eChapters

Underutilized crops can be found in many different agricultural ecosystems, but they are mainly grown by small landholders in the marginal areas especially in hill agriculture. Some crops remain underutilized because they are in some way not competitive with other species in the same agricultural environment. They are usually characterized by having local importance in consumption and production systems, requiring relatively low inputs, adapting to specific agro-ecological niches, receiving scarce attention by national agricultural and biodiversity conservation efforts, mainly consisting of local types or landraces, and being cultivated with indigenous knowledge. Many underutilized species are adapted to low-input agriculture and depended on by a large number of people in marginal areas in hill agriculture of developing countries.

This chapter attempts to provide a detail picture of one such underutilized crop i.e. Grain Amaranth. In an effort to explain the decrease in grain amaranth cultivation, fanciful myths have arisen. The mystery is especially intriguing when one considers that maize, with which amaranth co-evolved, was selected and developed into a major world crop. The small seed size of amaranth may have been a partial cause for the reduction in amaranth cultivation. A small seeded crop, such as amaranth, requires greater attention to detail in the early parts of the growing season than does a larger seeded crop, such as maize.

This chapter discussed all the factors related to its cultivation, the constraints in the production and importance of grain amaranth in the economy of hill agriculture etc.

7.1 Introduction

Soil is an essential component of ecosystem sustaining all living vegetation, microorganisms, herbivores and carnivores. It is the outermost layer of the earth. It varies greatly in its physical and chemical properties which depend on its age and on the conditions (parent material, climate, topography and vegetation) under which it was formed. Processes such as leaching, weathering and microbial activity combine to make a whole range of different soil types, each of which has particular strengths and weaknesses for agricultural/ horticultural production.

The materials present in the soil are mostly in three states, i.e., solid, liquid and gaseous. They differ in their percentage from soil to soil. A good soil should have 5% organic matter, 45% mineral matter, 25% air and 25% water. So, while establishing an orchard, whole soil profile should be taken into consideration. Digging a pit shows the different layers of soil profile. Usually these are same and not distinct in many areas. Inorganic materials are the major component of most soils. They consist largely of mineral particles with specific physical and chemical properties which vary depending on the parent material and conditions under which the soil was formed. It is the inorganic fraction of soils which determines soil physical properties such as texture and has a large effect on structure, density, water retention and aeration. Air and water percentage in soil vary significantly with soil texture and weather conditions. The soil texture is a property which is determined largely by the relative proportions of sand, silt and clay particles content in it. The classification of soil based on particle size is termed as textural classification of soil. As per USDA classifications, clay particle size is less than 0.002 mm, silt size varies in between 0.002 to 0.05 mm and sand size in between 0.05 to 2.0 mm. On the basis of percentage of these particles present in a soil, the type of soil can be easily determined.

Climate change is increasing the likelihood that invasive insects will establish, spread and cause economic damage in new geographical regions. Invasive species commonly possess high reproductive capacity, broad host ranges, environmental tolerance, ecological adaptability and competitive advantages. Rising temperatures and changing humidity and rainfall patterns can create favourable habitats beyond their traditional ranges. Extreme weather and global trade may further support their movement and establishment. Once introduced, invasive insects can compete with native species, disrupt ecosystems and cause serious crop losses. This chapter examines the relationship between climate change and invasive insect pests and emphasizes early detection, quarantine, surveillance, forecasting and coordinated management.

Crop production broadly depends on the fertility of the soil where a crop is raised. There are several factors like the kind and quality of seed, climate, water supply, and plant protection measures etc. that affect the crop production. Among these factors, the fertility status of the soil largely determines the ultimate yield even if all these factors are optimum for crop production. A clear distinction should be made between soil fertility and soil productivity. Soil fertility deals with the inherent capacity of soil to provide nutrients in adequate amounts and in proper balance, for the growth of specified plants when other growth factors such as light, water and temperature, and the physical condition of the soil are favourable. Soil productivity is concerned with the capability of soil to produce a specified plant or plant parts or a sequence of plants under well defined and specified systems of management inputs and environmental conditions, viz. climatic conditions. It does not mean that a fertile soil is always productive. A fertile soil, under a bad management system, may be unproductive for a crop. In this book, plant nutrient elements and their available forms, functions and deficiency symptoms are briefly described for the better understanding of soil testing and fertilizer recommendation.

What is Artificial Intelligence

‘Artificial’ is taken to mean a property of a human-made machine. ‘Intelligence’ will be that when something is able to perform a new action or change its state to achieve the optimal response it could perform given external inputs. This term is coined by- John McCarthy (American computer and cognitive scientist) during 1956 So, AI is basically a machine able to mimic human intelligence by having the ability to predict, classify, learn, plan, reason and perceive.

AI is an emerging technology in the field of agriculture. AI-based equipment and machines, has taken today’s agriculture system to a different level. This technology has enhanced crop production and improved real-time monitoring, harvesting, processing and marketing . The latest technologies of automated systems using agricultural robots and drones have made a tremendous contribution in the agro-based sector. Various hi-tech computer-based systems are designed to determine various important parameters like weed detection, yield detection and crop quality and many other techniques.

Homogenization is now a widely used industrial process in dairy production, essential for stabilizing milk and other liquid dairy products. Its main purpose is to prevent fat from separating out of the milk, ensuring a smooth, consistent, and uniform product. Milk is a complex emulsion comprising water, fat, proteins, carbohydrates, minerals, and vitamins. Among these constituents, fat plays a critical role in determining the texture, flavor, and overall sensory quality of milk and dairy products. In its natural state, milk fat exists in the form of globules of varying sizes, surrounded by a thin membrane that stabilizes them in the aqueous phase. These fat globules typically range in size from 2 to 10 μm and have a lower density than the surrounding water-based phase of milk. This difference in density causes the fat globules to rise and form a cream layer when milk is left undisturbed, leading to an uneven texture and separation during storage.
Homogenization is a mechanical process applied to milk to modify fat globules by forcing the milk under high pressure through a tiny orifice. This reduces the average size of the fat globules while increasing their number and surface area. Practically, this greatly minimizes the tendency of fat globules to rise and form a cream layer. The enhanced stability of homogenized milk is due to three key factors: the reduction in the average diameter of fat globules, as described by Stokes’ Law, which slows their upward movement; the uniformity in size distribution, which ensures globules rise at similar speeds, preventing clustering; and the increased density of fat globules caused by the adsorption of a protein membrane, bringing their density closer to that of the surrounding liquid. Additionally, heat pasteurization complements homogenization by breaking down the cryo-globulin complex, which otherwise promotes clustering and cream formation.
The smaller and uniformly dispersed fat globules create a smoother, creamier texture and enhance the mouthfeel. This process also contributes to the visual appeal of milk, making it appear whiter and more uniform. Homogenization is, therefore, an essential step in modern dairy processing, ensuring the stability, quality, and consistency of milk and other dairy products, while addressing the challenges posed by the inherent properties of milk fat and its lower density.

Terrace farming is a widely practiced agricultural method in India, particularly suited for hilly and mountainous areas. It involves shaping the landscape by carving out flat sections—known as terraces—into the slopes of hills or mountains. These levelled surfaces make it easier to cultivate otherwise steep and challenging terrain. This age-old technique, also known as step farming, creates a series of stepped platforms that resemble a staircase along the hillside. The approach is both practical and resourceful, allowing farmers to use sloped land efficiently for crop cultivation.
The primary motivation behind transforming large hill surfaces into terraces— despite the considerable labor it demands—is to control the rapid downhill flow of water that typically occurs in such regions. However, terrace farming comes with its own set of challenges. The soil on terraces often has limited water retentioncapability, and erosion can become more severe. Nutrients and soil particles tend to be washed away into rivers. In addition, if trees are cleared for farming, the land becomes vulnerable to landslides and mudslides during periods of heavy rainfall. Terrace farming is a prevalent agricultural practice in India, especially in regions characterized by hilly or mountainous topography. This method involves the creation of flat, horizontal plots—referred to as terraces—along the natural contours of slopes. These terraces transform steep, uneven land into cultivable platforms, making farming on such terrain more manageable and productive. Also known as step farming due to its resemblance to staircases carved into hillsides, this traditional technique is both efficient and adaptive. It enables the utilization of sloped land that would otherwise be unsuitable for agriculture. The primary reason for undertaking this labor-intensive process is to manage the rapid runoff of water common in elevated terrains. By interrupting the slope, terraces help slow water flow and reduce surface erosion. Nevertheless, terrace farming poses several challenges. The soil tends to have limited capacity to retain moisture, and erosion can still displace vital topsoil and nutrients. Furthermore, deforestation to create terraces can heighten the risk of landslides and mudflows during intense rainfall.

Introduction
Metal-catalyzed C–N cross-coupling reactions are powerful synthetic methods for producing both simple and complex organic compounds, including natural products. These methodologies typically involve shorter reaction times and can achieve good to excellent yields with a broad range of reactions, exhibiting high regioselectivity in certain cases. The coupling of carbon and nitrogen to create organic compounds that contain nitrogen, such as urea and amides, is one of the most fundamental chemical reactions and plays a crucial role in human civilization. C–N coupling reactions have significant importance in industry, starting with the production of ammonia (NH3) through the Haber–Bosch process. Molecules containing C–N bonds are prevalent in a variety of organic materials, natural products, pharmaceutical compounds, and agricultural chemicals. This wide applicability makes them crucial chemicals, leading synthetic organic chemists to continuously seek out novel synthetic methods. In recent years, numerous synthetic strategies involving either transition metals or metal-free enzymes and biocatalysts have emerged. Additionally, new technologies, such as electroreduction, have been employed in these C–N coupling processes (Bariwal & Van der Eycken, 2013, Li et al., 2022, Yin et al., 2024, Rahman et al., 2022).
Common copper salts/complexes, and diamino ligands
Copper is commonly found coordinated by two, three, or four ligands, resulting in linear, trigonal planar, or tetrahedral geometries. Well-known and inexpensive copper halides, such as copper (II) glycinate, copper (II) acetylacetonate (particularly CuI), copper acetates, copper oxide, copper sulfate, and copper triflate salts, are widely used as catalytic systems in C–N bond-forming reactions. Additionally, other complexes such as Cu di-isopropyl salicylate (CuDIPS), copper phthalocyanine, and copper aspirinates have also been employed in these reactions. Copper-catalyzed azide-alkyne cycloaddition (CuAAC) reactions are well-established methods for forming triazoles via C–N bonds in one pot. These reactions often involve domino click chemistry and green approach methodologies, leading to the synthesis of biologically important triazoles. Copper salts in combination with diamine ligands are widely used in C–N bond-forming reactions through cross-coupling strategies. Some notable examples of such diamino compounds that can coordinate with copper are illustrated in Figure 1.

Bioshields offer barriers of vegetation, shrubs, small and big trees and if integrated as a well designed system they can greatly help our coastal as well as inland areas. Though primarily looked at for coastal regions, under a broader definition Bioshields can play important role in semi-desert areas, hills, etc. also.
Why Bioshield ?
Bioshields or Biobarriers can make a major contribution in minimizing the effects of storms, cyclones and Tsunamis and at the same time offer short and long term ecological and livelihood benefits.
• Bio-Shields in coastal areas include raising mangroves, casurina, palms, bamboo & other tree species and halophytes like Salicornia, etc. followed by other regular plants for the land.
• They serve as speed-breakers under conditions of coastal storms, cyclones and tsunami.
• In addition, they serve as carbon sinks, since they help to enhance carbon sequestration and sustainable fisheries and agriculture.
• Integration of Bio-shield with livelihood options and eco-restoration by developing different site specific models is therefore very important.
For example- the case of two villages near Kalpakkam in Tamil Nadu is often taken. During the devastating Tsunami sometime back, the village with plantation- a natural bioshield was saved with hardly any loss of life as against a nearby village with no natural bioshield. Several such examples are available world over. This indicates that if we can have a good, scientifically designed bioshield, it can be of a great help. This concept is bound to get much greater emphasis when we consider the increasing effect and danger due to climate change in the coming years.

Indigenous knowledge plays a pivotal role in the sustainable management and conservation of fish populations. Rooted in centuries-old traditions and practices, these systems offer unique insights into local ecosystems, seasonal patterns, and species behavior that are often overlooked by conventional scientific approaches. Indigenous knowledge can acknowledge fish conservation, emphasizing its value in fostering biodiversity, maintaining ecological balance, and supporting livelihoods in fishing communities. Traditional fishing practices, community-based resource management, and cultural norms contribute to the sustainable use of aquatic resources. There are so many challenges such as the erosion of indigenous knowledge due to climate change, environmental degradation, and policy neglect. By integrating indigenous practices with modern conservation strategies, for a collaborative approach that respects and harnesses traditional wisdom to ensure the long-term sustainability of fish populations and aquatic ecosystems.

Programme evaluation requires appropriate frameworks that can connect programme resources and activities with measurable learning, behavioural and developmental outcomes. This chapter presents two important tools for agricultural extension evaluation: Bennett’s Hierarchy of Evaluation and the Logical Framework Approach (LFA). Bennett’s Hierarchy provides a structured progression from programme inputs and activities to participation, learning, behavioural change and ultimate social, economic and environmental results. Its particular value in agricultural extension lies in linking educational interventions with observable changes among farmers and communities. The chapter explains its conceptual foundation, seven levels, applications, advantages and limitations. The Logical Framework Approach is introduced as a systematic tool for programme planning, monitoring and evaluation. It organizes programme goals, purposes, outputs and activities within a logical results framework and incorporates objectively verifiable indicators, means of verification and assumptions. The chapter also discusses participatory logical frameworks, Results-Based Management, Outcome Mapping, Theory of Change, Goal-Oriented Project Planning and Objectives-Oriented Project Planning, thereby providing complementary approaches for designing and evaluating development programmes

Abstract

Quercus species of family Fagaceae are very important from both economic and ecological perspectives. These exhibit irregular fruiting, and produce seeds recalcitrant to storage, thereby difficult to propagate through conventional procedures. Again because of their very difficult to root nature, extremely limited success has been observed in vegetative propagation. Application of new technological approaches like in vitro propagation may be of interest for accelerating tree improvement programs to these hardwood species. This review provides a summary of the advancement in the application of in vitro propagation to oak species of Kumaun West Himalaya India.

Introduction

In the annals of history, the term “Renaissance” evokes images of a time marked by profound cultural, artistic, and scientific rebirth. The Renaissance of the 14th to the 17th century was characterized by an extraordinary surge in creativity and intellectual achievement, which laid the groundwork for the modern world. Today, we find ourselves at the cusp of a new Renaissance—a Digital Renaissance—propelled by the rapid and relentless advancements in technology. This new era, like its historical counterpart, is marked by a transformative shift that is redefining every aspect of human life, from how we work and communicate to how we learn and govern.

This chapter delves into the essence of this transformative era, exploring the fundamental technological innovations reshaping our world and their far-reaching impacts on society. We will examine the pivotal technologies driving the Digital Renaissance, including artificial intelligence, blockchain, the Internet of Things (IoT), and other emerging technologies such as virtual and augmented reality and 5G networks. By understanding these technologies and their applications, we can appreciate how they collectively contribute to a digital transformation that is as revolutionary as the artistic and scientific achievements of the past.

Origin and Concept of SHGS
    
The origin of SHGs is from the brainchild of Grameen Bank of Bangladesh, which was founded by Mohammed Yunus.  SHGs were started and formed in 1975.  In India NABARD is initiated in 1986-87.  But the real effort was taken after 1991-92 from the linkage of SHGs with the banks.  A SHG is a small economically homogeneous affinity group of the rural poor voluntarily coming together to save small amount regularly, which are deposited in a common fund to meet members emergency needs and to provide collateral free loans decided by the group (Jha 2000).  They have been recognized as useful tool to help the poor and as an alternative mechanism to meet the urgent credit needs of poor through thrift (Rao 2002) SHG is a media for the development of saving habit among the women (Rajamohan 2003).  SHGs enhance the equality of status of women as participants, decision-makers and beneficiaries in the democratic, economic, social and cultural spheres of life.  (Jain 2003).

Mammals are homeothermic, meaning that they have the ability to control their body temperature within a narrow range in an environment whose temperature may change over a wide range.

India is experiencing a phenomenal spurt in the growth of livestock and poultry sectors through various timely and quality measures scientifically over a few decades. Milk production rose by a large leap from about 17.0 million tones in 1950 to about nearly 100 million tones in 2005 standing first in the world for maximum quantum of milk production. From about a ‘naught’ during 1950, the commercial layers have increased to 220 millions in 2005 producing 4500 crores of eggs every yearranking 5th in the world. The meat production is absolutely fascinating with 20 million birds in 1960 to about 2100 million in 2005 (Table 10.1).

5.1. Cultural methods

5.1.1. Eradication

Elimination of pathogen after it has become established in the area where host is growing.

The field is ploughed once and harrowed twice or thrice until the soil becomes well puddle. Beds are made slightly raised of 1 – 1.5 m in width and conveniently large in size and drainage channels in between the beds. The total area of nursery required to plant one hectare of land is 20 cents (800 m2 ). This method is suited where assured irrigation facilities are available. The beds should not be allowed to dry because they develop cracks and the seedlings will get spoiled. This method keeps down the weeds in the nursery. Seedlings are transplanted at 21-25 and 25-30 days age for SDV and MDV, respectively. Sparse sowing is recommended in case of hybrid rice. One kg of hybrid seed is sown in one cent area of nursery. This helps in good tillering and robust seedlings and makes it possible to transplant single seedling per hill. Seedlings are planted at 20-25 days.

Insects and mites that damage crops, pathogens that cause diseases in plants, weeds that compete with field crops for nutrients and water, plants that choke irrigation channels or drainage systems, rodents that eat young plants and grain, and birds that eat seedlings or stored foodstuffs are all crop pests. As plants were domesticated and grown, increasingly in monoculture, the potential damage caused by their co-evolved pests and disease pathogens were realised.

2.1 Function

A variable ‘Y’ is said to be the function of an other variable ‘X’ if for every value of ‘X’ there exists a corresponding value of ‘Y’. It is denoted as Y = f (X). The function f (X) is a relationship between two variables (Y, X) which associates any given number x with another number y.

A function is a mapping or transformation of x into y and is denoted by y = f(x). The variable X represents the elements of the domain ‘D’ and is called the “independent variable”. The variable ‘Y’ represents the elements of the range ‘R’ and is known as the “dependent variable”.

17.1. Introduction

Tea (Camellia sinensis L), coffee (Coffea arabica L.) and rubber (Hevea brasiliensis) are known as estate crops or conventional plantation crops. These plantation crops are perennial in nature and cultivation of these crops generates considerable employment opportunities during on farm and off farm processing activities. The plantation crops are high value industrial crops contributing about 25% of AGDP. India is a largest consumer of tea accounts for 22% global tea consumption and also accounts for one-fifth of global tea area. Indian coffee industry also have prime place among plantation crops and also contributing 4% coffee to global market. Similarly, rubber plantations also provides basic raw material to toys, balloon, tyres, seed oil cake and rubber wood factory. The plantation crops along with main processed products also produce large quantity of biomass like husk, coir dust, coffee husk, tea waste, shedding etc which can effectively used to reduce nutrient requirements of crops. Parchment coffee prepared by using the wet method is generally favoured by the market. Cherry coffee, due to its very nature of preparation and longer contact with the mucilage and fruit skin, is usually associated with a characteristic fermenting flavour.