eChapters

When a variety is grown under different environmental conditions, phenotype is the result of genotype+environment+genotype×environment interaction. Genotype×environment refers to the interaction effect of the genotype with different environments. Presence of this interaction leads to overestimation of genetical and biometrical parameters and thus may yield misleading results. This interaction also influences the varietal adaptation of new improved genotypes. Adaptation refers to certain varietal features (morphological and physiological) which promote survival under that environment. In production and breeding programmes adaptability is related to economic yield i.e. genotypes producing higher economic yield under different environmental conditions are comparatively more adaptive than those which produce low yield. Varietal adaptability refers to the capability of a genotype to grow normally and perform well in an environment or different environments. Adaptation of genotypes depends upon certain characters i.e. both morphological and physiological which promote survival under an environment. In natural conditions adaptation is brought by natural selection, but in artificial breeding, adaptation is induced by the breeders.

Introduction

DNA sequencing is the process of determining the nucleotide order of a given DNA fragment. The most commonly used sequencing method is the dideoxy method. This method uses dideoxynucleotide triphosphates (ddNTPs) which have an H on the 3’ carbon of the ribose sugar instead of the normal OH found in deoxynucleotide triphosphates (dNTPs). Dideoxynucleotides are chain terminators. In a synthesis reaction, if a dideoxynucleotide is added instead of the normal deoxynucleotide, the synthesis stops at that point because the 3’OH necessary for the addition of the next nucleotide is absent (Sanger et al., 1977).

Q. 1 Operating speed of power sprayer varies from
(A) 2 - 5 km /hr          (B) 4.8 - 8 km /hr
(C) 10 - 20 km /hr      (D) 20 - 35 km /hr

HCI is the study of how people interact with computers, especially as it relates to technology design. User-centered design, UI and UX are combined with HCI to provide intuitive technology and products.

Human-computer interaction (HCI) is the field of study that focuses on optimizing how users and computers interact by designing interactive computer interfaces that satisfy users' needs. It is a multidisciplinary subject covering computer science, behavioral sciences, cognitive science, ergonomics, psychology, and design principles. HCI focuses on designing, implementing and evaluating interactive interfaces that enhance user experience using computing devices.

Clinical Symptoms

• Gasping for air

• Discoloured gills with trapped materials

• Swollen gills with enhanced mucous secretion

• White to grey spots on the gills

• Diseased fish gather near the outlet of the pond

• Fish become lethargic and remain on the surface waters

Causative Agent: Flavobacterium branchiophilum, Cytophaga spp., Flexibacter spp.

Host (Common sp.)

• Goldfish • Koi carp

• Cichlids • Fighter fish

• Gourami fish

1. Introduction

The library, often perceived as a tranquil oasis, can be a hotbed of emotions. Behind the scenes, library employees and patrons alike struggle to manage their emotions, and anger can be a particularly pervasive and destructive force. The pressure to meet deadlines, the stress of dealing with difficult patrons, and the frustration of working with outdated technology can all contribute to a simmering sense of anger and resentment. But anger is not just a personal problem, it can have far-reaching consequences for the library as a whole. Unchecked anger can lead to decreased productivity, strained relationships, and even violence. It can also create a toxic work environment, driving away talented employees and eroding the trust of the community. Despite the importance of anger management, it is often overlooked in library training and professional development. Library employees are frequently expected to manage their emotions without being given the tools or support to do so. This can lead to a culture of silence, where employees suffer in silence, afraid to speak out about their struggles with anger.

Tumour in Domestic Animals
Tumours in domestic animals, much like in humans, can occur in various tissues and organs. These can range from benign growths (non-cancerous) to malignant tumors or cancerous. Their causes, types, diagnosis, and treatments depend on the animal species, breed, age, and environmental factors. Common tumours in dogs are mammary tumours, skin tumours, lymphoma, osteosarcoma and hemangiosarcoma. In cats lymphoma, squamous cell carcinoma, mammary tumors and fibrosarcomas are reported. In cattle, squamous cell carcinoma, lymphosarcoma and papilloma are common. In horses, sarcoids, melanomas and squamous cell carcinoma are common. In small ruminants (sheep and goats) lymphoma and skin tumours are reported. In pigs, lymphoma and melanomas are commonly reported. Diagnosis of cancers are done by physical examination, cytology, biopsy, imaging: X-rays, ultrasound, CT, MRI and blood Tests.

INTRODUCTION

The discipline of Agrometeorology, an applied science is less than fifty years old. Its services are operationally used by individual farmers in developed countries, and by agricultural or development services in more than half of the countries of the world. Its contribution to agricultural production by examining forecast is sought in virtually all countries. In many countries, the respective governments have expressed the desire to use meteorological information to a much larger extent in day-to-day farm planning and operations. The climate database is used for the development of practical criteria in planning and management of irrigated and rainfed crop production system (Martin Smith, 2000).

Though a huge set of Agromet data exists in India, its utility has not been effective due to the scattered location of these data sources and the impediments for free flow of data to the users to analyze and interpret for real-time decision making in agriculture. There is also a considerable time lag between the actual observation and data availability. In view of the importance and the immediate exigency to centralize the database system for helping the researchers and planners, a central agrometeorological databank facility funded by DST from 1998 to 2003 and later by ICAR with the following objectives was established at Central Research Institute for Dryland Agriculture (ICAR), Hyderabad.

Protected cultivation of vegetable crops refers to creation of favourable environmental conditions around vegetable plants, offsetting or minimizing the detrimental effects of prevailing or expected to prevail abiotic and biotic factors. In open fields, vegetables face several abiotic and biotic stresses, resulting in lower or poor or no yield. This condition is altered by using different protected structures for cultivation and/or nursery production. Vegetables which are transplanted using seedlings should be produced by raising seedlings under protected conditions. Protected conditions ensure production of healthy seedlings. The use of healthy seedlings ensures better and higher production of vegetables both under protected conditions and open field conditions. Nursery grown in nursery trays can be transported long distances and can wait till field is ready or human resources is available for transplanting. Structures are ideal for production of plug plants/transplants in different sizes of portable trays.

Need for climate-smart agriculture strategy

Climate change has long-lasting and potentially detrimental consequences on the agriculture sector. Changes in weather events cause perturbations across agricultural ecosystems and have impact on farm productivity. Adopting the climate-smart agriculture approach has thus, become inevitable in order to build resilience in agriculture systems and cope up with climate change. With a view to implementing climate-smart agricultural practices to ensure climate resilience, certain broad strategies have to be adopted. The CSA approach is designed to identify and operationalize sustainable agricultural development within the explicit parameters of climate change (Climate Smart Agriculture Sourcebook.FAO.2013). It integrates the three dimensions of sustainable development (economic, social and environmental) by jointly addressing food security and climate challenges.

8.1 Introduction

Giving people and companies access to basic financial services is known as f inancial inclusion, and it has long been a problem on a global scale. Millions of people worldwide still lack access to basic banking services like savings accounts, loans, and insurance and are either underbanked or unbanked altogether. Fintech, or financial technology, has emerged as a key player in resolving this problem by providing creative ways to improve banking service accessibility and advance financial inclusion.

One of the main forces behind promoting equitable economic growth and lowering poverty is financial inclusion.

The sustainable management of water resources is paramount in modern aquaculture practices to mitigate environmental impacts and ensure long term viability. This chapter explores innovative methods and innovations meant to reduce water consumption in aquaculture systems. We start with a summary of the significance of water conservation in aquaculture before going into several strategies including aquaponics, biofloc technology, and recirculating aquaculture systems (RAS). Recirculating aquaculture systems (RAS) consume less water and area while producing fish in large quantities. A balance between water use, waste discharge, energy consumption, and productivity must be found to accomplish both environmentally friendly and economically viable production. The biofloc systems emphasise the significance of heterotrophic bacteria in transforming organic materials into microbial aggregates that function as a source of nutrients and a mechanism for water treatment. The creation of microbial biomass is encouraged by biofloc systems, which also maintain excellent water quality by means of carbon and nitrogen cycling. These benefits include less water exchange needs, increased resistance to disease, and increased feed conversion efficiency. In a symbiotic system, hydroponically grown plants are fertilized by fish excrement, while plants filter water for fish, resulting in aquaponics. This closed-loop method uses less water, doesn't require artificial fertilizers, and reduces environmental impact.

1.1. Global Dairy Scenario

Global milk production is forecast at 852 million tonnes in 2019, an increase of 1.4 per cent from 2018 (DAHD, 2019) – a smaller rate of growth, reflecting downward revisions made for India and the European Union. Much of the anticipated output expansion will originate in India, Pakistan, China, the European Union, and Brazil, partially offset by declines in some countries including Australia, Colombia, and Argentina. In India and Pakistan, herd expansions drive output growth, while in China, farm efficiency improvements underpin higher growth. The output is increasing in the European Union, although slowly as dry weather limited the supply of milk during the summer, whilst rising dairy herds and stable milk prices are supporting higher production in Brazil. By contrast, the output may decline in Australia and Colombia due to dry weather, whereas in Argentina, rising feed costs and restrained consumer demand may dampen production. Elsewhere, in the United States, higher milk yields hold up the growth momentum, whereas, in New Zealand, favourable weather corroborates a positive production outlook (DAHD,19).

Filler flowers play an essential role in floral arrangements by providing volume, texture, colour balance and supporting elements around major cut flowers. This chapter presents several commercially useful filler crops and their production technologies. It covers crop establishment, climate, soil, propagation, nutrient management, irrigation, crop regulation, pest and disease management, harvesting, drying and postharvest handling. Crops such as Ammi and other seasonal fillers are discussed from a commercial production perspective. The chapter also considers yield, stem quality and market requirements, demonstrating how filler crops can diversify farm income and create profitable opportunities within modern floriculture enterprises.

Agriculture is a branch of Applied science. It is the main enterprise in the world. In a true sense, it is a productive unit where the gift of nature i.e. land, light, air, temperature, water, humidity etc. are integrated into a single primary unit – crop plants and their usable parts are thus indispensable for human beings. Secondary productive units are animals (livestock), birds, insects etc. and they  feed on these primary units and provide more solid products such as meat, milk, wool, eggs, honey, silk, leather etc.
The word agriculture is derived from two Latin words i.e. Ager/Agric means soil and cultura means cultivation. Thus, “Agriculture is a science of cultivation of land”. It is an art and science both in which we study all the activities of human beings related to use of soil. 

1.1 INTRODUCTION

The share of agriculture in GDP is sharp declining. Its share which was 55.1 per cent in 1950-51 came down to 21.6 per cent in 2003-04 and it further reduced down standing barely at 14.6 per cent in 2009-10. Horticulture acconts for 29 per cent share in gross GDP obtained from agriculture sector from about 13.08 per cent area put forth under horticultural plantations (Anon., 2010). To achieve the targetted growth rate of 4 per cent in agriculture, horticulture has to grow at the accelerated growth rate above 7 per cent. As a result of R&D initiatives made, there has been considerable increase in horticultural produce which is acclaimed as golden revoution. Horticulture sector has emerged as the frontier area in dealing with the situation of livelihood security and the employment generation. However, looking to the pressure arising from rising population and erratic climatic variation, more attention is required towards the development of technology driven horticulture. Precision farming is being viewed as a promise in this regard.

Precision farming is the process by which exact or accurate results of farming can be obtained. It is a management strategy that relies upon detailed, site specific information to precisely manage production inputs.

Maximisation of quality yield by managing site variable specific management practices is the basic of precision farming. More emphasis needs to be given to make the farming sustainable. In order to make precision farming a reality the following area needs due consideration.

Introduction Agriculture plays a vital role in human societies and economies around the world. It is the prime food source for human populations, ensuring a reliable supply of nutritious food for the health and well-being of people everywhere. It is a major contributor to the economy of many countries, particularly in the developing world, where it provides livelihoods for millions of people and supports local and national economies. Agriculture is both impacted by and contributes to climate change. However, sustainable agriculture cultivation can also help to reduce the consequences of climate change by decreasing emissions of greenhouse gas and increasing resilience to extreme weather events.

This chapter reviews the published information on tsunami and attempts to characterize tsunamigenic sediments in terms of their microfossil content. Tsunamisare long-period waves generated by vertical displacements of marine watercolumn due to earthquakes, volcanic explosion and landslides. These waves can exceed heights of 25 meters (in shallow water) and lengths upto 100km with a velocity of more than 1000km/hour. Even at this magnitude, they are undetectable in deeper waters owing to very low wave height which in turn reduces significantly the response time, causing sudden havoc along coasts. They can cause flooding of coastal areas and affect areas thousands of kilometers away from their point of origin. These characteristics of tsunami imprint ensuing sediments with unique assemblage of microfossils.

INTRODUCTION

Shallow water progressive waves with very large wavelength and long duration caused by the rapid displacement of ocean water are called “tsunami”. Tsunami is a sudden non-meteorologically induced impulse in water regardless of size. Tsunamis are formed by submarine tectonic activity more often due to earthquakes and less frequently due to volcanic eruption, landslides near the coast, meteor impact and nuclear explosions.

The velocity of the tsunami varies and depends on many parameters such as bathymetry, height of the originating wave, initial pressure changes in the sea, etc. and can travel at a speed of more than 1000 km/hr. At the place of origin (directly above the epicentre of submarine earthquake or any other causative factor), the wavelength may be upto few tens to several hundred kilometres but the wave height is often less than one metre only. Since the velocity is proportional to the depth of the water column, it gets reduced to few tens of kilometres as the tsunami approaches the coast. However, the wave height increases significantly reaching 100 m in extreme cases. As a result, the tsunami strikes the coast with massive force. The effect is colossal in islands with low relief. The tsunami waves appear as flooding with water rushing inside the land more violently and with great force towards a river course. In several cases, when the tsunami arrives, the water level in the sea may drop significantly and the waters receding several hundred metres come back with great speed drubbing the coastal lands doubly from both the directions. Though an event of short duration in terms of geological history, tsunami deposits, owing to their higher rate of deposition and other salient characteristics, find place in stratigraphic records. This chapter is an attempt to review the characteristics of tsunami and tsunamigenic sediments, to find out the ability of microfossil content of such sediments for characterization and to identify tsunami deposits in stratigraphic records.

Dry areas specially arid and semiarid regions are characterized by harsh climatic condition with limited natural resources like fresh water and vegetation. Soil which is most important component for agricultural production is also problematic in this region due to high salt content. Further, these regions face dual water problems: very low rainfall and poor quality of available water. Most of the available groundwater in these areas has high salt content, which further enhance salt content in soil after irrigation with this water. Salinity of soil is one of the most severe abiotic factors limiting agricultural production in arid and semiarid regions of the world. Term ‘salt-affected soil’ refer to soils in which salts interfere with normal plant growth, and is broadly divided into saline, saline- sodic and sodic soil, depending on amounts of salt, type of salts, amount of sodium present and soil alkalinity. Excessive soluble salts in the saline soil limit the ability of plant roots to absorb soil water even under wet soil conditions, while high sodium content in sodic soil reduce the availability of Ca, Mg, other micronutrients and finally deteriorate physical condition of soil. Poor physical structure of soil results in difficult to till, poor seed germination due to soil crusting and restricted plant root growth. Due to the poor physical structure, sodic soils are also susceptible to wind and water erosion compared to saline soils. All these negative impact of salt accumulation on the soil finally affect growth and yield of the crops. As per estimates of ICAR-Central Soil Salinity Research Institute (CSSRI), Karnal, crop production loss to country due to sodicity is around 11.18 million tonnes while due to salinity is around 5.66 million tonnes. Furthermore, the area under this category is rising due to secondary salinization caused by faulty management of irrigation water, seepage loss, impeded drainage, rapid rise of water table causing water-logging. Certainly, these soils and saline water threaten the livelihood security of farming community. The area under cultivation is decreasing due to diversion of agricultural land in to other uses to meet needs of rising population and as such, agriculture has to make best use of poor quality land and water resources to meet the food demand. Therefore, management of salt affected soil become necessary for ameliorating negative impact and enhancing agricultural production in these regions. Each type of salt-affected soil has different characteristics and thus required different strategies for management.

Application of Climate-Smart Agriculture

Agricultural production systems are expected to change in response to climate change and ensure food security in different countries. Climate variability may further affect the agricultural production in future. To meet such challenges, there are many options to reduce the negative impacts of climate change on agricultural systems, make them resilient to climate change, and reduce emissions. Many technologies and practices can increase crop yields, farm income, and input-use efficiency, and may reduce GHG emissions (Khatri Chhetri et al. 2017). Climate-smart agriculture (CSA) is suggested to address the adverse effects of climate change and ensure food security. It is intended to achieve the three objectives of ensuring productivity, adapting and building resilience and reducing emission of GHG.