eChapters

1. Introduction

Underutilized fruits and vegetables are commercially neglected but recognized as rich sources of nutrients and non-nutrient bioactive compounds (Ali et al., 2008). These crops are very popular among local communities in many parts of the world and well accepted in their traditional diets and therapeutic medicines (Animesh et al., 2010). Nowadays, these are gaining significance in research and development programs of many organizations. Meghalaya is endowed with rich and unique diversity of indigenous wild edible fruit species of which most of them are less known and underutilized (Haque et al., 2009). There are rich in functional bioactive components such as vitamins and minerals are the much talked dietary nutrient for women and children health. It is being supplied to body through tablets, vegetables, fruits and other food items (Islam et al., 2012).

1. Introduction

Ohmic heating is an emerging method of thermal processing which have the feature of HTST treatment (Halden et al., 1990) with lower energy inputs (Choi et al., 2011; Sastry et al., 2011). During ohmic heating (Fig. 1) the alternating current is passed through the food material, where food acts as a resistor to the flow of electric current and leads to the instant volumetric heat generation by following the Joules first law of heating (Pereira & Vicente 2010; Lima et al., 1999 and 2001; Wang, 2014). Ohmic heat treatment of food material has been found to reduce microbial load of the food material simultaneously with the inactivation of the inherent enzymes (Demirdoven & Baysal 2014; Yildiz & Baysal 2006; Jakob et al., 2010). Despite the problems of electrochemical degradation associated with it, ohmic heating has been successfully studied for its use in preheating, blanching, pasteurization and extraction (Leizerson, & Shimoni, 2005; Lima & Sastry, 1999; Lakkakula et al., 2004). A majority of studies that have explored the effect of ohmic treatment have focused on a number of commercial products from pulp (strawberry), or puree (pea) to juice (grape), etc. (Castro et al, 2004; Icier et al, 2008; Icier et al., 2006). However, the present chapter is confined to put some light on the studies conducted on ohmic heating of various liquid food material and its effects on various parameters of the food material.

1. Introduction

Biopolymers nowadays are grabbing a nice place in packaging industries replacing synthetic polymers. The most important advantage of biopolymer over synthetic polymers is that they are biodegradable and can be developed from agricultural or food processing wastes. Among the wide variety of materials currently used in food packaging, polymers have taken a major share because of their versatility and advantageous performance (Valdés et al., 2014). However, most polymers used for food packaging are not biodegradable or compostable and therefore represent an increasingly serious end-of-life disposal problem worldwide. Although food package stability during the shelf-life of the product is an advantage, it turns into a disadvantage when the packages enter the post-use phase.

1. Introduction

Kiwi fruit (KF) is very much acceptable for preservation by freeze-drying (FD) technique, since it has very much health benefits such as low calorific value, low glycemic index (GI), more vitamins (particularly vitamin C), maximum load of potassium, presence of variety of pigments, few important enzymes, low allergic response (AR) and finally it is rich in natural antioxidants, polyphenols. It is translucent, green pulp and many black seeds arranged nicely with covered by hairy and brown skin. The KF seeds are small sizes and black colored surround inner circularly through the whole pulp. It gives a nice crunch during consumption and provides a number of essential nutrients. Therefore, it will be remembered that seeds cannot be discarded during processing of KF unlike other fruit (jamun etc. ) seeds.

1. Introduction

Cassava (Manihot esculenta Crantz) is a tuberous root crops. It is known as “U mangra” in Manipuri. It is also known as mandioca or tapioca, yucca, mosioc. Cassava belongs to Euphorbiaceae family The cassava plant is of perennial woody shrub in nature. (CGIR 2011; FAO-2015, Zhu 2015). Like paddy and wheat as staple food crops, cassava is also staple food crops for many countries. It supports millions of population especially in South American and African countries. It is also known as food security crop because of its ability to withstand harsh environmental conditions when other food crops cannot sustain and destroy. It can grow in low fertility soil, marginal land with less agricultural maintenance. It resists to pest and diseases so cultivation is easy to carry out with less expenditure. Cassava is abundantly grown in Manipur mostly in hilly areas. To some extent, it is consumed as snacks item either by burnt in fire or charcoal or boiled form with little addition of salt. The fresh young leaves and roots after removing its cover is used as ingredients of “singju” a salad type traditional snack items of Manipur. Out of cassava sweet snack item locally called “manghra heingan” in Manipur is also prepared. For making this sweet item, cassava is boiled with sugarcane molasses until it is cooked and reach certain sugar consistency of molasses. This sweet item is similar with murabba available in Indian market.

1. Introduction

The growing prevalence of obesity and obesity associated disorders as well as its impact on public health has received increased attention in recent years. As a result, obesity is now considered one of the world’s leading public health problems. A study published in the noted medical journal Lancet says India is just behind US and China in this global hazard list of top 10 countries with the highest number of obese people. The study - titled ‘Global, regional, and national prevalence of overweight and obesity in children and adults during 1980-2013: A systematic analysis for the Global Burden of Disease Study 2013’ - used data collected by international bodies and organizations in various countries like India over three decades. China and India together accounted for 15 per cent of the world’s obese population, with 46 million and 30 million obese people, respectively. According to the study, the number of overweight and obese people globally increased from 857 million in 1980 to 2. 1 billion in 2013. This is one-third of the world’s population.

With lifestyle disorders forcing more and more people to reel under excess body weight, even relatively younger people are developing joint disorders and knee pain. Excessive weight is associated with a series of health problems, including blood pressure, diabetes, and cardiovascular ailments. Therefore there in an urgent need to envision effective anti-obesity strategies through effective interventions.

1. Introduction

With increase in consumer awareness and lifestyle the interest for health promoting natural food ingredients has expanded in recent years. However, globally it has become a great challenge to the manufacturers to ensure that such compounds should remain in their active form during processing and storage with an emphasis to its bioavailability profile. Oxidative stress is the major contributor to the pathogenesis of a number of chronic and degenerative diseases including atherosclerosis, Alzheimer’s and Parkinson’s disease, diabetes, DNA damage, carcinogenesis, cardiovascular and neuro degenerative diseases, allergies, premature ageing etc. (Gupta et al. , 2014; Svetli et al. , 2010). Endogenous antioxidant defense mechanisms are not always sufficient to fully scavenge the free radicals formed in the body during various processes. Therefore, dietary components having antioxidant properties, such as tea flavonoids, are very much necessary to supplement the activity of endogenous antioxidants. Tea is one of the most concentrated sources of flavonoids and phenolic acids which show antioxidant activity by sequestering metal ions and by scavenging reactive oxygen and nitrogen species (Frei & Higdon, 2003).

1. Introduction

Jackfruit is the largest edible tree borne fruit in the world (Baliga et al., 2011). According to Haq (2006) India is considered as the birth place of jackfruit. The major jackfruit producing states in India are Assam, Tripura, Bihar, Uttar Pradesh, the foothills of the Himalayas and South Indian States of Kerala, Tamil Nadu and Karnataka. Jackfruit is a fruit prized in some areas of the world and allowed to go waste in others. According to Sidhu (2012) the extent to which jackfruit is being wasted in India is not exactly documented however, the wastage is approximately 75%. On an average a fully developed fruit may weigh 10-25 kg. Seeds occupy around 10 to 15% of the total weight of the jackfruit (Bobbio et al., 1978). It is reported that jackfruit seeds contain high amount of protein, fiber and carbohydrate (Ocloo et al., 2010). The seeds are viable for not more than three or four days (Sidhu, 2012). According to Abedin et al. (2012) the industrial utilization of jackfruit pulp are varied but the seeds are discarded from those food industries. Moreover, mature fresh seeds cannot remain fresh for long as they tend to germinate easily. So, converting jackfruit seed into flour is an option in order to increase the shelf- life of the seed and can substitute various cereal based flours for developing food products. Dumpling is a type of food which is made out of small pieces of dough wrapped around a filling that may include vegetables, meat, or other ingredients mixed together.

1. Introduction

The term nanotechnology was first coined by Norio Taniguchi in 1974 to describe controlled thin film deposition (Taniguchi, 1974). Nanotechnology is now generally recognized to include materials with a size in at least one dimension in the 1-100 nm range, although this terminology is not strictly enforced (Rao, 2008). In food science, there are many types of naturally occurring particles that fall within this size range and the use of a strict definition is problematic due to the large distribution of sizes (Kruif, 1998). Many natural foods contain nanoscale components and their properties are determined by their structure. These have been eaten safely for generations. In fact, some of food’s most important raw materials (proteins, starches, and fats) undergo structural changes at the nanometre and micrometre scales during normal food processing(Morris and Parker 2008). Food proteins (for example, native beta-lactoglobulin, which is about 3. 6 nm in length) can undergo denaturation (via pressure, heat, pH, etc. ) 

1. Introduction

The Refractance Window drying system uses circulating hot water, usually at 90°C and at atmospheric pressure, so that it can carry the thermal energy to the material to be dehydrated. Thermal energy is transferred to the wet product from circulating hot water through a plastic interface which is transparent to the infrared radiation. The actual product temperature is kept below 70°C. The heated water is recycled and reused, which helps in improving the thermal efficiency of the system. The use of hot water as the heat transfer medium and at temperatures just below boiling is a design feature that is unique to this drying method. In RW drying, there are three modes of heat transfer, namely conduction, convection, and radiation. The process water is heated by steam within an insulated tank and then circulated in shallow troughs to transfer thermal energy to the plastic conveyor. As the plastic conveyor is very thin, it reaches the temperature of hot water flowing beneath it almost immediately. By conduction and radiation, the thermal energy from the hot water is transmitted through the plastic conveyor. The use of process water at temperatures just below boiling and a thin plastic conveyor with infrared transmission in the wavelength range that matches the absorption spectrum for water all work together to facilitate rapid drying.

1. Introduction

Rasogolla is a sweetened dairy product which is made from milk mainly from casein protein. Generally rasogolla is made by heating the raw milk around 80-850C ,then slowly cool the milk around 650C and acid coagulation of the milk is done. Then separate the channa (mainly casein) and whey, and drained the whey followed by the pressing of the channa to remove the excess water. Then channa is thoroughly kneaded and are rolled to balls and cooked in sugar syrup and get the rasogulla. Total value of 1000 billion for Indian dairy output in 2001, the output of traditional dairy products is estimated at over 400 billion. The share of the organized sector in the indigenous products is at present only 50 billion only (Patil, 2005).

1. Introduction

Cherry peppers (Capsicum frutensis var. cerasiforme) which is locally known as dallae khorsani, is one of the important cash crops of Sikkim and Darjeeling hills. They are small, round shaped, fleshy and heavily seeded. They are green in color in early stage of fruiting and turn red when fully matured. It is an excellent source of vitamin A and C, which are important antioxidants (Howard et al., 1994). Cherry peppers are an ideal size for pickling or brining. Its hotness ranges from moderately mild to very high.

Due to its high moisture content (about 85% w. b. ), shelf life of cherry pepper is limited to 7 - 10 days. This makes it rare and costly during the off season. Hence, preservation of cherry peppers is of considerable importance both to the farmers as well as to the consumers. Drying is one of the oldest methods for preservation of cherry peppers to make it available throughout the year. To increase shelf life of chilies, drying up to 10 % moisture content (dry basis) is required which is accepted in export market.

For drying chillies, sun and hot air drying are the most common drying method used. However, due to the prolonged drying time of 16-48 h, the quality of the dried chillies is reduced (Kim et al., 2002). Many researchers paid more attention to innovative techniques such as short and medium-wave infrared radiation drying (SMIR) which not only maintain product quality, but also increase the drying rate. Moreover, infrared drying could save up 50% energy compared to convective drying (Nowak & Lewicki, 2004). The ability of infrared radiation to penetrate and heat the inner layers results in higher rate of heat and mass transfer (Ginzburg, 1969).

1. Introduction

Osmotic dehydration is a useful treatment of dehydration compared to the other dehydration processes, as other dehydration processes bring adverse and irreversible changes in physical and nutritional status of food material. Recently in many studies it was found out that since plant membranes are semi-permeable in nature, not only moisture but transfer of solute from osmotic solution to the food material also takes place. Another kind of transfer which was also noticed is the leaching of micronutrients from the cells of food to the osmotic solution, but the amount being very low, this transfer can be neglected. (Mayor et al., 2006). The mass transfer kinetics was studied for different food materials (Hawkes and Flink, 1978). Effect of different variables such as pressure and temperature were also studied (Rastogi and Niranjan, 1998). The effective diffusivities for both water loss and solute gain can be calculated by using various methods which gives the rate of diffusion of solute and moisture for the food material. The finding of solute gain and leaching of micronutrients pointed the requirement of maintaining the osmotic dehydration process, which could be done by maintaining the process variables of osmotic dehydration. Impact of various process variables on osmotic dehydration and their best levels at which maximum water loss and minimum solute gain could be obtained had to be calculated out. For this purpose, optimization of process variables through response surface methodology (RSM) could be best utilized (Uddin et al. , 2004). RSM is a statistical tool which gives the random combinations of input variables to give the best output result as required. Various works have been done on optimization of process conditions of osmotic dehydration taking different samples of foods. In this study, bamboo shoot species (Bambusa balcooa) was taken as sample for osmotic dehydration to optimize the process variables for osmotic dehydration of bamboo shoots using salt as osmotic agent followed by calculation of effective diffusivity of water and solute during osmotic dehydration of bamboo shoot.

1. Introduction

Citrus is a common term and genus (Citrus) of flowering plants in the Rue family, Rutaceae. Citrus fruits are non-climacteric and respiration slowly declines and the production and release of ethylene is gradual. India ranks sixth in the production of citrus fruits in the world. Citrus wastes typically are about 45- 50% of the weight of citrus original and the percentage of waste to 30-50% for vegetables and fruits in general. Natural colour plays a significant role in determining the degree of consumer acceptance of the product. In addition, carotenoids (vitamin A precursor) have high nutritional values which are important for human nutrition.Francis and Isaksen (1988) stated that carotenoids play a very important role for extraction as for protection of health against cancer, cardiovascular and eye disease and as anti-oxidant. Carotenoids play important roles in human nutrition through their provitamin A activity, but also by acting as antioxidants, for prevention of age-related macular degeneration or skin protection against UV radiation. The antioxidant capacity of carotenoids was proved for pure compounds as well as for plant extracts and food. The main objective of this research work is extraction, determination and identification of natural colorants from different citrus wastes (citrus peel). Also to study the effects of pH and oxygen on the stability of extracted pigments and determination of the specific carriers for the extracted pigments using solid matrices (starch, dextrin, arabic gum and flour).

1. Introduction

The emergence of food borne illness due to contaminated food is one of the most frequently occurring event and challenge for the food processing industry. This has resulted into economy as well as energy requirement to counter the food borne pathogens. Some of the important pathogenic microorganisms of concern are E. coli, Listeria monocytogenes, salmonella, etc. To address the food safety and quality issues, several non-thermal food processing technologies have been developed in the last decades, with an aim of achieving food safety without significantly affecting the quality of the food product. Cold plasma in one of the non-thermal processing technology, which has shown promising results as evidenced by recent scientific investigations.

The plasma is known as fourth state of matter after solid, liquid and gas state. Plasma contains diversity of energetic species including ions, electrons, atoms, excited molecules and charged particles. In a plasma, a significant number of electrons have such a high energy that no nucleus can hold them. When a gas is subjected to heat or an electric field, some of the atoms become ions and the gas is said to be ionized. An ionized gas in its normal condition, can conduct electric current to a limited extent. If the heat or electric current becomes extreme, many of the atoms become ions. The resulting super ionized gas, which can conduct a large and sustained electric charge. Plasmas are used in several materials processing industries like textiles, electronics, paper and glass industries etc.

    1.    Rice is a
        a)    Edible fruit    b)    Edible Vegetable
        c)    Edible flower    d)    All
    2.    Major components in cereal seeds are 
        a)    Endosperm    b)    Germ or embryo
        c)    a & b    d)    None
    3.    Bran is composed of 
        a)    Pericarp    b)    Testa
        c)    aleuron layer    d)    All
    4.    Oats contains ______________ percent of hull
        a)    50    b)    40
        c)    30    d)    20

Aim

To know the method of rehabilitation of downed animal within exercise wheel cart.

Indication

Irreparable trauma to vertebral column,permanent paralysis, downed animal.

Aim of Rehabilitation

To assist the animal to stand.

To facilitate normal respiration in animal.

To ensure normal feed and water Intake.

To ensure that rumination,defaecation and urination are normal.

Recommended Duration for Slinging Large Animal

Aim: To know slinging duration for large animal.

Indication: Downer cow, sternal redumbency, hypocalcemia, hypomagnesemia, limb or spinal injury, cases,related to parturition.

Indication: Rehabilitation of downer animal

It consists of 2 parts-A) fabrication of fixed supporting frame B) fabrication of animal swing frame.

Fabrication of fixed supporting frame -

Materials required - Bamboo pole and rope

Fabrication Technique - Size a frame 3m for large animals, 2.5m for medium sized and 2 ml for small sized animals.

Fabrication of animal swing frame-

Materials required - Strong fixed rectangular iron frame

Fabrication technique - The required no. of bicycle tyres are fastened upon the frame. All individual tyres are tied with jute threads at 3-4 places.

Purpose

To make a list on the requisites on materials required for preparation of rehabilitation mobile sling for large animals.

Introduction

A downer cow is an animal In sternal recumbency and isn’t showing obvious clinical sign of hypocalcemia,hypomagnesmia or any limb or spinal Injury. Most causes are related to parturition, occurring in few days before or upto a week after calving.

Causes for Making an Animal Downer

Animals Inability to stand may be caused by illness or injury. Following may be the reasons

1. The plaster-bandage wrap cast :(Negative cast)

The amputee was restrained on lateral recumbency keeping the amputed leg upwards.

A thin, moistened stockinet was pulled over the stump and it was maintained snugly in place by tying with a string at the top.

The moistened cast stockinet was marked with indeliable pencil indicating prominences with a cross and other sensitive areas with a circle (Fig.1).

Plaster bandages were then wrapped as pen requirement unit I the shell has a thickness of approximately 3mm in proximal third.

After plaster hardened, it was removed either by pulling out or longitudinal splitting with a cutter (Fig.2).

Bone section method

Advantage

Recommended for artificial limb fitting.

Non-weight bearing of stump is marked. Fig- 2a.

Indication

Necrosis, Gangrene, Extensive injury of nerve of hind limb.

Malignant neoplasm

Frost bite. Burns

Incurable peripheral vascular disease.

Indication: Irreparable damage of the meta tarsal joint.

Indication

Irreparable injury.

Frost bite, burn.

Malignant neoplasia.

Incurable peripheral vascular disease.

Necrosis, gangrene, extensive injury of nerve of fore limb.

Definition : It is a technique in which foreiirnb is amputed from elbow joint. Indication : Incurable damage of radius ulna.

Indication: Irreparable damage of metacarpal bone.

Indicaton: Irreversible damage of both the bovine digits & to provide a foot pad for comfortable walking of animal

Joint disarticulation: Unwanted limb is amputed by joint disarticulation method.

Site of amputation along with skin-muscle flap ratio

Fore limb:
Elbow disarticulation
Carpo-metacarpal disarticulation
Fetlock disarticulation

Aim

Study about method of apposing muscle, fascia, skin over amputed stump.

Indication

Proper healing of amputed stump, avoiding infections.

Description

Limb is amputed generally through diaphysis or by disarticulation method. Whatever is the amputation,the surgeon should always keep as much soft tissue as possible to cover the bone extrimities. It is difficult to achieve in large animal, when amputation is immediately below carpus or tarsus.