eChapters

Environmental factors play a crucial role in determining the quality and shelf-life of fruit during storage. Storage facilities are designed to hold fruit after harvest and before it reaches retail locations, while ripening rooms, often part of these facilities, focus on ripening unripe fruit. Although their processes differ, both storage and ripening facilities aim to control environmental conditions that influence fruit ripening and longevity.
Key factors affecting fruit ripening include temperature, relative humidity, ethylene (C2H4), carbon dioxide (CO2), and oxygen (O2). These levels vary based on the type of fruit and whether the goal is to store or ripen it. Fruit continues to respire and transpire after being harvested, altering its environment through its physiological changes.
The three primary ways fruit affects its surroundings are:
• Respiration: Fruit consumes oxygen to break down sugars and produce heat, water, and carbon dioxide. Lowering the temperature during storage reduces respiration, ripening, and aging. CO2 and O2 levels also impact the rate of respiration.
• Transpiration: When there is a difference in water vapor pressure between the fruit and the surrounding air, the fruit loses water. This can lead to shriveling, spoilage of quality and flavor, and weight loss. Keeping relative humidity high during storage helps retain moisture and maintain fruit weight, which is important for maintaining its market value.

Introduction
Pathogenic organisms that cause diseases in plants are generally referred to as plant pathogens. Fungi, bacteria, viruses, viroids, algae and protozoa are the important phytopathogenic organisms responsible for plant diseases and they cause immense economic losses to growers. Recent estimates indicate that crop losses due to diseases range from 17-30%, primarily caused by fungal, oomycete, and nematode pathogens (Agrios, 2005). Beyond biotic factors, crop losses can also be attributed to abiotic causes, such as poor agricultural practices, nutrient deficiencies, changes in temperature and rainfall patterns, inadequate/overirrigation and weather extremes, all of which exert selection pressure on plant pathogens, potentially leading to new host infections. Hence, for effective disease management strategy, accurate identification and diagnosis of plant pathogens are of paramount importance before the pathogen induces any epidemic leading to immense loss of crop plants which is certain. Often, identification can be accomplished either visually through microscopic observation of disease-causing micro-organisms or molecular diagnosis based on nucleic acid detection methods. Microscopic observations alone are inadequate for species-level identification of plant pathogens and can often lead to taxonomic errors due to the potential for misidentification of organisms. Nucleic acid-based diagnostic tools allow for the sensitive detection, precise quantification, and specific differentiation of pathogens.Although numerous nucleic acid-based methods are available for plant pathogen detection, PCR-based diagnostics, especially those employing DNA barcodes, are still considered highly reliable and accurate. Scientists, especially plant pathologists, can now easily identify and diagnose most plant diseases as many standardized phytopathogen barcodes facilitate rapid, early, and accurate identification of plant diseases.

ABSTRACT

Boswellia serrata Roxb. ex Colebr. known as ’Indian Frankincense’ is a multiferous medicinal plants known for boswellic acid and it has application in traditional ayurvedic formulation. The plant possess anti-rheumatic, anti-pyretic, anti-cancerous, anti-inflammatory, anti-hyperlipidemic, anti-coronary, analgesic and hepatoprotective properties due to the presence of several loaded bioactive compounds such as α-amyrins, β-boswellic acid, acetyl-β-boswellic acid, 11-ketoβ-boswellic acid, acetyl-11-keto-β-boswellic acid, tetracyclic triterpenoic acids and several others in minor quantities in different parts of plants. Mostly oleo-gum resin is usually used in Indian system of medicine, and acetyl-11-keto-β-boswellic acid (AKBA) is the most potent 5-lipoxygenase enzyme inhibitor responsible for inflammation, anti-cancer (G1 phase arrest) and other group of enzymes liable for allied activities. Besides, it yields essential oils and its major constituents are monoterpenoids such as pinene (2.05-64.7%), cisverbenol (1.97%), trans-pinocarveol (1.80%), borneol (1.78%), myrcene (1.71%), verbenone (1.71%), limonene (1.42%), thuja-2,4(10)-diene (1.18%) and p-cymene (1.0%). The copaene is the only sesquiterpene reported in minor quantities from essential oils of this species. Its essential show different actvities in relation to anti-cancer and antiinflammatory. From future perspectives, there is a need to carry out more research on its constituents for the development of value added products and drugs. Investigation on ecology and application of biotechnological intervention would helps in varities improvememnt, cultivation and conservation of this species.

There are manyreasons for using computerstoday. Word processing is area which has proved computers to be powerful than ever. There are many different kinds of word processors availabletoday, however, most share the same basic functions and do not require advanced computeror typing skills to use. These basicfunctions include typing, savingdocuments,openingdocuments, copying, pasting, cutting printing, checking spelling, etc. The commonly used word processors include Microsoft Word, ClarisWorks, Word Perfect, Word Pad, Apple Works, etc.

4.1 Microsoft Word

4.1.1 Introduction

Microsoft Word, or Word as it is commonly known, is a software application that allows the user to perform word processing. The word processing means the creation, input, editing, and production of documents and texts by means of computers systems. Microsoft Word allowthe user to format text with attributes such as bold, italics, font size, and margins. It is part of the Microsoft Office suite of applications and is a highly popular programme for the workplace.

Microsoft Word was first released in 1983 under the name Multi-Tool Word for Xenix systems. Versions were later writtenfor several other platformsincluding IBS PCs running DOS in 1983,the Apple Macintosh in 1984 and Microsoft Windows in 1989. The latest release is Word 2010.

25.1 INTRODUCTION

With the natures gift, consciously or unconsciously human select the best among the lot based on sensual judgment. Warnings about the dangers of the excessive use of the chemicals for the human health and biodiversity have been well reported over the years. The world health organization estimates the occurrence of some more than 25 million cases of excessive chemical use slow poisoning globally each year (Anon, 2010). In developing countries, sulphur and chlorine based formulations are often used for post-harvest treatments of horticultural produce. Recently, some bio-based and other safe post-harvest treatment materials have been formulated for loss reduction and shelf-life extension of fresh fruits. In this article, the recent and safe materials/agents for postharvest treatments are discussed.

25.2 MATERIALS FOR POST–HARVEST TREATMENTS

25.2.1 Polyamines

Polyamines (PAs) are low molecular weight small aliphatic amines that are ubiquitous in living organisms and have been implicated in a wide range of biological processes, including plant growth, development and response to stress (Smith, 1985). In plants, they have been implicated in a wide range of biological processes, including growth, development and abiotic stress responses. The most common polyamines are Putrescine (PUT), Spermidine (SPD) and Spermine (SPM) found in every plant cell in titers ranging from approximately micromolar to millimolar, together with the enzymes regulating their metabolism and depend greatly on environmental conditions, especially stress.

Introduction

The realm of agricultural policies and environmental policies stands as two critical pillars influencing the sustainability and equilibrium of our ecosystem. Agricultural policies primarily focus on regulations and measures instituted by governments or institutions to manage agricultural practices, production, distribution, and rural development. Conversely, environmental policies aim to safeguard and conserve natural resources, biodiversity, and ecosystems while mitigating the adverse impacts of human activities on the environment.

Overview of Agricultural and Environmental Policies

Agricultural policies often encompass subsidies, price controls, land use regulations, and trade agreements aimed at bolstering agricultural productivity, ensuring food security, and supporting rural economies (Fischer & Edmeades, 2010). Conversely, environmental policies encompass a broad spectrum of regulations, such as pollution control measures, wildlife protection, habitat conservation, and climate change mitigation strategies (Boyd & Banzhaf, 2007).

Importance of Understanding Their Interactions

Understanding the interactions between agricultural and environmental policies is crucial due to their interconnectedness and potential trade-offs. Agricultural activities significantly impact the environment through deforestation, water pollution from agricultural runoff, greenhouse gas emissions, and loss of biodiversity (Pretty et al., 2008). Conversely, environmental conditions greatly influence agricultural productivity and sustainability, including soil quality, water availability, and climate patterns. Recognition of these interdependencies is vital for devising coherent policies that foster sustainable agricultural practices without compromising environmental integrity (Tilman et al., 2011). The challenge lies in formulating policies that strike a balance between agricultural production goals and environmental conservation imperatives.

Introduction

Plants contain a variety of substances of nutraceuticals importance which are useful medicines, food additives, cosmetics and health supplements etc. However, low availability under in vivo condition, decreased plant resources, increases in labour cost and other problems in obtaining these high-value added substances from natural plants have pointed toward the use of in vitro techniques for production of the products. Because in vitro cultures are not affected as the production affected under in vivo conditios.This has led scientists and biotechnologists to consider plant cell, tissue and organ cultures as an alternative way to produce the corresponding secondary metabolites.Therefore, studies on the production of useful metabolite by in vitro techniques have been carried out on an increasing scale since the end of the 1950’s. The large scale cultivation of tobacco and various vegetable cells was examined in the late 1950’s and early 1960’s in the U.S., Canada, and Europe. At present, several firms are manufacturing a plant pigment, shikonin, and ginseng cell biomass on a commercial scale and several other products including anti-oxidant products.

Research efforts on in vitro derived extracts is well documented on each of these major product categories: flavors (onion and garlic, peppermint and spearmint, fruit flavors, chocolate aroma, seaweed flavors, vanilla, celery, coffee, spice, sweeteners, and so on); edible colors for foods and medicines (mainly betalains and anthocyanins): non-food pigments for cosmetics and textiles (shikonin, berberine, and various other products); several examples of fragrances and essential oils; and bioactive natural insecticides and phytoalexins useful in current integrated pest management programs. Of course, intensive activity has centered on production of natural drugs of chemoprotective compounds from plant cell culture. Some of the most prominent pharmaceutical products in this latter category include ajmalicine (a drug for circulatory problems) from Catharanthus roseus and taxol (a phytochemical effective in treatment of ovarian cancer) from Taxus species.

Taxonomy

Taxonomy is the science that deals with the identification, nomenclature and classification of organisms.

Systematics

It is scientific study of organisms with the ultimate object of characterizing and arranging them in an orderly manner.

Classification

Classification is the ordering of organisms into groups and systems, based on their morphological, phylogenetic and physiological relationships.

Nomenclature

It is the system of assigning names to the taxonomic groups or organism according to international rules.

1.1 Introduction

Gender mainstreaming, a concept that emerged from international frameworks and global development agendas, is a strategy aimed at achieving gender equality by integrating gender perspectivesinto allstages of policy-making and organizational practices. Originating from the recommendations of the 1985 Third World Conference on Women in Nairobi and formally endorsed at the 1995 Fourth World Conference on Women in Beijing, gender mainstreaming has evolved into a fundamental approach within international development efforts. It was adopted as a methodology by ECOSOC in 1997, marking a significant commitment across the United Nations system to advance gender equality goals comprehensively.

In essence, gender mainstreaming is not merely about inclusivity; it represents a proactive stance towards challenging and reshaping societal structures and ideologies that perpetuate gender disparities.

Abstract
Aquaculture has emerged as a key solution for meeting the rising global demand for aquatic food products, contributing significantly to food security. However, its rapid growth faces significant challenges from climate change, including rising temperatures, ocean acidification, extreme weather events, and habitat degradation, which threaten production systems and the livelihoods dependent on them. This chapter explores the role of regulatory frameworks in mitigating climate impacts, promoting sustainability, and enhancing resilience in aquaculture. It emphasizes the importance of integrating aquaculture into national and global climate adaptation plans, adopting ecosystem-based approaches, and fostering innovative practices like integrated multi-trophic aquaculture (IMTA) and cultivating climate-resilient species. The chapter highlights the need for advanced tools, such as climate monitoring systems and genetic advancements, to mitigate risks while ensuring resource efficiency and productivity. Addressing barriers like complex governance structures and limited resource access is essential for effective policy implementation, particularly in vulnerable regions. By combining robust legal instruments, technological innovations, and community-based governance, aquaculture can transition toward a sustainable and climate-resilient future, ensuring long-term environmental health, economic stability, and social equity while continuing to play a vital role in global food systems.
Keywords: Rising temperature, Salinization, Ocean acidification, Resilient aquaculture and Climate adaptation

ABSTRACT
Methanogenesis is an important biogeochemical process takes place in anaerobic ecological sites. It is the last step of terminal electron accepting process of anaerobic respiration. Methanogens synthesise CH₄ using acetate and CO₂ as precursor molecules. Former types of methanogens are referred as acetoclastic methanogens and the later ones as hydrogenotrophic methanogens. After biogenesis of CH₄, it is emitted to atmosphere and causes global warming. In aerobic ecosystem CH₄ is oxidised by methanotrophs to CO₂ a less global warming molecule. However, in anoxic environment CH4 acts as an electron donor and interacts with various electron acceptors. Methane modulates denitrification, Fe reduction, SO₄ reduction and organic matter decomposition. Manuscript elucidates methanogenesis and highlights the pathways of interaction between methanogenesis and cycling of electron acceptors in various anaerobic ecosystems in relation to global C and N balance.

We are living in a world that is in a grim state of environmental disruptions. Callous developmental activities resulting in pollution of all environmental components and gradually culminating in global warming, climate change, and species extinction are responsible for triggering the processes of environmental disruption. Pollution of air, water, and soil is rapidly assuming alarming proportions.

The very processes of socioeconomic development are now posing threat to economic progress as well as to human health. Ominous changes in global climate are posing threat to life on Earth. The irony is that the major cause of environmental disruptions is anthropogenic rather than natural. Human’s materialistic progress and environmental pollution in our contemporary world go hand in hand.

Agribusiness is a term used to describe the sector that encompasses all economic activities that are related to farming, i.e., breeding, crop production/farming, farm machinery, distribution, marketing etc. It relates to industries that are engaged in farming or that produce farm inputs. Examples of agribusiness include farm machinery manufacturing, seed supply, and agrichemicals. It also is used to describe businesses that are involved in the marketing and distribution of farm products. These businesses include warehouses, wholesalers, processors, retailers, and more. Any company that participates in the production, marketing, safety, and distribution of food is involved in agribusiness. More precisely it is defined as a sector that supports the growth of the agricultural industry, which is pivotal to economic growth. It also continues to play a crucial role in the growth of developing countries. Agribusinesses can potentially improve agricultural productivity, which is why governments often offer subsidies to agricultural businesses. Agricultural activities also contribute to an improved system of food security and sustainable food production, as well as income for a majority of the poor in developing countries. However, the activities increase the emission of greenhouse gases and contribute to global warming – which is why innovation is important in the sector to address such problems.

Phosphorus (P) is a critical nutrient in crop production, due to its low bioavailability in soils (Feng et al., 2004). Phosphorus is the vital component of DNA, RNA, ATP and photosynthetic system and catalyses a number of biochemical reactions from the beginning of seedling growth through to the formation of grain and maturity. Many factors influence soil P availability like type of parent material from which the soil is derived, degree of weathering and climatic conditions. In addition to this, erosion, crop removal and phosphorus fertilization and soil phosphorus levels also affect P availability in soil. Rock phosphate is the key raw material used for manufacturing phosphatic fertilizers on which the food production depend.

Plants have the ability to synthesize a wide variety of chemical compounds that are used to perform important biological functions, and to defend against attack from predators such as insects, fungi and herbivorous mammals. Many of these phyto chemicals have beneficial effects on long-term health when consumed by humans, and can be used to effectively treat human diseases. At least 12,000 such compounds have been isolated so far; a number estimated to be less than 10% of the total (Tapsell et al., 2006; Lai and Roy, 2004). These phyto-chemicals are divided into: (1) primary metabolites such as sugars and fats, which are found in all plants; and (2) secondary metabolites (SM) – compounds which are found in a smaller range of plants, serving a more specific function (Meskin, 2002). For example, some secondary metabolites are toxins used to deter predation and others are pheromones used to attract insects for pollination.

Post-Harvest Losses

A post-harvest loss is defined as the measurable qualitative and quantitative food (including fruits and vegetables) loss along the supply chain, starting at the time of harvest till its consumption or other end uses (Hodges et al., 2011). Pineapple fruits are highly perishable in nature and continuously respired even after harvesting which limited its shelf-life leading to the storage problems (Hossain and Bepary, 2015) and decline in production due to post-harvest losses (Babalola et al., 2008). During the storage for distant marketing, pineapple fruits easily losses its moisture content through transpiration and become more susceptibility to microbial spoilage (Hossain and Bepary, 2015). In India the top five leading pineapple producing states are West Bengal, Assam, Karnataka, Meghalaya and Manipur (Anonymous, 2018). The measurable qualitative and quantitative losses of pineapple at post-harvest level are from the various stages of handling from the farm level up to the consumers (Table 1 and 2).

A poster is a printed or digital graphic display designed to convey information or messages to a target audience. Posters can include a combination of text, images, and graphics and are often used for advertising, educational purposes, propaganda, and events promotion. They are typically displayed in public spaces to reach a broad audience.

Historical Background and Origins of Posters

Early History

Ancient and Medieval Times: Early forms of posters can be traced back to ancient civilizations where announcements and decrees were inscribed on stone tablets and walls. The use of posters as we know them began with the invention of printing technologies.

15th Century: The invention of the printing press by Johannes Gutenberg in the 15th century paved the way for mass production of printed materials, including early forms of posters.

Udder health, foot health and heat-stress management are major components of dairy herd productivity and animal welfare. This chapter addresses prevention, examination and management of mastitis, including milking hygiene, teat dipping, dry cow therapy, diagnostic testing and appropriate treatment. Foot health is emphasized because neglected feet can result in lameness, reduced milk production, impaired reproduction and increased culling. Heat stress management includes environmental and shed-based interventions to reduce excessive solar and thermal load. The chapter integrates practical management strategies for maintaining udder integrity, sound locomotion and thermal comfort, thereby supporting productivity and overall health of dairy animals.

Resource use efficiency in Indian agriculture

Resource use efficiency in agriculture is defined to include the concepts of technical efficiency, allocative efficiency and environmental efficiency. Public investment, subsidies and credit for agriculture are used in an efficient manner. There are large scale inter regional as well as inter farm variations in factor productivity due to varying influence of different factors in different regions. A number of management factors such as timeliness and method of sowing, transplanting, irrigation and application of right doses of inputs and input mix play an important role in influencing inter-farm variation in crop productivity. Growing marginalization and fragmentation of land holdings coupled with rising incidence of informal tenancies and poor rural infrastructure such as road, electricity, markets and education affect factor productivity. The availability of good quality irrigation water coupled with flexibility of irrigation and drainage system and appropriate methods of application as well as pricing of irrigation water is crucial for sustainable use of land and water resources.

The stochastic frontier production function to analyse the resource use efficiency of urban farmers in Uyo, Southeastern Nigeria was done. The result shows that 65% of urban farmers were 70% technology efficient; maximum efficiency is 0.91, while minimum efficiency in urban farm is 0.43.

Introduction

The animal husbandry and agriculture are the major resource of income for the farmers and directly affects the economic conditions of farmers. Livestock sector plays a vital role for livelihood food security in India. Buffalo plays an important role in dairy industry and contribute 49 per cent of total milk production in India (BAHS, 2017). Murrah is one of the best buffalo breeds in the world and also widely used for up-gradation of non-descript buffaloes in India. Murrah buffalo have poor thermoregulation mechanism compared to other domestic ruminants in tropical countries and are more prone to heat stress due to very less sweat glands, jet black colour and thin hairs on body surface (Das et al., 1999; Khongdee et al., 2013) which reduce the ability of cutaneous evaporation and largely responsible for its low productivity and consequently reducing the reproductive efficiency (Gudev et al., 2007). India continues to be the largest milk producer in the world since 1997. Milk production has increased from 165.4 million tonnes (2016-17) to 176.4 million tonnes (2017-18) (DAHD, GOI). The demand for milk is increasing at a very fast pace due to exponential population growth and the gap in the production and supply is increasing. Out of 300 million bovines, only 88 million are in milk leaving large unproductive animals including 84 million males (19th Livestock census, 2012). If the gap of production and supply is to be bridged, the large number of constraints that affect reproductive efficiency and productivity of dairy animals must be addressed effectively. One important factor that can contribute to the productivity of animals is qualitative production and quantitative adequacy of semen doses for A.I.