eChapters

INTORDUCTION

Spices are strongly flavored aromatic substances of plant origin which are commonly used for seasoning, cooking food and for preserving other food stuffs. There are about 70 species of spices grown in various parts of the world. Those which are used most commonly throughout the world are grown in India and other parts of South Asia.

The seed spices are annual herbs, whose dried fruits or seeds are mostly used as spices. The seed spices are used for culinary, confectionary, perfumery, cosmetics and pharmaceuticals industry. There are about 20 seed spices grown in India (Table 1) and nine out of them are prominent. The most important among them are belongs to family Apiaceae (coriander, cumin, fennel etc). about 9 lakh ha area is growing in seed spices in the country with annual production of about 5-6 lakh tones (Anonymous, 2003). India is the world’s largest producer, consumer and exporter of seed spices. The foreign exchange earned through export of seed spices is more than Rs 200 crores annually. India exports raw spices as well as value added items to nearly 70 countries in the world and is meeting 51% of the global demand of these commodities. There is good potential for increasing export of seed spices, if production as well as quality is increased. The level of productivity in various seed spices is comparatively low as compared to other countries. There are many production constrains attributed to low productivity. The lake of suitable high yielding varieties suiting to different agro-ecological regions and more incidences of diseases and insect pests. Among different insect pests, coriander aphid, Hydaphis coriandari (Das) is one of the most destructive and widely distributed pest of coriander (Jain, 1984 and Jain and Yadav, 1989). Recently brown wheat mite was observed attacking coriander and other spices (Jain and Yadav, 1986 and 1989).

Principle

The residue from the cell walls determination is extracted with boiling 8 percent sulphuric acid for one hour to hydrolyse the hemicellulose without dissolving cellulose, lignin or acid insoluble ash.

Equipment
    1.    Refluxing apparatus.
    2.     Filtering apparatus: same as described for cell wall determination
    3.    Filtering crucibles: same as described for cell wall determination.

Reagents

    1.    Sulphuric acid (8%) : Standardize Reagent grade sulphuric acid to specific gravity of 1.052 at 20ºC.
    2.    Bromocresol green indicator solution: Same as used for lignin determination.

Heliconia belongs to family Heliconiaceae is popular as ornamental plants and cut flowers because of their brilliant colours and exotic appearance. The genus name “Heliconia” is derived from “Helicon”, a mountain in southern Greece regarded by the ancient Greeks as the home of the Muses, thus suggesting the relationship between these plants and the bananas, genus Musa (Berry and Kress, 1991). Unique features of the Heliconiaceae are (1) medium to large erect herbs rising from underground rhizomes;(2) each erect shoot is composed of a stem and leaves, whereas the stem is made up of an axis covered by overlapping sheathing leaf bases, technically called a pseudostem;(3) inverted flowers and (4) the presence of a single staminode. Heliconia has long been popular horticulturally because of their showy inflorescences. It was so attractive that early explorers of the tropics returned to Europe with several species that became prized green house specimens. Heliconia, grown in nearly all of the tropical regions of the world, including Africa and Asia. In India, heliconia is grown in North-East region and Kerala.

ORIGIN AND DISTRIBUTION

Heliconias are native only to Central and South America and some of the islands of the South Pacific, for horticultural and commercial popularity. Berry and Kress (1991) stated that they are native from Tropical America and found at different altitudes, from sea level up to 2,000 meters in Central and South America, and up to 500 meters in the South Pacific Islands (Criley and Broschat, 1992).

Most of the Heliconia species are distributed primarily in Neotropical areas from the North of Mexico to the South of Brazil (Santos, 1978, Dahlgren et al., 1985 and Kress, 1990). A small Paleotropical group, about eight species, occurs in islands of the South Pacific (Tomlinson, 1969 and Kress, 1985). There are approximately 40 Brazilian species with two primary areas of distribution: the Amazon basin and the Atlantic coastal forest (Kress, 1990). About 100 or more species, native mainly to tropical and subtropical South and Central America (Cronquist, 1981).

Several attempts have been made over the years to sort out the taxonomy of the Old World Heliconia. Baker (1893), followed by Schumann (1900) and Winkler (1930), dealt with the problem of identity and origin of these taxa by assigning them to the neotropical species Heliconia bihai L. Others such as Ridley (1908a, b), Backer (1920) and Green (1969) recognized the distinctive and endemic features of the paleotropical taxa that separated them from the neotropical species. This ornamental rhizomatous herbaceous plant from the Heliconia genus, belongs to the Musaceae family, now constitutes the Heliconiaceae family in the Zingiberales order. The various species of Heliconia are subdivided into five subgenera: Heliconia, Taeniostrobus, Stenochlamys, Heliconiopsis and Griggisia; and 28 sections (Kress et al., 1993).

The method of preserving various food stuffs by drying them, and thereby depriving microorganisms of the water necessary for their growth, has been known for centuries. According to Marco Polo’s accounts of his travel in Asia in 13^th century, soldiers of Kublai Khan carried dried milk on excursions. Before it was used, water was added to a portion of dried material. Mixing was accomplished by movement of the horse during riding on the trip. The recombined product was then consumed at the mealtime. The belief is that part of the fat was removed from the milk before drying and dehydration was accomplished by solar heating.

Drying is defined as the removal of the liquid, usually water, from a product by evaporation, leaving the solids in an essentially dry state. Today the production of dried milk and milk products has become important segment of dairy industry. Dry milk provides a means of preserving the excess milk supply during the flush season for use during the lean season. The value added dried dairy products like malted milk foods, infant food and infant formulae and dairy whiteners are convenient ready to use products having wide acceptance. The water content of milk powder ranges between 2.5 and 5%, and no microbial growth occurs at such low water content. Drying extends the shelf life of milk, simultaneously reducing its weight and volume. The main purpose of drying milk are: a) to improve the storage life of the product due to low moisture content, b) to reduce cost for storage and transportation of product due to reduced bulk, and c) to provide convenient product for utilization in many dairy and food preparations.

The production of dried milks to a great extent is now being governed by the market requirement and to some specialized use of such products. Considerable quantities of dried skim milk powders are being used extensively in the preparation of ‘Reconstituted and Recombined milks”. Milk powders are also used extensively in the manufacture of ice cream, bakery products, confectionary products, cottage cheese and in other cheese varieties. The greatest proportion of milk powder is utilized in confectioneries, such as milk chocolate, caramels, soft sweets, coatings, biscuits and cakes. In these products, milk powder has a special effect on the quality of particular products: it improves consistency, flavour as well as nutritional value and shelf life.

• Introduction
• Characteristics of Management Information System
• Management Information Systems Advantage
• Outputs of a Management Information System

Infertility means reduced fertility or the cow is ultimately capable of becoming pregnant and giving birth to a live calf but the interval may be much longer than 12 months. 

I. Problems leading to infertility

1. No signs of estrus

When the animal is pregnant and for a short time after calving the cows may not show estrus signs. A thorough palpation of the ovaries and tubular genital tract should be performed and a repeat examination may be necessary.

Introduction

Rain fed agroecosystem occupies 68% of India’s cultivated area and supports 40% of the human beings and 65% of the livestock population. It produces 44% of food requirements, thus has and will continue to play a critical role in India’s agriculture (Singh et al. 2004). Besides their well established role in agriculture, livestock have crucial role in food security and as risk aversion mechanism for sustaining family, whenever there is crop failure. Indian hot arid zone which is about 12% of total geographical area of the landmass of 0.32 million km2 has maximum covering in western Rajasthan i.e. 61% of the total area whereas the other areas in arid region are available in the states of Gujarat, Punjab, Haryana, Andhra Pradesh and Karnataka accounting for 20, 5, 4, 7 and 3% of hot arid area whereas the cold arid area of 8.4 million ha lies in the state of Jammu & Kashmir covering the Leh and Ladakh region.

Introduction

Climate change and climatic variability are expected to reduce agricultural productivity and threaten food security of the world, particularly in developing countries. Producing enough food for the increasing population in a background of decreasing resources and a changing climate scenario, is a challenging task. Agriculture, forestry and land use change account for about 30% of greenhouse gases (GHGs) emissions. Therefore, mitigation of GHGs emission while enhancing production is another challenge in agriculture.
 
Conservation agriculture (CA), with the three core inter-linked principles of minimizing mechanical soil disturbance, enhancing organic matter cover on soil and diversification of crops, is a viable option for sustainable agriculture with an effective solution to climate change adaptation and mitigation. The principles can be integrated and applied into most of the rainfed and irrigated production systems including horticulture, agro-forestry, organic farming, rotational farming and integrated crop-livestock systems to strengthen ecological sustainability. Worldwide about 105 Mha land is under CA and the area is increasing. However countries like USA, Brazil, Argentina, Canada and Australia occupy about 90% of the area under CA. The CA, which is advocated as an alternative to the conventional production system for improving productivity and sustainability, is now adopted by many countries and agencies as a lead model for sustainable agricultural intensification.

Indication

Irreparable injury.

Frost bite, burn.

Malignant neoplasia.

Incurable peripheral vascular disease.

Necrosis, gangrene, extensive injury of nerve of fore limb.

I. WALL COMPONENTS – CHEMISTRY

The main ingredient in cell walls are polysaccharides (or complex carbohydrates or complex sugars) which are built from monosaccharides (or simple sugars). Eleven sugars are common in these polysaccharides including like glucose and galactose. Carbohydrates are good building blocks because they can produce a nearly infinite variety of structures. There are a variety of other components in the wall including protein, and lignin. Let’s look at these wall components in more detail:

A. Cellulose: β1,4-glucan (structure provided in class). Made of as many as 25,000 individual glucose molecules. Every other molecule (called residues) is “upside down”. Cellobiose (glucose-glucose disaccharide) is the basic building block. Cellulose readily forms hydrogen bonds with itself (intra-molecular H-bonds) and with other cellulose chains (inter-molecular H-bonds). A cellulose chain will form hydrogen bonds with about 36 other chains to yield a microfibril. This is somewhat analogous to the formation of a thick rope from thin fibers. Microfibrils are 5-12 nm wide and give the wall strength - they have a tensile strength equivalent to steel. Some regions of the microfibrils are highly crystalline while others are more “amorphous”.

In molecular biology and biochemistry, the ability to accurately and reproducibly measure and transfer small volumes of liquids is critical for obtaining useful results. For volumes less than 1 ml, the most common method for measuring liquid volumes involves the use of a device known as a pipetman or micro-pipette.

The pipetmen can be both fixed and variable volumes. Commonly used pipetmen are: P1000, P200, P20, P10 etc. P1000 are useful for volumes from 200 to 1000 µl. P200 are useful for volumes from 20 to 200 µl. P20 are useful for volumes from 0.5 to 20 µl. For beginners fixed volume pipetmen are more useful. It is important to ascertain whether the correct pipetman is chosen for measuring the volume one needs.

3.1 Introduction

The production of food grains in India is around 200 million tonnes and most of the grains are converted to primary products after primary processing such as threshing, dehulling, de-branning. Some of the grains are converted to secondary products such as flour or grits. The yields of primary and secondary products range between 65-80% indicating a wastage of 20-35%. These wastes lead to unclean surroundings and air pollution due to fine dust. Hence, proper waste management/utilization of food grain processing industries has become a societal need for a clean environment.

The term ‘waste’ has different meanings to different people. It can be retractions from the main process or less utilizable by-products or undesirable waste material depending on the commodity. All food-processing industries generate wastes and create problems for its management. The best way the food processing industry can treat its waste is to avoid producing it. Much of the waste now being produced or generated in some food processing plants can become a managed resource for producing economic credits. In fact, waste utilization is one of the world’s prominent industries and its activities cut across the normal divisions into which industries are placed. Similarly, there will be wastes from agriculture, animal and meat industries, textile, rubber etc. Even the local governmental activities that collect and dispose the household wastes become apparent in terms of the huge size of it.

1. OVERVIEW OF AGRICULTURAL SCENARIO AND EXTENSION SYSTEMS IN JAPAN

1.1. Japanese Agricultural Policy and its Short History

The modernization of Japan’s agriculture was started through mechanization such as cultivators, rice planting machines, tractors and combines in the 1960s. Mechanization led to a large decrease in hours spent on rice cultivation, and the redundant labor force moved from agriculture to the manufacturing industry. This movement resulted in the modernization of rice cultivation, high productivity and high income for farm households.

On the other hand, a decreased demand for rice caused by westernization of the diet, e.g. greater consumption of animal products, became a serious problem. The national government decided to regulate rice production, and the acreage of paddy fields equivalent to the excess rice production has been used to cultivate other plants since 1978. Nowadays, the permitted area for planting rice is about 60 per cent of the paddy fields, with the other 40 per cent used to cultivate other plants such as barley, soybean, buckwheat and so on.

Obviously human have had to deal with microbes even before the recorded history. The first record of human using microorganisms comes from ancient tablets from mid east.

Babylonians were using yeast to make beer over 8000 years ago and acetic acid bacteria to make vinegar over 6000 years ago. About 5000 years ago, Persia (Now Iran) region recorded the wine making.

The Romans had God for specific microorganisms. The roman God of mold and mildew were “Robigus” and “Robigo” which mean crop rust. (Rust is one of the plant disease caused by fungus). God Robigus was very much feared because of crop lost. About 2000 years ago, Romans proposed that diseases were caused by tiny animals. But, fundamentalist religions had a strong hold over the progress. The real microbiology history starts from 1600s, when people began to make crude lenses and microscopes.

The following are the scientists and their role in the development of microbiology:

Abstract

The Rawana landslide, located in Sirmuar district of the Shimla Himalayas, Himachal Pradesh is repeatedly active in the recent years. It is a NE-SW oriented slide with the crown in the southwest and the wider toe in the northeast resting in Giri River. During some of the sliding events emanations of heat and gases were also inferred. In order to understand the landslide phenomenon and the causative factors, and there from to evolve mitigation measures, detailed studies of the slides were under taken. The Landslide hazard zonation mapping carried out in Rawana landslide using LHEF rating based BIS method indicates that it is located in high hazard zone. The detailed studies show the complex geological, structural, morphotectonic and hydrological setting. From the studies it is surmised that the toe erosion by Giri river and the rainfall infiltration in the mid slope region are responsible for the slide. Remedial measures have been accordingly evolved.

8.1 Introduction

Electron Microscopes were developed due to the limitations of Light Microscopes which are limited by the physics of light to 500x or 1000x magnification and a resolution of 0.2 micrometers. In the early 1930’s this theoretical limit had been reached and there was a scientific desire to see the fine details of the interior structures of organic cells (nucleus, mitochondria etc.). This required 10,000x plus magnification which was just not possible using Light Microscopes. The Transmission Electron Microscope (TEM) was the first type of Electron Microscope to be developed and is patterned exactly on the Light Transmission Microscope except that a focused beam of electrons is used instead of light to see through the specimen. It was developed by Max Knoll and Ernst Ruska in Germany in 1931. The first Scanning Electron Microscope (SEM) debuted in 1942 with the first commercial instruments around 1965. Its late development was due to the electronics involved in scanning the beam of electrons across the sample. Electron microscope has been a valuable tool in the development of scientific theory and it contributed greatly to biology, medicine and material sciences. This wide spread use of electron microscopes is based on the fact that they permit the observation and characterization of materials on a nanometer (nm) to micrometer (µm) scale. Electron Microscopes are scientific instruments that use a beam of highly energetic electrons to examine objects on a very fine scale. This examination can yield information about the topography (surface features of an object), morphology (shape and size of the particles making up the object), composition (the elements and compounds that the object is composed of and the relative amounts of them) and crystallographic information (how the atoms are arranged in the object). A scanning electron microscope (SEM) is a type of electron microscope that produces images of a sample by scanning it with a focused beam of electrons. The electrons interact with atoms in the sample, producing various signals that can be detected and that contain information about the sample surface topography and composition. SEM can achieve resolution better than 1 nanometer. The combination of higher magnification, larger depth of focus, greater resolution, and ease of sample observation makes the SEM one of the most heavily used instruments in research areas today.

There is a common practice of using the terms spurious, counterfeit, misbranded, illegal, sub-standard and others interchangeably and this often creates confusion among scientist, industrialist and extension officer. Spurious and counterfeit pesticides are the two major words used to describe all kind of anomalies in the pesticides. Hence, there is a need to have a clear understanding of these and differences between them.

Abstract: Gladiolus, commonly known as ‘sword lily’ is native to South Africa. Most members of genus are heteroploids. It has pivotal place as cut flower with novel phenotypes (Grandifloras, Primulinus, Butterfly, Miniature, Face Ups, Orchideola), cultivars available on world market. Modern types are evolved through conventional breeding and very few through mutation breeding. Their continued popularity has warranted extensive breeding and development of fragrant, winter hardy and disease resistant cultivars. Breeders have reported close linkages in variety of traits. Cross pollinating nature coupled with high heterozygosity makes heredity transmission unpredictable. Future crop idiotypes are proposed to continue transformation of this important crop during the next millennium.