eChapters

Bovine pulmonary emphysema (BPE), also known as atypical interstitialm pneumonia (AIP) or fog fever is a respiratory condition in cattle characterized by the over-distension of alveoli in the lungs due to the destruction of alveolar walls. This results in impaired gas exchange and respiratory distress. The condition is more common in adult beef cattle, particularly those exposed to sudden dietary changes or grazing lush pastures rich in tryptophan. BPE can cause significant morbidity and mortality, leading to economic losses in affected herds.
Etiology
Bovine pulmonary emphysema (BPE) occurs when cattle are exposed to factors that damage the pulmonary system, particularly:
1. Lush pastures: Sudden introduction to green, high-protein pastures such as alfalfa, clover, or brassicas leads to excess production of toxic metabolites.
2. Dietary tryptophan: Lush pastures are high in L-tryptophan, which is converted in the rumen into 3-methylindole (3-MI), a toxic compound that damages lung tissue.
3. Dust and environmental irritants: Prolonged exposure to airborne irritants like dust, molds, or smoke can cause chronic lung injury.
4. Viral infections: Respiratory infections caused by viruses like bovine respiratory syncytial virus (BRSV) or parainfluenza virus can predispose cattle to BPE.

Lectins are sugar-binding proteins or glycoprotein of non-immune origin. In 1954 William C. Boyd alone and then together with Elizabeth Shapleigh introduced term ‘lectin’ from the Latin word lego- ‘chosen’ (from the verb legere ‘to choose’ or ‘pick out’).The earliest description of a lectin is believed to have been given by Peter Hermann Stillmark in his doctoral thesis presented in 1888 to the University of Dorpat. Stillmark isolated ricin, an extremely toxic hemagglutinin, from seeds of the castor plant (Ricinus communis).
History
Lectins, although first discovered more than 100 years ago in plants, and defined by their ability to selectively recognize specific carbohydrate structures, are ubiquitous in living organisms and throughout nature. Long before a deeper understanding of their numerous biological functions, the plant lectins, also known as phytohemagglutinins, were noted for their particularly high specificity for foreign HYPERLINK https://en.wikipedia.org/wiki/Glycoconjugate glycoconjugates (e.g. those of fungi, invertebrates, and animals) and used in biomedicine for blood cell testing and in biochemistry for fractionation.
Hundreds of lectins of plant and animal origin have been described, and the list continues to increase. The first lectin to be purified on a large scale and available on a commercial basis was concanavalin A, which is now the mostused lectin for characterization and purification of sugar-containing molecules and cellular structures. The legume lectins are probably the most well-studied lectins.

As homogeneity is a basic criterion, it is important to know the solubility of solutes, which is a temperature dependent property. Besides temperature, solubility is influenced by the acidity (pH) of the solvent due to the acid-base character of the solute. Bases tend to dissolve better in acidic solutions, whereas acids do in basic solutions. Therefore, one often needs to change the pH of solutions accordingly. As the most widely used concentration units (molarity, w/v% and v/v%) refer the amount of solute in a given volume of the solution, it is the volume of the complete solution that must be set to the desired (calculated) value thus, one must consider not only the solvent but the solute(s) as well. Another reason why one must add the solute(s) to an amount of solvent which is less than the final volume might be that one will need to set the pH subsequently in order to enhance solubility and/or to reach a desired pH value. The volume of acid or base solutions used for pH setting is usually not known in advance and is not negligible. If the solute was initially dissolved in the final desired volume, one would exceed this volume during pH setting (even if the volume of the solute is negligible) and, thus, the solution would not have the desired (calculated) concentration but a smaller (and mostly unknown) one. Thus, according to the correct procedure, one must take into consideration the fact that the final volume will contain the volume of the buffering component. value particularly in the case of dissolving proteins, which have a tendency to stick to the bottom of the dish, thereby making dissolution substantially slower.

When avoidance or tolerance of frost is not possible and frost damage is inevitable, the active methods of frost protection are the way out for the protection of the fruit plantations. The methods which are employed just before or during a frost event for avoiding freeze damage are called Active Frost Protection Methods.

Scanning electron-microscopes are available nowadays which operate at high vacuum as well as low vacuum mode. Low vacuum mode allows viewing of wet samples, but compromise on very high resolution and high magnification images. In high vacuum mode the samples must be absolutely dry and free of any organic contaminants to avoid gas molecules interfering with both the primary electron beam and the secondary or backscattered electrons emitted from the sample. Biological specimens which are largely composed of water, necessitate additional preparatory steps to ensure that structure of the organism is retained in its natural form.
Sample preparation is essential in scanning electron microscopy. Improper sample preparations can undermine the quality of results and lead to false conclusions. SEM, unlike TEM, allows the processing of larger sized organisms and tissues. For Biological samples the smallest representative sample size should be used as the microscope’s detection capacity is as much as 1μm from the sample surface.
Samples for SEM preparations are normally collected by biopsy/ dissection/ sacrificing of an animal to remove tissues from the main body. Incisions should be done with fresh sharp blades to avoid tissue deformation from the physical forces applied with blunt blades. Collected samples should be immediately transferred to vial containing the fixative for fixation.
Microbial cultures fixation of bacteria and fungus needs to be carried out under strict safety measures. Biosafety cabinets should be used wherever possible and sample should be removed from the biosafety cabinets only after the

Abstract

The present paper examines the effect of fodder cutting and uprooting activity on the cardiovascular system of farm women. The research design comprised of field study conducted on 30 farm women. The activity of cutting and uprooting were studied with the traditional tools as well as with the improved tools. Newly designed and developed slashing knife and uprooter were provided to the respondents for performing the activity of cutting and uprooting. The results revealed significant reduction in average working heart rate (2.08** - cutting and 4.99** - uprooting; Significant at 5% level) and peak heart rate (-3.55**- cutting and 1.70**- uprooting; Significant at 5% level).  It was found that there was significant reduction in muscular stress after use of improved tools over the existing tools.

13.1. CONTAMINATION

MICROFLORA: The flora of living fish depends upon the microbial contents of the waters in which they live. The slime in the outer surface of the fish contain bacteria of the genera: Pseudomonas, Alcaligenes, Micrococcus, Flavobacterium, Corynebacetrium, Bacillus, Sarcina, Serratia and Vibrio. The same species of bacteria are found in shrimps, crabs, lobsters and similar sea foods. Oysters and Shell fish that pass large amount of water through their bodies, pick-up soil and water microorganisms in this way including human pathogens. Common spoilage microorganisms of fish include species of Pseudomonas, Moraxella, and Acinetobacter, found mainly in marine fish, and Bacillus and Micrococcus, found in freshwater fish. Fish may also contain pathogenic (disease-causing) microorganisms such as Salmonella and Escherichia coli. Pathogenic contamination is of special concern with mollusks because they are often eaten raw and as whole animals.

SOURCES: Boats, boxes, bins, fish houses and fishermen are the sources of contamination of these bacteria. The bacterial population ranges from few hundred to few million per square centimeter. Because of their soft tissues and aquatic environment, fish are extremely susceptible to microbial contamination. At the time of harvest, fish carry a high microbial load on the surface of their skin, in their intestinal tract, and in their gills. The type and number of microorganisms that live in fish vary according to the season, the species, and the natural habitat. Additional contamination may occur during the harvesting, handling, or processing of the fish. Harvested fish must be immediately stored in a low-temperature environment such as ice or refrigerated seawater. This chilling process slows the growth of microorganisms that live in fish and inhibits the activity of enzymes. Because fish have a lower body temperature, softer texture, and less connective tissue than land animals, they are much more susceptible to microbial contamination and structural degradation. If immediate chilling is not possible, then the fish must generally be sold and eaten on the day of the harvest.

DEFINITION

Fore casting involves all the activities in ascertaining and notifying the grower of community that conditions are sufficiently favourable for certain diseases, that application of control measures will result in economic gain or on the other hand, and just as important that the amount expected is unlikely to be enough to justify the expenditure of time , energy and money for control. The above statement made explicit distinction between positive forecast and negative forecast and both have value for growers as well as society in general.

Positive forecast: Employs need based chemical sprays, provides adequate protection to crop and reduces damage to environment.

Negative forecast: Avoids unnecessary chemical sprays, no risk to the crop health and no disruption of environment.

Introduction

Canopy management is defined as managing plant architectural design as per need, using their inherent characteristics which is in accordance with a given set of conditions and resources to perform the plant maximum (Nath et al, 2014).The modern principles of sustainable fruit production systems focused on optimal use of natural resources (light, water, soil fertility) where the input (labour, energy, fuel, other material) and output (yield) are well balanced and the resources remain renewable.

Fruit orchards can be considered as artificial ecosystems converting the energy of photosynthetic active radiation (PAR) into edible, marketable fruits for human consumption. The core of this system is the bio-factory of leaves driven by the absorbed PAR. Several data support that the light interception is the basic factor for the modern orchard systems. Factors as LAI (Leaf area index), tree spacing, training and pruning systems, fruiting wood development, rootstocks and genotypes also have an important bearing on orchard efficiency.

The main objectives of canopy architecture is to develop strong tree framework, maximize utilization of light, accommodate more number of trees per unit area, maintenance of tree orchard uniformity and induce and sustain proper amount of well distributed fruiting terminals.

In order for the fruit production system to remain sustainable, the orchard system should favour the contributory role of an input of natural origin to the maximum possible extent, in improving the yield in the early years and provide high yields after the trees are mature until the planned age of the orchard. Recent development in the tree architecture has produced some promising tree training and pruning systems as well for high density fruit orchards.

Introduction

The interest in technology transfer traces back to the colonial era, which began by disseminating knowledge about the core industries of mining, plantations, and agriculture, which was seven decades ago. Technology has had a significant impact on human development and life growth throughout history. People’s life are constantly changing due of technology, whether or not they are ready for it. There has been so much change brought about by technology, and it has occurred at such a rapid pace that many times people lose their capacity to handle it successfully and pleasantly. In this scenario, more ideas are being created in the smaller globe, and technology’s residence time is getting much shorter.

Being polytocous animal, sow give birth several (8-14) piglets in each farrowing, mother pig find several deficiencies and disorders during gestation, farrowing and postnatal conditions. Prior to birth intrauterine competition amongst the feotus piglets for nutrition and gas exchange is a big stress for abortion. Several infectious and non-infectious causes may hamper proper growth and pathological conditions resulting mortality (15-20%) in piglets than weaner and adults (Sarma, et al, 2012). Several risk factors are also responsible for piglet mortality.

Prenatal factors: Insults during pregnancy can impact a piglet’s ability to survive after birth and regulate their body temperature. Some maternal aspects that affect survability and mortality amongst piglets are prolong farrowing duration more than 4 hours, number of parity of sow, usually first and second parity show high mortality than subsequent parities and also older sow lose more piglets.

Introduction

Livestock contribute directly to the livelihoods of nearly one billion of the world’s population. Livestock provide protein and minerals for human consumption, manure for crop production, and fibre and leather for industrial uses. Animals are also a source of draught power. Beyond their role of providing food and inputs for agriculture and industry, livestock provide security to farmers in developing countries, especially in emergencies such as crop failure. To many of the resource-poor, both smallholder farmers and landless livestock keepers, animals are a living bank, facilitating both income distribution and savings. In addition, by consuming crop residues and by-products, in addition to well-managed grazing, livestock production contributes positively to the environment, particularly in mixed crop-livestock production systems. Thus, livestock are an important source of income and employment that contribute to poverty alleviation and enhance the household food security of farmers.

Abstract

The present study aims to assess postural and muscular stress among farm women performing weeding and winnowing operations. Postural stress was assessed through postural deviation in spinal curvature, energy expenditure, physical cost of work, cardiac cost of work, pain in different body parts and muscular stress was assessed by percentage decrease in grip strength. Postural deviations were recorded with the help of flexi curve. Heart rate was calculated in 3 phases: before, during and after the work. Energy expenditure, physical cost of work, cardiac cost of work was also calculated. Grip strength of both hands was calculated by grip dynamometer. The mean value of ergonomic parameters were found more in weeding operation which were as follows : -Postural deviation (250), Average heart rate (5.35), energy expenditure (5.70), physical cost of work (3.05), total cardiac cost of work (35.82). After weeding operation farm women perceived very severe pain in lower back, buttocks, and palms, while after winnowing they experienced very severe pain in shoulder, upper back and upper arms.

ABSTRACT

Identification and mapping of fractures/lineaments and hydrogeomorphic units is prerequisite for undertaking ground water exploration and development in any terrain. Remote sensing and GIS techniques have been used for ground water potential mapping in Theni District. The study area has been divided into various geomorphic units based on visual interpretation of LISS III and PAN merged data in false colour composite on 1:50,000 scale. Ground water potential of each of the geomorphic units was assessed and correlated with geology, structure and recharge factors prevailing in the Theni District.

Introduction

Agricultural production in India is constrained by number of biotic and abiotic factors. India is a tropical country and has a climate which is conducive for insect pests which are, one of the major constraints in agricultural production, processing and storage. Annual crop losses due to insect pests and diseases in India are estimated to be 18 percent of the agricultural output. Insect pests are widespread in all the agroclimatic zones and large quantities of insecticides are used to control these pests. Indiscriminate use of insecticides, lack of adequate knowledge on proper application techniques and dosages, and frequent use of broad spectrum insecticides are common in India. There is a need to identify suitable alternative methods for the management of insect pests and among them, biological control using viruses, bacteria, fungi and entomopathogenic nematodes is gaining greater attention world over.

Nematode families of Steinernematidae and Heterorhabditidae attracted most attention as they contain the entomopathogenic nematodes (EPN). Entomopathogenic nematodes are obligate parasites of insects that kill their hosts with the aid of bacteria (Xenorhabdus and Photorhabdus) carried in the nematode’s alimentary canal. The lethal obligate insect parasites are ubiquitously distributed without pathogenicity to mammals and beneficial non-target insects, and exempted from registration requirements. Currently there are about 98 valid EPN species belonging to Steinernema (79) and Heterorhabditis (19). Soil surveys conducted in divergent areas of Indian subcontinent have demonstrated high diversity of EPN across seasons, habitats, and geographic regions. There are several target pests in India that can be controlled with entomopathogenic nematodes and several workers have used EPN against cutworms, stem borer, white grubs, etc. under laboratory and field conditions and are compatible with existing IPM programmes.

Integrated disease management (IDM) needs competence in three broad areas
I. Prevention
II. Monitoring
III. Intervention

1. Introduction

The status of mechanization in India is at a very low level for horticultural crops. The farmers usually go behind the use of traditional methods for different farm operations (Fig 1) and practices for cultivation of horticultural crops, their handling, storage, and processing. This results in less yields, high cost of cultivation and high crop losses from harvesting till processing. The use of different available hand tools, machinery and hi-tech technologies in the production and processing of the crops will lead to increased yields and decrease in losses to a great extent (Mandhar, 1999).

Acaricides: Acaricides are agents that kill members of class Arachnida like ticks and mites.

Acaricides are used both in medicine and agriculture, although the desired selective toxicity differs between the two fields.

What is acaricide resistance?

The ability of a parasite strain to survive and/or to multiply despite the administration and absorption of a drug given in doses equal to or higher than those usually recommended but within the limits of tolerance of the subject.

How does resistance develop?

• Animals are treated with the chemical (Acaricide), exposing nearly all of the tick population to the toxin.

• Susceptible individuals are killed, and those rare individuals that have some genetic resistance, survive.

• They reproduce, and pass along those “resistance genes” to the general tick population.

Introduction

Climate change, a global phenomenon of present time, has emerged as the greatest challenge of the world in the twenty-first century. Rising earth’s surface temperature is one of the most threatening factors coming into view. The substantial changes in the earth’s climate have an impact on ecosystems, economics and societies in a variety of ways (Sharma et al., 2024). It is one of the important environmental, agricultural, human and animal health issue. Climate change is an association of multidimensional effects involving physical characteristics, causes and consequences (Visschers, 2018). The climate change has resulted in to increasing global average temperature of air and ocean, melting of snow, rising of ocean level, change in the rainfall pattern and extreme whether events such as drought, flood, heat waves, storms etc.