eChapters

Introduction
Aquaculture has grown into a significant business and is the fastest-growing agricultural production sector in the world, taking new, intense, and diverse directions (Villa-cruz et al., 2009). Aquaculture has experienced intensification in recent years attributable to escalating stocking densities and excessive feed utilization, which have imposed stress on aquatic organisms and ultimately inhibited their growth and immune functionality. Chemotherapy remains a principal approach for the treatment and prevention of aquatic diseases. Nevertheless, a plethora of scholarly articles have indicated that chemical therapeutics exert adverse effects on both human health and ecological systems. The aquatic environment is adversely affected by antibiotics and their residuals, as a significant proportion of bacterial strains are developing resistance to these pharmaceuticals within the ecosystem. Consequently, there has been a concerted emphasis on the exploration of environmentallysustainable alternatives (Kumar et al., 2020). The public increasingly recommend natural compounds, while the utilization of synthetic chemicals, hormones, and antibiotics is increasingly becoming impractical owing to consumer apprehensions and stringent regulatory frameworks in numerous nations (Chakarborty et al., 2014).
Phytobiotics can be conceptualized as products originating from plants that are incorporated into animal feed to optimize performance in aquatic species. Predominantly, leaves, roots, tubers, or fruits of various herbs, spices, and other botanical sources may be utilized as phytobiotics (Arts and Hollman, 2005). These substances are typically employed to promote enhanced growth performance in the cultivation of shrimp and fish. Based on their processing characteristics, phytobiotics are divided into categories:

Metabolites are small molecules generated or utilized during cellular metabolism and include amino acids, carbohydrates, lipids, organic acids, nucleotides, vitamins, hormones, and secondary metabolites. This chapter introduces the major classes of metabolites and their biological significance. It explains metabolic architecture as the organization and interaction of interconnected biochemical pathways that regulate cellular energy production, biosynthesis, degradation, signaling, and adaptation. The chapter describes primary and secondary metabolites and examines central metabolic pathways and their interrelationships. Understanding metabolic architecture provides the foundation for interpreting metabolomic profiles and identifying changes associated with physiological conditions, environmental stresses, disease processes, and alterations in cellular metabolic regulation.

Introduction

The major environmental issue of global nature is increasing green house effect, which is warming earth. Enhanced green house effect is mainly due to increased emission of carbon dioxide, methane, nitrous oxide and CFCs. Because of the increasing concentrations of these greenhouse gases, there is much concern about future changes in our climate and direct or indirect effect on agriculture (Arora et al. 2011). Increases in atmospheric concentrations of green house gases and additional anthropogenic perturbations of the climate system affect the spatial and temporal distribution of weather regimes which contribute to shaping the diversity of agricultural activities throughout the world (Havlik et al. 2015). Consequences of changing climatic attributes such as rainfall, moisture regimes, temperature etc. affect qualitative and quantitative production of agricultural crops as well as livestock population by altering pasture quality and yield (Thornton et al. 2009). In the context of climate change mitigation, now a days adoption of climate smart agriculture work as an effective practice.

Plant diseases are a threat to world agriculture. Significant yield losses due to the attack of pathogen occur in most of the agricultural and horticultural crop species. More than 70% of all major crop diseases are caused by fungi . Plant diseases are usually handled with applications of chemicals. For some diseases, chemical control is very effective; but it is often non-specific in its effects, killing beneficial organisms as well as pathogens. Chemical control may have undesirable effects on health, safety and cause environmental risks. A promising method for protecting plants against diseases is constructing and employing pathogen-resistant cultivars. Although a number of resistant cultivars have been developed through breeding programs, these cultivars become obsolete in a short time due to the rapid evolution of the phytopathogens and the emergence of virulent forms capable to overcome the plant resistance. Breeders are often confronted with the issue of using a limited number of plants in their breeding programs, undesirable traits transferred together with the valuable resistance genes, and, in recent years, also with the depletion of potential gene sources. Control of diseases is a subject of great interest for biotechnologists. The most significant development in the area of varietal development for disease resistance is the use of the techniques of gene isolation and genetic transformation to develop transgenic resistance to fungal, bacterial and viral diseases. Improvements in genetic transformation technology have allowed the genetic modification of almost all important food crops like rice, wheat, maize, mustard, pulses and fruits. Genetic engineering technology has proved to be beneficial in managing viral and bacterial diseases in plants. The advances in gene engineering technologies and the understanding of the molecular nature of plant protection mechanisms have provided means for developing principally new strategies of plant disease control, in addition to the traditional approaches based on employing chemicals or classical breeding schemes. Biotechnology will enhance our understanding of the mechanisms that control plant’s ability to recognize and defend itself against disease caused by fungi. The integration of biotechnology with traditional agricultural practices will be the backbone for sustainable agriculture.

ABSTRACT

Benthic fishes represent a significant component of riffle communities. Our 10 year study on two benthic fishes, Crossostoma lacustre and Rhinogobius candidianus which are sympatric in Hapen Creek, Northern Taiwan, reveals that these species exhibited mesohabitat overlaps but were segregated at the microhabitat levels. Both species preferred riffles and avoided rocks. Heavy flow (typhoons) had an inhibitory effect on the fish densities. The fishes may not be able to swim against the strong currents and might get carried away downstream. The recovery time (number of days after a peak, when the densities were restored to normalcy) for C. lacustre was = 13 days and for R. candidianus, it was = 16 days. Recovery was faster at the downstream (~13-15 days) as opposed to upstream (~1416 days). Direct estimation of the linkage between the hydrological or geomorphological variables and the well being of fish populations is one of the first steps in formulating an efficient, effective conservation plan or restoration strategy to preserve these species for the future.

Abstract

Global consumption of wheat during 2021/2022 marketing year reached to 787.4 million metric tons (https://www.statista.com/aboutus/our-researchcommitment/1239/m-shahbandeh). It shows about 4.4 million metric tons increase from the previous year. With the increase in population a significant increase in wheat production is needed to feed 9.7 billion mouths by 2050. A very limited effort can be directed to increase area under wheat production. Diseases and pests of wheat cause significant reduction (>30%) in production and 11-15% of total post-harvest losses of food grains were reported in India, which equates to about 20 million tonne (Basavaraja et al. 2007) and more than AUD10 million per year (Singh 2010). Thus, saving wheat from diseases can significantly contribute to the 2050 food security goal.

Introduction

The emergence of the green revolution highlighted the significance of agricultural communication. Its strategy and attitude were modified to reflect the priorities of contemporary agriculture. Earlier attempts at agricultural journalism drew their power mostly from agricultural extension rather than journalism or mass communication. The primary objective was to provide farmers with a collection of techniques authored by scientists or subject matter experts about a variety of crops. Due to the lack of synergy between journalism and extension, agricultural journalism stalled for many years..

9.1. Classification: Order Perissodactyla

The order Perissodactyla, also known as odd-toed ungulates, is a group of herbivorous mammals characterized by having one or three toes on each foot. They are distinguished from even-toed ungulates (Artiodactyla) by this anatomical feature. Even-toed ungulates, such as pigs, cows, and deer, have an even number of toes (two or four) on each foot. Some of the well-known members of this order include horses, zebras, asses, tapirs, and rhinoceroses.

The name “Perissodactyla” comes from the Greek words “perissos,” meaning “odd,” and “daktylos,” meaning “finger or toe,” referring to their unique foot structure. Unlike even-toed ungulates (Artiodactyla), which bear weight on their third and fourth toes, perissodactyls primarily bear weight on their third toe.

Artificial Intelligence (AI) technology is increasingly used in our everyday lives. It is used in a variety of industries from gaming, journalism/media, to finance, as well as in the research fields from water resources to robotics. In this chapter concept and applications of AI are discussed in brief.

6.1 Historical Background

After World War II, a number of people worked independently on intelligent machines. The English mathematician Alan Turing was the first who explained the concept of intelligent machines through a lecture in 1947. He stated that intelligent machines could be developed by programming computers rather than by building machines. Since late 1950 many researchers are working on intelligent machines, mostly on programming computers

1.    Entrance Gate
    
2.    Garden Walls
    
3.    Dry Wall
    
4.    Green Wall
    
5.    Fences
    
6.    Steps
    
7.    Garden Drives
    
8.    Garden Paths
    
9.    Hedge
    
10.    Edging
    
11.    Shrubbery
    
12.    Herbaceous Border
    
13.    Flower Beds
    
14.    Carpet Bedding
    
15.    Ground Covers
    
16.    Topiary
    
17.    Creating Shapes
    
18.    Lawn
    
19.    Arches
    
20.    Pergolas
    
21.    Bridges
    
22.    Gazebo
    
23.    Vertical Garden
    
24.    Roof Gardening
    
25.    Planning
    
26.    Plant Materials Suitable for Roof Gardening
    
27.    Terrace Gardening
    
28.    Planting
    
29.    Water Graden
    
30.    Plants for Water Garden
    
31.    Rock Garden
    
32.    Plants Suitable for a Rock Garden
    
33.    Healing Garden
    
34.    Clock Garden
    
35.    Greenhouse
    
36.    Garden Adornments
    
    
References

1. INTRODUCTION

Growth is a complex biological process that must be evaluated carefully if a profitable combination of growth and efficiency is to be realized. Knowledge relating to birth weight, mature weight, maturity rate and the point of infection of the growth curve in various breeds and crosses is very useful in selecting breed combinations that can produce the most efficient growth pattern. The effect of cow size on economy of production has been a discussing subject among cattlemen and animal scientists. Growth models are used to predict rates and change in the shape of the organism. They can be applied to determine the food requirements so as to get a desired growth. The estimated parameters of growth function can evaluate various growth characteristics of animal like rate of maturing, rate of gain, mature size and related characters.

Appendix - 1

Differential Diagnosis of Poisons based on Clinical Signs

Introduction

Since the last century, nutritional science has made a remarkable contribution to the biological sciences through identification of diverse nutrients and their sources, functions, requirement, deficiency symptoms and their remedial measures etc. The advent of high-throughput sequencing technologies together with bioinformatic tools identified the presence of 100 trillion of microorganism belonging to all forms of life in the gastrointestinal tract. In fact, the whole gut microbial consortia are considered as a virtual organ in human and animals and is responsible for the development and functioning of series of essential physiological activities including digestion, absorption, metabolism, immunity, homeostasis, brain and gut development, resistance against disease etc. According to the modern scientific dogma, the human being is in fact a “Superorganism”, carrying consortium of numerous symbiotic Eukarya, Bacteria, Archaea and Viruses. The gut microflora has been co-evolved with human and presumed to maintain an intricate balance among different microbial communities. Upon introspection about the functionality of the gut microflora, it is amply clear that a few of these microorganisms have the ability to make healthy state; while other members are responsible for health-related problems including food poisoning, diarrhoea, abdominal pain, indigestion, inflammatory bowel disease, predisposition to colon cancer, compromising immunity, allergy etc.

Marjoram is native of Southern Europe. It grows in West Asia, South and North America, France, Germany, Hungary, Spain, Portugal, England and North Africa. It is an important kitchen herb and its dried leaves with or without flowering tops in small proportion constitute the spice of commerce. In India, the crop finds its cultivation only in small scale in Karnataka, Andhra Pradesh and Tamil Nadu. France and Egypt are the main exporters of marjoram oil in the world.

Botany and chemical composition

Marjorana hortensis is an aromatic branched perennial, 30-60 cm high. Though a perennial, it is treated as an annual under cultivation. Main stem is woody with many softer branches. Leaves are round, soft, mat green and with a marvelous sweet smell. Flowers small, whitish or purplish in terminal clusters, seeds minute, oval and dark brown in colour.

Introduction

India is bestowed with diverse agro-climatic conditions which favour the production of a variety of fruit crops. At present India is second largest producer of fruits in the world after China. Fruit culture can be highly profitable by increasing employment opportunities and commercialization of the rural sector. During early sixties, priority was to achieving self sufficiency in food grain production in our country, however, over the years, fruit culture has emerged as an indispensable part of agriculture, offering a wide range of choices to the farmers for crop diversification. It also provides ample opportunities for sustaining large number of agro-industries to generate substantial employment opportunities (Bardhan, 2016). Amongst various tropical and sub-tropical fruit crops grown in India, guava, pomegranate, acid lime, sweet orange and mandarins, if left on its own, give several light crops of the variable quantities and qualities from the various flowering flushes throughout the year. Under natural conditions, these crops produce flowers thrice in a year i.e. February-March (Ambe Bahar), June-July (Mrig Bahar) and October-November (Hasth Bahar) with the corresponding harvest during rainy, winter and spring season, respectively (Boora et al., 2016, Lal et al., 2017). Owing to this, potential yield is not obtained during the desired period. Therefore, to obtain higher fruit yield during a particular period, these fruit crops are given a resting period with artificial means so that the natural flowering tendency of the trees is altered. It can be achieved through root exposure and its pruning (Boora et al., 2016), shoot pruning (Tiwari et al., 1992, Thakre et al., 2016)

Introduction

As the most of the conventional resources are depleting and can last only for about a few 30 to 50 years. Scientists worldwide are looking for alternative energy resources and they have come to an agreement that solar energy can provide much of our energy needs in the future. The major challenge before them is to store this energy. The radiation falling on the earth surface can be tapped and stored in no of ways. However, the most efficient way is done through the latent heat storage through PCM. The PCM has many added advantages i.e. high energy density, isothermal behavior, non-polluting and low cost. Nowadays, it gaining popularity worldwide and now seen as the most efficient way of thermal energy storage. There is a large number of PCM at use i.e. organic, inorganic, eutectic and salt hydrates. Their utilization depends on the user’s requirement technological constraints. They also serve the purpose of energy availability at night beside the uninterrupted supply during the day. They are seen as the materials for ensuring the environmental sustainability

Cattle Breeding Policies and Programmes in the Planning Process

It is necessary to see how the issues relating to Cattle Breeding have been dealt with in the successive Plan periods starting from the First Five Year Plan. It is seen that, while the issue of surplus cattle has been handled in different ways in the various Plan documents, some discussing this issue at great length and other remaining completely silent on the subject, other issues such as cattle development, genetic improvement and breeding etc., have also received varying degrees of emphasis in the different Plans. 

Introduction

Expert system can be defined as a tool for information generation from knowledge. Information is either found in various forms or generated from data and/or knowledge. Text, images, video, audio are forms of media on which information can be found, and the role of information technology is to invent, and devise tools to store and retrieve this information. Statistical information is a good example of information generated from data while advises generated by an expert system is a good example of information generated from knowledge.

At the beginning, the concentration was mainly on textual information. Information technology used for textual information ranged from paper archiving tool to the sophisticated electronic computer software tools such as data base management systems, and hypertext tools. Images were very difficult to be included in an information system just few years ago till the scanners technology has been advanced together with the invention of the optical storage devises which have the capacity to store hundreds of mega bytes. This technology has enabled the developers to include images in their systems. Input peripherals to capture video and audio information have been also commercialized and are now available in the market. Storage of audio and video would be impossible unless large storage media were invented.

The present study was carried out on gross anatomical and morphometrical studies of extensor and flexor muscles of digits of forelimb and hind limb in six adults non-descript dogs irrespective of sex. Common digital extensor muscle was originated from the lateral (extensor) epicondyle of the humerus with multiple tendons of insertion whereas lateral digital extensor was originated from the lateral ligament of the elbow joint. Extensor pollicis longus and indicisproprius muscle was present under the lateral digital extensor and superficial to the abductor pollicis longus and originated from the middle third of the dorsolateral border of the ulna. Deep digital flexor muscle was comprised of two heads, flexor hallucis longus, and flexor digitorum longus.The average tensile strength for common digital extensor, lateral digital extensor, extensor pollicis longus and indicisproprius, and abductor pollicis longus muscles were 2.65 ± 0.36 kg, 2.20 ± 0.47 kg, 1.60 ± 0.38 kg and 1.95 ± 0.35 kg respectively. Mean Muscle belly length for common digital extensor, lateral digital extensor, extensor pollicis longus and indicisproprius, and abductor pollicis longus muscles was 8.30 ± 0.51 cm, 6.68 ± 0.45 cm, 4.80 ± 0.68 cm and 8.08 ± 0.73cm respectively. Mean tensile rest strength for the superficial digital flexor, deep digital flexor, interosseous muscle, f lexor pollicis brevis and lumbricales was 7.61 ± 0.56 cm, 8.53 ± 0.51 cm, 2.76 ± 0.47 cm, 0.73 ± 0.13 cm and 0.85 ± 0.17 cm respectively. Mean muscle belly volume of superficial digital flexor, deep digital flexor, interosseous muscle, flexor pollicis brevis, and lumbricales muscles was 6.61 ± 0.72 cm3, 7.84 ± 0.53 cm3, 0.24 ± 0.07 cm3, 0.03 ± 0.01 cm3, 0.02 ± 0.00 cm3 respectively.Mean tendon cross section area for muscles tibialiscranialis, long digital extensor, lateral digital extensor, and extensor digitorum brevis was 0.05 ± 0.00 cm2, 0.06 ± 0.00 cm2, 0.04 ± 0.00 cm2 and 0.04 ± 0.00 cm2 respectively.