eChapters

INTRODUCTION

The latest Assessment Report (AR-5) of Intergovernmental Panel on Climate Change (IPCC) has concluded that warming of the climate system is unequivocal, and since the 1950s, many of the observed changes are unprecedented over decades to millennia. The report further pointed about the warming of atmosphere and ocean; shrinking of glaciers, sea level rise and more frequent and intense extreme weather events. The most critical information pertains to the increase of the concentrations of greenhouse gases. The report figures that human influence, primarily the burning of fossil fuels, has been the “extremely likely” dominant cause of global warming over the past several decades. Based on the scientific evidences, it is reported “warming by the end of the 21st century will lead to high to very high risk of severe, widespread, and irreversible impacts globally” (Edenhofer et al. 2015).

Introduction
  
Horticultural production can be highly profitable, increase employment opportunities, and bring about increasing commercialization of the rural sector. Horticulture thus has a role to play in a world where 1.1 billion people continue to live in extreme poverty on less than US$1 a day and another 1.6 billion who live between one and two dollars per day (Von Braun et al., 2004). While in past, priority to achieving self sufficiency in food grain production in our country, over the years, horticulture has emerged as an indispensable part of agriculture, offering a wide range of choices to the farmers for crop diversification. It also provides ample opportunities for sustaining large number of agro-industries which generate substantial employment opportunities. The horticulture sector contributes around 28% of the GDP from about 13.08% of the area and 37 % of the total exports of agricultural commodities (Annon, 2007).

Abstract

Modern world is experiencing energy insecurity because of extreme population pressure and depleting energy resources. Fossil fuels though have highly applauded for contributing to today’s development, are non renewable energy and debated for not sustainable. This has posed serious challenges to the scientific fraternity for finding the suitable alternatives. A cheap, eco-friendly, sustainable or renewable type of energy is visualized for development with added advantage of mitigating green house gases.

Lactation is the process of milk secretion by the mammary gland. Milk is one of the most fascinating biological fluid whose role as a nearly complete food in sustaining life processes is well known. Milk provides an essential and highly digestible form of nutrients for the mammalian young during the critical period after birth. Milk also forms the first meal of the mammalian youngs.

Most mammals produce milk according to the requirements for their young one’s. However, man for centuries have selectively bred several animals, so that they produce milk, far in excess of the requirements of their youngs. The excess milk is harvested by man for his own and his children’s nurture. The physiology of the mammary gland or the mechanism of milk secretion forms an important part of the man’s strategy to manipulate it to its own advantage. Milk forms the raw material for the multi million dollar dairy industry all over the world. In India, dairying is the second largest agriculture based industry.

The most important animal domesticated by man for production of milk is undoubtedly the cow. Buffalo as a milk producer is important only in Asia & parts of Africa. In India its importance is as much or even more as compared to the cow in milk production ability. The other important milk producing animals are goat, sheep, camel, yak, and mithun.

The ability to produce milk is dependent on several factors including breed, season, feed etc. Majority of our animals do not conform to any descript type, some 20 per cent of them belong to 26 cattle breeds and 7 buffalo breeds. The major milk producing breed of buffaloes are Murrah and Nili Ravi. The season affects the milk producing ability of domestic animals. In Northern India, cow’s milk production is highest during March and lowest during September. However, the buffalo milk production is highest during October and lowest during June.

Introduction

The act of substituting food or drink with low grade quality ingredients thereby the f inal product will fail to the meet the regulation or standards and in most cases even unfit for human consumption (Augustin et al., 2009). With demand for profit based manufacturing market, there will be increase in points of adulteration with cheaper alternatives or inferior grade ingredients in the production of food or drink (Banti, 2020)]. Adulteration is highly prevails in developing countries such as India, where about 70% of milk supply is adulterated on day to day basis (Bittar et al., 2017). It is every nation and each individual’s responsibility to provide safe and nutritious food to the consumers.

Plant propagation is the science of generating new plants. Basically, in plant kingdom, the plants multiply themselves either asexually or by sexual means. In asexual propagation methods, plants use any of the vegetative part of the plant to produce offspring such as stem, root, buds, etc. The plants thus produced are having exactly the same genetic blueprint as that of the parent plant. However, in the sexual method of propagation, the specialized parts of the plants which have undergone meiosis takes parts such as pollen and ovule to produce seed which on germination produces the plants having characters encoded on its genome. Such plants may have a blend of characters of both the parents. The seed production is a complex phenomenon which takes place after fertilization (Bhatnagar and Johri, 1972).

SUMMARY

Sustainable agricultural development can only be possible, when all agricultural inputs used judicially. Soil management practices, like nutrient management, time schedule of fertilizer application, irrigation management etc. are should be manage in such away that resulted in best remuneration and sustain overall soil health. More over that, soil physical properties like, tilth, aeration and drainage are also play important role in soil productivity, so tillage operation should be carry out at proper  level of soil moisture condition to maintain good soil tilth which result in better soil environment for high crop yield. The most important factor in sustainable soil management for agricultural development is nutrient management and it's only possible through integration. So nutrient management through integrated approaches, like use of chemical fertilizer is decreases by integrating with organic manures, biofertilizer, green manure, neem cake, caster cake etc which resulted in sustainable crop production and good soil health on long-term basis.

3.1 Communicating to the Customers

Philip Kotler defined IMC as, “the concept under which a company carefully integrates and coordinates its many communications channels to deliver a clear, consistent message”.

The Marketing Communications Mix consist of eight Major modes of communications which includes advertising, Sales Promotion, Events and Experience, Public relations and Publicity, Direct marketing, Interactive Marketing, Word of mouth Marketing and personal selling.

The analytical work in a soil-testing laboratory mainly involves standard chemical methods, suitably modified to permit handling of a large number of soil samples with the required degree of accuracy and speed. Many of the analytical operations are carried out more conveniently with help of common as well as sophisticated instruments.

The various instrumental measurements followed in soil and water-testing work in the laboratory can be broadly divided into two groups:

1) Determination of pH and electrical conductivity

2) Colorimetric, spectrophotometric

General Terminologies in Livestock Production

Developmental Anomalies

Persistent right aortic arch

This is a developmental anomaly of aorta in which the aorta develops from right arch present on right side of trachea and oesophagus. The ductus arteriosus forms a ring around trachea and oesophagus by connecting aorta and pulmonary artery. This ring causes partial obstruction of trachea and/or oesophagus.

Patent ductus arteriosus

The ductus arteriosus is a short blood vessel which connects pulmonary artery to aorta in foetal life for diversion of blood. Normally, soon after birth this duct is sealed and remains in the form of a ligamentum arteriosum. But sometimes this ductus arteriosus remains open and blood is continuously shunted between aorta and pulmonary artery, after leading to congestive heart failure, pulmonary hypertension and cyanosis due to mixing of venous and arterial blood (Fig. 3.1).

Introduction
Drying is probably the oldest method of food preservation used for agricultural crops, including food grains, oilseeds, spices, as well as fruit and vegetables. Drying refers to the removal of moisture content from the food to a level at which the activities of food spoilage micro-organisms are inhibited. Therefore, the reduction in water activity of the food as a result of moisture removal is themain principle of preservation by drying. Two commonly used terms for dried foods include low-moisture foods and intermediate moisture foods (IMF). Dried foods or low-moisture foods generally do not contain more than 25% moisture and have a water activity (aw) in the range of 0 to 0.6. Intermediate moisture (IMF) foods on the other hand contain 15- 50% moisture with a water activity (aw) of 0.60 -0.85. Dried grapes (raisins and munacca), apricots, dates, Morchella (Guchhi), bael, chilli, figs, etc. are commercial products prepared by using drying. However, the temperature used for drying is usually insufficient to cause the killing of microorganisms and enzymes, therefore any increase in moisture content during storage due to faulty packaging can also spoil the product. Thus, greater care is required for the packaging and storage of dried products.

Abstract

Cancer is a potent disease causing nearly 6 million deaths per year worldwide. There are a number of cancers such as skin, brain, lung, breast, stomach, colon and blood cancer caused due to number of factors like unbalancing of hormones, smoking etc. Cancer could be treated by chemotherapies or through irradiation therapies.

Meat is considered as well balanced diet because it is good source of macro and micro nutrients.

Macronutrients-required in large quantity in body i.e proteins, fat and carbohydrates.

Micronutrients-required in lesser quantity by human body i.e vitamins, minerals and fibers.

Organ meat like liver is a good source of glycogen, viatm-A, B1 and nicotinic acid.

Fresh meat is unprocessed.

Raw meat is a fresh meat undergone chilling and freezing.

Refrigeration and rapid cooling can delay the onset of rigor mortis

Insecticide use for agriculture has increased along with food quality and quantity, but self-harm has also increased. Despite a high rate of insecticide poisoning and sometimes usage for homicide, little is known about insecticide management.

Insecticide poisoning kills up to 300,000 people around the world every year. According to hospital admission data, most estimates of insecticide poisoning in the short term have been based on numbers of people poisoned by insecticide s. This represents only a small part of the real number, as it includes only the most dangerous cases. IS 4015 is a standard guide for handling cases of pesticide poisoning.

A neurological examination is an advanced and specialized clinical examination that is performed when there is suspicion of potential nervous system involvement. Before performing neurological examination a detailed history is essential. Neurological examination along with history not only helps in confirming whether the neurological problem is of primary or secondary origin but also aids in accurately identifying the location of the lesion. Common Terminology used in Neurology The following terms are commonly used in neurology. For a better understanding, common neurological terms with their definition are given below: •     Ataxia - An abnormal gait marked by lack of coordination, but without spasticity, weakness, or involuntary movements. Ataxia results from damage to the proprioceptive pathways, the vestibular system, or the cerebellum.

INTRODUCTION

The chrysanthemum is one of the most beautiful and perhaps the oldest flowering plant, commercially grown in different parts of the world. It is commonly known as Queen of East, Autumn Queen and Guldaudi. It is im ortant both as cut flower and as potted plant in the international market. In Dutch cut flower auction, chrysanthemum ranks second after rose. It is preferred practically due to vast range of shapes and sizes of flowers, brilliance of colour tones, long lasting floret life, diversity of height and growth habit of the plant, exceptionally hardy nature, relative ease to grow all the year round and versatility of use.

It is one of the most important traditional flowers of India mainly used as a potted plant, loose flower, cut flower and as border plant in the garden. Chrysanthemum cinerariifolium inflorescences are of considerable importance in the manufacture of pyrethrin insecticides. The leaves of Chrysanthemum balsamita become leathery on drying and can be used as bookmarks. Fresh young customary leaves can be used in salads and to add a balsam flavour in beer, soups and bread. Now programmed blooming of chrysanthemum all the year around is possible by environmental manipulations.

Understanding biology and genetics at molecular level has become very important for better understanding and manipulation of genome architecture and this creates new opportunities to streamline plant breeding. Breeding is simply defined as the selective mating of individuals of a population to isolate or combine desired morphological, physiological or genetic traits such as appearance, yield, and disease resistance. This is performed with the assistance of identifiable traits.

Molecular markers have contributed significantly in this respect and have been widely used in plant science in a number of ways, including genetic fingerprinting, diagnostics, identification of duplicates and selecting core collections, determination of genetic distances, genome analysis, identification of markers associated with desirable breeding traits which are useful in marker assisted breeding, genomics and development of transgenics. Use of these markers also significantly reduces breeding time and cycles required for crop improvement. This is reflected in the fact that complete molecular and genetic maps have now been constructed for at least 20 major crop species and many more have been characterized at less defined level and the genomes of a few model plant species were completely sequenced.

Introduction

Drip irrigation is an efficient method of application of water at the plant bottom at a rate nearly equal to the consumptive use rate of the plant, thereby minimizing the conventional water losses like percolation, runoff and evaporation from soil. It is a process of slow application of water on, above or beneath the soil by the surface, sub-surface, bubbler, and spray or pulse system. Fertilizer can also be applied with the drip water. Emitters or applicators are placed closed to the plants and used to spray water in the form of drops, tiny streams or miniature spray. In the drip system water applied from the point source advances in all direction in the soil outward from the source. Drip irrigation is essentially a low rate, low pressure, frequent and long duration application of water in plants root zone area.

Drip irrigation is also called as localized irrigation, trickle irrigation, daily f low irrigation, diurnal irrigation, drop irrigation, sip irrigation, and micro irrigation. A particular name is being popularized in any area depending on the choice of the people of that area. The International Commission for Irrigation and Drainage (ICID) has recommended the term micro-irrigation while the American Society of Agricultural Engineers (ASAE) has preferred drip irrigation. In India it is told as drip irrigation.

Modern plant genomics generates highly complex and high-dimensional datasets that require advanced computational approaches for effective analysis. This chapter explores the application of artificial intelligence to plant genomic data analysis. Machine learning and deep learning techniques are discussed for identifying complex patterns, classifying genomic information, predicting phenotypes and supporting genomic selection. Convolutional neural networks, long short-term memory networks and transformer models are considered for analyzing genomic sequences and relationships. The chapter presents an AI-based framework integrating data processing, model development and prediction while highlighting the challenges associated with genomic data heterogeneity and dimensionality. It emphasizes the potential of AI for improving genomic research and plant improvement strategies