eChapters

ALL MOLECULES MOVE CONTINUOUSLY BY SIMPLE DIFFUSION

Heat energy causes molecules to move randomly (sometimes called Brownian motion)

If the concentration of molecules is different in 2 regions (this produces a concentration gradient), diffusion will cause molecules to move from a region of high concentration to one of low concentration

The higher the concentration gradient the more rapid the net diffusion

Diffusion evens out the concentrations so they are equal everywhere (maximum entropy)

If 2 different substances have the same concentration gradient, usually one will move faster than the other

Differences in speed between molecules with the same concentration gradient are given in terms of diffusion constants

A substance with a high diffusion constant moves faster than one with a low diffusion constant

In general, large molecules move slower than small molecules

Diffusion across a membrane is called permeability, and membrane diffusion constants are called permeability constants

Abstract

The landslides that swallowed the whole of Malin village, Maharashtra on the early morning hours of 30 July, 2014 is one of the major disasters, next only to Kedarnath episode in the recent years. Consequently, the Department of Science and Technology, New Delhi, constituted an expert committee comprising the authors of the article which made a visit and took the on the spot assessment of the disaster. Their observations show that the area is covered by the Deccan basalts, which are layered with compact and vesicular basalts; fractured and jointed basalts due to tectonics and the cooling of the basalts; and have also undergone extensive geomorphic evolution. Due to such geologic/geomorphic setting, the flow layered basaltic hillock in which Malin is located is naturally benched, which is further being leveled for the agriculture purposes. The deforestation, leveling of the hills, excessive usage of water for irrigation and the lack of drainages outlet in such benched and leveled slopes have assigned high degree of landslide vulnerability to the area. Over this, when torrential rainfall occurred in the last week of July, the landslide was triggered. On the basis such inferences, some mitigation measures have been evolved after the visit.

Even while the world is ageing, it is not prepared for it. There are 962 million people over 60 in the world as of 2017 with 310.0 million of them living in wealthy countries and 652.2 million in developing ones, according to data from the UN's Department of Economic and Social Affairs (DESA-UN 2017). According to projections, there would be 2.1 billion seniors worldwide by the year 2050 (rich countries: 421.4 million, developing countries: 1670.5 million). By 2030, 80% of the old people in the globe will live in developing countries (DESA-UN, 2015). Elderly individuals in rural developing countries confront challenges such as the lack of pension coverage, work difficulty and high medical costs. Their poor diets and deteriorating poverty raise their risk of chronic illnesses like diabetes, heart disease and cancer (Marshall et al., 2001). 

Use of Antimicrobial Agents

The most frequently used classes of antimicrobial drugs in animals include tetracyclines, sulfonamides alone or in combination with potentiators, quinolones particularly fluoroquinolones, aminopenicillins alone as well as in combination with potentiators, first- and second-generation cephalosporins and also third- and fourth-generation cephalosporins, macrolides, and glycopeptides [1]. The “Terrestrial Animal Code”, issued by the Office International des Epizooties (OIE) in 2022 represents recent guidance for the responsible and prudent use of antimicrobials in veterinary medicine [2]. It describes the respective responsibilities of the competent authority and stakeholders in all processes pertaining to veterinary antimicrobial agents ranging from authorization to the administration to the animals.

INTRODUCTION
In an internal combustion engine, fuel is combusted within the cylinder to generate power. During the power stroke, the temperature can reach up to 1600 ºC, which exceeds the melting point of engine components. The optimal operating temperature for internal combustion engines ranges between 140 ºF and 200 ºF, making cooling a crucial aspect of engine operation. It is estimated that approximately 40% of the total heat generated is released into the atmosphere through the exhaust, 30% is dissipated through the cooling system, and the remaining 30% is used to produce power.
The cooling system in internal combustion engines plays a vital role in ensuring the engine operates efficiently and reliably. It is responsible for maintaining the engine’s temperature within the optimal range, preventing overheating that can lead to engine damage. The engine generates substantial amounts of heat during combustion, and without proper cooling, these temperatures can rise to levels that exceed the melting point of engine components. This can result in engine failure, reduced performance, and significantly shortened engine life. The primary function of the cooling system is to absorb excess heat from the engine and dissipate it into the atmosphere, keeping the engine temperature within safe limits. This allows the engine to perform at its best while avoiding costly repairs and downtime.
The cooling system works by circulating coolant through the engine block, where it absorbs heat, and then transferring this heat to the radiator, where it is cooled by airflow or a fan. There are various types of cooling systems, including air-cooled and liquid-cooled systems, each offering distinct advantages depending on the engine’s design and application. Liquid cooling systems, which are more

Introduction

Desertification is affecting the livelihoods of millions of people, mainly poor in the dry lands, which occupy nearly 41% of the Earth’s land area and are the residence of more than 2 billion people of the world. In India, the western part of Rajasthan is mostly affected by desertification process dominated by wind erosion. Kar et al. (2009) reported that 15.2 mha land in western Rajasthan is affected by wind erosion out of total 22.96 mha area under desertification. A brief account on issues and priorities related to wind erosion processes in Thar desert was reported in Santra et al. (2006). Plenty of incident solar energy in the region makes the desert surface very hot especially during summer months. Wind speed also remains very high in the region for most of the time in a year. Therefore, the loss of top fertile soils through wind erosion process is very active in the region. Eroded dust particles during severe wind erosion events commonly known as dust storms not only create the soils poor but also pose several environmental threats through generating aerosols in atmosphere. 

The productivity of agricultural ecosystems depends on the interactions and interdependence of numerous species, such as other plant species, micro-organisms, pollinators, predators of agricultural pests and livestock. Agricultural ecosystems serve as an important habitat for many plant and animal species. Wild species are sometimes used to provide valuable genetic resources, for instance for certain plant breeding. When preserved, these can help to meet future food and livestock production challenges, including adaptation to climate change. Conservation agriculture provides an ample opportunity for the maintenance of agricultural biodiversity. This paper discusses the agricultural development phases, their consequence on the environment and cropping system diversification opportunities in conservation agriculture.

Definition

“Biological pesticides”, or “Biopesticides” as the name suggests, are naturally occurring substances that biologically control harmful pests, especially among field crops. These are naturally produced bio chemical materials basically non-toxic to the environment that can be employed in pest control. Biopesticides could mean living organisms (bacteria, virus, and algae), their products (biochemicals produced by them) and also plant byproducts. Biopesticides offer an ecologically effective solution to the harmful effects of synthetic pesticides.

Abstract: Hollyhocks are seed propagated garden annuals with numerous hybrid phenotypes, series (single and bicoloured Halo series), Spotlight, Carter’s Double, Double Triumph, Giant Double Powder Puff, Halo Bush (tricoloured), Halo Mixed (eight colours) and cultivars are available in the world market. Unusual plant height, delayed flowering compared to other winter annuals handicap its popularity. While little genetic information and trait heritability has been established for this crop, breeding continues to produce new variants for commercial production. Gene pool of hollyhock exhibits great diversity. Breeding objectives with high priority include dwarf stature (2 feet height), compact growth, double and large flowered inflorescence, precocious flowering and resistance to leaf rust disease.

Abstract

Yak milk is unique as it is rich source of nutrients and is the main source of milk derived nutrition in hilly areas, where the availability of bovine milk is very limited. It is considered as a concentrated source of nutrients with a total solids (TS) content of approximately 16.9-17.7%. The nutritional profile and physico-chemical properties of yak milk is very different from that of conventional source of milk. Though, the production of yak milk and milk products is not organized and is limited to the custom of high altitude regions only. However, yak milk and milk products like churpi, kurut, orom, paneer, churkam, serkam, butter etc. are gaining attention of consumers due to their significant nutritional and therapeutic value. Owing to this, it has further increased the interest of researchers for the development of new array of yak milk based organic dairy products. Therefore, with growing demand of natural functional foods, yak milk could be valuable product to meet the demand of functional foods.

The aim of this chapter is to highlight the nutritional profile of yak milk including, amino acid profile, lipid profile and mineral composition. Yak milk based regional products are also discussed in order to provide some basic information regarding the value addition of yak milk.

Problems are low fruiting / non fruiting / irregular fruiting in the country’s litchi farming area. The potential of bear litchi has been identified as variety, although some of the bearing terminals in the present year will be more active in the next year (70-95 percent).

There are several difficulties involved with consuming and storing microgreens. Addressing low shelf life and putting into practice efficient postharvest management for microgreens provide formidable challenges for researchers. It's critical to comprehend any relationships that might exist between spoiling and human pathogen contamination. Research has indicated that microgreens including basil, lettuce, parsley, melons, and spinach can have infections from pathogens during the seed-to-harvest stage (Alegbeleye et al., 2018). Growing environments that support the growth or transfer of microorganisms, processing techniques that expose the crop to contaminants from people or animals, and physiological traits of the plant that facilitate contact and binding with microorganisms are some of the factors that contribute to this risk (Maluin et al., 2021). Because external fertilizers and manures are applied sparingly, there is little contamination even though microgreens are protected from pests and insects by controlled surroundings.

Bennett’s Hierarchy

To set the scene for this we head back to the 1970s when Claude Bennett worked as a specialist in evaluation with the extension service. He wanted to make sure that extension was collecting information that was able to illustrate the effectiveness of extension, and help extension improve its services to clients. So, he developed seven categories of criteria for evaluating extension programmes based on what he called a ‘seven link chain of events. He put these into a hierarchy literally in his article describing this-as a diagram of seven steps.

Introduction

Innovation as a new idea, method, or object may be developed by research or by a farmer. Diffusion is a special type of communication on innovations. The proper use of innovation is called adoption. Communication is different from diffusion in the sense that communication covers all types of messages whereas diffusion is concerned with a message of new ideas. The extension workers need to understand the meaning of diffusion, adoption processes, innovation, etc. by which farmers accept new ideas. Adoption is a sequence of thoughts and actions which an individual goes through before s/he finally adopts a new idea. The adoption process is a mental process for passing the new idea to final adoption. In the diffusion process, the new idea spreads from its source of invention or creation to its ultimate users or adopters. Perception is an activity through which an individual becomes aware of objects around oneself and of events taking place.

Elements in the Diffusion of Innovations

The four main elements in the diffusion of innovations are innovation, communication channels, time, and social systems.

The Innovation

Innovation is a new idea expressed in terms of knowledge, persuasion of decision for adoption. The perceived attributes of innovations are relative advantage, compatibility, complexity, trialability, and observability.

Relative advantage: The innovation should have a relative advantage over the existing ideas in terms of economic and social-prestige factors, convenience, and satisfaction. The advantage can be influenced by providing various incentives.

Compatibility: The innovation should be compatible with the socio-cultural values and beliefs of people.

The world is facing unprecedented challenges in ensuring global food security, and climate change is exacerbating these challenges. Rising temperatures, changing precipitation patterns, and increased frequency of extreme weather events are altering the dynamics of crop diseases, making them more unpredictable and difficult to manage. The consequences are dire: crop diseases can lead to significant yield losses, reduced food quality, and economic hardship for farmers. Therefore, it is imperative that we develop and implement effective strategies for managing crop diseases in the face of climate change. Weather wisdom is a critical component of these strategies. By understanding and interpreting weather patterns and their impact on crop diseases, farmers can make informed decisions about crop management, disease monitoring, and control. This approach is essential for climate-smart agriculture (CSA), which aims to promote agricultural practices that can help farmers adapt to climate change while improving agricultural productivity and sustainability. By leveraging weather wisdom, farmers can reduce crop losses, improve food quality, and enhance their resilience to climate change. This book, “Weather Wisdom for Crop Disease Management: A Requisite for Climate-Smart Agriculture,” provides a comprehensive overview of the role of weather wisdom in crop disease management. The book brings together the latest research and knowledge on the impact of weather patterns on crop diseases, as well as practical strategies for leveraging weather wisdom to manage crop diseases. The book is designed to serve as a resource for farmers, extension agents, researchers, and policymakers who are interested in promoting climate-resilient crop disease management practices.
1.1 Role of Weather in Disease Managemènt
Weather plays a crucial role in the occurrence and spread of crop diseases. The development and dissemination of plant pathogens are significantly influenced by weather conditions such as temperature, humidity, wind, and precipitation (Fig 1.1). A climate change may alter the life cycle, survival, virulence and even genetics of a plant pathogen. Favorable environmental conditions are always a prerequisite for a pathogen to establish pathogenicity. Temperature is a critical factor in the development of crop diseases. Optimal temperatures vary among different pathogens, and temperatures that are either

Male sterility is a situation where the male reproductive parts of a plant are either absent, aborted, or non-functional; and therefore, they fail to participate in the process of natural sexual reproduction. This situation generally arises due to some developmental defect that occurs at any stage of microsporogenesis (process of development or release of pollen grains) in the plants. Since male sterility is the manifestation of abnormal growth and development and can occur at any point of time, the action of genes controlling male sterility is also be variable and inconsistent across the genotypes. Based on the type of malfunctioning of androecium, the male sterility systems have been classified as structural (absence or deformity of anthers), sporogenous (defective microsporogenesis), and functional (failure of mature pollen to germinate). In addition, on the basis of genetic control mechanism of the male sterility, it has also been classified as genetic, cytoplasmic, and cytoplasmic nuclear (or genetic) male sterility. With respect to utilization of male sterility in crop breeding, it is essential that individuals with altered male fertility keep their female fertility intact. The fertilization of such plants takes place with pollen grains from other plant that is transferred with the help of external agencies such as wind, insects, or human beings.

Alimentary canal : The endoderm is formed by delamination in mammals and birds. This endoderm surrounded by splanchnic mesoderm forms the gut. The endoderm underlying the embryonic disc and serving as a flat roof to the early yolk sac becomes gut endoderm. At 20^th day a rapidly expanding embryonic disc begins to fold into a cylindrical embryo. The gut endoderm also participates as a component layer. Folding first into the head end and then into the hind end of elongating embryo this endoderm necessarily takes the form of the two internal blind tubes. The open end of the each tube where it becomes continuous with the yolk sac is called an intestinal portal while the tubes are named the foregut and hindgut. The caudal end of the hindgut is cloaca. An intermediate region opening ventrally into the yolk sac through the narrower yolk stalk is midgut.

Mole

A mole is defined as the amount of chemical substance containing exactly 6.022 140 76 × 10₂₃ numbers of constitutive particles such as atoms, ions and molecules. This number is a fundamental constant named Avogadro’s number in honor of Italian scientist Amedeo Avogadro. This constant is properly reported with an explicit unit of “per mole,” and rounded version being 6.022 × 10₂₃/mol.

This definition has been adopted since November, 2018 revising the old definition based on the number of atoms in a sample of pure ₁₂C weighing exactly 12 g. Thus, as per the definition, 1 mole of any element contains the same number of atoms as 1 mole of any other element. However, the mass of 1 mole of a particular element is different from that of another element.

Molar mass

Molar mass of an element (or compound) is the mass in grams of 1 mole of that substance, a property expressed in units of grams per mole (g/mol).

12.1. Instruments panel

12.1.1. Oil pressure gauge

Indicates oil pressure in Kgf/cm²

Abstract

Now-a-days non bovine milk become an area of interest for their potential to provide nutrients along with beneficial health effects. Deer belongs to cervidae family, is one of the source of non bovine milk. Two thousand years ago, the people of Soviet Union along the borders of Russia, Mongolia, and China used to consume deer milk and milk product. Deer milk is a plentiful source of milk solids. The proteins of deer milk is more digestible than bovine milk owing to their unique profile and characteristics. Deer milk being rich in highly digestible protein offers beneficial health effect through bioactive peptide production. The distinctive physico-chemical properties being quite similar to sheep milk shows the milk product manufacturers a scope to use deer milk for production of various dairy products. Although there is immense opportunity to use deer milk for development of diversified functional products, further research work is needed to be carry out to find out the type of biopeptides produced during protein hydrolysis, role of fatty acids, effect of different unit processing on its constituents etc. This chapter delineates the nutritional profile and physico-chemical properties of deer milk along with the significance of it in terms of its therapeutic roles and potential to be used for product development.