eChapters

A variety of glassware like burettes, pipettes, measuring cylinders, flasks, separating funnel etc. are used for experimental purposes in a laboratory. All of these need to be used and handled correctly, otherwise the chances of experimental error and damage to the glassware increase significantly. Being made of glass, they need special care while washing and using in experiments because even a minor mistake in handling of glassware may result in breakage of the apparatus. With this precautionary note, let us discuss about some of the specific glassware used in the laboratories.

Burette

Burette is a long graduated glass tube with a stopcock at one end for delivering a known/desired volume of a liquid, especially in titration experiments. It contains a stopcock at the lower end and a tapered capillary tube as the stopcock’s outlet. The flow rate of liquid from the tub stopcock’s outlet can be controlled with the help of stopcock valve. Burette is used for measuring the volume of a solution/chemical added in a quantitative (titrimetric) estimation experiment.

Procedure of using a Burette

The burette reading must be noted before and after delivering the chemical/ solution from the burette. The difference in these two readings is the volume of the chemical/solution released out of the burette. The solution should be released slowly/drop-by-drop to avoid any experimental error/mistake. If the solution/chemical is allowed to pour out too fast, the wall of the burette will not drain properly and some liquid may remain sticking to the surface of the walls. Moreover, excessive amount of chemical may be released/dropped during the experiment, particularly during the titration experiment wherein we need to know the exact amount of acid/base needed to get neutralization point. Thus, any minor mistake may lead to get a faulty reading. The measuring capacity of a burette usually used in a laboratory is 50 mL.

For most of the past 50 years world food production has outpaced rising demand. World population has doubled since World War II, whereas food production has tripled. In the developing world the calories available per person per day increased from an average of 1,925 calories in 1961 to 2,540 in 1992. World food production has expanded due to the Green Revolution—adoption of crop rotation, the mass production and use of petroleum-based fertilizers and chemical pesticides, expanded irrigation, and the introduction of genetically superior, disease-resistant cultivars. The trend may now be changing for the worse, however. Since about 1990 global grain production has risen only slightly and, despite slower rates of population growth, grain supplies per capita have fallen. In the worst case, Africa now produces nearly 30% less food per person than it did in 1967. As per FAO estimates, world food production would have to double to provide food security for the 8 billion people projected for 2025. By 2050, when world population is projected to be over 9 billion, the situation would be even more challenging.

Cultivation of citrus holds promise in arid irrigated tracts. The major citrus fruits under cultivation in arid regions are acid lime , lemon, Kinnow, Mandarin hybrid, sweet orange and grapefruit .Acid lime and kinnow are widely grown. Citrus fruit are grown  through out country for its  nutritive and medicinal value (Chadha, 2001) . Citrus is world’s leading fruit crop. In India, it is cultivated in the states of Maharashtra, A.P., Punjab, Rajasthan, H.P., U.P., M.P., Karnataka, T.N., J&K., Odisha, Gujarat, Assam, & Sikkim, For obtaining quality plant material, propagation is an important aspect. Citrus is largely propagated   by budding except kagzi lime which is raised from seeds because of occurrence of polyembryony and sweet lime which is  commercially  propagated by stem cuttings. Kagzi lime and lemon can also be propagated by layering. In case of citrus the availability of proper plant material is very much essential.

Extension

Extension is that type of education which is stretched out to people in rural areas far and near, beyond the limits of education institutions to which the formal type of education is usually confined.

Education

Education is a process of bringing about desirable changes in the behaviour of human being.

Formal education: The hierarchically structured, chronologically graded ‘education system’, running from primary school through the university and including, in addition to general academic studies, a variety of specialised programmes and institutions for full-time technical and professional training.

Informal education: The truly lifelong process whereby every individual acquires attitudes, values, skills and knowledge from daily experience and the educative influences and resources in his or her environment - from family and neighbours, from work and play, from the market place, the library and the mass media.

Non-formal education: Any organised educational activity outside the established formal system - whether operating separately or as an important feature of some broader activity - that is intended to serve identifiable learning clientele and learning objectives.

Meteorology is derived from the Greek word meteoro which means above the earth’s surface; i.e., the atmosphere. The state of the atmosphere experienced at a given time, in any location on the surface of the earth is known as weather. Thus meteorology is the scientific study of the atmosphere or the weather. It is a branch of physics dealing with atmosphere and it is often quoted as the ‘physics of the lower atmosphere’. The main focus of meteorology is to understand the weather processes and forecast the weather. Solar radiation, the air mass and moisture are the three key ingredients that make up weather. The exchange of heat, moisture and momentum between the earth’s surface and the atmosphere determines the characteristic of weather. The observable weather events are known as meteorological phenomena and are defined by a set of variables called weather elements. Atmospheric temperature, atmospheric pressure, humidity, precipitation, cloudiness, wind and visibility, etc. are examples of such weather elements. The weather elements are not separate entities. They are closely related with each other and are highly variable in nature. Meteorology explains and analyses the changes of these weather elements.

Meteorology

The major subdivisions of meteorology are dynamic meteorology (or atmospheric dynamics) and physical meteorology (or atmospheric physics). The dynamic meteorology is concerned with the analysis and interpretation of the three-dimensional, time-varying, macro scale motions and energy transformations in the atmosphere. The science of dynamic meteorology is meant to develop models based on the hydrodynamic and thermodynamic equations. The physical meteorology is concerned with the processes that alter the physical properties and the chemical composition of air parcels as they move through the atmosphere.

5.1. Determination of Soil Moisture

5.1.1. Determination of Soil Moisture Content by Gravimetric Method (Direct method)

Traditionally water content in soil is expressed as the ratio of the weight of water present in the soil to the weight of dry soil. When this ratio is multiplied by 100, it becomes the percentage of water in the soil sample on dry weight basis.

Abstract

Seed priming is the innovative way of ensuring optimum germination and plant stand under moisture deficit situations. It enables the seed to tide over initial stress from biotic and abiotic factors. Higher yield with better quality seed are reported. The seeds of agronomic and horticultural crops are significantly affected by ageing and deterioration. Reversal or rejuvenation of aged seeds is therefore of primary interest. Experiments related to reversal of seed deterioration effects due to ageing relying heavily on accelerated ageing (AA) of seeds and their priming using various priming agents especially osmotic substances. Repair during germination is a hypothetical event supported by some investigators and questioned by others. Repair includes the spontaneous reorganization of plasma membrane phospholipids, which occurs during seed hydration. Alternatively or additionally, metabolic repair might occur. Experimental evidence for repair in imbibed seeds has been elusive. Priming reduced electrolyte leakage as well as lipid peroxidation in seeds implying the activation of membrane repair processes. Priming was also associated with increased levels of antioxidants like ascorbic acid and tocopherols particularly the latter and the activities of enzymes SOD, CAT POX involved in the mitigation of oxidative damage. In comparison with the priming of unaged seeds, the aged seeds experienced a diminution of response in terms of changes in the levels of antioxidants and scavenging enzymes. Thus, seed priming technique under climate extremities seems the best and economical means to sustain higher crop yields. The technique needs to be popularized among the farmers practicing agriculture and horticulture under rainfed situation so as to sustain production under climatic adversaries and enhance livelihood security and more profitability at the farm.

Food processing sector in India has largest segment of bakery with more than 1.3 million tonnes of production from organized sector and 1.7 million tons from 1,000,000 unorganized sectors. India is second largest producer of biscuits globally. Our bakery industry is positioned third in generation of revenues among processed food sector.

Climate-resilient agriculture involves the use of practices, technologies, and approaches that can help to reduce the risks associated with climate change, while also promoting sustainable agriculture and improving the livelihoods of farmers and rural communities. This can include a range of strategies, such as the use of climate-tolerant crop and animal varieties, agroforestry practices, conservation agriculture, and integrated water management. Climate-resilient agriculture can also involve the use of innovative technologies, such as precision agriculture, drones, and satellite imaging, to support decision-making and improve the efficiency of agricultural systems. This chapter outlines the principles and priorities for climate-resilient agriculture, with a focus on the key strategies and approaches that can help to promote sustainable agriculture and reduce the vulnerability of agricultural systems to climate change. The chapter draws on examples and case studies from around the world, highlighting the importance of adopting a holistic and integrated approach to climate-resilient agriculture that takes into account the social, economic, and environmental dimensions of sustainable agriculture. By outlining the principles and priorities for climate-resilient agriculture (Fig. 5.1), this chapter aims to provide a framework for policymakers, practitioners, and other stakeholders to promote sustainable agriculture and reduce the vulnerability of agricultural systems to climate change

1.0 INTRODUCTION

Vanilla is one of the most popular and widely used flavour materials in the world and it is the most expensive spice traded in the global market after Saffron (Crocus sativus L). The major consumers of vanilla beans currently are the developed countries with the US, France and Germany absorbing about 80 per cent of the world imports. Among them, the US imports 50-60 per cent while the latter 10-15 per cent each. They are also main re-exporters of both vanilla beans and processed products. The total area under vanilla cultivation in the world during 2002 was 38,066 ha with the production of around 4956 metric tones and increased to 76,440 ha with a production of 10, 360 tons during 2005 (FAO, 2007). The major vanilla producing countries are Madagascar, Comoros, Indonesia, Mexico and Reunion (Table 1). Area under vanilla in India during 2002-03 was 2545 ha with the production of 92 tonnes. (Spices Board, 2003) and increased to 5370 ha with a production of 196 tonnes during 2004-05.

The problem of insect-pest, disease and weed is acute in case of all the crops and especially so in case of commercial crops. Pesticides, fungicides or chemicals are meant to control harmful pests such as insects, nematodes, diseases, weeds etc. However, excessive use of pesticides, fungicides and herbicides not only leave residues in soil, water and air but also have adverse effects on the non-target organisms such as pollinators, parasitoids, predators and wild animals. This has adversely affected the ecological balance resulting in pest resurgence, development of resistance in the pest species, diseases and environmental pollution.

Current Status of Seed Production

Organized seed production in India became possible with the formation of National Seed Corporation (NSC) during 1963, which paved the way for a sound seed industry to come as a consequence of the introduction of hybrid technology during 1961-65. The release of high yielding dwarf varieties of wheat and rice by the 1960’s gave further impetus to the growth of the seed industry in the country. For the total area under cultivation of 26.7 m ha and 65 per cent of the area) insect, disease and weeds (10-40 per cent loss) and also poor shelf-life. Hybrid technology have defined solution in several crop plants specially vegetables, cotton, rice etc. with the development of appropriate hybridization and seed production. In 1990-91, the area planted to ‘bought seed’ was about 10.35 per cent. The total ‘bought seed’ was estimated at around 5.91 lakh tonnes valued at Rs 679.80 crores. 

Fº value: It is used to express F-value when z =10ºC / 18ºF and the temperature is 121.1ºC. It is the number of minutes at a specific temperature (250ºC) required to destroy or kill a stated number of microorganisms and has specific z-value. It is also called reference value. 

A world view of Transportation system of renowned urban centers

While discussing urban regeneration and observing cities, it is impossible to overlook the importance of the transportation system and its impact on the urban form of a city. For example, if one observes a typical industrial city plan, one would notice that radial corridors of development generated from the city core stand out in contrast to the intricate detailing of vehicular roads added later on in due course of time.

The increase in vehicular traffic brings in new patterns of fast moving lanes. To clear the congestion created by ever increasing number of motor cars, larger cities need new road patterns and parking spaces, even public transportation needs new interventions and congestion of buses gives way to systems like mass rapid rail

Introduction

People visit tourist destinations for the purpose of enjoying the beauty, to relax and rejuvenate. One of the popular destinations chosen by all are hill stations. Darjeeling, also known as the Queen of Hills, is a popular tourist destination visited by six-hundred-thousand Indians and thirty-thousand foreigners annually (Bhattacharya, n.d.). The primary attractions that make Darjeeling worth visiting are the magnificent views of the Kanchenjunga range and the lush tea gardens. As a result of the advancement in technology, the luxury of travel is now feasible to all sections of society because of which tourism in India has rapidly expanded in the past three decades. This is the result of: great progress and advancement of the Indian economy, India’s roaring IT sector and promotion of “Unbelievable India” by the Tourism Ministry. Although tourism has significantly boosted revenue and employment, it comes with its downsides: the harm that it poses to the environment if it goes unchecked. Since the number of tourists is greater than the ability of the environment to cope up with, it puts tremendous pressure upon the environment which can have irreversible negative impacts

Introduction

Lipids (dietary or body reserve) serves as the major source of energy for the body at the time of carbohydrate depletion. Triacyl glycerol (TG) forms the major part of lipids alongwith phospholipids, cholesterol and fat-soluble vitamins. The different forms of lipids are utilised by the body for generation of energy in the form of ATP. In addition, it serves as the source of essential fattyacids and vitamins for different metabolic purpose.

Dietary triacylglycerols (TG) are digested by lipase group of enzymes (lingual, gastric, pancreatic and intestinal) secreted by the digestive tract into free fatty acids and 2-monoacylglycerols. The 2-monoacylglycerols are either absorbed as such or hydrolysed into glycerol and fatty acids which are then absorbed independently. The glycerol and fatty acids are distributed to different tissues through circulation and utilised in the following ways

i. Storage in fat cells of adipose tissue in the form of triacylglycerols.

ii. Oxidised in peripheral tissues for production of energy.

iii. converted to glucose in hepatic cells in the process of gluconeogenesis.

iv. Synthesis of other derived compounds like steroids and eicosanoids in gonadal and other tissues

v. Synthesis of phospholipids and cholesteryl esters.

The basic aim of seed legislation and its subsequent enforcement is to regulate the quality of seeds sold to farmers. So long as Agriculture remains tradition and static, there is little justification for regulating seed quality. However with technological advancement and the systematic application of science to Agriculture, it becomes compulsory to regulate the quality of seeds through seed legislation and its subsequent enforcement to ensure that seed buyers are not made to run undue risks.

TYPES OF SEED LEGISLATION

Seed legislation can be broadly divided into two groups.

1.    Sanctioning legislation

2.    Control legislation

Sanctioning Legislation

Which authorizes, establishes or otherwise legally sanctions such activities as formation/establishment of advisory bodies, seed certification agencies, seed testing Labouratories, foundation and certified seed programmes, recognition of seed certification agencies of foreign countries, appellate authority etc.

INTRODUCTION

Insects are the major group of arthropods and the most diverse group of animals across the Earth. Though some of them are beneficial to environment and to humans, many insects are considered as pests as they transmit diseases and damage the crops and forests. Chemical, biological, cultural and mechanical methods are being used to eradicate, control or manage these pests. The main strategy used for controlling pests has been the use of chemical pesticides because of their long residual action and wide spectrum toxicity (Casida and Quistad, 1998). However, the indiscriminate usage of chemical pesticides are toxic to mammals, birds and fish, also pollute the environment, besides the development of pest resistance and the emergence of secondary recalcitrant insect pest populations (Li et al., 2007). These negative impacts prompted the change of strategies in managing the pests by resorting to ecofriendly and cost effective pest control strategies (Ferre et al., 1991). 

Breeding methods for vegetable crops are basically similar to those adopted in others like cereals, oilseeds or pulses. Certain aspects, peculiar to vegetables, however, require specific attention: (i) In many cases, the edible part of the plant is not the seed (as cauliflower, cabbage, carrot and onion) and hence while breeding for improved plant part that is used as vegetable, its seed production capacity needs due consideration, (ii) Vegetables like tomato, garden pea and onion are consumed in different forms (fresh or processed) and the end use of the product (like processing quality) has to be taken into account in breeding programmes, (iii) Consumer preferences (as for example in eggplant) size, colour and shape of the vegetable has to be given due emphasis, (iv) Being perishable in nature, keeping quality and suitability for long distance transportation are important attributes in vegetable crops unlike grain crops where bulk handling and haulage can be mechanised, (v) Another peculiarity with vegetable crops is that they vary widely in modes of reproduction necessitating appropriate choice of breeding methods. In addition to vegetatively propagated crops like potato, sweet potato, cassava (tapioca), garlic, pointed gourd or “Parwal (Trichosanthes dioica L.) and ivy gourd or ‘Kundru’ (Coccinia cordifolia L.), there are many seed propagated vegetable crops which are auto- or allogamous or intermediate (Table 1).

Within these broad groups, variations in the extent of cross- or self-pollination, namely, 15-20 per cent natural cross-pollination in chillies and 20-25 per cent natural self-pollination in muskmelon have been recorded.