eChapters

It is difficult to ascertain which came first, food or human being. It is the same situation as chicken and egg where we lack evidence to indicate which came first on earth.

It does not matter which came first but we know for sure that human being needs food and he or she needs everyday and throughout his or her life. In other words, a human being cannot survive without food indicating permanent unbreakable bondage between food and human being. It supports the basics of human civilization-food, agriculture and humanity.

9.1 Introduction

Flood water which is in the form of a hydrograph when passes down a river section undergoes several changes in its form. There may be some addition of water to the river section when the flood wave passes down the river section. There may be some diversion of water from the section. Thus, depending on the addition or abstraction of water to the incoming flood water, shape of the flood hydrograph in the downstream section may change. Sometimes channel storage and resistance to flow of water in the channel section also affects the shape of the flood hydrograph.

8.1 Introduction

The knowledge of statistics and probability is very helpful for correct prediction of hydrological data and correct prediction of hydrological data is useful in giving good performance in all water resources projects. Since hydrological data are highly stochastic varying both in space and time, it is essential to predict them as correct as possible. The hydrologic evens do not depend on physical and chemical laws but depend entirely on nature. They cannot be predicted exactly by using any relationship but can be predicted at different probability levels by fitting suitable probability distribution functions. Application of statistics and probability in the field of hydrology can help to predict the hydrologic events in a better way. In hydrology, objectives of statistics are as follows (Suresh, 2008):

7.1 Introduction

Flood is an unusually high stage in a river resulted due to high rainfall or snow melt which causes large flow of runoff in it. During flood, the river overflows the banks and inundates the adjoining areas. Flood causes heavy damages to buildings and hydraulic structures besides causing catastrophic loss to human life and property. It causes great economic loss due to disruption of many structures and damage to agricultural fields. Many forest and aquatic lives are affected by the flood. Hundreds of crores of rupees are spent every year to control, forecast and manage the flood.

6.1 Introduction

When rainfall strikes a ground surface, some losses like initial and infiltration will occur. After these losses are fulfilled, runoff will begin. The runoff will ultimately reach a stream. The main routes through which runoff flows are (i) overland flow, (ii) interflow and (iii) groundwater flow. Overland flow which is also called as surface flow flows over the land mass and reaches a stream. Overland flow soon reaches a stream and if it occurs in sufficient quantity, it forms an important element in the formation of flood peaks. In small and moderate storms, there may have predominant initial and infiltration losses resulting minimum amount of surface runoff and this is especially true in case of permeable soils. If the soil is impermeable, then there may have reasonable runoff. However, surface runoff is an important factor in streamflow only for heavy or high intensity rainfall.

5.1 Introduction

A steam can be defined as a flow channel in to which the surface runoff flowing over the land surfaces and base flow/ground flow flowing below the ground surfaces meet. It receives the total flow from a specified basin. Streamflow representing the runoff phase of the hydrologic cycle is the most important basic data for hydrologic studies. Interestingly, stream flow is the only part of the hydrologic cycle that can be measured accurately. Stream flow is a historical data and like rainfall and runoff, it is a stochastic hydrologic variable. It is also called as discharge or rate of flow. Discharge is defined as the volume of water flowing through a cross section in a unit time.

4.1 Introduction

Precipitation is a major component of hydrological cycle. It occurs because of condensation of water vapour molecules in the atmosphere. When the precipitation falls on the grounds, it undergoes several phases before it appears as runoff in the streams. Certain amount of precipitations is intercepted by the foliage of plants and roofs and other parts of the building and other hydraulic structures. This intercepted water is called as interception loss which is evaporated to the atmosphere. Sometimes the dried surface of the buildings and other structures soak certain amount of precipitation while falling on them which also adds to interception loss. After striking the land masses, certain amount of the precipitated water gets infiltrated into the soil surface which then moves both in lateral as well as in vertical direction. This loss is called as infiltration loss. For the study of groundwater, infiltration loss is not a loss but rather it is a gain in terms of groundwater recharge. However for a surface water hydrologist, it is a loss since it decreases the amount of runoff contributing to the stream or any other water bodies.

3.1 Runoff

Runoff is one of the important parameter of hydrologic cycle. It is defined as that portion of precipitation which is not absorbed by the deep soil strata but finds its way into the stream after meeting the demands of evapotranspiration, interception, infiltration, surface storage, and surface as well as channel detention. It includes surface runoff received into the channels after precipitation occurs, delayed runoff that enters the stream after passing through the land surface, and other delayed runoff from the temporarily detained pits, depressions, swamps or detained as snow fall. It is thus the flow collected from the drainage basin and appearing at the outlet of the basin. The runoff process is demonstrated in Fig. 3.1 as flow chart. Details of the runoff process are discussed as below.

2.1 Introduction

Precipitation is the general term for all forms of moisture emanating from clouds and then ultimately falling on the land surface. It is the total supply of water derived from the atmosphere in the forms of rain, snow, hail, mist, dew, sleet, fog etc. The liquid form of precipitation is called as rainfall whereas the frozen forms of precipitations are snow, hail and sleet. Of all the different forms of precipitation, rain and snow are the two dominant factors that contribute maximum amount of water. In Indian condition, rainfall is the most important form of precipitation that contributes the highest amount of water causing stream flow. Unless otherwise stated, the term rainfall will be used in this book synonymously with precipitation. It is the primary input vector of the hydrologic cycle. Generally it is expressed as the depth water on a horizontal surface over any specified time interval. If the specified time interval is day, then the amount of precipitation is called as daily precipitation. Similarly, the precipitation being contributed over time interval of a month, season and year is termed as monthly, seasonal or annual precipitation. Its form and quantity are influenced by the action of different climatic factors such as wind, temperature and atmospheric pressure. The study of precipitation forms a major portion of the subject of the hydrometeorology.

1.1 Water and its Importance

Water has played a crucial role in sustainace of lives of all living beings including animals, plants and human beings in this earth since time immemorial. It is there since the creation of the nature and will probably remain till the destruction of the nature. It is used in multifarious uses including domestic, industrial, agricultural, recreational and many other uses. It occurs in the nature in practically three forms i.e. solid, liquid and gaseous forms. All the three forms are important to living beings; but the liquid form of water is more beneficial. The weight of the water helps in running hydroelectric turbines, the density of water helps in floating the ships, the steam energy produced by heating the water helps to run the locomotives and thus is beneficial in many ways. It is considered as the most important resource of the society. It has become part and partial in our life so that we cannot live without water. That is why water is called as life.

Abstract

Meta analysis quantitatively summarizes the findings of a large collection of individual experiments. It is a powerful statistical tool since it integrates a vast literature and thus includes large sample size. It leads to a stronger conclusion than traditional literary review as studies are analyzed applying statistical methods. Meta- analysis is increasingly being applied in different fields of biological sciences. It has been emerged as an independent subfield of modern health science researches as in this field very few studies achieve statistical power in isolation. Meta- analysis has also become an integral part of plant science research, e.g., agricultural research, ethnobotanical research, tea and health science research etc. Meta-analysis has few limitations although rigorously conducted meta- analyses are considered more valuable than any single study contributing to the analysis.

Abstract

As we have entered in the post genomic era where we have successfully completed the full genome sequencing of many important crop species and now the future challenge is to ascertain the functions of all genes present in plant genome.

Abstract

Cancer is a potent disease causing nearly 6 million deaths per year worldwide. There are a number of cancers such as skin, brain, lung, breast, stomach, colon and blood cancer caused due to number of factors like unbalancing of hormones, smoking etc. Cancer could be treated by chemotherapies or through irradiation therapies.

Abstract

Nanotechnology is an emerging field that offers various potential applications in the areas of agriculture, health and medicine. Recent advances in the design and synthesis of nano-materials aids for developing sophisticated nano-devices for clinical research and practice. Applications of nano materials in medicine includes disease diagnosis, early prognosis, detection of pathogens, tumor detection, tissue engineering, target  specific drug delivery,  development of  biomaterials  for oral health  and understanding of cellular mechanisms in live cells using molecular imaging.

Abstract

Modern world is experiencing energy insecurity because of extreme population pressure and depleting energy resources. Fossil fuels though have highly applauded for contributing to today’s development, are non renewable energy and debated for not sustainable. This has posed serious challenges to the scientific fraternity for finding the suitable alternatives. A cheap, eco-friendly, sustainable or renewable type of energy is visualized for development with added advantage of mitigating green house gases.

Abstract

Since the beginning of the civilization, medicinal plants have been used to prevent and treat various ailments. At present, most of the pharmaceutical/ nutraceutical industries highly depend on wild medicinal plants for the supply of raw materials for extraction of bioactive compounds. As medicinal plants receive increased scientific and commercial attention, there is increasing pressure on the wild medicinal plant populations.

Abstract

Thermophiles mainly harbor in highly temperate environments such as hydrothermal vents, hot springs, fumaroles etc. The main importance of thermophiles is due to their thermostable proteins, enzymes and their adaptive mechanisms at higher temperature which are very useful for industrial applications. The main rationale behind this research was to isolate industrially important thermophilic bacteria from the Hot Springs of Sikkim which can be used as tools for genetic engineering and vector based research activities.

Abstract

Biosurfactants (BS) are amphiphilic compounds produced by microorganisms mainly bacteria and are known to contain hydrophobic and hydrophilic moieties that play a major role in reducing surface tension (ST) and interfacial tensions between individual molecules. Chemically, BS is a complex molecules consisting of lipopeptides, glycolipids, polysaccharide protein complex, fatty acids and phospholipids. They are known for their biodegradability, low toxicity, and renewable nature.

Abstract

Bacilli, a group of endospore forming bacteria present in soil, contribute directly or indirectly to crop productivity. Bacilli have many physiological unique traits like multilayered cell wall, stress resistant endospore formation, secretion of peptide antibiotics, peptide signal molecules, extracellular enzymes, which make them ubiquitous and assist to their survival under adverse environmental conditions for long time.

Abstract

Bamboo is nature’s unique gift to mankind. It has tremendous scope for use in eco-friendly agro-forestry programmes, to bring marginal lands into use. The requirement for bamboo is increasing for various traditional and industrial requirements. In India almost 99% of annual bamboo production comes from the natural forests and only about 1% is derived from plantations.

Abstract

Quercus species of family Fagaceae are very important from both economic and ecological perspectives. These exhibit irregular fruiting, and produce seeds recalcitrant to storage, thereby difficult to propagate through conventional procedures. Again because of their very difficult to root nature, extremely limited success has been observed in vegetative propagation. Application of new technological approaches like in vitro propagation may be of interest for accelerating tree improvement programs to these hardwood species. This review provides a summary of the advancement in the application of in vitro propagation to oak species of Kumaun West Himalaya India.

Abstract

Biotechnology offers an opportunity to exploit the cell, tissue, organ or entire organism by growing them in vitro and to genetically manipulate them to obtain desired compounds. It plays a pivotal role in search for alternatives to production of desirable biomedical compounds. There are several approaches have been used to increase the yield of metabolites from cell cultures such as manipulation of nutrient medium, application of exogenous growth stimulators, chemical treatment, precursor feeding, elicitation, transformed cultures, metabolic engineering, micropropagation, bioreactor cultures and etc.

Abstract

Dietary phytochemicals and herbal medicines are under intensive investigation for their potential as chemopreventive agents against various diseases due to the wide variety of microbial and plant functionally relevant secondary metabolites. The chemical diversity of phytochemicals, as well as phytochemicals and complex metabolic interactions between the biological systems may exceed the capacity of the platforms of traditional analysis, and therefore pose major challenges in the study of chemopreventive phytochemical compounds.

True/False

Q.1.    The precision of an estimator increases as the sample size increases.
Q.2.    Statistical power is the probability that a statistical test will indicate a significant difference is true i.e. it is the probability of taking correct decision.

True/False

Q.1.    In many clinical research studies, the regression analysis is used to develop models for prediction of an outcome from one or more explanatory variables.
Q.2.    Now a days, the linear, logistic and Cox (proportional hazards) regression models are used frequently in medical research.

True/False

Q.1.    Demographic data and vital statistics are important tools for researchers, epidemiologists, health planners and health professionals.
Q.2.    The distribution of people across different geographic regions is known as population density.

True/False

Q.1.    The accuracy of the measurement refers to how close the measured value is to the true value.
Q.2.    The precision refers to how close a set or group of measurements are together.
Q.3.    If the processes of measurement are repeated under identical condition, then precision explains that up to what extent these repeated values are reliable.

True/False

Q.1.    In many epidemiological studies with substantial follow up time, it is very often an interest to study the time taken for a particular event to occur.
Q.2.    The time taken for death or graft failure since transplant, time taken for relapse after treatment, time to death after treatment etc. are examples for survival time.

True /False

Q.1.    A diagnostic test enables the doctors to reach at a decision whether the patient is suffering from a particular disease or not.
Q.2.    The recent developments in the field by biotechnology have led to the development of many new medical tests.
Q.3.    The general principles in designing and conduct diagnostic test studies are not known well.

True/False

Q.1.    In clinical practice and in public health, the objective is to find better ways to ‘prevent,  diagnose and treat disease’.
Q.2.    Among all research designs, experimental study designs are the most reliable and  ideal designs to evaluate the ‘effectiveness or value’ of interventions (like drugs,  medication etc.) for human disease and disabilities.

True/False

Q.1.    The purpose of most medical research is to identify the causes of disease and search out the ways to prevent or cure them.
Q.2.    Now a day, epidemiology has become a basic science for public health
Q.3.    The studies of diagnostics therapeutic and prognostic procedures have successfully incorporated into growing stream of “Clinical Epidemiology”.

True/False

Q.1.    Two independent random variables (X,Y) are always uncorrelated but reverse may not be true

True/False

Q.1.    The most fundamental assumption for “Parametric inference” is that the random sample drawn is from “Normal” population.
Q.2.    The most fundamental assumption of “Non-parametric” test is that the random sample drawn is from “Continuous distribution”
Q.3.    The standard parametric methods are applicable for “Estimating the parameter” as well as for “Testing the hypothesis” about the parameters.
Q.4.    Non-parametric methods, are applicable only for testing the hypothesis about  distribution but not applicable for estimation purpose of parameter.

True/False

Q.1.    Qualitative or categorical data are frequently collected in medical investigation.
Q.2.    Qualitative variables may be, e.g. sex, blood type, treatment, groups, classification of exposure or disease and patients survived or not.
Q.3.    Qualitative variables include the grouped quantitative variables such as age groups of mothers, pre term babies, birth weight groups, 
hypertensive or normotensive etc.

True/False

Q.1.    According to Prof. RA Fisher “ANOVA” is the separation of variance assignable to one group of causes from the variance assignable to other group of causes.
Q.2.    The basic purpose of ANOVA technique is to test the equality (homogeneity) of several population means from the same 
experiment.

True/False

Q.1.    A hypothesis that sets the fundamental objective of scientific study is called the “Research hypothesis”.
Q.2.     A statistical assumption or statement about the unknown parameters of a population is known as Statistical hypothesis.

True/False

Q.1.    The process of knowing all the relevant information from the known sample to the unknown “Population parameter” is known as “Statistical inference.”
Q.2.    The method of estimating the unknown parameter of the population on the basis of known sample values is known “Estimation method.”
Q.3.    The “Point estimation and Interval estimation” are the two methods of estimating the unknown parameters of the population.

True/False

Q.1.    Collectivity (totality) of all sampling units is known as the “Population” and population size is denoted by “N”.
Q.2.    A list of all sampling units with their identification is known as “Sampling frame”. For example a list of all newly-born children in maternity home during a period of three months with specification of their sex, weight, name of their parents, their permanent address, etc. is known as sampling frame.
Q.3.    A function of all sampling units in the population is known as population parameter or population constant.

True/False

Q.1.    The set of all possible outcomes of a variable along with the frequency (the number of occurrence) of each outcome or a group of outcome is called “Frequency Distribution”.
Q.2.    The frequency of an occurrence of each outcome of a trail divided by total frequency is known as “Relative frequency” of the outcome.
Q.3.    The distribution of total probability “1” into probabilities of occurrence of each outcome of a trial, is known as probability distribution of the outcome.

True/False

Q.1.    A set containing all possible outcome of a trial in a study is known as “Sample space”.
Q.2.    If we are interested in observing the blood type of a child born in a hospital then sample space may be a set S is of the form S = {A, B, AB, O}.
Q.3.    If outcomes are continuous in nature, the sample space is specified as an interval that contains all possible outcome values.
Q.4.    When the occurrence of one event excludes the occurrence of other events, the events are said to be “Mutually exclusive events”.
Q.5.    In case of testing the type of blood of a newly born baby in a hospital, the blood types A, B, AB, O or gender (male, female) are exclusive events.

True/False
 
Q.1.    The set of observations or measurements collected on specific characteristics from each item (individual) constitutes data.
Q.2.    Each characteristic that is measured or observed, varies from item to item and is called “Variable”.
Q.3.    “Blood type”, “stage of disease” and “weight” observed on a group of cancer patients, are three distinct variables.
Q.4.    A variable that can be expressed in numbers such as age, height, blood pressure, is said to be “Quantitative variable”.

True/False

Q.1.    Statistics in singular is used to denote a subject (branch) of science.
Q.2.    Statistics in plural is used to denote “data or methods”
Q.3.    Statistics is defined as a science of collection, compilation, analysis and interpretation of numerical data.
Q.4.    Statistics can be used for two major purposes: descriptive and infe-rential.

Pollution is continuously increasing in India. To control ambient air pollution CPCB has prescribed National Ambient Air Quality Standards

Air

Estimation of Total Suspended Particulate Matter (TSPM) and Respirable Suspended Particulate Matter (RSPM)

Requirements
Instrument

High Volume Sampler (HVS) APM 415-411 (Envirotech Instrument India), Respirable Dust Sampler (RDS) APM 451 (Envirotech Instrument India) with midget impinger containing absorbing solution were used.

Plants play an important role in maintaining ecological balance by actively participating in the cycling of nutrients and gases like carbon dioxide, oxygen and air pollutants. Sensitivity and responses of plants to air pollutants is variable. Some plants are sensitive and act as bio indicators of air pollution (Kozhouharov et. al. 1985, Guderian, 1998). Others which are tolerant may act as sink to air pollutants. However this aspect needs more investigation for their use as indicators of air pollutants and in abatement of air pollution.

Urban Air Pollution and Its Impact on Roadside Plants
Urban Air Pollution

Modern industrial society produces a large number of gases and particles in quantities to harm human, plant or animal life. The amount of pollutants released to the atmosphere by fixed or mobile anthropogenic sources is generally associated with the levels of economic activity. Deterioration of air quality is a major environmental problem in many urban centers in both developed and developing countries. Automobiles constitute a major source of air pollution in the urban areas. Motor vehicle emissions result from fuel combustion or evaporation. The most common types of transport fuel are gasoline and diesel. CO₂ and water vapors are the main products of the combustion, emitted in vehicle exhaust. The major pollutants emitted from the vehicles are particulate matter (suspended fine and ultra fine), sulphur dioxide, oxides of nitrogen, carbon monoxide and metals.

Through the sharing of experience of developed countries, which faced the massive health problem due to vehicular pollution in the past and remedial measures adopted by them, it is needed to avoid mistakes made in the past and instead introduce effective measures for the future to reduce or confine the damage that has already been incurred. A progressive policy of motor vehicle emission control strategy, which may be more feasible/affordable, has to be adopted for solving immediate air pollution problems. Uncontrolled growth of vehicular fleet and its emission is taking place in the urban areas, which must be controlled/regulated in order to prevent future disaster. Because of economic development and speed of motorization expected over next decades this problem will become more vulnerable and even greater, If control measure are not adopted timely. It is suggested that planning must begin to provide alternatives to the motor vehicles and to reduce emission of the vehicles. The country without high capital resources will face challenging problems for evolving control strategy that will be acceptable both economically and socially.

Metals

Metals are ubiquitous in the modern industrialized environment. Heavy metals like cadmium, iron, molybdenum, lead, nickel, tin and zinc are present in the environment in trace concentrations. These metals are universally present in soil, water, air and biota (Freedman, 1995). Global anthropogenic heavy metal inputs to ecosystem through air, water and soil have increased substantially world wide over last century (Nriagu, 1996).

Atmosphere serves as the medium through which pollutants are transported and dispersed. While being transported, the pollutants undergo chemical reactions, which may be lethal or scavenged by chemical or physical process/method. But it all exclusively depends upon the meteorological conditions (Lee et .al, 1994). Historic air pollution episodes reveal that atmospheric conditions influence the pollutant concentrations as well as their toxicity (Goldsmith & Friberg, 1976; Wichmann et.al, 1989 and Pope et.al, 1992). However, the location, duration of release, height as well as the pollutant concentrations are also important, which effect the secondary pollutant transformation under the influence of meteorological conditions, but the atmospheric behavior is independent of their sources (Holzworth, 1974).

The response of plants to air pollution can be understood by analyzing the physiological and biochemical parameters of plants.

Physiological Parameters

The epidermal cells are the first to interact with the air pollutants and also lack chloroplast. Epidermal cells hence cannot remove excess sulphur through the production and release of H2S. Damage to plants by air pollutants depends upon the amount of pollutants entering the cells and their reactivity with cellular constituents. Plants regulate the entry of gaseous molecules through stomatal movement thereby affecting the photosynthesis and transpiration. Response of plants to gaseous pollutants varies from species to species. This is due to differences in the stomatal conductance, aperture size and permeability of plasma membrane (Yunus et al., 1996).