eChapters

Introduction

With the introduction of chemical pesticides in India during 1947 when 250 tonnes of DDT was imported for Malaria eradication programme, there is a steady increase in consumption and at present about 25 per cent of the cropped area is covered by pesticides. Their use has helped in increasing the productivity over the years. The consumption pattern of different groups of insecticides has indicated the same trend. The Indian pesticide industry with 85,000 MT of production in is ranked second in Asia (behind China) and twelfth globally. The Indian pesticides industry is dominated by insecticides where herbicides and fungicides are the key segments globally. Among the pesticides, insecticides account for 57 per cent, fungicide 28.7 per cent and herbicides 14.0 per cent during the year ending 1997-98. Owing to the ban of highly persistent organochlorine pesticides, there is decrease in the trend. Among the different crops, cotton consumes 44.5 per cent of the pesticide worth of Rs.2462.13 millions, even though it occupies only 5 per cent of the cropped area. Cotton is followed by rice (22.00% of pesticides) and other crops.

Introduction

Huge population in the developing countries requires increased amounts of food and fiber from a shrinking agricultural land base. Intensification of agriculture through expansion of irrigation facilities, introduction of high yielding varieties and application of increased amounts of agrochemicals has been in progress. Besides, the cultural practices like spacing, crop rotations, sowing times and tillage methods have been modified to achieve maximum productively per unit time from the available land. However, along with various technological achievements, sever outbreaks of insect pests, diseases and weeds in agricultural crops have also occurred. Many hitherto unknown species have assumed serious status and some of the serious pests have developed resistance to one or more groups of pesticides. In addition, pesticides have contaminated different components of our environment and pose a potential health hazard to consumers. Therefore, the future pest problems will have to be tackled in an environmentally benign manner as a part of a sustainable crop production technology (Dhaliwal and Heinrichs, 1998; Koul et al., 2004; Koul, 2008).

Introduction

Food security is an agricultural issue that has political connotations in the world and more strikingly so in the developing world, where systems of governance has assumed and lost power on this issue. Agriculture not only contributes to the overall growth of the economy but also provides a vital livelihood base, employment and food security to the majority of the country’s population. Recent food price hikes have drawn the attention of the world’s policy-makers and news media to food security which triggered a wide variety of policy responses throughout the world. It threatens the food crisis and livelihood of millions of peoples suffering from hunger and poverty.

Introduction

Taxonomy, which includes identification and classification has transformed into systematics and biosystematics in the recent times and is integrating itself into the biodiversity, which is now a global phenomenon occupying the main thrust of human life. The magnitude and cause of this biodiversity is the central problem of taxonomy and one of the key problems of science as a whole, not to speak of pest management. The science of taxonomy started in the late eighteenth century by a Swedish biologist, Carl Linnaeus who with a small number of similar minded scientists pioneered a standard system of using two Latin names for an organism, denoting “genus” and “species” that is still in use. This led to referring of biological organisms by an universally agreed name and identity, and further providing means for their realistic classifications. When these identifications and classifications got strengthened further with accumulated biological knowledge, it allowed the development of modern biology on a sustainable and stable base. In addition, in the recent times taxonomy has become more demanding subject for areas in science and technology, which are dependant on access to accumulated experience and knowledge for their survival and development. Insect pest management is one such area where taxonomy provides the essential scientific basis, without having any claims of its own and integrating itself in such a manner that its role is difficult to delineate precisely.

Introduction

Information technology is set to become important in agriculture in the coming years. In the last few decades, the application of computers and communication technologies has led to the development of a plethora of information of all types in the area of plant protection science. These information bases are available on CD-ROM, on-line form in various hosts and via mail over internet, multimedia data bases, Decision-Support Systems (DSS)/Expert Systems (ES), Simulation Models (SM), etc.- to cite a few of the latest developments. Further, cyber space is fast emerging as an area of information technology, particularly in the field of crop pest management (Srivastava and Swain, 1998). The application of information technology in pest management has been one of the most exciting developments in the field over the last decade. From the 1960s, the entomologists began using computers for spray scheduling, population modeling, exploring control strategies and managing pest monitoring data. More recently, computers are being utilized in pest management delivery systems and decision support systems (DSS) designed to enhance decision making.

The steadily-increasing human population has led to a rise in the demand for food. As more land comes under agricultural cultivation there will be more pressure on natural ecosystems. Climate change will affect agricultural yield directly because of aberrations in temperature and rainfall, and indirectly through changes in soil quality, pests and diseases. In particular, the yield of cereals is expected to decline in India, Africa, and the Middle East. As the temperature rises conditions will become more favourable for pests such as grasshoppers to complete a number of reproduction cycles and thereby increasing their population. In the higher latitudes (in the northern countries) agriculture will benefit with the rise in temperature as the winter season will be shorter and the growing seasons longer. This will also mean that pests that will move towards the higher latitudes as the temperatures rise. Extreme weather conditions such as high temperature, heavy rainfall, floods, droughts, etc. will also affect crop production.

Agriculture has always played and will continue to play a dominant role in the growth of Indian economy in the foreseeable future. It represents the largest sector producing around 28 per cent of the gross domestic product (GDP). Achieving self sufficiency in food grains production has ensured a high priority for agricultural sector in the successive development plans of the country. Agricultural production is grossly affected by attack of pests/diseases on various crops and the losses in food grains only are to the tune of Rs 90,000 crores each year in India. The prevention of such losses needs substantial consideration and accordingly forewarning of pests and diseases is essential for taking timely control measures. These are also required for assessing losses. Pest/disease infestation in crops is highly influenced by meteorological factors. The weather based modeling for early warning of pest/disease infestation may provide appropriate tool for investigating and predicting pest/disease status.

Introduction

Integrated Pest Management (IPM) has evolved over the last five decades since Stern et al. (1959) first gave the concept of integrated control. The basic tactics of IPM were developed and applied to reduce crop losses against the ravages of pests before the term IPM was coined (Jones, 1973; Smith et al.,1973). Entomologist at the university of California, United State of America (USA) played a pivotal role in developing IPM tactics (Perkins, 1982). Development of resistance to insecticides and the elimination of natural enemies by insecticides led to the development of ‘supervised control’. The publication of the book ‘Silent Spring’ written by Rachel Carson (1962) was a defining milestone for it brought the problems caused by pesticides to the attention of the public and the scientists. The term ‘integrated pest management’ was used for the first time by Smith and van dan Bosch (1967). In the last five decade many synthetic pesticides have been banned. In 1972, ’integrated pest management’ and its synonym were incorporated into English dictionary and accepted by the scientific community (Kogan, 1998). IPM is the main strategy accepted for pest management under agenda 21 of the United Nations conference on Environment and Development (UNCED, 1992).

Introduction

Plant pests have been a part of the man’s environment, since ages. Traditional agriculture which included diverse crops and indigenous crop management practices provided little opportunity for the pests to build up and spread rapidly (Smith and Allen,1954). Crop production is constantly threatened by increasing difficulties in controlling insect pests, which are a major impediment to improved livelihoods of the poor farmers. However, in the quest for increasing food production for the growing population, use of pesticides became a norm in crop management. Pesticides became an integral part of the process owing to losses from weeds, diseases and pests reducing the harvestable produce. Use of pesticides along with high yielding varieties, irrigation and improved seed did result in increased productivity. But the rampant use of these chemicals, under the adage, “if little is good, a lot more will be better” has played havoc with human and other life forms.

13.1. Introduction

Diseases of dairy cattle cause huge economic losses. The losses are associated with lower productive and reproductive performances as well as mortality of the valuable animals. The high producing animals are susceptible to various infectious and contagious diseases. The diseases may permanently affect the performance of the animal e.g., mastitis may permanently damage the quarter(s) of the udder. Thus the culling rate of the herd may increase which affects the profitability of the farm. The occurrence of diseases in cattle is preventable. So, steps are needed to prevent the occurrence of diseases as prevention is better than cure. A number of factors are associated with the occurrence of diseases in animals. Disease prevention and control involves measures designed to prevent or reduce as much as possible the incidence, prevalence and consequences of the disease. These measures can be applied to control the reservoir of infection, break route of transmission or reduce the numbers of susceptible. Various new and environment friendly methods have been developed by modification or refinement of the old methods of disease control and prevention.

12.1. Introduction

Milking is the crucial operation in a dairy farm, as milk is the main source of revenue of a dairy farm. Milking is a labour intensive operation. About 50-60 percent of the total time of farm operation is required for milking and allied activities. Milking is an art which requires skill, patience, efficiency and experience. It should be handled quietly, quickly, gently, cleanly and completely, by avoiding any type of pain, annoyance or inconvenience to the animals. Possession of high yielding animals or good managemental conditions will not generate profit if the milking operation is inefficient.

1.1. Introduction

A typical dairy farm consist of different classes of dairy animals like calf, heifer, breeding heifer, pregnant, milch and dry animals and bull. The systems of management for the different classes are not same. They need some routine as well as periodical farm practices, some of which are common for all categories of animals (i.e., identification, dehorning, grooming etc.), while some categories need special farm operations (e.g., castration in males, milking etc.). Also there is need of routine disinfection of animal sheds and farm premises to prevent and control occurrence of diseases and maintaining the animals healthy. Further for proper execution of all these operations there is need of keeping farm records.  Keeping in view the above points, this section deals with some important farm management practices.

10.1. Introduction

During last few decades dairy animal production has been intensified several folds, along with this reproductive problems have also increased. For efficient dairy animal production, the cow should show regular reproductive activities like cyclic breeding activity, pregnancy at appropriate time, give birth of a live healthy calf and again pregnant after sometimes. If any of these activities are inadequate, then it substantially affects the profitability of the farm. There is an ample scope of improvement of these reproductive setbacks through traditional breeding, feeding and management. However, reproductive problems can be minimized by the use of recently developed reproductive techniques. It not only minimizes reproductive problems, but also improves the reproductive efficiency of the dairy herd and better exploitation of the genetic potential of high merit animals.

9.1. Introduction

Reproduction is an important event in the life of an animal (both male and female). The success of a dairy farm depends on the reproductive efficiency of cattle which depends on the efficient reproductive management. The animals should be reproductively sound. The cow should be a regular breeder with calving interval of 12-13 months to minimize the generation interval and to increase the profitability of the dairy farm. The bull should have high libido, produce good quality semen with high fertility rate.

8.1. Introduction

Providing appropriate nutrition is an elementary step in dairy animal production. Improper nutrition prevents cattle to express full genetic potential for milk production and reproductive efficiency. Nutrition helps in maintaining good health condition of the animal.

Therefore, one should know the basic digestive physiology, various types of nutrients and their requirements in different categories of animals present in a dairy herd. As feed cost contributes principal expenditure of a dairy farm, balanced ration should be prepared in a cost effective manner. Proper understanding of feeds and rations also help to explore alternative feeds and supplements without hampering the health as well as productivity of the animals. Effective dairy farming requires converting feed into milk which worth more than the total cost of production (mostly contributed by feed cost).

7.1. Introduction

The lactating cows are important assets of a dairy farm. The profitability and viability of the dairy farm mainly depend on the overall milk production. The lactation cycle of the cow can be divided into different phases for efficient management as milk production, DM intake and body weight vary considerably during the different phases. In the early lactation, lactating animals loose body weight drastically and they are prone to various metabolic disorders. Efficient nutritional management during lactation is required to support the high milk production, persistency of lactation and health of the cows. Another most important event is the post partum oestrus and subsequent conception, which depends on the care and management of the cows during this period. Therefore, proper care and management of the lactating cows are essential to harvest maximum amount of milk from healthy cows in a sustainable way.

6.1. Introduction

Care of cows at and after calving is vital for successful birth and maintaining the cow and calf in proper health condition. Calving is a high risk event in terms of both cow and calf health, and is associated with most of the health problems. New born calves are born sterile and it gets infection from the surroundings which depends on the maintenance of hygienic environment and care of the just after birth. The fresh cows are susceptible to a number of metabolic diseases and infections due decrease immune status of the cow. Preparation and care during this period will minimize sickness and death of the cow and calf.

5.1. Introduction

A dry cow is a cow that is not producing milk. Usually cow remains in-milk for about 305 days (average lactation length), after that it remains for a period of about 60 days in dry condition (not giving milk) called dry period. Dry period is critical for a cow for regeneration of her udder and reserve nutrients for the next lactation, otherwise, milk production will not be upto the mark and the cow may suffer from several metabolic diseases after parturition. A dry cow is just as valuable as a lactating cow, therefore should be not neglected. A dry cow management programme includes nutrition, general management and health control programme.

4.1. Introduction

Heifers are young female cattle from 12 months of age to first calving. Heifer management is important as they are future cow of the herd. Proper growth and body condition of the heifers are associated with their early sexual maturity and age at first breeding, and their later productive and reproductive performances, when they become cow. Thus, proper care and management of the heifers is necessary to establish a good dairy herd.

3.1. Introduction 

Calves are the future replacement stock of dairy farm. The raising of calves, an important operation of the dairy farm requires a great deal of managemental skill, application and constant attention. Any negligency results in increased calf mortality, poor growth and development of the calves. So, care of the calves is important for success of the dairy farm.

2.1. Introduction

A system of housing is more or less synonymous to the system of management of dairy cattle. Housing is essential to protect the animals from extreme climatic conditions, wild animals and theft. Housing also helps to maintain normal health of the animal by proper feeding, watering and reducing environmental stresses. An efficient housing system ultimately leads to an efficient management and reduce labour requirements to the minimum.

1.1. Introduction

Dairy animal production in the last few decades witnessed tremendous growth throughout the world. The remarkable success of the dairy animal production can be attributed to the constant efforts of researcher, planner as well as producer. At present dairy farming is becoming a commercial activity. Hi-tech dairy farms produce high quality milk for making value added milk products for competitive markets around the world. The management of the dairy farming enterprises is crucial for the sustainability and profitability of it. The effective management of dairy animals essentially emphasizes the following areas:

2.1 Introduction

Rain and snow are the two chief sources of water of the earth. In-situ conservation of rainwater helps the plants to meet some of their consumptive uses directly. Not all the amount of rainwater that falls at a point is conserved by the soil reservoir to support the plant growth. Some part of it flows over the soil surface as surface runoff and some seeps down as infiltration and finally adds to the under ground reservoir. Therefore, rain or snow, which is not used directly by the plants, becomes a potential source of either surface or ground water for irrigation. In areas with extreme low temperature, snow contributes major source of water supply wherever, in humid and sub humid regions, rain is the principal source. Precipitation, rain or snow, is the first stage of the continual cycle of water in its round from atmosphere to the earth and return by evaporation from water bodies, snow surfaces and land surfaces. The continual cycle of distribution of water is governed by the process called as hydrologic cycle. Thus, precipitation or atmospheric water is the first form of water above the earth’s surface, the second form being the surface water on earth and the third form is the subsurface water or underground water. The study of occurrence, distribution and circulation of precipitation through the unending hydrologic cycle forms the basic part of study of hydrology. As mentioned above, the part of precipitation that is not used by the plants in-situ flows over the soil surface as runoff and contributes to either surface or ground water supply.

Abstract

India’s climate policy and its stand in the United Nations Framework Convention on Climate Change (UNFCCC) have developed through a complex and contradictory interactions between global pressures to take actions in the field of climate change, India’s foreign policy orientation, its environmental practices and various other national factors. India has been under growing pressure from the major developed economies and also from many small developing countries to play a leading role in mitigating climate change in keeping with its economic and political importance. National factors, including the very important consideration of maintaining rapid GDP growth, favours a conservative approach, with emphasis on expanding India’s share of global climate space. India ranks high on global climate change vulnerability because of its 7,500 Kilometre-long coastline, high dependence of its agriculture on monsoon, decreasing availability of freshwater and over-exploitation of ground water resources, presence of large population in cyclone-prone areas, low lying river deltas and fragile ecosystems like partially submerged lands, and not least, because of melting of the Himalayan glaciers, which feed close to 70 percent of India’s river waters. In 2008, India formulated a National Action Plan on Climate Change (NAPCC) under international obligations. India’s climate policy has always been the preserve of a small group of individuals protected from societal influence and unaccountable to the public at large. Indian policy makers claim to speak on behalf of those very people who have been consciously excluded from democratic and participatory decision-making. The industrialised economies reluctant to own up to their climate obligation only breeds more cynicism within the Indian society. Whatever the outcome of international conventions on climate change or any kind of global negotiations in the immediate future, India cannot afford to give up on the serious issue of climate change.

Keywords: Climate change, Economics, Policy, Agriculture

Introduction

Urbanization, a vital global phenomenon, refers to the process of city establishment and growth; the term commonly connotes population increase in the city from internal growth and immigration as well as their spatial expansion (Revi, 2007). Recent developments, uncontrolled population growth have been linked with the process of urbanization. Urban areas cover 3% of the global land but it gives shelter to nearly 26% of the global population (U.S. De, 2009). Increase in population growth and industrialization is posing threat to natural resources such as land air and water. Anthropogenic factors have led to change in land use pattern, high energy consumption, high level of generation of waste etc. As per UN survey, by 2050, approximately 70 percent of the global population will be living in cities (UN, World Urbanization Prospects, 2014). Unplanned growth is damaging the existing ecosystems along with that causing climate change and loss of biodiversity.

Introduction

In the recent years, climate change emerged as the single most pressing problem globally, and accordingly received an increased attention (Berrang-Ford et al., 2011). It is evident that human activities are responsible for the climate change. Natural processes may also lead to climate variability and change. The climate change forecasts resulted from simulation models indicate that the future climate is likely to turn into more capricious nature with more occurrences of extreme events (IPCC, 2013b). Future projections according to the World Bank (2010) reveal the need of raising food production by 1.8% per annum between 2005 and 2050 due to climate change rather than 1% per annum if there were no impact of climate change. The effect of climate change can be seen on the quantity and quality of various components in the global hydrologic cycle (Milly et al., 2005; Bates et al., 2008).

In South Asia, vulnerabilities to the climate change are the largest in semi-arid and arid countries, where rainfall is concentrated over a few monsoon months, year to year variations are high, and where water resources are decreasing (Lenton, 2004). Cruz et al. (2007) indicated that climate trends and variability can be characterized by increased air temperatures, which are more pronounced during the winters compared to the summers. Across the entire Asia, both spatial and temporal variability in rainfall trends observed during the past few decades may be attributed to climate change. It is likely to happen that climate change will extend the dry season when negligible or very low flows occur, which particularly affects the water management process due to inability to rely on water storage reservoirs or groundwater resources situated at great depths (Giertz et al., 2006).

Abstract

Women are amoungst one of the most vulnerable groups, being impacted by climate change. Socio- cultural barriers and traditionally ascribed roles make them the key person responsible for arranging primary resources such as fuel, water, food which face a serious threat from environmental stresses such as climate change. Women with the potential in terms of experience and a strong body of indigenous knowledge to combat the increased disaster risks enable their families to cope with climate change. To deal with these stressful situations women both at the local and global level adopt various coping strategies. The coping strategies adopted by them generally involves considerable amount of risk taking as they interfered not only with the household work but also with their income generating activities, education of girls and other opportunities for skill development. This chapter gives a comprehensive view of the gendered impact of climate change, as well as the coping strategies of women. The chapter also highlights the need of developing coping mechanisms into adaptive mechanism and strategies to provide a sustainable solution to deal with the issue of climate change.

Keywords: Coping strategies, Climate change, Gendered impact, Women

Abstract

Climatic variability with respect to total annual precipitation, mean maximum and mean minimum temperature as well as phytosociological characteristics of various herbaceous plant species of two distinct landscapes, ie, BudhaPushkar (BP) as sandy and Nasirabad Valley (NV) as rocky gravel, of Central Aravalli region was compared over a long period of time (1957-2012). Analysis of climatic data indicates reduction of total precipitation of 50 years by 1226.2 mm. There has been a ‘shift’ in monsoon season. However, a significant increase (36.8%) in precipitation was noticed during the winter season of last five decades. Data on total mean maximum temperature also showed significant variation. A rise of 2.5⁰C was recorded while compared the periods 1971-1990 and 1991-2011. Study showed a notable increase in the mean maximum and mean minimum temperature in the region. An assessment of changes in plant diversity at two landscapes was carried out over a period of 35 years (1976 and 2012). The phytosociological characteristics were compared for these selected years. It was observed that climatic variability have changed the order of dominants and other species with respect to frequency, density and IVI of herbaceous species at both BP and NV landscapes. Total number of species increase for BP landscape while decreased for NV stands, while numbers of invasive species are increased for both the landscapes over a period of 35 years.

Keywords: Climatic variability, Plant diversity, Central Aravalli region, Landscapes, Phytosociological characteristics

Abstract

While multiple species interact with each other in variable environments, they employ a variety of interaction strategies to withstand variation in environmental conditions. Phenotypic plasticity is one such mean allowing species to cope with environmental challenges often posed by the variation in consumer pressure, disturbances, and predation risks. In response to these and other environmental cues, expressed phenotypes can alter the sign and strength of interactions among species as these responses are often reflected in increased or decreased species competitive or facilitative abilities. Besides phenotypic plasticity, species interactions also depend on continued variation in abundances or densities of interacting species commonly termed as density-dependent interactions. Such density-dependence follows the law of diminishing returns, which means that while an individual species adds a density-dependent weight to the performance of other species, with increasing accounts, at a certain level of interaction it provides diminishing returns resulting in decreased population growth of the species. Thus, species interactions in variable environments hold two interdependent opposing forces: the growth-escalating and the growth-diminishing forces. The first one is resulted from adaptive phenotypic responses to variable environments and the second one is resulted from dynamic changes of abundances or densities of interacting species. Based on this conceptual framework, we describe community dynamics that are shaped by the balance of these two forces in variable environment. By analyzing these dynamics, we then seek underlying mechanism of Grim’s classic humped-back model of productivity-diversity relationship and also provide an alternative explanation for the intermediate disturbance hypothesis.

Keywords: Competition, Facilitation, Functional niche, Interaction continuum, Phenotypic plasticity.

Abstract

Climate variability/change is one of the very significant concerns discussed in the recent two decades. Its impact on air temperature and precipitation has received massive attention worldwide as they affect both the spatial and temporal patterns of water availability. Hence, it is becoming clearer that analysis of trends in air temperature and rainfall is significant in studying the impacts of climate variability/change for water resources planning and management. Therefore, the aim of the study was to detect theannual, seasonal and monthly trends in air temperature and rainfall in the Râmgangâ river basin. Daily air temperature (Bareilly and Moradabad) and rainfall data (Shahajahanpur, Bareilly, Bareilly BPO and Moradabad)of 40 years (1971 to 2010) were used for the study. Non-parametric Mann-Kendall test and theTheil-Sen’s Slope Estimator was used for determination of estimating the trend and magnitude of the trend. Findings revealed that the basin is experiencing a warming trend because of the rise in themaximum and minimum air temperature. In case of rainfall, Moradabad showna significant high positive trend during the monsoon season. This would alter the river run-off in long run if the existing trend continues to persist like this.

Keywords: Climate change/Variability, Mann-Kendall test, Theil-Sen’s Slope estimator, Water resource planning

Abstract

Climate change is the biggest problem of today, resulting in thawing glaciers, changes in crop yield, and disturbances of water resources not only in India but in the entire world. Crop yield were predicted according mid century (2050s) by using IPCC Scenario A2 and studied impact of climate change. Out of 80 districts of Uttar Pradesh the three were selected for the case study areas namely Meerut, Kanpur and Hamirpur. FAO based model ET₀ Calculator 3.1 and Aquacrop 3.1 Plus were used to estimate reference evapotranspiration and crop yields respectively by using two major food crops rice and wheat. Crop yield were estimated the present climatic conditions (2005) and mid-century condition (2050s). According to the comparison of simulation results for present and future scenarios, crop yield of rice and wheat was predicted to increase in the mid- century (2050s). However, food security was predicted to become a threat in future, because the increase in population till the 2050s is projected, and yield was increases in the major food crops. In order to sustain the growing population, there would be required in the future, a large area for growing rice and wheat in comparison to the area presently, to meet the same food availability per capita. Hence, there would be a need to increase the production of the food crops in order to meet the growing demands of food in the study areas.

Keywords: Crop yield, Global warming, Future, Production

Abstract

Cultivation of cash crops of good quality potent to give good economic returns depends largely upon adoption of modern practices in agriculture. The region under test consideration is completely irrigated and cultivates mostly the crops of grapes and sugarcane. A field testing that was carried out for the pumps used by local farmers, revealed glaring inefficiency in pump operation. This is attributed to numerous reasons, the standout of them-being improper pump selection and deviation from operating point. Survey of the farming pattern helped to establish nexus between the energy usages per acre for the two crops. Carbon Footprint was determined for the electricity utilized in these farms. Adoption of selection methodologies and efficient practices would lead to considerable saving in electrical power consumption. The impact of adoption of efficient practices was therefore quantified.

Keywords: Agriculture, Carbon Footprint, Pumps

Introduction

Biomass is a major source of energy in developing countries, particularly in India. Biomass as a fuel used in residential sector of India is a major component of total energy use in India. Type of fuels used in residential sector in India varies with locations and availability of the local fuels and also by way of cooking food in the open fires or in the rural cook stoves (Earthen Chulhas). The majority of the household in the rural sector of the developing countries burns the biomass fuel under traditional open stoves or in advanced closed cook stove (Fullerton et al., 2008). Biomass fuel includes any material of plant or animal origin, which is deliberately burnt by the human being. Approximately, 2 billion people in the developing world use the biomass fuel as the major source of domestic energy (Balakrishnan et al., 2002). Out of residential fuels, 80-90% of the energy requirement in rural India are met with the use of biomass in the form of fuel wood, dung cakes, charcoal and agricultural residue (TEDDY, 2007). Burning of biomass from all these sources is well known to be associated with the emission of smoke/plumes consisting of particulate and gaseous species as these are not energy efficient processes and thus the fuels are not burnt completely. The species emitted and their concentrations depend on the nature of the source of biomass and other factors including the physical parameters associated with the consumption of the biomass. The fate of the initial fire emissions depends strongly on both their composition and the regional state of the atmosphere. Once airborne, the particles begin to grow slightly in size as they age through condensation and coagulation. Despite their high concentrations and widespread distribution in the atmosphere, the sources remain poorly characterized. Biomass burning has drawn global concerns in the past decades for its effects on visibility, human health and global climate by emitting particulate matter (PM) and other gaseous pollutants (Andreae et al., 2005). Biomass burning emits significant global source of PM emissions to the troposphere which leads to deleterious impact on the earth’s atmosphere. It has an impact on the chemical composition of the atmosphere, the formation of photo oxidants and thus on air quality on a regional scale and climate change (Andreae et al., 2005). They also have harmful impact on human health, natural environment and ecological system (Cheng et al., 2000). The various impacts of these emissions have been well studied by Cheng et al. (2000) and Bardouki et al. (2003). Interest in this topic grew when several studies suggested that biomass burning emissions could rival fossil fuel emissions (Crutzen and Andreae, 1990). Biomass burning has received considerable interest (Bowman et al., 2009).

Abstract

Continental erosion and fluvial transport play an important role enhancing mobilization of organic carbon from soils and transferring this pool to the ocean through downstream rivers and streams. The Ganges-Brahmaputra river system represents one of the largest transporters of terrestrial carbon to ocean. Intensive agriculture in the Ganges basin coupled with atmospheric deposition (AD) of nitrogen may render the soil more prone to erosion loss of carbon and nutrients. The aims of this study were to quantify atmospheric deposition of nitrogen (AD-N) in the watershed and to assess the influence of land use and AD-N on carbon and nitrogen transport in Ganga River. We collected samples in summer low flow along a 1595 km long transect of the river to assess the status of DOC under variable land use and AD-N input and, at monthly intervals along a 35 km long transect to understand seasonal patterns and the influence of local control. Our study shows average deposition of reactive-N (NO₃^- + NH₄⁺) range from 19.7 kg ha^-1yr-1 in upper stretch to 38.6 kg ha-1yr-1 in the middle stretch. The AD-N in lower stretch was almost similar to the values recorded in the middle stretch of the watershed. The average concentrations of dissolved organic carbon (DOC) and dissolved inorganic nitrogen (DIN) in the river range from 0.62 to 5.3 mg L-1 and 52.0 to 385.6 µg L-1 respectively. The land-derived carbon and nitrogen emerging in surface runoff showed positive correlation with AD-N and the river DOC showed synchrony with land use, AD-N and autochthonous carbon pool. Our data indicate that DOC in Ganga River is rising and the land use together with AD-N is an important driver of rising DOC. We suggest that future climate model should consider large scale regional time series data on changing state of atmosphere-land-water coupling and associated shifts in carbon and nutrient transport of major rivers. This has relevance predicting region specific climate change drivers and preparing action plan for integrated river basin management (IRBM).

Summary

Water security can be defined as reliable availability of water in sufficient quantity and quality to sustain human health, livelihoods, food (agriculture, fisheries and aquaculture) and the environment (biodiversity and ecosystems). Discharge of chemical and biological pollutants (from agriculture, industry and domestic uses) into rivers and development of engineering infrastructure such as dams and weirs over rivers have modified river ecosystems threatening the global water security, water quality and water dependent biodiversity. Climate change (increase in the intensity and frequency of floods, droughts, bushfire and sea-level rise, ocean acidification, etc.) is an additional stress on water security. There is a need to reduce climate change impacts on water security which can be done via adaptations to climate change. Adaptation is adjustment in natural or human systems in response to actual or expected climatic stimuli or their effects, which moderates harm or exploits beneficial opportunities. In other words, the adaptation can be considered as, tackling the effects of climate change. Adaptation to climate change in terms of sustainable use of water may include increasing water availability by developing hydro-basins and transferring water from areas in which it is abundant to areas in which there is scarcity, the reduction of water losses, increasing storage capacity by building reservoirs and dams, rainwater harvesting, improvement of water use efficiency, desalination of seawater, water savings (leakage management, metering, retrofitting existing homes with water efficient products in toilets, showers, baths, using energy efficient dishwashers and washing machines), mandatory rainwater tanks in new and old buildings (for toilet flushing, washing clothes, gardens, car washing), use of recycled or reclaimed water for landscape irrigation or to recharge groundwater aquifers, and to meet commercial and industrial water needs.

Summary

Biodiversity (the variety of living things) is fundamental to ecosystem structures and functions, and provide the broad spectrum of goods and services that humans derive from natural systems such as food (e.g. fish), protection from disasters such as cyclones, storms, floods (e.g. mangroves) or maintenance of water quality. Species (biodiversity) respond to climate change either staying or moving out or dying out. For example, the rise of temperature as a consequence of climate change may cause some species to (a) stay in the same environment since they can tolerate to adapt to changes; or (b) may cause some species to move out in a suitable environment (e.g. some species to move pole ward, some up in elevation) or (c) some species (fish) to go deep to increased depths in the oceans to escape heat or warming or (d) may cause some species to die out or get extinct (species with restricted distribution, longer generation time will not be able to migrate or adapt to climate change). A pattern of range shifts such as pole wards and upwards has been documented in hundreds of species of plants and animals and is one of the strongest signals of biotic changes from global warming. These shifts result from two processes: cold-edge expansion and warm-edge contraction. There is now abundant evidence for local extinctions from contractions at the warm edges of species’ ranges or warm edge contraction because the species may have already reached the limits of their climatic tolerance. Investigations conducted reveals that many terrestrial and aquatic species are shifting their geographic ranges in response to rapid changes in temperature and precipitation regimes. For example, many terrestrial organisms are currently shifting in latitude or elevation in response to changing climate. It has been estimated that plants and animals have recently shifted to higher elevations at a median rate of 11.0 m per decade, and to higher latitudes at a median rate of 16.9 km per decade.

Summary

Climate change (floods, droughts, rise of temperature and sea level) can directly impact the incidence of water related diseases through effects on water temperature and precipitation frequency and intensity. This chapter focuses on some common water quality related diseases that may enhance due to climate change such as arsenicosis, cholera, cyanobacterial toxins, dengue, diarrhoea and malaria. Arsenicosis is the disease caused by arsenic (As) contamination. As poisoning via groundwater has become a worldwide problem with 21 countries experiencing As groundwater contamination including Bangladesh, India, and China. In Bangladesh, out of 64 districts, As levels in 60 districts have exceeded WHO recommended guidelines of 10 µg/L and in 51 districts it exceeded Bangladesh recommended guidelines of above 50 µg/L. Chronic exposure to As has been linked to carcinogenic effects in both humans and animals. These include cancer of the various skins and internal organs (lung, bladder, liver and kidney) and reproductive and developmental effects; cardiovascular disease; reduced intellectual function in children and mortality. Alternate floods and droughts (due to climate change) have been found associated with the release of As and contamination of groundwater in Bangladesh, therefore may increase the risks of the disease due to rise of extreme events such as floods and droughts. Cholera is a diarrhoeal disease caused by the bacterium Vibrio cholerae. In 2012, WHO reported 245, 3931 cases of cholera in 48 countries, with more than 3,034 deaths with a case-fatality rate (CFR) of 1.2%. The highest cases were from Africa, followed by Latin America and Asia. The epidemic of cholera is reported to be linked strongly with climate change. Changes in temperature, salinity, rainfall and abundance of phytoplankton have been shown to cause an impact on distribution and survival of V. cholerae. In Bangladesh, cholera (cholera-toxin producing strain of V. cholerae) outbreaks are related to plankton blooms and rise of sea temperature.

Summary

Climate change can affect the quantitative and qualitative status of water resources by altering hydrological cycles, systems and through changes of water quality via chemical and biological contamination. Changes in these variables lead to impacts on all the socio-economic and environmental goods and services that depend on these variables directly or indirectly including water supply, damage to ecosystems, water dependent food production. The most dominant climate drivers for water quantity or water availability are precipitation, run-off and river flows, floods, droughts, snows, glaciers, sea level rise etc. The observed climate change related impacts on world’s water resources/water quantity include increased precipitation at high latitudes and temperate areas and decreasing trends at low latitudes. The annual run-off in some regions may experience increased run-off, such as in high latitudes and large parts of the USA, whereas there has been a decrease in run-off such as parts of West Africa, southern Europe and southernmost of South America. Floods have been the most reported natural disaster events in Africa, Asia and Europe than all other natural disasters and in case of Bangladesh, six extreme floods have occurred in the last two decades. More intense droughts have been reported from Australia, semi-arid and semi-humid regions, western USA and southern Canada, the Sahel. Precipitation is projected to increase at mid- and high latitudes, in the tropics, whereas precipitation is projected to decrease over many sub-tropical areas (North Africa, northern Sahara), tropical Central American (Caribbean) and the Mediterranean. In areas where evaporation rates are expected to increase it would lead to reduced river and stream run-off. In contrast, areas receiving higher precipitation would likely have higher lake and river levels and may experience floods. The annual stream flow in the Murray-Darling basin (Australia) is projected to fall by 10-25% by 2050 and 16-48% by 2100 which would have severe consequences on irrigated agriculture in the region. Rivers depending on the Himalayan glaciers such as the Indus, Ganges, Brahmaputra, Syr Darya and Amu Darya could face water shortages or river run-off due to retreat of glaciers, and this would cause dramatic impact on drinking water supplies, biodiversity, hydropower, industry, agriculture and ecosystems on which about 2.4 billion people in Asia depends. Globally, ground water is the source of one third of all freshwater withdrawals, supplying an estimated 36%, 42% and 27% of the water used for domestic, agricultural and industrial purposes, respectively. The demand for groundwater is likely to increase due to global increase of water use for irrigation and a decline in surface water quality and reduced summer flows in snow-dominated basins. It is projected that climate change (drought, floods) will affect groundwater recharge rates (e.g. floods would increase recharge, drought would decrease recharge).

Summary

The main greenhouse gases (GHGs) that have caused the global climate change or global warming are carbon dioxide (CO₂), methane (CH₄) and nitrous oxide (N₂O). CO₂ is the principal anthropogenic GHG that affects the earth’s radiative balance. It is the reference gas against which other GHGs are measured and therefore has a Global Warming Potential (GWP) of 1. CH₄ and N₂O have a GWP of 21 and 310, respectively. CO₂ is responsible for most of the enhanced greenhouse effect of more than 50%, CH₄ for about 10-15% and N₂O for about 8%. The global atmospheric concentrations of CO₂, CH₄ and N₂O have increased since 1750. While CO₂ increased from a pre-industrial value of 280 ppm to 379 ppm in 2005, CH₄ increased from 715 ppb to 1774 ppb and N₂O increased from 270 ppb to 319 ppb during the same period. Rich countries and large developing countries account for most of global CO₂ emissions (China 23.5%, USA 18.27%, India 5.83%, Russia 5.72%, Japan 4.04% and European Union 13.98%). A new climate agreement called ‘Warsaw International mechanisms (November 2013) on loss and damage’ agreed to help the poor countries to cope with loss and damage from heatwaves, droughts, floods, typhoons, desertification and rising sea levels. The Warsaw agreement also includes a set of decisions to help developing countries to reduce GHG emissions from deforestation and degradation of forests which is backed by pledges of US$280 million financing by the United States, Norway and the United Kingdom. Projections for global average temperature rise is in the range of 1.1-6.4°C; a doubling of CO₂ (from pre-industrial 280 ppm) and average sea level rise is in the range of 0.18-0.59 m (Meehel et al. 2007) and 0.5–2.4 m (Brown et al. 2013). Hot extremes, heat waves and heavy precipitation events will continue to become more frequent. Projected data show that there is an increasing global trend in the rise of average temperature in all countries, regions or sub-zones; a decreasing trend in average precipitation in most sub-tropical areas and an increasing trend of precipitation in most of the tropical and high latitudes.

Introduction

Maize (Zea mays, or corn as it is known in some countries) is the principal cereal crop in tropical and subtropical regions throughout the world. The increasing use of maize as a staple food reflected the much higher yields per hectare, compared with wheat, rye and barley. Because maize was cheap, it became the dominant food and main source of dietary energy and protein for poor people, particularly those in rural and underprivileged segments of society. Maize is considered to be a native of the Americans. There are different views about the introduction of maize in India. One view is that maize was introduced into India by the Portuguese during the seventh century. Other view is that maize was introduced in Pre-Colombian era through the Atlantic Arabian trade route. This is supported by the more recent variability that has been observed in the maize collections made from the north eastern Himalayan region. However, the historic records regarding the cultivation of maize in India date back only to the Maratha Empire.

Introduction

Rice is grown in more than 100 countries in the world and is an important crop for nutritional security of large part of the population. World rice production in 2007 was approximately 645 million tones. Around 50 countries have an annual production of more than 1 million tones. Ninety percent of the total rice is produced in Asian countries, with two countries, China and India, growing more than half the total crop. Top ten rice producing countries are China, India, Indonesia, Bangladesh, Vietnam, Thailand, Myanmar, Japan, Philippines, and Brazil. In Bangladesh, Cambodia, Indonesia, Lao PDR, Myanmar, Thailand, and Vietnam, rice provides 50-80% of the total calories consumed. Major part of the rice is consumed locally where produced and only 6-7% of world rice production is traded internationally.

Introduction

Barley is an important cereal crop grown all over the world and is used mainly for feed and malt purposes and little for human food. Barley is the world’s oldest grain, as evidenced by discoveries in ancient cities in the Middle East and North Africa. It has been cultivated for about 8,000 years, and today is the world’s fourth largest cereal crop. Considerable evidence is available that points to the role of barley as sustaining food source in the evolution of humans. Additionally, alcoholic beverages of various types and fermented foods prepared from barley are commonly referred to in the ancient literature. As other food crops (wheat, rice, corn and rye) became more abundant, barley was relegated to the status of “poor man’s bread”. In the United states, barley used as food is 1.5%, as animal feed 65% and in malt and alcohol production 30% (Newman and Newman, 2006). In 1991, barley used as food in European countries was even lower (0.3%) than the United States. In contrast, during the same time period food was the largest for barley in Morocco (61%), China (62%), India (73%), and Ethiopia (79%). However, current consumer interest in nutrition and human health may help restore barley’s status in the human diet. Nutritional qualities of barley have been known since ancient times. For example, Ajgaonkar 1972 described how ancient Indian physicians effectively stabilized type II diabetics some 2400 years ago. Treatment was remarkable simple and not really different from recommendations that are given to diabetic patients today, i.e., lose weight, change diet, and increase exercise.

Introduction

Improvement of wheat grain quality depends on the knowledge of quality requirements of different end-use products and the genetic components controlling different quality traits. In previous chapters we have dealt in-depth with quality requirements of different end-use products and their genetic components. Depending upon the goal of quality improvement, different strategies are adopted to improve wheat quality. It depends upon the number of genes controlling the traits as well as the availability of the simple methods for phenotyping the traits especially during early segregating generations. In addition stability analysis of the traits across the environments is essential before we go for breeding. Constraints in time, cost, and sample availability usually necessitate the use of predictive tests during early generations, followed by milling and baking tests on advanced lines that have met a number of agronomic, disease and predictive quality criteria. Knowledge of germplasm lines having specific quality traits is needed to initiate breeding for the improvement of wheat grain quality for different end-use products. The quality requirements of different major end-use products are provided in the following table (Table 1).

Introduction

Nutritional value of food stuff is defined by its ability to provide nutrients required by the body. Proteins, carbohydrates, fats, minerals and vitamins are main ingredients in food stuffs. Wheat is an important source of these nutrients. The distribution of nutrients within wheat kernel is typical of many cereals. Nutrients are generally found in the highest concentrations in the germ or embryo and in the aleurone cells surrounding the starchy endosperm followed by bran, whole wheat flour and white flour in decreasing order. Of special importance is that it contains the entire B complex, except for vitamin B12. B vitamins function as cofactors in many metabolic reactions involved in the release of energy. The germ, which includes the scutellum, is especially rich in vitamins B and E, high quality protein, unsaturated fats, minerals, and carbohydrates. The bran consists mostly of the insoluble carbohydrate cellulose, and contains incomplete protein, traces of B vitamins, and minerals including zinc and iron. The endosperm is the largest part of the grain, and consists mostly of the carbohydrate starch, incomplete protein, and trace amounts of vitamins and minerals. Significant variations in the content of grains occur because of variety, crop year, area, fertilizer, and soil type.

Introduction

Carbohydrates constitute nearly 80% of the total dry matter of wheat kernel. Starch is the predominant form, with cellulose, hemicellulose and pentosans present in lesser amount. Starch is present in discrete granules within the cells of the endosperm. Starch content is available in the range of 65% to 75% and generally related negatively to the protein content. Starch structure is a crucial determinant of many end-product uses of wheat. While the amylose /amylopectin ratio is a useful descriptor of starch structure, a more complete analysis of the population of the molecules which constitute a particular starch is considerably more revealing. The molecules range from the high degree of polymerization (10⁷ – 109 glucose units) and heavily branched amylopectin population, to the lower degree of polymerization (103 -106 glucose units), and infrequently branched amylopectin population. Starches with widely differing structures are suited to particular end uses. For example, starches with no amylose, the so called waxy starches are particularly suited to use as thickeners or gel forming agents because they form a clear stable gel with little retrogradation. In contrast, starch with high amylose content form hydrogen bonded insoluble aggregations which are suited to use in adhesives, plastics and as a source of dietary-fibre starch. The size and branching pattern of starch are also important determinants of the suitability of starches for particular end-uses due to the effects these parameters have on gelatinization temperature, starch swelling and viscosity.

Introduction

Bread wheat (Triticum aestivum L.) is one of the most widely cultivated and consumed crops in the world. Wheat is perhaps best known for its different end-use baking properties as determined by grain texture, protein content and quality. Wheat is generally traded by and classified into “hard” and “soft” market classes on the basis of grain hardness or texture of the wheat kernel (caryopsis). Soft wheats have softer endosperm texture that fractures easily, therefore requiring less energy to mill, yields smaller particles, and has less starch damage after milling when compared to hard wheats. Hard and soft are used with slightly different connotations in different parts of the world. In Western Europe, hard is applied primarily to durum wheats and the soft applied to bread wheat. Elsewhere the term is applied to different cultivars within the species Triticum aestivum. In general, hard wheats are used for bread baking, while soft wheats are used for cookies and cake making. Hard wheat requires more force to crack the kernel, maintains a larger particle size, passes through sieves more easily and has more damaged starch MacRitchie (1980). Higher starch damage is required for good bread making quality Tipples et al. (1994) but is detrimental to the biscuit making quality.

Introduction

Wheat is the most important cereal crop to the human kind. It is the main source of energy and nutrition in human diet. Wheat is consumed in the form of large number of end products as chapati, bread, biscuit, cakes, pretzels, noodles and pasta products. Millions of people are involved in milling, baking and pasta products industry with huge turnover per annum. However, each end-use product of wheat has it’s own specific requirement for example basically hard wheats along with strong gluten and high protein content are used for bead making. Soft wheat with weak gluten and low protein content are required for biscuit making Souza et al. (1994). Durum (tetraploid) wheat is used for pasta products as macaroni, vermicelli and spheghatti and Dicoccum for therapeautic purposes. Often chemical improvers are used to improve the dough properties for these products. Most of these chemicals have been banned because of their toxic effects. Therefore, only alternative is to develop varieties suited to meet the requirements of these end-use products. This needs better understanding of molecular basis of grain quality to accelerate breeding for producing wheat varieties for each end-use product separately. Storage proteins are the major component of grain which determines end-product quality. In this chapter detailed structure, genetics and functionality of gluten proteins are described.

Introduction

Dough is a complex mixture of flour constituents, water, salt and other ingredients depending upon the requirements of end-products. It is the principal intermediate stage in the transformation of wheat into different end-use products. Rheological properties of dough determine the behaviour of dough during mixing, rounding and molding used in making different products and also effect on the quality of finished product. Therefore, understanding the various features of dough rheology and their relations with product quality is important. The importance is enhanced further because of mechanization and automation of baking industry. Dough is composed of continuous phase in which gas cells are dispersed. The continuous phase is called “dough phase”. It consists of starch granules embedded in protein matrix along with some lipids, cell remnants and yeast cells in fermented dough. Gas production and retention is the most comprehensive quality requirements of the dough for bread making. The ability of the wheat dough to retain gas during fermentation and oven rise is unique. This depends on the ability of the dough to be stretched into thin membranes because of protein phase.

Introduction

Durum or macaroni wheat (T. turgidum var. durum) is an important crop used chiefly for the production of pasta in Western Europe and North America, and two layered bread, single layered bread, burghul, couscous, pasta, frek and feed in other parts of the world (Table 1). In North Africa and the Middle East, durum is also used for producing flat breads. On a global basis only a small amount of durum wheat is used for baking of pan-style and hearth-style bread. Also, durum wheat for baking is often used in blends with common wheat. In India, durum occupies approximately 2.0 mha area and production is estimated to be around 2.5-3.0 million tones annually amounting to 3-4% of the total wheat production. The consumption of pasta is increasing at the rate of around 5% annually and currently it is estimated to be around 10 Lakh tones. The demand for pasta products may increase further due to increasing population and improving standard of living.

Introduction

For many years it has been an elusive task to provide a precise definition as to what constitutes quality in wheat. Each country has its own traditions in bread and other bakery products. Quality will mean different things to a miller, a baker, a grain handler or a plant breeder. As the baking industry becomes increasingly specialized, specific qualities are sought. Even among those wheat varieties generally recognized as having desirable quality traits, the influence of environment can be substantial, and this necessitates a high level of skill on the part of grain buyers to survey the current year’s crop and blend the wheat for a specific end-use. This genotype X environment effect on quality also limits the capacity of end-users to source identity-preserved wheat from a narrow geographic area. Those of us engaged in the field of plant breeding are concerned primarily with those traits that can be manipulated genetically, and we study their stability under a range of climatic conditions. Constraints in time, cost, and sample availability usually necessitate the use of predictive tests during early generations, followed by milling and baking tests on advanced lines that have met a number of agronomic, disease and predictive quality criteria.