eChapters

Introduction

Earthquakes are the most destructive among all the natural hazards. Most of the time, they occur without any warning, which makes them most feared and unpredictable natural phenomena. Globally, on an average two earthquakes of magnitude 8 are known to occur every year. Some of the countries like Japan, China and United States have suffered several damaging earthquakes in the past. India has also experienced a number of high intensity earthquakes in the recent past and more than 650 earthquakes of magnitude >5.0 have been reported in India since 1890. Sixty-nine earthquakes in Delaware (U.S.A.) have been documented or suspected since 1871. Refer to Baxter (2000) for more details about the DGS Seismic Network and for documentation of earthquakes. In the 1930s Charles Richter developed a magnitude scale (Richter scale) which was an objective way of discriminating between large and small shocks using the seismic wave amplitude recorded by seismographs (Richter, 1958).

Introduction

A disaster is the result of an immediate situation or the result of a long, set process, which disrupts normal human life in its established social, traditional and economic system. This is due to the destruction of environment which is caused by extraordinary natural destructive phenomena or human-induced hazards resulting in human hardship and suffering beyond recovery unless external aid is brought in.

Introduction

Disasters are the natural and man made extreme events which exceeds the tolerable magnitude of any event, where adjustment is difficult. These events are catastrophic and results in the loss of life and property on a huge scale. These abnormal events form the headlines to the newspapers and media a world and national level.

These processes are beneficial to the human beings because they form the earth and habitable planet for the evolution of life. However, these processes within a short time limit forms, hazardous and such activities adversely affect the human beings and human related activities on a very large scale.

Amongst the three important types of disasters viz. natural, anthropogenic and technological, the first and the foremost natural disaster mainly includes the geological atmospheric and other related natural types viz. floods, earthquakes, cyclones, tsunamis etc.

Introduction

Natural Disasters are inevitable, and Indian subcontinent is prone to all type of Natural Disaster either it is flood, drought, cyclone, earthquakes, tsunami or forest fires etc. Disasters can be classified in several ways. A possible sub-division of disaster is: (i) Natural Disasters; (ii) Human made disasters; (iii) Human induced disasters. Another sub-division is related to the main controlling factors leading to a disaster. These may be meteorological, geomorphological/geological, ecological, technological, global environmental and extra terrestrial. Another useful distinction that can be made between disasters is regarding their duration of impact and the time of forewarning. Some disaster strikes within a short period with devastating outcomes; others have a slow onset period with equally or more serious repercussions. According to the available statistics 60% of the total area of Indian subcontinent is venerable to seismic activity of varying intensities, 16% of the country’s total area is drought prone. In India 68% of total sown area of the country is drought prone. Coastal areas of India is exposed to tropical cyclones, tsunami in recent years and among all the disaster occur in the country, River floods are the most frequent and often the most devastating.

Introduction

Disaster is defined as a serious disruption of the functioning of a community or a society causing widespread human, material, economic or environmental losses, which exceed the ability of the affected community or society to cope using its own resources (ISDR 2002).

Disaster in Global context - The impact of natural disasters in terms of human and economic losses has risen in recent years, society in general has become more vulnerable to natural disasters. Those usually most affected by natural and other disasters are the poor and socially disadvantaged groups in developing countries as they are least equipped to cope with them (IFRC 2001).

Introduction

The natural hazards like floods, cyclones, droughts, landslides and earthquakes are not rare or unusual phenomenon. India is among the world’s most disaster prone areas and a large part of the country is exposed to such natural hazards, which often turn into disasters causing significant disruption of socio-economic life of communities leading to loss of life and property. It would not be considered as a disaster unless it resulted in actual damage to human life or property. According to data accumulated over past 25 years, natural disasters in Asia accounts for about 40% of the world’s total disasters while the death toll ratio is about 50% and the number of people affected is about 90%. The latter figure is about 2.2 times the ratio of number of occurrences in Asia. The figures vary widely over the decades, a result that can be attributed to a few particularly terrible disasters. Such as the 1976 Tangshan Earthquake in China, which killed about 250,000, and a series of severe cyclones that hit Bangladesh in 1970 with a death toll of about 500,000. The death toll resulting from wind and flood disasters jumped by an order of magnitude in the 1990s. But this sudden increase affected Asia’s ratio to the world total by about 15 percentage points because there was a worldwide surge in this type of disaster. Clearly, there is an extreme concentration of victims of such disasters in Asia, Another substantial increase is clear in the value of damage caused by typhoons and cyclones; it is now running at 10 times the level of the 1980s. Again, however, the ratio has remained almost unchanged, at about 40%, because hurricanes in Central and North America account for more than 50% of the world total (51.2%, 58.5%, and 54.4% in the 1970s, 1980s, and 1990s,respectively). It is sadly worth noting that there has been conspicuous growth in the absolute value of damage in both Asia and the Americas.

Since the last decade discussion regarding ecology is being heard. A campaign with a great planning has launched by holding seminar conferences and meets. The ecological problem became a matter of tremendous panic and anxiety. Not only in India but also in entire world this problem is being discussed through all school, colleges and universities on international scale all over world, since it became universal issue now a days. The word ecology was not known to the people 20 years ago, never the less it became familiar even among the villages today. The people in villages are making thorough study of the subject. The experts of ecology from all over the world have been surprised to learn the exhaustive study of the same done by the Indian scholars. We have instituted a separate ministry to look after the environmental problems. The activities injurious to environment are prohibited. An act is there to restrict antienvironmental deeds what made scientists all over the world to take this matter so seriously. Does it mean that the very existence of mankind has been jeopardized by it Let us see what our ancient literature say about the ecology and pollution.

Industrial revolution took place in England during the period of 1760-1830. Accordingly, the production prior to demand was introduced. Many countries all over the world adopted industrial policies favouring industrial sector to achieve the fast development of the nation. Government of India also contributed its efforts in the same direction and issued the industrial policy of 1948, 1956, 1977 and so on making several financial and non financial facilities available to have substantial growth and development of industries in particular and nation in general.

Under the name of globalization and making the economy internationally competent, India took a revolutionary decision to follow new industrial policy 1991 opening the doors for investment from foreign countries and private sector even. In addition to this economic reforms have been adopted and advocated for the sake of national development. Three ‘D’ programme consisting of devaluation, decontrol and disinvestment, were also put on the national agenda, to achieve the set targets.

Introduction

The tropical evergreen forests of the Sahyadris or the Malnad region of Karnataka is one of the richest plant areas (“hot spots”) on earth and crucial to the oxygen supply of the world. More than 30,000 varieties of wildlife and plants and over 8,000 said to unique are reported to lie here. Unless reckless deforestation is halted soon, some scientists fear that within the next 100 years this virgin forest could become an arid wilderness.

Agriculture is one of the major age-old occupations of human beings providing food to the people and also supplies raw materials to a number of agro based industries. However the expansion of agricultural fields in the dense woody forest areas has brought about many environmental problems and thereby degraded the quality of environment in ecologically most sensitive areas like Uttar Kannada District. In India, agricultural practices are primarily based on the traditional system of intensive subsistence forming. It is also observed that more and more available area (forest) has been brought under cultivations to feed the population which has been growing at an alarming rate. The agricultural expansion and population growth, in forest areas of Uttar Kannada Districts have degraded the quality of environment.

Introduction

Reservoirs constitute the prime inland fishery resource in the country by virtue of their numerous production potential. These man-made ecosystems offer enough scope for stock manipulation through ecological maneuvering, paving the way for production hikes at a relatively low-capital investment. Unlike the aquaculture systems, where the development is capital intensive, a reservoir fishery development is labour productive and ensures employment for some of the weakest sections of our society.

Introduction

Lonar Lake, near Lonar town in the Buldhana District, India is not just the source of excitement for the visitors but also for the scientist community. Lonar is the third largest natural salt-water lake in the world, with a diameter of 1800 meter. Fredrickson, et al (1973) found that, about 50000 year back a massive meteor entered into the Earth’s gravitational forces ranging 60 meter long and weighing 2 million ton. It was racing at a speed of 25 kms per second towards the planet earth. When it struck the earth the energy released was equivalent to that released by six-megaton atom bombs. The impact was so severe that rocks from all sides came on the surface and reached the height of 20 meters. This impact left a massive crater 170 meters deep and with 1800 meter in diameter. Today it is natural salt-water lake.

Introduction

It has been observed that the surface waters are getting polluted due to improper disposal of domestic and industrial wastewaters. Most of the River basins which are major supply of water for human activities are polluted. Even the groundwater in not spared because of the incessant growth of the population in India. In Maharashtra the number of bore wells has been increased to 5 Lakhs from 1 Lakhs from few decades only. Out of total area of Maharashtra, 82% is covered by the basaltic rocks made up of lava. That’s why the quantity of the groundwater is comparatively less than the Indo-gangetic plane.

Groundwater in the north region of the Tapi River is found to be hard, unfit for the human consumption. The residences of district like Buldhana, Jalgaon and Dhule have to use hard water for consumption. Rampant extraction of the groundwater for agriculture might have caused alternation in chemical qualities of the groundwater. It has been also well documented that in Marathwada region, groundwater content higher concentration of fluoride and total Hardness.

Fluorine the most electro-negative element is of great interest and importance to human health because of its curative and harmful effects. Fluorides are released by various natural sources and anthropogenic activities into the aquatic environment (that is surface as well as groundwater). Fluoride can enter the human body through drinking water, food, toothpaste, mouth rinses and other dental products, drugs and fluoride containing salts and hydrofluoric acid. It may cause Fluorosis – a crippling and painful disease such as dental fluorosis, skeletal fluorosis and non-skeletal fluorosis.

Introduction

In addition to role of iron oxidation in commercial point of view there are certain implication of iron oxidation on environment. Acid Rock Drainage (ARD) is one of the example of environmental pollution. Coal and various metal ores are enclosed in geological formation of reduced nature. Coal, is often associated with pyrite (FeS₂).When mining activities expose this material to atmospheric oxygen, a combination of auto oxidation and microbial iron and sulfur oxidation produces large amounts of acids. The iron-rich acidic mine drainage kills aquatic life and renders the contaminated stream unsuitable as a water supply or for recreational use.

Introduction

In India there are about 200 distillery having installed capacity 1555.5 million liters per annum out of which 50% are of 30 KL/ per day capacity about 50% of remaining distillery are of 45 to 60 KL/ per day capacity there are few distilleries which having go 120 KL/ per day capacity. Distillery waste is one of the major industrial waste having high organic and inorganic constituents in the recent past the treatment and disposal of distillery waste has become a subject of debate of each and every forum.

Introduction

India is having very rich sources of inland water bodies in the form of river, lakes and reservoirs. The reservoirs are constructed by impounding the river system. The reservoirs are constructed for effective utilisation of water for irrigation, power generation and flood control. Reservoir fishery in India is also important from socio-economic point of view as it has the potential of providing employment to about two million people, Kaushal and Sharma (2001). Total area under the reservoirs in India is 3:1 million ha and it is expected to double by 2020. This includes 19,000 small reservoirs with a total water surface area of 14,85,557 ha and about 180 medium and 56 large reservoirs of 5,27,541 and 11,40, 268 ha area respectively.

The Maharashtra is endowed with an area of 1,79,430 ha under reservoir and the Maharashtra produces 516 tonnes of fish through reservoirs. The state fisheries corporation was operating in 6,272 ha of reservoirs and marketing the catches.

Introduction

Water is one of the most complex natural resources demanding a comprehensive understanding of its inherent features in occurrence and distribution for an integrated planning aimed at optimum development for agriculture, health, industry, power, etc. The well being and development of our society is dependent on the availability of water. An increase in groundwater development and utilization for industries and urban water supply has created improper disposal of liquid waste. Defective well constructions, sewage and waste disposal in man made lakes within city, open quarries with water and failure to seal the abandoned wells in city area have provided possible openings for downward movement of polluted water into subsurface formations without undergoing the process of natural filtration.

Introduction

Water is among the most precious gifts of nature to mankind. Most of the ancient towns of the world grew on the banks of the river, and some of the ancient civilizations are known by the names of rivers. Rivers have always been important sources of drinking water and the means of sustaining human, animal and plant life. Whenever one is dealing with water resources development and utilization, it has to be kept in mind that not only quantity of water but also quality of water is very important. The well being and development of our society is dependent on the availability of water. An increase in groundwater development and utilization for industries and urban water supply has created improper disposal of liquid waste. Defective well constructions, sewage and waste disposal in man made lakes with in the city, open quarries with water and failure to seal the abandoned wells in city area have provided possible openings for downward movement of polluted water into subsurface formations without undergoing the process of natural filtration.

Introduction

Environmental problems have come to the forefront as one of the most important issues in transport policy. For a number of pollutants the road transport sector is one of the most significant contributors to environmental pollution. Vehicular emissions have been identified as one of the major contributors in deteriorating air quality in the urban centers. The problem has further been compounded by the concentration of large number of vehicles and comparatively high motor vehicle/population ratios in these cities. Substantial SPM, RSPM CO₂ and No_x are emitted. The problem of air pollution has assumed serious proportion in some of the major metropolitan cities of India. Therefore, CPCB has 296 monitoring stations all over India covering major cities.

The air pollution situation in most of the cities is still far from satisfactory. In India the major air pollution reason is automotive smoke and smoke from industries. New channels are also publishing pollution levels in selected metropolitan cities. The most polluted city in Asia is Pune. The SPM and RSPM levels are displayed at various squares to create awareness among the masses.

Smaller cities like Nanded, Parbhani and Yavatmal are not covered under National Ambient Air Quality Monitoring (NAAQM) scheme of Central Pollution Control Board (CPCB). The National Ambient Air Quality Standards for suspended particulate matters (SPM) are based on gravimetric measurement. Standards for Respirable suspended particulate matters (RSPM) are also based on gravimetric measurement. The development in terms of number of vehicles and building construction has also reached at the doors of these cities and towns. Nanded city having population of 5.5 lakhs has total number of Auto rickshaws more than 5,000. In the present study, Nanded city has been selected to check particulate matters and gaseous pollutants. Since, the city is one of the important Pilgrimage and commercial centre.

Introduction

Present work report the study on Jakekur dam situated 4 km. from Omerga

The degradation of dam has occurred not only due to influents inflow but also by sanitation, domestic sewage, agricultural waste, and other activities around the dam like washing cloths, cattle, vehicles, and dumping of solid waste. Apart from it a large number of heavy metals is contributed by corrosion of metal pipe, runoff water from surrounding area during rainy season discharge of decorative paints in water bodies.

Geographical and morphological features of Jakekur dam.

Catchments area : 2110 hector

Gross storage : 10.17 TM C

Full reservoir level : 10 meter.

Length of the dam : 21.25 km.

Height of the dam : 14.80 meter.

Introduction

A society constitutes of several social system and institution such as family, school, religion etc. Every activity of these social systems and institution affect our environment in some way of other. There are various factor bring changes in the society. They are biology, environment, psychology, culture, demography and technology. All these factors collectively contribute to the changes in our society.

Auguste Gomte the father of sociology - defined sociology as the science of society. Sociologist believes that one can study society and understand the laws of society by applying the tools of natural sciences. We need to understand the nature as environment, its nature of work and our interaction with it, to understand and improve the efficiency of working with the nature. The Global deterioration the humanity is facing today is unprecedented in the annals of human history. We are already facing grave, water crisis disasters of all kinds, food, energy and ethical crisis etc. The solution is not visible and may not be visible in near future too. Environmental pollution means contamination in water, air, and land due to the various human activities. Man exploits natural resources to earn more and more profits. Forest is being cut down, the land is spoiled, and the air is becoming fuel and water being polluted. So nature has lost its balance such a situation has leaded us to what can be called as Environmental crisis. The changing lifestyle of our society is one of the main reasons for this crisis.

But unplanned execution of work and excessive industrialization and many other human activities has brought us to an alarming stage. In the face to live a luxurious life style we have been destroying the natural ecological balance.

Introduction

The town Paithan is famous by it’s name Dakshin Kashi. Godavari river has pristine glory and great significance for Hindus.

Nath temple is situated on the bank of Godavari river. It is a holy place and that’s why it becomes a place of public gathering on Ekadashi, Aashadi Ekadashi, Poornima, Deepawali, Dasera etc. Every year during Chaitra lakhs of people gather.

But at the time of Sheshti, which occurs once in a year is a special event. Hence many fold increase of congregation compared to other melas. The particular small stretch of river near temple was highly polluted, due to mass bathing and other polluting activities. The warm weather shall alter the photosynthesis rates, biodegradation and affect BOD, DO, pH etc. Recent Nath Sheshti at Paithan during 20^th March to 22^nd March 2006, drew about one lakh of pilgrims and had a few special aspects of interests from an environmental point of view.

Considering all the above aspects, it was decided to assess the changes in quality of river Godavari during Nath Sheshti.

Introduction

Impact Assessment can be broadly defined as the prediction or estimation of the consequences of a current or proposed action (project, policy, technology). Emergence of EIA can be related to National Environmental Policy Act (NEPA) of 1969 in the USA. This act is now considered as model legislation for implementation all over the world. Today we have more than 100 countries that have adopted EIA legislation. EIA requirements of aid agencies and funding agencies are typically based on the principles included in the NEPA. In any project planning, along with the traditional technical (engineering) and economic considerations the NEPA requires environmental impact considerations. Environmental impact statements (EISs) are prepared as action forcing mechanism in NEPA that describe the environmental consequences of major actions which significantly affect the quality of human environment. Thus, the primary purpose of EIA is to encourage the environmental considerations in planning and decision making process. Finally, it is expected to arrive at actions which are more environmentally compatible.

The Tuppa area, which is located 10-12 km away from Nanded city, and covers an area of about 66 km² was blessed with good , quality of water before industrialisation in this area. With the advent of industries more and more people from this region started complaining about the bad taste & quality of drinking water from dug and bore wells. From 1997 to1999 there was continuous increase in the lateral extent of pollution, with deeper bore wells more contaminated than the dug wells (Kaplay, et al. 2004).

Metals are toxic and non biodegradable pollutants released into the environment through effluents from agriculture waste, mining, metal processing industries, pharmaceutical industries as well as domestic and natural activities. Metallic pollutants tend to persist indefinitely and eventually get accumulated in the ecosystem. Metals especially arsenic, copper, cadmium, chromium, lead, mercury, nickel, selenium and silver etc. possess a risk to living systems. Conventional processes applied to remediation of metallic pollutants are often restricted due to technical and economical constraints. Particularly when the metal contamination is at very low concentration the conventional methods become inefficient. In this situation application of bioremediation techniques is a technology of choice for environmental protection and clean up.

Introduction

In the last two decades global climate change has perceptible and marked impact on the monsoon pattern in India. Delayed and inadequate monsoon has become a recurrent feature and the country is in the grip of drought-flood cycles. Right from the beginning of large scale irrigation that brought green revolution and food self sufficiency to the country, there is a strong feeling that full potential of rivers of the country is not tapped (Table 1).

Introduction

Environmental Assessment is taken up in this exercise as a rapid assessment technique for determining the current status of the environment and identifying impact of critical activities on environmental parameters. EIA is a relatively new planning and decision-making tool first enshrined in the United States in the National Environmental Policy Act of 1969. It is a formal study process used to predict the environmental consequences of any development project. EIA thus ensures that the potential problems are foreseen and addressed at an early stage in project planning and design. Creation of Environmental Impact Assessment (EIA) system is vital to conform socio-economic development projects to environmental safety and thereby ensure sustainable economic development. In view of the fact that development is an ever-growing process, its impact on the environment is also ever increasing, leading to rapid deterioration in environmental conditions. As such Environmental Assessment provides a rational approach to sustainable development.

It also enables us in carrying out Environmental Cost-Benefit Analysis of projects at an initial stage. It is thus a precursor to detailed analysis of environmental impacts, which are taken up only if a need for the same is established.

Introduction

All models are but approximations of reality. When we approximate there is always room for uncertainty. The preference of a particular model over the other is the relative degree of uncertainty acceptable to the objective and budget of the study. With the advent of computers, hosts of modeling software promising a lot to the researcher have arrived on the horizon. It is not in the scope of the book to enumerate all the techniques of hydrogeological modeling. Physical modeling using sand tanks was the earliest attempted modeling technique, about 107 years ago. Most recent and significant modeling technique practiced by many in groundwater potential identification is Geographic Information System (GIS) based modeling. After a brief treatment of physical models, concepts of mathematical models and GIS modeling are elaborated. The modeling techniques have involved mathematics and or software specific instructions. Hence it is recommended that relevant text books for individual techniques be referred. This chapter deals more on modeling concepts.

Introduction

Fresh water, a renewable but not an infinite resource, is becoming increasingly scarce. The amount available for use to the world today is almost the same as it was 4500 years ago but global demand has been increasing exponentially. Since 1950, the renewable supply per person has fallen 58 percent as world population has swelled from 2.5 billion to 6 billion. Moreover, unlike oil and most other strategic resources, fresh water has no substitute in most of its uses. It is essential for growing food, manufacturing goods, and safeguarding human health.

According to a World Policy Forum report, the largest and most combustible imbalance between population and available water supplies will be in Asia, where crop production depends heavily on irrigation. Asia today has roughly 60 percent of the world’s people but only 36 percent of the world’s renewable fresh water. China, India, Iran, and Pakistan are among the countries where a significant share of the irrigated land is now jeopardized by groundwater depletion, scarce river water, a fertility-sapping buildup of salts in the soil, or some combination of these factors. Groundwater depletion alone places 10 to 20 percent of grain production in both China and India at risk.

Introduction

The need for water for human consumption and the industry keeps spiraling up in the cities in the wake of rural diaspora and urban sprawl. Groundwater is exploited at an unsustainable rate leading to depletion of aquifers. Worse still is the intrusion of salt water from adjoining coast into the aquifers leading to total wastage of remaining water.

Introduction

Wells are vertical shafts excavated or holes drilled in earth to the level of water table for extraction. Digging of wells is an age old practice. Shallow dug wells supported communities in the past. Well water is drawn to the ground manually or mechanically using variety of containers made of metal, leather, canvass and wood or a combination of them. Draught animals or electrical power are used to draw water for irrigation.

Water table (Fig.6.1) wells extend below the groundwater table and extract free water. Pumping water from these wells lowers the water level. The well first gains water from the water bearing material in its immediate proximity. Subsequently a cone of depression is formed in the immediate vicinity of the well. Water outside the cone of depression but with in the area of influence is diverted to replace the body of groundwater finding its way in to pumping well.

Introduction

Large scale exploitation of groundwater using modern deep well boring technology and powerful pumps is the order of the day in India and elsewhere. Increase in agriculture area and year around cultivation of water intensive crops, frequently failing monsoons (Fig.5.1) all have led to drying up of surface water and increased dependence on groundwater.

Thus, given the scenario of over exploitation of the available groundwater, it is essential that proper storage and management of available groundwater resources be identified.

Introduction

Normally, water is a liquid substance made of molecules containing one atom of oxygen and two atoms of hydrogen (H₂O). Pure water has no colour, no taste, no smell, turns to a solid at 0°C and a vapour at 100°C. Its density is 1 gram per cubic centimetre (1 g/cm₃), and it is an extremely good solvent.

An extraordinary property of water is its ability to dissolve other substances. There is hardly a substance known which has not been identified in solution in the earth's waters. Were it not for the solvent property of water, life could not exist because water transfers nutrients vital to life in animals and plants.

A drop of rain water falling through the air dissolves atmospheric gases. When rain reaches the earth, it affects the quality of the land, lakes and rivers.

Introduction

Groundwater investigation has a long history. In the past a waterman in the village would walk around the investigation area with a Y shaped wooden fork and identify the location for digging the wells. Certain trees and organic landforms like termite mounds were considered as indicators. The native intelligence of local topography should have played a role in identifying potential location. Successful or otherwise the method can be said to lack scientific objectivity. The optimal groundwater surveying method is no doubt drilling. This method ensures that all necessary information is being brought up from the geological formations. However, in order to obtain a desired degree of information from the subsurface of an area, drilling alone is normally not a feasible alternative.

There are a number of efficient and inexpensive geophysical surveying methods available to the hydrogeologist. It is worth noting at this point that these are, without exception, indirect methods. This implies that no method measures directly what we are actually looking for. With geophysical surveys, the target features are therefore invariably associated features. This implies that unless we understand the water context of these features, our geophysical surveys will be less than meaningful.

Objective methods of investigating groundwater are discussed in this chapter.

Introduction

The science of hydrogeology is defined as hydrology with emphasis on geology. This chapter is to refresh your geology knowledge. The key words are highlighted to assist a quick review.

The Crust and its Composition

The thin outermost layer of the earth is called the crust and ranges in thickness from about 8 km under the oceans to about 25 km on land. It extends under both oceans and continents, and forms the source for all the soils, vegetation, and gases in the atmosphere.

The crust is primarily composed of two elements: silicon and oxygen which account for 75% of the earth’s crust. Note that these are the two elements found in quartz (e.g., sand), which suggests this is the most common of all minerals.

Introduction

Water preceded all forms of life on earth and is believed to be the very origin of all organic life forms. For ages water was forming oceans, separating landmasses and shaping the terrain. It further influenced the emerging atmosphere of the young planet. The first organism formed and began to evolve in the primeval oceans. Mankind entered into the scene several million years later. The history is rather too long and infinitely complex. Variety of models with different degrees of certitude and consensus attempt to cogently explain what could have happened. But in spite of all the differences on the course of evolution, there is a universal consensus that water played a decisive role in the changes.

Across the globe, mankind managed to establish different civilizations with dissimilar cultural and material advancements much later. But then invariably all civilizations considered water holy and water bodies were sacred places. Holy wells, springs, rivers, cenotaphs were held in awe all through human history. The mysterious properties of water are studied from time immemorial. And water indeed is a strange compound! Availability of water for consumption and agriculture has determined the zenith and nadir of surviving and extinct civilizations.

Ancient Indian temples as part of design, have a prominent sacred well or a pond with an associated purana/myth narrating the mystical properties of the theertha / waterbody. It is still is a living tradition. In the west wishing wells survive from remote antiquity.

15.1 Section-A : Write True / False

Q.1 In bivariate distribution if the change in one variable afects a change in the other variable, the variables are said to be correlated.

Q.2 If the change in both the variables takes place in the same direction then the variables are said to have a positive or direct correlation.

Q.3 The pair of variables say, Income and expenditure in house hold or the height and weight of a group of children possess the direct correlation between them.

Q.4 If the change in both the variables takes place in oposite directions, then the variables are said to have "Negative or inverse" correlation.

Q.5 The pairs of variables say (i) Price and demand of a commodities or (ii) Volume and pressure of a perfect gas" have a negative correlation.

Q.6 The two variables are said to have a perfect positive correlation if the deviation in one variable is followed by a corresponding and proportionate deviation in the other variable.

Q.7 There are some funny combinations of variables between which the correlation are said to be "spurious or nonsense".

14.1 Section-A : Write True / False

Q.1 If sample size n is small ie n < 30, then the small sample test is applicable.

Q.2 The exact sample test (small sample test) can be applied to large sample test but the converse is not plaussible.

Q.3 If (x²1 , x²2 ) are two independent chi-square variates with (V1, V₂) degree of freedom then F statistic is def ned as

13.1 Section-A : Write True / False

Q.1 The square of a standard normal variate is known as Chi-square variate with one d.f.

Q.2 If X ~ N(μ, σ²) and Z = (x - μ)/σ then Z² is known as Chi-square variate with 1.d.f.

Q.3 If Xi ~ N(μi, σi), i = 1,2,...., n are n independent normal variates then

12.1 Section-A : Write True / False

Q.1 Almost all biological data e.g. crop yield, plant height, seed weight, seed size, protein content in pulse, oil content in oil seed etc. are assumed to be normaly distributed.

Q.2 Let X be a normal variable with N(μ, σ²). The random variable Z def ned as Z = (x - μ)/σ, is known as standard normal variable.

Q.3 The standard normal variable Z is denoted as Z ~ N (0, 1).

Q.4 The p.d.f. of random variable Z is given as

11.1 Section-A : Write True / False

Q.1 Some assumptions or guesses made about the unknown population parameters, is know as "Statistical hypothesis".

Q.2 For the normal distribution N(μ, σ²), the statement (1) μ = 25.0 and (ii) σ² = 37.0, are known as statistical hypotheses.

Q.3 Let p = 0.5 is the probability of getting a head in single throw of a coin. Ten, this statement is not a statistical hypothesis.

Q.4 The statistical hypothesis under consideration (under test), is known as "Null hypothesis".

Q.5 The null hypothesis is denoted by "Ho".

Section-A : Write True / False

10.1.1 Normal Distribution

Q.1 A r.v. X is said to have a normal distribution with parameters (μ, σ²) if its p.d.f. is given by the probability law

9.1 Section-A : Write True / False

Q.1 The probabilistic laws for dif erent values of a random variable are made on the basis of given conditions. T ese conditions are known as "prior considerations".

Q.2 If the probabilistic laws are made for dif erent values of a random variable on the basis of results obtained from an experiment, then such results are known as "a posterior inferences".9.1.1 Discrete Uniform Distribution

Q.3 A random variable X is said to have a discrete uniform distribution over the range [1, n] if its p.m.f is written as

Section-A : Write True / False

Q.1 The moment generating function (m.g.f) of a random variable X (about origin having the probability function f (x) is defned as

Section-A : Write True / False

Q.1 The average value of a random fenamenon is termed as “Mathematical Expectation” or “Expected value” of random fenamenon.

Q.2 The mathematical expression to compute the expected value of a discrete random variable X with its p.m.f. f(x) is def ned as

Section-A : Write True / False

Q.1 A random variable (r.v) is a real number x connected with the outcomes of a random experiment.

Q.2 In tossing of a balanced die at one time, the number coming on the upper most face of the die is a random variable x which takes any one out of 6 values taken as 1, 2, 3, 4, 5, 6.

Q.3 Let s be the sample space associated with a given random experiment. A real valued function defned on s and taking values in R (-∞,∞) is called one dimensional random variable.

Q.4 In general a n dimensional random variable is simply a function whose domain is S and whose range is a collection of n-tuples of real members (vectors in n-space).

Section-A : Write True / False

Q.1 If an experiment is repeated under an identical conditions, we generally come to a result (i.e. outcome) which is unique or certain.

Q.2 In an experiment, the result (outcome) may not be unique but it is one of the several possible outcomes.

Q.3 The phenomena described in Ql, are known as “deterministic or predictable”.

Q.4 In deterministic phenomena, the results can be predicted with certainity

Q.5 A deterministic model stipulates that the conditions under which an experiment is performed, determine the ouctome of the experiment

Q.6 The phenomena which do not lead themselves to deterministic approach, are known as “Unpredictable or probabilistic” phenomena.

Q.7 The phenomena frequently occured in business, economic and social science or even in our day to day life, are known as “deterministic phenomena”.

Q.8 A manufacturer can ascertain the future demand of his product with certainity.

Q.9 A sales manager can not predict with certainity about the sales target next year.

Section-A : Write True / False

Q.1 Dispersion of a given set of values, gives an idea about the homogeneity or heterogeneity of the distribution of values.

Q.2 The measure of scatteredness of a set of values about an average is known as the “measure of variation or dispersion”.

Q.3 The measure of dispersion must be based on all the observations.

Q.4 Measure of dispersion should be amenable to further mathematical treatment.

Q.5 Measure of dispersion should be affected as little as possible by fluctuation of sampling.

Q.6 The measures which express the spread of observations in terms of distance between the values of two selected observations, are known as “distance measures” e.g. range and interquartile range (or quartile deviation).

CONTRACEPTION DUE TO MISALLIANCE AND TERMINATION OF PREGNANCY IN BITCHES

It is obvious that breeders maintain varieties of breeds but mismating do occur within their own premises and sometimes by unwarranted stray animal.

Misalliance complicates too many other problems.

Incidence of mismating is 15 to 20 percent in canine breeding.

TRUE ANESTRUS IN A HEIFER OR POST PARTUM COW / BUFFALO

The animal has both ovaries small and inactive

No palpable structures in the ovaries

Animal does not exhibiting estrus signs

Accurate early diagnosis of pregnancy is essential for successful breeding programme.

Ability is required for successful practice.

Skill is to be developed to indicate the duration within weeks in early and months in late pregnancy.