eChapters

Learning outcomes

• You should know how to make an audio or video script.
• Describe the differences between the different kinds of programmes.
• Examine the different script development stages. Before we start, please complete the following activity.

Reflect on the programmes you watch on TV or any other programme using Over the top (OTT) platforms like amazon, prime video, Netflix etc. How many of it you classify as

1. Entertainment
2. Educational
3. Informational

The collected insect samples can be inspected in the laboratory after detaching the antenna and putting them under the microscope. They can also be studied through the permanent slides of different types of antennae with the help of microscope.

Antennae are mobile sensory segmented appendages of the head. They articulate with head in front or between the eyes and arise from antennal socket. The size and shape of antennae varies in different insects. They are used for sensory perception which includes motion and orientation, odor, sound, humidity, and a variety of chemical cues. The Sensilla on the antenna acts as tactile, olfaction, carbon dioxide, temperature, wind, humidity, and sound receptors.

Structure of Antenna: Antennae consist of three parts

Metamorphosis and immature stages

The change in growth and development (form) of an insect during its life cycle from birth to maturity is called metamorphosis. There are four basic types of metamorphosis in insects.

Ametabola: (No metamorphosis) e.g. Silver fish.

These insects have only 3 stages in their life cycle namely egg, young ones and adults. It is most primitive type metamorphosis. The hatching insects resemble the adult in all respects except for the size and called as juveniles. Moulting continues throughout the life.

Hemi-metabola: (Incomplete metamorphosis) e.g. Dragonfly, damselfly and may fly.

These insects also have 3 stages in their life namely egg, young ones and adults. The young ones are aquatic and are called naiads. They are different from adults in habits and habitat. They breathe by means of tracheal gills. In dragonfly naiad, the lower lip (labium) is called mask which is hinged and provided with hooks for capturing prey. After final moult, the insects have fully developed wings suited for aerial life

The complete system of veins of a wing is termed venation or neuration. Generally in all the insects, there is some similarity in wing venation and therefore, it is presumed that all types of wing venation have developed from the common base or the same ancestor. Using an extensive study of wing venation in different groups of insects, Comstock and Needham constructed a hypothetical type of wing venation from which all other types have presumably been derived. According to them the primitive wing venation has developed from two tracheae which are situated on the anterior and the posterior basal margins of wings and their branches are spread all over the wing.

Materials Required

Fruits/ vegetables, washing tanks/ containers, size grader, fruit waxes, packaging material, neem based fungicides etc. 

Procedure

    1.    Take available fruits or vegetables 
    2.    Wash them in plain water or chemical solution as told by the teacher
    3.    Shade dry the fruits / vegetables
    4.    Prepare suitable wax solution
    5.    Apply wax on to the fruits as told
    6.    Record the fruit weight before packing
    7.    Pack the fruits properly in the trays / boxes depending upon the type and purpose
    8.    Do curing if required 
    9.    Do pre-packaging, if desired
    10.    Label the package for desired information
    11.    Keep the fruits for storage
    12.    Record the observations pertaining to weight loss and rotting periodically depending upon the commodity and its shelf life.

The National Food Security Bill, 2011 designed to make access to food a legal right, is the last chance to convert Gandhiji’s vision of a hunger-free India into reality.

Mahatma Gandhi’s articulation of the role of food in a human being’s life in his speech at Noakhali, now in Bangladesh, in 1946 is the most powerful expression of the importance of making access to food a basic human right.  Gandhiji also wanted that the pathway to ending hunger should be opportunities for everyone to earn their daily bread, since the process of ending hunger should not lead to the erosion of human dignity.  Unfortunately, this message was forgotten after the country became independent in 1947, and government departments started referring to those being provided some form of social support as “beneficiaries”.  The designation “beneficiary” is also being applied to the women and men who toil for 8 hours in sun and rain under the Mahatma Gandhi National Rural Employment Guarantee Programme (MGNREGA).  Sixty-five years after Gandhiji’s Noakhali speech, we find that India is the home for the largest number of under- and malnourished children, women and men in the world.  There are more persons going to bed partially hungry now, than the entire population of India in 1947.

Date:

Objective: To understand basics of photography and practice taking good quality photographs.

Overview: Photograph refers to any image which is created when light falls on a photosensitive surface. With the advent of mobile phones and decreasing cost of technology, many people are taking up photography as a hobby or profession. Photographs are very useful in communication, extension and education, as they arouse interest, simplify complex ideas/ things, can be used to convey messages to illiterate people, and enhance credibility of the information. Apart from technical expertise, it is important to know the basics of composition to take good photographs.

Date:

Objective: To understand communication process and its elements.

Description: Communication is the process by which a person shares knowledge, feelings, ideas, and information, etc. with another person(s) in such a way that each gains a common understanding about the meaning and intent of the message. Major functions of communication include sharing information, issuing instructions, persuasion and motivation. There are several elements in communication process. Anyone who takes the initiative and starts the communication process is called the source or communicator. The intended recipient of the communication content is called as the receiver. Any sign or symbol which has the same meaning for the source and the receiver is called is the message. Receiver is the intended recipient of the message and what the communicator hopes to accomplish is the objective of communication process.

Date:

Objective: To understand gap in communication process.

Description: Communication is never 100 percent efficient. In other words, even an ideal situation does not lead to complete and full understanding between the sender and receiver. Often, the receiver may understand the message differently or receive only a part of the message. This happens as every individual has a different frame of reference. Frame of reference is the set of experiences, beliefs and values which influence a person’s behaviour and acts as a benchmark against which all new stimuli are interpreted. Based on the frame of reference, every individual develops a perception. Perception is the process of receiving and interpreting stimuli.

Date:

Objective: To understand shot sizes in a video production.

Overview: Shot, in video production refers to one continuous recording by the camera. It comprises of a series of frames (still images) and There are 24 frames in one second. A shot includes eeverything recorded between switching on and switching off the record button on the camera. It can contain movement of both camera and talent.

Date:

Objective: To understand the characteristics and limitations of language.

Description: Language is the structured system of symbols, which are called as words. Semantics refers to the study of the relationship between symbols and their meaning. All languages are arbitrary as the word symbol is not the thing it represents (i.e. if all of us agree, we can refer to a “cat” as “donkey”, without turning it into one!). Words can be both abstract (things that cannot be sensed directly) and concrete (things that can be experienced through sensory organs).

Date:

Objective:To understand the concept of perception and its role in communication.

Description: Human body receives stimuli through various sensory organs and the brain processes these stimuli and assigns meanings leading to a reaction. This process of organizing, identifying and interpreting of sensory stimuli leading to an understanding of the environment is called perception.

Date:

Objective: To understand the importance of paralanguage in verbal communication.

Description: Paralanguage is the variation in voice and includes vocal characteristics such as pitch, range, resonance, tempo, etc. Though it is an integral part of verbal communication, it is quite distinct from the actual signs and symbols that are used by the communicator.

Date:

Objective: To understand the significance of non-verbal communication.

Description: Non verbal communication refers to communication without the use of words. It can encompass a wide range of communication behaviour from body language to choice and use of architectural objects. It is used for repeating, substituting, complementing, regulating verbal messages and deceiving. Some of the common non verbal means of communication include: Gestures: Gestures are movement of body parts and kinesics refers to the study of body movement.

Date:

Objective: To visit a newspaper organization to understand its structure and functions.

Description: A newspaper is a periodic publication containing written information about current events and other information that is of interest to the readers. A newspaper organization usually consists of the following departments:

a) Editorial department: The editorial department collects, processes and finalizes all content and images that are published in the newspaper. News/ information collected by the journalist or contributed by various writers is made readable, presentable and attractive to the readers through editing and proof reading by the editorial team.

Date:

Objective: To visit a video production facility to understand the process and set up.

Overview: Video programs are often produced in a studio environment as it is convenient, easy to manage and there are very few disruptions. A typical video production facility comprises of two areas – control room and the studio floor. Director, assistant director, video and audio technicians sit in the control room. The control room has a series of monitors that display the final and camera outputs. It may also have “on air” and “preview” monitors which display images being broadcast and to check the image before recording, respectively. The control room also has a production console, which is used to select the video and audio output.

Learning outcomes

• To understand national and international NGOs and their functioning.
• NGO types and rules governing them.

Non-governmental organisations (NGOs), as the name suggests, are free from the government in its functioning. NGOs are groups or organisations of voluntary persons who do not represent any government action, and their members and associated persons manage all the functions. These numbers work as per the rules and regulations prescribed by the government, but they are independent of governmental control.

Learning outcomes

• understand the functioning of community radio in dissemination of from technology.

Introduction

Radio is the oldest type of media, and via radio the information revolution saw the green revolution. Farmers listen to the radio for weather, market price, and pestilence updates. Government began to encourage citizens by establishing radio rural forums (RRF). The primary purpose of a rural radio forum is to discuss and act. Here, a group of twenty individuals debate cultivation-related concerns and provide questions for the subsequent Radio rural forum. This allowed radio forum to get widespread popularity.

Learning Objectives

1. To raise awareness of a community problem and support its solution.
2. Induce the emotional participation of the community at the local level and establish a positive psychological climate for new activities.

The various methods of data gathering involve the use of appropriate recording forms. These are called tools or instruments of data collection; they consist of an observation schedule or interview guide, an interview schedule, a questionnaire, etc.

Date:

Objective: To write a radio script for infotainment program.

Overview: Radio is an electronic audio medium that can broadcast messages to a large number of dispersed audience. Radio has several advantages as a medium of communication, especially in rural areas:

a) Radio can be carried around.

b) Low cost of production and ownership.

c) Usage is not limited by literacy and technical know-how.

d) It can be used by the listener while doing other tasks.

e) Usage is not limited by power supply.

f) Easy to operate.

Date:

Objective: To write a script for a short video production.

Overview: A script is a written document that contains description of the setting, characters, dialogue, and stage directions for an audio-visual production. It is used to communicate information about actors, costumes, sets, and other aspects of production to those who will be involved in program production. While screenplay tells a story, a script (especially shooting script) mainly helps in production. Another difference between a screenplay and a script is that the former conveys what the audience will see on the screen, whereas the script guides the production team. A storyboard refers to pictorial representation of shots in a sequential order. It is very handy during shooting short videos like commercial or public service messages.

Date:

Objective: To write an article for a farm publication.

Description: Print media can be used at the receivers’ convenience and can be preserved for future reference. It can also be used to reach the readers at a relatively low cost and the information can be verified by the reader. Due to these advantages, print media is an important form of communication, especially for development purpose. The term “farm publication” is used to refer to any publication that is prepared by an extension agency/ development department and contains information related to improvement of farming practices. Farm publications can be of various types such as leaflet, folder, magazine, newsletter, etc. Farm publications are very useful for literate farmers and can also be used by illiterate farmers with the help of others.

The toaster is a kind of equipment used to toast bread in order to make it crisp. It has two slots which can hold two or four slices of bread. The electrical element produces the heat needed to make the bread hot and crisp. The toaster is a little apparatus intended to toast numerous sorts of bread items. Created in Scotland in 1893 and persistently created from that point forward, the most well-known family unit toasting machines are presently the pop-up toaster and the toaster broiler. Pop-up toasters make toast from bread in 1 to 3 minutes by utilizing warmth components.

Introduction
 
In India, most of the agricultural soils are deficient in one or more of the essential plant nutrients required for raising healthy crops and harvesting potential yield. Acidity, alkalinity, salinity, anthropogenic processes, nature of farming, and erosion are the main factors that can lead to soil degradation either alone or in combination of more than one factors.

Immunity is defined as the resistance to infection. This is carried out by the process of identification and removal of non-self material. In contrast to this, our body has to maintain immune tolerance to our own cells and tissues and develop the ability to distinguish these self-antigensfrom non-self (foreign) antigens. Tolerance means unresponsiveness of the immune system to an antigen. Immune tolerance is the process by which the immune system does not destroy an antigen. Tolerance can be either natural or induced.

Tomato is one of the most popular and widely grown nutritious vegetable in the world. Tomato (Lycopersicum esculentum Linnacus Karst.) belonging to the family Solanaceae is one of the most nutritious and remunerative vegetable crop. It is the world’s important vegetable next to potato. The crop is cultivated throughout the year. In Northern plains, the crop is cultivated during autumn, spring and summer. In South India, the crop is grown in June – July, October – November and January – February. The optimum season for seed production in southern India is October – December. Nursery raised in late October and transplanted in the first week of December will produce a good seed crop.

14.1. Introduction

Tomato is grown in India in abundance both in summer and winters. Tomato though botanically a fruit is generally considered as vegetable because of the way in which it is consumed. Fresh tomatoes are very refreshing and appetizing but can not be stored for a long period. During peak season, about 25% of the produce is spoiled due to mishandling and such losses can be avoided by converting tomatoes into different value added products. Tomato can be processed into pulp, paste, puree, juice, ketchup and sauce. In India, tomato sauce and ketchup are very popular. High quality products can be prepared from tomatoes by:

1. Using uniformly ripened, red coloured tomatoes.

2. Avoid prolonged heating and cool the product immediately after cooking.

3. Avoid using iron and copper equipments and utensils at any stage of processing.

A. Tomato and Tomato Products
Tomato though botanically a fruit is generally considered a vegetable because of how it is consumed. Commercial products from tomatoes include juice, puree, paste, ketchup, soup canned and dehydrated tomatoes. Processing of tomato is now practised from home scale level to large scale enterprise. As a semi-finished product, tomato puree is prepared on a small scale while at a large scale, tomato paste has gained commercial significance. Both puree and paste are used for the preparation of different finished products like ketchup, juice, soup etc. The method for preparation of these products is well standardized, however, some modifications concerning recipes are made in the processing plants owing to variations in the quality of the raw material. The methods for the preparation of different tomato products are discussed as under: -
I. Tomato Juice/Pulp
Tomato juice is an unconcentrated product consisting of a liquid with a substantial portion of the pulp, expressed from ripe tomatoes with or without the application of heat and the addition of salt. Tomato pulp/juice is the basic ingredient for the preparation of different tomato-based products such as tomato puree, paste, ketchup etc. Fully ripe tomatoes are used for the preparation of tomato juice/pulp. All green, blemished and overripe fruits should be rejected as they adversely affect the quality of the product. The juice obtained from overripe tomatoes is usually thin and unpleasant. The juice should be deep red in colour with a characteristic taste and flavour. The juice shall have about 0.4% acidity expressed as citric acid. Cane sugar (1%) is added to further improve the taste and flavour of the finished product.

Ingredient of tomato chutney: Tomato 1kg, sugar 500g, salt 25g, onion chopped 100g, ginger chopped 10g, garlic chopped 5g, red chilli powder 10g, cinnamon, cardamom large, aniseed, cumin, black pepper powder 10g each, vinegar 100ml and sodium benzoate 0.50g/kg final product.

1. Damping off
Diagnostic Symptoms
• Disease occurs in two stages, i.e. the pre-emergence and the postemergence phase.
• In the pre-emergence phase, the seedlings are killed just before they reach the soil surface.
• The young radical and the plumule are killed and there is complete rotting of the seedlings.
• The post-emergence phase is characterized by the infection of the young, juvenile tissues of the collar at the ground level.
• The infected tissues become soft and water soaked. The seedlings topple over or collapse (Fig.1)
Etiology
• Pathogen; Pythium aphanidermatum.
• The fungus has a characteristic mycelium, which coenocytic, hyaline, freely branching and thick hyphae.
• It reproduces both asexually and sexually.

50.1. Aim

To prepare products from tomato fruits.

50.2. Theory

Commercial products from tomatoes include juice, puree and paste. Processing of tomato is now practiced from home scale level to a large scale enterprise. As a semi finished product, tomato puree is prepared on a small scale while at large scale tomato paste has gained commercial significance. Both puree and paste are used for preparation of different finished products like ketchup, juice, soup etc. The method for preparation of these products are well standardized, however, some modification with respect to recipes are made in the processing plants owing to variation in the quality of the raw material. The method for preparation and recipe of different tomato products are as under:

50.3. Raw material, ingredients and utensils required

1. Tomatoes.

2. Stainless steel knives, utensils, juicer, pulper, glass bottles, corking machine, crown corks, muslin cloth, boiler/gas bhatti, etc.

51.1. Aim

To prepare products from tomato fruits.

51.2. Theory

Commercial products from tomatoes include ketchup, soup, cocktail, chutney, canned and dehydrated tomatoes. Processing of tomato is now practiced from home scale level to a large scale enterprise. Both puree and paste are used for preparation of different finished products like ketchup, canned and dehydrated products, soup etc. The method for preparation of these products are well standardized, however, some modification with respect to recipes are made in the processing plants owing to variation in the quality of the raw material. The method for preparation and recipe of different tomato products are as under:

51.3. Raw material, ingredients and utensils required

1. Tomatoes, sugar, salt, sodium benzoate etc.

2. Stainless steel knives, utensils, juicer, pulper, glass bottles, corking machine, crown corks, muslin cloth, boiler/gas bhatti, etc.

Essentials for Quality Product Preparation

Plant ripened red tomatoes should be selected. Yellow and green fruits on processing yield dull colour and turn brown due to oxidation.

Never use iron equipment for processing. Lycopene oxidizes and turns brown when comes in contact with iron. It also forms black compounds with the tannins present in tomatoes or the spices which are used for product preparation.

Avoid prolonged heating and cool immediately to avoid over-cooking.

Sauce/Ketchup:-Fully ripe red fruits are selected, all green and blemish part are discarded. It is made from strained tomato juice or pulp and spices, salt, sugar and vinegar with or without onion and garlic and contains not less than 12% tomato solid and 25% total solid.

Ingredient of tomato sauce/ketchup: Tomato pulp 1kg, sugar 75g, salt 10g, onion chopped 50g, ginger chopped 10g, garlic chopped 5g, red chilli powder 5g, cinnamon, cardamom large, aniseed, cumin, black pepper powder 10g each, clove headless 5 number, vinegar 25ml or glacial acetic acid 5ml and sodium benzoate 0.25g/kg final product.

I. FILL UPS

1. Tomato is a _____ pollinated crop.
2. _____ pigment is responsible for red colour of tomato.
3. Seed rate recommended for tomato is _____.
4. Isolation distance recommended for foundation seeds of tomato is _____.
5. Spacing adopted for tomato is _____.

Fruit borer: Helicoverpa armigera: Noctuidae

This is a medium sized moth yellowish brown in colour with a wing

span of about 3 cm and a body length up to 1.4 cm. There is a dark speck and a dark area on the outer margin of each forewing. The forewings also have greyish wavy lines and black spots of different sizes on the upper side.

Tomato is relatively recent addition to the world’s vegetable crops. Now became one of the most important vegetable crops and is popular & widely consumed. It is being grown extensively in USA, China, India, France, Israel and Netherland.
 
It is used in fresh and processed form. Among the vegetables maximum attempts have been made to improve this crop because of its short duration, easy cultivation and large number of seeds per fruit and this has made it an ideal crop for many research works. An exclusive Tomato Genetics Co-operative located in University of California, USA, published genetic information on the crop and maintains a large number of     collections which have already been thoroughly catalogued.
 
Origin and Distribution: Native of Peru in South America and spread to North America by migrating birds. Largest number of wild tomato forms is present in Mexico. Spanish Priests introduced it to Europe in around 1550. In Europe it is known as Poma amoris = Amorous apple (Love apple). Wild relatives found in narrow elongated mountainous regions of Andes in Peru, Ecuador and Bolivia and Galapagos islands. Domestication and cultivation of tomato appears to have first occurred outside its centre or origin. Domestication of tomato was first done by Mexican people i.e. Red Indians, which is considered as secondary center of origin. Now cultivated tomato is common in Peru but recently added to their diet.

Tomato (Lycopersicum esculentum Miller, 2n = 2x = 24, also known as Solanum lycopersicum, Family Solanaceae) has been the leading vegetable crop globally. Tomato genome is composed of approximately 950 Mb of DNA, more than 75% of which is heterochromatin and largely devoid of genes. The global production of tomato in 2017 has been 182 million tons from 5 million ha area giving a productivity of 36.4 tons/ha. Top 10 countries in tomato production in descending order are China, India, Turkey, USA, Egypt, Iran, Italy, Spain, Mexico and Brazil. Tomato is planted almost throughout the year in different parts of India in an area of 8 lakh ha (0. 8 million ha) with production of 20.8 million tons giving a productivity of 26 ton/ha. Tomato area in India is almost 10% of total vegetable area. The states accounting for major tomato production in India are Andhra Pradesh, Orissa, Telangana, Madhya Pradesh, Karnataka, Maharashtra, West Bengal, Chhattisgarh, Bihar, Gujarat, and Himachal Pradesh.

Out of total area, about 78% is planted with F₁ hybrid seed while remaining 22% of the area still goes to open-pollinated varieties. The average productivity of tomato close to 26 tons/ha is still very low compared with the global productivity of 36.4 tons/ha. However, with the introduction of high performing and disease resistant hybrids, the productivity and production are continuously improving. Most of hybrid tomato seed (95 tons) is sold by the private seed companies. There are more than 375 tomato hybrids in the commercial chain in India produced and marketed by different companies. About 50 hybrids out of these 375 hybrids are being grown on more than 80% of the area under tomato in India. Leading companies in tomato hybrid seed segment are Seminis (Bayer), Syngenta, Rasi HyVeg, and Namdhari (NHB, 2015; Kapur, 2016).

Tomato (Solanum lycopersicum L.) is one of the most commercially important vegetable crops globally, with a significant demand for high-yielding hybrids and improved open-pollinated varieties. Efficient seed production methodologies play a crucial role in ensuring the availability of genetically pure and high-quality seeds for commercial cultivation. Traditional hand emasculation and pollination remain widely used despite being labor intensive, given their economic feasibility due to high seed yield per fruit. Hybrid seed production is further refined through mechanized pollen collection and controlled pollination techniques, enhancing efficiency. Seed quality management, including rigorous isolation protocols, field inspections, and breeder and foundation seed production standards, ensures genetic purity and viability. Advances in molecular breeding and the application of marker-assisted selection (MAS) have enhanced the efficiency of parental line development and hybrid seed production. This chapter provides an in-depth review of tomato seed production methodologies, covering botanical characteristics, genetic resources, and breeding objectives aimed at improving disease resistance, abiotic stress tolerance, and fruit quality traits. It further discusses varietal advancements in the public and private sectors, highlighting elite hybrids and open-pollinated cultivars tailored for different agro-climatic conditions. Additionally, the package of practices for seed production in tomato underscores the importance of isolation, field inspections, seed extraction methods, processing techniques, and quality assurance standards to maintain genetic purity and seed viability.

Origin, domestication and adaptation in India
Tomato was classified under Lycopersicon for several years although, initially Linnaeus (1753) classified it in the genus Solanum. Recently, molecular studies provided new data on the relationships of tomato-potato and based on these results, tomato has been again assigned to the genus Solanum. Solanum section Lycopersicon includes the cultivated tomato (Solanum lycopersicum) and its wild relatives, Solanum lycopersicum being the only domesticated species. The wild cherry tomato, Solanum lycopersicum var cerasiforme, the ancestor of the modern cultivated tomato has been originated in Peru-Ecuador-Bolivia region of the Andes. The Veracruz-Puebla region of Mexico is the centre of domestication of the cultivated tomato. From Mexico, tomato was taken to Italy, Spain, Portugal and other European countries, Africa and Middle East by the explorers in the 16th century. It was taken to Philippines after its discovery by Magellan in 1521, and from there it was taken to other Asian countries. Tomatoes did not have an easy passage even in Europe. The fruit got tagged as the “poison apple” in Britain, France, Spain and other European countries. Tomato moved to the USA from northern Europe around 1781 where it was first grown by Thomas Jefferson in Virginia.

At the back of the mouth on each side there are two small lymphoid organs known as tonsils. Normally they are about the size of a Lima bean, but they can become very larger if severely infected. The lingual tonsil is located at the back of the tongue close to other tonsils. There are two more lymphoid masses of tissue behind the soft palate known as adenoids. They make protective ring at the back of the nose & throat to keep infection from spreading throughout the body. Most of the germs enter through the mouth, nose and throat.

After becoming an adult the adenoids have largely disappeared. In childhood both the tonsils and adenoids may become very large. It makes swallowing painful and breathing difficult. In childhood large tonsils are common. The main reason of infection is due to certain types of streptococcus germs. Mouth breathing, nasal speech, a chronic cough are caused by the enlarged adenoids. The patient may also have halitosis or bad breath.

Introduction

The nursery is an area where tender seedlings are raised and conditioned before planting out in transplant beds or directly in the field. The increasing demand for quality planting material has up stepped the nursery business in many countries. The sophisticated technology, research and novel production approaches has transformed the traditional horticultural nursery to a technology intensive business. The tools and accessories associated with nursery production helps in aiding productivity of the nursery. The colour-coded and labelled plant materials, textured pots etc. are fascinating to consumers, indirectly increasing the salability of the plants and profitability of the enterprise. 

Introduction

Challenges in agriculture and natural resource management in the past have prompted changes in agricultural education, research, and extension globally. The sustainable development of agriculture in a country largely depends on the effectiveness of its agricultural extension strategies, encompassing approaches, service delivery, methodology, and processes. The desired outcome of agricultural development is farmers’ outcomes, achievable through engagement, learning, and participation in research and extension processes. Agricultural extension played a significant role in the green revolution by providing farming communities with appropriate technologies and optimal cropping practices. This helped countries transition from being food deficit to food exporting (Ratnakar, 2016). Additionally, extension services play a crucial role in expanding knowledge, skills, and attitudes about the management of socio-economic-agricultural practices by understanding the existing techno political ecosystem and exploring a basket of technology alternatives for making informed decisions.

The major tuber crops cultivated in tropical countries are: cassava (Manihot esculenta Crantz), sweet potato (Ipomoea batatas L.), yams (Dioscorea sp.), aroids (Amorphophallus, Alocasia, Xanthosoma, Colocasia ), Canna edulis, arrowroot, Chinese potato, winged bean and yam bean. In addition to this, there are a number of under exploited and under utilized tuber crops grown as wild cultivars having medicinal and pharmaceutical applications. Processing and utilization of tuber crops as food are traditional with both primitive as well as modern equipments being in use (Nanda and Kurup, 1994). One of the oldest traditional processing tools is a stone pounder for making poi from taro in Hawaii.

For maintenance of garden, a person should well acquainted with different types of tools and implements and their uses. A tool and implement is any physical item that can be used to achieve a goal, describe a procedure or process with a specific purpose. Tools that are used in particular fields or activities may have different designations such as instrument, utensil, implement, machine or apparatus. The set of tools needed to achieve a goal is called equipment. The knowledge of constructing, obtaining and using tools is technology. Varieties of implements and tools are required for carrying out the various garden operations like digging, breaking soil, clods, removal of weeds, levelling of ground, mowing lawns, planting of bulbs, layering and grafting, manuring etc. Some of the gardening hand tools are spades, garden forks, pitchfork, hoes, ploughs, shovels, pruners and ice choppers. Many hand tools have been replaced by electronic tools but gardening and landscaping hand tools are still preferred, because they are easier to use and cheaper. Garden tools can be made up of wood, metal or plastics. Landscaping and Gardening is one of the most rewarding and stress-relieving hobbies. The most common garden tool set includes: shovels, rakes, spades, diggers, trowels, etc. Gardening tools can be power or hand driven. There are some garden tools commonly used (Table 1).

Sickle: Used for cutting grass, fodder and harvesting crop. Sickle made of steel is better and lasts longer.

In dryland areas, moisture conservation accounts prime most important concept for maximizing productivity of dryland crops. Varied topographic and agro- climatic conditions ranging from arid to semi-arid climates with high evaporation because of varied temperature regimes permit the cultivation of drought resistance crops. Reducing the cost of cultivation without compromising the socio-economic status of farmers is prime importance. Conservation of moisture by reducing the weed menace is great task performed by the dryland farmers. Under such situations, effective utilization of dryland tools and implements used are of a primitive nature throughout the dryland farmers for higher factor productivity. Traditional farm tools and implements for self-sustenance have been adapted through experience over generations to meet emerging socio- economic and farming challenges.

Relatively small yields consequently larger areas must be farmed for a given return and the successful exploration of dryfarming requires the adoption of methods. The methods which enable farmers to do the maximum effective work with the smallest expenditure of energy. The type of soils and topographic conditions largely influence the type, size and shape of particular tillage tools/ implements among the dryland farmers. The following is a list of local tools/ implements found in the various dryland regions.

Introduction

The capabilities and effort to collect the geographic data has increased dramatically in the last decade to cope up with the increasing demand for the support of decision making and planning process in the state, national and global level.  From the Government sector, there is a need for spatial data to make quick responses to natural disasters, industrial accidents and environmental crises as actions will be decided based on geography. There is constant pressure to make wise decisions in a more time and cost effective and efficient manner. Accurate and current geospatial data are critical to these decisions.