eChapters

The stresses, drought, salinity, chemicals, cold and hot temperatures, have interconnected effects on plants, resulting in the disruption of protein homeostasis. Maintenance of proteins in their functional native conformations and preventing aggregation of non-native proteins are important for cell survival under stress. The heat shock proteins buffer this environmental variation and are therefore important factors for the maintenance of homeostasis across environmental regimes. Heat shock proteins are known to be expressed in plants experiencing high-temperature stress. Heat shock proteins are important in relation to stress resistance and adaptation to the environment. Their molecular function might be membrane or protein stabilization, but, for now, for most heat shock proteins the molecular function remains to be elucidated. The general observation of the response and induction of heat shock proteins following heat stress suggests that they play a fundamental role in cellular homeostasis. It is possible that heat shock proteins may be involved with the phenomenon of acquired thermotolerance. Heat stress disturbs cellular homeostasis and can lead to severe retardation in growth and development, and even death. Temperature stress can have also a devastating effect on both the plant anabolism and catabolism, initially acting on protein complexes, being the quaternary structure the first folding that is lost during heat stress or heating. Understanding the role of HSPs in relation to stress resistance in a more applied perspective as a potential indicator of stress is important. New technological developments make it possible to investigate the role of genes coding for heat shock proteins in greater detail. A combination of genomics and proteonomics will further elucidate the effects of stress on expression patterns at the DNA, RNA and protein level.

Meaning of Market Energy Strategy

Market Entry Strategy

When an organization has made a decision to enter an overseas market, there are a variety of options open to it. These options vary with cost, risk and the degree of control which can be exercised over them. The simplest form of entry strategy is exporting using either a direct or indirect method such as an agent, in the case of the former, or counter trade, in the case of the latter. More complex forms include truly global operations which may involve joint ventures, or export processing zones. Having decided on the form of export strategy, decisions have to be made on the specific channels. Many agricultural products of a row or commodity nature use agents, distributors or involve Government, whereas processed materials, whilst not excluding these, rely more heavily on more sophisticated forms of access.

Significance in Agriculture

The Green Revolution resulted in many fold increase in the food grain production. Crop yields have increased steadily over time, but continuing these increases above the current high levels would be difficult. But in order to meet the demands of the increasing population, the crop production must increase in a sustainable manner. Sustainable increase in the total production without increasing cultivated area represents a huge challenge that can only be met by integrative investigations at the whole plant-plant community level. Improvement of crop production systems will require a thorough understanding of basic principles of yield production. This involves the study of the plant processes responsible for the growth, development and production of economic yield by crop plants, focusing on whole plants and plant communities and not individual plant parts, organs, or cells because most of the processes that control yield operate at the whole plant-plant community level.

The processes responsible for the primary productivity of crop communities are photosynthesis, respiration, transpiration, nutrient utilization and how the products of these processes are converted to economic yield and morphogenetic processes.

Crop physiology is the study of plants at the whole-plant and plant-community level of organization and Agronomy is the study of crops and cropping systems at the farm level over a period of time. At this level of organization, the complexity of the system is so large that comprehensive attempts are to be made to examine the mechanisms underlying the crop responses to management or climate.

The scientific approach to agriculture has been to isolate (i.e., the experiments in which everything else is equal except the studied phenomenon) and to reduce (i.e., the process by which, a phenomenon is quantified in terms of one or more essential molecular processes), because the production system is too complex. Whereas the unraveling of crop production systems to simple chemical and physical phenomena has improved our general understanding of the system, it is necessary to understand how these chemical and physically processes interact within a whole plant grown from seed to maturity under natural conditions for this information to be useful in agronomy.

5. 1 Irrigation Channels

Canal or channel is an artificially made conduit through which water is supplied to the field from river, tank, reservoir or wells. The open channel is the most common type of water conveyance system. If the pipes and drains are partially full behave like open channel. The irrigation channel may be lined or unlined and the flow is either uniform or varied.

The canal may be classified in following ways.

(a) Classification based on the source of supply

(i) Permanent or perennial canal

(ii) Inundation canal

Biosecurity refers to the measures aimed at preventing the introduction and/or spread of harmful microorganisms to animals and plants in order to minimize the risk of transmission of infectious disease. Biosecurity is of growing interest as a result of developments at the international level, including globalization of the world economy, technological progress and the rapid increase in communications, transport and trade. Against this background, there is concern that the appropriate level of protection of human, animal and plant life and health is not being maintained as risks increase. Biosecurity is a strategic and integrated approach that encompasses the policy and regulatory frameworks for analyzing and managing relevant risks to human, animal and plant life and health, and associated risks to the environment. 

Deviation from normal well being may be for various kinds involving one or more organs and exhibiting array of symptoms. Examination of animals for diagnosis of disease is strenuous process because investigator has just got to know by several means of examination. The evidences produced by owner, animal house, feed being provided supported by prevailing environment and climate are immensely helpful in accurate diagnosis. Diagnosis, of production related diseases, is more difficult because of biasness in history revealed by the owner. At the same time diagnoses of poisonings are also not easy because owner’s description about possible cause and symptoms exhibited by sick animals are vague. So careful quizzing of owner about each and every aspect of disease and animal obviously seems to be first step towards diagnosis, followed by examination of animal. Examination of environment in relation to history revealed by owner and observations drawn from the examination of animal can infer some conclusion about cause of disease. Support of laboratory examinations such as fecal test, blood test and urinalysis are important tools in disease investigation. Following steps are essential in disease diagnosis.

Tropical tuber and root crops are subjected to the depredation of a number of insect and non insect pests. Comprehensive studies revealed that cassava is attacked by a wide range of arthropod and rodent pests. An exhaustive global account of cassava pests and their management was given by Anon (1978), Bellotti and Schoonhoven (1978) and Bellotti et al. (1999). Lal and Pillai (1982); Pillai and Palaniswami (1984), Pillai (1994) and Palaniswami (1999) reviewed the pests of cassava in India. Anon (1978), Sutherland (1986) and Jansson and Raman (1991) covered world sweet potato pests. Palaniswami (1999) detailed the pests attacking sweet potato in India. Pests of edible aroids, yams and chinese potato were comprehensively reported by Anon (1978); Mitchell and Maddison (1983) and Palaniswami (1994, 1999). In India about 34 species of insects and non-insect pests infest cassava, 80 species attack sweet potato, 46 species on edible aroids, 21 on yams and 10 on chinese potato. One of the main factors for the low productivity of these crops in India is attributed to the pest complex attacking them (Chadha, 2001).

The term soil refers to the outer, loose material of the earth’s surface, a layer distinctly different from the underlying parent rock. A number of features characterize this region of the earth’s crust. It is the natural medium, which supports plant growth. It provides the physical support needed for the root system and also supplies nutrients needed for plant growth. It is a perennial source of organic matter. It supports a vast population of microorganisms.

Entomopathogenic / Entomophilic / Insecticidal/ Entomogenous nematodes can be found in the orders Aphelenchida, Ascaridida, Mermithida, Oxyurida, Rhabditida, Spirurida and Tylenchida. Phylogenetic relationships reveal that nematodes have established trophic associations with insects numerous times (Adams and Nguyen, 2008). Nematodes may have a proclivity (exaptation) for negotiating the natural defenses of insects and their associations with insects are tremendously fruitful (ecologically and evolutionarily).
3.1 Evolution of Parasitism in Insect-transmitted Plant Nematodes
Nematode-insect associations have evolved many times in the phylum Nematoda, but these lineages involve plant parasitism only in the Secernentean orders Aphelenchida and Tylenchida. In the Aphelenchida (Aphelenchoidoidea), Bursaphelenchus xylophilus (Pine wood nematode), B. cocophilus (Red ring or Coconut palm nematode) (Parasitaphelenchidae), and the many potential host-specific species of Schistonchus (fig nematodes) (Aphelenchoididae) nematode-insect interactions probably evolved independently from dauerforming, mycophagous ancestors that were phoretically transmitted to breeding sites of their insect hosts in plants (Giblin-Davis et al., 2003). Mycophagy probably gave rise to facultative or obligate plant-parasitism because of opportunities due to insect host switches or peculiarities in host behavior. In the Tylenchida, there is one significant radiation of insect-associated plant parasites involving Fergusobia nematodes (Fergusobiinae: Neotylenchidae) and Fergusonina (Fergusoninidae) flies as mutualists that gall myrtaceous plant buds or leaves. These dicyclic nematodes have different phases that are parasitic in either the insect or the plant hosts. The evolutionary origin of this association is unclear.

Sprinkler irrigation is an advanced method of irrigation in which water is sprayed to air and allowed to fall on the ground similar to rainfall. The spraying of water occurs through nozzle connected to a network of pipes with water under pressure. The rate of application and area of coverage under a sprinkler is regulated by suitable selection of nozzle size and pressure in the system.

History of Sprinkler Irrigation

The sprinkler irrigation has started elsewhere in the world in the early part of twentieth century. Before 1920, sprinkler irrigation was limited to orchard, nurseries and intensive vegetable cultivation. The cost of sprinkler reduced considerably by the development of impact sprinkler and lightweight steel pipe with quick couplers in the 1930s. As a result, sprinkler irrigation began to spread in larger area and to the area of field crops. However, sprinkler irrigation developed mainly after the Second World War with the introduction of lightweight portable aluminum pipe.

Sprinkler irrigation has started in India from mid of 1950s. Due to requirement of high initial investment, the average Indian farmers cannot afford the system and therefore the area under sprinkler irrigation in India was 0.66mha (approx.) out of total irrigated area of 87.80mHa in 1995 (INCID). The sprinkler irrigation was first introduced in India in hilly regions such as Western Ghats in Kerala, Tamil Nadu, Karnataka and in the North Eastern States especially by plantation owners for irrigating tea, coffee and cardamom crops. Since the cost of aluminum pipe is high, to replace it, High Density Polyethylene Pipe (HDPE)/PVC with suitable modification have been introduced in sprinkler system. However, the area under HDPE/PVC piping system is below 20% to the total area under sprinkler irrigation. The remaining area is cultivated under aluminum or steel based sets. The indigenous manufacturing of the system has started in India only 35-40 years ago and there are about fifty numbers of manufacturers till 1996 (INCID). The details of the cultivated area under sprinkler irrigation system in the world and in Indian States are given in Table 8.1 & 8.2 respectively.

1.0 INTRODUCTION

Soil fertility can be considered to be a measure of the soil’s ability to sustain satisfactory crop growth, both in the short and longer-term. Organic farming recognizes the soil as being central to a sustainable farming system. It could be argued that organically managed soils require a higher level of baseline fertility because shortfalls cannot be made up by applications of soluble fertilizers. Soil fertility is determined by a set of interactions between the physical and chemical environments of the system and by biological activity. Organic matter is linked intrinsically to soil fertility, because it is important in maintaining good soil physical conditions (e.g. soil structure, aeration and water holding capacity) and is an important nutrient reserve. Organic matter contains most of the soil reserve of N and large proportions of other nutrients such as phosphorus and sulphur.

The name Lepidoptera derived from the Greek words “lepido” meaning Scale and “ptera” meaning wings refers to the flattened hairs (Scales) that cover the body and wings of most adults. Lepidoptera (Moths and Butterflies) is the second largest order (1.10 lakh sp.) in the class insecta, characterized by the body, wings and appendages being generally covered densely with pigmented scales which provide the colour pattern of the characteristic of the species and play an important role in courtship and intraspecific recognition.

Adults

• Head: Hypognathus and relatively small.

• Compound eyes are large and set well apart. Ocelli two in number in moths or reduced to Chaetosoma in butterfly.

• Mouthparts form a coiled tube (Proboscis) beneath the head.

• Antennal type:

• Butterflies: Clubbed, clavate, capitate.

• Moths: Pectinate (Uni/Bi).

• Adults have siphoning type mouthparts except in micropterygidae (Mandibulate mouthparts). Front wings large, triangular, hindwings large, fan shaped.

• Body and wings covered with small, overlapping scale.

• Thoracic segments are fused and metathorax is the largest and most prominent.

• Wings covered with scales. Androconia (Plumules) on upper surface of wings in some males serves as outlet for odouriferous glands. are fringed distally with each tip finely divided. • Wing coupling apparatus variable (generally Frenulum and retinaculum or Amplexiform type)

Thermodynamics is defined as the “branch of science which deals with the interaction between the heat and work”[1]. Thermodynamics is also sometimes stated as the science of energy. Thermodynamic deals with the principles of energy and energy conversion in engineering. It also considers the thermodynamic properties of substances. Thermodynamics deals with the conversion of heat into work and vice-versa.

Introduction

The life cycle of a plant passes through biotic and abiotic stresses and plants are being attacked at different stages of growth by a number of disease causing organisms. These organism including bacteria, fungi, viruses, and nematodes attacks plants. These pathogens caused large crop losses and probably since the beginning of agriculture have contributed to human hunger and malnutrition. The control of plant diseases is thus of fundamental importance and is a major objective of plant breeding and pathology programme and agriculture chemical industry. Plants resists pathogens attack both with preformed defenses such as antimicrobial secondary compounds and by inducing defense responses (Hammond and Jones, 2000, Heath, 2000). Inducible defenses can be activated upon recognition of general elicitor such as bacterial flagellin and even host cell fragments released by pathogens damage (Gomez and Boller, 2000, Hammond and Jones, 2000). However, plants also involved sophisticated recognition systems to detect proteins produced during infection by specific races of pathogens (Martin et al., 2003).

3.1 Redgram or Pigeon Pea

In any production programme, the importance of quality seed needs hardly be emphasized. In fact, the major bottleneck in the pigeon pea cultivation programme is the restricted or poor availability of quality seeds of the desirable varieties. The seed has been considered as the ‘vehicle of change’. With better attention paid to their interaction among water, fertilizer and seed of improved varieties, the production can be maximized. Although a numbers of improved varieties of pigeon pea have been released since 1970, organized seed production programmes have been rather limited. Most of our national efforts in this direction continue to be centralized on cereal crops like wheat, rice and hybrid millets. Moreover, the benefits of the current research will not reach the farmers unless large-scale seed multiplication programmes are organized.

Agriculture is undoubtedly the largest livelihood provider in rural India. As we enter a new post WTO Scenario and IT revolution, new inventions are happening day by day in every sphere. Agriculture is not culture now, it is agri business! Agriculture constitutes over 25% of India’s GDP. In recent years, much emphasis has been given by the Ministry of Agriculture on commercializing agricultural production in the country. Adequate production and distribution of food has become a high priority and global concern. In the fast changing world and increasing competition in a globalized economy, there is a need for exploiting the available resources to the maximum level and use of best technologies available world over, to cope up with domestic demand of food and also to target export market. This will be particularly relevant in South India, where farmers grow a number of crops, but have technical constraints in enhancing production and productivity because of inadequate exposure to high technology & inputs coupled with advanced production practices, logistics and marketing. In addition, shortage of labour is a major concern for progressive farmers of South India who are ready to offer more wages to labourers. Therefore, they are forced to become machinery-dependent in their farm operations. As a result, Southern India is emerging as one of the hottest destinations as well as a strong market with buying potential for farm machinery and equipment.

A. Mass Production of Quality Bio-control Agents: Techniques, Formulations, Economics, Field Release/Application, and Evaluation

Biological control agents, such as phytophagous insects, play a significant role in integrated pest management by targeting and suppressing weed populations naturally. Effective utilization of these agents requires understanding their mass production, formulation, economics, field release/application, and evaluation.

Techniques for Mass Production of Bio-control Agents

Mass production of bio-control agents involves rearing insects or other organisms in large quantities while maintaining their effectiveness and quality. The following are key techniques used in mass production:

1. Laboratory Rearing: Laboratory rearing of bio-control agents is a meticulous process that ensures the continuous production of high quality insects under controlled environmental conditions. This technique involves creating optimal conditions for temperature, humidity, and light to simulate natural habitats. Nutritional requirements are met by providing specific diets, which can be natural or artificial, tailored to the needs of the bio-control agents. Breeding protocols are established to manage mating, egg-laying, and larval development cycles efficiently. By controlling these factors, laboratory rearing ensures a stable and sustainable supply of bio-control agents for field application.

In ancient days spices and herbs were valued as basic ingredients of incense, embalming preservatives, ointments, perfumes, antidotes against poisons, cosmetics and medicines and were used less in culinary preparations. A notable use of spices and herbs in ancient and medieval times were for the treatment of a variety of illnesses. Subsequently spices and herbs had come to be used to flavour food and beverages. In the course of time spices and herbs were shown to be useful not only for making the food lasting and palatable, but also in retarding or preventing rancidity and spoilage. This knowledge acted as a catalyst for the use of spices in a variety of processed foods. Based on the uses, herbs and spices are classified in to culinary, cosmetic and pharmaceutical. In the modern world spices have wide affiliation in the culinary art of people around the world, and are used in food industry for flavouring and seasoning, as well as in pharmaceutical preparations in the traditional systems of medicine and in beauty care. Spices and herbs are useful because of the chemical constituents contained in the form of essential oil, oleoresin, oleogum and resins, which impart flavour, pungency and colour to prepared dishes.