eChapters

INTRODUCTION

In the emerging global knowledge economy, a country’s ability to build and mobilize knowledge capital is equally important for sustainable development like the physical and financial capital (World Bank, 1997). The basic component of any country’s knowledge capital is its indigenous technical knowledge (ITK). ITK is the social capital of the local people, their main asset to invest in the struggle for survival, to produce food, to provide for shelter or to achieve control of their own lives. It is the unique, traditional, local knowledge existing within and developed around specific condition of men and women indigenous to a particular geographical area (Ghosh and Sahoo, 2011). It helps to increase the sustainability of development efforts because of its integration process with mutual learning and adaptation, which in turn contributes to the empowerment of local communities.

6.1. INTRODUCTION

The word hypothesis is made up of two words Hypo + thesis = Hypothesis. ‘Hypo’ means tentative or subject to the verification and ‘Thesis’ means statement about solution of a problem.

The world meaning of the term hypothesis is a tentative statement about the solution of the problem. Hypothesis offers a solution of the problem that is to be verified empirically and based on some rationale. Hypothesis is the composition of some variables which have some specific position or role of the variables i.e. to be verified empirically. It is a proposition about the factual and conceptual elements. Hypothesis is called a leap into the dark. It is a brilliant guess about the solution of a problem. A tentative generalization or theory formulated about the character of phenomena under observation are called hypothesis. It is a statement temporarily accepted as true in the light of what is known at the time about the phenomena. It is the basis for planning and action in the research for new truth.

Introduction

Seed technology improves seed genetics and physiology. Variety creation, release, seed production, processing, storage, and certification are included. (Feistritzer, 1975). Organic farming began in the early 20th century due to constantly changing farming practices. Over 50 million hectares of certified organic agriculture are in Australia. “That discipline of study having to do with seed production, maintenance, quality and preservation” is seed technology. Organic seeds are fully produced with organic matter practices made with proven organic function and natural seed production, including seeding plants, with a set of guidelines prohibiting the use of manufactured products or chemicals to be sold as such. They must be produced by an accredited institution by an authorized person government agency. Organic seed is created by a planted crop and organically raised at least one generation for annual crops and two generations for annual and perennial plants. Organic farming is sustainable and eco-friendly. Farming needs better norms and standards to achieve biological goals. It is usually cold and people need lots of vegetables but have few organic, clean supplies. Organic farming in India needs a certain space and high-yield vegetable crops in national marketplaces to produce high-quality products. Indian agriculture uses chemical fertilizers, which can be minimized. Experiments have shown that it works well in conjunction. Inorganic and biological fertilizers boost yields, soil quality, and productivity.

1.1. INTRODUCTION

Researchers interested in taking up research have initial difficultes in picking up a problem worth for investigation. At time they waste considérable amount of time in just thinking about the pros and cons of problems suggested by some ones or identified by himself/herself. It is basically due to misunderstanding about "what is research". Usual notion about research is that it must resuit in something spectacular or it must come up with a new discovery or theory. It must be pointed out that a study which brings forward new facts, or which demolishes or establishes a hypothesis or a theory or principal already in vogue, or which puts a variety of information in to order or system, or which prepares ground for further research is as valid as one which ends with a new discovery. The best research problem for researcher is one which arises from the researcher's own curiosity. The only thing is that researcher must know the tools which can handle the problems he proposed to take up. Before choosing for a problem for research one should as question to himself: is this problem really of interest to me?; Is it significant in the sense that it extends the frontiers of knowledge or fills an important gap in knowledge?; Can I handle this problem within the constraints of resources of money, time etc?; has this problem not been investigated by someone else? A good research proposai describes situation of problem, problem area, justification, methodology adopted for data collection, analysis, expected results and institution/ organisation that may use the outcome.

14.1 Principles of X-ray Diffraction

Any crystalline structure is characterized by a regular and systematic arrangement of atoms (or ions) in a three-dimensional array. Since crystals are composed of regularly spaced atoms or ions, each crystal contains planes of atoms or ions separated by a constant distance which is the characteristic of that crystalline species.

X-rays are essentially electrostatic and electromagnetic fields oscillating in planes perpendicular to each other and to the direction of propagation in periodic cycles. X-rays having wavelengths in the order of 10^-3 to 10¹ nm, are produced within a vacuum x-ray tube by bombardment of a metal anode with high-velocity electrons. High-velocity electrons transfer their energy to the electrons of metal anode causing their elevation to higher energy level (excited state). Excited electrons of metal atom soon come back to the vacant shell and each electron transfer from higher to lower energy state results release of a quantum of energy (x-ray photon) equivalent to the difference in energy between these two levels. The energy and the wavelength of emitted x-ray photons are finite and characteristic of the particular atoms of the metal anode used in x-ray tube. Usually, photons generated due to electron transfer from L-shell to K-shell are used for x-ray diffraction analysis.

Diffraction of x-ray involves scattering of x-rays by planes of atoms of the crystal separated by definite distance and reinforcement of scattered rays in definite direction away from the crystal. Reinforcement of scattered rays is quantitatively related to the distance of atomic planes in a crystal as defined by Bragg’s equation:

1. INTRODUCTION

Juices and pulps are produced from a wide variety of fruits and vegetables around the world, while some medicinal plants and herbs are also used for preparation of extract of beneficial bioactive compounds. These juices and extracts contain very high proportions (upto 75-90%) of water. Due to their seasonal nature, these products can not be produced round the year in various parts of the world. Preservation, storage, transportation and marketing of single strength juices, pulps and extracts is not at all economical due to the presence of large quantities of water. Under these circumstances, the technology of concentration offers many advantages.

In chemistry, concentration, as a state, may be defined as “the abundance of a constituent divided by the total volume of a mixture” and can be mathematically explained in four types i.e. mass concentration, volume concentration, molar concentration and number concentration. Generally, the term concentration can be applied to any mixture (solid or liquid) but most frequently it refers to the presence of solutes in solvents. Mass concentration is defined as mass/volume (m/V) of mixture and represented in kg/m³, volume concentration as volume of a constituent divided by the volume of all constituents of the mixture (v/V) and represented in m³/m³, molar concentration as moles of a constituent divided by the volume of all constituents of the mixture (n/V) and represented in mol/m³, while, number concentration is defined as the number of entities of a constituent in a mixture divided by the volume of the mixture (N/V) represented in 1/m³.

In food technology or fruit juice industry in particular, concentration refers to a process of separation of water (or any other solvent) from the solids of the pulp, juice, extract by making use of any of the three basic methods i.e. evaporation, freezing and membrane technology. Pulps, juices and extracts are the basic material used for preparation of various types of processed products. But due to their bulk and presence of large quantities of water they are difficult to store and transport. Concentration of juices, not only provides microbial stability, but also reduces the costs of packaging, transportation and storage by reducing the bulk of the material. Concentrated juice, contains far less water than normal, or “not-from-concentrate” forms of juice.

The increasing global emphasis on sustainable and environmentally friendly energy alternatives has placed biofuels at the forefront of green energy innovation. Derived from agricultural biomass and organic waste, biofuels represent a promising substitute for conventional fossil fuels, particularly in agrarian economies where such feedstocks are abundantly available. Agricultural biomass includes crop residues such as rice straw, wheat husk, corn stover, sugarcane bagasse, and oilseed cakes. Meanwhile, organic waste comprises food waste, animal manure, municipal solid waste, and industrial organic residues. Converting these materials into biofuels not only reduces landfill burden and environmental pollution but also cuts down greenhouse gas emissions and promotes the development of rural and circular economies. A variety of biofuels—including biogas, bioethanol, biodiesel, biohydrogen, and syngas—can be produced through two major conversion pathways:
• Biochemical conversion, which involves microbial and enzymatic processes such as fermentation and anaerobic digestion.
• Thermochemical conversion, which includes pyrolysis, gasification, and combustion processes to transform biomass into energy-dense fuels.
Types of Liquid Biofuels
The term biofuel commonly refers to liquid fuels produced from recently living plant material, unlike fossil fuels derived from ancient biomass. Among these, ethanol and biodiesel are the most prevalent forms:
• Ethanol: A type of alcohol produced through fermentation, usually from sugar- or starch-based crops like corn, sugarcane, or cassava. Ethanol is used either as a fuel substitute or blended with gasoline to reduce carbon emissions in vehicles.
• Biodiesel: Produced through the transesterification of oils extracted from plants and seeds (such as soybean, sunflower, or palm), biodiesel is a renewable fuel that can be used in standard diesel engines. It offers a biodegradable, less polluting alternative to petroleum-based diesel.

1. In every winters peach requires heavy pruning because:

a) It bears on current season’s growth

Ib) t bears on previous season’s growth only

c) It bears on two years’ old wood only

Id) t bears on spur

2. Mango wilt/decline is spread through:

a) Mealy bug

b) White grub

c) Beetle

d) Leaf hopper

Introduction

Water retention is an important soil hydraulic property that affects how soil operates in an ecosystem and how it is managed. Hydrology, agronomy, meteorology, ecology, environmental protection, and many other soil-related professions employ soil water retention data. Some soil survey programs measure water retention. A soil survey can estimate water retention from other soil properties. However, these measurements are problematic during project design and in large-scale implementations (Rawls et al., 1991; Wo sten et al., 2001) since agricultural land needs rise periodically. Agriculture is using dry land. Food self-sufficiency and becoming a world food barn by 2045 necessitate agricultural land expansion (Mulyani and Agus, 2017). Water concerns afflict farming in this agroecosystem (Syam et al., 1996; Mulyani and Agus, 2017). Because of soil composition, much water stays in the earth. Tang et al. (2022).

For plant growth, soil water retention variables indicate how well the soil holds water. The dirt provides most of the plant’s water. Water in root layer dirt pores is absorbed by plants. Thus, soil water retention is the key factor affecting plant development and productivity. Plants can take in the soil pores’ water between the field capacity and the point where they always wilt. Field capacity occurs when the matrix potential and gravitational potential match. The most significant component for plant growth is soil water (Tang et al., 2022, Deng et al., 2016, Su et al., 2020). The soil’s physical features determine plant water availability. The amount of water available depends on clay minerals, organic matter, absorbed cations, soil texture and structure, and water availability. Thus, to prevent plants from experiencing water or groundwater stress, soil physical attributes must be investigated to determine groundwater availability (Kirkham 2023). Infiltration is crucial to groundwater availability. The amount of water that can penetrate the soil depends on its physical features, such as soil texture, organic matter, bulk density, porosity, aggregate stability/stability, and water content. Thus, soil water availability depends on its physical qualities, particularly its ability to absorb and transfer water. The physical properties of saturated soil affect how water travels through it, which affects runoff and infiltration (Sauer and Logsdon 2002).

ABSTRACT

The exponential growth of population and rapid industrialization, urbanization, deforestation and improper landuse practices have led to depletion and pollution of surface and ground water resources in Tamilnadu, India. In addition, a recurrent monsoonal failure further aggravates the problem of water even for drinking water. Water plays vital role in our day to day life and other developmental activities in the area. Thus, the availability of surface and sub surface water potential governs the processes of planning and development. The surface water resources are inadequate to fill the water demand and productivity through ground water is quite high as compared to surface water. Keeping this in view, the present study is aimed to identify the potential location of potable groundwater exploration in hard rock terrain. Thematic information on geomorphic landforms, Landuse/landcover and lineament details are extracted from remotely sensed data. Geology, Soil class, Drainage network and Slope map of the terrain were prepared using existing maps and collateral data by conventional method. GIS based model was developed and appropriate rank and weightage had been assigned to all categories based on local conditions/variations in each layer according to relative contribution towards the desired output. Since the present study built with logical condition and reasoning rule based approach for groundwater targeting, it has been successfully used and clearly demonstrated the capability of Remote Sensing and GIS techniques in identification of potable ground water potential zones.

Mites are small arthropods which attack number of crops damaging different parts of the plants (leaves, buds, flowers and fruits) and due to short duration of life cycle and high fecundity, their population increases at a fast rate and when feeding in large numbers they become serious pest of many crops. Since last few years the menace of mites is on the increase in Indian sub-continent causing enormous losses. One of the probable reasons for it is attributed to excessive use of broad-spectrum pesticides, which have led to the development of resistance in mites. Further, owing to their deleterious effect on non target organisms, especially natural enemies of the mites in the ecosystem there is often a spurt in the population of mites which otherwise may be of minor pest category. Because of their small size, the infestation goes unnoticed in the beginning and by the time prominent symptoms appear a lot of damage has already been done.

FRUIT CROPS

In fruit crops, being perennial in nature, the infestation of mites not only affects the trees at a particular time but their overall vigour gets reduced which is reflected in reduction in production as well as poor quality of the fruit in the years to come. The identification characters, nature of damage and the symptoms must be well understood in order to manage the mite pests effectively. A number of mites are associated with various fruit crops and those infesting major fruit crops are discussed herewith.

Historically, the terms alternative, complementary or traditional medicine (TM) all referred to a genre of health care practices or services that got bound together as a class through the logic of reductio-ad-absurdum, or because of their “absence from the mainframe of” what has come to be known as Modern Medicine (MM). However, since Stephen Fulder¹ , the identities of TM have become more distinct, MM-TM blending more active and, the line separating the two more fuzzy. To date, the World Health Organization offers the most comprehensive definition of TM² .

WHO defines traditional medicine as including diverse health practices, approaches, knowledge and beliefs incorporating plant, animal, and/or mineral based medicines, spiritual therapies, manual techniques and exercises applied singularly or in combination to maintain well-being, as well as to treat, diagnose or prevent illness.

The phraseology MM/TM is syntactically incorrect because it is contended that medicine as such, modern or otherwise, evolves and progresses through traditions. The major difference between the various traditions of health care practices is that MM rode the crest of the high wave of reductionist-scientistic rigor of modernity³ to reach the shore of global acceptability while the others never crossed the threshold of geographical and cultural locality, remaining untested, neither proved nor disproved. Darwinian principle of survival of the fittest also endorses a truism that survival is a proof of fitness. Given this principle, it makes sense that TM as we know of it today may be useful for promoting human health. Moreover, most TM considers human beings and their health in the context of their environment. This criteria, not only defines TM apart from MM but also provides for a reason as to why lately TM is emerging out of long hibernation. Developmentally, MM isolated “human” from its global environmental context as a static, stand-alone, complete, total and delimited system in itself. While this reductionist approach has a very high pay off for the first 90% of human health problems, it fails when dynamic non-linear complex systems elements kick in (I’m not exactly sure that you mean by this phrase). TM covers some parts of those hidden variables and thats the utility to modern mankind.

Introduction
Aquaculture, the controlled cultivation of aquatic organisms, has grown into a critical industry for global food security, economic development, and environmental sustainability. As the demand for seafood continues to rise, innovative technologies are revolutionizing aquaculture, making it more efficient, sustainable, and resilient to environmental challenges (Bostock et al., 2010). This chapter explores cutting-edge advancements in aquaculture technology, focusing on automation, precision farming, biotechnology, and digital monitoring systems.
Automation and Robotics in Aquaculture
Automation is transforming aquaculture operations by improving efficiency and reducing labour costs. Automated feeding systems, underwater drones, and robotic net cleaners are among the latest innovations enhancing fish farming productivity.
Automated Feeding Systems
Automated feeding systems have significantly improved the efficiency and sustainability of aquaculture operations by ensuring precise feed distribution, reducing waste, and enhancing fish growth rates (Fig. 1). These systems integrate advanced technologies such as artificial intelligence (AI), machine learning, and smart sensors to optimize feeding schedules and feed amounts based on fish behaviour, water quality, and environmental conditions.

Introduction

Fermentation is one of the oldest food preservation techniques that can be traced back thousands of years. Fermentation is referred as one of method of biopreservation as it leads to extending the shelf life of foods that involve the use of microorganisms and their metabolites. (Ross et al., 2002) For millennia, the fermentation of food by using micro organisms has been used as a technique for ensuring shelf life extension and improving the quality characteristics, texture and flavour of food products as well as to develop new innovative products. The major bacteria used in food fermentation worldwide are lactic acid bacteria (LAB). LAB is a multitude of genera including Lactobacillus, Lactococcus, Streptococcus, Leuconostoc, Pediococcus, and Enterococcus. Lactic acid bacteria constitutes a diverse group of bacteria that enjoys the status of “generally regarded as safe” (GRAS) and “qualified presumption of safety” (QPS) by the Food and Drug Administration (FDA) and European Food Safety Authority (EFSA), respectively. In this respect, starter microorganisms are known to produce a wide array of antimicrobial and protein-acoustic compounds to inhibit the growth of undesirable flora in foodstuffs resulting in shelf life extension. (Hill et al., 2017).

1. Introduction

Antheraea assamensis is lepidopteron insects of Assam which is commercially utilized for the heritage golden silk “muga”. Rearing of muga silkworm is one of the most significant traditional handloom industries restricted only to the North Eastern Region of India (N.E. India) and plays a major role in the rural economy.  Considering the ecological conditions, food plant distribution, presence of eco-types and species of diverse nature in co-existence, it is speculated that this region is a possible home of origin of Antharaea, from where radiations would have occurred (Neog et. al., 2010). Despite the fact that N.E. India is the original home of muga, earlier studies have shown that the population is declining due to depletion in genetic variability (www.cdfd.org.in/wildsilkbase/info_moths.php).

Key Facts
    
•    The United Nations Framework Convention on Climate Change (UNFCCC) defines ‘climate change’ as a ‘Change of climate which is attributed directly or indirectly to human activity that alters the composition of the global atmosphere and which is in addition to natural climate variability observed over comparable time periods’.
    
•    The main green house gases (GHG) that have caused the global climate change or global warming are carbon dioxide (CO₂), methane (CH₄) and nitrous oxide (NO₂).
    
•    CO₂ is the principal anthropogenic greenhouse gas that affects the Earths radiative balance. It is the reference gas against which other GHGs are measured and therefore has a Global Warming Potential (GWP) of 1. CH₄ and N₂O have a GWP of 21 and 310 respectively.
    
•    CO₂ is responsible for most of the enhanced green house effect of more than 50%, CH4 about 10 to 15% and NO2 about 4%.
    
•    The global atmospheric concentrations of carbon-dioxide, methane and nitrous oxide have increased since 1750, CO₂ increased from a pre-industrial value of 280 ppm to 379 ppm in 2005, CH₄ increased from 715 ppb to 1774 ppb and NO₂ increased from 270 ppb to 319 ppb in 2005.

18.1 Determination of Electrical Conductivity of Soil Solution

The conductivity or more precisely the specific conductance of a soil at a given soil-water ratio is the reciprocal of the specific resistance offered by the solution at 25ºC between the electrodes of 1 sq cm cross section kept 1 cm apart. Thus, the electrical conductivity of any solution depends on the amount of soluble salt present in it. Knowledge on the extent of salinity is important for management of saline soil including the choice of the crop suitable for that soil. Soluble salt content in saturation extract is more reliable index of salinity level than in soil: water ratio of 1: 2 or 1: 2.5, because it simulates the extent of salinity experienced by crop in field moisture condition.

Salinity class of soil is based on the electrical conductivity (EC) of saturation extract at 25ºC. However, EC of water extract from 1:2 soil-water suspension can be transformed into the EC of saturation extract following the formula (except for soil containing gypsum).

Abstract

Grazing animals have developed symbiotic relationship with anaerobic microorganisms, which survive in their rumen and help in the oxidation of complex molecules of feed containing lignocellulosic materials into volatile fatty acids. The consortium comprises anaerobic bacteria, fungi and protozoans. The rich microbial diversity of rumen remains constant after its establishment and does not get affected by intruding contaminants along with feed or water. The rumen contains a wide range of microbes such as Fibrobacter spp., Ruminococcus spp., Clostridium spp., Prevotella spp., Eubacterium spp., Methanobacterium spp., Treponema sp. Lachnospira sp., Bacterioides s pp., fungi: Anaeromyces s pp., Neocallimastix spp., and protozoa: Enoplastron sp., Eudiplodinium spp., Ostracodinium sp. They often have a variety of enzymes, glucanases, xylanase, glucuronidase, pectinase and amylase, etc. These enzymes inhabit the microbes and even break down complex molecules into simpler forms like; glucose and volatile fatty acids. The present chapter discusses on the role of microorganisms of rumen.

ABSTRACT

Nanomaterials will potentially play an important role in water quality. Production and applications of nanomaterials in industry are increasing. Furthermore, there are a handsome number of marketed nanomaterial-based consumer products. Therefore, how nanomaterials diagnose and function and how they perturb normal biological systems all become a top concern. In recent years, researchers are actively engaged in such investigations and discussions. At the same time, technologies and methods are developed to make more targeting nanoparticles for use in water.

Key words: Nanomaterial, Applications,Water quality

Weed is a plant that is growing in the wrong place. Weeds have many mechanisms and characteristics that enable them to compete, having thick waxy cuticle leaves that can be resistant to some chemicals, fast reproduction methods, the ability to reseed in 6 week cycles and deep tap roots enabling the weed to survive in compacted dry ground conditions.

There are many reasons to control weeds in annuals/biennial and perennial ornamentals. Weeds compete with the plants by absorbing essential nutrients and water, or by blocking light or air circulation. Weeds dramatic reduce the growth of the plants. The greatest damage is often done when the weeds and ornamental plants are small. Weeds also interfere with harvesting by physically hindering. They lower flower quality further by harbouring insects, such as whiteflies, thrips mites, slugs, snails and/or diseases.

Growing under optimal conditions for the flower will reduce the ability of weeds to compete against the crop. Controlling humidity/ventilation, water, light, pH, nutrients and temperature all figure prominently in providing flower optimal conditions. A plant health strategy to greenhouse weed control contains three principal elements, prevention/sanitation, evaluation of water quality and using all controls available physical, cultural and chemical. Prevention and sanitation can include the use of mulches in orchidhouse weed control. Rice hulls, perlite, pumice, corn gluten meal bark, Penn Mulch - pelletized recycled paper and human hair have all been used for this purpose. Prevention also includes, eliminating air borne weed seeds from entering the greenhouse by screening vents and other openings and preventing perennial weeds from growing under foundations. A 1-3 meter weed free zone should be maintained immediately adjacent to the greenhouse.