eChapters

Nucleic acids are complex, chain-like polymers consisting of nucleotides as their monomers. Due to this characteristic, they are often referred to as polynucleotides. The largest molecules present in the biological system are nucleic acids. The two main types of nucleic acids are DNA (deoxyribonucleic acid) and RNA (ribonucleic acid). The bulk of DNA is confined to the nucleus and some cell organelles like mitochondria and chloroplast. RNA is found in both the nucleus and cytoplasm. In 1869, Johannes Friedrich Miescher isolated a substance from the nuclei of the pus cell (leukocytes). The extracted material was named nuclein, which contained an unusually large amount of phosphorus; in addition to proteins, and devoid of sulfur. Richard Altman later named the nuclein as nucleic acid. These organic molecules are found in living cells and play a crucial role in transmitting genetic information from one generation to another.

Nucleotides

Nucleotides serve as the fundamental constituents of nucleic acids. Nucleotides have flat planar and heterocyclic origin. Nucleotides are small molecules composed of three components:

1. Nitrogenous base,

2. Pentose sugar and

3. Phosphate group.

Abstract
This chapter explores the current landscape and future potential of agricultural exports from Bihar, a state with significant agrarian strengths yet modest global trade participation. Despite contributing robustly to India’s production of fruits, vegetables, rice, and livestock, Bihar’s share in national exports remains below 1%. The chapter presents a comprehensive analysis of Bihar’s agricultural export trends, identifying key commodities such as Shahi Litchi, Katarni Rice, Jardalu mangoes, and millets and highlights emerging opportunities through Geographical Indication (GI) tags and high-value crops. A SWOT analysis underscores Bihar’s strategic advantages, such as fertile soil and agro-climatic diversity, alongside weaknesses like infrastructure deficits, low market integration and poor access to export logistics. The chapter further outlines key threats such as flood prone regions, poor irrigation infrastructure, and limited cold storage capacity, while also examining growth potential through investment in multimodal transport, agriprocessing zones, and farmer training. Policy suggestions include the development of export policies financial incentives and SEZs to boost Bihar’s export readiness. Overall, the chapter emphasizes the importance of targeted strategies to transform Bihar into a competitive agri-export hub benefiting smallholder farmers and enhancing rural livelihoods.
Keywords: Bihar Economy, Geographical Indications, Export Infrastructure, Agri-Export Policy and SWOT Analysis

Molecular characterization involves the use of techniques that are available to analyze variation in plants and animals at the DNA level. Differences in gene sequences can be directly observed and described with a precision previously impossible to achieve. Many of the techniques that have been developed have already been used in evolutionary and taxonomic studies. They have immense value in studies of accessions identity and for the detection of novel useful variation in the plant germplasm. Molecular markers provide genetic information of direct value in key areas of conservation both ex situ and in situ. For ex situ conservation the key issues are:

Through green revolution, we have developed high yielding varieties albeit with high nutrient requirements putting much more reliance on chemical fertilizers. The major challenge facing plant biology right now is to improve crop production and to feed an expanding world population. This is against a background of pressure on agricultural land use and climate change having negative impacts on growing conditions. The adverse effects of agriculture, and specifically fertilizer use, include damage to the environment, a large carbon footprint for the manufacture and use of agrochemicals, and the utilization of non-renewable resources. One solution is to increase the area of land for agriculture, as well as increasing production while maintaining the current rate of inputs; however, this is predicted to have substantial negative impacts on the environment (Tilman et al., 2002), is unsustainable in terms of phosphate use, and would have a huge economic footprint in terms of energy demands for nitrogenous fertilizer production. The challenge is to increase yield, decrease inputs, and improve resistance to abiotic and biotic stresses. Improving crop nutrient use efficiency ideally requires an understanding of the whole system, from the macro (agro-ecosystem) to the molecular level.

World-wide, both in developing and in developed countries;family farming is one of the most predominant forms of agriculture. It includes a wide spectrum of farm sizes and types. In high-income economies, it ranges from very large land holdings that are easily cultivated by one or two family members with the use of labour-saving machinery and hired labour. In low-income economies,with small holdings of a few hectares or less and that are often oriented towards subsistence with low marketable surplus.

Temperature influences most plant processes, including photosynthesis, transpiration, respiration, germination, flowering, adaptation and distribution of crops. As temperature increases (up to a point), photosynthesis, transpiration, and respiration increase. When combined with day-length, temperature also affects the change from vegetative (leafy) to reproductive (flowering) growth. Depending on the situation and the specific plant, the effect of temperature can either speed up or slow down this transition.

Temperature is the measure of mean kinetic energy per molecule of the molecules in an object, while the heat is the measure of total kinetic energy of all the molecules of that object. A large object may  have a much lower temperature than a small object and may still have greater heat content by virtue of larger number of molecules in it. Thus heat and temperature are not the same.

Introduction

Stress is usually defined as an external factor that exerts a disadvantageous influence on the plant. In most cases, stress is measured in relation to plant survival, crop yield, biomass accumulation or the primary assimilation processes (CO₂ and mineral uptake), which are related to overall growth. Stresses can be biotic, imposed by other organisms or abiotic arising from an excess or deficit in the physical or chemical environment. Biotic stress arises by attack of bacteria, viruses, fungi, invertebrates and even other plants, whereas abiotic stress occurs due to drought, water logging, high or low temperatures, excessive soil salinity, imbalance of mineral nutrients in the soil, heavy metals and too much or too little light. Stresses trigger wide range of plant responses, from altered gene expression and cellular metabolism to changes in growth rates and crop yields.

Abstract

Geomorphology not only provides the panorama on the external architecture of the Earth surface, but also it is the record of the past geological events including the climate, especially of the Quaternary period. Detailed geomorphology map was prepared using the IRS LISS IV FCC and SRTM data showing the tectonic, denudational and fluvial landforms of Kollai hill, Eastern Ghats, Tamil Nadu. The geomorphic features showed that the Kollai hill can be divided into two as northern and southern blocks separated by a NE-SW active sinistral fault in the overall N-S rectangular hill. The integration all the geological , structural and geomorphic features show that the Kolli hill is under the grip of uplift in the south west with hinge towards north easterly. Because of this, the northern block/rim of the hill is fragmented into a series of East-West trending fracture/ fault swarms which are sympathetic tectonic grains to the Attur graben rimming the Kollai hill to its north. This phenomenon seems to control the overall resources and environment of the hill.

Introduction

The mountains are not only the store houses of natural resources like minerals, water, geothermal springs, forest & biomass etc., but also possesses unique & self-styled ecosystems drafting the mankind from the plains for comfort and livelihood. Further, the tourists are highly attracted by the mountain regions due to the ecosystems, climate and scenic beauty. Due to all these, the resources of the mountains are exponentially exploited during the recent 6–7 decades thus causing phenomenal depletion of natural resources and initiation of chains of environmental disorders, viz., deforestation triggered soil erosion, landslides, debris dumping along the slopes and foot hills, sedimentation of the downhill reservoirs & drainages, all of which in turn induce haphazard flooding. Hence, the Union and various Federal Governments have started working on the restoration of the ecosystems of their respective mountain regions in several nations. In the Indian sub- continent too, both under the Centrally sponsored schemes and the State funding, number of Hill Area Development Programmes have been initiated and going on especially in Himalayas, Easternghats and Westernghats. The state of Tamil Nadu possesses both Easternghats and Westernghats. While the Westernghats are found along the western part of the state with NNW-SSE orientation, the Easternghats represented by the Kollai- Pachhamalai hills, Shevroy - Chitteri – Kalrayan hills and Javadi hills, aligned in N-S direction, are traversing the Central part of Tamil Nadu. To comprehensively understand the resources, hazards potential, the ecosystems and also the modern geological processes which only control and tutor them, a geomatics based study was carried out in Kollai hills so that it can be used as a reference study to all those who are engaged in eco-restoration and hill area development programmes in India.

Abstract

The use of biosensors is growing in the food industry as a means to ensure food safety and quality because of its versatility in determining biological compounds. It is defined as analytical technique used for detection of analyte that combines a biological component with a physico-chemical detector. The most important contribution of biosensors in the food sectors is to control production processes and ensure food quality and safety by reliable, fast and cost effective procedures. Biosensors have been useful for the evaluation of food composition, particularly in functional food products fortified with phytochemicals, vitamins and minerals.. Biosensors are replacing conventional analytical tools since they offer advantages in size, cost, specificity, rapid response, precision and sensitivity. Future progress in the biosensor technology involves the development of nutraceutical release technology within packaging material where it can be used to trigger the controllable release of bioactive components and targeted delivery of protective agents into the food product. The growing consumer demands for safe and quality food has led the food industries to search for quick and reliable methods for which the applications of the biosensor technique in the field of food processing and quality control are found to be promising.

Introduction

India, only occupies 3.29 million km² bounded geographical areas, which forms 2.4% of the world’s land acreage area; it support over 15% of the world’s population. The population of India as on 1 March 2016 stood at 1332 billion. Thus, India supports about 1/ 6th of world population, 1/50th of world’s land acreage and 1/25th of world’s water resources. The country as well has a livestock population of 500 million, which is about 20% of the world’s absolute livestock population. More than half of these are cattle, forming basic the backbone of Indian agriculture. The absolute accessible water assets of the country are adjourned as 1086 km³. Total bounded breadth of alone Eastern India occupies 28% of country’s absolute breadth of 328.73 m ha. The share of forest area to geographical area ranges from 33 to 54% for North Eastern hill states, in Assam. The per capita land availability decreased from 0.50 ha in 1981 to 0.33 ha in 2000 due to proportionate increase of land use for non-agriculture purpose and increasing population density. Rice, maize, wheat, rapeseeds, groundnut, pulses, sugarcane, potato, jute, jowar and bajra are the major crops grown in this region amongst which rice is the principle crop. India has a long history of agriculture since civilization. Then the agriculture was based on traditional practices and the local varieties were being grown without much care. Population densities usually didn’t pose much difficulty to supply food grains. Rice both under low/up land ecosystem is primarily grown under rainfed conditions having production constraints of entirely opposite in nature. Very low productivity under rainfed eco-system is mainly due to yield depressing factors caused by biotic stresses across the rice ecology, either resulted from excess or deficit water due to uneven and erratic distribution of annual rainfall. The cropping intensities in the states like Assam, Bihar, MP, Orissa, UP and West Bengal are 137.7, 137.8, 125.6, 154.6, 148.6 and 159.6 per cent, respectively. This indicated that a vast majority of lands remain fallow during dry (winter/rabi)season due to lack of proper technologies, which are under rainfed conditions, specifically lack of available moisture and or rainfall during this period. That is more than half of the arable land remains fallow during rainless period. Increasing cropping intensities in rainfed uplands is not easily achievable but there is great potential of intensification of cropping in rainfed lowland by utilizing natural resources and conserved residual moisture. Pulses like black gram, green gram, lentil, lathyrus, chick pea and oilseeds like linseed, groundnut, and rapeseed could not only increase the cropping intensities but also come forward to increase national productivity. Adoption of improved crop cultivars, cropping system, increasing cropping intensities, precision farming can hold good to get out of this situation where whole system is to be considered.

Cost-effective farming systems for spices cultivation for increasing production and productivity in different agro ecologies have been developed.

An organic package for production of black pepper, ginger and turmeric by applying farmyard manure, vermicompost, ash, rock phosphate, Azospirillum sp. and phosphobacteria and Trichoderma sp. and Pseudomonas sp. as biocontrol agents for disease control was developed. Further, a foliar spray of 1% solution of complex fertilizer 19 : 19 : 19 (N : P : K) during spike initiation period (April second week, May first week and May fourth week) during lean cropping season under irrigated condition enhanced black pepper (cv. Panniyur I) yield by 20–25%. Soil application of zinc up to 10 kg/ ha or foliar spraying of ZnSO4 (0.25%) and Borax (0.2%) twice (60 and 90 days after planting) was recommended for higher yield and quality for turmeric in zinc and boron deficient soil.

Among all the treatments, sprinkler and drip irrigation methods caused early sprouting; early flowering with increased plant height and more number of leaves and flowers/plant as compared to the control (rainfed). Also, stiga fresh weight, dry weight, length and saffron yield were improved in sprinkler and drip irrigation methods over the control. Raised beds resulted in early sprouting, early flowering with increased plant height and more number of leaves and flowers/plant.

Matrix is a rectangular array of numbers arranged in rows and columns. The order of a matrix is written as r x c, where r is the no. of rows and c is the no. of columns. The numbers included in a matrix are called elements of the matrix. The name of the matrix is denoted by an uppercase English alphabet.

Introduction

‘Infrastructure’ connotes physical assets. The meaning may differ based on the sector under which the term is in use. More often, it has been used to describe the public as-sets that facilitate production. Historically, Lewis (1955) included public utilities, ports, water supply and electricity as infrastructure, whereas Hirschman (1958) outlined four conditions that characterise infrastructure or social overhead capital: the services provided to facilitate or are basic to economic activity; the services are usually public goods because of economic externalities; these services cannot be imported; these investments tend to be indivisible or ‘lumpy’. 

Nanotechnology
Nanotechnology is the study and manipulation of matter at the nanoscale, where unique phenomena allow for novel applications. Nanotechnology is the utilization of components smaller than 100 nanometers for manufacturing and bio-fabrication. This adaptable technique had a wide range of uses, from clothing manufacture to medical advancements such as cancer detection and treatment, among others. The name “nano” comes from Greek, which meaning incredibly small, and a nanometer (nm) is equal to 10 -9 m. Nanotechnology, also called as Molecular Manufacturing based Nanotechnology (MNT) as it involves experimentation and manipulating of nano particles, in order to design and build materials and devices with the basic structure in the nanometer scale. Nano material which can exist in the form of powder or liquid, exhibits significantly different physical and chemical properties at nanoscales compared to their micro size materials with similar chemical composition. Nano food refers to food in nanoparticles, nanotechnology techniques or tools are used during cultivation, production, processing, or packaging of the food.
The development of both organic and inorganic materials achieved through conversion and manipulation of the materials on an atomic and molecular scale [Grumezescu et al., 2018; Dera & Teseme, 2020]. By reducing the particle size below its outset to approximately 1–100 nm, the physical and chemical properties of the materials significantly differed when compared to the original materials despite they contain the same base materials. The unique
and incomparable properties of nanoscale materials are arise due to their high surface area-to-volume ratio compared to the microscale of the same materials [Grumezescu et al., 2018, Berekaa, 2015].

Introduction
Informative speaking is a powerful form of communication that seeks to educate an audience on a particular topic, idea, or issue. Unlike persuasive or entertaining speech, the primary purpose of informative speaking is to provide knowledge and clarity. It equips listeners with valuable insights, broadening their understanding and perspectives. Mastery of informative speaking is crucial in educational, professional, and public contexts, as it fosters informed decision-making and nurtures curiosity.
The Purpose of Informative Speaking
The primary purpose of informative speaking is to educate an audience by sharing knowledge, clarifying concepts, or explaining processes. It seeks to enhance understanding rather than to persuade or entertain. Below are the core purposes of informative speaking:
1. To Educate
Informative speaking helps an audience gain a deeper understanding of a topic by presenting facts, data, and research. This could involve teaching something new, offering insights into complex issues, or updating the audience on current trends.
Example: A presentation on the basics of block-chain technology explains how it works and its potential applications in finance and beyond.

Strategic partnerships and productive outreach play a crucial role for new technologies to successfully reach the market, drive growth, and strengthen a country’s global competitiveness, Outreach programs have various benefits, ranging from technology transfer awareness, communication of stakeholders, industry, government, to academy partnership promotions. These efforts help in establishing connections, communicating opportunities, and encouraging active engagement from key stakeholders. Outreach activities can be performed under two broad categories:
1. Written communication includes all communication which can be viewed, shared, or made accessible for a set of people in a passive manner. This includes reports, newsletters, guidance, and online content which provide insights of worth for stakeholders.
2. Human outreach includes all direct communication like c face-to-face or verbal form communication it included conferences, conventions, workshops, seminars and personal communication with industry leaders.
The type of outreach creates stronger, more personal connections. An effective outreach strategy usually combines both human and written outreach efforts. By following this strategy TTOs can expand and strengthen partnerships, and make it easier for research-led innovations to get transition from lab to market more effectively. This chapter explores key outreach models, strategic networking approaches, and proven practices for building impactful partnerships in technology transfer.

Abstract

Vegetable cultivation has been threatened due to limited availability of arable land and frequent vagaries of environment and incidence of soil borne pests and diseases. Development of stress tolerant or climate smart cultivars through conventional breeding methods or dependence upon agrochemicals for mitigation of pest and disease problems for vegetable crops have been practised since time immemorial. Salinity in coastal belts, high or low temperature injury, bacterial wilt in solanaceous vegetables, Fusarium wilt and nematode infestation in cucurbits are common of the many maladies which have caused tremendous loss in productivity and quality of vegetable crops throughout the globe. 

The extreme weather events being experienced at a greater frequency now a days are due to accelerated climate change caused mostly due to global warming. Global warming is basically a change in the climatic conditions of the Earth, brought about by a considerable rise in the near-surface temperature of the planet. Earth’s surface and the troposphere become warmer due to absorption of infrared radiation emitted by the Earth’s surface by Green House Gases(GHGs). The important green house gases include carbon dioxide(CO₂),methane(CH₄) nitrous oxide(N₂O), chloro-?uoro-carbons(CFCs), ozone(O₃) and water vapour(H₂O). Various climate models predict major changes in our weather patterns, environment, and way of life in absence of efforts for substantial reductions in GHG emissions. The CO₂ gas concentration of atmosphere has increased to 385 ppm as against the normal concentration of 300 ppm. The atmosphere contains only 1 % of the total global carbon pool. The undesirable changes can be reversed by increasing soil and eco system carbon pools, increasing mean resident time(MRT) of sequestered carbon and decreasing GHG emission to atmosphere.