eChapters

Silage fermentation is a dynamic process involving interactions among the forage, microbial populations and the ensiling environment. A good fermentation process is not only dependent on the type and quality of the forage crop, but also on the harvesting and ensiling technique. There are various factors that influence the fermentation process and ultimately the nutrient composition and quality of ensiled feed. These are as follows:

1. Plant Factors

Forage characteristics at the time of ensiling are the predominant factor which determines the final quality of silage. Factors such as type of forage to be ensiled, maturity, DM content and WSC content of that forage, all influence the ease of ensiling and ultimately the quality of silage that is produced.

A hernia is the protrusion of an organ through a defect in the wall of the abdominal cavity in which it lies.

Classification
1. On the Basis of Anatomical Site
    Abdominal (umbilical and ventral)
    Diaphragmatic

An amine reacts with a carboxylic acid to form an amide. Similarly, the amino group  on one amino acid molecule reacts with the carboxyl group of another amino acid  to form a compound called peptide. A peptide bond is an amide bond that forms when the –COO- group of one amino acid reacts with the -NH₃+ group of another amino acid. The resulting compounds are called peptides. Even after this there is a reactive amino group and a carboxyl group in the peptide. If these groups react further a poly peptide can form and later a polymer called protein can form.

Introduction

Rapeseed-mustard is attacked by more than 43 insect species. Out of which, mustard aphid, Lipaphis erysimi (Kaltenbach); mustard sawfly, Athalia proxima (Klug); painted bug, Bagrada hilaris (Burnmerister); pea leaf miner, Chromatomyia horticola (Goureau) and Bihar hairy caterpillar, Spilarctia obliqua (Walker) are of major importance. Other pests are of sporadic occurrence. Status of important insect pests attacking rapseed mustard in India have been given in detail by Bakhetia and Arora (1993) and Singh 2005. The occurrence of various insect pests on rapeseed-mustard is stage-specific. This has been a gift provided by nature to help avoid inter-competition among them for their fullest exploitation of the host. The insect pests attacking rapeseed- mustard as given in Table 1 and at various stages of the crop in Table 2.

Amaranth is one of the oldest food crops in the new world, with evidence of cultivation reaching back as far as 6-700 BC. This is probably due to the ability of these plants to adapt to new environments, an extremely broad climatic adaptability and their competitive ability, which permits culture with minimum crop management, thus making it an easy crop to cultivate and domesticate.

The adaptability of Amaranths could lead to cropping systems in these semi-arid regions of South Africa, so providing a very nutritious vegetable dish to the people’s diet.  Careful attention should be paid to the variety planted if it is to be successfully grown as a commercial crop so as to choose one which is palatable. The economic viability of growing amaranths should also be considered against its background as a food, particularly in areas of low rainfall, as it will still produce a yield, even under low rainfall and high temperature regimes.

It is clear that this crop has the potential to address malnutrition problems, earn money for farmers, decrease environmental damage, reduce poverty in communities and increase supply of food. Our fresh water supplies are decreasing, climatic change is increasing occurrence and severity of drought and heat. There is no doubt that these underutilised crops have the sufficient untapped potential to address a number of agricultural challenges, we are facing in the world today.

Method I
Reagents
    1.    20% sodium carbonate.
    2.    Conc. hydrochloric acid.
    3.    4% sodium hydroxide
    4.    10% calcium chloride
    5.    Ammonium hydroxide
    6.    Potassium permanganate (0.05 N)

Procedure
Take 2-5 g of powdered sample in a beaker without spout, and add 40 ml of water and boil for half an hour. In case of faeces, add 40 ml of 4 percent NaOH instead of 40 ml of water to form silicates. Now boil, for half an hour with cold water flask over the beaker, then add 10 ml of 20 percent sodium carbonate solution and boil for  another half an hour. During these two cooking processes, the following changes take place.

Tulip cut flower is first among the bulbous ornamentals due to its attractive colours and exquisite flowers. Tulip is a member of Liliaceae family, commonly grown from bulbs. The name tulip is derived from the Persian word “toliban” meaning “turban”, which is an appropriate term to describe the flower shape of certain tulips. The mother bulb dies and is replaced by several daughter bulbs, each of which is an annual unit of growth borne in the axils of the mother bulb scale. Tulips are basically grown for three purposes i.e. bulb production, forcing as cut flower and potted plant and for landscaping (Singh, 2006). The world tulip flower industry is dominated by the Netherlands. Another important tulip producing country is France.

ORIGIN AND DISTRIBUTION

The primary gene centre of the genus Tulipa is located in the Pamir Alai and Tien Shan mountain ranges of central Asia. Diversification in this region, resulting in a distribution from Morocco to Western Europe and eastward to Western China. A second gene centre has been found in the Caucasus (Hoog, 1973). However, Bailey (1963) reported that the tulip is native of Siberia, Turkey, Asia Minor, China, Japan and Mediterranean countries of Europe, the species are particularly abundant in central Asia, in the Bokhara region.

Tulips were first seen in Turkey. The vast majority of species occurs in central and western Asia in the countries such as Turkey, Afghanistan, Iran, Kazakhistan, Turkmenistan, Uzbekistan and Georgia. East of this center of distribution, the range of a couple species extends into northern India and far western China but on limited basis. One species of tulip i.e. Tulipa stellata is found wild in the mid and high hills of Himachal Pradesh and T. aitchisonii is native of Himalaya. There are around a hundred species of Tulipa originated from Turkey to the Pamir and Hindu Kush mountains in Asia, which have been used for breeding purposes. In fact, a small number of species can be found in the wild in Europe and those are all restricted to southern parts, primarily in the Mediterranean region as far west as Portugal. There is not a single species of tulip native to Holland, the country frequently associated with these colourful and well known flowers.

Records show that tulips were in cultivation in Turkey as early as 1000 A.D. In 1578, first tulip appeared in England. Carolus Clusius planted the first tulip in 1593 in the botanical garden in Leiden (The Netherlands). The tulips appear in France in 1598. During 1600-1650 tulip become an exclusive garden plant and it was planted in strategic places in various gardens. Commercial cultivation of tulip started during 1600 in South Haarlem. The famous first parrot tulip was described in 1630. The famous tulip firm namely Voorhelm was established in 1650 in the Haarlem. An inventory of 126 different tulips was released in 1661. The bulbs of tulip had been sold to the U.S. from Holland as early as the eighteenth century. During nineteenth century, several hybrids were developed and cultivable area expanded largely. A fragrant variety Prins van Ooslenrijk and a double early tulip Murillo were developed in 1860. The worldwide popular Darwin tulip group was introduced in 1889. The first classified list of the tulip name including cultivation practices and flower management was released during 1914-1915. The most of the modern tulip complex is based on T. gesneriana with some important hybrids with species tulip. There are approximately 100 of these wild or species of tulips that occur naturally in the world and several thousands of distinctly different hybrids, selection and mutants that are gracing gardens and becoming remunerative to the growers around the world. In India its cultivation is limited to amateur gardeners of hilly areas in Kashmir and Himachal Pradesh. Srinagar, Kangra, Kullu, Mandi, Solan, Shimla, etc. are most suitable areas. Tulip cultivation can be extended in new areas like hills of Uttarakhand in India.

There is no single factor as important in the production of fine quality dairy products as absolute and complete cleanliness.

R.B. Barrett

It is not enough to provide milk for man, it must be high quality milk. It would be impossible to provide man with milk and milk products of superior quality if we were unable to remove milk soil and to kill residual microorganisms. Respectively, these are the processes of cleaning and sanitizing.

To successfully provide the atmosphere for proper food safety, the basics must be thoroughly understood. The basics of food safety begin with good understanding of sanitation processes, food-handling procedures that protect from, or eliminate cross contamination problems and specific attention to inspection of and follow up for all processes. Food safety activities need to be programmed into available time of day scheduling just as production requirements do. Whether special personnel or separate shifts handle cleaning responsibilities or you clean as you go on the production line, time must be made available. Safe products leaving the facility must be the watch word of all employees involved with the process.

In order to ensure safe food supply a high level of sanitation should be maintained throughout the food production chain. The word ‘sanitation’ is derived from the Latin word “sanitas” which means “health”. To further apply this word to the food industry, sanitation is the creation and maintenance of hygienic and healthful conditions when processing, preparing and handling food. Sanitation is the application of science to provide wholesome food handled in a hygienic environment by healthy food handlers to prevent contamination by food spoilage microorganisms. Effective sanitation refers to the mechanisms, which accomplish these goals.

• What is Meant by the Term Expert?
• Building Blocks of Expert Systems
• Designing Expert Systems in Problem Solving 
• Applications of Expert System
• An Expert System for Decision Problem
• Advantages of Expert System
• Cases of Expert Systems in Agriculture

Several cryogenic agents have been used in many countries for freezing and preservation of bovine semen like solid carbon-di-oxide (-79°C), liquid air (-183°C), liquid helium (-268°C) and liquid nitrogen (-196°C).  Liquid nitrogen is 4th coldest substance known and its small amount is converted into a very large amount (near about 700 times) of its volume when exposed to atmosphere.  It is a colourless, odourless, non-irritant, non-toxic, non-caustic, non-corrosive, non-inflammatory and inert gas having boiling point -196°C temperature.  Being a liquid it comes into good contact with the surface of the semen straws and constant storage temperature is maintained throughout the straw and due to these properties LN2 is most widely used refrigerant in the world.

Introduction

The world demand for wood is continuously increasing due to increase in population. The ever increasing population has led to depletion of existing timber reserves and the forestland base has been reduced by increased allocation of forest areas to urban, agricultural, recreational and other uses. The growing awareness towards development of plantations has generated a voluminous increase in the demand for quality planting material. Conventionally, propagation is achieved through sexual (seeds) or vegetative methods (rooting of cutting, grafting, layering, etc). Propagation through seeds is routinely used for production of planting material but it generates immense genetic variability which is not desirable while propagating perennial tree species. In order to propagate selected trees with desirable features vegetative propagation methods like rooting of cuttings, grafting, layering etc have been developed. These methods can produce genetically identical off springs thereby preserving the advantageous traits;

Introduction

The basic principle of conservation agriculture is to minimize soil disturbance in order to stabilize the soil structure, increase the fertility and balance the eco-system. Applied together, conservation agriculture practices – no tillage, permanent soil cover, use of crop cover and crop rotation, residue management- have complementary positive outcomes; no tillage maintains soil structure and biological activity; a permanent soil cover protects the soil surface from erosion and creates a stable and favourable micro-climate; cover crops and residue management provides organic matter, reduce soil erosion and improves soil fertility. Management of the soil water balance should be considered as a positive for cover crops and improvement of soil water infiltration, reduction in soil water evaporation, and decreasing water extraction from the soil would impact subsequent plant growth.

MOST OF THE ENERGY FOR LIFE COMES FROM SUNLIGHT

Total rate of energy delivery from sun to earth (at the top of the atmosphere) = 175,000 terrawatts

Terrawatt = 10^12 watts

Rate of energy capture by plants from the sun = net primary productivity (NPP) = 100 terrawatts

Only ~ 0.06% of sunlight is captured

Captured in chemical bonds, especially in sugar

Small amounts of energy are available to specialized microorganisms from chemical reactions not linked to sunlight

It is estimated that 99% of the energy used by living cells comes from the sun

Incorporation of sunlight into chemical bonds occurs through the process of photosynthesis

“Invented” by cyanobacteria about 2 billion years ago

Autoclave Operating Procedures

Place all material to be autoclaved in an autoclavable tray. All items should have indicator tape. Separate liquids and solids should be autoclaved separately. Ensure that the lids on all bottles are loose. Do not put a large number of items in tray, to ensure that all items reach the appropriate temperature. Also allow sufficient air/steam circulation.

Steps in autoclave

Pressure should read ‘O’ when you open the pressure chamber of the autoclave.

Place items to be autoclaved in the autoclave and close the door. Some autoclaves require that you also lock the door after it’s closed.

Set time - typically 20 minutes.

Temperature should be set at 121°C already, but double-check and change if necessary.

Set cycle: If liquid, set “liquid cycle” or “slow exhaust”. If dry, set “dry cycle” or “fast exhaust” + dry time.

Start the cycle. On some autoclaves, the cycle starts automatically at step 5. On others, turn to “sterilize”

7.1 Introduction

Fisheries are emerging as one of the fastest growing food production system all-over the world. The potential for fisheries development world over and especially in India is highly promising in view of physical and biological resources available coupled with technological development. The demand for fish fishery products is ever increasing as the awareness of health benefits are being made available to public at large. The world fish production has not kept pace with demand which means less and less fish is available. Nevertheless, a large fraction of this valuable commodity is wasted due to deterioration after landing or consumer preference. An estimate by FAO [1] indicates nearly 20-25% of the total catches are wasted as postharvest loss. Better utilization of aquatic resources should therefore, aim primarily at reducing this enormous loss by improving preservation of fish and fishery products and upgrading the discarded low value fish to high value fishery products. The processing of fish into different types of products generates considerable waste. Commercially, fish is being processed into fillets, steaks, mince, canned products and a variety of ready-to-eat products. Fish processing plants contributes substantial wastes in the form of skins, bones, offal, exoskeletons from shrimps and nutrients in wash water from surimi plants.

Fish processing waste utilization is an important issue for the seafood industry both from a regulatory standpoint as well as one that has potential economic impacts. It is estimated that only 25-50% of the raw material is utilized for primary products (fillets, canned and stabilized mince production). The remaining 50-75% of the raw material is considered processing waste and is utilized for low-value products or disposed-off at sea. A large volume of solid waste is currently processed into fish meal, fish protein hydrolysates, and fertilizers. A small percentage is processed into higher valued items, such as, seafood flavourants, colourants, chitosan, enzymes, etc.

1. OVERVIEW OF THE NATIONALAGRICULTURE SCENARIO - NATIONAL EXTENSION SYSTEMS, SCOPE AND IMPORTANCE

Like in many developing countries, Agriculture Sector being the backbone of the Sri Lankan economy, contributes significantly (11.3 per cent in the year 2007) to the Gross Domestic Products (GDP) and the economic growth by 7.7 per cent (Central Bank of Sri Lanka, 2007). As to the situation in 2007, 80 per cent of country’s population of 20.01 million is rural and 31.3 per cent of the total Sri Lankan work force is employed in Agriculture sector. Nearly 14.6 per cent of the population still depends on the agriculture as the main livelihood. The country’s GDP has been growing at 6.8 per cent per annum (in 2007), though that of agriculture is growing at only 3.3 per cent.

Country as a whole is constituted by 25 administrative districts all of which is encompassed into nine provinces. Of these, nearly four fifths are predominantly agricultural districts with over 60 per cent of the total population living in them. Majority of the population in these districts constitutes the farming community and they, by and large, are the ones who keep the nation feeding. Apart from plantation agriculture which looks after large scale plantation level crops like tea, rubber, coconut along with other crops like cinnamon, pepper, coffee, cloves, nutmeg etc., grown extensively for the export market, almost all other food crops are grown by farmers, majority of who own land plots less than 2 hectares. On the one hand, this makes agriculture mainstay of a major sector of the population and on the other hand they are spread nearly everywhere in the country rather thinly on the ground.

Eukaryotic, spore – producing, achlorophyllous organisms with absorptive nutrition that generally reproduce both sexually and asexually and whose thallus is usually filamentous, branched somatic structures known as hyphae, typically surrounded with cell wall.

Mycology – Study of fungi

The fungi can be divided into two groups namely

True fungi: Chytridiomycota, Zygomycota, Ascomycota, Basidiomycota

Additional phyla: Myxomycota, Dictyosteliomycota, Acrasiomycota, Plasmodiophoromycota, Oomycota, Labyrinthulomycota, Hypochitridomycoya.