eChapters

    Q.1.    What is the cause of mastitis in non-lactating mare?
    Ans.    Mastitis may develop in a non-lactating mare due to abnormally high estrogen levels in her system. This excess female hormone can result from a pituitary gland tumor or consumption of high estrogen containing hay. High estrogen concentrations can cause mammary gland enlargement and trigger the production and secretion of milk, even though the mare is not pregnant and has not foaled. If the non-lactating mare begins to secrete milk due to excess estrogen, she may become a candidate for mastitis.

    Q.2.    Why equine mammary glands are less prone to mastitis than bovines?
    Ans.    The possible reasons are as follows:
    a)    Mammary glands are relatively smaller in size
    b)    Concealed position of the glands
    c)    Small milk capacity of the glands
    d)    Greater resistance to infection in equine mammary glands because of differences in endocrine environment and local immunity

    Q.1.    How mastitis occurs in dogs? 
    Ans.    Mastitis in dogs initiates with the infection in the milk ducts of the dogs, where in the dog’s breast is enlarged as well as milk duct is blocked. The skin around the nipple might get cracked which might give a way to bacteria. In neglected cases it leads to cause gangrenous mastitis which is a severe form of mastitis in dogs.

    Q.2.    What are common pathogens responsible for mastitis in bitch?
    Ans.    Staphylococcus spp., Streptococcus spp. and Escherichia coli.
 
    Q.3.    What are the characteristic features of milk cytology during mastitis in bitch?
    Ans.    Milk cytology will show the presence of erythrocytes, degenerated neutrophils and bacterial agents.

    Q.4.    What characteristic physical changes of milk are seen during mastitis in bitch?
    Ans.    The viscosity of milk is increased and the colour of milk will be yellow to brown depending on the amount of blood and purulent exudates present.

    Q.1.    What are the common infectious diseases affect teat skin of mammary gland?
    Ans.    The common infectious diseases that affect teat skin of mammary gland are cowpox, buffalopox, pseudocowpox, bovine ulcerative mammillitis, black pox, foot and mouth disease, vesicular exanthema, swine vesicular diseases, contagious exanthyma, Staphylococcus sp., Pasteurella sp etc.

    Q.2.    What is thelitis?
    Ans.    Thelitis is the inflammation of tissues of teat wall caused by traumatic injury to the teat cistern. It is generally manifested with gangrenous mastitis.

    Q.3.    What is the main etiology of gangrenous mastitis?
    Ans.    Staphylococcus aureus

    Q.4.    What are the causes of coming blood in milk and mentions its treatment?

1. California mastitis test

The California mastitis test (CMT) is conducted during milking of lactating cows. The CMT paddle is used to collect about three to four ml of fore milk from each quarter of cows after discarding few streams to which an equal volume of CMT reagent (composition mentioned below) is mixed immediately by circular motion (Fig. 1). The reaction is graded by intensity of gel formation and color changes as follows:

Introduction
Remote sensing is the art and science of recording, measuring, and analyzing information about a phenomenon from a distance. Humans with the aid of their eyes, noses, and ears are constantly seeing, smelling, and hearing things from a distance as they move through an environment. Thus, humans are naturally designed to be remote sensors. In order to study large areas of the Earth’s surface geographers use devices known as remote sensors. These sensors are mounted on platforms such as helicopters, planes, and satellites that make it possible for the sensors to observe the Earth from above.

Definition
Remote sensing can be defined as any process whereby information is gathered about an object, area or phenomenon without being in contact with it. Our eyes are an excellent example of a remote sensing device. We are able to gather information about our surroundings by gauging the amount and nature of the reflectance of visible light energy from some external source (such as the sun or a light bulb) as it reflects off objects in our field of view. Contrast this with a thermometer, which must be in contact with the phenomenon it measures, and thus is not a remote sensing device.

Introduction

Although both maps and aerial photos present a “bird’s-eye” view of the earth, aerial photographs are NOT maps. Maps are orthogonal representations of the earth’s surface, meaning that they are directionally and geometrically accurate (at least within the limitations imposed by projecting a 3-dimensional object onto 2 dimensions). Aerial photos, on the other hand, display a high degree of radial distortion. That is, the topography is distorted, and until corrections are made for the distortion, measurements made from a photograph are not accurate. Nevertheless, aerial photographs are a powerful tool for studying the earth’s environment. 

Because most GISs can correct for radial distortion, aerial photographs are an excellent data source for many types of projects, especially those that require spatial data from the same location at periodic intervals over a length of time. Typical applications include land use surveys and habitat analysis. 

This unit discusses benefits of aerial photography, applications, the different types of photography, and the integration of aerial photographs into GISs.

Digital image processing is the use of computer algorithms to perform image processing on digital images. As a subcategory or field of digital signal processing, digital image processing has many advantages over analog image processing. It allows a much wider range of algorithms to be applied to the input data and can avoid problems such as the buildup of noise and signal distortion during processing. Since images are defined over two dimensions (perhaps more) digital image processing may be modeled in the form of multidimensional systems. Introduction to image processing 
Image processing is a method to convert an image into digital form and perform some operations on it, in order to get an enhanced image or to extract some useful information from it. It is a type of signal dispensation in which input is image, like video frame or photograph and output may be image or characteristics associated with that image. Usually image processing system includes treating images as two dimensional signals while applying already set signal processing methods to them.
Image processing is a method to perform some operations on an image, in order to get an enhanced image or to extract some useful information from it. It is a type of signal processing in which input is an image and output may be image or characteristics/features associated with that image. Now-a-days, image processing is among rapidly growing technologies. It forms core research area within engineering and computer science disciplines too.

Introduction

The Global Positioning System (GPS) is a space-based navigation system that provides location and time information in all weather conditions, anywhere on or near the Earth where there is an unobstructed line of sight to four or more GPS satellites. The system provides critical capabilities to military, civil, and commercial users around the world. The United States government created the system, maintains it, and makes it freely accessible to anyone with a GPS receiver. The US began the GPS project in 1973 to overcome the limitations of previous navigation systems, integrating ideas from several predecessors, including a number of classified engineering design studies from the 1960s. The U.S. Department of Defense (DoD) developed the system, which originally used 24 satellites. It became fully operational in 1995. Roger L. Easton, Ivan A. Getting and Bradford Parkinson of the Applied Physics Laboratory are credited with inventing it.
 
Advances in technology and new demands on the existing system have now led to efforts to modernize the GPS and implement the next generation of GPS Block IIIA satellites and Next Generation Operational Control System (OCX). Announcements from Vice President Al Gore and the White House in 1998 initiated these changes. In 2000, the U.S. Congress authorized the modernization effort, GPS III. In addition to GPS, other systems are in use or under development. The Russian Global Navigation Satellite System (GLONASS) was developed contem-poraneously with GPS, but suffered from incomplete coverage of the globe until the mid-2000s. There are also the planned European Union Galileo positioning system, China’s BeiDou Navigation Satellite System, the Japanese Quasi-Zenith Satellite System, and India’s Indian Regional Navigation Satellite System.

Introduction

A geographic information system or geographical information system (GIS) is a system designed to capture, store, manipulate, analyze, manage, and present all types of spatial or geographical data. The acronym GIS is sometimes used for geographic information science (GIScience) to refer to the academic discipline that studies geographic information systems and is a large domain within the broader academic discipline of geoinformatics. What goes beyond a GIS is a spatial data infrastructure, a concept that has no such restrictive boundaries. In a general sense, the term describes any information system that integrates stores, edits, analyzes, shares, and displays geographic information. GIS applications are tools that allow users to create interactive queries (user-created searches), analyze spatial information, edit data in maps, and present the results of all these operations. Geographic information science is the science underlying geographic concepts, applications, and systems.

GIS is a broad term that can refer to a number of different technologies, processes, and methods. It is attached to many operations and has many applications related to engineering, planning, management, transport/logistics, insurance, telecommunications, and business. For that reason, GIS and location intelligence applications can be the foundation for many location-enabled services that rely on analysis and visualization. GIS can relate unrelated information by using location as the key index variable. Locations or extents in the Earth space–time may be recorded as dates/times of occurrence, and x, y, and z coordinates representing, longitude, latitude, and elevation, respectively. All Earth-based spatial–temporal location and extent references should, ideally, be relatable to one another and ultimately to a “real” physical location or extent. This key characteristic of GIS has begun to open new avenues of scientific inquiry.

Applications of Remote Sensing

The era of satellite remote sensing was open in the 1960s when cameras and electronic sensors were mounted on spacecraft. Nowadays there is a big assortment of satellite systems actively recording information about the Earth. A wide variety of imagery is available from satellites. Both active and passive sensors, operating from the microwave to the ultraviolet regions of the electromagnetic spectrum collect a large amount of information about the earth’s surface every day. Each of the systems vary in terms of their spatial, spectral, radiometic and temporal resolution. Those characteristics play an important role in defining which applications the sensor is best suited for. The main benefits of satellite remote sensing are the following:

SENSORY EVALUATION OF FOOD

When the quality of a food is judged or evaluated by the senses (taste, smell, sight, touch and hearing), it is said to be a sensory evaluation. Since food is prepared for the primary purpose of being eaten and enjoyed through the senses, sensory evaluation is most appropriate. No machine has yet been devised that can totally substitute for the human senses in evaluating the quality of human food. However, the human instrument used in sensory evaluation is very complex and many problems need to be managed as data are collected and analysed. Computers are generally used to analyse data from sensory evaluations and may also be used to collect information firsthand.

Flavour perceptions are difficult to characterise verbally, for example, think about how a strawberry tastes, then try to describe it some one else. In food research small groups of trained individuals called juding panels or sensory panels are commonly used to determine differences among food samples. These panels often consist of from 5 to 15 individuals who have had training and experience in testing the particular food products being evaluated.

INTRODUCTION

COLLOIDS :  The word colloids has actually been derived from Greek language where it means glue like. The science of colloids was founded about 1861 when Thomas Graham published a summary of his work on the diffusion of substances in solution. He classified substances into two groups, viz: crystalloids and colloids, depending on their ability to diffuse through parchment membrane. According to Graham, crystalloids readily passed through parchment membranes while colloids did not. According to modern concept, colloidal solution contain substances whose molecular aggregates possess a diameter greater than 1 mu  and less than 100 mu. If the particle size is greater than 100 mu, a suspension is obtained (Table 1).

CARBOHYDRATES AND SUGARS

Carbohydrates which include sugars and starches are among the most important of the food stuffs as well as the simplest of organic foods. They may be divided into three groups.

Group – I

Monosaccharides  : These are simple sugars that cannot be split into any simpler forms. The principal ones are glucose or dextrose, fructose and galactose. Glucose sometimes known as dextrose or grape sugar is found widely distributed in nature, especially in fruits and vegetables, and is one of the main constuents of honey.

It is in the form of glucose that sugar appears in the blood and is being burned continuously to produce energy. A certain amount of surplus glucose is absorbed from the digestive tract and stored in the liver as glycogen, which can be converted back into glucose when the need for more fuel arises. In the presence of yeasts, glucose undergoes fermentation and changes into alcohol.

STARCH : Starch is a complex carbohydrate that has been cursed by dieters in years past, but that now is praised by nutritionists as a particularly healthful source of energy. In food preparation at home starch is a very important as a thickening agent. However starch is but one of several polysaccharides that are used as thickners in the food industry.

STRUCTURE : Although starch is the name used by nutritionists this complex carbohydrate actually consists of two fractions amylose and amylopectin. The two fractions occur together in starch from most sources so the overall behaviour of starch is determined in large measure by the relative amounts of amylose and amylopectin. Each of the fraction has unique properties that contribute to the functionality of starch from various plant sources.

Milk is the one food for which there seems to be no adequate substitute. It constitutes almost the entire diet for the young of all mammals. Each species produces milk that is especially adapted to the growth of its own young, but milk from one species may be used as food for others. Since animals were domesticated centuries ago, the milk from various species such as cow, buffalo, goat and camel, has been used in the diets of people throughout the world. Only cows milk is of commercial importance in the United States, although small amounts of goat’s milk are sold.

Whole cow’s milk is approximately 88 percent water, 5 percent carbohydrate, 3.5 percent protein and 3.3 percent fat. Its nutrient content varies from species to species, from breed to breed, seasonally and even from the beginning of the milking to the end of the process. In the United States it is cow’s milk that is used commonly as a beverage and in food preparation. Therefore the milk discussed throughout this chapter is cow’s milk.

INTRODUCTION

EGGS : Eggs and egg products constitute an important part of family meals. The economic importance of the egg to agriculture and industry, its multiple uses in the preparation of many food products, and its excellent nutritive value have stimulated scientific scrutiny into the nature of the egg.

STRUCTURE : The chief parts of the egg are the yolk, the albumin (the white), and the shell and the shell membranes. The yolk is more complex structurally than may be thought at first glance. At the very center is a light coloured structure called the white yolk. The vitelline membrane serves as the enclosure or sac for the yolk. The strength of this membrane is important when yolks and whites needs to be separated in cookery. Two important rather twisted membraneous structures extend from opposite sides of the yolk into the white.

INTRODUCTION

Vegetables and fruits have many similarities with respect to their composition, methods of cultivation and harvesting, storage properties and processing. In fact many vegetables are considered fruits in the true botanical sense. But the difference between the two is that vegetables are derived from various parts of plants e.g. roots, leaves, stems, buds and so on whereas, fruits are the mature ovaries of plants with their seeds. The edible position of most fruits is the freshly part of the pericap or vessel surrounding the seeds. The other difference between the two is that those plant items that are generally eaten with the main course of a meal are often considered to be vegetables, whereas those that are eaten alone or as a dessert are considered as fruits. This is the distinction made by food processors, certain marketing laws, and the consuming publics.

Fats are obtained from both animal and vegetable sources. The principal animal fats are cream, butter, egg yolk, the fat of beef, mutton, pork, bone marrow, chicken fat, and codliver oil. Vegetable fats are those derived from fruits and seeds of plant, as olive oil, cottonsed oil, corn oil, peanut oil, soyabean oil and nut oils.

COMPOSITION AND NUTRITIVE VALUE OF FATS

Fats and oils, the most concentrated of fuel foods, were the first of the organic compounds or foods to have their composition determined. They are made up of same three elements which go to produce the carbohydrates, but the oxygen is less in proportion to the carbon. This explains the fact that fat yields more energy per gram than carbohydrates do.

INTRODUCTION

Pulses are edible fruits or seeds of food bearing plants belonging to the family of the leguminosae. The major pulses which find important place in our diet are redgram dhal, bengal gram dhal, black gram dhal, green gram dhal and masoor dhal. Some are used as whole grams cow pea, rajmah and dry peas also belong to leguminous family.

Legumes not only have dietary values but also play an important role in maintaining or even improving soil fertility through their ability to fix atomospheric nitrogen.

INTRODUCTION

Many people confuse fortification with the term enrichment. There is a big difference in between these two terms. Fortification means the addition of those ingredients not normally found in a food and it is added to achieve a particular dietary purpose. Lysine may be added to corn products to increase the biological value of the protein. Salt may be iodised to prevent the occurrence of goiter. Breakfast cereals may be fortified with an array of vitamins and minerals to ensure a completely balanced nutritional meal.

In enrichment, the amounts added are designed to meet specific legal standards of minimum and maximum levels of nutrients. It is recognised that in the processing of cereal products that the removal of bran and germ causes a large portion of the vitamins and minerals naturally found in the product to be lost. During World War II an effort was made to correct this deficiency by government endorsement of the enrichment of bread, flour, and cornmeal. Wheat flour, cornmeal, corn grits, bread, ready to eat and uncooked cereals, and macroni products have been enriched with thiamine, ribo-flavin, niacin, iron and in some cases, calcium and vitamin D.

W.H.O. has defined food fortification as “a process where by nutrients are added to foods to maintain or improve the quality of the diet of a group, community or population”.

INTRODUCTION

Meat is the flesh of animals that is used for food and consists of muscle, fat and bone. If the muscle which is commonly known as the lean meat, is examined under the microscope, it is seen to be made up of bundles of fibers held together by a thin membrane called connective tissue. Further study reveals that these fibers are in readily hollow tubes that vary in length in different animals and in different muscles in the same animals that are filled with a fluid, sometimes called muscle juice, which is known to contain protein, minerals and extractives. The forms of protein in the muscles are myosin (a globulin) and myogen (an albumen) and in addition, on red meats, hemoglobin.

INTRODUCTION

Adulteration of food consists of substituting it wholly or in part by any cheaper or inferior substance or of removing any of its constituents, wholly or in part, which affects adversely the nature, substance or quality of the food. According to the Indian Prevention of Food Adulteration Act (PFA) 1954, any ingredient which, when present in food, is injurious to health is an adulterant. Thus, according to the PFA definition, many of the food contaminants discussed in the previous section are adulterants and come under the purview of food adulteration.

Adulteration of foods was practised even in ancient times. It was not a serious problem then because business was on a small scale and the transactions involved a large measure of personal accountability. Later, with the increased centralization of food processing and distribution, and corresponding decline in personal accountability, intentional adulteration of food increased. Even in the early nineteenth century, many adulterants were used in articles like pepper, essential oils, vinegar, beverages (coffee, tea, beer, wines), butter, bread, etc. In recent years adulteration of foods has become a serious problem the world over. In western countries there is a rising concern over the safety of the food supply and many remedial actions, both voluntary and enforced, have been taken.

Introduction to Swine Farming

World pig population in the year 2007 was 918,278,000 when the pig population in India was 14,000,000. The per head agricultural land holding is decreasing continuously because of a high rate of increase in population leading to excessive pressure on land. This lower land holding per person leads to lowered production per person forcing people to move to urban areas for better incomes. Excessive population pressure on urban areas itselves has its own demerits and limitations. To prevent this drift of village people to the urban areas they should be encouraged to adopt agriculture based professions which give the villagers a good return in short time span. Swine industry provides the same opportunities to villagers who can get better income with a minimal investment in short time intervals. In India for varied reasons the swine industry is not much developed. The breeds yield less and also the littre size is small in comparision to the better breeds available in many parts of world. In India, the desi swine survives on garbage and looks very unhygienic. Thus, most of the people in India feel uncomfortable to consume swine. Indian swine industry has a great potential but needs attention with respect to raising of better productive breeds with lesser cost for hygienic feeding and management.

            Pig is mainly reared for meat, skin and manure. Growing pigs for meat is little different from other production processes because here the daily live weight gain relates to the daily feed supply and the efficiency of output production depends upon the total quantity of input (feed).

(I)  Management of Swine

Since early days, cattle, sheep and goats accompanied human beings where ever they migrated but it is not the same with swine because of its rearing in unhygenic conditions. Some communities started avoiding swine because of the foul smell from pigs and slowly it entered into the religious life of Muslims and Yashdies.

            In China since 4900 BC and in England before 800 BC swine production scripts are found in majority in these two countries and at present these countries are leading in swine production. Swine growth is very much influenced by the method of keeping and rearing them and that is why its managemental practices should always be given high priority.

Reproduction

The female piglet attain maturity in 6-7 months of age and has a weight of 60-80 kgs. Males take more time to attain adolesence. The breedable age of a female is 8-12 months when it has a weight above 100 kgs. Its heat period is for 2-3 days. It may conceive by artificial insemination after 2-3 days of heat. The gestation length is 114 days. Weighing may be done after one month of age. Females generally give birth to 6-10 young ones at a time. If more young ones are born, than there are increased chances of death of the young ones.

(I)  Structure

The swine is an omnivorous animal because if can eat both vegelables and meat. But generally they prefer the vegetarian diet over the carnivorous diet. Pig is a simple stomach animal with double hoof. Different type of pigs are found as Sus indicus, Sus vittatus, Sus scrofa and  Suis domesticus.

            At the first instance, the skeleton of pig looks smaller than its original size. The main reason of this is feeding and nutrition of the animal. The pigs are kept indoor, provided less exercise and artificial feeding that leads to fattening of animals (pigs). The other reason for the undersized skeleton in pigs is that as compared to other animals the bone density of pig is more and they are very nicely arranged, that is why they are much stronger. The skull of the pig is triangular, long towards mouth, frontal bone is large and strong.

            The jaw has teeth, they use it for tearing and chewing of objects (feed). The temporary and permanent dental formula of pig is follows:

(I)  Breeds

Basically swine is a clean animal and in our country, mainly, poor people  are rearing them with the least available infrastructure and poor quality feed, usually garbage, and that is why swine  are forced to take garbage as a feed (Fig. 23). With good food and shelter, they can give birth twice a year with better productivity. Even 8000- 9000 years back swine stood at 3^rd position for being reared by humans after cattle and sheep. Swine comes under phylum Chordata as they have vertebral column and their class is mammalia. They come under Artiodactyla for being ungulate animals. Swine comes in Swede order and their species is swiss. They have 3 subspecies. The domesticated subspecies comes under Swede domesticus and wild pigs comes under Swede vitatus and Swede scrofa. In India there are 4 breeds of pigs. Wild, desi, exotic and crossbred.

(I) Digestion of Feed

In feed, carbohydrate is the main nutritive substance which is in the form of insoluble large particles. For intestinal absorption by blood and lymph, it is necessary to be digested as small and simple particles. For example, carbohydrate found in the form of starch or glycogen is not absorbed as such and is only absorbed when it is converted into the simple soluble monosaccharide form. Similarly, proteins present in the feed are also not absorbed untill they are digested into simple forms of aminoacids (Fig. 27, Fig. 28, Fig. 29, Fig. 30). Piglets are exceptions, as the newly born piglets obtain colostrum from their mother. Colostrum is rich in gamma immunoglobulins. This immunoglobulin is abosrbed as such without digestion by pinocytosis. It gives immunity to save the new piglets from many diseases. For this reason, colostrum suckling is necessary for new piglets. The process of pinocytosis occur only few days after birth and it  stops after some time. Fat occurs in the form of triglycerides in the feed. For absorption of the fat, it is necessary to be converted into its simple forms such as glycerol, free fatty acids or in the form of monoglycerides.

(I)  Deficiency Diseases

Mineral and vitamins, in adequate quantities, are essential in the diet of all animals. Many diseases occur due to deficiency of mineral and vitamins. Mineral and vitamins are more necessary in pigs due to their higher growth rate. It is normally seen that when pigs are reared on self made rations, they suffer more with the deficiency of one or more mineral and vitamins. Thus, it is necessary to introduce extra mineral and vitamins in the pig ration. If it is not done, its growth rate and body weight do not increase in proper ratio. The excess and deficiency of one mineral depends on quantities of other minerals present in the ration. It is frequently seen that pigs suffer from deficiency of more than one mineral and vitamin but some time pigs suffer from deficiency of one substance and excess of the other substance, so a balanced ration- with appropriate proportions of various mineral and vitamins- is necessary. Many times it is seen that some infectious diseases increase the necessity of mineral and vitamins in the body. This may cause deficiency of mineral and vitamins in the body and the animal may not recoup.

Following are the description of these symptoms and their prevention.

Pig Production on Scavenging

Pig farming has become a profitable enterprise since it possesses many economic traits e.g. high prolificacy, faster growth rate, shorter generation interval, low cost of rearing and high dressing percentage with better feed conversion efficiency. Pigs give quick return, convert inedible feed into valuable products, require less labor, adopt most types of farming systems, aid soil fertility, supplement other enterprises, etc. It is still considered as backward profession and unorganized rearing largely dominates the sector, and it is primarily in the hand of poor, landless and weaker section of society.

(I)  Slaughter and Preservation of Swine

Clean meat production from animals has been a difficult task since ancient times. Now it has become easier due to the joint efforts of Veterinarians and progressive animal owners. For clean meat production, with healthy animals, it is essential that care is given to their better management, better breeds, good ration and arrangements for preventing diseases are made. Meat from diseased animals is of inferior quality and unfit for human consumption.

            Meat is a very useful edible material, which is used for its high nutritive value with a good taste. Due to these nutritive elements, many microorganisms come in contact with the meat and they may contaminate it and change its natural structure and composition. As a result it produces many types of toxic and bad odour substances.

            Meat has an important place amongst human foods. Meat has many pecularities for which it is used in many parts of the world and by people of different religions. Many people prefer meat because of its better taste and/or odour. Often, it is observed that people consuming meat do not prefer vegetarian foods. The active consumer always gives more importance to the nutritive elements in meat. And at the time of bying meat, they prefer taking complete meat.  Allmost in all countries of the world, few selected and common animal species are slaughtered for meat production.

Swine Marketing

The animal population in India is nearly 14 millions which is increasing day by day. The importance of animals in Indian Economy cannot be neglected. The economic benefit from animals is 26% of the total benefit from agriculture. Agricultural farming is not possible without animals. In agricultural profession, animals have an important role. In our country, crores of small and marginal farmers and agricultural labourers depend for their life on animals for their livelihood. Poor animal wealth is not a good symptom for a country.

Till today the work which is done on animal wealth by economists and marketing specialists is only limited. Economic and marketing studies on meat producing animals in our country is very less. Pigs are normally reared for meat purposes. Pigs are mostly untouched from this type of research on economic and marketing aspects. Pig population in our country is nearly 12 millions, which is 2.5% of total animal population in India.

Due to lack of studies, it is not possible to give any statement about correct situation of marketing and capacity of pigs.

Materials Required

Equipments and machinery used in Postharvest Technology laboratory for processing, packaging and quality analysis.

Procedure

    1.    Identify the equipments and machinery, note down the typical features about its shape, size, colour etc.

Materials Required 

Fruits/vegetables, hand refractometers, fruit pressure tester, weighing balance, scale, chemicals and glassware required for analysis.

Procedure

    1.    Go to the orchard or vegetable field and collect samples of fruits and vegetables
    2.    Apply the specific maturity indices to the samples

Materials Required

Fruits/vegetables, thermometer, refractometers, NaOH, Phenolphthalein, glassware, weighing balance, plastic crates for storage of commodity, water cooling facility.

Procedure

    1.    Harvest the fruit / vegetable
    2.    Count No. of unmarketable fruits in every 100 fruits harvested
    3.    Record the internal fruit temperature in about 5-10 randomly selected fruits with the help of a thermometer
    4.    Pre-cool the commodity in cold water (<5ºC), air or refrigerator till the temperature reaches near its optimum storage temperature
    5.    Record the internal fruit temperature
    6.    Record the time required to pre-cool the commodity
    7.    Keep the product for storage at ambient conditions alongwith control
    8.    Record the difference in the shelf life and quality during storage

Materials Required

Fruits/ vegetables, washing tanks/ containers, size grader, fruit waxes, packaging material, neem based fungicides etc. 

Procedure

    1.    Take available fruits or vegetables 
    2.    Wash them in plain water or chemical solution as told by the teacher
    3.    Shade dry the fruits / vegetables
    4.    Prepare suitable wax solution
    5.    Apply wax on to the fruits as told
    6.    Record the fruit weight before packing
    7.    Pack the fruits properly in the trays / boxes depending upon the type and purpose
    8.    Do curing if required 
    9.    Do pre-packaging, if desired
    10.    Label the package for desired information
    11.    Keep the fruits for storage
    12.    Record the observations pertaining to weight loss and rotting periodically depending upon the commodity and its shelf life.

Materials Required

Fruits/ vegetables, weighing balance, plastic crates, CFB boxes or other packaging material fruit pressure tester, hand refractometer, markers etc.

Procedure

    1.    Harvest the fruits
    2.    Subject them to various pre-treatments (as discussed in previous exercise).
    3.    Record their initial parameters i.e. weight, firmness, surface colour, TSS, rotting etc. 
    4.    Place properly packed commodity in storage alongwith a check under ambient conditions
    5.    Record the observations regarding changes in quality during storage
 

Materials Required

Fruit, pulper, fruit mill, hydraulic press, screw type juice extractor, stainless steel pans, chemical preservatives, glass bottles, closures, crown corks, crown corking machine, plastic barrels.

Procedure

    1.    Select and weigh sound fruits/vegetables for extraction of juice/pulp.    
    2.    Wash and peel the fruits as required.
    3.    Extract the juice by hot or cold process.
    4.    Pasteurize the juice/pulp to inactivate the enzymes and partially kill microorganisms.
    5.    Preserve the juice/pulp by heat processing after hot filling and hermetic sealing or by addition of permissible quantities of suitable preservatives.
    6.    Label the bottles properly and keep them for storage

Materials Required

Fruit juice/ pulp, cane sugar, potable water, essence, citric acid, colours, preservatives, weighing balance, bottling and sealing facilities, hand refractometer, homogenizer etc.  

Procedure

    1.    Extract the juice as discussed in previous exercise.
    2.    Filter the fresh or preserved juice through muslin cloth.
    3.    Calculate the quantities of juice, sugar, water, acid (if required), preservatives, colour, essence etc. required for preparation of a known quantity of                      squash as per FPO specifications.
    4.    Prepare the beverage as directed by instructor
    5.    Pack the beverage in bottles 
    6.    Seal the bottles and label them
    7.    Take out one of the bottles and measure its TSS and titratable acidity.

Materials Required

Fruits juice, enzymes (pectinase, cellulase, pectinase CCM etc.), filter press, buchner filter apparatus, water bath, filter paper pulp, buchhi type rotary vacuum evaporator, freeze concentrator, membrane concentrator (whichever available), vacuum grease.

Procedure

    1.    Extract the juice as discussed in earlier exercises. Take a known quantity of juice in a conical flask.
    2.    Add enzymes i.e. pectinase @ 0.2% to the juice and keep in a water bath at temperature of 40-50ºC for 2 hrs.
    3.    Shake the flasks occasionally for uniform mixing of enzyme all throughout the flask during the enzymatic treatment.
    4.    Leave the flasks undisturbed for 10-12 hrs for allowing the insoluble solids to settle at the bottom of the flask.
    5.    Siphon the clear juice from the top of the flask.
    6.    Pass this siphoned juice through filter press or through a 0.4-0.5 cm thick bed of filter paper pulp in a Buchner filter apparatus or filter press.
    7.    Record the volume of the clarified juice obtained. Calculate the wastage.
    8.    Concentrate the juice in rotary vacuum evaporator at 50+2ºC temperature and at 28-30” Hg vacuum to a TSS of about 50 to 70º Brix. Record the exact TSS.
    9.    Record the volume of condensate obtained in the round bottom flask of the buchhi apparatus.
    10.    Calculate the folds of concentration

Materials Required

Fruit pulp, cane sugar, potable water, essence, citric acid, colours, preservatives, weighing balance, glass jars (500 ml capacity), jar closures, hand refractometer, steel pan, ladle etc.

Procedure

    1.    Select sound and fresh fruits, free from any blemishes. Generally a mixture of ripe and unripe fruits should be taken as the ripe fruits impart good flavour and the unripe fruits are rich in pectin, required for a good set.

    2.    Wash the fruits thoroughly. Cut into 4-8 pieces depending upon the fruit and size
    3.    Boil the fruit pieces for about 20-25 min in boiling water and pass through pulper to get a good pulp.
    4.    Weigh known quantity of fresh or preserved pulp and add about equal quantity of sugar (preferably in 45:55 ratio)
    5.    Cook the mixture on gas flame by occasional stirring. 
    6.    When the mixture becomes thick, perform sheet test.
    7.    Citric acid is added generally towards the end of cooking. Addition of all the acid in the beginning may result in stickiness and poor set. 
    8.    Remove from the flame when the mixture gives a clear sheet
    9.    Flavours, colours etc may also be added towards the end of boiling. 
    10.    Fill the jam in glass jars (preferably pre-warmed in hot air).
    11.    Close the jars with lug caps and allow to cool overnight.
    12.    Label and store in a cool place.

Materials Required

Fruit extract, cane sugar, potable water, essence, citric acid, colours, preservatives, weighing balance, glass jars (500 ml capacity), jar closures, hand refractometer, steel pan, ladle etc.

Procedure for Jelly

    1.    Select sound and fresh fruits, free from any blemishes. Generally a mixture of ripe and unripe fruits shouldbe taken as the ripe fruits impart good flavour and the unripe fruits are rich in pectin, required for a good set.
    2.    Wash the fruits thoroughly. Cut into 4-8 pieces depending upon the fruit and size
    3.    Boil the fruit pieces in water (about ½ to an equal weight of fruits for fruits like apple and 2-3 times the weight of sliced fruits in case of citrus fruits) for about 30 min. with occasional stirring. Strain the boiled mixture through coarse muslin cloth to get a clear pectin extract
    4.    A second extract may also be taken by boiling the same mass again and straining.
    5.    Add sugar (usually 3/4th to one part of the extract or in 45:55 ratio) to the pectin extract and boil in a stainless steel pan. Add required quantities of acid towards the end of boiling.
    6.    Remove the scum rising on the top of boiling mass occasionally.
    7.    To avoid charring, occasional stirring is also done.
    8.    To avoid destruction of pectin the cooking should be completed fast
    9.    Determine the end point of jelly as detailed ahead.
    10.    Fill in hot dry glass jars and cool rapidly
    11.    Pour a thin layer of hot molten paraffin wax seal to avoid moulding.   
    12.    Label and store in a cool place.

Materials Required

Lime fruits, green chillies, ginger salt (common), stainless steel pans, kinives, weighing balance, spices etc. 

Procedure

    1.    Select sound and mature fruits of lime, mature but green chillies having good size and ginger rhizomes.
    2.    Wash the lime fruits, ginger and chillies properly in running cold water.
    3.    Cut the lime fruits into pieces / halves. 
    4.    Remove the stalks of the chillies and cut into longitudinal slices. Peel ginger and cut into long thin slices.
    5.    Put the lime pieces, chilli and ginger slices in a wide mouthed pre-sterilized glass jar 
    6.    Add common salt @ 250g / Kg of material.
    7.    Squeeze some of the juice over the slices
    8.    Stir the mass well mixing thoroughly
    9.    In case the juice does not cover the material completely, add pre-boiled and cooled 5% solution of citric acid.
    10.    Keep the jar in Sun for about a week with occasional shaking of the material.
    11.    When the lime pieces start turning light brown, the pickle is ready for consumption.

Materials Required

Fruits or fruit pulp, steel pans, weighing balance, refractometer, sugar, salt, spices, acetic acid, citric acid etc. 

Procedure

    1.    Extract fruit pulp as told in earlier exercises. 
    2.    Take a known quantity of freshly extracted or preserved pulp.
    3.    Weigh sugar (about half the weigh of pulp).
    4.    Heat pulp and sugar over a gas flame.
    5.    Add spices, chillies, salt, citric acid (if required) etc. and cook
    6.    Record the TSS to judge the end point. It should be more than 50o Brix.
    7.    Add measured quantities of acetic acid and sodium benzoate at the end.
    8.    Cool and pack in pre-washed and sterilized glass jars
    9.    Label and store.

Materials Required

Tomato fruits, pulper, steel pans, weighing balance, refractometer, sugar, salt, spices, acetic acid, citric acid, muslin cloth etc.

Procedure
I. Puree

    1.    Extract fruit pulp by Hot process as told by the teacher.
    2.    Record the TSS of the pulp.
    3.    Concentrate the pulp by heating to 12º Brix (heavy puree)
    4.    Hot fill the boiling puree into pre-sterilized glass bottles (200 ml cap.)
    5.    Seal the bottles by crown corking
    6.    Heat process in boiling water in a big aluminium pan for 15-20 min. 
    7.    Cool the bottles to room temperature as quickly as possible.
    8.    Label and store at a dry place.

Materials Required

Fruits or vegetables, stainless steel knife, steel pans, Can Body Reformer, Flanger, Double seamer, weighing balance, Refractometer / Salometer, sugar or salt etc. 

Procedure

    1.    Wash the selected fruit or vegetable (as the case may be) 
    2.    Cut into pieces or slices (the size and shape may depend on the fruit/ vegetable but it should not be too large or too small)
    3.    Blanch the material in boiling water for 1-2 min for effective inactivation of enzymes. 
    4.    Prepare the sugar syrup of strength 40o Brix or brine of 1-3 % strength.
    5.    Prepare the can body using a can body reformer and flange the ends in a flanger.
    6.    Seal the base plate using first and second roller operations of the double seamer. 
    7.    Transfer the prepared fruits / vegetables into the cans. 
    8.    Pour in hot syrup or brine into the cans.
    9.    Place the lid over the top of filled can. (follow the first roller operation of the double seamer, if the cans are OTS cans)
    10.    Exhaust the cans in boiling water for about 10 min. to exclude any dissolved air out of the tissues or syrup/brine.
    11.    When the temperature of the centre of can reaches 79-80 ºC for fruits or 82ºC for vegetables, remove the cans from the exhaust box and seal them properly (follow the second roller operation of the double seamer, if the cans are OTS can).
    12.    Process the sealed cans at 100ºC and 115-121ºC for fruits and vegetables respectively for 15-30 min in case of fruits and 25-45 min. in case of vegetables.
    13.    Cool the cans immediately in cold water and air dry them at room temperature.
    14.    Label and store in a cool dry place.

Materials Required

Canned product, weighing balance, can cutter, vacuum/pressure guage, seam checking guage, Refractometer / Salometer etc. 

Procedure

    1.    Take a canned product say canned peach.
    2.    Record the weight of the can (A)
    3.    Record the information marked on the label i.e net  weight, date of packing, etc
    4.    Observe the can externally for the concavity of the lid.
    5.    Record the vacuum of the can by using a vacuum guage
    6.    Cut the lid of the can with a can cutter
    7.    Record the head space
    8.    Put all the contents over a sieve and let the liquid drain
    9.    Record the weight of empty can (B) to calculate net contents
    10.    Record the drained weight of the pieces.
    11.    Record whether the liquid is syrup or brine
    12.    Record the TSS of the salometer reading of the liquid (as the case may be)

Materials Required

Dehydrator, balance, thermometer, sulphur dioxide, blanching pan, fruits / vegetables, polythene or aluminium bags.

Procedure

    1.    Select sound fruits or vegetables 
    2.    Record their initial weight and wash them properly in plain water to remove any dirt or extraneous matter. 
    3.    Peel with stainless steel knife (as the case may be) and cut into thin uniform pieces or slices of  0.2-0.5 mm thickness
    4.    Blanch the slices in boiling water for 1-2 min. to inactivate the enzymes followed by immediate cooling.
    5.    Treat the slices with sulphur (sulphuring or sulphiting) in order to prevent darkening of the product during drying. 
    6.    Dry the slices in a mechanical air dehydrator at about 55 + 5oC temperature.
    7.    Record the weight of the product after every 2 hr till it becomes (almost) constant i.e. when there no more (significant) loss of moisture from the product.
    8.    Pack the product in ploythene or aluminium laminated pouches and seal them air tight. 
    9.    If it is to be converted into powder, the dried product can be ground in a grinder before packing.
    10.    Label the packages and store them in a cool dry place.
    11.    Plot the drying rate curve of the product on a graph paper and analyse it.
    12.    Record the initial and final moisture content of the product (as discussed in Exercise No. 19). 

Materials Required

Apple (or any local fruit), fruit mill, hydraulic press, weighing balance, Refractometer/sugar pectinol, diammonium hydrogen phosphate, Saccharomyces cerevisiae culture, Potassium metabisulphite (KMS) etc.

Procedure

    1.    Take a known quantity of apple (or any other fruit) say 20 Kg
    2.    Extract the juice as discussed in earlier exercises.
    3.    Add about 200 ppm of kms.
    4.    Add sugar syrup to increase the TSS to about 20 – 24ºBrix.
    5.    To about 10 Kg of juice diammonium hydrogen phosphate (10 g) and pectinol (20-25 g are added).
    6.    Take about 500 ml of this mixture in a conical flask and add pure Saccharomyces cerevisiae culture @ 1 % and plug the neck with cotton. Keep at 22-24ºC to complete the fermentation within one day and yeast culture is ready.
    7.    Add this culture to about 10 Kg of must for further fermentation (i.e. culture is added @ 5% therefore 500 g is added to 10 Kg must).
    8.    Record the TSS of the must before fermentation.
    9.    Keep must for fermentation in big jars (narrow mouth) filled to about 75 % of their volume. Close the mouth of jars or bottles with cotton plug.
    10.    Allow fermentation to take place at 22-24ºC for about 10–15 days.
    11.    When no more bubbles are coming out of the jars, fermentation is complete. At this stage the TSS reaches about 7º Brix.
    12.    Siphon the wine. Add filter aids if wine is not clear.
    13.    Blend the wine with sweetening agents if required.
    14.    Fill in beer bottles by keeping a head space of about 2.5 cm followed by crown corking them.
    15.    Pasteurize the bottles by keeping at 62.5ºC for 20 min.

Materials Required

Cut flowers, 1000 ml conical flasks, scissor, tape, distilled water, chemicals, weighing balance, volumetric flasks, labels, thermometer (max. & min. type) and hygrometer. 

Procedure

    1.    Collect fresh spikes of flowers
    2.    Cut at the base keeping about 25-60 cm of the cut flowers stick (uniformly for each flower).
    3.    Prepare Pulsing/ Vase solutions.
    4.    Put the prepared flower spikes in labeled conical flasks containing different Pulsing/ Vase solutions (for a known period of time).
    5.    Record the weight of the spikes and other observations daily.
    6.    Record the temperature and relative humidity of the storage chamber daily.
    7.    Analyse the recorded data and draw conclusion about the best vase solutions for the selected cut flower.

Materials Required

Fruit, vegetable or product sample, hot air oven, weighing balance, crucibles, petri plates, lead pencil / marker etc.

Procedure

    1.    Take crucibles  or petri plates and record the tare weight of crucibles / petri plates (C) and mark them
    2.    Cut the sample into small and thin pieces (if solid)
    3.    Put the sample into the crucibles / petri plates in three replications
    4.    Record the weight of crucibles + sample (C + S)
    5.    Put in hot air oven for drying at 70 + 2ºC.
    6.    Record the loss in weight after every 1-2 hrs till it becomes constant
    7.    Calculate the moisture and total solids.