eChapters

Introduction

With the major thrust of extension agencies now focused on production techniques, the market-led extension holds the key to the future. This assumes greater significance in the light of the new international trading regime under WTO as the export opportunities are now being opened-up to India, which may have direct implications on agro-enterprise development.

In the light of the above, the extension functionaries in India are presently ill-equipped to deal with such challenges. It appears now that the production of the agri-produce is going to be dictated by market requirements. In this age of WTO, the extension methodology also needs to work out for dissemination of good agricultural practices to the farmers based on internationally accepted standards. This recommendation has now been made in the 05th National Extension Education Congress held in 2009 jointly conducted by Indian Council of Agricultural Research (ICAR) and CS Azad University of Agriculture and Technology, Kanpur (Proceedings of the 05th National Extension Education Congress, March 05-09, 2009, ICAR and CSAU, Kanpur). 

Introduction

The egg production in India is 75 billion and the broiler production is 4.2 million tonnes per annum. The growth rate of layer market is 6-7 percent per annum and broiler market is 8-10 percent per annum. The Indian poultry sector is valued at INR 1 lakh cr or USD 15.38 bn. Approx. 80 percent of egg production is contributed by commercial poultry farms, remaining comes from household/ backyard poultry. Backyard poultry plays a key role in supplementary income generation and family nutrition to the poorest of the poor. It is estimated that there are around 30 million farmers engaged in backyard poultry as per 19^th Livestock Census. Backyard poultry are being practiced for its inherent strengths. Free range birds reared by the farmers have the advantage of small body size, coloured plumage, broodiness to hatch chicks, adaptation to harsh climatic condition, lower diseases and production with least investment. The birds are scavenging in the backyard, supplemented by kitchen waste and are kept in low height houses for shelter using locally available materials. It helps to improve the nutritional status of rural poor and also improve the subsidiary income of the poor people. Such stocks make minimal use of land, labour and capital and integrate well into the backyard. Backyard poultry production system is self-sustaining because of minimal needs and can be afforded by poor people of the rural areas. The high yielding white feathered chicken varieties being reared in the intensive poultry farming are not suitable for backyard / free range backyard poultry farming due to the adverse climatic and high pathogen load prevailing in such rearing practices. Backyard poultry farming is an in-separable part of the poor tribal people and it will continue to be due to its advantages. Although backyard poultry production is not an occupation per se, it often supplements household income, primarily for poor families. Strengthening backyard poultry production may help overcome poverty and malnutrition in impoverished communities. However, the effect of climate change on these birds needs to be studied for its sustenance.

Mesenchymal stem cells are multipotential cells capable of proliferation and differentiation into chondrogenic, osteogenic and adipogenic lineages. Minimal criteria for defining MSC according to International Society of Cell Therapy (ISCT) are (a) they must be plastic-adherent when maintained in standard culture conditions, (b) MSC must express some surface antigens such asCD105, CD73, CD90, CD44 and must not express CD34, CD45, CD 14, CD19, and HLA-DR, and (c) MSC must differentiate in vitro into osteoblast, adipocytes and chondrocytes under specific differentiating condition. 
Although MSC is traditionally isolated from bone marrow, more recent reports have detailed the isolation of cells with MSC characteristics from a variety of tissues including umbilical cord blood, chorionic villi of the placenta, Wharton’s jelly, peripheral blood, fetal liver and lung, adipose tissue, skeletal muscle, periosteum, deciduous teeth, amniotic fluid and synovium. Bone marrow and periosteum sources are richest in young animals with their numbers diminishing, but still present in old age. One of the attractive advantage of bone marrow derived mesenchymal stem cells (BM-MSCs) as a source of cell transplantation is their low immunogenecity. Recently, several studies have reported that BM-MSCs may be immune-privileged cells that do not elicit immune response due to an absence of their immunologically relevant cell surface markers. BM-MSCs also are known to inhibit proliferation of T lymphocytes, B lymphocytes, dendritic cells and natural killer cells.

Stocking fingerlings in grow-out ponds increases survival rates, cut-down culture duration, better feed management and reduce risk-factors on account of natural as well disease occurrence. In pond culture, good amount of fry-size seed suffer predation from enemies such as snakes, birds and predator fishes, if any and mortalities due to disease occurrence as smaller size fish is more vulnerable. However, fingerling stocking reduces predation loss to a greater extent, increase survivals, allow better feed management and highe production. This is truer with carnivorous fishes and particularly those observe cannibalism. Qin and Fast (1996) stated that the rate of cannibalism is higher in small size (TL) predators than the larger in case of striped murrel, so stocking large size fingerling in culture ponds reduces chances of ICC and hence recommended for grow-out production.

7.1 Traditional Methods of Fingerling Rearing

Wee (1981) has defined traditional system of murrel farming in Thailand in which seed of murrel was procured from wild resources and raised to large fingerling size before stocking. Two type of practices being used to raise fingerlings. In the first one, the pond(s) designated for fingerling production are stocked with brooders of SFs so they could spawn in the stocking pond(s) few days before the stocking of striped murrel fry and could directly feed upon the juvenile SFs. In second system, the fingerlings were reared to accept small-size fish (SF) along with rice bran to cut down cost of feeding on production of fingerling. In recent, more systematic approaches have been made to wean the seed collected from the wild resources on inert diets totally. The protocol adopted for weaning the fingerling on inert diet includes initial feeding with cut pieces of SFs and then gradual supplementation of inert diet till fingerlings start relishing inert diet completely.

1. Biosecurity

Biosecurity is strategic and integrated approach encompasses policy frameworks to analyze and manage risks for food safety, animal life and health and plant life and health including environment.

2.1 Introduction

The biochemical environment for egg production and ovulation egg fertilisation is provided by the poultry oviduct. The chickens have two ovaries and an oviduct when they are hatched, but the growth of the right ovary and oviduct stops and regresses over time. The left ovary and oviduct are still functioning and help produce eggs. The oviduct is a long tubular structure that is divided into five functionally and histomorphologically distinct segments: the infundibulum, which is the site of fertilisation, the magnum, which produces egg white components, the isthmus, which forms the egg shell membranes, the shell gland or uterus, which produces the calcified eggshell, and the vagina (oviposition or egg laying).

Introduction

Pedology:- Pedology word drive from Greek word pedon, means soil or earth and logos means to study. Pedology is concerned with origin of the soil, its classification, distribution and character (Physical, Chemical and Biological).

Definition:- Soils are natural bodies made from both mineral and organic materials and capable of supporting plants out-of-doors.

Composition of soil on volume basis (Soil components)

i. Mineral matter :- 45%

ii. Organic matter :- 5%

iii. Soil water :- 25%

iv. Soil air :- 25%

Soil formation is a long term process. It takes several million years to form a thin layer of soil. The soil is made up of broken down rock material of varying degree of fineness and changed in varying degrees from the parent rocks by the action of different agencies such that the growth of vegetation is made possible. As soil is a complex mixture of various components, its formation is also more complex. The Formation of a particular type of soil depends upon the physico-chemical properties of the parent rock, intensity and duration of weathering, climatic and other parameters.

Ultrasonography has an importance place in human practice and veterinary f ield especially in canine practice. Since many years two dimensional ultrasound has been used for scanning purposes both in human and animal practice. But the scenario has changed in human practice with development of three dimensional technology and later four dimensional ultrasonography has developed which shows movements of the objects being scanned especially in the case of fetuses. Nowadays it has been common to use these advanced technology in the human practices. Yet these technologies are in the childhood stage in the veterinary field. High cost of 3D/4D ultrasound equipment, operational difficulties in non sedated animals & lack of specific knowledge about the operation of volume scanning hinder the use of this technology in the veterinary field. Better understanding of the different application of these technologies can be made to use in research areas for the better understanding of the abnormalities, post therapeutics as well in the diagnosis of the diseases

Principle of Three Dimensional and Four Dimensional Ultrasonography

Sound waves of frequency higher than human audible frequency usually ranges from 2-13 MHz are used in ultrasonography. Depending upon on depth of tissue from the scanning surfaces frequency is selected. Three dimensional ultrasonography gives three dimensional images of the volume being scanned .it works on the same principle of 2D ultrasonography but ultrasonographic beams are sent different angles to get three dimensional image of object being scanned. Volume information is obtained either directly using 2D array probe or by reconstructing three dimensional volume from a series of continuous or non- continuous 2D images by using software (Fenster and Downey, 2000). An advancement of 3D technology is 4D ultrasound. Four dimensional ultrasound adds the fourth dimension as time and gives a dynamic real-time 3Dultrasonography of the concerned organ with a continuous volume image acquisitioned rendering process. (Khurana and Dahiya, 2004).

DUS testing is a way of determining whether a newly bred variety differs from existing varieties within the same species, or the characteristics used to establish distinctness are expressed uniformly and that these characteristics do not change over subsequent generations. Testing the distinctness, uniformity and stability (DUS) of crop varieties is a statutory requirement before varieties can be entered into the Registers of Cultivars (National Lists) and/or granted Plant Breeders’ Rights (PBR). In India, Protection of Plant Varieties and Farmers’ Right (PPV&FR) Act (2001) provides the registration of new variety of plant if it conforms to the criteria of distinctness, uniformity and stability.
Why do we need a DUS test? New (candidate) varieties should be distinct from all other varieties whose existence is a matter of common knowledge, and also sufficiently uniform and stable with respect to the characteristics used to demonstrate distinctness. ‘Common knowledge’ is broadly defined to include all known varieties, i.e. any variety entered into or subject to an application for PBR, varieties grown commercially, held in publicly accessible reference collection, or of which there is a published description (UPOV 2002).
The responsibility for DUS testing of potato varieties in India lies with the ICAR-Central Potato Research Institute (CPRI), Shimla, which is the national institute for potato research and development. Currently a set of 51 DUS characters in potato are defined by CPRI and being used for distinguishing new variety.

Phosphorus is essential for plant growth and is involved in important physiological processes, but its availability in soil is strongly influenced by soil chemical conditions. This chapter provides a systematic treatment of phosphorus management in irrigated soils. It begins with the functions of phosphorus and the classification of soil phosphorus into organic and inorganic forms. The behaviour of phosphorus in alkali soils is discussed along with phosphate fixation, which can substantially influence phosphorus availability to crops. The chapter examines the sources of soil phosphorus used by plants and the major types of phosphatic fertilizers used in agricultural production. Available and total phosphorus are distinguished, providing a basis for assessing soil phosphorus status. The behaviour of phosphate fertilizers after application is considered in relation to their efficiency and crop uptake. The residual value of phosphatic fertilizers is also discussed, highlighting the continuing contribution of applied phosphorus to subsequent crops. Overall, the chapter emphasizes efficient phosphorus management to improve nutrient availability, fertilizer-use efficiency and sustainable crop production in irrigated soils.

Gaillardia is a hardy flowering crop appreciated for its colourful blooms and suitability for loose flower production, landscaping and ornamental purposes. The chapter introduces important Gaillardia species and hybrids and discusses their origin, genetics, botanical characteristics and commercially useful varieties. Production aspects include suitable temperature, sunlight, soil, propagation, seed sowing, nursery raising, transplanting, nutrient management and irrigation. Cultural practices such as weeding and regular removal of spent flowers are included to maintain continuous flowering. The chapter further describes important pests and diseases, including aphids, thrips, powdery mildew, smut and aster yellows. Harvesting during the early morning, cold-chain requirements and yield are also explained

Thiamann (1948) designated the plant hormones by the term ‘phytohormones’ in order to distinguish them from animal hormones. He defined a phytohormone as “an organic compound produced naturally in higher plants, controlling growth or other phy-siological functions at a site remote from its place of production and active in minute amounts.”

According to Johannes van Over-beek (1950), the plant hormones are defined as “organic compounds which regulate plant physiological process – regardless of whether these compounds are naturally occurring and/or synthetic; simulating and/or inhibitory; local activators or substances which act at a distance from the place where they are formed.”

The change of state of water form solid or liquid to gaseous form is known as evaporation. It may be defined as the water loss in vapour form from a soil/water surface. The energy used in this process is called as latent heat. The energy of 540 cal/g of water is used in this process. This process plays a major role in the redistribution of thermal energy between the earth and the atmosphere. Water vapour diffuses into the atmosphere from the different natural surfaces like ocean, river, lake, pond, soil and plant etc. It is difficult to measure the evaporation from the natural surfaces. To measure the evaporation from open water surface is easy and is normally in practice. The rate of evaporation is dependent on the size of the measuring surface (Pan) at constant wind speed below saturation point. Therefore a measured surface (Pan) is designed to measure the evaporation.

Genus : Zizyphus /Rhamus
Species : mauritiana Lam. jujube Lam.
Family : Rhamnaceae
Chromosome No. : 2n = 24, 48, 96

According to famous writer David Fairchild it is the jujube, the large fruited Chinese type which is at its best compared to the inferior type which are in abundance in Arabia, northern India and southern Europe. The resultant inferior fruits are either from a different species compared to those of China or from varieties which have not been much influenced and improved by selection and cultivation.

ABSTRACT

This paper reviews the various application of hyperspectral remote sensing data carried out by the scientists of India emphasizing its advantages.

1. INTRODUCTION

The most significant recent breakthrough in remote sensing has been the development of hyperspectral sensors. The ‘Hyper’ in hyperspectral means ‘too many’ and refers to the large number of measured wavelength bands. Hyperspectral images are spectrally over determined, which means that they provide ample spectral information to identify and distinguish spectrally unique materials. Hyperspectral imagery provides the potential for more accurate and detailed information, extraction than is possible with any other type of conventional remotely sensed data.

Imaging spectroscopy (Goetz et al., 1985) in hyperspectral imaging is concerned with the measurement, analysis, and interpretation of spectra acquired from a given scene (or specific object) at a short, medium or long distance by an airborne or satellite sensor. The concept of imaging spectroscopy originated in the 1980's, when A. F. H. Goetz and his colleagues at NASA's Jet Propulsion Laboratory began a revolution in remote sensing by developing new instruments such as the Airborne Imaging Spectrometer (AIS), then called AVIRIS, for Airborne Visible Infra-Red Imaging Spectrometer (Green et al., 1998). This system is now able to cover the wavelength region from 0.4 to 2.5 μm using more than two hundred spectral channels, at nominal spectral resolution of 10 nm. The special characteristics of hyperspectral datasets pose different processing problems, which must be necessarily tackled under specific mathematical formalisms, such as classification and segmentation (Jia et al., 1999, Green, R 1998) and spectral mixture analysis (Adams et al., 1986; Smith et al., 1990a, b).

The female genital organs (Fig. 4-6 A) comprise the ovaries where the female gametes (ova) are produced, the uterine (fallopian) tubes which convey the ova to the uterus and where the fertilization takes place, the uterus in which the ovum and the embryo develops, the dilatable passage formed by the vagina and vulva through which the foetus is expelled to the exterior and the mammary glands (udder) which is functionally associated with the female genital organs. All of these except the mammary glands are located in the abdominal and pelvic cavity while the mammary glands are located outside the cavity in the perineal region.

Ovaries

The ovaries are two small oval glands measuring about 3.5 to 4.0 cm in length, 2.5 cm in width and about 1.5 cm in thickness and they weigh about 15 to 20 gm. They are oval in form and are situated a little above the middle of the pelvic inlet and approximately 40 to 45 cm cranial to vulvar opening in a middle sized cow. They are attached to the sublumbar region by the cranial part of the broad ligament of uterus, the mesovarium. Each ovary presents for description two surfaces, two borders and two extremities. The medial and the lateral surfaces of the ovary are smooth and rounded. The attached or mesovarial border is convex. It is enclosed in a part of the broad ligament termed as mesovarium. The vessels and nerves reach the ovary by way of mesovarium to this border and enter the gland through the hilus. The free border which is also convex presents a notch in its middle. The ovarian vessels and nerves enter the gland through this notch. The cranial or tubal extremity is rounded and is related to the fimbriated end of the uterine tube. The caudal or uterine extremity is also round but narrower and is connected to the horn of the uterus by the ovarian ligament.

The knowledge and principles from interconnected disciplines of bioengineering, material science and life sciences are combined in tissue engineering with the aim of developing a construct that can wholly or partly restore/maintain/augment the function of a damaged tissue or organ. Tissue engineering construct generally comprises cells on a suitable scaffold. The ultimate functionality of a tissue engineering construct is mainly dependent on the cell behavior on scaffolds. The proliferation and cell viability on scaffolds varies from one cell type to another and from one species to another. So it is important to investigate individual cell-scaffold combinations.

The similarity in structure and composition to bone mineral, osteoconductive properties, ability to integrate with the bony tissue and absence of immune response makes hydroxyapatite [Ca10 (PO4)6(OH)2] the choice of calcium phosphate biomaterial with only disadvantage of slow rate of resorption. On contrary, silica–calcium phosphate composite in comparison to calcium phosphate is rich biomaterials having a faster resorption rate. Studies have shown that coating of hydroxyapatite with a calcium silicate containing layer encourages cell proliferation and osteogenic differentiation of human bone marrow-derived stromal cells.

In this chapter a composite scaffold (calcium silicate, hydroxyapatite and tricalcium phosphate), namely HASi with elements in the following percentages: 66.36 % - calcium, 25.35 % - phosphorus and silicon - 8.29 % and porosity of 50 – 500 µm is undertaken to evaluate the rBMSC proliferation and differentiation properties in vitro with the aim of assessing cytocompatibility of HASi and rBMSC in terms of cell attachment, cell morphology, cell proliferation and osteogenic differentiation.

Introduction

Turkey (Meleagris gallopavo) domestication occurred in Central Meso America at least 2000 years ago from wild turkey. Domestic turkey is a popular and it is raised throughout the world. Commercial industrial farming has made it very economical for the amount of meat produced. Commercial turkey farming is a profitable business. Turkey grows faster like broiler chicken and become suitable for slaughter purpose within a very short time. Turkey farming for meat production is very popular than egg production. Turkey farming is similar to other poultry farming like chicken, duck, quails etc. Turkey is a very social with human; and raising it is really very fun and enjoyable.

Turkey farming is a big business in U.S. and some other western countries. It is almost non-existent in India. America is leading producer (55%) and after that >France>U. K.>Netherland. It is one of the white meat choices famous for its leanness and delicacy. In India, small flocks reared in C.A.R.I., Haryana Agriculture University, Bangalore University, Kerala Veterinary University.

Definition

Garret (1970) defined biological control as any condition under which or practice whereby survival or activity of a pathogen is reduced through the agency of any other living organism (except man) with the result that there is a reduction in the incidence of the disease caused by that pathogen.

Baker and Cook (1974) stated that the biological control is the reduction of inoculum density or disease producing activities of a pathogen or parasite in its active or dormant stage, by one or more organisms, accomplished naturally or through manipulation of the environment, host or antagonists, or by mass introduction of one or more antagonists.

Biocontrol can be simply defined as the application of living organism to control diseases.

Advances in molecular biology have sharpened the tools of the breeders, and brighten the prospects of confidence to serve the humanity. The application of biotechnology to field crop has already led to the field testing of genetically modified crop plants. Genetically engineered Rice, Maize, Soybean, Cotton, Oilseeds like Rape seed, Sugar Beet and Alfalfa cultivars are expected to be commercialized in the late of 20^th century. Genes from varied organisms may be expected to boost the performance of crops especially with regard to their resistance to biotic and abiotic stresses

Genetic engineering involves isolation of DNA fragments within a cell recombining them outside. The basic technique is quite simple. Two DNA molecules are isolated and cut into fragments by one or more specialized enzymes, the fragments joined together in a desired combination, then restored to a cell from replication and reproduction. This method also referred to as recombinant DNA technology. Genetic engineering developed in the mid 1970 when it becomes possible to cut DNA and to transfer particular pieces of DNA containing specific bits of information, from one type of organism into other.