eChapters

Introduction

The fast development of technology for increasing production ignoring the agroecosystem resulted in disturbed natural cycles. The result is visible in terms of unsustainabiliity in agroecosystem. In addition, increasing use of chemical pesticides for the management of soil-borne plant pathogens had caused pollution of soil, surface and ground water besides affecting the crop produce and ecosystem. The pendulum of public opinion once so favourable to chemical control has gone against chemicals and advocated phasing out the chemical pesticides. Revival of the natural balance is therefore needed for sustainable farming with eco-friendly methods such as bioagents/biopesticides, soil solarization, botanicals, etc. Organic farming is one such approach which emphasis on maintaining the natural cycle with eco-friendly approaches.

1. Introduction

Cucurbits are group of plants belongs to family Cucurbitaceae which are mostly creeping or crawling in nature and distributed in tropical and subtropical zone of the globe. The family cucurbitaceae has around 120 genera and more than 800 species (Swarup, 2016). It holds the highest rank amongst all other plant families considering number and percentage of species used for human consumption either as fruit of the tender leaves and stems. Cucurbits have diverse daily use such as salad (cucumber and long melon); dessert (watermelon and muskmelon), curry or boil (bottle gourd, bitter gourd, sponge gourd, ridge gourd, summer squash, squash melon, pumpkin etc.); candy (wax gourd); pickles (pickling cucumber, pointed gourd); jam (pumpkin); utensil (bottle gourd), musical instruments (bottle gourd). From plant breeding point of view, the crops are cross pollinated and entomophilies.

ABSTRACT

Biofertilizers can supplement the chemical nutrients and helps in reducing the production expenditure in agriculture. Crop biofertilization with microbial consortia is an important strategy to improve the physical, chemical and biological conditions of the soil. The facultative methylotrophs are capable of fixing atmospheric nitrogen, besides it produces phytohormones viz; IAA, GA and cytokinin, vitamin B₁₂, polysaccharides, PHB, and siderophores. The essential nutrients are considered as the most important, among the factors limiting growth and yield of the tomato crop. The application of adequate amount of fertilizers is a pre-requisite for exploiting the genetic potential of tomato variety. Therefore, efficient and economic use of the fertilizer with microbial consortia would help in decreasing the input costs for raising bumper crop.

More number of studies carried out on the effect of facultative methylotrophs in different parts of the world and in India. The results confirmed that the facultative methylotrophs have a greater importance in increasing the growth and yield of various crop plants. Keeping this in view an experiment was conducted to find out the interaction effect of facultative methylotrophs with other bioinoculants viz., Azospirillum, Azotobacter, PSB and VAM (by seedling dip method followed by PPFM phyllosphere spray) on yield of tomato var Ruchi. The results showed that the treatment with above microbial consortia (50.71 t/ha) was found to increase the yield of the tomato crop by 62.73 percent over uninoculated control (18.90 t/ha) and individual treatments.

The hot arid regions of India are spread over 32 million hectares in the states of Rajasthan (61%), Gujarat (20%), Punjab (5%), Haryana (4%), Karnataka (3%) and Andhra Pradesh (7%). The arid regions of western Rajasthan experience an annual rain fall between 100-500 mm with a coefficient of variations varying from 40-70 per cent. Low and erratic rainfall coupled with extreme temperature results in complete or partial crop failure, considerably affects the agricultural economy of the region. High wind velocity causes wind erosion and shifting of sand dunes covers the fertile agricultural land and canals (Rao and Singh,1998). The rise in temperature begins from March onward and attains its peak in May as high as 46°C. The transpiration is low during winters but during summer in months (May & June), it reaches up to 16 mm per day. The annual estimated potential evapotranspiration values ranges from 1600 mm in eastern part and 1800 mm in western part of the region.

In the arid regions of Rajasthan, Haryana, Punjab and eastern part of arid Gujarat the soils have developed from alluvial and aeolian parent materials. In context to the type of soils light brown sandy soils with dune dominance is 30.6 per cent and associated others 34 per cent area, light brown soils 1.7 per cent, Grey brown soils 13.6 per cent hard pan in 5.9 per cent and seirozems in 1.7 per cent area (Dhir, 1977). Kolarker et al. (1989) reported that in 12 district of Rajasthan sandy soils dominated in 14.3 million ha. These soils are poor in fertility very low organic carbon (0.03-0.1%), light in texture called desert soils (north western) in the order of aridisols. It has undulated topography with the dominance of sand dunes inter-dunal plains. About 80 per cent area falls under rain fed cropping and moth bean, cluster bean, pearl millet, and sesame are the main crops grown during kharif season after the onset of monsoon. Under the vagaries of monsoon and recurrent drought the rain fed cropping becomes a gamble, which creates severe food and fodder scarcity in the region.

ABSTRACT

The popularity and belief in natural and herbal healthcare systems is inseparable from traditional ethos and practices in India. India has been known to be a rich repository of medicinal plants since time immemorial. Now many countries like China, Cuba, India, Sri Lanka, Thailand etc. have endorsed the official use of traditional system of Medicines in their healthcare programmes. The western system of medicine (allopathy) too has a large component of plant based drugs and most potent medicines use specific chemical constituents which in turn has generated bulk demand. A dramatic increase in exports of MAP’s (medicinal and aromatic plants) attests to global interest in their products as well as in the traditional health system. Past efforts of 27 years in agroforestry research and extension is now yielding results; Agroforestry is coming up in private as well as community lands in a big way for both subsistence as well as commercial purposes. Incorporation of medicinal plants in agroforestry will not only diversify the cropping system but will also lead to conserve and reduce pressure on medicinal plants in forest besides improving economic status of the farmers.

Introduction 
It is commonly acknowledged that the swift rise in urbanization and population expansion is the primary reason for the increasing consumption of fossil fuels, which ultimately results in the exhaustion of fuels generated from petroleum. Globally, the scarcity of fossil fuels poses a significant challenge. Furthermore, there are significant worries about the negative impacts of the heavy reliance on petroleum-based fuels on the economy, energy and the environment conservation. Consequently, extensive research has been dedicated to identifying alternative sources that can mitigate the dependence on fossil fuels [1]. Biofuels have garnered worldwide attention as a potential substitute for fossil fuel-derived fuels, given their distinctive qualities [2]. Utilizing a variety of plant sources, including sugarcane, corn, soybeans, vegetables, palm oil, and Jatropha (often used in Africa), biofuel production is progressing on almost every continent. Bioethanol is successfully used as a biodiesel in addition to gasoline for otto-cycle engines in nations like the USA and Brazil [3]. Conversely, biodiesel represents a significant category of biofuel capable of partially or fully replacing diesel obtained from fossil fuels. Biodiesel is made via a process called trans-esterification that uses renewable biolipids [4]. Biodiesel can be produced from oil that comes from nonedible agricultural seeds or kernels [5]. Furthermore, edible oils from plants such as sunflower, palm, and soybean are used as feedstocks to produce biodiesel [6]. In the field of biofuel research, nanotechnology and nanomaterials have proven to be useful instruments for improving output quality at a reasonable cost. Algae stands out prominently in discussions about biofuel production due to concerns related to food resources. Types of biofuels and their sources are represented in the (Fig.1). The use of crops and plants yielding food is considered unsuitable for prioritizing biofuel production due to potential disruptions in food supply. Notably, various algal species vary in their production capacity. The utilization of nanoparticles (NPs) is advantageous in biofuel synthesis due to their unique characteristics, including a substantial surface area to volume ratio, adsorption capacity, high crystallinity, and stability. This distinguishes them from competing sources as better possibilities [7]. In the process of creating biofuels, metal oxide nanoparticles and carbon nanotubes are widely used as nano-catalysts because of their extra characteristics that allow for their high potential recovery [8]. The overall procedure for producing biodiesel on a small scale and for experimental purposes using algae are shown in the (Fig.2).

Introduction 
The overuse of fossil fuels is expanding simultaneously with society’s rapid development, which culminates in a decrease in fossil energy and a very serious deterioration of the environment. The purpose is to make the carbon neutral as fast as possible, which will make the invention of alternative energy sources to replace the fossil fuels. To make world a better place to live, fossil energy is highly needed to be conserved and measures should be made to limit the use of fossil energy. After many researches, the alternate to fossil energy has been made in the form of “BIODIESEL”. Biodiesel, which is produced from renewable resources such as vegetable oil is a new clean alternative to fossil fuel. Biodiesel in the new era of scientific field is mainly produced from Microalgae. Production of biodiesel from microalgae ensures reusing carbon resources from nature. This method contributes to achieve in replacing petroleum use and also helps in reducing pollution in the environment. Biodiesel consist primarily of esters which is formed by methanol or by ethanol and long chains of fatty acids which may be saturated or unsaturated such as palmitic acid, stearic acid, oleic acid and linoleic acid. This is the main and ultimate reason why production and use of biodiesel is attracted the attention of researches worldwide. The biodiesel is developed in three generations that is First, Second and Third generation Microalgae are single-celled organisms which are microscopic. They are an essential component of carbon cycle and they can exploit carbon sources in water and soil efficiently and have plenty of advantages over the other biodiesel sources that are conventional oil crops such as wheat, palm, corns, soybeans, maize and rapeseed. In this century, one of the most important environmental issues is global warming, that is caused by released of greenhouse gases. These microalgae have high rates of biomass production and can survive in a variety of circumstances, such as freshwater, saltwater, and wastewater (Muhammad Abdullah et.al 2024) Their ability to be grown on non-arable ground and their lack of resources competition with food crops are two of their most significant and crucial advantages. The process of producing biodiesel from the microalgae involves many stages. The stepwise structure involves lipid extraction, microalgae cell disruption, harvesting, culture and transesterification. Microalgae re a promising source of biodiesel as they have a high lipid content and can grow quickly. But they are complex in composition and they require a specialized harvesting system. Nanoparticles are an ultrafine unit and have dimensions which are stated in nanometers. These nanoparticles can be detected in the natural environment and can also be generated by human activity. Because of their sub-microscopic size, they boast unique material properties and may be used in many different kinds of fields, namely environmental remediation, engineering and medical care. In 2008, International Organization for Standardization (ISO) defined this nanoparticle as a discrete nano-object in which all the Cartesian dimensions are less than 100nm. Nanoparticles are classified into different types according to their shape,

Introduction

Pheromones are chemicals emitted by living organisms to send messages to individuals of the same species. The class most widely explored are the sex pheromones produced by female moths which are used to attract conspecific males for mating. Bombykol, the sex pheromone of the silk moth, was first synthesized in 1959.

During the past 40 years, pheromones of hundreds of insect species have been chemically elucidated, including the sex pheromone of the codling moth. Its main component is (E, E) 8, 10-dodecadien-1-o1, a primary alcohol containing a straight chain of 12 carbons and two conjugated double bonds. Other moth pheromones are hydrocarbons, epoxides, acetates or aldehydes. These molecules all vaguely resemble fatty acids, from which they are indeed biogenetically derived.

Most pheromones consist of blends of two or more chemicals which need to be emitted at exactly the right proportions to be biologically active. The female effluvia or sex gland can contain additional compounds which are related to the pheromone components and whose biological function is often unclear. On the other hand, many attractants of male moths have been discovered simply by field screening. In several cases it could later be shown that the attractant found with this technique was identical to the natural pheromone produced by the female. In most others, the composition of the true pheromone is still unknown.

ABSTRACT

To study the antagonistic potential of rhizobacteria against the soil borne pathogen Rhizoctonia solani, soil bacteria were isolated from the rice fields of Agricultural Research Station, Mannuthy and screened against R. solani. Out of the 22 rhizosphere bacteria, 10 were found to be antagonistic to R. solani. Seven belonged to the genera Bacillus, Pseudomonas, Clostridium and Sporosarcina and the rest three being unidentified. The bacterial isolates viz., 2B, 4B, 19B (Bacillus sp.), 28B and 10B (Sporosarcina sp.) showed increase in inhibition on extending the period of incubation. Maximum inhibition was expressed by 2B on the third day of inoculation followed by 4B, 10B (Sporosarcina sp.), 7B (Bacillus sp.) and Pseudomonas fluorescens. The bacterial isolate 4B and 7B (Bacillus sp.) and 10B (Sporosarcina sp.) completely prevented the sclerotial production of R. solani whereas 1B (Clostridium sp.), 2B, 19B (Bacillus sp.) and P. fluorescens delayed the sclerotial production. Pot culture studies also confirmed the superiority of these rhizobacteria in controlling the infection by R. solani. The potentiality of these rhizobacterial antagonists can be exploited for the management of soil borne pathogens like R. solani.

ABSTRACT

Natural sources have been exploited since the dawn of civilization for the sustenance of mankind. With the passage of time numerous medicines were discovered to treat various maladies utilizing the vast resources of land and the sea, along with the knowledge base support of folklores and folk medicines of different regions of the world, Marine natural products chemistry has gained prominence during the last four and half decades with a view to harnessing the vast potential of the sea particularly in search of drugs by virtue of modern science and technology. Products of marine algae or seaweeds have been used as medicine as well as food and feed and latterly as nutraceuticals. Advanced societies of the world consume seaweed extracts (in the form of alginates, agars and carrageenans) every day in their foods or pharmaceuticals that is complemented by the excellent safety records of commonly ingested species. In this account, I will be focusing on the health care applications of seaweeds.

Health care has two aspects e.g. healing or amelioration of disease conditions with medicines and the other being sustenance of the health system. Seaweeds have been reported to be the source of many bioactive and nutritionally important compounds e.g. antibacterial, antiviral, immunomodulator, cytotoxic, anticancer, neurotoxic, blood anticoagulant, antifertility, vitamins, proteins and minerals. Status of these activities in India and elsewhere in the world has been discussed.

Introduction

The horticulture sector is contributing over 30 per cent share in agricultural GDP of the country. Presently, India producing about 351.92 million tons of horticultural produce from 28.04 million hectare which has surpassed the food grain production for last five consecutive years (Anonymous, 2023). Horticulture sector has been identified by Government of India also identified horticulture as one of the vital sector for entrepreneurship development, employment generation, livelihood and nutritional security, doubling farmer’s income, achieving SDGs of the United Nations.

Fruits and vegetables have become part of a modern healthy lifestyle as they possess high amounts of minerals, especially electrolytes, dietary fiber, phytochemicals, especially antioxidants, and vitamins (Yahia et al., 2019; Krishnan Kesavan et al., 2023). In consumption, the qualities of products play a critical role in consumers’ choices, which are directly related to health problems (Tian, and Xu, 2022). Bioactive compounds are phytochemical substances present in small quantities in plant materials that can provide biological activity, being generally associated with health benefits, including hepatoprotective, anti-inflammatory, antioxidant, antithrombotic, anticarcinogenic, antidiabetic and prevention of cardiovascular and degenerative diseases (Campoli et al., 2018). Therefore, maintaining high-quality fruits and vegetables is very important for the fruit and vegetable industry. This requires some methods to evaluate the quality of fresh fruits and vegetables during their post-harvest manipulation and storage and before their industrial processing as well (Tian and Xu, 2022).

Introduction

Integrated farming systems (IFS) generate a large amount of organic waste matters. In general, these residues should can be reprocessed appropriately within agri-business systems to fulfil the nutritional and energy demands in the enterprises (IFS) in order to increase productivity. To reduce the heavy consignment of organic waste matter from the Integrated farming systems, The Multi Resource Vermicompost (MRV) was defined by the IFS as an organic fertiliser made from waste produced in crop production, farm animals, agriculture, and vegetation through bio-oxidative degradation processes facilitated by earthworms and microorganisms in the soil.

1. INTRODUCTION

The terms antioxidants and free radicals are being very effective used nutritionists and other health professionals. Antioxidants are compounds are good for health and free radicals are harmful. In general, antioxidants neutralize free radicals that are generated in the body and prevent damage to cell proteins, lipids and carbohydrates. Antioxidants can be water-soluble or lipid-soluble, thus they exist within the lipid or within the water portion of cells. Antioxidants are substances when present in food or in body at low concentration retards or prevents undesirable oxidation of substrates by free radicals.

Within the human body, millions of processes are occurring at all times. All cells require oxygen to generate energy; higher eukaryotic organisms cannot exist without oxygen. Unfortunately, that same life giving oxygen can create harmful side effects which cause cell damage and lead to chronic disease. Damage caused by free radicals is called oxidation. Oxidative stress is the disturbance in the prooxidant-antioxidant balance in favour of the former, leading to the potential damage.

INTRODUCTION

Rajasthan is the largest state of the country with a geographical area of 342,239 Km₂ which constituents 10.41% area of the country. The state can be divided into four major regions; the Western desert with barren hills, level rocky and sandy plains; the Aravalli hills running south west to north-east; eastern plains with rich alluvial soils; and south-eastern plateau. The state has varied climate from semi -arid to arid. The average rainfall in the state ranges from 480 mm to 750 mm, being as low as 150 mm in arid region and 1000 mm in south-eastern plateau (FSI 2009). The recorded forest area is 32,639 Km2 which is 9.54 % of the state’s geographical area. The maximum forests are found in the Districts of Alwar, Banswara, Baran,, Bundi, Chittorgarh, Dhaulpur, Dungarpur, Jhalawar, Kota, Rajasamand, Swaimadhopur, Sirohi and Udaipur. The hot arid and semi-arid regions in the country accounts for 20 % of the country’s geographical area spread over seven states namely Rajasthan, Gujarat, Andhra Pradesh, Punjab, Haryana, Karnataka and Maharashtra. It comes nearly 31.63 m ha out of which 19.61 m ha alone is in the states of Rajasthan (62.00 % of total arid region). This area is characterized by low erratic rainfall, high temperature and wind velocity, coarse textured soils with low organic carbon and soil fertility status and poor water holding capacity. The underground irrigation water is limited and highly saline in most of the cases (Chandra 2005). Mono-cropping is a gamble in arid tract of Rajasthan due to low and erratic rainfall and frequent occurrence of drought during crop growth period leading to complete crop failure. To avoid complete crop failure the farmers are adopting mixed cropping system from very ancient time. But the system is not perfect during the adverse climatic situation due to low yield, long duration of traditional varieties and unmatched crop combinations. Therefore, in mixed or multi cropping system, the choice of drought hardy, short duration varieties of crops are necessary to ensure the production of crops even under adverse situations. It has been seen that drought occurrence during month of July and August leads to 67-100 percent decrease in production of pearlmillet and short duration pulses which are the main crops of the region grown under rainfed condition.
The people in arid regions of India, since time immemorial has developed location specific agroforestry systems. The scattered trees /shrubs in the agricultural fields are common features of the landscape. Since the beginning of cultivation the farmers deliberately allowed the trees/shrubs to grow with crops. These trees provided them insurance during drought years and provided fodder, fruits, vegetables, timber, fuel, fiber etc. during lean period.

Abstract

Trichoderma species play a vital role in the management of plant diseases in association with different commercial bioformutlations of the fungus. Its role as a successful pollution free environment and friendly mechanism of action has been highly exploited. The diversity of species based on location, type of agri-land and association with different fauna  and flora has been instrumental in large upsurge of biological methods of Plant disease management. Pollution of agri-land soils with chemicals, heavy metals and development of resistance to diseases has become an emerging problem coupled with the high costs of Infrastructure. Thus, the interest in alternative biologically based systems is the need for bioremediation, bioecology and biocontrol with Trichoderma.

In tropics, many crops are grown for their edible roots or tubers. Broad group of “tuber crops” encompasses a wide range of starchy food crops, some of which are true botanical roots and some others are stem tubers or corms. In global scenario, they are in a neglected state mainly due to their negative image as poor people’s food. They are highly perishable and are normally consumed locally in fresh or home processed state. It is time to bring out the positive attributes of these important foods and the increased contribution they can make to the nutritional welfare, food security and economic wellbeing of people, especially in developing countries.

When a metal M is immersed in a solution containing its own ion Mⁿ⁺, then  an electrode potential  develops. The value of  the  electrode potential  is given by the Nernst equation.

Cookware is food preparation equipment, such as cooking pots and pans, used in kitchens. There are several different types of pots and pans- nonstick, ceramic, stainless steel, cast-iron and more. If you’re only going to buy one, we suggest a heavy-duty, try-ply or multi-clad stainless steel pan. They’re expensive, but they’ll last a lifetime with proper use.

Potting and repotting is an essential practice to be done in a nursery to maintain the expected vigour of the plant. When a seedling from a seedbed or plant from a flat bed or raised bed is planted in a pot, it is called potting. The same term is utilized when the bulbs of bulbous plants are planted in a pot. When a plant is transferred from one pot to another pot, it is called repotting. At the time of repotting the plants may be planted in a large pot or in the same sized pot. Repotting is necessary when

1. Plant is grown for a season or a year in the same pot and becomes pot bound resulting in extensive growth of roots in rooting media and there is very little scope for further fresh growth.
2. When a plant is overgrown and requires separation or division.
3. When soil gets depleted of its nutrients.
4. Repotting affords an opportunity to the roots to form a new root growth, as repotted soil contains sufficient amounts of nutrients and good aeration.

Purpose- Burnt porous clay or cement or plastic pots are commonly used for various purposes in horticulture. The pots are used in propagation or plants, cultivation of ornamental plants and flowering annuals. Growing of plants in pots in referred as pot-culture. In pot-culture, operations such as potting, shifting and filling of pots are very important. Potting refers to planting of plants in pots containing soil mixture, while shifting means removal of plants from pots and planting them again in the same or different pot. Plants growing for more than one year in the same pot need shifting. The time for potting and shifting of plants is monsoon season (July to Sept.) and during spring (Feb-March).

Materials and Equipments-Flower pots, crocks (broken pieces of pots), potting mixture, khurpi and watering can (with fine nozzle).

Mixed and Integrated Poultry Farming

Mixed farming refers to the practice of cultivating crops and rearing livestock on the same farm, aimed at maximizing economic benefits through the efficient use of resources. This type of farming can be practiced either simultaneously or at different times, depending on the needs and conditions. In India, mixed farming is particularly significant as it typically contributes at least 10% of a farmer’s income from livestock, potentially reaching up to 49%.

Advantages of Mixed Farming

• Maximized Returns: By-products of farm activities, such as crop residues, can be effectively utilized to feed livestock, leading to higher returns.

• Year-Round Employment: Mixed farming provides continuous work opportunities throughout the year, ensuring a steady income.

• Efficient Resource Utilization: The combination of crops and livestock ensures optimal use of land, labor, and capital.

• Soil Fertility: Livestock manure contributes to maintaining and enhancing soil fertility, which is crucial for sustained crop production.

• Balanced Food Production: Mixed farming allows for the production of a variety of food items, leading to a more balanced diet throughout the year.

For maximization of productivity in any kind of poultry venture the knowledge on the behaviour of birds and its application play very significant role. Behaviour is the reaction of the whole organism to certain stimuli, or the manner in which it interacts to its environment. Behavioural patterns are not inherited as such, but develop through the process of growth and get differentiated under the influence of genetic and environmental factors. Primary function of behaviour is to enable the bird to adjust itself to some changes in condition, whether external or internal. Most animals have a behavioural pattern which can be tried out in a given situation and in this way they learn to apply one or the other according to that which produces the best adjustment.

Origin of Fowl

Domestication of poultry seems to have been undertaken in south-east Asia. The chickens were brought to India by 1000 BC, and later on they spread north, westwards and reached Greece by 525 BC. By the beginning of Christian era, the birds were already popular in West Asia and East Europe, and then gradually reached South Africa, Australia, Japan, USSR and USA.

Red Jungle fowls are the ancestors of the present-day poultry breeds. There are four known species of wild fowl and they belong to the same genus “Gallus” meaning a cock. The four species are as follows:

The Red Jungle fowl is supposed to be the main contributor for the development of modern-day poultry and is widely distributed throughout Burma, China, India, Philippines, Sumatra and Thailand. The plumage (colour of the feather) of females resembles that of Brown Leghorn, the males have orange red feathers in hackle, wing bow and saddle regions, while the breast is black. Eggs are buff (off-white) in colour. The legs are slate (dark bluish grey) coloured. The comb is all red.

Genetic Classification of Poultry

Understanding the genetic classification of poultry is essential for breeders and farmers to optimize the performance and standards of different commercial breeds. Here’s a detailed overview:

Evolutionary Background

• In the process of evolution, cold-blooded (poikilothermic) reptiles are considered the ancestors of birds.

• Birds are warm-blooded (homeothermic) feathered creatures adapted for hot and dry climates in their terrestrial habitats.

Chromosomal Categories

• Sex Chromosomes: Carry genetic material that determines the sex of an offspring.

• Autosomes: Non-sex chromosomes that carry the bulk of genetic information.

Poultry meat-50 g for each method
Cook the poultry meat according to the methods given in the table and record the cooking effects

Abstract

Climate change and variability can adversely affect the poultry production in India, because birds can only tolerate narrow temperature ranges. Thermal stress on poultry is major concern. Heat and clod stress can cause immunosuppression and make birds more prone to infectious diseases. Climate change affects the occurrence, distribution and prevalence of poultry diseases.  Nutritional strategies aimed to alleviate the negative effects of heat stress by maintaining feed intake, electrolyte and water balance or supplementation of micronutrients such as vitamins and minerals to satisfy the special needs during heat stress have been proven advantageous. Ventilation and cooling methods are essential for birds to survive high summertime temperatures. Tunnel ventilation coupled with evaporative cooling is very effective in keeping birds cool during hot weather. The increasing proportion of poultry production in tropic and subtropical region makes it necessary to reconsider the selection strategy and potential use of naked neck and frizzle genes for improving heat tolerance in chicken.

18.1 Introduction

The egg industry has grown quickly in the last decade as people’s eating habits have become more aware of the importance of good and nutritious diets. Eggs are now widely accepted as a good source of high-quality protein. However, at the same time, the eggshell that pollutes the environment is discharged into the open. This eggshell waste can be used to make a variety of items, including pharmaceuticals and medicines. Additionally, this raw material is inexpensive and conveniently accessible. Eggshells are ranked as the fifteenth biggest environmental pollutant.

Introduction

Civilization of mankind began with the process of domestication of livestock and poultry. The Indian Red Jungle fowl is considered as the ancestor of modern day chicken breeds. Chickens were first domesticated in S E Asia (India, Southern China, Burma, Malaya region) between 5000 – 3000 BC and then spread westwards and then Africa, Europe and America. Poultry in India was a leisurely and backyard village venture till sixties. The entire poultry scenario of Indian sub-continent changed only in last 4-5 decades and now India ranks 3rd in egg production (3.9%) after China (45%) & USA (8%) and 5th in broiler production (3.3%) after USA (26.5%), China (17%), Brazil (15.5%) & Mexico (4.3%) with about 54,000 and 1800 million eggs and broilers produced annually. But in terms of per capita availability it ranks amongst the lowest. Poultry production systems of the developing nations including India can be broadly categorized into two distinct classes: one - low external input traditional family poultry production system or free range or backyard poultry in unorganized sector in the villages and the other one is high input industrial or intensive poultry production system in urban and peri-urban areas. The former is highly unorganized and consists of thousands of small holders (5-15 birds) where birds scavenge and forage on house-hold wastes, shrubs, weeds, crop residues, insects and aquatic plants with no or little external inputs.

Introduction

A hatchery is such a facility where eggs are hatched under artificial conditions, especially those of poultry eggs. Poultry hatchery produce a majority of bird’s chicks by hatching their eggs including chicken, turkey, ducks, quails, goose and some minor bird species. A broiler breeder produces about 150-180 fertile eggs in a year of reproductive life. This reproductive capacity can’t be utilized without liberating the breeding hen from incubating eggs. In India, there is huge demand of day old chicks for commercial poultry farming and for that there is great scope for hatchery business. The competition in the hatchery industry is increasing day by day for efficient production of quality chicks economically. Therefore, it may be necessary for the hatchery man have thorough understanding of the basic and practical aspects of incubation and hatchery operation for efficient working.

Housing of Poultry

Proper housing is essential for successful poultry farming, as it directly impacts the health, welfare, and productivity of the birds. Well-designed poultry housing not only provides protection and comfort but also ensures efficient management and optimal environmental conditions for the flock. This chapter explores the key aspects of poultry housing, including its purpose, site selection, and layout considerations.

Purpose of Poultry Housing

• Protection and Comfort: Provides a safe environment that shields birds from predators, harsh weather, and other external threats.

• Health and Welfare: Ensures optimal health and well-being by preventing diseases and reducing stress.

• Management: Facilitates easy and efficient management of the flock in a controlled and scientific manner.

• Cost Efficiency: Reduces overall production costs through efficient resource management.

Housing constitutes the second largest component of cost of poultry production. An ideally located and well planned poultry farm is an essential requirement for efficient egg and meat production. Poultry housing normally serves the following major functions:

Provides shelter and protection to the birds

Provides comfort to the birds.

Helps in organization of large flock into a manageable unit.

In India, poultry judging refers to selection of birds on the basis of their physical appearances, breed characteristics and production performances; however, in other countries, like USA judging is also used for eggs, carcasses and further processed products. The Directorate of Extension, Ministry of Agriculture, Govt. of India annually conducts livestock and poultry shows in various parts of the country in collaboration of state governments. Besides, state Agricultural/ Veterinary Universities or other institutions also conduct such shows. In these shows judging contests are carried out mostly for the undergraduate students by using a score card to grade birds either for production characters or breed characters. The winners are awarded trophies and cash prizes. The birds meant for judging are kept in individual cages and the participants are requested to score under various sub-headings and to finally rank the bird. Any deviation from “ideal” or “perfection” (as described by the American Standard of Perfection or the British Poultry Standards) but not serious enough to constitute a disqualifications in the show room is considered to be a defect. Serious defects are regarded as disqualifications and will bar a bird from winning any prize. Both layers and broilers can be physically evaluated for their performance rating.

1. Rearing of fowls for eggs and flesh is known as  ….

 a) Poultry keeping b) Husbandry   

 c) Sericulture d) Apiculture

 2. The types of poultry birds are  ….

 a) Broilers b) Layers  

 c) General purpose birds d)  All of these

 3. The layers are reared mainly for  ….

 a) Flesh b) Eggs  

 c) For both d) None of these

 4. Which of the following are layers?

 a) Anconas  b) Australorp   

 c) White leghorn d) All of these

 5. Broilers are reared for  ….

 a) Flesh b) Fish  

 c) Ornamental purpose d) All of these

Management of the poultry house environment forms an essential aspect towards maximizing production performance. Generally, proper maintenance of poultry litter is seldom given emphasis. The condition of litter significantly influences bird’s performance and ultimately affects the economy for rearing. The litter is defined as the bedding materials of around 5-6 cm height consisting of locally available materials like rice husk, peanut hull, wood shavings, paper shreds, sawdust or groundnut hulls. These materials can be used alone or in combination to rear the birds on floor under deep litter system of management. The excreta, feathers, spilled feed and water are mixed with bedding material, get further decomposed due to heat and bacterial action resulting in built-up-litter towards the end of rearing.

The review provides an explanation of the Indian poultry market’s trend in management. Everything you need to know about diseases, their attacks, processing, production, feeding, and market trends is included in this review. For farmers, raising poultry is a vital source of revenue that allows them to meet their basic necessities. Because of the high consumption rate and current population growth, there is a sharp increase in demand for chicken meat. Meat consumption is required to provide additional nutritious intake. Generally speaking, the poultry sector plays a critical role in creating micro and macrobusiness opportunities and enhancing human nutrition. The Indian economy is dominated by small-scale commercial ventures for women and the delivery of manure for agricultural purposes. Animal health is ensured by the supply of high-quality feed, which maintains nutritional values. The weight and age of the chickens, their rate of development, the quantity of eggs they produce, the climate (cold or rainy weather increases energy consumption), and the amount of nutrition they acquire from foraging all affect how much feed and how much nutrition it contains. This review article includes general information about poultry

Introduction

Poultry farming is an emerging activity for enhancing nutrition and providing livelihood support to the farmers of this country. Since two decades, this component emerge as the fastest growing segment of agriculture where the broiler segment having a growth rate of more than 10% and the egg production 5-6% per year. As per the report by USDA’s Agricultural Marketing Service, India has one of the world’s largest and fastest growing poultry, ranked third in egg production (FAOSTAT) and sixth in broiler meat production. Poultry farming is lucrative because there is minimum investment to start, rapid return, high feed conversion ratio and provides continuous source of income for the farm.

2.1. Breeds of poultry

Poultry sector has been divided into two broad classes based on the management practices. First one is commercial poultry farming which is the well-organized sector. Second one is backyard poultry farming which plays supportive role for rural economy. The commercial farming practices can divide into two subclasses: layer and broiler industry. Commercial poultry farming provides primary source of income to the farmers and widely influenced by market driven forces. Backyard poultry farming comprises dual purpose birds as both layer and broiler. It supports the rural household with nutritional security, subsidiary income generation and provides the employment to women which
Egg production by backyard and commercial poultry farm
Out of total egg production of 103.3 billion numbers eggs, commercial poultry farming is producing 84.91 billion number eggs whereas, backyard poultry farming is producing 18.41 billion numbers contributing 82.2 percent and 17.8 percent of total production of egg respectively (BAHS, 2019). 

Poultry is one of the fastest-growing industries within agriculture and allied sectors worldwide. This rapid expansion results in the generation of substantial amounts of waste, including poultry manure, dead birds, hatchery wastes, and abattoir wastes. Proper treatment and scientific disposal of these wastes are crucial to avoid significant threats to both avian health and human safety. Unmanaged poultry wastes can lead to the spread of diseases among birds, resulting in considerable economic losses due to mortality and decreased productivity. Additionally, improper waste disposal can contribute to soil and groundwater pollution. Globally, an estimated 400 million chickens are processed weekly, generating a vast amount of waste. For instance, a broiler produces about 0.09 kg of manure daily, while a laying hen produces around 0.18 kg. Effective management of poultry waste requires a comprehensive understanding of its composition and the various physical, chemical, and microbiological processes that influence the fate of potential pollutants, particularly when the waste is applied to land.

Abstract

Various studies put the percent of rural women engaged in agriculture and related activities in India around 65-70%. A majority of them are from economically and socially deprived category and qualify as “poor” or below poverty line. In rural India women play the role of agricultural labourer, fuel gatherer, food provider and home maker. Both central and state governments have framed and implemented various programmes to improve the living conditions of rural people. Measures have also been taken to provide employment and alleviate poverty. Generally these programmes fall into the category of wage employment, self-employment, housing and habitat development, and watershed development programmes. The last mentioned focuses on various water supply schemes to the rural poor and socially deprived. These programmes are evaluated in this paper. Although they are intended to benefit all the poor and jobless in rural Karnataka, the benefits reach women too because of their role as homemakers and food providers. Be it wage earned or drinking water or shelter, these programmes, if implemented sincerely, make the life of farm women less laborious and more comfortable.

I. INTRODUCTORY OUTLINE

The post-Vienna legal phase is remarkably known for revolutionary changes across the global wherein the third generation of human rights became the hallmark for the comity of nations and a liberational instrument to come out of nightmarish experiences of poverty and hunger.1 On the other hand the post-GATTised legal ordering is known for much publicized and debatable conclusion of Trade Related Aspect of Intellectual Property Rights (TRIPs) and creation of World Trade Organisation (WTO).2 This new jurisprudential polemics soon evoked fierce scrutiny from the stand point of human right and poverty among third world countries.3 At home, it is dubbed as ‘bleeding operation with the dubious promise of benign global competition’, ‘de facto nullity of constitutional goal of social welfare’ and ‘contra- constitutional coup.4 Since India has become a member of WTO it indulged into massive rehabilitation and fundamental mutation of IPR regime. Despite the fact that it has a stark distinction of being a grain- surplus and food and livelihood insecure country. An inventory of over forty five million tonnes of wheat and rice in granaries remains ready for consumption. On the other hand over two hundred fifty million people generally go to bed partially hungry every day. There is a near consensus on the need to banish hunger but the realities on the ground remain that even at the risk of raising hopes the goal of food security may not be realized for generations.5 At home under the cover of food security the government is keeping millions of tonnes of food out of reach of the poor people.6 In fact India’s record breaking 200 plus million tonnes harvest is the result of steep fall in purchasing power of poor. The myth of surplus is based on sending hundreds of millions of human being hungry to their beds.7 Taken to its logical end we have abundance of food, surplus of hunger and scarcity of vision under the garb of food security.8

INTRODUCTION
A PTO (Power Take Off) in a tractor transfers mechanical power from the engine to various tractor implements or attachments, such as a rotavator, thresher, straw reaper, or super seeder, through a PTO shaft. In India, the PTO is typically located at the rear of the tractor, while in several other countries, a front PTO is also available to power front-mounted machines. Different PTO-driven implements require varying amounts of PTO horsepower (HP) for operation. PTO horsepower indicates the power available for driving tractor attachments, and it is transmitted to these implements via the PTO shaft.
The rear-mounted power outlet, known as the PTO, is used to operate PTOdriven implements like a rotavator, power harrow, and baler. Tractors are used not only for towing implements for tillage and sowing but also for stationary tasks such as crop threshing and water pumping from tube wells, which are powered by the PTO. The PTO-driven implements require a specific amount of horsepower, referred to as PTO HP, to function. This PTO HP is the portion of the engine power used to operate the implements, and it is always lower than the tractor’s total horsepower due to friction losses. Additionally, the PTO shaft derives its power from the gearbox.
There are two standard PTO speeds: 540 rpm and 1000 rpm. This standardization was introduced to ensure that implements are designed to operate efficiently at these speeds. For splines, the 540 rpm shaft has 6 splines, while the 1000 rpm shaft features 21 splines.
THE INVENTION OF PTO IN THE TRACTOR INDUSTRY
In 1918, the International Harvester Company (IHC) introduced the Power Take Off (PTO) in tractors, with Edward A. Johnston, an IHC engineer, being the first to develop the concept after being inspired by homemade PTO systems in France. The 8-16 model became the first commercial tractor to feature PTO. Two

10.8.1. Function

A power take-off (PTO) is a splined drive shaft on a tractor that can be used to provide power to an attachment or a stand alone machine. PTO shaft gets the drive from hydraulic pump shaft. This in turn gets drive from engine. PTO is designed to be easily connected and disconnected (Fig 10.8.1.). It is used to operate implements, viz., rotavator, fertilizer spreader, duster and many more machines which are stationary such as threshers, water pump and portable flour mill. These shafts either run at 540 rpm with 6 splines in the shaft or at 1000 rpm with 21 splines in the shaft. But many old tractors have 540 rpm PTO. The present day equipment is designed to operate with 1000 rpm PTO shaft. The manufacturers of old tractor models provide an auxiliary gear box which increases the speed of PTO to 1000 rpm. Selection of implements, equipment and machinery should be done on the basis of available tractor PTO speed.

Power transmission through belts, pullies, gears, speed and size

Both stationary and portable types of agricultural machines make use of various types of power transmitting devices for doing useful work.

Some of these power transmitting devices are meant to convert rotary motion into linear motion or oscillating motion.

This transmission of power from generating unit to useful unit is possible through belts, pullies, gears, cams and couplings are also employed to transmit power. eg. The self propelled combine is a machine which employs most of the above power transmitting devices.

In some machines the belt drive is used to transmit power between two parallel shafts placed a short distance apart. In others a sprocket and chain drive is preferred, when the two parallel shafts to be operated

Q. 1 In which of the following tractor components, the speed reduction takes place? 
(A) Gear box        (B) Differential
(C) Final drive       (D) All of the above

Mechanical power is usually transmitted from one shaft to another by using belts, ropes, chains, gears and clutches.

1. Belts and ropes are utilized if distance between the shafts is large. Belts and ropes are flexible and bend easily. But slip occurs between the belt and the pulley.

INTRODUCTION
Transmission is a mechanism designed to reduce speed, consisting of multiple gears. It functions as a series of gears and shafts that transmit engine power to the tractor wheels. This system includes various components that enable both forward and reverse movement of the tractor, adapting to different field conditions. The entire route through which power flows from the engine to the wheels is referred to as the power train.
FUNCTIONS OF THE POWER TRANSMISSION SYSTEM
1. To transfer power from the engine to the tractor’s rear wheels.
2. To provide reduced speeds to the rear wheels as required.
3. To adjust the ratio between wheel speed and engine speed to match varying field conditions.
4. To facilitate power transmission through a right-angle drive, as the crankshaft and rear axle are typically positioned at right angles to each other.
The power transmission system is composed of several components: clutch, transmission gears, differential, final drive, rear axle, and rear wheels. Together, these components ensure the effective transmission of power.