eChapters

The process through which heat energy is transferred from a body at higher temperature to a body at lower temperature without any material medium between the two bodies is x called radiation. The outer surface of the the Sun is at higher temperature compared to the surface of the earth. Solar radiation is the electromagnetic energy emitted by the Sun. It is the primary source of energy for the Earth’s climate system, driving atmospheric and oceanic circulation, influencing weather patterns, and sustaining life through photosynthesis.2 This energy  travelsthrough space as electromagnetic waves, encompassing a broad spectrum of wavelengths, from high-energy gamma rays and X-rays to ultraviolet, visible, infrared, and radio waves. The portion of this spectrum that reaches the Earth’s surface is crucial for a multitude of processes, making the study of solar radiation fundamental to understanding our planet’s environment. This introduction will lay the groundwork for exploring the characteristics, distribution, and interaction of solar radiation with the Earth’s atmosphere and surface.
4.1. Wave Length of Radiation
The wavelength of radiation refers to the distance between two consecutive peaks or troughs of a wave. It’s a measure of the length of one complete cycle of the wave (Fig. 4.1).

5.1 Introduction

Energy in the form of heat is one of the main energy requirements in domestic, agricultural, industrial and commercial sector of our economy. From an enduse point of view, solar thermal energy finds its application in these areas. Solar thermal energy devices convert radiant energy of the sun into thermal energy for different productive works. In fact, solar energy consists of infrared radiation, it is characteristics of infrared radiation that whenever it falls on any object, it converts into thermal heat energy.

The conversion of sun light into thermal energy is easily or conveniently achieved by means of a metallic or plastic cover, painted black with ordinary black board paint or having selected coating over it and covered with one- or double-glazing cover for transmitting solar radiation inside it. This metallic cover is known as absorber, below it either channels or pipes or passages for allowing entry of water or air are provided, through which heat energy is transferred to working medium either air or water. The absorber plate is covered with suitable thickness of insulating material on its back or sides for preventing loss of heat from the absorber plate. This complete system is enclosed in an airtight box. When exposed to solar radiations, the blackened metallic surface absorbs solar energy and converts into heat. This heat could be used for cooking of food, heating of water and air, evaporation of moisture form the grains etc. In fact, absorber works on the principle of black body, which absorbs maximum and a good absorber, is a good emitter. Hence generated heat could be utilized for different applications.

Greenhouse essentially functions based on solar energy to control environment for protecting cultivation from adverse condition. Computer simulation and mathematical modeling are important tools for determining the energy efficient design as well as predicting the overall system performance. The greenhouse climate may be used for crop drying, distillation, biogas plant heating, space conditioning, and aquaculture. Thus, any required configuration of greenhouse can be thermally modeled for predicting and optimizing the performance. The solar energy based greenhouse modeling are useful in evaluation of various applications like greenhouse heating, greenhouse cooling, greenhouse drying and aquaculture greenhouse. Greenhouse clubbed with ground air collector increase in plant and ambient temperature of 5–7°C during night in winter. Whereas, using evaporative cooling pad with greenhouse reduces the ambient temperature of 4–5°C during midday summer. A greenhouse can be very well used for large-scale crop drying, while not in use for cultivation. Some other applications such as covered crop drying and aquaculture are also discussed.

Abstract

The primary commercial energy sources such as coal, oil and natural gas poses an enormous challenge to our development goals including environmental degradation, as India is not well endowed with these exhaustible natural resources. Further, these conventional sources are also not available in right quantity and producing environmental pollution manifold in land, air and water. There are number of unit operations in food processing and value addition consuming bulk of conventional energy sources where renewable energy sources can easily be integrated for energy conservation and environment protection. There is significant potential for application of Renewable Energy Sources in different unit operation of food processing including drying of food products for energy conservation and for reducing hydrocarbon emissions.

Introduction 
In a time when the world is in dire need of sustainable energy solutions, investigating biofuels becomes an essential path to supplying the always expanding supply[1]. This book chapter explores the dynamic world of solid and liquid biofuels, providing a thorough analysis of their properties, methods of production, uses, and wider ramifications in relation to renewable energy sources. Setting the scene, the introduction clarifies the role of biofuels in the larger context of renewable energy. Exploring solid and liquid biofuels becomes critical as the globe struggles with issues like climate change, depleting fossil fuel reserves, and the need to switch to cleaner energy sources[2]. These biofuels, which are defined as energy carriers made from biomass, offer a viable substitute and have the capacity to both reduce environmental impact and promote energy security. As the chapter progresses, biofuels are divided into two main categories: liquid and solid. Biofuels that are solid, such as wood, agricultural leftovers, pellets, and briquettes, serve as a starting point for investigating alternative energy sources. This section walks readers through the complexities involved in producing solid biofuel, including harvesting, pre-treatment, and creative pelletization methods. By doing this, it highlights the renewable nature of solid biofuels and their ability to lower greenhouse gas emissions, highlighting their benefits for the environment. Simultaneously, difficulties associated with its application, ranging from administrative worries to land use issues, are examined closely. Turning its attention to liquid biofuels, the chapter tells the story of ethanol, biodiesel, and advanced biofuels. By examining the choice of feedstock, manufacturing procedures, and real-world uses, it highlights the adaptability of liquid biofuels in the energy system. Although they are not without difficulties related to land use, food production, and water use, their ability to function with current infrastructure and their critical role in improving energy security stand out as distinguishing characteristics[3].

Introduction

The huge nutritious potential of agricultural based byproducts has generated an interest of nutritionist for utilizing them in efficient ways in order to improve the production of animals. In this concern, solid state fermentation (SSF) is a promising and novel technique. The lignocellulosic structural characters of plant residues provide them a solid support and act as substrates for the microbial fermentation to produce certain value added products through SSF. The scope of SSF in the field of animal nutrition is wide, in terms for the production of enzymes, bioactive components, organic acids, vitamins, and feed additives, bio-transforming products, biological degradation and detoxification of agricultural residues/wastes. 

Introduction

One of the major problems being faced by cities and towns relate to management of municipal solid waste (MSW). Waste quantities are increasing day by day due to the increasing population and the municipal authorities are not able to upgrade or scale up the facilities required for proper management of such wastes. In many cities and towns, garbage is littered on roads and foot-paths. Citizens are also not accustomed to use the available storage facilities (dust bins) set up by the authorities. At large, lack of organized system of house- to-house collection of waste has created the littering habits. By and large, hardly we can see any city/town complying with the Municipal Solid Wastes (Management and Handling) Rules, 2000 in ‘totality”. As per information provided by Central Pollution Control Board (CPCB), 1,27,486 TPD (Tons per day) municipal solid waste was generated in the country during 2011-12. Out of which, 89,334 TPD (70%) of MSW is collected and 15,881 TPD (12.45%) is processed or treated.

In spite of various measures taken towards the proper waste collection, segregation and disposal, proper waste processing units were established as per the following details as per CPCB. The waste processing technologies reported in the country are; composting, vermi composting, biogas plant, RDF- pelletisation and others. Some of the sepelletization plants are associated with power plants for generation of electricity. However, mechanical composting and vermi composting are more popular in the country.

Waste is not actually waste but is the by-product of various activities of human life. The unclean handling of these wastes creates problem for public health departments and local bodies. The classification of waste depends on the agencies that classify these wastes according to the area of interest and method of disposal viz. medical field, agricultural field, local bodies, industries etc.

In the present paper, the emphasis is given to the classification based on agricultural activities which includes a) Agricultural marketing waste b) Meat and fish marketing waste.

3.1. SOLID WASTE MANAGEMENT

Solid waste management includes the transportation, processing, recycling and disposal of our waste materials. We live in a disposable world in many ways with the modernization and convenience of our world we have cluttered it with our refuse.

Solid wastes are all the wastes arising from human and animal activities, that are normally solid and that are discarded as useless or unwanted materials. It consists of the highly heterogeneous mass of discarded materials from the urban community as well as the more homogenous accumulation of agricultural, industrial and mining waste.

Urbanization, industrialization, and economic growth in India have all led to an increase in the generation of municipal solid waste (MSW) by a number of urban local bodies (ULBs). In cities with high population densities, SWM is a significant difficulty. Being a diverse country with a wide range of religious communities, customs, and traditions like India makes it more challenging to accomplish sustainable development in a country that is rapidly industrialising and improving its standard of living. Although there have been substantial changes in the social, economic, and environmental spheres, India’s SWM systems have mostly remained the same. Currently, 90% of residual waste is thrown in the informal sector rather than properly disposed of. To make SWM more sustainable, new management practises and disposal sites are needed. The inefficiency of the current waste management systems has a detrimental effect on the economy, the environment, and public health. The Ministry of Environment and Forests of India introduced regulations for garbage treatment, although there is irregular and insufficient compliance.

Overview
Humanity has produced trash since the beginning of time, whether it is from the bones and other parts of the animals they kill for food or the wood they harvest to build their carts. As civilization developed, garbage was produced that was increasingly sophisticated in character. The world of consumers emerged around the close of the 19thcentury as a result of the industrial revolution. The production of non-biodegradable solid waste led to an increase in pollution not just in the air but also on Earth itself. The rise in solid waste was also primarily caused by urbanization and population growth.
Definition of Solid Waste
Glass crockery containers, plastic containers, sludge, vehicle parts, and mounds of crop wastes are among the solid waste materials. These gather in public areas and hinder people’s regular activities.
Every family produces waste or rubbish on a daily basis. We usually toss away items that we no longer need or have any use for, which puts them in the garbage category. Depending on where it comes from, solid waste can take several forms. Understanding the proper ways to handle the trash produced has become crucial in today’s dirty world. One crucial technique for managing municipal solid waste is segregation. Representation provides a good understanding of segregation at source. Composting is a crucial waste management and treatment technique.

Solid wastes, the unavoidable consequences of civilization, are the useless and unwanted heterogeneous solid materials discarded by human being. Human greed is the major factor in creation of unwanted solid wastes. With increase in human population and its demands, there is an increase in production of various types of wastes. When human being did not come to the earth there was very little wastes like tree leaves, animal excreta or dead parts which nature used to digest and produces something beautiful every time. Still there are certain remote areas free from wastes where human being could not reach due to inaccessible condition of terrain, forests and islands. Now–a-days wastes are found even in the top of Mt. Everest or in the interior of Antarctica.

Solidago, commonly known as goldenrod, is an attractive filler-type cut flower valued for its bright yellow inflorescences and commercial potential. This chapter discusses its origin, taxonomy, botanical characteristics, genetics, varieties and environmental requirements. It explains seed propagation for breeding and vegetative propagation through rhizome suckers for commercial multiplication. Climate, soil, planting, nutrition, irrigation and cultural management are described, followed by pest and disease control. Harvesting, postharvest handling, grading, vase life and yield are also addressed. The chapter highlights commercially important cultivars and the crop's suitability for professional cut flower production and export markets.

Principle

Dried milled samples are extracted successively with diethyl ether, 0.5 percent ammonium oxalate solution, NH₂SO₄ and 72 percent sulphuric acid. Soluble carbohydrate in the ammonium oxalate extract determined with anthrone and hydrolysed pentosans and hexosans in the combined N H₂SO₄. Seventy two percent sulphuric acid extract are determined with aniline acetate and chromotropic acid respectively. The method gives a maximum variation of 4 percent from the mean of duplicates with each carbohydrate component. The residual material is ashed to obtain crude lignin and a nitrogen correction applied.

Soluble carbohydrate - this group, which includes sugars, oligosaccharides, and the fructosans of grasses, provides a source of nutrients  readily available to livestock.

Principle

Dried milled samples are extracted successively with diethyl ether, 0.5 percent ammonium oxalate solution, NH₂SO₄ and 72 percent sulphuric acid. Soluble carbohydrate in the ammonium oxalate extract determined with anthrone and hydrolysed pentosans and hexosans in the combined N H₂SO₄. Seventy two percent sulphuric acid extract are determined with aniline acetate and chromotropic acid respectively. The method gives a maximum variation of 4 percent from the mean of duplicates with each carbohydrate component. The residual material is ashed to obtain crude lignin and a nitrogen correction applied.

Soluble carbohydrate - this group, which includes sugars, oligosaccharides, and the fructosans of grasses, provides a source of nutrients  readily available to livestock.

I. Definition

Solute transport in plants, translocation, primarily occurs in the phloem, but it can occur in the xylem.

II. Solute Transport in the Xylem

Some solutes are transported in the xylem

Water and dissolved ions are the main substances in vessels/tracheids

These materials are transported via transpiration stream

Xylem sap may also contain organic materials, usually in relatively low concentration (with a notable exception being maple sap in the spring which is comprised of 2% or more sucrose).

Substances move at different rates depending on matrix effects, metabolic needs, etc.

Standard solution: Standard solution is defined as a solution whose strength is known. e.g. 1 N solution.

Molar solution: Molar solution can be defined as a solution containing the number of moles of a solute (substance) i.e. molecular weight in gram per litre of the solution. e g. Mol. wt. of NaCl 23+35.5 58.5,

So 58.5 g NaCl per 941.5 ml of water= 1 M NaCI solution. Molarity is generally designated by M.

Molal solution: Number of moles of a substance/solute per litre of solvent makes a molal solution. Mobility is generally designated by m.

Percent Solutions

There are three types of percent solutions. All are parts of solute per 100 total parts of solution. Based on the following definitions you may calculate the concentration of a solution or calculate how to make up a specific concentration

    1.    % W/W - Percent of weight of solute in the total weight of the solution. Percent here is the number of grams of solute in 100 grams of solution. 
        Example: 
        A 100% (W/W) NaCl solution is made by weighing 100 g NaCl and dissolving in 100 g of solution

    2.    % W/V - Percent of weight of solution in the total volume of solution. Percent here is the number of grams of solute in 100 ml of solution. This is probably the least significant way of naming a solution, but the most common way of doing it. In fact, any percent solution not stipulated as W/W, W/V, or V/V is assumed to be % W/V. 
        Example : A 4% (W/V) NaCl solution is 4 g of NaCl in 100 ml of solution.

    3.    % V/V - Percent of volume of solute in the total volume of solution %V/V. Percent here is the number of milliliters of solute in 100 ml of solution. 
        Example: A 10% (V/V) ethanol solution is 10 ml of ethanol in 100 ml of solution; unless otherwise stated, water is the solvent. 

Solvent extraction is mainly used to remove dissolved substances from solutions or soluble material from solids /powders/ solid mixtures. Solvent extraction is explained using distribution law or partition law. The law states that if to a system of two liquid layers made up of two immiscible liquids/ slightly miscible liquids is added a third substance soluble in both layers , then the substance distributes itself between the two layers so that the ratio of concentration in one solvent to the concentration in the second solvent remains constant at a constant temperature.

India has witnessed a phenomenal increase in foodgrains production since Independence and from a food deficit state producing about 51 million tons in 195051 it become food surplus country with a record harvest of more than 250 million tons in 201112. This particular year also saw a remarkable record production of pulses at about 18.1 million tons. However, to meet the increasing demand of the continuously rising population about 23 million tons of pulses have to be imported every year costing the country about Rs.3000 crores in foreign exchange. Despite the changes in the dietary habits in which the large middle class has moved away from traditional cereals towards high value dairy, meat, fruits and vegetable products, pulses in India are still considered an important source of proteins, particularly for the poor. Pulses are not only an excellent source of protein (2040%), carbohydrates (5060%) and minerals (24%) but also provide calories almost equal to that of cereals energy to the tune of 300 to 540 Kcal/ 100g (Ofuya and Akhidue, 2005). Thus, pulses play an important role in achieving food and nutritional security for small and marginal farmers. However, the per capita availability of pulses has been declining over the time – it has declined from 60.7 gm/ day in 1951 to about 32 gm/day in 2010 – mainly due to stagnant production (except in recent years), rising demand for consumption and other uses. Pulses not only are used for consumption, but also play an even greater role in maintaining and enhancing soil fertility through nitrogen (N₂) fixation. Though the estimates of Nfixed by pulses depends on crop species, soil type, agroclimatic zone and crop management practices, it was reported that early, medium and long duration pigeonpea varieties fix 7, 55 and 69 kg/ ha¹, respectively, in Vertisols of Patancheru (Kumar Rao and Dart, 1987). Pulses ^N2 are grown not only as sole crops but also as intercrops and the biological nitrogen fixation (BNF) of pulses substantially benefits the associated or succeeding crops in terms of nitrogen contribution (1668 kg/ N₂ ha¹ for succeeding cereals). Thus on a conservative estimate, the BNF (@46 kg/N₂ ha¹) by pulses, excluding the intercrop area, alone amounts to 1.06 million tons annually.

I. FILL UPS

1. Somatic embryo encased with artificial endosperm and protective cover is called _____.
2. The term artificial seed was coined by_____.
3. The artificial seed technology was patented by_____.
4. The most common gelling agent used for artificial seeds is_____.
5. In desiccated system, the artificial seeds are coated with _____.

ABSTRACT

Immature zygotic embryos were isolated from field grown papaya fruits harvested at 90-105 d post-anthesis. The embryos were placed on half-strength Murashige Skoog (MS) medium supplemented with 2, 4-D (2.0 mg l^-1) and cultured under dark for a period of 2 months. The frequency of callus formation was around 66%. After 2 months, calli were transferred onto a half-strength MS basal medium and cultured for 3 months with frequent subculturing (once in 3 wk) on the same medium. The frequency of somatic embryo formation was around 36.6%. The somatic embryos on MS medium supplemented with BAP (0.4 mg l^-1) and NAA (0.02 mg l^-1) germinated and produced shoots. The emerging shoots of 2-3 cm height with 2-3 trilobed leaves were placed onto an MS basal liquid medium with IBA (1.0 mg l^-1) for root induction. The plants developed with shoots and roots were planted in a pot-mixture (sand:soil:FYM) containing VAM.

A. Somatic Embryogenesis
 
In plant tissue culture, the developmental pathway of various well organised, small embryoids resembling the zygotic embryos form the embryogenic potential somatic cell of callus tissue or cells of suspension cultures is known as somatic embryogenesis. The capability of somatic cell of a culture to produce embryoids is known as embryogenic potential.

Embryoid: Embryoid is a small, well organised structure comparable to the sexual embryo, which is produced in tissue culture of dividing embryogenic potential somatic cells.

ABSTRACT

Techniques could be standardized for the induction, initiation, maturation and germination of somatic embryoids from the nucellar tissue isolated from 30-45 day old fruits of mono embryonic mango variety Neelum and poly embryonic variety Vellari Manga. The treatment half strength Murashige and Skoog basal medium containing 2,4-D 5.0 mgl^-1, GA3 5.0 mgl^-1, glutamine 400 mgl^-1, coconut water 200 mll^-1, activated charcoal 500 mgl^-1, sucrose 60 gl^-1and agar gl^-1was found to be the best in induction of embryogenic callus. The treatment 2,4-D 4.0 mgl^-1 + BA 1.0 mgl^-1+ GA3 5.0 mgl^-1in half strength MS basal medium supplemented with glutamine 400 mgl^-1, casein hydrolysate 500 mgl^-1, sucrose 60.0 gl^-1, coconut water 200 mll^-1and agar 6.0 gl^-1was the best in initiating somatic embryos from the induced nucellus of the three varieties. In the variety Neelum BA (8.0 and 16.0 mgl^-1) and kinetin (8.0 to 32.0 mgl^-1) were as effective as 2,4-D in inducing somatic embryogenesis. Polyembryonic variety Vellari Manga showed better response to induction treatments than the mono embryonic varieties. B5 major salts with MS minor salts in combination with 40 gl^-1sucrose, 10 gl^-1PVP, 200 mll^-1coconut water, 5.0 mgl^-1 ABA, 100 mgl^-1 casein hydrolysate and 6.0 gl^-1agar were the best suited for the maturation of the somatic embryos. The positive influence of cobalt chloride, casein hydrolysate and coconut water on the germination of embryoids of both mono and poly embryonic mango varieties could be well established. A basal medium consisting of B5 major salts and MS minor salts supported the highest percentage of germination of somatic embryoids in Neelum and Vellari Manga. However, abnormalities in germination were observed in most of the cases. Excellent germination of somatic embryos was observed in a liquid medium consisting of half strength B5 macro salts and full strength MS micro salts and supplemented with GA3 1.0 mgl^-1+ glutamine 400 mgl^-1 + sucrose 30gl^-1.

North Eastern Himalayan Region comprises mostly of seven states viz. Arunachal Pradesh, Assam, Manipur, Meghalaya, Mizoram, Nagaland and Tripura (Gill, 2005). This Himalayan Region stands entirely different from the rest of the country not only in language, dress, food habits and festivals but also differs in agricultural practices. Among agricultural practices shifting cultivation locally known as ìJhumî or ìBunî is the most important. According to Ministry of Agriculture, Arunachal Pradesh stands first in the ìJhumî cultivation followed by Assam, Manipur, Meghalaya (Agnihotri, 2003). In Meghalaya, the problem has assumed an epidemic proportion in Gargo hills where tracts of forests are burnt. The farmers of Khasi and Jainta Hills usually practise the ìBunî cultivation.

When dealing with the evaluation of the feeds and calculating the requirements of energy and protein for ruminants, it becomes necessary to inter convert values among different systems and units. Since the accuracy of conversions/equivalents and formulae used for calculating the requirements vary with different systems/constants used, the conversion factors and formulae given here can be used only as guidelines for routine purposes in laboratory or farms in feed formulation.

Crop growth rate (g m^_-2 day^_-1)

Crop Growth Rate is referred to a whole crop, so you need to consider the area of the ground where crop is present. It is measured as mass increase in crop biomass per unit ground area per unit time.
Equation for that is, CGR= W₂-W₁ / t₁-t₂

In nature, microbes are found as a mixed population. The types that encounter the most favourable environmental and other growth conditions emerge in abundance while others that find the environment less favourable are fewer in number. However, for any kind of study on them or for their use as a pure species, they have to be separated from other species. The nutritional media or culture media are different for different species. As the medium is specific for certain species, it checks or restricts the growth of other microbes for which it may not be suitable. However, some growth of and contamination by unwanted species may occur.

Receiving student award from Dr IP Singh Dean Veterinary Sciences
Receiving student award from Mrs (Dr) Shinade Acting Vice-Chancellor
Dr Rajendra Prasad award of ICAR-2002 (Union Agriculture Minister Shri Ajit Singh is giving award to Prof RS Chauhan in the presence of Shri Hukum Dev Narayan Yadav Minister of state and Secretary agriculture)
Receiving “Gopal Gaurav award” from Shankaracharya Shri Raghvendra Saraswati ji maharaj of Shri Ramchandrapuram muth, Shimoga Karnataka ^^xksiky xkSjo** lEeku izkIr djrs gq,
Dr Jeff G Vos Congratulating Prof RS Chauhan on becoming advisor WHO at NIPHE Bilthoven, The Netherlands.
 Dr RS Chauhan is with the Union Agriculture minister Shri Sompal Shashtri ji in a function of Prakrati Bharti at Kota (Rajasthan)
Dr RS Chauhan is with the Union Science & Technology minister Shri Bachi Singh Rawat ji in a function of SIIP at CIMAP Lal kuan (Uttarakhand)

Q.1 In random effect model, the treatments are taken as a random sample of treatments drawn from a large group of T treatments.

Q.2 In varietal trials for plant breeding or genetics, the appropriate statistical model is not the random effect model.

Food Safety and Standard Authority of India (FSSAI) has adopted the standards of Fruit Product Order (FPO).

Chutney

It is a product prepared by cooking the fruit pulp with added salt, sugar, spices, acetic acid and fruit to a suitable consistency so that it contains TSS not less than 50% and fruit part not less than 40% as per FSSAI specification. Sugar, salt, spices, acetic acid all act as partial preservatives. Preservatives may also be added in chutney for increasing its storability. Generally no artificial colour and flavor are required to be added.

Sauce

Sauce is a product similar to ketchup, prepared from pulps of tomato or other fruit/vegetable, having TSS not less than 15% and cooked to a suitable consistency with added sugar, salt, spices and vinegar. Sugar, salt, spices, acetic acid all act as partial preservatives. According to FSSAI specification fruit sauce should have minimum of 15% TSS and 1.2% acidity. Preservatives and colours may also be added for increasing of appearance and storability.

In meteorology, we often use some of the physical parameters to explain the physical processes taking place in the atmosphere. These parameters must have already appeared in the earlier chapters. However, these are given in this chapter to enable the readers to get acquainted once again.

16.1 Momentum

Momentum is defined as the product of mass and its velocity. In S.I. system units mass is expressed in kilograms and velocity in meters per second.

Momentum = Mass x Velocity

Units for momentum (S.I. system) = kg. m/sec

In C.G.S. System, mass is expressed in grams and velocity in cm/sec.

Units for momentum (C.G.S System) = gm.cm/sec

Abstract

The North-West Himalaya is bestowed with rich genetic diversity of minor temperate fruits representing the genera viz. Malus, Prunus, Pyrus, Rubus, Ribes, Sorbus, Cotoneaster, Myrica, Corylus, Crataegus, Punica, Hippophae, Elaeagnus, Viburnum, Vitis, Ficus, Citrus, Ziziphus, Morus,, Olea, etc. These species are known for their hardiness, adaptability to wastelands and tolerance to biotic and abiotic stresses. Apart from their easy availability, they assure some sustained yield and make our diet more diverse. Some indigenous species having potential for diversifying temperate fruit production are Pyrus pyrifolia, Diospyros lotus, Rubus ellipticus , R. lasiocarpus, R.. fruiticosus, Corylus colurna, Citrus pseudolimon, Hippophae rhamnoides and Pinus gerardiana. Some of the exotic temperate fruits viz. pineapple guava (Feijoa sellowiana), Chinese ber (Ziziphus jujuba), Japanese persimmon (Diospyros kaki), Rubus spp., Ribes spp, quince (Cydonia oblonga), medlar (Mespilus spp.), pecan nut (Carya illinoensis), hazelnut (Corylus avellana), husk tomato (Physalis spp.) and tree tomato (Cyphomendra betacea) have shown good performance at National Bureau of Plant Genetic Resources  Regional Station, Shimla.

26.1 Plant Available Fraction of Nickel, Cadmium, Lead and Chromium

The DTPA method was originally developed to extract Mn, Cu, Fe and Zn from slightly acidic to alkaline soils (Lindsay and Norvell, 1978), but in some cases it can be used for other metals also, such as Nickel (Ni), Cadmium (Cd), Lead (Pb) and Chromium (Cr). Among them Ni is considered as an essential micronutrient. The DTPA is used to extract soil metals by forming chelates with free metals in solution, which lowers their ionic activities so that additional quantities of metal are released from the soil colloids until equilibrium is attained. Triehanolamine (TEA) is used to buffer the extracting solution at pH 7.3 in an attempt to optimize the extraction of various metals. Calcium chloride is included in the extracting solution to minimize dissolution of CaCO₃.

19.1. Plant Available Fraction of Nickel, Cadmium, Lead and Chromium

The DTPA method was originally developed to extract Mn, Cu, Fe and Zn from slightly acidic to alkaline soils (Lindsay and Norvell, 1978), but in some cases it can be used for other metals also such as Nickel (Ni), Cadmium (Cd), Lead (Pb) and Chromium (Cr). Among them Ni is considered as an essential micronutrient. The DTPA is used to extract soil metals by forming chelates with free metals in solution, which lowers their ionic activities so that additional quantities of metal are released from the soil until equilibrium is attained. Triehanolamine (TEA) is used to buffer the extracting solution at pH 7.3 in an attempt to optimize the extraction of various metals. Calcium chloride is included in the extracting solution to minimize dissolution of CaCO₃.

Introduction

The method of obtaining the data for each and every unit belonging to the population or universe, which is the aggregate of all units of a given type under consideration, is known as complete enumeration survey or complete census. Examples of units are family, a period of time such as an hour, day, fishing village, fishing household, fishing establishment, fishing boat, fish landing centres etc. The type of unit to be considered would depend on the purpose of the view. The population may be finite or infinite. It is obvious that for any statistical investigation complete enumeration of the population is rather impracticable. For example, if we want to have an idea of the total catch of fish (monthly) in India, we will have to enumerate all the fishers who catch fish in the country, which is rather a very difficult task. If the population is infinite, complete enumeration is not possible. In addition, if the units are destroyed in the course of inspection, 100% inspection though possible, is not at all desirable. However, even if the population is finite or the inspection is not destructive, complete enumeration is not taken because it is time-consuming, expensive, and as well as it needs a large amount of resources in terms of trained personnel.

Introduction

A careful compilation and scrutiny of data of aquaculture variables is essential for appropriate statistical analysis and meaningful statistical inference and interpretation of results. In nature, many aquaculture variables are inter-related with each other and the changes in variables would often depend on different variables which are either correlated or independent. In some cases, the variables could also be intra-related over a period of time. For statistical analysis of data of aquaculture variables comprising of different physical growth variables like fish weight, body mass, length and bio-chemical growth variables like muscle protein, lipid, glycogen, protease etc. and variables like pond size, water and its quality, the environmental parameters, type of feed, chemicals used etc., appropriate statistical procedures of correlation and regression could be explored for statistical analysis, testing and interpretation of results. Different statistical procedures are used for analysis of aquaculture data with the objective of making an assessment of

Normal distribution :- A random variable x is said to be normally distributed with population mean u and standard deviation σ if it assumes the following distribution

Abstract

The Sonadi is an important breed of sheep in southern Rajasthan. Three districts namely Udaipur, Rajsamand and Chittorgarh were selected from major and Bhilwara from minor breeding tract for complete enumeration. Finally 450 shepherds were selected to collect the information with respect to demographical and geographical distribution as well as management practices. Among selected tehsils, two tehsils from each district were chosen for breed characterization. In all 6979 sheep from 147 shepherds of 49 villages in 8 tehsils were registered for breed characterization.

Sonograms of animals suffering from different diseases are presented along with other investigations as case studies to provide a comprehensive picture of the disease.

Architecture of the organ is affected in the primary or secondary diseases of the organs. Ultrasonography plays a significant role in detecting the changes in the organs in various diseases.

Abdominal organs in different species of animals have distinctive features with respect to their shape, size, location and echogenicity and echo texture. This is true for dogs and cats also. Therefore, information with respect to sonographic features of dogs cannot be taken for granted for cats in totality

Hydrogen sulphide, a gas with rotten egg smell, is traditionally considered as a toxicant and an environmental pollutant but recently, it has gained attention as a mediator of physiological and biological processes. The present study was undertaken to unravel the effect of H2 S on myometrial activity and its underlining mechanism in non-pregnant buffaloes. L-cysteine is considered to be main endogenous amino acid responsible for hydrogen sulphide formation due to the action of two cytosolic enzymes- cystathione ? synthase (CBS) and cystathione y lyase (CSE/CGL). Sodium hydrogen sulphide and GYY4137 are major hydrogen sulphide donors were used in this present study. In vitro- exposure of isolated buffalo myometrial strips to L-cysteine (10nm to 3mM) produced concentration- dependent uterotonic effect. L-cysteine induced uterotonic action is dependent on the activity of cystathione ? synthase (CBS) and cystathione y lyase (CGL/CSE) as evidenced by rightward shift of the DRC of L-cysteine in the presence of enzyme blockers (AOAA and PAG, respectively) it is to be further noted that following blockade of CBS and CSE enzyme, possibly some relaxant mechanism may get activated by L-Cysteine to produce uterine relaxation. The existence of CBS enzyme of molecular weight, 63kDa and CSE/CGL of 45kDa was observed by western blot technique. L-cysteine failed to produce any appreciable contraction in the absence of extracellular calcium. Further, in the presence of nifedipine, the uterotonic action of L-cysteine was completely abolished.