eChapters

Botanical Name: Anacardium occidentale L.

Family: Anacardiaceae

Chromosome No: 42

Place of Origin: Brazil

Common Name: Cashew, cashew tree, caju

7.1 Introduction

Cashewnut (Anacardium occidentale L.) is an important tropical tree crop which leads the edible nuts in international trade with 29% market share only after hazelnuts (35%) and followed by walnuts (21%) and almonds (16%). It is one of the major exports earning crops which accounts nearly Rs. 2515 crores contributing about 1.5% of the total Indian exports. It was only during the past two decades it gained the status of horticulture crop. India is the world’s largest producer of cashewnut. The cashew cultivation area in India during 2018-19 was 10.89 lakh hectares with an annual production of 743 thousand metric tons of fruits. Maharashtra is a much-advanced state for horticulture which occupies large area (1.9 lakh hectares) under this crop (Directorate of Cashew & Cocoa Development, Cochin, Kerala). Cashew exports amounted to over 566 million U.S. dollars from India in fiscal year 2020. This included cashew kernels and cashew nut shell liquid. India’s main export markets for this commodity included South Korea, China, Spain, United States and Belgium (Department of Agriculture, Cooperation & Farmers Welfare).

SUMMARY

Multiplicity of cropping systems has been one of the main features of Indian agriculture and it is attributed to rain-fed agriculture and prevailing socio-economic situations of farming community. It has been estimated that more than 250 double cropping systems are followed throughout the country and based on rationale of spread of crops in each district in the country, 30 important cropping systems have been identified. Cropping systems of a region are decided by and large, by a number of soil and climatic parameters which deter mine overall agro ecological setting for nourishment and appropriateness of a crop or set of crops for cultivation. Much of the Madhya Pradesh area also coincides with the rainfed semi-arid agro-ecological region and sub-regions which are upland, forested with low agricultural productivity and predominately tribal population. It would appear that over the centuries – including in recent history tribals have been inexorably moved off the better lands, into areas which from an agricultural perspective have low productive capacity and little potential for growth. Low agricultural productivity is one of the main causes of persistently high poverty rates in the state and the poor masses not only depends upon the farming system but also chosen different alternatives for their sustanability.

I. INTRODUCTION

Over the last few decades, protection of intellectual property rights (IPRs) has become a global issue. The existing international intellectual property rights regime has been governed by the Trade- Related Aspects of Intellectual Property Rights (TRIPS) Agreement.1 Inspite of maturity of intellectual property laws in post TRIPS era it still desiderate to established coherence with human rights laws particularly right to health and maintain a distance with the socio-economic dimension of intellectual property protection. On the other hand the international human rights instruments from the very beginning appear to be considerable to make certain links with intellectual property rights.2 The issue that is now debated that the adoption of the TRIPS Agreement provisions have serious impact on the realization of certain basic human rights such as the right to health because of non availability and affordability of much needed medicines for the poorer populations of the world particularly in majority of developing countries. Meanwhile TRIPS flexibilities as confirmed by the Doha Declaration on Public Health were adopted in 2001 by the global community to address medicines as public health issue.3 Keeping in view the above developments the problem of right to health and the relationship between medical patents and access to medicine in the case of the HIV/ AIDS and T.B epidemics is complex challenge in the context of the 2030 Agenda for Sustainable Development Goals in 2015 adopted by Member States of the United Nations in Sep, 2015. One of the aims of the agenda is to ensure healthy lives and promote the well-being of people of ages.4 In such a situation it is high time to revisit the existing intellectual property regime in the broader context to protect everyone who is likely to be negatively affected by intellectual property standards imposed by developed nations. Under this backdrop the present paper wishes to examine the various kinds of potential impacts of intellectual property regime on the realization of access to medicine as part of human right to health as universal entitlements amongst the most disadvantaged and marginalized peoples and communities in the broader context of sustainable development goals.

Introduction

‘Cole crops’ is a general term used to describe several vegetables in the Brassicaceae family. It is an important and highly diversified group of vegetable crops grown worldwide that belongs to Brassica oleracea (Monteiro and Lunn, 1998) and includes particularly six Brassica crops (cabbage, cauliflower, Brussels sprouts, broccoli, kale and knol kohl). All of these crops can trace their history to a common ancestry of wild cabbage originating in the Mediterranean and Asia Minor regions. Cole crops are one of the oldest cultivated plant groups in the world. They are cultivated in Europe since very ancient time from where they have spread to other parts of the world (Nieuwhof, 1969). All the cole crops (except few cauliflower, broccoli and cabbage types) require chilling temperatures for about two months to transform from vegetative phase into reproductive phase. However, the period of chilling requirement differs according to the kind of crop and varieties. Cole crops are also commonly called as European or biennial vegetables due to their cool temperatures requirements and two season requirement to complete their life cycle.

Major Resources of Cole Crop Germplasm

Germplasm is any form of the hereditary material from an organism. Genetic resources encompass all the various forms of germplasm that are available for collection, storage and use. The genetic diversity of crops, represented by traditional local cultivars and wild relatives has been disappearing rapidly during recent decades. Initial concern was noted by H.V. Harlan in the 1930s (Harlan and Martini, 1936) but by the 1960s, modern plant breeding and land-use changes accelerated loss and stimulated the realization that genetic resources in regions of diversity were being lost at an alarming rate. To conserve the genetic variation within the cole group, a comprehensive base collection of the cultivated forms of Brassica oleracea has been established at the vegetable gene bank of Horticulture Research International (HRI), Wellesbourne, (U.K.). Gene banks have also been established at Instiuut de veredeling van Tuinbouwgewssen, Wageningen, the Netherlands and the Instituto del Germoplasm, Bari, Italy (Van der Meer et al., 1984) for conservation of genetic resources. The International Board for Plant Genetic Resources (IBPGR) has recognized HRI as an international centre for conservation of Brassica oleracea (Innes, 1975). Large number of collections of cole crops is also available with the United States Department of Agriculture, Plant Introduction Service. In India, National Bureau of Plant Genetic Resources (NBPGR), New Delhi has been assigned the duty of conserving the germplasm of all crops, including vegetables. Germplasm of all the cole crops is being maintained at the Indian Agricultural Research Institute, New Delhi (tropical types) and its regional station at Katrain (temperate types). Other major institutes maintaining germplasm of cole crops include Punjab Agriculture University, Ludhiana, G. B. Pant University of Agriculture & Technology, Pantnagar, Indian Institute of Vegetable Research, Varanasi, Dr. Y.S. Parmar University of Horticulture and Forestry, Solan and SKUAS&T, Srinagar.

1. Introduction

Heat transfer from a hot surface is a general method or technique of heating liquids and slurry type of food materials. In such cases the heat can be generated either directly by a heating element or indirectly from a hot medium like steam or hot water via a heat exchanger (e.g. shell and tube, plate). Therefore, for the heat transfer during heating by these techniques a temperature gradient will be required, which usually causes the fouling on the surface of the heating element or heat exchanger. Afterwards the fouling not only reduces the heat transfer rate but also results in quality deterioration within the product which is being processed. 

6.1 Introduction 
Lignocellulosic Biomass (LCB) generated from the global consumption of fruit and vegetables rapidly generates approximately 140 billion metric tons of agricultural waste. Environmental pollution associated with these wastes, like land pollution, and increased greenhouse gas emissions, can be reduced through the bioconversion of wastes (renewable biomass resources) into value-added products in biorefineries (Babu et al., 2022). These value-added products synthesized for utilization in industries such as biofuels, biomaterials, or biochemicals are effective, reuseable, and enhance sustainability. These bioproducts are recuperated into useful biomolecules and oils for the food industries and dyes for the textile industries. The sustainability of these products can be acquired efficiently through costeffective pretreatments and bioprocess optimization methods (Haldar et al., 2020). The initial stage of value product chain development is the process modelling and optimizing, which, due to its complex nature and large scale, faces challenges in raw material availability, cost competitiveness, upscaling, and lack of technological maturity (Gerassimidou et al., 2021). Optimization of production processes like fermentation and chemical synthesis for manufacturing value-added products has become a focal point in research enhancement of biorefineries. There has been a revolution in the technology used in process designing and manufacturing practices in biorefineries. Advanced Artificial Intelligence (AI)-based approaches like Genetic Algorithm (GA), Fuzzy Inference System (FIS), and Artificial Neural Network (ANN) are being utilized along with conventional tools to optimize variables interacting in production processes. These techniques increase overall efficiency and enhance prediction accuracy and output of value-added products (Banerjee et al., 2025). Optimization of the bio processes enables higher productivity in parallel with lower environmental burdens. AI-based approaches integrated with conventional approaches need a large amount of experimental historical data to be successfully carried out (Arias et al., 2023). Advancement of biorefineries due to the rapid demand of value-added products as well as a solution to the greenhouse emissions, the integrated application of AI for process analysis needs to be understood. This chapter is a contribution towards upscaling the current knowledge base related to different approaches for the enhancement of production for value-added products. The chapter discusses the conventional techniques for value-added production and various optimization models. There is further discussion of advancements in the traditional approach using AI-based approaches and their features and benefits in biorefinery. Apart from different AI-based models, AI integrated with life cycle analysis for sustainability is also briefed. Finally, the chapter addresses current limitations in the field and outlines potential future directions for research and development.

Abstract

Insect pests, fungi, bacteria and other injuries are found in all types of environment and affect the growth, production and survival of both plants and animal species in one way or other. Similarly a large number of insects belonging to different orders, families and genera feed on pods and seeds in natural/ during storage and cause injuries. Regeneration failure in several broad leaved and conifers in India and other countries by heavy insect attack in the natural stands at the time of inflorescence and seed formation and on the ground after seed shedding causes heavy loss to number of afforestation programmes. Several methods like chemical, cultural, natural and biological are available for reduction in loss caused to seeds by insects. Generally, earlier the control measure, the smaller the destruction. Forest seeds can be stored safely by taking some precautions before their final storage, viz. inspection of the seeds for their moisture content, visual examination of cleaning method, scanning through soft X-ray technique, thermotherapy or treatments with chemicals, etc. The present chapter has covered review regarding damage caused to seeds by different insect pests and their management options.

Abstract

Political participation of women, on equal terms with men, at all levels of decision-making is essential to achieve the principles of equality, sustainable development, peace and prosperity. Participation is a development approach, which comprises the involvement of disadvantage segments of population in the design and implementation of policies concerning their wellbeing. To achieve gender equality by 2030 requires urgent action to eliminate the many root causes of discrimination that still curtail women’s rights in private and public spheres. Discriminatory laws need to be changed and legislation adopted to proactively advance equality. 49 countries still lack laws protecting women from domestic violence, while 39 bar equal inheritance rights for daughters and sons. Based on data from 87 countries, 1 in 5 women and girls under the age of 50 will have experienced physical and/or sexual violence by an intimate partner within the last 12 months. International efforts through UN are being encouraged throughout the world but are constrained by lack of national policy, cultural factors, social factors, religious factors, economical factors and role of gender base patriarchy. Secular and sustainable democracy prevails only when women experience benefits equally with their male counterparts. Creating adequate space in politics for women participation is essential to sustain real democracy and oblige mothers, wives, daughters and sisters and Gender Responsive Governance is the best strategy for this which embodies measures, attitudes and practices of different stakeholders, both men and women, at different levels of governance with a clear purpose to impact issues that foster women’s empowerment and promote gender equity and social justice. It is a process that promotes and sustains the ability of women to fully participate in the governance and development process, enhances their ability to raise critical questions about inequality and violence against them without fear and pressure.

Carrot, radish, turnip and beet root are major root crops grown in India. In addition, root crops like rutabaga, parsnip, parsley, chervil and celeriac are grown in a limited scale in different parts of the world. There are several other roots and modified underground plant parts that grow in forests and consumed by tribes, but they are not commercially cultivated. Carrot, radish, turnip and beet root are generally consumed as cooked vegetables or fresh salads or as pickled vegetables.

5.1. Carrot

Carrots belong to the Umbelliferae family, named after the umbrella-like f lower clusters that plants in this family produce. As such, carrots are related to parsnips, fennel, parsley, anise, caraway, cumin and dill. Carrot, Daucus carota L. is believed have been primarily originated in Afghanistan, South western Asia and Mediterranean region. Daucus carota ssp. Carota is the most common wild form in Europe and South West Asia, and the present day cultivated carrots have most probably originated from this sub-species.

Haryana, Andhra Pradesh, Punjab and Tamil Nadu, Karnataka, Uttar Pradesh and Assam are the major producers of carrot in India.

Cultivars/Varieties: Varieties with long, orange coloured and smooth roots are preferred in India. Both indigenous and exotic varieties having different root length, shape and colour are grown. Temperate or European type varieties are Nantes, Half long, Early Nantes, Chantenay, Chaman, Pusa Yamadagni and Ooty-1, which require low temperature of 4-8°C for flowering. Tropical or Asiatic type varieties do not require low temperature for flowering and can be grown in plains also. The varieties belonging to this group are Pusa Kesar, Pusa Meghali and Hisar Gairic. Some varieties like Gold King, Indian Kuroda and Super Kuroda are also marketed by private seed companies.

Botanical Name: Camellia sinensis L.

Family: Theaceae

Chromosome No: 30

Place of Origin: China

Common Name: Tea

9.1 Introduction

Tea (Camellia sinensis L.) of family Camelliaceae or Theaceae is the oldest and second most widely consumed beverage in the world following water. Tea is an evergreen plant that mainly grows in tropical and subtropical climates. India is world’s 2nd largest tea producer after China with production of 1.25 million tonnes in 2020. In India it is grown in an area of 6 lakh hectares, contributing one fourth of world total tea production annually. Interestingly, India is also the world’s largest consumer of the beverage and using nearly 30 percent of the world’s tea output. India stands third in terms of tea export after Kenya (including neighbouring African countries) and China. The total tea export was US$ 501.16 million in April 2020 to November 2020 and for November 2020 it was US$ 71.61 million.

1. Introduction

Thermal processing treatments are the conventional methods that have been broadly employed in the food industry to guarantee the microbiological safety of food materials at a minimal cost. However, these thermal treatments cause undesirable changes in flavor, nutritive value, texture, or color of the finished product that impact food quality (Pan et al., 2017). Growing the modern consumer’s demand towards the minimally processed and “fresh-like” taste foods has challenged the food industry to develop novel non-thermal preservation techniques as an alternative to thermal processing. 

Introduction

The rumen ecosystem is essentially a fermentation system that houses a vast array of different microbes. Ruminants typically browse low energy forages, such as grasses or other plant material, rich in fibre but not easily accessible to the ruminant without rumen fermentation. These forages are literally food for the microbes present in the rumen first and then, in turn, the products of these microbes are the feed for the ruminant. Microbes break down forage in the anaerobic rumen environment and the products of microbial fermentation provide the ruminant with metabolisable compounds, such as short chain fatty acids, while the microbes themselves account for around 90% of the amino acids entering the lower intestine. There are many significant challenges to investigate rumen ecology.

Aquaculture is the culture of aquatic organisms per unit water area per unit time for maximum profit. The economically important finfishes and shellfishes, whose body physiology is adjustable to varied environmental conditions, are considered as aquaculture candidate species. So, an overall knowledge on the physiology of such species is required to improve the culture practices.

1.1. Finfish

A fish may be defined as a vertebrate, adapted for a purely aquatic life, propelling and balancing itself by means of fins, and obtaining oxygen  (O2) from the water for survival and life processes. As the fishes have fins, they are also known as finfishes. Fish describes a life from rather than a taxonomic group. They share certain features with other vertebrates. These are gill slits, a notochord, a dorsal hollow nerve cord and tail. In number of individuals, and may be also in number of species, fishes are presently superior to other vertebrates, including mammals. There are 20,000 different species of fishes. Fishes form largest group of vertebrates, Pisces. The various types of fishes differ so much in shape, color and size that it is difficult to believe they all belong to the same group of animals. Fish in general are cold-blooded and adjusted either to freshwater, brackishwater or marine environment.

INTRODUCTION

Narcissus is a hardy or tender herbaceous perennial, growing from bulbs and seeds. In India it is commonly called Nargis. The splendid yellow and white flowers of the narcissus alone could make April and May month of delightful sweetness in the garden. Shakespeare mentioned Narcissus again and again as common symbol of the English spring. Narcissus are highly suitable for rowin in beds ots under the deciduous trees, window garden, etc. They are very good cut flower and are sold in the market. The bulbs of the European species are used in folk medicine as these are believed to possess the purgative, dermal and depurative properties. Few species are used for extraction of essential oil in France. There is often confusion as to whether the name narcissus or daffodil should be used. Popular thought attached the former name to the sweet scented tazetta or poet narcissus and the latter to the small wild Lent Lily which is still to be found massed in the wood and open pastures. Today daffodil usually refers to long trumpet and large flowered garden forms while, all the rest are narcissus. In the simplest words, the species of this are called narcissi, although the trumpets, which have trumpet (corona or cup) as long as or longer than the surrounding petals are usually called daffodils.

Pomegranate (Punica granatum L.) commonly known as ‘Anar’, is an ancient favourite table fruit of tropical and subtropical regions of the world. It belongs to family, Punicaceae. There is a great diversity in pomegranate. Originated in southern Asia and said to be native from Iran to the Himalayas in the northern India (Sandhu and Gill, 2013). The orcharding of pomegranate is somewhat expansive and skilful job. The perennial nature of fruit take longer period to come to bearing stage (3-4 years). Thereafter due to neglect in management practices the annual production, many a times compels the orchardist have to go for distress sale of entire poor quality produce. But, the successful commercial fruit production with increased quality production has made significant contribution to economic development of the grower and ultimately those in the growing region in sustainable manner.

Botanical Name: Phoenix dactylifera L.

Family: Arecaceae

Chromosome No: 2n = 36

Place of Origin: Countries around Persian Gulf

10.1 Introduction

Date palm is a nutritive fruit rich in sugar and iron and predominantly seen in desert oasis. It is the main fruit crop in arid and semiarid regions, particularly in the arid regions of western Asia and North Africa. The palm tree is well adapted to desert environments that are characterized by extreme temperatures and water shortage. Beyond the arid climates, date palm can also be grown in many other countries for food or as an ornamental plant including the continents of Americas, Southern Europe, Asia, Africa and Australia. The majority of date palm growing areas are located in developing or underdeveloped countries where dates are considered the primary food crop, thus playing a major role in the nutritional status of these communities. By-products from date palm are used in building structures, animal feed, and also in several items such as baskets and ropes. The date palm tree has been in cultivation since 2400 BC. It is one of the oldest cultivated fruit trees on earth. India is the leading importer of dates. According to FAO statistics, in 2011 India was the largest world importer of dates (256,295 mt) and its neighbour Pakistan, in 2012, was the world’s sixth largest producer (600,000 mt). The major date palm growing areas in India are Kutch (Gujarat), Rajasthan and certain parts of the Punjab, as well as Tamil Nadu state to some extent. In Kutch, there are more than 2 million date palms, the majority of them grown from seeds and offshoots, providing a huge biodiversity for experimentation and improvement of products. Efforts by the Indian government in the last decade have resulted in an increase of date palm cultivation from 8,973 to 16,000 ha and establishment of a prominent effort in Rajasthan (Shah, 2014).

1. Introduction

In recent years, consumers have been demanding convenient, healthy and safe foods which have ’fresh-like’ characteristics with a long shelf-life. These demands include important food quality such as appearance, texture, taste and nutritional content which are strongly impacted by the way it is processed. Another major concern among the consumers is food safety and quality. The shelf-life of the food products are mostly influenced due to the action of various harmful microorganisms and enzymes. The conventional food processing technologies, such as thermal treatments (pasteurisation and high temperature sterilisation), evaporation, drying, frying and baking can assure the microbiological safety and/or stability of processed food products, but affects the food quality and nutrients (heat sensitive vitamins, flavour and other bioactive compounds) (Zhang et al., 2019)

Abstract

Limits to crop production are shrinking land area under cropping, shortage and higher cost of irrigation water, fertilizers, pesticides, electricity, labour wages and harvest and post harvest losses due to non-availability of cold chains and storage spaces. Diversification of crops to high value products is yet to gain momentum. Restrictions in marketing due to APMC acts are to be reviewed and drafted farmer-producer friendly. Forcing of horticultural crops-vegetables, fruits, flowers, spices, aromatic crops-to market fresh produces during off season is getting attention and many such units are established as a part of urban and peri-urban horticulture. Ready to assemble forcing structures are now available. Hi-tech nurseries, integrated soil and water management through fertigation, pests and disease management by bio-pesticides, predators and parasitoids, pheromones and light traps are successfully demonstrated. Space saving horticulture focuses on maximization of productivity and minimization of inputs costs in an eco-friendly and sustainable way.

ANTIBIOTICS

Antibiotic is a drug used to treat infections caused by bacteria and other microorganisms. Technically an antibiotic is a substance produced by a microorganism that selectively inhibits the growth of another. Penicillin was the first antibiotic discovered by Alexander Fleming in 1928, a significant breakthrough for medical science. Antibiotics had saved thousands of wounded soldiers in the I and II world wars. Also, use of it made surgery safer and increased the average life expectancy of human beings. Antibiotics are among the most frequently prescribed medications in modern medicine. Some antibiotics are ‘bactericidal’, meaning that they work by killing bacteria. Each type of antibiotic affects different bacteria in a different way. Some antibiotics can be used to treat a wide range of infections and are known as ‘broad-spectrum’ antibiotics. Others are only effective against a few types of bacteria and are called ‘narrow-spectrum’ antibiotics.