `F’ like Food, Fodder, Fuel, Fiber and Fertilizer. Further, biomass has many advantages like.

4.1 INTRODUCTION

All soil components contribute in some measure to cation exchange. The source, extent, and quality of the contribution of each to the cation exchange capacity is varied and complex. Ocasionally, reactions between components alter the extent and quality of cation exchange. Also, in some this is strongly influenced by the pH of the soil-water complex, and the electrolyte content of the soil solution. Indeed, when ‘simple and rapid’ methods, empirical or allegedly fundamental in origin, appear in the literature, they must be viewed circumspectly. Mostly, they provide an incomplete, or a one-sided, picture of the phenomenon. To justify his invention, the experimenter usually provides correlations with other intrinsic soil properties (e.g. the concentration by weight and the mineralogy of the <2 jxm particles, the organic matter content, the surface area) or with the reaction of soil with its environment (e.g. plant growth and composition). However convincing such statistical parameters might be for the population of soils investigated, they do not help elucidate, and may indeed mask, the true extent and quality of cation exchange.

This chapter deals with current views on the sources, extent and quality of cation exchange, and with comprehensive methods for evaluating these. The relationship between the properties thus observed and values obtained from simple and rapid procedures is considered.

1. Introduction

Plum is one of the important stone fruit crops of temperate region throughout the world. The Japanese group of plum is native to China but was domesticated in Japan and subsequently was introduced to different parts of the world. In India, Japanese plums were introduced by European settlers and missionaries around 1870. Plum grows well in areas ranging from 900 m to 1600 m above mean sea level.

1.1. Uses

Among deciduous fruits, plum is widely distributed in the world, because of wider adaptability among different species and cultivars of plum to varied agro-climates and soil conditions. Plum is consumed as dessert, dried and processed products. Plum fruit is considered best to overcome the jaundice. Its fruit use for a preparation of juice and squash. It ranks next to peach in commercial production. It is widely cultivated in several countries in Europe, Asia and in the America.

Calcium is a vital mineral playing an essential role in numerous physiological processes, including bone formation, muscle contraction, nerve impulse transmission, and blood clotting. Proper calcium metabolism in animals is regulated by a complex interplay of dietary intake, hormonal control (mainly by parathyroid hormone; PTH, calcitonin, and vitamin D), and organ systems such as the kidneys, intestines, and bones. Imbalances in calcium homeostasis, whether due to dietary deficiencies, genetic predispositions, hormonal dysfunctions, or systemic diseases, can lead to a wide range of disorders affecting the skeletal system and overall health. Calcium-related disorders in animals can broadly be classified into those resulting from calcium deficiency, excess, or abnormalities in calcium regulation. Among these, skeletal manifestations are the most pronounced, as the bones act as a primary reservoir for calcium in the body. Various diseases related to calcium disorders and their nutritional management are discussed
below:
a) Rickets
Rickets is a skeletal disorder that affects young animals and birds, characterized by improper bone mineralization. This condition occurs primarily due to deficiencies in vitamin D, calcium, and phosphorus, which are essential for proper bone development. Rickets can lead to deformities, pain, and reduced growth rates, and understanding its causes, symptoms, mechanism, and nutritional management is crucial for prevention and treatment.