eChapters

18.1 Introduction

Nano – Science & Technology is design, fabrication and application of nanostructures or nanomaterials, and the fundamental understanding of the relationships between physical properties or phenomena and material dimensions at nano meter scales.

17.1 Introduction

In industrialized nations the air is filled with numerous pollutants caused by human activity or industrial processes, such as carbon monoxide (CO), chlorofluorocarbons (CFC), heavy metals (arsenic, chromium, lead, cadmium, mercury, zinc), hydrocarbons, nitrogen oxides, organic chemicals (volatile organic compounds, known as VOCs, and dioxins), sulphur and other particulates. The presence of nitrogen and sulphur oxide in the air generates acid rain that infiltrates and contaminates the soil. The high levels of nitrogen and sulphur oxide in the atmosphere are mainly due to human activities, particularly burning of oil, coal and gas. Only a small portion comes from natural processes such as volcanic action and decay of soil bacteria. Water pollution is caused by numerous factors, including sewage, oil spills, leaking of fertilisers, herbicides and pesticides from land, by-products from manufacturing and extracted or burned fossil fuels.

16.1 Introduction

The stabilization of ultra fine as nano-particles in suspension is very important for both controlling the particle size and for developing process based application of these suspensions to achieve a desired result. Generally, two approaches, namely, Top Down and Bottom-Up approaches are followed for the preparation of ultra fine or nano particles. In the Top-Down method, production starts from the micro-scale and the particles size is reduced to nano-size through repeated impact and collision in high-energy ball mills. However, controlling of size, morphology, surface properties and electrostatic charge is often difficult. In the Bottom-up approach, production of nano-particles starts with the individual atoms and building up to a nano-structure by chemical processes.

15.1 Introduction

It is important that we understand some terms like clay, mineral, clay mineral, activated clay, and nanocomposite clearly. In fact, “clay” is a soil separate consisting of particles of <2 µm (equivalent to <0.002 mm) in equivalent diameter (Brady & Weil, 2002; pages 18-19) in both USDA and International systems. While in nanotechnology, uniqueness of micro- and nana- aggregates is of crucial consideration. (In Chapter 8: The Colloidal Fraction (Brady & Weil, 2002) size dimensions of minerals are given eliminating any chance of confusion.) Now let us look at some definitions provided in the Glossary of the Clay Minerals Society (CMS) Nomenclature Committee – Clay Science Project (www.clay.org; August 2011).

14.1 Introduction

The fast growing field of nanotechnology presents great potential to influence various sectors in the areas of energy, environment, agriculture, health care and consumer goods. To overcome the demanding need of nano-based applications, various strategies to synthesize nanoparticles have been attempted. The major focus is to synthesize nanoparticles of desirable properties such as shape, size and compositions. Various strategies have been employed to synthesize nanoparticles. Foremost among these are physical and chemical methods which include sol-gel technique, solvothermal synthesis, chemical reduction, laser ablation and inert gas condensation. But altogether they suffer from process limitations like difficulty in controlling experimental conditions, feeble reproducibility, polydispersity, costly instrumentation and recovery as well as energy intensive and eco-hazardous processes. However, various factors like cost, speed, efficiency, biocompatibility etc. are still not concerned. Thus, finding a balance between scalability, price and applicability is still a true challenge. These limitations can be potentially overcome by using biological methods for nanoparticle synthesis.

13.1 Introduction and Physical Principles

A microscope is a tool that enables the user to see objects at a magnification greater than the actual specimen. Resolution and magnifying power are the two integral aspects of microscopy. Resolution is a measure of capability of an image forming system to separate images of adjacent objects. The resolving power (8) is numerically defined as d = 0.61l/n sin a, where,  l is the wavelength of the light, n is the index of refraction of the medium between the specimen and lens, a is half the angle of the cone of light from the specimen plane accepted by the front surface of lens and n sin a is the numerical aperture (NA). The NA represents the light gathering power of the lens aperture or in other words, the measure of obliquity of rays which the lens can accept and utlilize and is limited by blurring of image due to spherical aberration of the lens.

12.1 Introduction

“Precision farming,” also known as site-specific management, describes a bundle of new information technologies applied to the management of large-scale, commercial agriculture. Precision farming technologies include, for example: personal computers, satellite-positioning systems, geographic information systems, automated machine guidance, remote sensing devices and telecommunications. If they function as designed, ubiquitous wireless sensors will become an essential tool for bringing this vision of precision farming to maturity.

11.1 Introduction

Nanotechnology is the manipulation or self-assembly of individual atoms, molecules, or molecular clusters into structures to create materials and devices with new or vastly different properties. Nanotechnology can work from the top down (which means reducing the size of the smallest structures to the nanoscale e.g. photonics applications in nanoelectronics and nanoengineering) or the bottom up (which involves manipulating individual atoms and molecules into nanostructures and more closely resembles chemistry or biology). The definition of nanotechnology is based on the prefix “nano” which is from the Greek word meaning “dwarf”. In more technical terms, the word “nano” means 10-9, or one billionth of something. It is a very promising new branch of small-scale technology named for the unit of measure at which it operates: the nanometer. Nanotechnology enables us to create functional materials, devices, and systems by controlling matter at the atomic and molecular scales, and to exploit novel properties and phenomena. Consider that most chemical and biological sensors, as well as many physical sensors, depend on interactions occurring at these levels and you’ll get an idea of the effect nanotechnology will have on the sensor world.

10.1 Introduction

A single-walled carbon nanotube (SW-CNT) is a nano scale tube formed by a cylindrical shell of single atomic layer of carbon atoms. Nanotubes have diameter of a few nm and length up to 100 nm so that they form extremely thin wires. The atomic structure of SWCNT can be formed by wrapping a stripe of single atomic layer of graphite sheet al.,ong a certain direction, and this direction determines the diameter and chirality of the nanotubes. Experimental and theoretical studies have found that these nano-meter sized CNTs have novel electronic properties, which can be metallic or semiconducting, depending on their radius or chiralities (Mintmire 1992, Hamada 1992, Saito et. al., 1992, Rao 1997, Wildoer 1998 and Odom et al., 1998).

9.1 Introduction

Nanoparticles (NPs) are particulate matter with at least one dimension less than 100 nm (Christian et al., 2008). Although NPs are naturally present in the environment, manufactured NPs may have distinctive surface properties and chemistry in comparison with natural NPs (Handy et al., 2008). Manufactured NPs have a large area-to-volume ratio and size-dependent properties, which impart novel properties and behaviors that make them suitable for nanotechnology applications (Auffan et al., 2009). Range of applications for NPs has brought about a rapid development of the nanotechnology industry.

8.1 Introduction

Nanotechnology is the manoeuvring or self-assembly of individual atoms, molecules, or molecular clusters into structures to craft materials with new properties. The definition of nanotechnology is based on the prefix “nano” which is from the Greek word meaning “dwarf”. In more technical terms, the word “nano” means 10^-9, or one billionth of something. The word nanotechnology is generally used when referring to materials with the size of 1 to 100 nanometres, which is true for metallic nano-material. In case of polymeric nano-material, size may reach 600 nm, as polymeric materials are larger in size compression to metallic material. Nano-materials have different properties from bulk materials as a result of their size. These differences include physical strength, chemical reactivity, electrical conductance, magnetism, and optical effects (Schmid, 2006).

7.1 Introduction

Organic polymers can play important role in ecosystems by accumulating biologically important elements and also by retaining soil moisture after aggregating soil particles. Extracellular polymeric substances (EPS) play an important role in cell aggregation, cell adhesion, and biofilm formation that subsequently protect cells from a hostile environment. Furthermore, certain polysaccharides from microbial sources are surface active, and thus attempts have been made to use them as metal chelaters, emulsifiers and flocculants in industrial and environmental fields/domain. Such use of microbial polysaccharides has infused renewed interest in its production and characteristics.

6.1 Introduction

Nanotechnology is the study of manipulating matter on an atomic or a molecular scale that deals with particle sizes between 1 and 100 nano meters at least in one dimension. Particles reduced to the nanoscale show some unusual properties which are different from what they exhibit on a macro scale, enabling unique systematic applications Tarafdar et al. (2012). The unexpected properties of nanoparticles are broadly due to the large surface area of the material, which dominates the contributions made by the very small quantities of the material. Nanoparticles, thus, take advantage of their dramatically increased surface area to volume ratio.

Nanotechnology has the potential to revolutionize the agricultural and food industry with new tools for the molecular treatment of diseases, rapid disease detection, nanofertilizer, enhancing the ability of plants to absorb nutrients etc. Nanotechnology opened doors to new ways of identifying and quantifying biomolecules through use of nanosensors and nanoprobes.

5.1 Introduction

Phosphorus fertilization is a problem in acid soils due to the high fixation characteristics of these soils. Soluble phosphorus carriers such as triple super phosphate tend to get reverted into insoluble and slowly soluble forms, for e.g. iron and aluminium phosphates.  Some soils in Mauritius have been shown to fix up to 90% of applied phosphorus. The fixation characteristics as related to soil properties have been studied for some soils of Mauritius. Rock phosphate offers a good alternative or complement to triple super phosphate.  In volcanic soils of Chile it is recommended to apply rock phosphate in combination with triple super phosphate because of the high phosphorus-retention capacity of these soils.  However, in Western Australia it has been shown that rock phosphate response is low. Possible explanations are slow dissolution of rock phosphate due to the moderately acid pH (5.5 -6.5), low pH-buffering capacity, low calcium absorption in soil, which increases concentration of calcium in soil solution, and poor water holding capacity of these soils.

4.1 Introduction

More and more industrial applications require self cleaned surfaces, water repellent, anti-dirt pickup and many other specific surface requirements. Introduction of nanotechnology has changed the coating scenario drastically. Hard, anti-scratch, hydrophobic coatings are achieved by the addition of small amounts of nano-pigments which help in creating hydrophobic surface. It is also possible to grow certain nano-fibers which on chemical treatment give surfaces which can either attract water or repel it. It is also possible now to create self healing coatings which can repair surface once they are damaged by scratch. Capacitance coupler pads have been devised to reach those corroding areas which are not covered by other corrosion protection methods. Stringent requirements of many modern industrial application resulted in developing coatings which can give special surface properties such as high hardness, scratch resistance, hydrophobicity, anti-dirt pickup etc.  This brief article presents a few new researches which provide one or more special properties to the surface.

3.1 Introduction

The concept of nanoscience was first described in 1959 by physicist Richard P. Feynman in a lecture to the American Physical Society and it was Japanese researcher Norio Taniguchi who coined the term nanotechnology in 1974 to describe precision engineering with tolerances of a micron or less. Eric Drexler in 1986 in his book Engines of Creation, brought nanotechnology into the public domain.

2.1 Introduction

The word Nanotechnology has originated from a Greek word which means “dwarf” and nanometer is one billionth of a meter (1 nm = 10^-9 meter). The nano-scale is not just another step toward miniaturization but a qualitatively new scale. The new behiviour of matter at nano-scale is dominated by quantum mechanics, material confinement, large interfacial volume fraction and other unique properties, phenomenon and processes. At nano-scale, physics, chemistry and biology converge towards the same principles and tools. Nanotechnology cannot be considered as a discipline in science or technology but it is domain in science and technology. Nanotechnology is a multidisciplinary area, any scientist, engineer, medical doctor can do research on nanotechnology. Presently, it is more of a science and less of a technology because of a lack of proper tools for studying the properties of nano-material. There is an immediate need to convert this science into technology and get out of this transition stage.

1.1 Introduction

With the rise in the global population, the demand for increased supply of food has motivated scientists and engineers to design new methods to boost agricultural production. With limited availability of land and water resources, growth in agriculture can be achieved only by increasing productivity through good agronomy and supported with an effective use of modern technology. Advanced agronomical methods lay stress not only on boosting agricultural produce through use of more effective fertilizers and pesticides, but also on the hygienic storage of agricultural produce. The detrimental effects of modern agricultural methods on the ecosystem have raised serious concerns amongst environmentalists. The widespread use of persistent pesticides globally over the last six decades has contaminated groundwater and soil, resulting in diseases and hardships in non-target species such as humans and animals. The first step in the removal of disease causing microbes from food products or harmful contaminants from soil and groundwater is the effective detection of these damaging elements. Nanotechnology can augment agricultural production and boost food processing industry through applications of these unique properties.

Use of animals in teaching is an inevitable process of learning in Veterinary and Animal Science colleges. Consequently, animals have to be handled for anatomical demonstration, surgical practice and used as experimental animals in various investigatory researches. The apprehensions and pain the animals have to suffer from these handlings (mishandlings) have brought the need to look for alternative ways to deal with animals and yet the purpose of learning about them does not diminish. Now-a-days, a growing emphasis is placed on minimizing the overall use of animals alongside advancements in science.

Animal’s response  to external stimuli is a behavior. Domestic animal behaviour and performance are correlated. Man’s intervention has led to huge modifications and modulations in animal behaviour patterns over ages but certain characters and normal behaviours of animals are needed to be expressed, otherwise may lead to abnormalities or performance loss. Animal freedoms also ensure certain basic freedoms to domesticated animals including freedom to express normal behaviour. With the developing concern over animal welfare among consumers, growers and animal activists, the need to ensure animal freedoms is call of the hour. Measuring animal welfare is a complex process which requires multidisciplinary approaches. There are four approaches to determine animal welfare viz, productivity, animal health and disease, physiology and behavior which are used individually or in combination.

Various indicators like range of behavioural, physiological, pathological and carcass-quality parameters can be used to assess the welfare of animals. Whenever, animals undergo painful handling or any other managerial operation, they are likely to face short-term stress. In this condition an increased physiological responses, behavioural responses, injury or mortality are most commonly used; however, some animals which are kept in improper housing with less floor space may cause chronic stress leading to increased disease incidence and suppression of normal development. Therefore, the following techniques can be used to assess the animal welfare at farm level in any given situation.

A disaster (from Latin meaning, “bad star’) is the impact of a natural or man-made event that negatively affects life, property, livelihood or industry often resulting in permanent changes to human societies, ecosystems and environment. The event itself is not a disaster; it is the impact that is a disaster. Their possibility of occurrence, time, place and severity of the strike can be reasonably and in some cases accurately predicted by technological and scientific advances. Hence, we can to some extent reduce the impact of damage though we cannot reduce the extent of damage itself.  The impacts suffered include trauma, starvation, dehydration, infection, disease, shock etc. Animals are often the silent victims of disasters, and there is a real need around for the provision of effective training and management programmes to ensure that their survival and welfare are adequately accounted for. This demands the study of disaster management in methodical and orderly approach.

In India, the cow is a worshipped as symbol of wealth, strength, abundance, altruistic giving and full of earthly life. Cows are traditionally treated as a sacred animal. Dairy products are extensively used in India and are one of the most essential nutritional components of meals.
 
The laws governing cattle slaughter is shown in entry 15 of the State List of the Seventh Schedule of the Constitution, meaning that State legislatures have exclusive powers to legislate the prevention of slaughter and preservation of cattle. Some States allow the slaughter of cattle with restrictions like a “fit-for-slaughter” certificate which may be issued depending on factors like age and gender of cattle, continued economic viability etc. Others completely ban cattle slaughter, while there is no restriction in a few states. Prohibition of cow slaughter is a Directive Principles of State Policy contained in Article 48 of the Constitution.

All farmed animals are transported at some stage in their lives, sometimes to places where food is more readily available, sometimes to a different owner or a different place of keeping and sometimes to slaughter. The handling, loading, transporting and unloading of animals can have very substantial effects on their welfare. Wherever   poor welfare associated with the transport of animals is prevented, there is an immediate financial advantage because mortality rates and carcass downgrading are reduced. The attitude towards animals has major consequences on animal welfare during transportation. Therefore, laws and codes of practice can also have significant effects on animal welfare during transport. In order to produce guidelines that can be used to prevent or minimise poor welfare in animals during transport, it is necessary to be aware of the biological functioning of the animals concerned and the attitudes and actions of the people involved in the handling and transport procedures.

The wildlife (protection) Act, 1972 (No. 53 of 1972) consists of 7 chapters, 6 schedules and 66 sections. This act has been amended in 1980. This act further amended as The Wildlife (Protection) Amendment Act- 2002, from 17thJanuary, 2003. This act deals with all those matters related to wildlife in captivity/free range for conservation.

Chapter I (Preliminary)

It discusses about the terminologies and definition
Captive animal means any animal, specified in Schedule 1, Schedule II, Schedule III or Schedule IV, which is captured or kept or bred in captivity.
Circus means an establishment, whether stationary or mobile where animals are kept or used wholly or mainly for the purpose of performing tricks or manoeuvrers.

India is known for its rich wildlife heritage. In fact, the country is considered one of the best among available mega-biodiversity areas in the world. The landscape and agro-climatic conditions of India make it a unique habitat for wild animals. The government of India has made attempts to conserve wildlife through different projects like Corbett tiger, Elephant projects etc. The wild life management in India is at present ‘preservation-oriented’. This is bound to remain so for a long time because of the significantly depleted status of our wild life population. Indian government in pursuit of conserving the heritage of wilderness has made committed efforts with several wildlife and Forest Acts to ensure protection by declaring the areas as protected under the spectrum of national park and wildlife sanctuaries. The eco-tourism and conservation awareness has created environmental consciousness among the people.

Good livestock welfare practices demands thorough understanding of the basic nature of the animal. The science of understanding the details of animal behaviour is known as Ethology.  Knowledge about the behaviour of the species being reared proved as an important tool for implementing animal welfare in practical husbandry practices. Now a day’s global community is also advocating for the better livestock welfare standards. Exploiting animal’s natural behaviour could certainly prevent unnecessary sufferings related to handling and restraining during routine farm activities. On the one hand this ensures physical and mental welfare of livestock, while on the other hand improvement in the production is guaranteed. Without involving heavy investment behavioural knowledge based management interventions can bring paradigm shift in welfare status of farm. Therefore, behavioural studies are of great importance in increasing our understanding and appreciation of animals.

1 Broilers

The broilers are also called young meat chickens; generally attend a body weight of 2 kg at 35-38 days of age with a feed conversion of 1.5-1.8. This improvement in growth is equivalent to reduction of market age by one day per year. This fast growth is possible due to intense feeding good quality feed & growth promoters in less space. However, this type of rearing has challenges many welfare issues in broiler farming.

Pig production is concentrated mainly in the North-eastern corner of the country and consists primarily of backyard and informal sector producers. Though pig population is only 2% of all the livestock animals, Pork production in India  represents 7% of the country’s total meat production. This value is highest compared to any other species of meat animals.

Sheep and goat rearing in India continues to be traditional even today. This sector is primarily in the hands of poor, landless or small and marginal farmers who raise their animals on natural vegetation, stubbles and supplement tree lopping. The productivity of sheep in India is relatively low with an average body weight gain of 20 to 50 g/day. The major causes for the low productivity are inadequate grazing resources, tropical heat and disease incidences and a lack of awareness about improved management practices.

Productivity measures, such as rate of growth or reproduction have traditionally been used as indicators of biological functioning. If this is regarded as closely related to animal welfare, then high productivity should be evidence for a high state of welfare. In some cases, selection for production has pushed animals to the point where basic biological functioning and body maintenance is compromised. Therefore, Production measures are always misused.  Productivity of the group is a different measure than productivity of the individual. Such group overall is performing poorly but that productivity from a few outstanding individuals makes average productivity look high. Similarly specific individuals who are performing very poorly may be overlooked if average group performance is high. Although commercial organized dairy farms are very limited, but welfare issues are always there in both small and large farm. Some of the important issues in the organized farms are discussed below.

Animal welfare organizations are those organizations which are volunteered to help people to protect their animals. It is concerned with the health, safety and psychological wellness of animals. They have a deep understanding of needs of animals and thus help animals in distress. The types of stake holders depend on what type of animals are reared.

Companion animals are all those species of animals which are kept by man for companionship and which are often referred to as pets. It is quite common to see community dogs or cats living in residential colonies. This is because due to very fast urbanization all the open spaces are getting used up for construction of residential complexes, and the animals like dogs and cats living on these open areas are getting displaced. The residents that occupy these residential buildings find these animals to be a nuisance and want them to evicted.

Pet and companion animal can be discussed under street dog/stray dogs and owner dogs.

Long used as beasts of burden, animals in India are still regarded today as little more than commodities rather than sentient beings who feel pain, stress, exhaustion and depression. Low literacy rates and the tendency to follow traditional practices and cultural traditions have left India surely lacking in the area of animal welfare. India holds the majority of the world’s working animal population. Animals that are forced to work in India include bullocks, horses, ponies, mules, donkeys, camels, elephants and dogs. Despite a proud heritage and a culture rooted in tolerance and compassion, animal welfare is largely ignored by Indian society, leading to extreme animal suffering. Our villages and to a great extent, the urban population still allow working animals to be mercilessly exploited in fields, on the streets, in brick kilns, on battlefields, on playgrounds and in timber areas – all in the name of agriculture, entertainment, security and any number of other “justified” pursuits.

Performing animal means any animal which is used at, or for the purpose of any entertainment to which the public are admitted through sale of tickets. Thousands of wild animals are used worldwide to perform demeaning and unnatural tricks to entertain the public (circuses, side-shows, within zoos, and in advertising, film and television). 
There are number of welfare issues related to performing animals which involves animal fighting, shows, (among domestic animals) or entertaining wild animals.

The process of civilization and materialist life style has forced man to make laws which govern or rule the conduct of the people of society or community. In the earlier days the relation of human and animal was interdependent and mutual. Now a days man has become self-centered and ignorant of his surroundings. This has led to cruelty on the animals in many circumstances. Therefore, in pursuit of prevention of the cruelty to animals following laws, regulations have made by the government.

A number of animals are used in this country for conducting a variety of experiments. There has been a long felt need to prescribe guidelines and procedures for animal experimentation covering all aspects. The Central Government has constituted a Committee for the Purpose of Control and Supervision of Experiments on Animals (CPCSEA) under PCA Act 1960 to ensure that experimental animals are not subjected to unnecessary pain or suffering before, during or after the performance of experiment on them. For this purpose the government has made “Breeding of and Experiment on Animals (Control and Supervision) Rules, 1998 as amended during 2001 and 2006 to regulate the experimentation on animal. Under these provisions, the concerned establishments are required to get themselves registered with CPCSEA, form IAEC, get their Animal House Facilities inspected, and also get specific projects for research cleared by CPCSEA before commencing the research on animals. Further, breeding and trade of animals for such experimentation are also regulated under these Rules.

Animal Welfare Board of India was started under the stewardship of Late Smt. Rukmini Devi Arundale, well known humanitarian. The Animal Welfare Board of India is a statutory advisory body on Animal Welfare Laws and promotes animal welfare in the country. The board established in 1962 under Section 4 to 10 of the Prevention of Cruelty to Animals Act, 1960 (No. 59 of 1960).  The primary sources of funding of the AWBI are grants from the Government of India. However, contributions, subscriptions, bequests and gifts will also be encouraged.

The purpose of PCA 1960 is to protect animals from being subjected to unnecessary pain or suffering. This at consists of 6 chapters covering 41 sections. This has been amended in 1982. The sections under each chapter have been concised for easy understanding. This provides only baseline information about the act.

Care and treatment of animals is possible by the combined efforts of all the stake holders of animals shared by the owners, consumers and veterinarians. Although, veterinary services are available throughout the country, involving different stakeholders including veterinarian, there is an entrenched lack of empathy and a profound disconnect among stakeholders when it comes to identifying with the pain and discomfort of animals. 
Veterinarians participate in two ways in animal welfare and animal ethics. One is the role of the veterinarian as an individual member of a profession. The other is the collective role of the profession, as expressed by the professional bodies.

1 Human and Animal Interactions in the Ecosystem
1.1 Evolution

It is proved that humans and animals share common ancestors as per evolution process. Thus, it is likely that, animal capacities are similar to humans, but these capacities differ only in degree. Furthermore, if the capacity for a particular feeling gives an adaptive advantage to an animal, then this provides supportive evidence for its existence. The presence of very similar neurological structures in other animals constitutes some sort of evidence that they can have the same sorts of mental states as humans. In the process of evolution depending on the favourable and unfavourable environmental factors, few organisms may die and few organisms might multiply. The relationship between biotic and abiotic components helps in the formation of ecosystem. In this ecosystem each and every organisms have equal chance to survive. The evolution process is well explained by Darwin’s theory.

1 History

Animals are culturally worshipped and revered as gods in India by different communities such as cow as Kamadhenu by Hindu religion. The scientific study of animal welfare has rapidly grown during last few years. Many religions follow principles of ahimsa such as Jains and Hindus do not harm cattle; Muslims do not harm pigs etc. Thus caring for welfare of animals is an inborn attitude of majority of Indians. As per the Indian tradition and culture, animals always had a respect and a special place in society. Hinduism, Buddhism and Jainism have always preached kindness and compassion to animals. Each Hindu God or Goddess is seen with an associated animal as vehicle or incarnation. For example, Lord Krishna was a shepherd and is seen with a cow, Lord Rama with the monkeys, Lord Vishnu with the eagle and Lord Shiva with a snake around his neck and the bull ‘Nandi’ at his feet, Goddess Saraswati is the goddess of wisdom and literacy is seen with swan.

Bhuva is a small village in north-west Gujarat – India.  My mother was born there. The loving people of Bhuva called me ‘Bhano’ (Sister’s Son / Nephew) and it was my favourite place to go as a child. I have my fondest memories of Bhuva, but could not visit for several decades, until when I was once at the Junagadh Campus of Gujarat Agricultural University, to inaugurate the International Conference on New Developments in Agriculture. Bhuva was not too far and I decided to go there. Soon as I reached, a familiar face, now aged with time, recognized me from a distance and with tears rolling from his old eyes (and mine) he hugged me, calling out “MaroBhano, MaroBhano” (My sister’s son, my sister’s son)! Now in his eighties, it was overwhelming to meet Nanji Ata, who I always remembered being wise, educated and cheerful. He was a relatively progressive farmer with about 6 to 7 acres of land, a few cows and a buffalo. Though water was scarce and saline, he managed to make a good living and was considered a well to do man.

It is well recognized that sustainable management and sustainable livelihoods are inseparable. If neglected and if the present trends are not corrected in time, everyone’s future is threated. On the other hand, there is increasing recognition of living examples and demonstrated evidences of how the eco agricultural practices can help provide a solution to some of the major problems of today and tomorrow. Also, the main stream international agencies are emphasizing that agro-ecological approaches are the way forward. What the policy makers, farmers and people would like to know is How !it has been our experience that in most countries of the developing world the answer to ‘How’ of eco-agricultural is being demanded!

Our Soils – Our Waters & COP22

In the last several decades many international forums and institutions have discussed and agreed that food and water security are the most important issues for the future. The damage to the ecology directly affects the food, land, water, health and the livelihood. Agricultural progress serves as the best way to fight poverty, hunger and livelihood problems.

Though in the last few decades, billions of pages about hunger, food and water security have been written, thousands of conferences have been organized, the urgency of action plans and creating holistic models is the most important need. For this, we must require bold reforms and action oriented programs which can reach the smallest farmers and give an optimistic signal rather than a despondent picture. Developmental models that are holistic and close to nature, sustainable and based on inclusiveness considering ‘unto the last’ women and man are the need of the day.

In contrast to the traditional universities, agricultural universities have been entrusted with the Herculean task of technology dissemination at the grass root level such that the package of practices evolved by the agricultural scientists should reach out the end-users, viz. farmers , for adopting in the field, with consequent increment in the farm productivity and farmer’s income.

This unique mandate has been assigned to agricultural universities on the pattern of land grant colleges of the United States. Such vision and trust, envisaged by Pandit Jawaharlal Nehru and his devout lieutenants, herald creation of state agricultural universities (SAUs) in the early 1960s. The key role played by SAUs in the first green revolution and agricultural human resources development have been regarded as the milestones in the history of India post-independence, that made the country self-sufficient in food production and, in turn, to self reliance in milk, vegetables, fruits and inland fish production.

"Where is your Dhoti, Dr. Mehta ?” Dr. Varghese Kurien surprised me as I entered his office at IRMA (Institute of Rural Management Anand). That was April 2000, soon after I had taken over as the Vice Chancellor of the erstwhile Gujarat Agricultural University (GAU) and had decided to call on him during my visit to the Anand Campus. (At that time GAU was the largest University in the Asia with four main campuses – Dantiwada, Anand, Junagadh and Navsari and about 65 experimental farms / stations spreaded all over).

The Late Dr. APJ Abdul Kalam is described as a great patriot, visionary leader and the 11th President of India ( 2002 – 2007 ). The country would have celebrated his 84th birth day on 15th October 2015. To many like me, he was the most ideal role model that the youth of India needed, in recent time. He emerged as a complete human-being who touched the lives of people.

My first meeting with him was when he visited IPCL in eighties - as the DRDO Chief to discuss about Carbon Fiber and Composites. I was heading GSFC’s R&D Centre and other facilities like engineering plastic Nylon – 6 and their Composites and hence was invited to join the discussions. That interaction left a strong impression in my mind. Later when I became Vice Chancellor of Gujarat Agricultural University, I had many more opportunities to meet him and was often surprised at his deep rooted interest and knowledge in every sphere of Science & Technology. Subsequently, to my delight, I received an invitation from his office on the eve of 26th January evening - at home with the President and later was given more time for a one-to-one meeting the next day. Walking across the corridors of the Rashtrapathi Bhavan, the atmosphere looked rather formal and uneasy for me, but, as I was ushered into his room, I saw Dr. Kalam wearing his favourite blue shirt and smiling. He moved forward and greeted me with the same friendliness and warmth. As we started talking about Agriculture scenario, the work I was planning and the future prospects, I marveled at his understanding and insight and left the room truly inspired. 

Rivers are the most important system for water, for irrigation and human settlement. Historically, civilizations always nucleated near rivers, and latter also had social and religious significance. Rivers in India are considered holy and play the most important part in the lives of people, fauna & flora and the future environmental system.

The Ganga Basin is the largest river basin in India which includes the Ganga, the Yamuna, the Ghagra, the Gandak, the Kaveri basin etc. Compared to these, the Vishwamitri River, situated between Mahi River in North and Narmada River in South in Central Gujarat is a small seasonal river but it is very important for the city of Vadodara and Central Gujarat region. This seasonal river originates from Pavagadh hills and flows east to west. It is a typical small river with the kind of problems in most rivers in India and other countries – liquid and solid wastes, enouncements, blocking of water ways, floods in monsoon months and dry dumping basin during most other months etc.

All agriculture universities have three main Directorates – Education, Research and Extension. Of the three, I have often observed that Extension Department comes in for maximum criticism. ‘Loose links’and ‘need to do much more in transfer of knowledge and technology’ are frequently emphasized at various levels – especially in meetings with farmers groups.

This is understandable – as it is said that less than 10% - often less than 6%, of lab scale knowledge and development reach the farmers fields in developing countries and even in many ‘developed’ counties. The situation is much more challenging when we consider a large population of small and marginal farmers – who as we saw can play extremely important role in eco-agriculture. A large percent of such farmers – women and men are practicing eco friendlyagriculture without realizing it. Their ‘ignorance’ can be converted in to advantage and new opportunity. The age old extension practice of reaching farmers through meetings, visit , seminars, camps, demonstrations all have limitations and need to be ‘scaled up’. New developments in information and communication Technology offer a great opportunity for a big jump in reaching the unreached. Again to alarge population of ‘Green Revolution’ – there is a new hope and opportunity.