eChapters

Background

Analysing changes in the cropping patterns is an important prerequisite for optimization and evaluation of water use efficiency and water resource management. Cropping pattern changes in India could not only be seen as resulting from the pursuit for higher economic returns, but also as a feedback response to limited water resources. Although a systematic framework is still needed for future cropping pattern planning in the country by taking food security, continued agricultural expansion and other constraints into consideration, the existing cropping pattern may provide an insight with which alternative cropping patter may be proposed for a right intervention in enhancing water productivity and food security.

Introduction

Global warming needs a shift to automobile solutions that reduces/ do not produce greenhouse gas emissions. Automobile related pollution is the major source for reduction in air quality in Indian cities. India need to reduce dependency on a fossil- fuel and reduced transportation related emissions. People living in some of the Indian cities are being affected by noise pollution and electric vehicles may contribute to a reduction in noise pollution levels in the cities. Energy efficiency and emissions are two important contributing factors in transportation across the globe.

Introduction

The issue of environmental protection has become increasingly important in recent years, and one of the most effective ways to address this problem is through the use of recycled products. Recycling helps to conserve natural resources, reduce waste, prevent pollution, and combat climate change making it a critical part of any sustainable development strategy. In this chapter, we can explore how recycled products can help protect the environment and the many benefits that come with their use.

Non-Neoplastic Conditions

Haematoma

Collection of blood in outside of the blood vessels It is more common in external ear

• Presence of erythrocytes, blood filled leococytes (non-degenerative neutrophils and macrophages) and platelets
  • Haemosiderin or haematoidin crystals will be seen

Epidermoid cyst/Epidermal cyst/Epidermal inclusion cysts/Follicular cyst

Cytologically cannot distinguish epidermoid cyst from dermoid cyst

• Constitutes ????V3 to V2 of non-neoplastic/non-inflammatory lesion
• Smear is thick
• Keratin bars, squames and other keratinocytes

2.1 Audio-Visual Aids Classification

Audio-visual aids are tools that combine auditory and visual stimuli to facilitate learning and improve comprehension. They can make abstract ideas more concrete and understandable. Here's a classification of some commonly used audio-visual aids:

• Audio Aids

• Tape recorders: are tools for teaching that playback sound or music.
• Radio: Programmes can serve as educational resources and audio learning aids.
• Podcasts are digital audio programs or episodes with a focus on learning.

The history of Patent law in India starts from 1911 when the Indian Patents and Designs Act, 1911 was enacted. The present Patents Act, 1970 came into force in the year 1972, amending and consolidating the existing law relating to Patents in India. The Patents Act, 1970 was again amended by the Patents (Amendment) Act, 2005, wherein product patent was extended to all fields of technology including food, drugs, chemicals and micro organisms. After the amendment, the provisions relating to Exclusive Marketing Rights (EMRs) have been repealed, and a provision for enabling grant of compulsory license has been introduced.

Introduction

The most significant part of the research report is analysis and data interpretation. This chapter presents the analysis of data gathered through the questionnaire designed for the study. The study's primary data was collected from 266 (two hundred and sixty-six) Library and Information Science (LIS) professionals working in the eight-state universities in Kerala. It includes a detailed analysis of major results and pertaining information for arriving at a valid conclusion. It helps to interpret the results of the study from the proper perspective. Based on the set forth objectives and hypotheses formulated, the data collected through questionnaires were tabulated, and statistical analyses have been done to formulate the result of the study.

Importance of Statistical Data

In the modern era economic and social life of the people and the functional system of industry and business, educational and medical facilities and other activities of the community have undergone substantial changes due to spectacular developments in the field of science and technology. Now the emphasis is on specialization in mass production and utilization of goods and services of a given type with a view to get the maximum possible benefit per unit of cost.

Introduction

Energy conservation is the practice of using less energy to lower costs and reduce environmental impact.

A majority percentage of energy used in buildings is still from non - renewable and fossil fuel resources. Lighting and Appliances are affecting energy demand in domestic sector.

Reasons for increased energy demand

• Increase in electrical appliance ownership

• Increasing income level and reliable access

• Rise of Lighting and appliance loads

Introduction

Eco-friendly interior design is an important consideration for anyone who wants to create a healthy, sustainable, and beautiful space.

Environmental impact: The materials used in interior design can have a significant impact on the environment. Eco-friendly materials are made from renewable resources, reduce waste, and often have a lower carbon footprint than traditional materials.

1. Introduction

Agriculture is the backbone of the economy and a significant sector. For all nations, agriculture digitization is a growing area of concern. The need for food rises in tandem with the world's population growth, which is happening quite quickly. The agriculture sector is finding it very challenging to develop methods and strategies that will enable them to completely meet the growing wants and specifications due to the expanding need for food and shifting consumer preferences. Misuse of agricultural components can have detrimental effects on the environment and cause pollution. Farmers mostly rely on irrigation canal networks, groundwater, and rainfall in the field of irrigation. 

Introduction

India possesses abundant human resources due to its demographic dividend. With a population of approximately 1.39 billion, rural areas are home to about 68.84% of the total population, constituting more than two-thirds (Census 2011, GoI). According to the National Sample Survey Office (NSSO) in 2019, about 58.3% of rural households rely on agricultural activities as their primary source of income. Despite the significant reliance on agriculture for livelihoods, the agricultural situation in India is challenging.

Agronomical practices is the collection of operations starts from field formation, tillage, sowing, irrigation, manure and fertilizer management, pest control and harvest etc. Though, the type of agronomical practices varies with the crop, the basic function of various agronomical operations remains the same for all the crops. Considering that, understanding the basics of general agronomical practices is crucial for good agricultural practices and optimum production.

Tillage

Tillage is the basic activity of preparing the land for the crop production.

Poultry is one of the most emerging growth components of Indian agriculture, with egg and meat production rising at the rate of 8-10% per year when compared to crop production (1.5 - 2% each year). In India, the poultry population stood at 851.81 million in the 20th livestock census, an increase of 16.8% over the 19th census. Poultry sectors contribute 1% of national GDP and 25% in livestock GDP (FAO, 2021). According to DAHD’s 2022 report, our nation produces 122.05 billion eggs and 4.47 million tonnes of poultry meat altogether. India ranks eighth in terms of total meat production and third in terms of total egg production (DAHD, 2022).

1. Alphabet Inc. (marketed as Alphabet) is the parent company of:

a) Google

b) Yahoo

c) Microsoft

d) Apple

2. Human Rights Day is celebrated annually across the world on ................. every year.

a) 10 October

b) 10 November

c) 10 December

d) 10 January

 

Departure of waves ( P,Q,R,S, T), segments (P-R, S-T and T-P) and /or intervals (P-R, Q-T, R-R) from their normal values (configuration, morphology, amplitude and duration of wave; prolonging /shortening of intervals : elevation /depression of segments from their isoelectric line) is said to be abnormal feature of the electrocardiogram. These abnormalities are suggestive of specific cardiac abnormalities such as a defect in the current generation, its conduction or both; or change in the size of the chambers (atria / ventricles/both.).

Though the treatment for arrhythmias has been recommended for even a single premature beat, in the current scenario the treatment is indicated when there are more than 17 VPCs per minute. In certain situations the side effects or proarrhythmic effects of drugs can lead to morbidity or mortality. As a result, new guidelines are proposed when evaluating the need for treatment of arrhythmias. Keeping the adverse effects of antiarrhythmic agents in mind, one should be selective about which arrhythmias are to be treated. The goal of antiarrhythmic therapy includes the treatment of an existing arrhythmia or prophylaxis for anticipated arrhythmias.

Introduction

The global aquaculture and fishery industry is a substantial business, valued at USD 281.5 billion, yielding an impressive 122.6 million tons of aquatic products in 2020 (FAO, 2022). Asia is the largest aquaculture producer, contributing to almost 91.6% of the world's total production (FAO, 2022). Forecasts indicate that aquatic animal production is poised to grow by an additional 14% by 2030 (FAO, 2022). Despite this growth, there remains a pressing need for technological advancements to address critical challenges like water pollution, disease outbreaks, the quality of breeding stock and juvenile fish, and inadequate management practices (Fearghal, 2019; Michael, 2019).

10.1. Black Tip

The black tip of grain infection is mostly observed on the wheat grains.

The fungal pathogen involved in causing the black tip of grain includes the species of the fungal genus Alternaria and Helminthosporium.

10.1.1. Alternaria

The genus stands distinct from other genera by its transversely and longitudinally septate (muriform) conidia. The conidia are usually formed in chains. These are dark brown, typically obclavate with a distinct oval body and beak.

12.1. Routine Media for Fungal Isolation

In recent years commercially available readymade culture media have been used in research laboratories for the isolation of fungal plant pathogens. These culture media are standardized and they are in different types. Some media are used for general purposes while some others are used for the isolation and growth of specific pathogens e.g.

• General considerations

 • Blood glucose

• Total serum protein

 • Serum albumin

 • Serum globulin

 • Serum gamma globulin

 • Serum calcium

 • Serum inorganic phosphorus

 • Serum magnesium

 • Serum cholesterol

 • Serum creatinine

 • Serum urea

 • Serum chloride

 • Serum sodium

 • Serum potassium

 • Serum Glutamic Oxaloacetic Transaminase

 • Serum Glutamic Pyruvic Transaminase

 • Serum alkaline phosphatase

• General considerations

 • Polyacrylamide gel electrophoresis (PAGE)

 • SDS-polyacrylamide gel electrophoresis (SDS PAGE)

• Nucleic acid hybridization

 • Radio labelled probes

 • Biotin labelled probes

 • DNA finger printing

 • Polymerase chain reaction (PCR)

 • Reverse transcriptase polymerase chain reaction (RT PCR)

Introduction

The emergence of the green revolution highlighted the significance of agricultural communication. Its strategy and attitude were modified to reflect the priorities of contemporary agriculture. Earlier attempts at agricultural journalism drew their power mostly from agricultural extension rather than journalism or mass communication. The primary objective was to provide farmers with a collection of techniques authored by scientists or subject matter experts about a variety of crops. Due to the lack of synergy between journalism and extension, agricultural journalism stalled for many years..

Solar heat plays a pivotal role in the functioning of greenhouses, serving as a primary energy source that influences the internal climate crucial for plant growth. The absorption of solar radiation by the greenhouse covering material initiates a complex process of heat transfer, involving conduction, convection, and radiation. This solar energy, once absorbed, contributes to elevating the temperature within the greenhouse, creating a favorable environment for plants. A fundamental understanding of solar heat dynamics is essential for optimizing greenhouse design and operational efficiency.

Greenhouses have become an essential part of modern agriculture as they offer controlled environments for plant growth, research, and horticultural practices. This chapter discusses the various applications of greenhouses, which include extending growing seasons, improving crop yields, supporting botanical research, and producing ornamental plants. Additionally, it emphasizes the importance of repair and maintenance in greenhouse operations. Understanding the repair and maintenance protocols is crucial to ensure the sustained functionality of heating systems, water management, and structural components.

Impact Assessment Approach-Quantitative, Qualitative Participatory and Mixed Methods with Their Advantages and Disadvantages

Quantitative research approach

 Qualitative research approach

 Participatory research approach

Mixed method research approach

Advantages of Quantitative Research

Introduction

From a scientific perspective, weeds are plants that grow in locations and times when we desire to cultivate other plants or no plants at all. Weeds are uninvited, rapidly spreading, competitive and environmentally detrimental vegetation that can be found in both cultivable and non-cultivable lands. Globally, approximately 30,000 plant species have been classified as weeds, out of which 18,000 pose significant threats to crop productivity, leading to substantial losses. Among the different factors causing crop productivity losses, weeds are a major biotic constraint and account for 33%.

Introduction

Farming has undergone significant changes since the Green Revolution in the late 1960s and economic liberalisation in the early 1990s. These changes have led to a shift in focus towards a few specific enterprises due to factors such as a decrease in farm size, fluctuating commodity prices, the need for livelihood diversification, and a shortage of labor. (Ponnusamy and Kousalya, 2017). The current scenario in the country indicates that the agricultural area under cultivation is decreasing and more than 20 percent of the current cultivable land will be converted into non-agricultural purposes by 2030 (Gill et al., 2005). 80 per cent of farm families belong to the small and marginal farmer categories. Hence India is putting more emphasis on agriculture in research as well as in technology transfer through many extension activities.

Introduction

Future agricultural production potential is in danger due to the existing cropping system, characterized by irresponsible chemical utilization, extensive tillage, monoculture, and soil health degradation. Consequently, a significant challenge for modern agriculture lies in ensuring adequate nourishment for the entire world’s population while also safeguarding the environment. The intensification of agricultural practices negatively impacts vital natural resources like soil, water, air, and biodiversity throughout various developmental stages. While the conventional cropping system have enhanced crop productivity, its consequences including land degradation, resource depletion, reduced organic matter insoil, draught, soil salinity, erosion, and climate change pose significant global threats (Tomar et al. 2014; Yadav et al. 2014; Mandal et al. 2020; Rani et al. 2021).

Introduction

`The living and nonliving components of ecosystems, as well as the conditions and processes that occur within them, create services thus connecting ecosystems and human cultures. The preservation of Earth’s biological diversity and the protection of the benefits, or “ecosystem services,” those functioning ecosystems bring to humanity are two primary goals of environmental conservation. Agroforestry is increasingly viewed as providing ecological services, environmental advantages, and economic gains as part of a multifunctional working landscape. The multifunctional importance of agroecosystems was emphasized in both the Millennium Ecosystem Assessment (MES 2005) and the International Assessment of Agricultural Science and Technology for Development (2008).

Introduction

In the ancient era, adulteration was practiced as economical fraud like the addition of water to milk and stone to grains and pulses but nowadays it has become a global concern due to adverse health effects of adulterants on a human being. Words like substitution and admixture can help define adulteration. In general, adulteration is defined as either removal of valuable constituents from food or intentionally/ unintentionally addition of substandard quality material to degrade food quality. Food adulteration not only negatively affects the quality of food products but also results in numerous adverse health effects along with significant economic problems (Cheng et al., 2015).

Introduction

The act of substituting food or drink with low grade quality ingredients thereby the f inal product will fail to the meet the regulation or standards and in most cases even unfit for human consumption (Augustin et al., 2009). With demand for profit based manufacturing market, there will be increase in points of adulteration with cheaper alternatives or inferior grade ingredients in the production of food or drink (Banti, 2020)]. Adulteration is highly prevails in developing countries such as India, where about 70% of milk supply is adulterated on day to day basis (Bittar et al., 2017). It is every nation and each individual’s responsibility to provide safe and nutritious food to the consumers.

Introduction

Spices are botanical products of tropical and subtropical plants, mainly fruits, seeds, f lowers, roots, stems, leaves, bark, or whole plant (Golob & Nations, 1999). The dominant spices of trade including cardamom, cinnamon, cloves, ginger and pepper (A. Osman et al., 2019)including aroma, flavor, and color, to foods and beverages in an effort to enhance their palatability. Herbs and spices exhibit a plethora of medicinal properties including antimicrobial and antioxidant properties. Spices serve as natural preservatives to delay food spoilage and extend shelf life.

Introduction

Food fraud is not new it can be traced back to ancient Rome and Athens, where regulations prohibiting the adulteration of beverages with flavours and colours were in place. It exists since the food trade has been started. Food fraud affects all food supply chains, thus the entire food sector. Due to globalisation and the increasing complexity of supply lines, food supply chains are becoming more vulnerable to food fraud (Robson et al., 2021a). A fraud is “any act or omission relating to the use or presentation of false, incorrect, or incomplete statements or documents, or non disclosure of information in violation of a specific obligation, and any other illegal activity affecting the financial interests” (EU No. 2017/1371).

Introduction

The term ‘multipurpose trees’ covers all woody perennials used in agroforestry. Many authors have given many definitions of MPTs and MPTS. Burley and von Carlowitz (1984) reviewed many definitions and gave a synthesised definition which states that “multipurpose trees and shrubs (MPTS) are those which are deliberately grown and kept and managed for preferably more than one intended use, usually economically and/or ecologically motivated major products and / or services in any multipurpose land use systems, especially agroforestry systems”. The Forestry /Fuelwood Research Development Project (1992) precisely defined ‘multipurpose trees’ (MPTs) to mean tree species that are grown to provide more than one significant crop or function on the farm.

Combination Fungicides

Composite or combination fungicides are made up of two or more active ingredients. The active ingredients of combination fungicides often come from two distinct chemical groups. Combination fungicide products offer an optimized combination of two or more active ingredients and the convenience of one product. Combination fungicides boost each treatment’s efficacy and extend its range of action. Combination products significantly lower pathogen populations by targeting numerous pathogens with a single treatment. Longer periods of control are achieved by further reducing pathogen populations with increased potency. Combinations of fungicides can decrease the selection of pathogen strains resistant to specific fungicides and restrict exposure to each active component.

Introduction

The food processing industry ranks fifth in size in the country and employs 16 lakh workers which is 19% of the country’s industrial labour. It accounts for 14% of the total industrial output with 18% of industrial GDP and 6.3% of countries GDP. So, food processing plays a vital role in India’s prosperity. The Food Processing Industry sector in India is one of the largest sector in terms of production, consumption, export and growth prospects. Food processing industry broadly comprises primary processing category and the other categories embracing the secondary, tertiary and further stages of downstream processing. Primary food processing is a major industry with lakhs of rice-mills/ hullers, flour mills, pulse mills and oil-seed mills. There are several thousands of bakeries, traditional food units and fruit/vegetable/spice processing units in the unorganized sector. In the organized sector, there are over 820 flour mills, 418 fish processing units, 6600 fruit/vegetable processing units and 171 meat processing units. Indian processing industries has installed capacity of 21 lakh tones; however these industries actually processed 9.8 lakh tones of the produce. So the total capacity utilization of industries is <30%. There are 70% units in home/cottage/ small scale sector and 30% units in large scale sector with capacity of 250 tonnes per annum and 30 tonnes/hr, respectively. Large scale contributes 70% of the production. The principal crops and commodities which constitute the primary base for the food processing industry and considered important sub-sectors in food processing industries are illustrated in Fig. 1.

Introduction

The health and wellness of human being is largely dictated by the consumption of nutritious foods. Understanding the role of foods in maintaining health and cure of diseases has its roots in the ancient Hippocratic and Vedic texts as well as in the canons of Traditional Chinese Medicine (Sharma et al., 2012). Presently, the transition from a traditional to modern lifestyle, consumption of diets rich in fat and calories combined with a high level of mental stress has been the major cause of lifestyle related diseases like coronary heart disease, obesity, diabetes, cancer and hypertension (Moczara et al., 2012; Sharma et al., 2018). Various studies have linked foods as helpful in combating a number of such degenerative diseases (Sharma, 2015).Therefore, the tenet "Let food be thy medicine and medicine be thy food", quoted by Hippocrates about 2,500 years ago is receiving overwhelming interest. There are number of scientific reports emphasizing the importance of consuming biologically active ingredients present in fruits, vegetables, whole grains and legumes to reduce the risk of chronic diseases (Hasler 2002; Das et al., 2011; Sharma and Sharma 2016). Such biologically active ingredients are now popularly known as neutraceuticals. Whereas, the functional foods are the foods that resemble traditional foods but possess demonstrated physiological benefits. In some countries, however, functional foods and nutraceuticals are used interchangeably. Regardless, the main focus of such products is to improve health and reduce disease risk through prevention. The main difference of this category with pharmaceuticals is that they are multi-targeted mixtures and present at low concentration while pharmaceuticals are uni-targeted pure compounds with high dose use. Hence, an overview on the concept of nutraceutical and functional foods, their classification, development and regulations is summarized in this article.

5.1 Introduction

Chilli is a tropical vegetable crop but considered as an important spice crop of India. Chilli is mainly used in culinary purpose for adding flavour, colour and pungency. It is consumed both in mature and immature stage. In immature form it is valued for pungency and in ripe dried form it is valued both for pungency and colour. Dry chilli powdered or ground into a paste and even green chillies are used for curries, sambars, rasam and other savory dishes to impart pungency, colour and flavour to food items. It is widely used in the manufacture of curry powder, curry paste and all kinds of pickles and preparing sauce, soups, salads etc. In food and beverage industries chilli is being used in the form of oleoresin which permits better distribution of colour, flavour in food. Capsaicin, the pungent principle, is present in cores or septa walls and placenta. It is used in the preparation of balms, whereas the colour extracts (Capsanthin/carotenoid pigments) find use as colour additives in food industry, poultry and prawn feed industry. Green chillies are rich in Rutin which has pharmaceutical use and known as Vitamin P. Oleoresin present in chilli permits better distribution of colour and flavour in food as compared to chilli powder due to cleanliness and uniform flavour. Oleoresin is used in preparation of processed products and also in a number of pharmaceutical formulations. A non-conventional use of chilli is for self-defence sprays of capsicum oleoresin at ultra-high emission rate which temporarily immobilizes the attacker. Highest pungent chilli of the world is Bhoot Jolokia/Naga King chilli (Capsicum chinensis) in NE India. Hotness of Naga king Chilli is 10,01,304 SHU (Scovonelle Heat Unit). At present chillies are grown in almost all states of the country. The major chilli growing states are Andhra Pradesh, Karnataka, Maharashtra, Odisha, Tamil Nadu, Madhya Pradesh, West Bengal and Rajasthan. Within a span of over four centuries, it has spread to an area of around 0.8 million ha. The area and production keeps varying depending on price fluctuations and the weather conditions. Area under chilli cultivation in India is 0.831 million ha with a production 1.87 million tonnes of dry chilli. Andhra Pradesh has been leading both in area and production contributing on average of 25 per cent of the total area and over 40 to 50 per cent of the total production. Chillies have adapted very well to the Indian condition so that, India is considered as secondary centre of origin.

1. Rearing of fowls for eggs and flesh is known as  ….

 a) Poultry keeping b) Husbandry   

 c) Sericulture d) Apiculture

 2. The types of poultry birds are  ….

 a) Broilers b) Layers  

 c) General purpose birds d)  All of these

 3. The layers are reared mainly for  ….

 a) Flesh b) Eggs  

 c) For both d) None of these

 4. Which of the following are layers?

 a) Anconas  b) Australorp   

 c) White leghorn d) All of these

 5. Broilers are reared for  ….

 a) Flesh b) Fish  

 c) Ornamental purpose d) All of these

This chapter begins with an introductory overview, providing a basic understanding of correlation and its types. It guides readers through in-depth analysis using R, demonstrating how to apply these concepts practically.

Correlation

Correlation analysis is a statistical method used to evaluate the strength and direction of the relationship between two variables. This analysis is vital in identifying and understanding how variables are interconnected within a dataset, providing insights into their mutual influences.

Key aspects of correlation include

• Range of the correlation coefficientThe value of the correlation coefficient (“r”) falls within the range of −1 to +1.

• Independence from origin and scaleThe correlation coefficient (“r”) remains consistent regardless of any changes in the origin or scale of the variables.

• Unit independenceThe correlation coefficient is independent of the units of measurement

of the variables.

• Relationship with independenceWhile uncorrelated variables are generally independent, the reverse is not necessarily true; independent variables will always be uncorrelated.

The horticulture sector of our country is following an increased growth in area and production by 9% and 14 % respectively for the past six years (2015-21). It is reported that the growth rate of horticultural crop production accounts for 2.7% per year. Fruits and vegetables are the major sectors contributing to total horticulture production. As per the report of second advance estimates published by Horticulture statistics division, Ministry of Agriculture and Farmers Welfare during 2020-21, our country recorded the highest horticulture production during 2020-21 with an annual production of 329. 86 million tonnes from an area of 27.23 million hectares and the vegetable sector shared around 196.26 million tonnes production from 10.80 million hectare area. India is the largest producer of okra and ginger and second largest producer of potato, onion, cauliflower, brinjal, cabbage etc. Vegetables also contribute to the export market and onion, mixed vegetables, potatoes, tomato and green chilli are the main vegetables exporting from our country. It is estimated an export of worth Rs. 4969.73 crores from vegetables during the year 2020-21.

Importance of Vegetable Seed Production

Though we are leading in many of the vegetables in area and production, our national average in productivity of the major vegetables is far less compared to the world average. The country s estimated vegetable production by the year 2050 is 375 million tonnes from 15 million hectare with an average productivity of 25 t/ha. Low productivity is mainly because the farmers are still relying on old varieties which are less yielding and susceptible to pest and disease. Unavailability of the quality seeds of newly released varieties is one of the main reasons for this production gap. A substantial increase in yield and quality of vegetable crops can be achieved by adopting suitable agronomic practices, plant protection measures and use of quality seed. Now a days, there is an increased demand for good quality seeds of open pollinated varieties as well as hybrid seeds through which an increased vegetable production can be achieved for meeting the requirement of increasing population. So far, very limited number of vegetable hybrids have been developed and released by public sectors and majority of the existing promising hybrids in vegetables are from private sectors.

The Review of literature is a systematic, explicit and reproducible method of identifying, evaluating and synthesizing the existing body of a completed and a recorded work produced by researchers, scholars and practitioners. The Review of literature is also a resource paper which includes the current knowledge including substantive findings as well as the theoretical and the methodological contributions to a particular topic. These are available mostly in academic and scholastic journals.

Review of literature provide the basics for research in nearly every academic f ield. This chapter is an extensive survey of all past studies relevant to the field of investigation which gives knowledge of what others have found out in the related field of study. In any scientific investigation or research, a comprehensive presentation of the review of literature is a statutory requirement.

The aim of review of literature is to highlight what has been done so far in the field of interest and how our findings are related to earlier research.

Its main functions are to develop a better understanding of the problem to be investigated, delineate a new area of study and avoid unnecessary duplication, decide on the tools and techniques to be adopted including developing some new ones and also to relate the present study with the previous ones by finding out the areas of agreement and disagreement.

The review of literature may

(a) Indicate the following by providing referential inputs – Approaches, Methods, Variables used, Statistical procedure, Expected results.

(b) Provide theoretical background to the study.

(c) Help to justify how the findings are related to the body of knowledge in the f ield of research.

(d) Establish a link between what we have proposed to study and what has already been found. It helps us to refine the research methodology.

 

A variety of glassware like burettes, pipettes, measuring cylinders, flasks, separating funnel etc. are used for experimental purposes in a laboratory. All of these need to be used and handled correctly, otherwise the chances of experimental error and damage to the glassware increase significantly. Being made of glass, they need special care while washing and using in experiments because even a minor mistake in handling of glassware may result in breakage of the apparatus. With this precautionary note, let us discuss about some of the specific glassware used in the laboratories.

Burette

Burette is a long graduated glass tube with a stopcock at one end for delivering a known/desired volume of a liquid, especially in titration experiments. It contains a stopcock at the lower end and a tapered capillary tube as the stopcock’s outlet. The flow rate of liquid from the tub stopcock’s outlet can be controlled with the help of stopcock valve. Burette is used for measuring the volume of a solution/chemical added in a quantitative (titrimetric) estimation experiment.

Procedure of using a Burette

The burette reading must be noted before and after delivering the chemical/ solution from the burette. The difference in these two readings is the volume of the chemical/solution released out of the burette. The solution should be released slowly/drop-by-drop to avoid any experimental error/mistake. If the solution/chemical is allowed to pour out too fast, the wall of the burette will not drain properly and some liquid may remain sticking to the surface of the walls. Moreover, excessive amount of chemical may be released/dropped during the experiment, particularly during the titration experiment wherein we need to know the exact amount of acid/base needed to get neutralization point. Thus, any minor mistake may lead to get a faulty reading. The measuring capacity of a burette usually used in a laboratory is 50 mL.

Introduction

The soil is an invaluable resource that sustains life in innumerable ways. It provides a dynamic foundation for agriculture, supporting growing crops, and serving as a habitat for organisms. It plays a crucial role in maintaining biodiversity. Additionally, soil acts as a filter, purifying and storing water, and it reserves essential plant nutrients. however, soil resources face various threats that endanger their health and productivity. Soil erosion, the removal of the top layer of soil through natural or human-induced processes, poses a significant challenge. It not only leads to a loss of fertile soil but also causes widespread environmental degradation, and reduced agricultural productivity in response to this difficulty, soil conservation emerges as a principal priority. Soil conservation incorporates a range of practices and strategies to prevent soil erosion, and promote sustainable land use. By adopting and implementing effective soil conservation measures, we can safeguard this irreplaceable resource for future peers and ensure food security and environmental sustainability.

The main highlight of the study is to shed light on the causes and consequences of soil erosion, exploring different conservation practices and techniques; also to understand the vital processes and factors contributing to soil erosion, including wind and water erosion. Additionally, to study its impact on soil and crop production and strategies for different conservation practices to mitigate erosion, preserve soil fertility, and ensure the long-term sustainability of our agricultural systems and ecosystems.

Introduction

Decentralization means the action or fact of reducing or undoing “centralization” or “concentration.” The dictionary meaning of decentralization is “The process of transferring the functions from the Central Government to the local units.” Decentralization is devolving power of decision–making with the lower level of organization. In a decentralization, delegation and devolution of power are given to the lower level. Devolution implies a situation in which lower ranking units acquire greater autonomy in respect of certain defined functions, including decision-making authority. Devolution of functions, powers, and responsibilities are normally granted through legislation.

Decentralized Planning in India

With the introduction of the Community Development Programme (CDP) and National Extension Service (NES) in 1952, increasing agricultural production had been on India’s agenda in different plan periods. The success of CDP and NES was reviewed by the Balawant Rai Committee in 1957 and the committee realized that community development can be achieved only when the community understands its problems, owns its responsibilities, exercises the necessary powers through its elected representatives, and maintains a constant and intelligent vigilance on local administration. The recommendation of the committee led to the preparation of plans at the level of state, district, block, towns, and Panchayats in the second plan period from 1957 to 1962. The Fourth Evaluation Report (Programme Evaluation Organization, Planning Commission) in 1959 recommended that organized and institutional participation by the public in development programs is bound to give better, more consistent, and more lasting results. In 1977, Ashok Meheta Committee suggested changing the concept of Panchayati Raj to a political institution. In 1981, the eminent economist Prof. M.L. Dantewala observed that the merit of decentralized planning is derived from its ability to discover dormant resources and skills and its endeavor to activate them. However, there was slow progress in decentralized planning up to the eighth plan (1992-97).

It is the scholastic and theoretical exercise that configures the operational definition and text of entire research work. The conceptual inputs, axiomatic inputs, logic of discourses and the pursuit knowledge come together to frame the theory in compliance and in congruence with the set of objectives and research designs spelt out in the research process.

3.1 Definition of Farmer, Farm, and Farming System

A farmer is a person engaged in agriculture, raising living organisms for food or raw materials. The term usually applies to people who do some combination of raising field crops, orchards, vineyards, poultry, or other livestock. A farmer might own the farm land or might work as a laborer on land owned by others. In most developed economies, a “farmer” is usually a farm owner (landowner), while employees of the farm are known as farm workers (or farmhands). However, in other older definitions a farmer was a person who promotes or improves the growth of plants, land or crops or raises animals (as livestock or f ish) by labor and attention. Over half a billion farmers are smallholders, most of whom are in developing countries, and who economically support almost two billion people. Globally, women constitute more than 40% of agricultural employees.

A farm is an area of land where livestock (animals) are raised and crops (plants) are grown for use as food, fiber, and fuel. The people who own and work on the farm are called farmers.

Introduction

Quality is very important in any production and operation system. It ensures whether the products produced or the services provided are of the right quality in right quantity at right time. Quality management must ensure proper quality of the product to survive in the market and expand its market. Quality of the product must be given importance to avoid quality failures that cause serious human inconveniences and wastage of money.

5.1. Definitions and Terminologies

5.1.1. Quality

We say a product is of satisfactory quality, if it satisfies the consumers. According to C. D. Lewis, a British writer, quality is “an asset which is offered to the potential customer of that product or service”. The International Organization for Standardization (ISO) has put up a more comprehensive definition of quality as “the degree to which a set of inherent characteristics fulfils requirements” (ISO 9000: 2005 – 3.1.1). In general terms, ‘quality’ is defined as the composite of characteristics that differentiate individual units of a product to determine its acceptability by the customer. Quality characteristics are nothing but elements that makes a product fit for use. Quality characteristics are further classified into categories called as parameters.

5.1.2. Total Quality Management

Total Quality Management (TQM) is an organization’s management approach, centered on quality. It improves the effectiveness and flexibility of a company or an organization. TQM is defined as “the system of establishing defect prevention actions and attitudes with a company or an organization on a permanent basis for the purpose of assuring conforming products or services directed at customer satisfaction”. TQM is based on the participation of all its members in decision making, which is aimed for long-term success, through customer satisfaction and benefits to the members of the company or organization and to the society.

Introduction

In all countries, food is governed by a complexity of laws and regulations, which set out the Government requirements to be met by food chain operators to ensure food safety and quality. Food laws and regulations also govern standards that ensure the safety, quality, composition and suitability of food for consumers. Food laws and regulations of any nation depends on whether a nation adopts International norms developed by the Codex Alimentarius Commission (CAC) of the Food and Agriculture Organization (FAO) of the United Nations as well as the World Health Organization (WHO).

8.1. Food Laws

Food law means legislation that regulates the production, trade and handling of food. It covers the regulation of food control, food safety, quality and relevant aspects of food trade across the entire food chain, from the production to the consumer. Food laws protect the consumers against unsafe, adulterated and misbranded food and facilitate the movement of food across borders to sustain a fair trade.

Each nation administers its own laws, regulations and standards. It is also not static always and is constantly revised and updated in all nations. The food business operators (FBO) must obtain up-to-date information on any changes made in legislation, that are likely to affect the product standards. The regulations of all nations shall be obtained from their respective websites of the national ministries.

8.1.1. International Legislations

8.1.1.1. United States of America (USA)

In USA, the Food and Drug Act (1906) and the Federal Meat Inspection Act (1906) are the first federal food laws passed to protect American consumers. Later, Food, Drug and Cosmetic Act (1938) regulated the meat and poultry products. At present, Food Safety Modernization Act (FSMA), 2011 regulates all food products. https://www.fda.gov/food/guidance- regulation- food- and dietary- supplements/ food- safety- modernization- act- fsma. Manufacturers play important role in preventing food borne illness. The Act gave the Food and Drug Administration (FDA) the authority to oversee and enforce supply chains. The Act shifts the focus towards prevention of food borne illness and insists every FBO to register with the FDA.

Introduction

Wastes produced during fish processing operations can be solid or liquid. Solid wastes consist of skin, viscera, fish heads, fish bones, and scraps of f lesh. Liquid wastes are the blood water and brine from drained storage tanks, water discharges from washing and cleaning, blood and soluble substances from entrails, and detergents and other cleaning agents. The effluent from the processing of fatty fish contains very high levels of oil. Overall, the wastewater from fish processing operation contains an undefined mixture of substances, mostly organic in nature.

13.1. Physicochemical Parameters of the Wastewater

13.1.1. pH

The pH is an important parameter that reveals contamination level before biological treatment. The effluents from fish processing plants are usually close to 7 or alkaline, due to decomposition of the proteinaceous matter and emission of ammonia compounds.

13.1.2. Solids Content

Solids may be present either in dissolved or suspended form. Suspended solids are objectionable as they settle in the wastewater ducts reducing their capacity or settle in the waterbody affecting bottom - dwelling flora or sometimes float reducing the light entering from the surface or remain suspended reducing the amount of light that enters the water. The settling solids are measured using an Imhoff cone. If the wastewaters contain solids that settle after 10 min, their discharge is usually not permitted. The suspended solids are measured by passing a sample through a fiberglass filter; and determining the quantity by gravimetry, after evaporation of a known volume of the filtrate.