eChapters

Introduction

A planer machine is a commercial machine tool hired for transforming the metal blocks or metal workpiece into the desired calculated shapes by generating the flat surfaces on a workpiece. Similar to a shaper machine, a planer machine is used for forming flat surfaces on the work piece using the single-point cutting tool.Planer machines are generally hired for operation on the larger workpiece or metal structure (blocks) that cannot be achieved by the shaper machine. They generally have larger beds and larger reciprocating movements covering a greater working length and surface area as compared to shaper machines.

Planned Strategies for Rural Development in India

The Food and Agriculture Ministry appointed a Committee to examine the Grow More Food activities of the Government which were in implementation and to suggest measures for ensuring rapid expansion of agricultural production. The Grow More Food Campaign Inquiry Committee pointed out that there was imperative “Need of an organisation for intensive rural work which would reach every farmer and assist in the coordinated development of rural life as a whole similar in conception to the “extension” or “advisory’” services in the U.S.A., the U.K. and elsewhere.” One of the recommendations of the Committee was that an extension agency should be set up for rural work, which would reach every farmer and assist in the coordinated development of rural life. The Planning Commission set up the Government of India in 1950 to formulate the First Five Year Plan summarized the reasons for failure of the earlier efforts by the governmental and voluntary organisations as follows

Successful designing of new gardens needs proper planning besides consideration of several things like type of garden, purpose, theme, users etc. The next phase is examining all necessary physical inputs and assessing feasibility of developing the particular type of garden. Advantages and disadvantages of the site are also to be considered before finally deciding the kind of garden to be developed. Every type of garden has a set of requirements and one has to evaluate critically all those things in detail, once the conceptualization is over.

Before taking up planning, the designer or the landscape architect should consider following basic points.

Planning

A greenhouse, is basically the purpose of providing and maintaining a growing environment that will result in optimum production at maximum yield. The agriculture in the controlled environment is possible in all the regions irrespective of climate and weather. It is an enclosing structure for growing plants, greenhouse must admit the visible light portion of solar radiation for the plant photosynthesis and, therefore, must be transparent. At the same time, to protect the plants, a greenhouse must be ventilated or cooled during the day because of the heat load from the radiation. The structure must also be heated or insulated during cold nights. A greenhouse acts as a barrier between the plant production areas and the external or the general environment.

Site selection and orientation

A greenhouse is designed to withstand local wind, snow and crop loads for a specific cropping activity. In this way, the structure becomes location and crop specific. The building site should be as level as possible to reduce the cost of grading, and the site should be well aerated and should receive good solar radiation. Provision of a drainage system is always possible. It is also advisable to select a site with a natural windbreak. In regions where snow is expected, trees should be 30.5 m away in order to keep drifts back from the greenhouses. To prevent shadows on the crop, trees located on the east, south, or west sides should be at a distance of 2.5 times their height.

Planning

• Generally 10% of the total area is left aside for building, roads, paths, tube-well, channels etc.
• Windbreak is very important aspect of orchard planning.
• Windbreak plants are planted in North–Wset direction.
• The market should be vicinity of orcharding site. It reduces transportation.
• The site of orchard should not be a wind or flood prone area.
• The soil should be neutral in reaction (pH 7).
• As per climate adaptability, fruit plants have been classified into three groups; tropical, sub–tropical and temperate types.

There are several planting plans or systems which can be adopted for planting an orchard. The main principle for the layout of orchard is:

1. It should accommodate maximum number of plant per unit area.
2. Provide adequate space for the development of the tree.
3. Ensure convenience in orchard operations.

The various lay out systems used are the following

Introduction

Spectacular accomplishment in every sector has enabled India to be amongtop achieving nations. However, every section of the society is not benefited by these achievements and problem of malnutrition still remains unresolved. Malnutrition is a common problem faced by underdeveloped and developing countries suchas Philippines, Nepal, Sudan,Tanzaniaand Indiasincelongback. Malnutrition includes undernutrition(wasting,stunting,underweight),inadequate vitamins or minerals as well as overweight, obesity and resulting diet-related non communicable diseases(NCDs). As per the latest report of World Health Organization, 52 million children under 5 years of ageare wasted, 17 million are severely wasted and 155 million are stunted, while 41 million are overweight or obese (WHO, 2018). More than 50% women of marriage age are suffering from anemia. If women are malnourished at the time of pregnancyand delivery, the babybornface theproblems such asphysical retardation,sensitive tocommon infections, reduced cognitive abilities, reducedmental development, etc. As per the World Health Organization (WHO) guidelines, starting from the date of conceiving a child, the first 1000 days are a critical window from nutrition point ofview.Unfortunately, inseveral regions of developingcountries includingIndia, neither the mother nor the babyis provided with the right quantity and qualityof food during this window period. Therefore, it is important for the policymakers to identifymalnutrition at an earlystage for timelyplanningand implementation of various intervention strategies at the community, village, and district level. NitiAyog, Government of India (GoI) (previously known as Planning Commission), in an effort to eliminate malnutrition,regularlyplans several short and longtermnutritionalprogrammesand policies.In thischapter,we willdiscuss some of these policies launched since independence and their impact in combatingmalnutrition.

The following is the plan of action to hold Animal Health Camps
1. Attempt will be made to hold at Gram Panchayat level.
2. Before 2-3 days monadi of camps must be do.
3. The camp will be held for 1 day. It will start by 7 AM and close at 2 PM.
4. The venue should be selected so that it is in the central location to get cases from 3-4 villages in order to provide facilities of clinical examination, pathological tests, etc.
5. The venue should be centrally located and easily accessible to the general public.

The progress of AI organization depends upon the type of service over and above that initially expected by the members. A well-conducted field service is very important in expanding the growth of any breeding organization. It includes activities as publicity, cooperation in health control, production testing and culling and progeny appraisal, the holding of demonstrations and open house and participation in cattle shows. The salary of a technician with bonus incentive encourages to do work of a high order. The semen costs per inseminated cow can be reduced by maintaining highest quality standards in producing, processing and shipping, by increasing number of cow serviced and by cutting all unnecessary costs. When breeding efficiency is high, the required amount of semen is kept at a minimum. An increase in cows inseminated is a key factor in keeping an organization in the back.

Group Discussion
Group discussion is the method by which two or more persons meet, express or suggest their ideas for getting the solution to the felt problems by them.
Objectives of group Discussion
• To develop the democratic leadership among the members.
• To conduct the systematic group discussion to solve the problems.
• To give opportunity to each member to share experiences.
• To promote the habit of talking, thinking, group planning and group action.
• To identify the group and focus the public interest and mobilize them for group action.

Awareness campaign should help educate your community on a specific subject by sharing basic information and providing examples. This will help community members have healthy conversations and increase awareness. This will begin the prevention process. Any awareness campaign should include following step;
1. Choose Your Topic Or Goals
2. Find Your Resources: Awareness campaigns take a lot of resources. You might have a set budget to implement your campaign. Money is not the only resource you will be using. Resources such as time, marketing and promotional material etc also needed for successful completion of campaign.
3. Segment Your Audience
4. Create a Schedule of Events, Programs, and Initiatives

This practical assignment is dealing with planning and preparation of agricultural information materials- leaflet, pamphlet and news stories, in this assignment required guidelines are provided for the students for preparing these agricultural extension material more effectively.

PURPOSE

To equip students in preparing Agricultural Information Materials like leaflets, pamphlets and news stories.

The City of Kumbh: Temporary Township and its major concern

From antiquity Allahabad has been regarded as a centre of pilgrimage [Table 9.a.]. The number of pilgrims visiting the city during Kumbh shows a steady rise, a clear indication of its popularity over the years. The official record shows 25 lac pilgrims in 1906, the first Mela of twentieth century, the number rose to 30 lac in 1918 and by 1930 recorded an increase of nearly 60%. There was a decline however due to the World War II, in 1942.

What is a Camera Shot

A camera shot consists of a sequence of frames captured continuously from when the camera starts recording until it stops. This uninterrupted footage is crucial in filmmaking and video production. By utilizing various types of shots, angles, and camera movements, filmmakers can highlight particular emotions, ideas, and actions within each scene.

Camera Shot Size Overview

The following shot size cheat sheet illustrates how different shot sizes appear on screen, helping to distinguish between them.

Understanding Shot Sizes

The essential shot sizes, ranging from establishing shots to extreme close-ups are explained in this chapter.

Before beginning the actual work on the establishment of a Fruit and Vegetable Processing Industry the following points should be considered:

Availability and possibilities of obtaining Funds: Investment of own money or obtaining loans from banks etc.

The scale of industry (Large, Small, Cottage or Home): Has to be decided based on availability of raw material, funds availability, land, labour and other resources.

The location: The processing unit should be located near to the actual production site of raw material so that the transportation costs of high bulk raw materials is reduced. There is no fun or justification of establishing apple processing industry in Lucknow or Bangalore and mango processing industry in Shimla as the related raw materials would have to be transported through long distances.

Site: Site selected in the location should be sunny area free from dampness and sufficient space for waste disposal should be ensured.

Introduction

Planning scripts for documentary production and drama is crucial for creating compelling and effective visual narratives. Documentaries focus on presenting factual content and real-life stories, aiming to inform or inspire audiences through a detailed exploration of a specific topic. In contrast, dramas revolve around fictional stories designed to evoke emotions, explore complex characters, and engage viewers with imaginative scenarios. Both genres require meticulous planning and scripting to ensure clarity, coherence, and impact. For documentary production, the script serves as a blueprint that guides the storytelling process, balancing factual accuracy with engaging presentation. In drama production, the script outlines the narrative structure, character development, and dialogue to create an immersive and emotionally resonant experience. Understanding the nuances of scripting for both types of productions allows creators to effectively communicate their messages and captivate their audiences.

A One-Minute Video Script

A one-minute video script is a brief yet powerful tool that can make a significant impact. The goal is to convey your message quickly and clearly within a short amount of time. This script should have a strong structure, starting with a powerful beginning to grab the audience’s attention and ending with a clear call to action (CTA). Crafting your video script allows you to tailor your message precisely to your target audience, ensuring maximum engagement.

Key Elements of an Effective One-Minute Video Script

• Powerful Beginning: Start your script with an attention-grabbing intro. This could be a surprising fact, a bold statement, or a question that piques the audience’s curiosity.

• Clear Main Narrative: Focus on the main narrative. Ensure your message is clear and easy to follow, keeping the audience engaged throughout.

• Strong Call to Action: Conclude with a strong CTA that encourages viewers to take the next step, whether it’s visiting your website or subscribing to your channel.

Over the past thirty years, digital imaging methods have gained prominence in the food and agricultural industries due to their non-invasive nature and high throughput capabilities. These techniques provide precise and quantitative descriptions of biological products. Recent advancements in artificial intelligence, particularly deep learning, have significantly enhanced computer vision, making it a crucial element of smart food and agricultural systems. Common applications include quality control of bioproducts, plant disease detection, plant phenotyping, crop yield estimation, animal production, and animal welfare. Studies indicate that the market for agricultural-related machine vision and AI is projected to quadruple to $4 billion globally by 2026, driven by the anticipated increase in the world’s population to nearly 10 billion by 2050 and the existing 50% food gap needed to feed this population.

The Red-Green-Blue (RGB) color imaging system, which provides information on objects’ color, texture, and 2D morphology, is one of the most widely used computer vision techniques. However, 2D color imaging systems are limited in that they cannot capture the 3D spatial location information of objects. This 3D information is vital for describing the physical properties of bioproducts, such as size, and is essential for guiding autonomous robotic systems in precision tasks like pruning, harvesting, and cutting. With the development of affordable 3D imaging hardware, it is expected that 3D imaging techniques will become more prevalent in food manufacturing and agricultural engineering. However, various 3D cameras have different design principles and imaging capabilities, resulting in varying camera parameters like resolution and frame rates. Selecting the most appropriate 3D imaging system for specific applications is crucial to provide accurate information and ensure functionality under challenging environmental conditions, such as occlusions and lighting variations. Additionally, the extra 3D data, including point clouds and depth information, complicates data analysis, necessitating the design of efficient 3D analysis models for successful implementation. Following figure provides a timeline of the development of crop modelling approaches.

Charts and graphs are essential tools for visualizing data and presenting information in a clear and comprehensible manner. They transform raw data into visual representations, making complex data easier to understand, analyze, and communicate. Various types of charts and graphs serve different purposes and are chosen based on the nature of the data and the message intended to be conveyed.

Historical Background and Evolution

The use of charts and graphs dates back centuries, evolving alongside advancements in mathematics, statistics, and technology.

Early Developments

Ancient Civilizations: Early forms of data visualization can be traced back to ancient civilizations. For example, Egyptian hieroglyphics and Babylonian cuneiform tablets included basic graphical representations of information.

William Playfair (1759-1823): Often considered the father of statistical graphics, Playfair introduced several fundamental chart types, including the bar chart, line chart, pie chart, and circle chart, in his works such as “The Commercial and Political Atlas” (1786) and “The Statistical Breviary” (1801).

Flashcards are a study aid that typically consists of a set of cards bearing information, such as vocabulary words, questions, or concepts on one side, and their corresponding answers or explanations on the other. They are used to enhance memory through active recall and spaced repetition.

Planning for Flashcards

1. Define the Purpose and Scope

• Determine the subject or topic you want to study.

• Identify the specific concepts, terms, or questions that need to be included.

2. Gather Resources

• Collect textbooks, lecture notes, or other educational materials related to the topic.

• Ensure you have reliable and accurate information. 

A poster is a printed or digital graphic display designed to convey information or messages to a target audience. Posters can include a combination of text, images, and graphics and are often used for advertising, educational purposes, propaganda, and events promotion. They are typically displayed in public spaces to reach a broad audience.

Historical Background and Origins of Posters

Early History

Ancient and Medieval Times: Early forms of posters can be traced back to ancient civilizations where announcements and decrees were inscribed on stone tablets and walls. The use of posters as we know them began with the invention of printing technologies.

15th Century: The invention of the printing press by Johannes Gutenberg in the 15th century paved the way for mass production of printed materials, including early forms of posters.

This practical assignment is associated with the planning, preparation and presentation of Microsoft PowerPoint slide. This assignment not only helps students in gaining first-hand knowledge on preparation of PowerPoint slide, but also improves their presentation skills while presenting a presentation before the audience.

PURPOSE

To acquaint students with first-hand knowledge about the power point slides and how to prepare it.

To get an idea about the presentation of power point slide in front of the audience.

This practical assignment is conceptualized and operationalized to plan for preparation and use of non-projected visual aids. In traditional and modern extension communication, the communication aids are helping the communicator to communicate the message in a better way. The examples of non-projected communication aids are poster, charts, flash cards, leaflets, folders etc.

PURPOSE

To provide precise and reliable scientific information told in simple language about a single practice or item of interest in the form of (Non-Projected Visual Aids) NPVA

To serve immediate needs of the farmer.

To catch the attention of the farmer and they can easily understand it.

What is Audio

Audio refers to sound that is within the range of human hearing. This encompasses everything from the spoken word and music to ambient sounds and electronic signals. In technical terms, audio often refers to the representation of these sounds in a form that can be recorded, transmitted, and reproduced, typically using electronic devices.

History and Evolution of Audio Communication and Aids

Ancient to Early Modern Period

1. Early Communication

• Oral Tradition: In ancient times, communication was predominantly oral. Stories, knowledge, and news were passed down verbally.

• Musical Instruments: Early instruments like drums, flutes, and stringed instruments were used for communication, rituals, and entertainment.

2. Writing and Instruments

• Written Language: The invention of writing allowed for more permanent records of communication but was separate from audio.

• Bell Towers and Horns: In medieval times, bells and horns were used for signaling and communication over distances.

Planning is the beginning of all the other processes of management, namely, organizing, staffing, directing, communicating and controlling.

Planning is deciding in advance what to do, how to do, when to do and who is to do it. Planning bridges the gap from ‘where we are’ to ‘where we want to go’ (Koontz and O’Donnell).

In the words of Theo Haimann, “Planning is the function that determines in advance what should be done". It consists of selecting the objectives, policies, programmes and procedures of the enterprise and also the means of achieving their objectives.

As a part of planning process, the manager has to ensure that his team members understand the purposes and objectives of his enterprise and also methods to achieve them.

Abstract

Current trend of global agricultural systems entails preference towards sustainable crop production through organic agriculture (ecology based) as compared to conventional (synthetic input based). In order to claim as organic, it needs to be certified as per requirements organic standard. The soil fertility management organic standard requirements of major countries are outlined. This review article compares the agricultural management practices of organic and conventional systems so as to assess its impacts on microbial biodiversity, microbial activities on soil functioning and long term fertility based on long term field studies conducted in different parts of the globe.

Introduction

Plants possess complex, systematic and specific mechanisms to cope up with abiotic as well as biotic stresses in the existing environment. ‘Do plants respond to sound ? How can plants perceive sound without a hearing organ?’- are interesting queries among the scientific community. Responses of plants to different factors such as temperature, moisture, light, wind, pests and microbes are well understood. However, information on the effects of audible sound frequencies on plants are still lacking. Recent evidences suggest that audible sound stimulation can contribute to better plant growth and improved quality of plant produce. It also represents a new trigger for plant protection. Sound is an acoustic energy in the form of a mechanical wave which transmits through gases, liquids and solids. Acoustic spectrum consists of three regions, infra sound (less than 20 Hz), audible region (20-20,000 Hz) and ultrasound (greater than 20,000 Hz). Infra sound and ultrasound are used in clinical diagnosis and therapeutics.

Research on plant responses towards different stimuli started during 1880s by Charles Darwin. In 1848, Dr. Gustav Theodor Fechner, a German experimental psychologist, suggested that plants are capable of feeling emotions and that one could promote healthy growth of plants with talk, attention, attitude and affection. Later, J. C. Bose (1926), famous Indian botanist and physicist, made several studies on the effect of sound vibrations on plants. According to him, a plant treated with care and affection gives out a different vibration than a plant subjected to torture. In addition, Bose found that plants grew more quickly in pleasant music and more slowly in loud noise or harsh sounds. He also noticed that plants can “feel pain and understand affection” based on variation of cell membrane potential under different sound frequencies. Retallack (1973) also described several experiments involving plants and music.

The term rare amino acid is misleading in some respects. It refers to all those amino acids that are not incorporated into proteins. We already got to know some of them like ornithine or citrulline that are rather common intermediates of the basic metabolism. Roughly 220 different structures are known, most of which occur in plant cells in a free state though glutamate-, oxalate- or acetyl- derivatives can also sometimes be found.

The growth and productivity of crops depend on various factors, with the nutrient content of plant parts like leaves and stems playing a crucial role. These parts are often used as indicators to assess the nutrient status of plants. Each crop requires essential elements at specific concentrations during different growth stages, known as ‘critical levels’. When the nutrient content falls below these critical levels, plants may display symptoms of deficiency.

Nutrient requirements and availability can be evaluated through: i) plant diagnosis, ii) soil analysis, and iii) plant analysis using qualitative or quantitative methods. By conducting these tests, necessary nutrients can be identified and applied to crops to sustain growth and correct deficiencies. While rapid tissue tests offer quick solutions for nutritional problems, quantitative estimation of both plant and soil nutrient concentrations is more economical and provides a long-term strategy for managing nutritional issues. Implementing quantitative estimation allows for informed application of fertilizers, whether as basal or foliar, thus addressing deficiencies effectively and ensuring sustainable crop growth.

Plant analysis includes tests on fresh tissue in the field and analysis of total nutrients in plants in the laboratory. Plant analysis is based on the relationship between nutrients in a plant and nutrient availability in a soil. Plant analysis is not a direct method of soil fertility evaluation, but it can serve as a valuable supplement to soil testing in the task of soil fertility evaluation. Plant analysis is useful in confirming nutrient deficiencies, toxicities and imbalance and identifying hidden hunger. Plant analysis generally provides more current plant-based information than soil testing, entails more effort in terms of sampling, sample handling and analysis and, perhaps, expensive.

Different diagnostic tools are designed to avert nutrient deficiency or sufficiency and if properly used both loss of yield and quality of crop can be minimized. Among several diagnostic tools, nutrient analysis of standing crop seems to be an efficient method in arriving at the need-based fertilizer scheduling for various crops.

Nutrient uptake by plants indicates the actual accessibility of nutrients in soil to the plants. Also, concentration of certain heavy metals in plant indicates their solubility in soil which leads to poor crop quality.Although, different plant species and even different varieties of same species may differ in their nutrient requirements, the concentration of nutrient element in plant can act as guide to support the soil test result in assessing nutrient supplying capacity of a soil and as a tool for correcting any deficiency if carried out early enough to prevent yield loss. However, analysis of harvested or mature crop is like a post mortem as this information only can help in nutrient management planning in subsequent years.

Like soil testingplant analysis also suffers from some limitations. Amongthem, the most important are the risk of sampling error as well as the chances of incorrect interpretation of test report in recommending fertilizers. Selection of right plant part and right stage of crop growth are very crucial for successful plant analysis.

4.1 Sampling and Preparation for Analysis

The determination of nutritional need of crops is an important aspect of nutrient management of any plant analysis programme. The need of fruit plants for mineral nutrients differ from those of annual crop species in a number of ways, many of which are related to the perennial nature of tree crops. In perennial tree crops, there is a need to supply nutrients both for ultimate fruit production, the fruits and the vegetative organs, which persist from year to year. The need for leaf analysis in perennial horticultural crops and forest trees has proved its superiority over soil diagnostic methods. This is essentially because of their deeper root system and the fact that nutrients supplied in one year may have its effect on both the nutrition and crop production in following years. However, it is largely being used not as an alternative method to soil testing, but as a supplement to soil testing. Results of foliar analysis are usually interpreted using the critical nutrient level (CNL) approach. Accurate interpretation of foliar analysis using the CNL approach is possible only when sampling is restricted to the same growth stage at which standard reference values have been established (Beaufils, 1971, 1973). The general purposes of plant analyses are:

Accumulation of nutrient elements in plant tissues indicates the accessibility of the concerned elements from the soil to the plant. Although different plant species and even different varieties of the same species may vary in their nutrient requirements, composition of a part or of the whole plant may well be adopted as a guideline to support the soil-test results for factual assessment of soil’s nutrient supplying power.

This chapter introduces plant analysis as a means of determining crop nutrient status and diagnosing nutritional deficiencies. It explains the selection of representative plant tissues at suitable stages of growth, followed by washing, drying, grinding, digestion and elemental estimation. Recommended tissues and sampling stages are provided for cereals, pulses, oilseeds, fibre crops, vegetables, ornamentals and fruit crops. Procedures are included for estimating nitrogen, phosphorus, potassium, sulphur, boron, zinc, iron, copper and manganese in plant samples. The chapter stresses that reliable interpretation depends on correct tissue selection, careful sampling and freedom from contamination. It thereby connects laboratory measurements with crop nutrition and fertilizer management.

Introduction

Plant architecture is defined as a three-dimensional organization of plant body in terms of its size, shape position of leaves, flower organs and branching pattern. Earlier this was the only criterion for systematic and taxonomic classification of plant species and the best means of identifying them (Stecconi, 2006). Study of plant architecture emerged as a new scientific discipline some 30 years ago. The subject derives its base from earlier works on plant morphology (Halle and Oldeman, 1970) but currently it is integrated with several disciplines of plant sciences ecology and engineering. Modification in plant architecture causes alteration in primary and secondary growth. This occurs due to differences in phyllotactic arrangement, branching pattern and floral differentiation. Plant architecture can be modulated by various parameters like climate, agronomic practices and human interventions. Manipulation of plant architecture is a major area in plant science which is currently adopted for productivity improvement by breeders, agronomists, horticulturists and landscape managers. However, the basis for such manipulation lies in the knowledge of the basic architecture of plants and its significance.

An ice cream plant is a highly interconnected operation in which quality, food safety, productivity, maintenance, cost, cold-chain performance, and business results influence one another. This chapter presents plant audits as management tools rather than simple compliance exercises. It provides a structured monthly audit system covering raw materials, production, quality assurance, hygiene, maintenance, productivity, cost control, warehouse operations, cold chain, documentation, and KPI performance. Department-wise scoring enables management to compare performance, identify weaknesses, prioritize corrective actions, and track improvement. The chapter also discusses common audit mistakes and best practices. A disciplined audit system strengthens accountability, reduces losses, improves operational control, and supports continuous improvement.

Introduction

Vast proportions of the population of the world are dependent on plants as their principal source of food either directly or indirectly. Recent decades have also seen increased numbers of people turning to alternative medical therapy based upon traditional folk medicine or food as a form of medicine. These alternative therapies emphasise the importance of a ‘good diet’ in maintaining and restoring health. Under these circumstances, vast majority of population may see diet therapy, dietary supplements and non-invasive alternative therapies as a safer, less technological and more natural way of maintaining health and treating and preventing individuals from illness. These alternatives may be seen as empowering the consumer and shifting the locus of control away from the medical establishment. This chapter covers many crucial topics to understand the chemistry and bioactivity of the active compounds of plant origin. It also aims to cover the latest research on the bioactive compounds.

20.1 INTRODUCTION

With rapid increase in area under micro irrigation, now fertigation is getting momentum in many states in the country. At present, most of the soluble fertilizers are imported in the country. Hence, these are very expensive and beyond the reach of common farmers. It is interesting to record that for number of nutrients, which are becoming constraints in most of the Indian soils, soluble formulations have yet to be developed. This calls for some alternative options. As an alternatives liquid manures like cow urine, biogas slurry, or fermented manures etc can be sprinkled on the soil, applied with irrigation water or diluted and sprayed as foliar fertilizers (Frank et al; 2005).To our understanding, organic fertilizers /organic liquid manures referred now as bio-enhancers are essential to maintain the activity of microorganisms and other life forms in the soil. These are prepared locally, can resolve number of apprehensions and will be helpful in boosting production and mitigating number of nutritional disorders in most of soils and crops. It is interesting to record that these can be prepared at the farm with some infrastructure facilities and hands on training. Most of these formulations are used through irrigation. These organisms (bacteria and moulds) improve the soil health by solubilzing the complex organic substrates into simple forms and make it available to the plant, resulting in increased productivity. If these are integrated with micro irrigation techniques after proper filtration their efficacy can further be improved.

Cow dung and urine are important component in organic farming. Cow dung is rich source of microbial consortia Actinomycetes, which are helpful in control of many plant diseases. A potential species Streptosporangium psedovulgare of Actinomycetes and four strains of Bacillus subtalis have been identified at CISH, Lucknow (Pathak et.al., 2009).These showed anti pathogenic potential against anthracnose gummosis, stem end rot and dieback pathogens. These were observed to attack mycelia cell wall and finally the host cell degenerates completely. Organic liquid manures play a key role in promoting growth and providing immunity to plant system ( Sreenivasa et al., 2010).

Introduction

Plant growth and productivity are adversely affected by various abiotic stresses. Plants are frequently exposed to a plethora of stress conditions such as low temperature, salt, drought, flooding, heat, and oxidative stress. Various anthropogenic activities have accentuated the existing stress factors. All these stress factors prevent them from reaching their full genetic potential and limit the crop productivity. In the event of growing concerns of uncertainties in climatic conditions, the abiotic stresses have become the major threat to agriculture production worldwide (Bray et al., 2000). The plant responses to abiotic stress condition are believed to be complex in nature as these are the reflections of integration of stress effects and responses at various levels of plant organization. To provide tolerance against stresses, plants are equipped with several inbuilt physiological and biochemical mechanisms occurring at cellular level. An understanding of processes linked to these mechanisms is vital in optimizing the crop growth and productivity under stress conditions.

6.1 Introduction

Water deficit stress is a serious and frequently encountered abiotic stress in the terrestrial surface. Its deleterious effects on plant growth and productivity are well documented. Plant responses to water stress are believed to be complex as these operate at various levels of plant organization. Several in built physiological and biochemical mechanisms provide resistance to plants against stress. An understanding of the processes linked to these mechanisms is vital for optimizing crop growth and productivity under stress. Plants respond and adapt to water stress by altering cellular metabolism, thus invoking stress tolerance. Alteration in endogenous concentrations of growth regulators along with accumulation of osmolytes, modifications in antioxidant cascade, changes in protein profiles and induction of gene expression in plants under stress are important characteristic metabolic changes that invoke stress tolerance at the cellular level. Alteration in endogenous concentrations of plant bio-regulators under stress helps plants through better turgor maintenance and efficient water usage by influencing stomatal functioning, hydraulic conductivity and morphological adaptation. Progress made in plant adaptation to water stress is an outcome of advances made in analytical techniques on endogenous growth regulator analysis and powerful and reliable molecular and genetic techniques.

2.1 Introduction

Dear students, you shall be taught plant biotechnology during the third semester in the course ‘Elementary Plant Biotechnology’. But, for understanding of non-conventional breeding methods/techniques you should acquire some knowledge of basic plant biotechnology. Hence, in this chapter plant biotechnology is introduced to you in brief.

2.2 Definition

The term ‘biotechnology’ stems from fusion of ‘biology’ and ‘technology’. It was coined by Karl Ereky, a Hungarian agricultural engineer, in the beginning of 20th century. According to him, all processes used to yield finished products from raw materials with the help of living organism come under biotechnology. It may be defined in number of ways. However, in simple terms, biotechnology may be defined as ‘the controlled use of biological agents, such as microorganisms, or cellular components, for beneficial use’ (U.S. National Science Foundation).

Development of Plant Body

A vascular plant begins in existence as a morphologically simple unicellular zygote (2n). The zygote develops into the embryo which in the long run develops into the mature sporophyte. The development of the sporophyte (2n) involves division and differentiation of cells and organization of cells into the tissue systems. The embryo of the seed plant possesses relatively simple structure as compared to the mature sporophyte. The embryo bears a limited number of parts containing generally only axis bearing one or more cotyledons. The cells and the tissues of this structure are less differentiated. However, the embryo grows further, because of the presence of the meristems, at two opposite ends of the axis, of future shoot and root. After germination of the seed during development of the shoot and root new apical meristems appear which cause a vegetative growth and reproductive stage of the plant attained.

Fundamental Parts of the Plant Body

The plant body consists of a number of organ i.e., root, stem, leaf and flower. Each part has different functions for plant growth.Flower consists of sepal, petals, stamens, carpels and sometimes also sterile members. Each organ is made up of number of tissue systems; each tissue system consists of number of tissues. Tissue consists of group of cells that are alike in origin, structure and function.

Abstract

The establishment of All-India Coordinated Wheat Improvement Project in 1965 coincided with the introduction of high yielding semi-dwarf wheat varieties. Since then India has made very impressive progress in increasing wheat production over the past three and half decades. India now ranks as the second largest wheat-producing nation in the world. In fact from a state of “Ship to mouth” in 30 years or so India has become a nation of surpluses. The significant contribution made by the project in helping the increased wheat production cannot be ignored. Through coordinated research and development, nearly 200 wheat varieties have been developed during the last 35 years in India. However, only a small number of them produced without backing of specific quality breeding programs excel in quality traits also. The increasing demand of baked and pasta products in the country along with economic liberalization and global trade have offered opportunities for better utilization of the surplus wheat. Thus, in the current decade and beyond, wheat quality needs uppermost attention to meet the trade requirements for domestic and export purposes. Therefore, there is a need to reorient the wheat improvement programs in the country.

Definition

Based on various standard sources, plant breeding has been defined in various ways. A few important and standard definitions are:

The art and science of changing plants genetically.

Plant breeding is the genetic adjustment of plants to the service of man.

Improvement of crop plants as the result of process of evolution directed by man for his own ends. The basic principles of plant breeding are thus the principles of evolution. Directed evolution as imposed in plant breeding differs from natural evolution chiefly in a greatly reduced time-scale, and in a more precise control over the factors which govern hybridization and selection.

The science and art of manipulating the heredity of plants for a specific purpose.

Plant breeding is a deliberate effort by human to nudge nature, with respect to the heredity of plants, to an advantage. The changes made in plants are permanent and heritable and the professionals who carry out this task are called plant breeders. This effort at adjusting the status quo is instigated by a desire of humans to improve certain aspects of plants to perform new roles or enhance existing ones. As a result, the term “plant breeding” is often used synonymously with “plant improvement” in recent years. Normally the term plant breeding connotes the involvement of sexual process in effecting a desired change; however, it is also true that modern plant breeding also includes the manipulation of asexually reproducing plants (plants that do not reproduce through the sexual process). Breeding is therefore about manipulating plant attributes, structure, and composition, to make them more useful to humans.

Gepts and Hanock (2006) have defined plant breeding as an applied, multidisciplinary science. It is the application of genetic principles and practices associated with the development of cultivars more suited to the needs of human than the ability to survive in the wild; it uses knowledge from agronomy, botany, genetics, physiology, pathology, entomology, biochemistry and statistics. Of particular importance is the ability to transfer, in addition to major genes, large suites of genes conditioning quantitative traits such as productivity and other traits of interest to humans. The ultimate outcome of plant breeding is mainly improved cultivars. Therefore, plant breeding is primarily an organismal science even though it is eminently suited to translate information at molecular level (DNA sequences, protein products) into economically important phenotypes. The traditional definition of plant breeding includes only those scientists who develop new cultivars and improved germplasm, however, many feel this definition should be expanded to include scientists who contribute to crop improvement through breeding research.

Introduction
Plant breeding and genetics are at the forefront of agricultural innovation, playing a crucial role in enhancing crop traits to meet the ever-growing demands for food, fiber, and fuel. This chapter delves into the scientific principles, methods, and modern advancements in plant breeding and genetics, providing a comprehensive understanding of how these disciplines contribute to global food security and environmental sustainability. The chapter begins by exploring the fundamental principles of plant breeding, including heredity, genetic variation, selection, and hybridization. These concepts form the foundation for developing new plant varieties that exhibit desirable traits such as improved yield, disease resistance, and environmental adaptability. The importance of genetic variation is emphasized as a key driver of plant improvement, with discussions on the sources of genetic variation, the role of germplasm resources, and the impact of genetic diversity on plant adaptation. As the chapter progresses, various breeding techniques and strategies are examined, including mass selection, pedigree breeding, backcrossing, and markerassisted breeding. These methods are crucial for developing new plant varieties that can withstand the challenges posed by climate change, pests, and diseases. The chapter also addresses the role of genomics in plant breeding, highlighting the significance of genomic selection, gene editing, and bioinformatics in accelerating the breeding process and enhancing crop traits. The chapter further explores the controversial topic of genetically modified organisms (GMOs), discussing the principles of genetic engineering, the rise of genetically modified crops, and the associated controversies and concerns. The importance of GMOs in addressing global food security and environmental challenges is also discussed, providing a balanced perspective on their potential benefits and risks. The chapter concludes by emphasizing the critical role of plant breeding and genetics in ensuring food security and combating global warming. By developing climate-resilient crop varieties, improving water efficiency, and enhancing disease and pest resistance, plant breeding and genetics can contribute to sustainable agricultural practices that reduce greenhouse gas emissions and conserve natural resources

1. Mendel presented his results in the form of

   a) Two paper in French langua

   b) Two paper in German language

   c) One paper in German language

   d) None of the above

2. The alternative forms of a gene are called

   a) Allelomorph

   b) Gene

   c) Alleles

   d) None of these

Plant breeding is the art and science of changing and improving the heredity of plants. The art of plant breeding lies in the breeder’s skill in observing and selection of superior plants. The value of selection largely depends upon the skill of the breeder. The skill that a breeder develops though a close and deep study of the concerned crop species. Before the rediscovery of the Mendelian Laws in 1900 AD, the plant breeding is as an art. The modern age of plant breeding began in the early part of the twentieth century, after Mendel’s work was rediscovered. Today plant breeding is a specialized technology based on genetics. It is now clearly understood that within a given environment, crop improvement has to be achieved through superior heredity. Plant breeding developed into a science as knowledge progressed towards the genetics, cytogenetic, physiology, pathology, biochemistry, biotechnology and biometry. The fundamental of plant breeding was based on recognition of the genes. The genes were identified by their effects on the visible expression of plant traits such as whether a plant was a dwarf or tall, or the flower color was white or pink. Through systematic hybridization, a desirable gene could be transferred from one to another cultivar. More recently the science of molecular genetics proposes to advance plant breeding. Molecular genetics was ushered in with the description of chemical structure of deoxy-ribonucleic acid (DNA), the material that constitutes the genes. DNA carries the instructions for synthesis of specific proteins that determine the visible expression of particular characters. The new technology does not supplant nor diminish the importance or need for traditional selection and crossing procedures in the breeding of improved cultivars. The performance of today’s cultivars reached at high levels through refined selection and hybridization breeding procedure.

The early developments in plant breeding that took place are based on archaeological evidence. The first efforts to grow wild plants probably occurred in Southeast Asia culminated in the domestication of some of the many plants with which humans experimented in 13000 BC. By 10000 BC, advanced knowledge existed of such plants as rice (Oryza sativa), several legumes such as pea (Pisum sativum), runner bean or broad bean (Phaseolus or Vicia spp.) and possibly soybean (Glycine max). At this point crops became domesticated.

Although the beginning of civilization in China and Southeast Asia are obscure and fragmented. The number of successful species domesticated indicates considerable success in plant breeding. The third site of independent agricultural development and plant breeding was in south-central Mexico between 6700 and 5000 BC. Squash and avocados were domesticated first and a number of species of maize. Domestication in the Middle East and China included the self-fertilized crop like cereals and soybean.

Systematic scientific efforts to improve genetic potential of crops in India were initiated in 1905 at the Imperial/Indian Agricultural Research Institute. In 1929, with the establishment of the Indian Council of Agricultural Research (ICAR), several associated developments took place in the first half of the 20th century leading to establishment of several crop-based institutes (sugarcane, cotton, jute, rice, oilseeds, tobacco, potato) and multidisciplinary institutes such as the Indian Agricultural Research Institute (IARI), Central Arid Zone Research Institute (CAZRI), and Central Plantation Crops Research Institute (CPCRI). Additionally, a Project on Intensification of Regional Research in Cotton, Oilseeds and Millets (PIRRCOM) was implemented during 1950s with establishment of several research stations in different regions.

Crop improvement

Crop improvement refers to the genetic alteration of plants to satisfy human needs. It deals with the improvement of crops and production of new crop varieties, which are far superior to existing types in all characters. In pre-history, our ancestors in various parts of the world brought into cultivation a few hundred species from the hundreds of thousands available. In the process they transformed elements of these species into crops though genetic alterations that involved conscious and unconscious selection, the differential reproduction of variants. Through a long history of trial and error, a relatively few plant species have become the mainstay of agriculture and thus the world’s food supply. This process of domestication involved the identification of certain useful wild species combined with a process of selection that brought about changes in appearance, quality, and productivity.