eChapters

3.1 Introduction

A Massive increase in population, urbanization and industrialization have led to an increase in the quantity and composition of waste. The waste is increasing day by day and is estimated to reach up to 2.2 billion tonnes by 2025, according to the reports by World Bank. It becomes a necessity for every nation to fore look upon the waste management system for their respective countries. From the collection, segregation, transportation, disposal all have become an important criterion to deal with. Among the available disposal options; the easiest and environment friendly is “Recycling”. 

The basic philosophy of nutrient management should be to apply fertilizers at rates to ensure high fertilizer use efficiency so that the amount of unutilized fertilizers is reduced to environmentally acceptable levels. Leaching of nitrate into public drinking water supplies has become a national problem. There is no realistic alternative but to use increasing quantities of inorganic fertilizers for maintaining food supplies in order to feed the increasing population. Used properly, fertilizers can, in fact, lead to better environment because greater vegetative growth and higher crop yields leave large quantities of residues in the soil, thus reducing erosion; absorb more carbon dioxide, a major source of green house effect and lessen the need to bring marginal and forest land into cultivation. The declining or stagnating yield trend in India has been attributed to multiple nutrient deficiencies and imbalance of nutrients. Therefore, the most widely recognized alternative is integrated nutrient management (Trehan et al., 2008).

Soil test based fertilizers is the maintenance of soil fertility and plant nutrient supply to an optimum level for sustaining the desired productivity through optimization of the benefits from fertilizers, organic manures, green manures, bio-fertilizers, non-conventional sources and crop residues. Soil test based fertilizers  aims at maximization of the use efficiency and minimization of the avoidable losses of nutrients from all the sources such that triple objective of maximization of crop yields, sustenance of soil, water and air quality and improvement of socio-economic conditions of farming community is accomplished.

Breadfruit (Artocarpus altilis) belongs to family Moraceae. The Latin name is derived from Greek words (artos = bread, karpos = fruit), and altilis meaning ‘fat’. Baked or roasted in a fire, the fruit has a starchy texture and fragrance, reminiscent of fresh baked food.

Breadfruit is an important staple crop and component of traditional agro-forestry systems in the Pacific for more than 3,000 years. This species originated in the South Pacific and spread throughout Oceania by intrepid islanders settling the numerous islands of Melanesia, Micronesia and Polynesia. Due to efforts of Captain Bligh and French voyagers, a few seedless varieties from Polynesia were introduced to the Caribbean in the late 1700s. These gradually spread to other tropical regions. Breadfruit is now grown in close to 90 countries.

The association of weeds with field crops was started when ancient man started cultivating plants as crops commercially. However, type of weed flora went on shifting with the passage of time, due to changing climatic conditions, cropping pattern, agronomic practices, crop cultivars etc. When crops are cultivated invariably a variety of volunteer undesirable vegetation come up simultaneously which competes with the crop for all growth factors viz., nutrients, soil moisture light, space etc.

Definition of Weed

Weed is a plant that originates under a natural environment and in response to imposed and natural environments, evolved and continues to do so as an interfering associate with our desired plant and activities.

Weed is a plant growing out of place. They are unwanted not useful, persistent and prolific, effectively competing with the beneficial and desirable crop plants for space, nutrients, sunlight, and water, interfere with agricultural operations and thereby reducing the yield and quality of produce.

Weeds are unwanted and undeserved plants that interfere with the utilization of the land and water resources and thus adversely affect crop production and human welfare. Thus a plant out of its place or a plant growing where it is not desired is a weed. This definition was given by Buchholtz in 1967. E.g. Bajra is a weed in pulse, pulse is a weed in bajra, tomato is a weed in brinjal field. Weed is defined as the unwanted, undesirable plant growing out of their proper place which interfere with the utilization of natural resources, prolific, persistent, competitive, harmful and even poisonous in nature and can grow in adverse climatic conditions (Jethro Tull: Father of Weed Science).

Weediness: Weediness is defined as the state or condition of a field, flower beds, lawns and so forth in which there is an abundance of weeds.

Weeds are plants that are unwanted in a given situation and may be harmful, dangerous or economically detrimental. Weeds are a serious threat to primary production and biodiversity. They reduce farm and forest productivity, displace native species and contribute significantly to land and water degradation. The costs of weeds to the natural environment are also high, with weed invasion being ranked second only to habitat loss in causing biodiversity decline.

Q. 1 Which type of gully is formed on flat land?
(A) U-shaped  (B) V-shaped
(C) L-shaped   (D) T-shaped

The fungi are present everywhere. They are in the soil and soil crust, in atmospheric air, in sea and pond water, rivers and water streams, and on the surfaces of almost all the material ,whether living or otherwise, on affected food stuff , vegetables and food grains, on body of human beings, animals, birds and fishes, on plant surfaces, on leathers and clothes in damp weather, on house walls and ceiling in damp conditions, on railway coaches and buses roofs having water leakage and dampness, in caves, on garbage and decomposing material etc. The fungal spores are present everywhere, however the fungal growth occurs where the congenial conditions for their growth is available.

5.1 Jute Seed Production 

Jute ranks next to cotton as the most important natural fibre and it recognized as the ‘golden fibre’. Its products being biodegradable and environment friendly in contrast to synthetic substitutes, a renewed interest in this natural fibre has been generated in the recent past throughout the world. Important characteristics of jute fibre are its silky lustures, high tensile strength, low extensibility, considerable heat resistance. Because of its great abundance and shortage of cotton, jute is blended with cotton and jute/cotton blended yarns are produced mainly to take advantage of the lower price of jute fibre (Doraiswamy et al., 1998). Several diversified product is also made from jute. Since currently the paper industry has been using it as a raw material for paper. It is also being used in geotextile. The jute sticks are largely used as fuel and also for making gun powder.

Summary

Genetic engineering can be used to introduce specific traits into plants. It may not replace conventional breeding but can add to the efficiency of crop improvement. It is possible due to the fact that plants are totipotent, enabling regeneration of a new plant from an isolated cell. Transformation of dicots is usually carried out using the bacterium, Agrobacterium tumefaciens. Genes are cloned into plant expression vectors that carry the 25-bp repeat sequences at the borders of the onc region, known as the left and right borders (LB and RB) and the virulence genes (vir) of the Ti plasmid.

Small amplitude wave theory was based on the premise that motions are sufficiently small to allow the free surface boundary condition to be linearized. Finite amplitude wave theories or Stokes’ higher order theories are similar as per the concept in which additional higher order terms that were neglected in the Airy’s theory are included. In general, the higher the order of the wave theory, higher will be the limiting wave height for which it would be valid.

Amino acids are essential components of all living cells as building blocks of proteins. They are also metabolically active and supply substrates for many other biochemical reactions. In a bacterial cell, about 0.4% of the dry weight is amino acids. The amino units in other living systems varies according to species, age and part of the body.

Horticulture word derived from Latin word: Hortus meaning ‘Garden’ and cultura means ‘cultivation’.

Father of horticulture: Thomas Andrew Knight, John Lindley, Liberty Hyde Bailey.

1^st artificial hybridization in fruit crop in world: T. A. Knight.

Father of vegetables: L. H. Bailey.

1^st book in horticulture: Fruit growing in India: W.B. Hayes (1945) & related to litchi.

Export growth of fresh fruits and vegetables in term of value is 14% and of processed fruits and vegetables is 16.27%.

Contribution of horticulture sector to agriculture GDP (2013-14): 29%.

India is largest producer of Coconut, Cashew, Tea and Spices.

A. Multiple Choice Questions

1. While studying the history of domestication of various cultivated plants were recognized earlier:
   1. Centers of origin
   2. Centers of domestication
   3. Centres of hybrid
   4. Centres of variation
2. The quickest method of plant breeding is:
   1. Mutation breeding
   2. Hybridization
   3. Selection
   4. Introduction

Poultry sector in India has grown from a backyard activity into a major commercial activity in four and half decades. Poultry is one of the fastest growing subsectors of agricultural sector in India. Within the poultry sector, broiler production is growing faster than egg production and about 66.7% of the total output (in value term) comes from the poultry meat sector and only 33.3% from egg production (FAO, 2008). India ranks fifth in chicken and sixth in duck population. Presently, India is world’s third largest egg producer and the fifth major producer of chicken meat (FAO, 2010). Poultry is today the major source of meat in India. As per an estimate about 2 million people are employed, fully or partly, along the poultry value chain and that an increase in annual per caput availability of one egg or 50 gm or poultry meat generates about 20,000 to 25,000 full time jobs (Ciamarra & Otte, 2009). Distribution of chicken and duck population as well as poultry meat and egg production among different regions, countries of the world and among different Indian states has been already discussed in chapter one of this book.

The importance of vegetables in human nutrition is now well known all over the world. Vegetables are rich and comparatively cheaper source of minerals and vitamins. Their consumption in sufficient quantities provides taste and palatability, increases appetite and provides fair amount of fibre. Besides, they provide many specific chemical substances, which are essential for growth, reproduction and for the maintenance of good health and also beneficial in protecting against some degenerative diseases (Prior and Cao, 2000; David, 2005; Elison and Levin, 2006).

Apart from their nutritive value, vegetables probably do more than any other groups of food to add colour, texture and flavour to our daily diet. Majority of the population in India is vegetarian, and thus, vegetables form an essential item of food for both the rich and the poor people. National Nutrition Monitoring Bureau (1997) surveys indicated that the daily intake of most foodstuffs in Indian households, except for cereals and millets, is much below the recommended dietary allowances (RDA). The diets provided negligible amount of protective foods. It was found that consumption of green leafy vegetables (< 10 g) and other vegetables (70-80 g) per day, which are rich source of micronutrients, are woefully inadequate. However, as per the RDA, an adult man should consume 200 g roots and tubers, 100 g green leafy vegetables and 100 g other vegetables (Table 1) in a day. In addition, fresh fruits (100 g) as available in different seasons should be consumed regularly for the prevention of chronic diseases (NIN, 1998).

Post Harvest Technology

Introduction

The demand for edible oil has grown with the increase in world population. Improvement in living standards have made the population increase the consumption of oils and fats. It also has become more discriminating with respect to the oil quality. Oil producers, have to meet the increasing demand for edible oil, and improve product quality and variety as these have become major factors in the market-place.

Agriculture has been tuned through selective seed breeding and improved crop production practices to take care of the increasing demand. The emphasis has been to improve yield per hectare or tolerance to climatic variations. The ability to modify seed through traditional breeding and biotechnological approaches promises a revolution in agriculture. Using various approaches, not only quantitative improvement but also the qualitative changes especially fatty acid changes have been brought about. Customer support is needed for the genetically modified crops. A lot of controversy exists at present in accepting genetically modified crops. This aspect has to be studied in depth and needs to be resolved at the appropriate level as quickly as possible.

A prerequisite for the production of top quality oils and meals is a high quality raw material. Some attempts have been made to improve the physical characteristics of oils and meals through genetic, agronomic as well as through post production handling and processing technologies. The harvested quality grain should not be damaged during transportation, storage and processing. To produce a crude oil, the industry uses a number of processing steps, the application of which depends on the type of seed and the scale of the operation.

The purpose of Post Harvest Technology of oilseeds is to recover the maximum quantity of good quality oil and also make the deoiled cake useful as food or feed. Oil in oilseeds is located in spherosomes, which are the oil bodies (Salunkhe et al, 1992). When seeds are broken into small particles and the cells get ruptured the oil becomes available and is easily extracted. From the time of harvest, till the seeds are fed to the oil extracting machines, various processes are carried out to make good quality of oil available to the consumer apart from providing remunerative prices to the producer, namely, the farmer. The various steps involved in the oil extraction are proper harvest, drying, storage, seed cleaning, heat treatment and different types of machinery. The basic objective of every step in the post harvest technology is to minimize losses and to sustain or improve the quality of the product.

Ring Porous

• having vessels more numerous and usually larger in cross section in the springwood with a resulting more or less distinct line between the springwood and the last season’s wood— compare diffuse-porous.

• In some species (e.g. Oak (Red Oak, White Oak) Teak and ash elm, hickory), the largest pores are in the earlywood while those in the latewood are more evenly distributed and uniform in size.

• These woods typically have distinct figures and patterns, and the uneven uptake of stain (the large pores soak up more colour) make the figure more pronounced.

• These are also known as open-grain woods

Semi-ring porous or Semi-diffuse porous

• In some species (e.g. Butternut, Black Cherry, Black Walnut, Pecan, Tanoak), pores are large in the earlywood and smaller toward the latewood, but without the distinct zoning seen in ring-porous woods.

• Also, some species that are usually ring-porous (e.g. Cottonwood) occasionally tend toward semi-ring porous.

• General considerations

 • Agglutination

 • Slide agglutination test

 • Tube agglutination test

 • Capillary tube agglutination test

 • Plate agglutination test

 • Hemagglutination test

 • Hemagglutination-inhibition test

 • Coagglutination test

Freezing is one of the most critical stages in ice cream manufacture because it creates the frozen structure while simultaneously incorporating air. This chapter explains the principles of dynamic freezing and the structural changes that occur as the mix is transformed into semi-frozen ice cream. It discusses ice-crystal formation, air incorporation, overrun, draw temperature, fat destabilization, and product condition at freezer draw. Different freezer systems and hardening requirements are examined, along with calculations related to output and overrun. The chapter also introduces ingredient feeders and ripple or ribbon systems. Understanding freezing technology is essential for controlling texture, body, meltdown, yield, and overall product quality.

Introduction

Seed certification is a legally approved system for quality control of seed multiplication and production. Seed certification procedures are designed to ensure physical and genetic purity, freedom from other crop seeds, objectionable and other weed seeds and designated diseases with good germinability of the foundation and certified seed. Seed certification is done by the State Seed Certification Agency of the concerned state (SSCA) notified under section 8 of the Seeds Act, 1966 or by National Seed Corporation (NSC), where State Seed Certification Agency does not exist. The General Seed Certification Standards are applicable to all crops, which are eligible for certification, while field and seed standards are applicable to individual crop, constituted as the minimum seed certification standards. The word ‘seed’ or ‘seeds’ as used in these standards also includes all the propagating materials. Seeds or propagating material, which does not meet the standards of seed certification prescribed in the Indian Minimum Seeds Certification Standards, 2013 (Gunasekaran and Trivedi, 2013), are not certified by the Seed Certification Agency. The general seed and field standards for various crops are given at the end of this chapter.