eChapters

Ageratum is a winter season annual that is grown for its beautiful flowers. It belongs to family Asteraceae. The word “Ageratum” is derived from the Greek words “ageras” meaning non-aging referring to the longevity of the whole plant. Ageratum houstonianum (flossflower, bluemink, blueweed, pussy foot, Mexican paintbrush) syn. Ageratum mexicanum Hort. is a cool-season annual plant often grown as bedding in gardens. Ageratum houstonianum is from Mexico and is named after William Houston (1695-1733), a Scottish physician who collected the first ageratum plants. The flowers are blue in colour (sometimes white, pink, or purple). The ray flowers are threadlike leading to the common name and are used for flower arrangements and potted ageratum plants are used for beautification of the surroundings. Growing ageratum is very easy under suitable climatic conditions. The genus Ageratum consists of some ornamental species, but only a few species have been phytochemically investigated (Burkill, 1985). A. houtsonianum contains essential oil the main constituents were precocene I (23.34%), precocene II (43.99%) and beta -caryophyllene (9.18%) (Menut et al., 1993 and Shahi et al., 1996).

Impatiens balsamina (Balsam, Garden Balsam or Rose Balsam or Gulmehndi) is a species of Impatiens widely cultivated as an ornamental plant in landscaping belongs to the family Balsaminaceae. It is a qualitative short-day plant, propagated by seed and is one of the popular species of North India. It is called kamantigue in the Philippines. This species of Kamantigue are used in teas. In many English speaking countries they are known as “Touch me not”, possibly due to the ripe seed pods explosively bursting when touched. Different parts of the plant are used to treat disease and skin afflictions such as the leaves, seeds, and stems. It is also edible if cooked. Juice from balsam leaves treats warts and also snakebite, while the flower can be applied to burns to cool the skin. Impatiens balsamina L. has been used as indigenous medicine in Asia for the treatment of rheumatism, fractures, and fingernail inflammation. In Korean folk medicine Impatiens (‘Bong Seon Wha Dae’) has been used to cure constipation and acute gastritis by meat. There are mainly four forms of I. balsamina namely red, purples, white and pink.

Cosmos is a flowering plant belongs to family Asteraceae. Cosmos bipinnatus is ornamentally important species grown for garden display. The word cosmos is derived from the Greek word “kosmos”, which means a balanced universe or order, harmony and often referred to as Mexican Aster. The species name is from the Latin “bipinnatus” meaning “twice-pinnate” The botanical epithet is from the Latin “pinnatus” meaning “with leaflets arranged in opposite pairs”. Cosmos flowers are produced in a capitulum. Modern varieties come with single or double flowers, picotee edges, and even furled petals in the variety Seashells. Ornamental uses of cosmos include cut flowers and as border annual in the gardens. It is a very popular flower for summer bedding. Cosmos has a pleasant aroma and attracts butterflies to the garden. Essential oil extracted from leaves of cosmos. The major constituent of C. bipinnatus contained 15-17% beta-elemene, 15-17% beta-caryophyllene, 10-21% germacrene D and 12-15% bicyclogermacrene (Menut et al., 2000).

Impatiens is the most popular bedding plant grown worldwide. The genus Impatiens is estimated to contain about 850 species (Grey-Wilson, 1980b). The majority is native to tropical and subtropical regions of India and Africa. The popularity of Impatiens walleriana is mainly due to its propensity for producing large numbers of flowers under low light intensity (Simmonds, 1980). Due to the high economic value and consumer demand for bedding impatiens, there has been a concerted effort by plant breeders to release a wide range of cultivars having different flower colours and distinctive foliage. Previously known as I. sultanior, I. holstii, it has several common names including “Busy Lizzie” and “Patience Plant”. It is one of two important groups of Impatiens in the horticulture industry with the New Guinea Impatiens (Impatiens hawkeri) group being the other. Despite being Impatiens walleriana is one of the most important bedding plants in the world, information on I. walleriana relatively scarce. Impatiens walleriana continues to lead as one of the three most important bedding plants worldwide. It is available as both seed and vegetative products. The history of its development, marketing success, wide adaptability, a large palette of flower colours and forms and unparalleled garden performance as a bedding plant for shade are described as an aid for continued crop development with breeding lessons for other flowering crops.

Pansy belongs to the family Violaceae, genus Viola and species tricolor. Pansy also known as butterfly flower, cat face. Pansies are annuals or short-lived perennials, grow 15-30 cm tall and have heart-shaped leaves at the base and oblong leaves growing from the stems. The pansy is quite durable and a “flower for all seasons”. The fragrant and edible blooms are desirable in gardens. Pansy popularity increases possible due to its ease of growing. Whether grown from seed or bedding plants, pansies are relatively disease and pest free blooming prolifically for the gardener’s enjoyment.

Petunias (Petunia spp.) are annual or perennial plants belonging to Solanaceae family. The common kinds are rather weedy in habit, but their great profusion of bloom under all conditions makes them useful and popular.  They are small herbs grown for their showy, often fragrant flower. The geographic distribution includes temperate and subtropical regions of Argentina, Uruguay, Paraguay, Bolivia and Brazil, with a centre of diversity in Southern Brazil. For longer flowering season they may be grown in bed borders, edgings, rock garden, window boxes, hanging baskets and pots. Petunia is considered to be the first cultivated bedding plant and has remained as a commercially important ornamental crop since the early days of horticulture and is one of the favourite genera for developing new varieties. Apart from its significance as an ornamental crop, petunia has proved to be one of the most excellent model crops for studies on gene regulation and genome structure, since the system combines innumerable and excellent technical features with a broad range of research possibilities.

Phlox is a perennial and annual flowering plant belongs to family Polemoniaceae. “Phlox” is a Greek word meaning “flame” and was most likely named thusly due to its bright and vivid colours. Phlox originally came from North America and was available in England by the early 1800s. It quickly grew in popularity and today it is still found growing wild in gardens across the world. Among perennials, Phlox paniculata, Phlox divariecata, Phlox glaberrima are earliest species to be cultivated and reached to England and France from Virginia (USA) in the early 18th century. Among annuals, Phlox drummondii is commonly grown in India. Annual phlox is propagated by seeds, whereas, cutting is used as propagating material for perennial species. Phlox is grown in the garden as bedding and border plant for its dramatic, fragrant, showy and long blooming flowers. The colour range includes white, rose, pink, purple, lavender, violet, pale blue, bright red and magenta. Some flowers are bicoloured.

Salvia belongs to family Lamiaceae. The genus Salvia comprises about 900 species which are grown for their ornamental flowers since they make excellent and showy borders in gardens. One of the species most commonly grown is Salvia splendens is a tender herbaceous perennial, but grown in India as winter season annual flowering plant. It bears racemes of bright scarlet flowers of large size. It has ability to grow under partial shade condition. It is commonly grown as bedding plant due to varying colours mostly scarlet, purple, orange, lavender and yellow and long lasting flowers. The word salvia was derived from Latin word ‘Salvare’ meaning ‘to heal or to be safe and unharmed’ (Blumenthal et al., 2000 and Kamatou et al., 2008) later it was translated in French as “sauge” or “sage” and in old English “Sawge” (Kamatou et al., 2008).

Zinnia is a very important summer annual belongs to family Compositae. Zinnia was named for the man who wrote the first scientific description of the flower, “Dr. Johann Gottfried Zinn” a German Professor of medicine, but it was the late 19th century that plant breeders started to pay any attention to this plant. Zinnia is a half hardy plant. They are popular for bedding however, cut flowers of zinnia remain fresh for several days. They are easy to grow from seeds. Collection of open pollinated seeds is in common practice in India. Non-uniformity of bloom with respect to colour, flower shape and size, height of the plants and excessive etiolation of the plants result into poor sale of zinnias.

Begonia is a perennial flowering plant belongs to family Begoniaceae. Begonia has rich colour and beautiful form of flowers. It is free flowering and striking foliage with free growth. The name Begonia is given by Franciscan monk Charles Plumier a plant which he found during his journey from Haiti to island Martinique. He dedicated this plant to “Michel Begon” the man who had the direct manmade over the expeditions. Begonia is easy to propagate and grown from seeds and vegetative means particularly cuttings. It is a popular flowering potted plant grown in containers and hanging baskets including tuberous, semperflorens, Rex, Elatior, Loraine and gracilis. Modern commercially cultivated begonias are mostly hybrids between wild types from all over the world.

Cactus (Opuntia ficus-indica), commonly known as prickly pear, belongs to the family Cactaceae. In local parlence, cactus is called nagphani or danda thohar. In Tamil Nadu, it is commonly known as chapathi balli. The word “cactus” derived through Latin from the ancient Greek kaktos, a name used by Theophrastus for a spiny plant (Johnson et al., 1972) which may have been the Cynara cardunculus (Sonnante et al., 2007). It is a storehouse of virtues that have been commercially unexploited so far in India. In addition, certain genera, such as Optuntia and Nopalea have economically useful plant parts. Different parts of the cactus can be used as fruit and vegetable for human consumption, fodder for cattle, and raw material for various industries to prepare plywood, soap, dyes, adhesives and glue, pharmaceutical products for treating blood sugar and various other disorders, and cosmetics such as shampoo, cream, and body lotions, etc. (Barbera et al., 1995 and  Pimienta, 1994). Similarly, the tender young pads of Optunia and Nopalea species, known as nopalitos, are extensively used as a fresh green vegetable in Mexico and Texas. Even its seeds can be used as flavouring agents. Use of cactus pear as a waterproof paint for homes is also reported.

Dahlia (Dahlia spp.) syn. Georgina belongs to family Compositae (Asteraceae). Dahlia was named after “Professor Andreas Dahl”, a Swedish pupil of Linnaeus and author of Observations Botanicae. In India, dahlia is grown as potted plant and landscape uses but it is a poor crop as commercial flower due to shorter commercial life and its potentialities have not been exploited so far. Therefore, there is need to originate more and more new quality cultivars. Dahlias are half-hardy perennials with tuberous roots. Stems are mostly erect, branched, glabrous or scabrous. The leaves 1-3 pinnate, with slightly serrated margin are produced opposite at each node on the stem. They bear flowers on a long, stiff stems well above the foliage. Ray florets are neutral or pinnate and disc florets perfect.

Geranium (Pelargonium spp.) belongs to the family Geraniaceae. The name Pelargonium was introduced by Johannes Burman a Dutch Botanist in 1738, from the Greek word “Pelargos” means stork because the seed head looks like a stork’s beak.  Due to their long and beak-shaped fruits, they are also known by the name of cranesbills. Geraniums are popular flowering plants and grown as decorative pot plants for indoor and outdoor. There is a world demand for the rose geranium essential oil of Pelargonium species which contains geraniol, linalool and citronellol, substitutes for the expensive attar of roses in the perfume trade. Pelargonium species was known for their medicinal value by the earliest indigenous people (Swanepoel, 2009).

Orchids belong to family Orchidaceae, the largest family of the flowering plants. The term ‘orchid’ has its origin from the Greek word, “orchid” meaning “testicle”, referring to the paired underground tubers of terrestrial orchids. There are several generas in orchids, which are popular for their separate importance as cut flower, pot plant, medicinal properties, flavour extraction, etc. The fascinating flowers exhibit an incredible range of shape, size and colour, long life of flowers on plant and an amazingly long keeping quality, which no other plant can claim.

Poinsettia (Euphorbia pulcherrima) is one of the most popular ornamental pot plants belonging to the family Euphorbiaceae. The botanical name Euphorbia pulcherrima means very beautiful. Euphorbia pulcherrima the name originally given by German botanist Karl Ludwig Wilenow was changed to “Poinsettia” in honour of “Mr. Poinsett” in 1836 by William Prescott. Poinsettia is a short-day, non-food and non-feed vegetatively propagated ornamental plant. Poinsettias are fascinating winter blooming small shrubs or trees which can grow anywhere from about 0.6 to 5 m tall. The coloured bracts of poinsettia plants are actually leaves. Colours of the bracts can be red, pink, orange, white or marbled. These coloured bracts are caused by photo-periodism. Poinsettias have also been called the lobster flower and the flame-leaf flower due to the red colour. California is the top U.S. Poinsettia-producing state.

Lotus belongs to the Nelumbonaceae family and the genus Nelumbo. There are two species in this genus; Nelumbo nucifera Gaertn. distributed in Asia and Oceania, and Nelumbo lutea distributed in North and South America (Qichao and Xingyan, 2005). Although, the species nucifera is the most important (commercially and culturally), it is critical to describe the American species, evaluate its horticultural value and its potential as a source of genetic diversity. The American species, represented by Nelumbo lutea (Syn. N. pentapetala or Nelumbium luteum) is known as American Lotus, Water-chinquapin and Yellow Lotus (Sayre, 2004) and is native to the eastern and central portions of the US ranging from Maine to Wisconsin and in the south from Florida to Texas. It is one of the most spectacular and graceful aquatics among all the native plants of India. N. indica are found all over India and extend as far as Kashmir to Kanyakumari exhibiting enormous thermoplasticity and phenotypic diversity with a large number of racial variants with different shapes, sizes and colours. First Indian fossilised record of N. nucifera has been reported from the Pleistocene epoch of Kashmir. The presence of Nelumbo in the Tertiary period of Assam is reported on the basis of impressions of leaves and rhizomes found in the collection from Eocene bed near Damalgiri. These records confirm the evidence in support of the view that N. nucifera is indigenous to India.

Clematis is member of the Ranunculaceae family which also known as buttercup family. This cosmopolitan genus comprises climbing lianas, small shrubs and erect sub-shrubs distributed predominantly in the temperate zone of both hemispheres but with some species distributed in tropical areas (Tamura, 1995, Johnson, 1997, Grey-Wilson, 2000 and Wang and Li, 2005). The word clematis is taken from Greek as in “klema” meaning “a vine branch”. Most species are known as Clematis in English while some are also known as Traveller’s joy, Leather flower, Vase vine and Virgin’s bower the last three being names used for North American species (Chawla et al., 2012).

Sweet pea (Lathyrus odoratus) is the only species in the genus Lathyrus and family Fabaceae which is widely cultivated as an ornamental plant. Lathyrus comes from the Greek word “Lathyros” in which the prefix “la” means “very” and suffix “thyros” means “passionate”. The “Odoratus” is derived from Latin word which means “fragrant” (Fernald, 1950). It is mainly grown for its beautiful flower colour forms. It is an annual climbing plant growing to a height of 1-2 m with the support of a terminal tendril which twines around the plants and helps to climb. The illness caused by the ingestion of sweet pea is known as odoratism or sweet pea lathyrism. Sweet pea was used to verify Mendel’s work with the garden pea (Pisum sativum L.) in the early 1900s (Bateson, 1902). The genetical phenomenon of linkage was first demonstrated in the sweet pea. It is used prominently as a model organism to study flower development due to its large, colourful and fragrant flowers. The essential oils extracted from the sweet pea can be used in perfume blends.

Abstract

The strenuous field trekking, inaccessibility, perception of geology only within the visibility range of the eyes etc. have remained matters of major constraints in the past in field based geological mapping. The remote sensing technology not only eradicated these but also provided lot many newer vistas in the field of geology. In addition, the application of such unique technology has brought out a hierarchy of newer concepts in the field of geology. The paper narrates the newer knowledge gathered on the geology of South India in the post remote sensing Era.

Abstract

The study area falls in the southern part of the Indian Peninsular comprising hard crystalline rocks of Archaeozoic and Proterozoic Era. In the present study, the GIS based 3D visualizations of gravity, magnetic, resistivity and topographic datasets were made and therefrom the basement lineaments, shallow subsurface lineaments and surface lineaments/faults were interpreted. These lineaments were classified as category-1 i.e. exclusively surface lineaments, category-2 i.e. surface lineaments having connectivity with shallow subsurface lineaments and category-3 i.e. surface lineaments having connectivity with shallow subsurface lineaments and basement lineaments. These three classified lineaments were analyzed in conjunction with known mineral occurrences and historical seismicity of the study area in GIS environment. The study revealed that the category-3 NNE-SSW to NE-SW lineaments have greater control over the mineral occurrences and the N-S, NNE-SSW and NE-SW faults/lineaments control the seismicities in the study area.

Abstract

The emergence of Remote Sensing and GIS technologies has substantially eased the problems of groundwater targeting in hard rock aquifer systems. Proper utilization of these can provide more vital information in managing such scarce resource. In this context, a new technique of GIS based visualization of groundwater levels of different periods (1985- 1990 -1995) was attempted for a part of Western Ghats hill-plain region of Tamil Nadu and various groundwater features viz: ridges, valleys, domes and basins were interpreted. The integration of such groundwater features of different periods and their analysis with structural features provided some newer information on geosystem processes and their interface dynamics with hydrosystems, from which, certain strategies were suggested for better groundwater management in hard rock areas.

Abstract

The Pudukkottai district located in the southeastern tip of Tamil Nadu, India provides a complex geological setting with three litho-tectonic blocks membered by the hard Crystalline rocks of Archaeozoic-Proterozoic Era in the west,Mio-Pliocene Sandstone/Cuddalore Sandstone in the centre and Quaternary sediments in the east. While the western and central blocks are separated by a well-defined NNE-SSW trending fault, the central Mio-Pliocene Sandstone block is cut into two parts by a N-S fault with western static block and the eastern uplifted counterpart. Besides the above, the various drainage anomalies viz; Annular, Deflected and Eyed drainages and compressed meanders interpreted using the raw and digitally enhanced satellite multispectral data show that the N-S oriented faults with oscillations from NNW-SSE to NNE-SSW, NE-SW and E-W orientations are tectonically active in the area. The integration of these active faults with known geothermal springs and the maxima axes drawn from the contours deducted from the temperature of groundwater measured during the predawn hours from the wells revealed that the N-S and NE-SW faults are the probable locales for geothermal resources in the study area. Thus the study demonstrates a newer methodology for locating the geothermal prospects.

Abstract

Sabatayn basin is one of the two mature basins producing oil and gas in Yemen. Due to the recent decline in oil production, the exploration activities have been extensively concentrated mainly on these two basins (Sabatayn and Sayun-Masilah). So, this present study has been conducted to evaluate the exploration potential of the remaining trap areas within these mature basins. Fractured basement of reservoir becomes very attractive exploration target in Yemen recently, after the recent discoveries of basement fractured oil fields. As the evaluation of basement traps needs time and fund, to reduce the same, this research study uses a new technique which was devised with the help of Geoinformatics by analyzing the surface and subsurface lineaments effectively. In this study, a satellite image Enhanced Thematic Mapper (ETM+7) based analysis was conducted for extracting surface lineaments, and for the subsurface lineaments, the basement lineaments were extracted from seismic, magnetic and gravity data. An orientation analysis of these surface and subsurface linear features was performed to detect the basic structural grains of the study area. The correlation between these structural grains and subsurface oil and gas traps was performed to understand the connectivity to the reservoirs. This paper discusses in detail about the same and the importance of using surface and subsurface lineament analysis for delineating hydrocarbon reservoirs in the study area.

Abstract

The Mesozoic sediments contribute around 54% of the oil and 44% of the gas reserves of the world (Bois et al. 1982). Indian Mesozoic basins occupy an area of about 400 x 103 sq. km and are characterized as frontier basins under category II - IV. These basins are mostly overlain by the Deccan Traps of Late Cretaceous age and are least explored. Deccan Syneclise is one of the largest Mesozoic basins in India, covering an area of ~ 273 x 103 sq. km. Geophysical studies have inferred hidden sub-trappean Mesozoic sediments with thickness up to 2.5 km. It is considered that requisite heat generation due to Deccan Trap volcanism soon after the Cretaceous sedimentation may have acted as a catalyst in hydrocarbon generation. Surface geochemical prospecting surveys along with carbon isotopic studies have been used to assess hydrocarbon generation potential of this part of the basin. The area adjoining Nandurbar beneath Narmada-Tapti region of Deccan Syneclise was selected for geochemical studies where geophysical studies have shown considerable sediment thickness. Surface geochemical studies indicate the generation of light gaseous hydrocarbons, C1 and SC2+ in the range of 3 to 1187 ppb and 1 to 1449 ppb, respectively. The carbon isotopic signatures of selected soil gas samples dC13 CH4 in the range of - 24 to -39.4‰ PDB) suggest thermogenic origin

Abstract

The state of Tamil Nadu has a low easterly gradient slope and there are number of rivers, big and small originate from the west flow towards east south easterly and confluence the Bay of Bengal. These were grouped into seventeen major and minor river basins, the Cauvery being the largest basin and the river is also a near perennial river. These river basins receive rainfall both from the southwest and northeast monsoons. The state has over 40,000 surface water bodies and number of major dams and reservoirs. Even then, since the rainfall of the north east monsoon, the major source of water source to these basins, occurs in short span of few days with high rainfall, neither adequate storage is there to store them nor the recharge possibility is available, thus all leading to flooding and wastage. The 40,000 and odd water bodies are heavily silted and polluted too. The paper provides an over view of all these, basin wise, and in addition, strongly advocates intra state river linkage and improvised irrigation management as the best option to save the state from its water deficiency.

Abstract

The Tamil Nadu is one of the leading states in groundwater development. Since the surface water resources have been fully exploited for irrigation, the groundwater is massively mined for agriculture, domestic and industrial purposes. The paper provides a synthesis of whole groundwater related issues including basin wise groundwater conditions, the aquifer types, geogenic water quality and quality deterioration due to anthropogenic activities, need for recharge, the utility of Remote Sensing & GIS etc. The paper has come out with set of recommendations as the concluding remarks.

Abstract

Water is an essential and vital component for our life support system. Drought and floods are the extreme events of rainfall and the vagaries of monsoon and hydrogeological framework in the country are highly variable from place to place. The water resources available in the country are also not uniformly distributed. The changing Landuse pattern and population growth and the resultant water resources development has lead to water stress at many places. In such areas, the extraction of excessive quantities of groundwater has resulted in the drying up of wells, damages of ecosystems, land subsidence, salt-water intrusion and other related problems. Agricultural, urban & industrial wastes are increasingly threatening the groundwater quality, which is likely to become a more serious issue in the coming years. Considering the seriousness of the groundwater contamination, Central Ground Water Board has carried out detailed studies in few hot spots in the state of Tamil Nadu. The issues related to the water resources contamination and the findings of the studies in parts of Tamil Nadu are summarized in this paper.

Abstract

In South India, tanks system is quiet ancient, meant for storing and supplying water towards multifunctional needs of the people. In Tamil Nadu, there are around 39,000 tanks with varying size and types. Over past few decades, irrigation rely on stable and reliable groundwater resources like dug and deep bore wells, consequently tanks lost their significance. Moreover, excessive siltation, improper maintenance and illegal encroachment further degraded the system. The deterioration factors are broadly categorised into problems in catchment, feeder channels and head works which eventually resulted in loss of storage capacity. The present study chiefly narrates an indirect method of estimating the loss in storage capacity of tanks and the catchment problem, especially soil erosion and its induced siltation of tanks in the downstream using geoinformatics technology. Using remotely sensed satellite data, by measuring surface area of tank loss in storage capacity was estimated through a linear model. Using Digital Elevation Model derived topographic wetness indices data, the catchment problem especially, soil erosion areas were identified and remedial measures were suggested. Under prevailing water crisis, it is essential to rehabilitate the tanks through which the surface water potential can be improved along with quality as well.

Abstract

As the available surface water is too inadequate to fulfill the man’s requirements he was forced to locate newer groundwater reservoirs on one side and to control the fast depleting water table on the other side. As the ancient techniques have failed to give precise models on groundwater targeting, he was to invent and employ newer technologies. Under this scenario the recently invented spatial technology has emerged as a very powerful tool in groundwater targeting and management. The vistas and virtues of such spatial technology in groundwater management have been discussed in this overview paper by citing some case studies from Tamil Nadu, India.

Abstract

Remote Sensing (RS) and Geographic Information System (GIS) have emerged as potential tools for competent planning and administration of water resources. In this study, a new methodology is proposed to delineate groundwater target zones using integrated RS, GIS and Analytical Hierarchy Process (AHP) method. The developed methodology is confirmed by a case study in Karur district of Tamil Nadu, Southern India. Seven thematic layers, viz., Lithology, Lineament Density, Geomorphology, Slope, Post– Monsoon Water Level, Drainage Density and Land use / Land cover were considered in this study. Selected seven thematic layers and their features were assigned suitable weights on the Saaty’s scale according to their virtual significance in groundwater incidence. The assigned weights of the thematic layers and their features were then normalized by using AHP. Finally, the selected seven thematic maps were incorporated by weighted linear combination method in a GIS environment to produce a groundwater target map.

Abstract

The groundwater behaviour in hard rock aquifer systems has always remained enigmatic owing to the heterogeneity of the aquifer systems. This is the reason why there are a lot of failures in groundwater targeting and management in hard rock aquifer systems even after the employment of many modern technologies. For precise groundwater targeting in hard rock aquifer systems various parameters like lithology, the type and the degree of structural deformation, the degree of weathering, geomorphology, etc., will have to be analysed which involves spatial analysis of voluminous data. In the sphere of spatial modelling, GIS plays an important role. Hence, a newer study has been carried out in parts of Madurai, Dindigul and Theni districts, Tamil Nadu, to identify the groundwater provinces and their functions using GIS. In the said study, GIS images were generated on the groundwater targets through GIS integration of transmissivity, permeability, storage co-efficient and water level. Such GIS image showing groundwater maxima was overlaid with GIS image of fracture maxima, subsurface geology maxima and the geomorphology maxima and thus by various GIS based spatial manipulations, aquifers controlled by structure, geomorphology, subsurface geology, and combinations of the above various variables were brought out. This has provided potential method for precise targeting of groundwater.

Abstract

The groundwater targeting in hard rock aquifer systems is complex, because of the heterogeneity of the aquifer systems. The ground water mobility and stability in such aquifer systems varies because of the lithology, folded structures, fracture density, geomorphology, slope etc., These occur in various permutations and combinations and control the overall water holding and conducting capacity in different parts of the aquifer systems. Hence, one needs to analyse all the data so as to understand and bring out precise spatial models on the groundwater probability in hard rock aquifer systems. In the present study, the authors have carried out GIS based appraisals to understand the relation between the lithology and groundwater movement in hard rock aquifer systems of parts of Central Tamil Nadu covering 1300 sq.km. In the said study, GIS images were generated on the maxima zones of various aquifer parameters such as water level, width of aquifer depletion, transmissivity, permeability, specific capacity, storage co-efficient, optimum yield and recovery rate. These were overlaid with the lithology GIS image. Such an analysis has shown that, in general, the fissile hornblende biotite gneiss appears to have some control over the groundwater systems.

Abstract

It is evident from the previous studies that, in the crystalline terrain, the Fractures / lineaments act as master conduits for the groundwater movements and also act as favorable loci for groundwater storage. Because of this, the mapping of fracture patterns has become very popular among geoscientists. However, after witnessing failures and the fractures turned out to be water barren at many instances, geoscientists have started concentrating more on understanding the origin and the morphology of the fractures for precise groundwater targeting. In this context, a study has been conducted in parts of Western Ghats in Madurai, Dindigul and Theni districts of Tamil Nadu, South India, using remote sensing and geographic information system (GIS). In the said study, the maxima zones of transmissivity were studied in relation to fractures systems, which are normally reflected as lineaments in satellite images in the area. This study in general indicates that the transmissivity is controlled by the fractures, which are interestingly the active faults of the Quaternary period in the area.

Abstract

The development index and the developmental planning of a Country/Nation mostly depend on its natural resources potential including water resources. The fast emerging Remote Sensing and GIS technology has substantially reduced the problems of water resources management including groundwater. The groundwater is distinctly controlled by western crystallines, central Tertiary sandstone and eastern Quaternary sediments in Pudukkottai district. While the groundwater behavior in crystallines is dominantly controlled by secondary porosity, in Tertiary formations and Quaternary sediments, it is controlled primarily by the primary porosity and by secondary porosities also if these are structurally deformed.

Abstract

Water has become a scarce resource all over the World. Water resources of Earth can be classified as surface water and groundwater in which groundwater is the main source for the drinking, domestic and agriculture. The Pudukkottai district is one of the chronic drought prone areas in Tamil Nadu. But, at the same time, the district is pitted with over 5,400 tanks/water bodies widely distributed throughout in general and clustered more in Vellar delta in particular, as the interlobel depressions have provided basic depressions for the surface water to accumulate. However, these surface water bodies are heavily silted. In Pudukkottai district, there are three divergent aquifer systems, hard rock aquifer system in the western, sedimentary aquifer system constituted by the Tertiary Sandstone (Cuddalore Sandstone) in the central and Quaternary aquifer system constituted by fluvial, fluvio-marine and marine systems in the eastern parts of the district.

Abstract

The paper presents an approach of selecting suitable areas for artificial groundwater recharge structures through remote sensing and integrated terrain analysis by statistical method. The study area “Ayyar basin” is an aquifer system of gneisses and charnockite litho-units in Tiruchirappalli district, Tamil Nadu. The area has witnessed a steady decline in groundwater table. Hence, the scope for artificial groundwater recharge was studied in this area with the help of Tamil Nadu State Council for Science and Technology (TNSCS&T).

India is famous as the ‘Land of Spices’ world over. Spices are nature’s gift to humankind for flavoring our food. They are also used as preservative and in pharmaceuticals. India is the largest producer, consumer and exporter of seed spices and their value added products. About 63 different spice crops are cultivated in the country. Among them, seed spices are annual herbs, whose dried seeds or fruits are used as spices. These crops share 21.87% in terms of quantity and 7.42 % in terms of value to total spices export in the country. The country grows a wide variety of seed spices like coriander, cumin, fenugreek and fennel as major crop, while, dill, nigella, ajwain, anise, celery, caraway, parsley, black cumin and few other are categories as the minor seed spices.

Notified Varieties of Different Seed Spices

Seed
The seed, in botany is a mature ovule, consisting of an embryo together with a store of food all surrounded by a protective coat and bear ability to develop a new plant on optimum conditions of soil, moisture and light. It usually develops after the fertilization on an egg cell by male generative cell from a pollen grain. Seeds of some species develop without the intervention of the male cell, formed entirely of ‘mother’ tissue. Such seeds are called apogamic seeds. In seed technology, the seed is seed or any vegetatively propagated material produced from seed crop in accordance to Indian seed standards and has potential to develop new crop in presence of soil, moisture and light.

Seed Sampling

The size and quantity of seed sample required for seed quality testing remains small as compared to the seed lot hence, representative samples are randomly drawn for this purpose. The process of obtaining a uniform and representative sample from a seed lot for seed quality testing is called seed sampling. The samples are prepared in accordance to ISTA rules to ensure that small size sample should represent truly and in the same proportion all constituents of seed lot.

1. Isolation distance

Physical purity test determines the proportion of pure seed, other crop seed, weed seed, inert matter, moisture and germination components in the seed lot by weight in percentage in accordance to prescribed Seed Standards. It thus, helps in improving the plant stand, raising a pure crop by eliminating other crop seeds, weed seeds and disease free-seeds. Seed must not be sold until the percentage of pure seed, other crop seed, weed seed, and inert matter are in accordance to seed physical purity standards. Physical purity test is required for seed certification or seed law enforcement and it is a pre-requisite for ger- mination test.

Seed Germination Test

Germination is the process of emergence and development of seed embryo into a plant under favourable environmental conditions of water, soil, sunlight and temperature. The best example of germination is the sprouting of a seedling from a seed of an angiosperm plant. It reflects the ability of seed to produce a normal plant under favourable environmental conditions. The germination rate of a particular seed lot is a key indicator of its performance in the field.

Seed Viability Test

Germination test for a seed lot is a pre-requisite to know its potential of emergence under field condition. However, this test requires few days to weeks and a month in some cases. Tetrazolium test gives quick information on seed viability or germinability. It makes possible to distinguish red coloured living parts of seeds from the colourless dead ones. Staining of seeds determines  viability.  Completely  stained  seeds  are  viable  while,  partially and comparatively unstained seeds are non-viable. This test is not valid as compared to seed germination test.

The seed moisture content is the amount of water present in the seed. It is generally expressed in percentage of dry and wet seed weight. It is the loss in weight of the original sample when it is dried. High moisture content in seed sample favors the mechanical damage, seed longevity, incidence of disease and insect pests.

Objective

i. To know the moisture content of seeds by suitable methods
ii. To suggest the seed drying.

Seed storage is the preservation of viable seeds from the time of collection to the required for sowing. It is important to get adequate plant stands in addition to healthy and vigourous plants.

Objectives

i. To maintain initial seed quality during storage period by providing suitable conditions.

ii. To maintain the seed germination and emergence rates.

iii. To prevent the seed deterioration during storage period.

iv. To maintain the physical and physiological seed qualities.

Mini seed testing lab analytical register

Climate change and variability are concerns of humankind. The recurrent drought and desertification threaten seriously the livelihood of over 1.2 billion people who depend on land for most of their needs. The global economy has adversely been influenced due to droughts and floods, cold and heat waves, forest fires, landslips and mudslips, icestorms, duststorms, hailstorms, thunder clouds associated with lightning and the sea level rise (Fig. 1). The year 1998 was the warmest and declared as the weather related disaster year, which caused hurricane havoc in Central America and floods in China, India and Bangladesh. Canada and New England in the U.S suffered heavily due to icestorm in January while Turkey, Argentina and Paraguay with floods in June 1998. In contrast, huge crop losses were noticed in Maharashtra (India) due to unseasonal and poor distribution of rainfall during 1997-98. The 1997/1998 El Nino event, the strongest of the last century affected 110 million people and costed the global economy nearly US$ 100 billion. A string of 16 consecutive months saw record high global mean temperature in 1997-98.

1. Introduction
 
The bryophytes are found everywhere in the world except in the sea. They grow on wet soil or rock, the trunk of trees, in lake, river and even in Antarctic island. The bryophytes are placed taxonomically between algae (Fig. 1) and pteridophytes (Fig. 2); there are about 24,000 species in the world. They are further divided into three phyla, Bryophyta (mosses 14,000 species, Fig. 3), Marchantiophyta (liverworts 6,000 species, Fig.4a,b) and Anthocerotophyta (hornworts 300 species, Fig. 5). They are considered to be the oldest terrestrial plants, although no strong scientific evidence for this has appeared in the literature. This hypothesis was mainly based on the resemblance of the present-day liverworts to the first land plant fossils, the spores of which date back to almost 500 million years. Among the bryophytes almost all liverworts possess beautiful cellular oil bodies (Fig. 6) which are peculiar, membrane-bound cell organelles which consist of ethereal terpenoids and aromatic oils suspended in carbohydrates- or protein-rich matrix, while the other two phyla do not. These oil bodies are very important biological markers for the taxonomy in the Marchantiophyta (Asakawa, 1982, 1995; Asakawa et al., 1979b, 2008c, 2012b, 2013a,b; Asakawa and Ludwiczuk, 2008a,b; Ludwiczuk and Asakawa, 2010).

Halophytes are salt-resistant or salt-tolerant plants which thrive and complete their life cycles in terrestrial or aquatic habitats having high salt concentrations. Aronson (1989) compiled a partial list of halophytes containing 1560 species in 550 genera and 117 families. Menzel and Lieth (1999) listed as many as 2600 plants under salt tolerant flora. Although halophytes represent only 2% of terrestrial plant species, they are present in about half the higher plant families and represent a wide diversity of plant forms. Because of their diversity, halophytes are regarded as a rich source of potential new crops. Halophytes are tested as vegetables, fodder and oilseed crops under field trials. The oilseed halophyte, Salicornia bigelovii, yields 2 tones/ha of seed containing 28% oil and 31% protein, similar to soybean yield and seed quality.