eChapters

In India farming was traditionally subsistence in nature but with the passage of time, the nature of farming has changed to commercialized system faming. With the commercialization of farming, price of the product along with its quality has become an important factor in marketing. Quality and safety issues have also gradually gained importance as people in general have become conscious and aware of the hygiene, health and safety issues related food and food products. Perishability of food items requires more emphasis on its quality and safety. The formal system of regulations in quality and safety standard has been mainly the contribution of the developed world. The International market has set a high standard of quality and safety of agriculture products. In the country the standardization of quality and safety of agricultural products has gained momentum in the last 10-15 years.

Introduction

Agriculture is an important sector for countries like India, who have majority of its population, directly or indirectly depend upon agriculture. The sector which feeds the majority of population of any country needs special attention for its all round development. Marketing is such a crucial aspect related to agriculture that is probably not developed in any of such countries which largely depends upon agriculture. Underdeveloped and lack of resources are the main reasons behind the underdeveloped nature of agricultural marketing. In simple terms, agricultural marketing means the buying and selling of agricultural produce. The Indian council of Agricultural Research defined involvement of three important functions, namely assembling, preparation for consumption and distribution.

Food, clothing and housing are the three basic needs of a man. After that the additional requirement of a man are personal health and happiness. These can be considered as human factors. The material factors are agriculture, industry, trade, water resources management, insurance.

The continuous increase in population made the planners, researchers and cultivators to increase the food production to feed all the people. So, the second green revolution has to follow. Due to increase in air temperature and climate change, the cultivation practices to change based on the changing climatic condition. The study of climate is not only necessary for food production, but also needed for transportation, storage, value addition and consumption.

The need of the cloth for man is not only for style. The basic need is to protecting the human body from the climatic factors like heat and cold. Clothing must provide to maintain the body heat at about 37^oC. Clothing must be made based on the local climatic condition. So, the traditional fiber for making the cloth is better for health.

Housing provides the internal controlled climate to the human being. It provides comfort to the inhabitants. Like clothing traditional styles, sites and methods of housing have to be followed based on the climatic condition. Though people are living in the multi-storied building, they have to concentrate on comfort in the case of sufficient aeration and ventilation. In India, the Vastu Sastrum is nothing, but it provides the needs of the human livings for their comfort with sufficient light and air.

The climatic factors for a particular day are not similar to previous day. Similarly, definitely the climate of one season is not similar to other season. Man needs some recreation in the comfort climatic areas. So, he/she needs cool climate for stay that necessitate to air conditioner particularly during summer.

Potato is a major food crop, grown in more than 100 countries in the world and it is one of the major commercial crops grown in India. India ranks third by contributing around 7.5% to the world’s production. During 2006-07, 27 million tonnes was produced in an area of about 1.5 million ha. However, potato consumption per capita in India (14.8 kg/head/year) is one of the lowest in the world and hardly one per cent of the potato is processed.

All over the world, when people get richer their life style change and they consume more animal protein, especially meat. We may add value by good genetics and know how in farm and feed management. There would be huge demand for poultry products and meat in coming years in India as per capita income of middle class people is gradually increasing and for that production of meat and meat products is required to be increased to meet the demand. Meat of goat, buffalo chicken are generally sold in India. Marketing of meat and meat products, chicken and poultry products such as eggs are the main challenges for the new farmers as there is no ready market in India. Recently there is huge demand of Chicken in Northern India. The initial problem faced by farmers is getting the special chicken feed for the different age groups. There is no well equipped dedicated slaughter house available in every city. New technology for animal slaughter is required so that all parts of animal are used properly without losing valuable protein. The idea should be to use innovated technology to optimize the profits in the chain.

Taxonomy is the science of identifying (discovering), describing, naming and classifying organisms. It is a complex summing up of knowledge starting with thorough analysis to base the synthesis that will end up in the name of a taxon. Correct identification of biological taxa is a necessary prerequisite to all other enquiries about the biological world. Taxonomists attempt to divide the world of living things (biodiversity) into distinguishable entities (taxa-such as species, genera, and families), develop tools (e.g., identification keys) to allow others to recognize and identify these taxa, and organize the described taxa within a hierarchical classification system that reflects evolutionary relationships. The outcomes of taxonomy are, therefore, very practical in terms of providing tools to facilitate identification, an infrastructure for organizing biological information, and a universal language for communicating information about the identity and classification of biological entities. Thus, naming and ordering of objects into groups is probably the most fundamental step in the development of scientific principles. Taxonomy identifies and enumerates the components of biological diversity providing basic knowledge underpinning pest management (Ramaraju and Pratheep, 2008). 

Botanical Name : Anacardium occidentale L.
Family : Anacardiaceae 
Origin : North East Brazil in Latin America. 
Chromosome No. : 2n=2x=42
Type of fruit : Droup. 
Type of Inflorescence : Panicles (Both male and  hermaphrodite flowers occur on the same inflorescence)

Botanical Name: Hevea brasiliensis
Family: Euphorbiacace
Origin: Brazil
Chromosome No.: 36
Useful Part: Latex 
Cera Rubber: Manihot glaziovii
Para Rubber: Hevea brasiliensis
Indian Rubber: Ficus elastic
Panama Rubber: Castiolla elastic
Guayul Rubber: Parthenium argentatum

Two species mostly grown worldwide

Grape cultivation is one of the most remunerative farming enterprises in India. Considered the “Food of Gods” by the ancients, the little juicy ball holds more mysteries than we can think of. Classified by biologists as a ‘true’ berry, it has fleshy insides all the way to the tiny seed, making it a strong powerhouse of nutrition and energy. As one of nature’s richest source of antioxidants, the grape is priceless in its nutritional value. In fact many dieticians believe that it helps lower the incidence of two of the deadliest diseases in the urban world- coronary disease and cancer. In its juice form, the grape is known to cleanse the liver and remove excess uric acid from the body. One interesting but little known fact is that grape seeds are healthier than the fruit itself. They contain powerful antioxidants serving to prevent premature ageing, disease and decay. Grapes, one of the most delicious fruits, are rich sources of vitamins A, C, and B6. In addition to this they contain essential minerals like potassium, calcium, iron, phosphorus and magnesium.

3.1. Growth Analysis

Growth and development analysis of plants provides information related to influence of various factors either negative or positive on plant growth. The basic idea of this analysis is the estimation of crop growth at various stages and finally towards the yield. It will help us to understand the performance of a genotype as well as impact of agronomic practices on the crop at any stage of growth and also on final yield. This would also identify the factors responsible for high yield and thereby provide the basis to tailor agronomic practices. The most common parameters used in growth analysis are leaf area index, crop growth rate, relative growth rate, net assimilation rate and leaf area duration.

Weed management practices are evaluated for its efficiency in terms of effective control of weeds and economics of control measures through various indices under sole crop situation as well as intercrop situation.

6.1. Indices for Sole Crop Situation

The absolute effect of particular method or a chemical in reducing the weed competitions and increasing the crop productivity are measured effectively by various indices. The comparisons of weed control methods are usually based on the yield, weed population and weed dry matter from the control as well as treated plots.

Herbicides are the chemical substances used to kill weeds, i.e., unwanted plants that compete with crop plants for soil nutrients. Chemical herbicides are the most effective immediate solution to most weed problems. Use of chemicals, however, can be harmful to wildlife, to the environment and to humans. Chemicals are also expensive, and weeds develop resistance to the chemicals. For these reasons, there is now a move toward alternative methods of controlling the weeds. One of the most promising is biological weed control, which involves using one living organism to control the activities of another organism.

1. Damping off
Pathogen
Pythium spp
Phytophthora spp
Fusarium spp
Sclerotium spp
Symptoms
It is a term used to describe the damage caused by various fungi to the seed and emerging seedling in the reduced plant stand and sometimes it is so serious that  resowing becomes inevitable. Major symptoms are the failure of the seedlings decay or sudden death of the emerged seedlings roots and lower stems of emerged seedlings become soft and watery and may be reddish brown in colour.

Introduction

The climatic elements such as solar radiation, temperature, precipitation, humidity, evaporation, evapotranspiration and wind velocity affect growth and development of saplings. These climatic factors are not favourable for successful propagation of various horticultural crops in arid region. The main climatic features of Indian hot arid agro-ecosystem is high wind speed, sand storm and high temperature during summers up to 48-50oC  and during winter season temperature falls to the 2-3^°C, low atmospheric humidity i.e. 20-30% during maximum period of the year. Moreover the relative humidity goes down to below 10 per cent during summer months.

Land, a non-renewable resource, is central to all primary production systems. Over the years, the country’s landmass has suffered from different types of degradations. Land degradation can be defined as lowering of land productivity due to the deterioration of land’s physical, chemical and biological condition. Physical land degradation is due to water erosion, wind erosion, compaction, crusting and water logging and chemical degradation is due to the processes of salinization, alkalization, acidification and nutrient depletion. Biological degradation is due to the reduction of soil biota and organic matter, degradation of vegetation and impairment of activities of microflora and fauna. Land degradation is steadily increasing due to the growing pressure on land and unsustainable land use. Land degradation and the associated loss of soil productivity and quality is of great concern both from food production and environmental conservation point of view. An ever-increasing population created enormous pressure on land resources.

Introduction

Canopy management is the manipulation of tree canopies to optimize the production of quality fruits. The canopy management, particularly its components like tree training and pruning, affects the quantity of sunlight intercepted by trees, as tree shape determines the presentation of leaf area to incoming radiation. An ideal training strategy centers around the arrangement of plant parts, especially, to develop a better plant architecture that optimizes the utilization of sunlight and promotes productivity. Light is critical to growth and development of trees and their fruits.

Introduction

In-spite of environmental, bio-physical and resource constraints in most parts of Rajasthan, the state can be classified into three distinct agro-climatic zones namely hot arid, semi-arid and sub-humid  from horticultural perspective. These diverse zones have excellent vegetable production potential with wide range of crops, varied opportunities and resource utilization. The extremes of high (March–October) and low (December–January) temperature conditions together with associated abiotic stresses in the hot arid and semi-arid regions limit the choice of crops and their genotypes, quality of produce and productivity. Vegetable exploitation with adaptive and native crop-plant species is generally found to be potential and stable under arid to semi-arid agro-climatic conditions of the state that receive 150–650 mm of rainfall and having abiotic stresses due to climatic variations, drought, frost, hot and cold winds, soil and water quality.

Continuous vegetable cultivation year round in the limited available land, without adopting crop rotation practices induces stress, which leads to low vegetable crop productivity. These conditions apart from building up soil-borne pathogens will also lead to other deleterious factors such as temperature extremes, flooding, drought, salinity, heavy metal contamination, insufficient nutrient uptake, soil pH stress, etc. causing severe crop loss. To overcome these abiotic stress conditions, grafting is an environmentally friendly technique for reducing losses in production in solanaceous and cucurbitaceous vegetable crops. The cultivated area of grafted Solanaceae and Cucurbitaceae has increased tremendously in recent years because the objective of grafting has been greatly expanded (Lee et al., 2010) to reduce infections by soil-borne pathogens and to enhance the tolerance against abiotic stresses.

Introduction

The hot arid zones of the country are spread over 32 million ha in the state of Rajasthan (61%), Gujarat (20%), Andhra Pradesh (7%), Punjab (5%), Haryana (4%), Karnataka (3%) and Maharashtra (0.4%), in addition to the cold deserts in the states of Jammu and Kashmir and Himachal Pradesh which are characterized by hostile agro-climate and fragile eco-system. In Rajasthan, the hot arid zone covers 12 district of whole western Rajasthan. It covers the 61 % area of the Rajasthan State and characterized by an annual rainfall between 100 – 500 mm with a coefficient of variation (CV) varying from 40 – 70 per cent; low and erratic rainfall combined with extremes of temperature (450-500 cal/cm2/day); low relative humidity; high potential evapo-transpiration value ranging from 1600 mm in eastern part and 1800 mm in western part of the region.