eChapters

Introduction

Robotics is a branch of engineering and science that deals with robot design, construction, operation, and uses. A robot is a machine that is capable of carrying out a complex series of actions autonomously or semi-autonomously, typically programmed by computer software or controlled by remote operators. Robotics technology combines various disciplines such as mechanical engineering, electrical engineering, and computer science to create machines that can interact with the physical world and perform tasks that would otherwise be difficult or impossible for humans to accomplish. The term "robot" was initially brought to public attention by Karel Capek, a Czech writer, in his play Rossum's Universal Robots, which was published in 1920.

1. Introduction

Man (Homo sapiens) since his appearance on the sylvan Blue Planet started his search for healthcare and beautycare, besides food and shelter. Eventually, he also became conscious about his mind and attempted at ‘mindcare’. He employed leaves, flowers, fruits, etc. or some plant products altering his mind to remain aloof from his heavy worldly affairs, stress or even incurable diseases. He also endeavoured to use plants for his amusement. He exerted more pressure on local biodiversity, modified his study and observations on biodiversity which resulted into ‘cultural biodiversity’. He intensified his method of ‘trial and errors’ to search new sources or biodynamic chemicals. In recent times, he is emphasizing value-addition of the products in hand for his welfare. After food, medicine was his next priority to sustain life in primitive societies. Naturally, his study and research laid emphasis more on food and medicine in comparison to mind-altering bioresources. Even the modern man also paid more attention on the former rather that the latter. These trends have perforce led in partial negligence of research for psychoactive plants in his ambience. The present author, therefore, extended efforts to prepare an inventory of the mind-altering vis-à-vis psychoactive plants in the state of Maharashtra.

Neural suitcase determines the size of our world.

We think. We imagine. We generate ideas. We make sense of things. We take decisions. We observe patterns, and then try to understand their significance. Our neural suitcase does all this. It tells us the tales of many minds (1). The tales are beautiful, vulnerable, quiet, chaotic, real, fictional, wise, foolish, friendly, hateful, meaningful, and blind. Our neural suitcase builds castles in the air. It determines the size of our world.

CALCIUM & PHOSPHORUS

Source of mineral

Soluble grits (Limestone grits containing chiefly CaCo3) which is soluble in acid medium of crop. It differs from insoluble grits (gravel, granites, sand etc.) which acts only mechanically in the gizzard.

ABSTRACT

Mineral exploration is not only highly imaginative and creative but a very costly activity as well. The fast emerging Geomatics technology is a real boon in mineral exploration as it encompasses a whole spectrum of solutions and services which are of great help for exploration geologists. Geological maps which generally form the basic requirement for any kind of natural resources inventory operations currently witness tremendous changes and the same is mainly attributed to the integration of Geomatics technology. Usage of Geomatics has revolutionized the art of mineral exploration as geological maps can be easily integrated with other important details like geomorphology, structure and tectonic pattern, geophysical data etc. This kind of data integration facilitates for the better identification of mineralized zones. In addition, GIS with its powerful analyzing capability provides tools at several stages in the process of mapping for building up a database containing various types of data for quantifying and extracting features related to mineralization. The present paper narrates an overview of mineral exploration using Geomatics technology.

Summary

Fertilizers are materials when applied replenish lost soil nutrients on farmer’s field. Without the use of fertilizers farmers would find it extremely difficult to increase their production to meet the ever-growing mouths. The purpose of this session is to discuss what a fertilizer is, and the different terminologies used in fertilizer technology.

PLANT NUTRITION

Plants use inorganic minerals for nutrition, whether grown in the field or in a container. Complex interactions involving weathering of rock minerals, decaying organic matter, animals, and microbes take place to form inorganic minerals in soil. Roots absorb mineral nutrients as ions in soil water. Many factors influence nutrient uptake for plants. Ions can be readily available to roots or could be “tied up” by other elements or the soil itself. Soil too high in pH (alkaline) or too low (acid) makes minerals unavailable to plants.

The living organisms in the terrestrial ecosystem have unique characteristics of taking up the substances from atmosphere and soil for the synthesis of their own cellular component or as a source of energy. The supply and absorption of chemical compounds required for the growth and metabolism of the organisms may be defined as nutrition and the compounds required by them are called nutrients. The process by which the nutrients are converted to cellular material is known as the metabolism. Out of 118 chemical elements so far detected in the modern periodic table, 92 elements from hydrogen to uranium are naturally occurring, a large portion (more than sixty) of such have been detected in the plant tissues. But, the elements which take part in the nutritional requirement and metabolic processes of the plant are said to be essential elements, others which do not participate in such processes are considered non-essential.

Introduction
A mineral is a naturally occurring substance that possesses distinct physical qualities and a specific chemical makeup. An ore is a mineral or group of minerals that can be used to extract a useful substance, such a metal, and use that substance to makeother useful commodities. In  the crust of the earth, minerals are created over millions of years. These nonrenewable resources are crucial to the advancement of modern civilization. India’s mineral resources are confined to a small number of places and are unevenly distributed. The Chotta Nagpur Plateau region contains almost 90% of our mineral riches. Mining is the procedure used to extract minerals from the earth.
Mining Activities Move Through Four Phases
Mining Procedure
Mining activities move through four phases:
a) Prospecting: Mineral exploration
b) Exploration: Determining the deposit is dimensions, form, location, and economic worth.
c) Development: The process of making the deposit accessible so that minerals can be taken out of it.
d) Exploitation: Mining the minerals and taking them out.

19. PHYSICAL PROPERTIES OF MINERALS

Def : The minerals are naturally occurring solid bodies having definite chemical composition and certain atomic arrangement, and are formed by inorganic processes in the nature.

All the minerals possess certain physical properties which are considered as follows.

1.Characters depending upon light such as colour streak, luster, transparency, translucency, phosphorescence and fluorescence.

2.Characters depending upon certain senses such as taste, odour and feel.

3.Characters depending upon the atomic structure and state of aggregation such as form, hardness, tenacity, fracture, cleavage and surface tension effects.

On the basis of these three characteristics, the minerals are identified and distinguished.

The earth's crust is made up of minerals and rocks. Minerals are inorganic substances with a definite chemical composition, whereas rocks are mixture or aggregates of minerals. Each mineral is composed of certain elements present in fixed proportion. For example, mineral quartz, SiO₂ is a compound of the elements silicon (Si) and oxygen (O) combined in the proportion of 1:2, so its chemical formula is SiO₂, whereas rock granite is a mixture of several minerals like quartz, feldspar etc. Nature has provided unique physical properties to different minerals that can be used to identify them.

4.1 Physical Properties of Minerals

Majority of minerals contain following properties that can be used to identify them in field and in laboratory: crystal habit, cleavage, hardness, density, luster, streak, color, tenacity, magnetism, and taste.

4.1.1 Crystal habit

The faces that develop on a crystal depend on the space available for the crystals to grow. If crystals grow into one another or in a restricted environment, it is possible that no well-formed crystal faces will be developed. However, crystals sometimes develop certain forms more commonly than others, although the symmetry may not be readily apparent from these common forms. The term used to describe general shape of a crystal is habit.

Some common crystal habits are as follows:

A. Answer the following questions

1.    Why deficiency of potassium in livestock is very rare?

Ans: The potassium uptake by plants is about 10 times more than sodium. So, deficiency of potassiumin livestock is veryrare.

2.    HowZn helpsin vitamin Autilization?

Ans: Zn is a component of alcohol dehydrogenase which has a significant role in converting retinol to retinaldehyde or vice versa foreye vision, reproductionandutilization of Vitamin A

3.    What is parakeratosis?

Ans: This is a Zn deficiency disease in pig characterized by hyper keratinisation, thickening and reddening of skin followed by eruption and scab formation giving an appearance of mange.

4.    Why ruminant have additional requirement of vitamin B12? Ans: Theruminants have an additional requirementfor thevitamin B₁₂ because of itsinvolvementin themetabolismof propionic acid.

5.    Why perosis is also called as slipped tendon?

There are six major classes of nutrients: carbohydrates, fats, fibre, proteins, minerals and vitamins. Water is not a nutrient but play important role in livestock industry. These nutrient classes can be categorized as either macronutrients (needed in relatively large amounts) or micronutrients (needed in smaller quantities). The macronutrients are carbohydrates, fats, fiber, and proteins. The micronutrients are minerals and vitamins.

The term minerals is used by nutritionists to refer to inorganic chemical elements, but is used by many other scientists to mean a homogeneous crystalline compounds. Mineral elements are not inert materials. Mineral elements may change valence states and are transferred from one chemical compound to another. Minerals are active participants in enzymatic reactions, have specificity of function, and are critical to life.

Minerals are the building blocks of the earth’s crust. Derived inorganically, either as chemical elements or more often as chemical compounds, minerals are essentially solid. Minerals often form crystals, while aggregate of minerals constitute a rock. Mineralogy is the discipline devoted to the study of minerals including their formation, occurrence, properties, composition and classification . Needless to say, the subject of mineralogy is the foundation of crystallography, petrology and other branches of geology.

Section A dealing with Minerals comprises nine chapters. Chapter I presents salient features of the earth including composition. and structure of the crust mantle and core. Chapter II presents their categories and the how minerals derive their names. Since minerals are essentially a combination of atoms and molecules the significance of chapter III which deals with crystal chemistry cannot be over emphasized.. Chapter IV and V deal with physical and optical properties of minerals which are crucial in identifying them in hand specimens and under the polarising microscope. Classification of minerals and their occurrence is dealt in a general way in chapter VI while descriptive mineralogy is presented in Chapters VII ( Silicate Mnerals) and VIII ( Non-Silicate Mnerals). Minerals are no doubt a subject of serious scientific curiosity but ultimately their use to man is by far the most important theme. Chapter IX therefore is devoted exclusively to different uses that are minerals are put to. The chapter ends with eye opening information as to the quantum of minerals that man uses, taking one of the most industrialized nation USA as an example.

Mineral

A mineral is defined as “a natural substance, usually inorganic, having a definite chemical composition and commonly a definite molecular arrangement which is usually expressed in geometric form”.

1. Aquarium/Under water garden

It is a glass enclosed controlled environment place for growing small tropical plants under water along with or without ornamental fishes.

It can be landscaped with artistically designed wood, stones, oyster shell, lime free coarse sand, etc.

If such aquarium contains fishes, then timely feed must be given to fish.

Plant species suitable for it are Alternanthera, Aponogeton crispus, Azolla, Cabomba caroliniana, Nymphaea, Sagittaria, Vallisneria gigantean, etc.

10.1. Preservation through canning

• Process of sealing food stuffs hermetically in containers and sterilizing them by heat for long storage

• In 1804, Appert in France invented this process.

• Also known as appertizing.

• Saddington in England - First to describe a method of canning of foods in 1807.

• In 1810, Peter Durand obtained first British Patent on canning of foods in tin containers.

• In 1817, William Underwood introduced canning of fruits on commercial scale in U.S.A.

• Fruits and vegetables are canned in season when raw material is available in surplus.

• Canned products are sold in off season for better returns to grower.

10.1.1. Principles and process of canning

INTRODUCTION

Fruits and vegetables are historically important constituents of human diet and the growing awareness of consumers about the beneficial effects of these commodities could result in enhancement of global trade involving fresh and processed fruits and vegetables. Emergence of postharvest handling of fresh fruits and vegetables facilitated global trade of these commodities. The developed countries started realizing the export potential of these commodities by development of adequate value addition in terms of pretreatments, shelf life extension and packaging besides grading and other associated packing house operations. However, the trade concerning fresh fruits and vegetables could never come out completely from problems related to pesticidal residues, spoilage, bulkiness of the commodities involving transportation of inedible portions and excessive packaging costs arising out of bulkiness. The other problems associated with fresh produce include mandatory requirement of specific storage temperatures with refrigeration as the primary means of regulation of metabolic rate.

Minimally processed fruits and vegetables are products that have the attributes of convenience and fresh like quality. Their forms vary widely, depending on nature of unprocessed commodity and how it is normally consumed. In many cases, minimally processed product is raw and cells of tissues are alive, but these characteristics are  not regarded as essential. It is important that products have fresh-like character, regardless of   state of cells.  Minimally processed products for both retail and food service applications have increasingly appeared in market place recently.  In coming years, it is commonly perceived that this industry will have unprecedented growth.

1. INTRODUCTION

In recent years, fruit and vegetable consumption has grown rapidly. Today’s society is characterized by an increasing health consciousness and growing interest in the role of food for maintaining and improving human well-being and consumer health. Due to consumer’s profile being ‘‘rich in cash/poor in time’’, there is a demand for ready-to-eat products As a result of changes in consumer attitudes, the market of minimally processed (MP) fruits and vegetables has grown rapidly. In addition to their nutritional and sensory properties, foods are currently recognized as active and protective agents. Among the others, minimally processed products stand out as convenient novel foods that fit the many needs of a modern lifestyle as they combine technical content with an innovative food concept. Fresh fruits and vegetables are an essential component of a healthy diet, able to decrease the risk of cardiovascular diseases and cancer. Their consumption has continued to grow rapidly, linked to the increased public awareness of their health benefits.

Minimal Processing’ (MP) is a concept describing approaches to food safety and preservation that are designed to retain the natural and as-fresh properties of foods. Minimally processed fruits are new forms of product marketing, intended to meet the consumers’ desires for convenience and fresh-like quality. Minimally processed fruits and vegetables, also called ready-to-use, fresh-cut or pre-cut produce, are raw fruits and vegetables that have been washed, peeled, sliced, chopped or shredded into 100% usable product that is bagged or packaged to offer to the consumers high nutrition, convenience, and flavour while still maintaining its freshness.

Introduction

In this modern era, educated and health-conscious people are increasingly demanding such food products that preserve their nutritional value, retain a natural and fresh colour, flavour and texture, and free from chemical preservatives. Besides, urbanization has extensively affected the life-style of people all over the world. Competition has made their life extremely busy and time has become a very important factor. Hence, recently there has been increase in demand for ready-to-cook or ready-to-use fresh food products of fruits and vegetables along with convenience and safety. This new demand by consumers has opened a new avenue of food preservation known as minimal processing. The products prepared by this processing method are known as fresh cut or pre-pared products. Minimally processed products are also known as lightly processed, partially processed, fresh processed, fresh cut, and pre prepared. It can be defined in many ways for example as "least possible treatment to achieve a purpose". A more specific definition is as the method that "preserve foods but also retain to a greater extent their nutritional quality and sensory characteristics by reducing the reliance on heat as the main preservative action. In a broader way it can also be defined as the processed foods have been slightly altered for the main purpose of preservation but which does not substantially change the nutritional content of the food. Generally minimal processing involves cleaning, washing, trimming, coring, slicing, shredding before packaging and storage at specific temperature. Some of the examples of minimally processed fruits and vegetables include sliced mango cheeks/melons/papaya/apple, pieces of pomelo segments, peeled and cored pineapple, chilled peach, pomegranate arils dressing, shredded lettuce, shelled peas, cauliflower florets, peeled sliced potatoes, diced onion etc. Minimally processed products are important to food service industry such as eateries and catering companies as they offer many advantages over traditional products, with respect to convenience, expense, labor, and hygiene. Even if it is very much liked by people, the production of minimal processed products is limited due to rapid deterioration and short shelf life. Whereas most food processing methods stabilize the products and prolong their shelf-life, minimal processing of fruits and vegetables increases their perishability.

Minimal processing of fruits and vegetables
The technological development and modernization during recent years have resulted in in organisation coupled with Lifestyle modification and changes in dietary habits. This development and Organisation have made it easier to meet the requirement of processed food. Processing of fruits and vegetables effects shelf life providing ready to eat food with similarities to fresh product. Before the food Industries shoulder a bigger responsibility of utilising a novel technology to produce safe food without detrimental effects on quality. The industries need to who built biological (enzymatic / fomentation and biopreservation and Engineering solutions like non-thermal high-pressure treatment, cook chill, microencapsulation, vacuum impregnation etc. For the adoption of de - constructive culinary techniques such as 3D food printing and Molecular gastronomy as well as developments in nutrigenomics and digital technologies may facilitate novel product format, personalization, and access to niche market. Concretely, e - operating movement from Naresh mint to health improvement in present conditions demand or shift from defensive market oriented offensive market developing strategies including collaborative networks with Research Organization.
It is also defined as any fruit and vegetable that has been subjected to different processing steps (e.g. peeling, trimming, cutting, washing, disinfection rinsing etc.).

The sustainable management of water resources is paramount in modern aquaculture practices to mitigate environmental impacts and ensure long term viability. This chapter explores innovative methods and innovations meant to reduce water consumption in aquaculture systems. We start with a summary of the significance of water conservation in aquaculture before going into several strategies including aquaponics, biofloc technology, and recirculating aquaculture systems (RAS). Recirculating aquaculture systems (RAS) consume less water and area while producing fish in large quantities. A balance between water use, waste discharge, energy consumption, and productivity must be found to accomplish both environmentally friendly and economically viable production. The biofloc systems emphasise the significance of heterotrophic bacteria in transforming organic materials into microbial aggregates that function as a source of nutrients and a mechanism for water treatment. The creation of microbial biomass is encouraged by biofloc systems, which also maintain excellent water quality by means of carbon and nitrogen cycling. These benefits include less water exchange needs, increased resistance to disease, and increased feed conversion efficiency. In a symbiotic system, hydroponically grown plants are fertilized by fish excrement, while plants filter water for fish, resulting in aquaponics. This closed-loop method uses less water, doesn't require artificial fertilizers, and reduces environmental impact.

Minimally invasive percutaneous osteosynthesis (MIPO), or minimally invasive fracture repair, was introduced into human orthopedic surgery during the 1990s because of several distinct advantages over traditional open reduction techniques. In MIPO, large incisions to facilitate open reduction are avoided and implants are introduced through small stab incisions in the skin. This led to advent to more biology friendly techniques. These biological techniques lay stress upon maximal preservation of blood supply around the fractured bone by minimal direct handling of the fracture environment. MIPO offer advantages which include preservation of the fracture hematoma; less surgical trauma to the surrounding soft tissues, reduced operative time therefore, decreased risk of infection and ultimately leading to indirect bone healing with abundant callus. Minimally invasive plate osteosynthesis (MIPO) is a novel technique for application of principles of biological fracture healing with a philosophy of dealing with soft tissues with utmost respect. Following advancements in implant technology and development of techniques of indirect fracture reduction this technique gained more popularity. The evolution of MIPO began with the use of bridge plating. Initially a conventional plate is applied for comminuted femoral fractures using long incisions but with preservation of the vastus lateralis muscle resulting in healing with abundant callus. Subsequently, the size of incisions got decreased, rather two small incisions are given at proximal and distal ends and plates are bridged sub muscularly over the fracture fragments. This technique causes minimal distress to soft tissues and bone, provides access to the bone through soft tissue windows, with minimal or no contact with the fracture by indirect reduction tools and leaving behind minimal foot prints.

Introduction

Horticultural crops comprising of fruits, vegetables, flowers, medicinal and aromatic plants, and mushrooms play an important role in meeting the livelihood, nutritional security and socio-economic development of farmers. India’s horticulture production (287 mt) surpassed food grain output (265 mt) fifth year in a row in 2016-17 (First Advance Estimates, 2016-17). Horticultural crops together contribute around 30.4% to the agricultural GDP from nearly 14% of the total cropped area, and contribute nearly 37% to the export of the agricultural commodity from the country (Anonymous, 2015). Fruits and vegetables are an important part of the human diet and a major source of biologically active substances such as vitamins and secondary metabolites. India is the second largest producer of fruits and vegetables in the world, with a combined production of 260.7 million metric tons (91.7 million metric tons of fruits and 169 million metric tons of vegetables) during 2016-17.

Rapid growth in horticultural production has been accompanied by heavy use of pesticides thus causing major concern over health effects. Heavy pesticide use occurs, in part, because numerous pests attack horticultural crops, including the fruit itself, reducing market value and yield on high-value crops. Pesticide use raises safety concerns for agricultural workers who apply pesticides. Concern is particularly high in flower production because of heavy spraying in enclosed conditions. Potential food safety risks from pesticide residues are also a significant issue for importers of fresh fruits and vegetables and a market-risk factor for exporters who may have shipments detained or rejected if residues exceed allowable limits (George et al., 2003).

The increased use of chemical pesticides on horticultural crops has raised a number of economic, ecological and health concern. Economic concerns arise from the over reliance and use of chemical pesticides which increase the costs of production. Indiscriminate use of pesticides has resulted in ecological problems of common pests developing resistance, elimination of natural enemies and other beneficial arthropods, and environmental pollution. Human health concerns focus on risks from shortcomings in protective clothing, large deviations from recommended doses/situations, and excessive run-off into the soil and water sources. These concerns are exacerbated by poorly regulated internal markets for pesticides that have fostered usage of banned or outdated products; creating a situation that if not stopped will negatively impact on horticultural exports to countries with more stringent regulatory requirements for fresh crop produce. Meeting these food safety requirements has become a major challenge for the fresh produce export sector of many countries. To ensure and maintain export compliance, grower and consumer safety, and environmental integrity; farmers, government and development partners are developing programmes designed to improve pesticides usage, regulation and management on horticultural crops (Karungi et al., 2011). In this chapter, major important horticultural crops grown in India have been selected to illustrate trends in pesticide usage and regulation, and the development and application of alternative pest management practices through farmer participation and training.

60% - Bottlegourd, pumpkin, bittergourd, watermelon

65% - Cotton varieties, bhendi

EXPERIMENT: MINIMAL PROCESSING OF CAULIFLOWER (FREEZING PRESERVATION AND STEEPING PRESERVATION)

Materials and reagents

Material : Fresh cauliflower, glass jars, polythene pouches

Reagents: 15% sodium chloride

Environmental protection Agency (EPA)has established category of pesticides called “Reduced Risk” pesticides to encourage the development, registration and use of products which could result in reduced risks to human health and the environment. New Generation pesticides are considered for “Reduced Risk” status if they have at least one or more of the following status: low risk to human health, low toxicity to non target organisms, low potential to contaminate ground water, surface water or other valued environmental resources and have the potential to expand the adoption and effectiveness of IPM.

1. Introduction

Antheraea assamensis is lepidopteron insects of Assam which is commercially utilized for the heritage golden silk “muga”. Rearing of muga silkworm is one of the most significant traditional handloom industries restricted only to the North Eastern Region of India (N.E. India) and plays a major role in the rural economy.  Considering the ecological conditions, food plant distribution, presence of eco-types and species of diverse nature in co-existence, it is speculated that this region is a possible home of origin of Antharaea, from where radiations would have occurred (Neog et. al., 2010). Despite the fact that N.E. India is the original home of muga, earlier studies have shown that the population is declining due to depletion in genetic variability (www.cdfd.org.in/wildsilkbase/info_moths.php).

Introduction

The inevitability of detrimental effects of climate change is looming large not only on the sustenance of agriculture, but also on the survival and progress of mankind. Estimates by the Organization for Economic Cooperation and Development (OECD) reveal that the atmospheric concentration of GHG would exceed 680 parts per million (ppm) CO₂-equivalents by 2050, which is about 50% higher than baseline year 2010 (OECD, 2012). Additionally, global temperature is predicted to increase by 2°C within this period, resulting in meansea level rise and erraticweather conditions. Consequently, the catastrophic effects on food consumption pattern by the end of 2050 will create malnutrition in at least 290 million people. Agricultural crops provide 63% of the human protein, and additionally supply almost 100% protein to the livestock, which are the second major sources of protein in human diet. Altogether, the detrimental effect of climate change on agriculture would make about 300 million additional people malnourished. Add to that a 2.7 billion increase in human population by 2050, coupled with shortage of water availability that would affect 3.9 billion people by 2050, and one can easily perceive the grim scenario for our kind in not so distant future.

Tamarind (Tamarindus Indica)

Introduction

The fruit of tamarind a pod 5 to 15 cm long, 3 to 10 seeds surrounded with edible pulp which is principal souring agent for sauces, chutney, in beverages and in general cooking. Pulp is carminative, laxative, given as infusion in biliousness and febrile conditions. It is also used in dyring and tanning and for polishing and cleaning metal ware. The tartaric acid is extracted from unripe fruits. The polysaccharide (jellose) is extracted from seeds, which is used as a sizing material in the cotton and jute industries. Besides, polyose obtained from the seed is good substitute for fruit pectin in the preparation of jam, jelly or marmalade. The bark and leaves are used for tanning. Tamarind balls are prepared after taking out seeds from the fruit. Tamarind paste and tamarind juice concentrate are the other commercial products.

The fruits, flattish, bean-like, irregulary curved and bulged pods, are born in great abundance along the new branches and usually vary from 2 to 7 in long and from 3/4 to 1 1/4 in (2-3.2 cm) in diameter. Exceptionally large tamarinds have been found on individual trees. The pods may be cinnamon-brown or grayish-brown externally and, at first, are tender-skinned with green, highly acid flesh and soft, whitish, under-developed seeds. As they mature, the pods fill out somewhat and the juicy, acidulous pulp turns brown or reddish-brown.

Greens and salad crops are grown for their foliage and are used since antiquity in soups, boiled, pickled or eaten raw and are recognized as important ingredients in the diet. Stephen Switzer, in Practical Kitchen Gardner (1727) identified 30-40 species as raw salads. Plants like Purslane, Burdock, Orache, Borage, Salad Burnet, Sea Kale, Dandelion, French Sorrel, Alexanders and many other plants are used as greens.
 
Greens and salads are very well represented in the garden works of John Randolph and Joseph Prentis in Williamsburg who  described that markets carried a wide selection of greens making available to the general public. But the salad greens were not mentioned in local diaries as often as common vegetables like cauliflowers, artichokes or melons, because they were used more as a garnish than as a main dish.
 
The popularity of individual varieties of greens changed over time. Many of the minor greens, like Purslane and Alexanders were common in the 17th century and before, but largely disappeared by the 18th century. Rocket, or Arugula, was listed by all authors in 16th and 17th century works but fell out of favor in England by the middle of  18th century.

Introduction
Japanese mint (Mentha arvensis) was first introduced in India at Regional Research Laboratory, Jammu during 1952 from Japan (Kapoor et al., 1955); and then to Drug Research Laboratory, Jammu at Chakrohi farm. Subsequently, it was introduced to CIMAP Northern Zonal Research Station at Haldwani in Nainital district (U.P.) during 1963-64. In India,  the crop is mainly grown in Tarai districts of U.P. (Nianital, Badayun, Bilaspur, Rampur, Moradabad and Bareilly); extending to parts of Indo-Gangetic plains (Barabanki and Lucknow); and parts of Punjab (Ludhiana and Jalandhar) in the north-western India. Mint or Pudina comes under a small genus Mentha of aromatic perennial herbs which belongs to family Labiatae (Laminaceae), distributed mainly to temperate and sub-temperate regions of the world. It has blue, laverder or white flowers in whorls.
Peppermint (M. x piperita) and spearmint (M. spicata) are largely cultivated in America, mainly in Oregan, Indiana, Idaho and south Michigan states. It was introduced in India during early 1980s. Uses
The above-ground herb (foliage) on distillation yields essential oil containing a large variety of aroma chemical command a large and world-wide demand in industry as given below.

Introduction
Japanese mint (Mentha arvensis) was first introduced in India at Regional Research Laboratory, Jammu during 1952 from Japan (Kapoor et al., 1955); and then to Drug Research Laboratory, Jammu at Chakrohi farm. Subsequently, it was introduced to CIMAP Northern Zonal Research Station at Haldwani in Nainital district (U.P.) during 1963-64. In India,  the crop is mainly grown in Tarai districts of U.P. (Nianital, Badayun, Bilaspur, Rampur, Moradabad and Bareilly); extending to parts of Indo-Gangetic plains (Barabanki and Lucknow); and parts of Punjab (Ludhiana and Jalandhar) in the north-western India. Mint or Pudina comes under a small genus Mentha of aromatic perennial herbs which belongs to family Labiatae (Laminaceae), distributed mainly to temperate and sub-temperate regions of the world. It has blue, laverder or white flowers in whorls.
Peppermint (M. x piperita) and spearmint (M. spicata) are largely cultivated in America, mainly in Oregan, Indiana, Idaho and south Michigan states. It was introduced in India during early 1980s. Uses
The above-ground herb (foliage) on distillation yields essential oil containing a large variety of aroma chemical command a large and world-wide demand in industry as given below.

7.1. Origin and distribution

• Originated in the Mediterranean basin and spread to rest of world by both natural and artificial means.

• USA - major producer of pepper mint and spear mint

• Bergamot mint - native of Europe and naturalized in eastern USA

• Grows successfully in temperate and subtropical region of India.

• India - Japanese mint - Terai region, extending to parts of Indo Gangetic plains and parts of Punjab in North-Western India.

7.2. Economic importance

7.2.1. Japanese mint or corn mint or field mint (M. arvensis), 2n: 36, 72.

Scientific name: Mentha spp.
Family: Lamiaceae
Mint belongs to the genus Mentha and is part of the Lamiaceae family, including popular herbs like basil, sage, and rosemary. There are several commercially grown mint species, each with unique chemical compositions, aromas, and uses.
Origin and distribution
Mint originated in the Mediterranean region and spread globally through natural and artificial means. Japanese mint is widely cultivated in Brazil, Paraguay, China, and India, while peppermint is grown in the USA, Morocco, Argentina, and Australia.
Botany
Japanese mint (Mentha arvensis) is a perennial, ascending herb that typically grows to a height of 60-80 cm, with the potential to reach up to 100 cm under favorable conditions. This herb is primarily propagated through its stolons, which enable it to spread and establish new plants. The leaves of Japanese mint are lanceolate-oblong in shape, featuring sharp teeth along their edges, and are supported by small petioles approximately 5 mm in length. The leaf lamina itself measures between 5 to 15 cm in length. Notably, the lower surface of the leaves is densely covered with hairy growths of glandular trichomes. The plant produces an abundance of small, purplish flowers in axillary and terminal verticillasters. These flowers are characterized by a corolla measuring 4-5 mm in length and a calyx that is narrowly deltoid and acuminate, measuring 2-3 mm. Japanese mint is sterile and does not produce seeds, relying solely on vegetative means of propagation.

Potted Plants

In urban areas, scarcity of space compels the dwellers to take up gardening on rooftop, terrace, balcony or small space adjacent to the house. Usually, plants are grown in pots or containers for rooftop gardening. Big size pots with diameter of 30 cm or more are required for growing rose plant. It is necessary to prefer tall pots to obtain appropriate growth of the plant having deeper root system. Now-a-days, pots of different materials such as clay, cement and plastic are used for growing potted plants. Usually, clay pots are better than plastic pots as clay is slow in transfer of heat thereby maintaining the root zone cooler. Of course, plastic pots are lighter and suitable for use on the rooftop as those put less load on the building structure. Light coloured plastic is preferred to dark colour as those generate less heat. Although heavier, cemented pots are more durable than earthen or plastic pots. The pots should have adequate drainage facility with holes in the bottom. Besides, a layer of gravel or medium-size stone of one-inch thickness are to be placed at the bottom of the container to facilitate drainage.

This chapter deals with equipment and machineries that are used in certain specific operations/ areas.

25.1. Lac cultivation

High-capacity scraper cum grader, scraper cum grader

25.2. Mushroom production

Grain Cleaner, Grain boiler, Boiled grain and Chalk powder mixer, Bag/bottle filler, Spawn inoculators, Substrate mixer - manually operated

1 Deficiency of which of the following trace minerals leads to parakeratosis of skin in pigs

a) Zinc b) Copper

c) Cobalt d) Iron

1 Goose stepping gait is observed due to deficiency of

a) Biotin b) Pyrodoxin

c) Pantothenic acid d) Niacian

1 The system that is most susceptible to hypoxia is

a) Respiratory System b) Cardiovascular System

c) Nervous system d) Digestive system

1 The focal point of any disease investigation in animal is making of

a) Treatment b) Diagnosis

c) Management d) Prognosis

1 Hypoxia caused due to defective oxygenation of blood in pulmonary circulation

a) Anoxic anoxia b) Anaemic anoxia

c) Stagnant anoxia d) Histotoxic anoxia

1 Ovine ketosis is more common during

a) Early lactation b) Late Pregnancy

c) Early Pregnancy d) Late lactation

1 Hepatosis dietetica in swine is caused by

a) Deficiency of vitamin-E & Se

b) Feeding of high energy diet

c) Excess of unsaturated fatty acid in the diet

d) Deficiency of vitamin A

Unna’s Method for Mast Cells
Tissues fix in 10% neutral buffered formalin and process for routine paraffin sections
Protocol
1) Deparaffinise the paraffin sections with two changes (10 minutes each) of xylene.
2) Descending grades of ethanol from absolute to 50% solution (2 minutes each).
3) Hydrate the sections with distilled water 5 minutes.
4) Polychrome methylene blue solution for 10 minutes.
5) Rinsing in distilled water.
6) Differentiate in glycerin-ether solution for 30 seconds to 1 minute.
7) Washing in water for 2-3 minutes.
8) Blotting with filter paper.
9) Dehydrate quickly in 100% ethanol.
10) Clearing in xylene, two changes of 30 minutes each.
11) Mount glass cover slip with DPX.

• Epidemiological definitions

 • List of tests for international trade

 • OIE listed diseases

 • Solutions and reagents

 • Age and body weight of animals

 • Rectal temperature of animals

 • Normal values of blood vascular system

 • Vaccination schedule