eChapters

Estimation of Magnesium in Feeds, Fodders and Faeces
(Gravimetric method - AOAC, 1965)
Principle

Evaporation of calcium free filtrate is carried out to drive off ammonium chloride and nitric acid is added to decompose ammonium salts, which is then subsequently driven off by evaporation. NH₄Cl + HNO₃ = HCl + NH₄NO₃ (driven off). Sodium citrate in solution yields citric acid which has got a tremendous effect on aluminium and iron in that the citric acid keeps these materials in solution.

At neutrality, first the normal magnesium phosphate is formed, which is then turned to magnesium ammonium phosphate, which on incineration gives rise to magnesium pyrophosphate (Mg₂P₂O₇).

Abstract

In the recent past we have seen a great upsurge in the production and productivity of food grains as well as horticultural produce which is sufficient to feed our burgeoning population. This way we are self-sufficient to feed our population, but now the major challenge before us is to ensure the nutritional security of each and every individual of the country. Moreover, meeting nutritional security through conventional or molecular breeding demands long time. However, this could be achieved in much shorter period of time i.e., within 2-3 weeks by growing microgreens.Microgreens can be easily characterised by having a central stem with two fully developed cotyledon leaves and mostly one pair of small true leaves.In comparison to their mature counterparts, microgreens of a variety of vegetables and herbs have been reported to be more nutritious. They are rich in ascorbic acids, carotenoids, phylloquinone and tocopherols, which is responsible for its antioxidant properties and also plays a vital role in weight gain modulation, cholesterol metabolism. It may also protects from cardiovascular diseases by preventing hypercholesterolemia. Main problem associated with microgreens are their high price and high perishability and lack of awareness among people about its cultivation practices and health benefits. It demands great attention from the scientific community, to address these problems and make it available in each and every household to ensure the nutritional security of the nation.

5.1. INTRODUCTION

Mean and standard deviation summarizes the salient features of a data set. But they do not describe adequately the full characteristics of the data. For an adequate description of the characteristics of a data set, a convenient method is to plot a frequency distribution curve. Such curve is constructed by first drawing a frequency polygon, which may then be smoothened to a frequency curve, indicating the distribution. The frequency curve or distribution of specific biological variables generally has a specific form and plays a very important role in statistical theory and practice. It is customary to describe a curve in terms of its symmetry or assymmetry and its flatness or peakedness.

The following types of distribution are commonly seen in the biological world:

Southern pea / black eyed pea are the other names associate with cowpea. It is grown for vegetable and also as pulse crop and varieties are specific for use.

Classification of Cowpea
1.    Vigna unguiculata (L.) Walp. Cv. Sesquipedalis: yard long bean or asparagus bean: Possess long pods and used as vegetable. 
2.    Vigna unguiculata (L.) Walp. Cv. Cylindrica: dual purpose, i.e. vegetable and pulse 
3.    Vigna unguiculata (L.) Walp cv. Radiata: Pulse type.
 
More emphasis is given for pulse types for crop improvement. Less attention is given to vegetable types. Pole and bush types are available in vegetable type. Cowpea improvement is from vine to bushy habit with low fiber content and low glucosides and increased protein content.
Origin and Distribution: Cowpea is in cultivation from ancient times in the tropics of old world. Country of origin is uncertain. In India, it has been known from the vedic times. Vavilov (1939) considered India as the primary centre of origin. But it is now generally agreed that Africa is centre of origin since wild forms are found in Africa and in Asia wild forms are absent (Smartt, 1990). Faris (1965) concluded that, cowpea arose from domestication of wild form Vigna unguiculata ssp dekindtiana in West Africa. But domestication is actually happened in Ethiopia and dissemination was West wards Africa, East ward across the Indian Ocean. It has spread from Africa to Asia and Europe through Egypt. Introduced to West Indies in 16th century by Spaniards and was taken to USA around 1700. Now cowpea is widely distributed throughout the tropics and subtropics.

Introduction

The characteristic features of a city are the result of the combination of various factors like topography, climate, history, economy, culture, etc. since these characteristics vary; every town/city is unique and has certain distinctive characteristics. These urban characteristics are, however, never static. They change both over time and space.

With the development of the economy, other factors like population growth, urbanization and improved technology have a combined effect on urban settlements, which grow bigger and more complex. The study of the internal structure of cities by urban geographers is a study of the structural and demographical variations (i.e., variations in building size, shape, height, function and social status) of urban settlement.

Theories on the Internal Structure of Cities

The internal structure of cities has attracted many generalizations in the form of theories. These theories have attempted to explain the city structure by examining cities at any location in a country largely from sociological viewpoint. The different theories on the internal structure of cities are the Concentric Zone theory of Burgess, Sector Theory of Hoyt, the Multiple Nuclei Theory of Ullman, the Social Area Analysis of Murdie and the Exploitative Model of William Bunge.

Previous Year Questions

1. Intellectual property rights (IPR) are the rights given to persons over the creations of their minds: inventions, literary and artistic works, and symbols, names and images used in commerce. They usually give the creator an exclusive right over the use of his/her creation for a certain period of time?

2. Plant varietal protection?

• The importance of intellectual property was first recognized in the Paris Convention for the Protection of Industrial Property (1883) and the Berne Convention for the Protection of Literary and Artistic Works (1886). Both treaties are administered by the World Intellectual Property Organization (WIPO).

Seeding /Sowing

Seeding is the process of planting seeds in soil to grow crops, plants, or grass. It is a fundamental step in the cultivation of plants and is essential for agricultural production, landscaping, and reforestation. The goal of seeding is to establish and promote the growth of desirable plants, allowing them to germinate, develop, and eventually mature into a full-grown plant, tree, or crop.

The process of seeding typically involves placing seeds at a specific depth in the soil, providing the necessary conditions for germination (such as water, light, and temperature), and ensuring proper spacing between seeds to allow for healthy plant growth. The choice of seeding method and the timing of seeding can vary depending on the type of plant or crop being grown and the specific environmental conditions of the planting area.

Seeding can be done manually by hand; using specialized seeding tools and equipment, or through mechanized methods, such as using tractors and seed drills for larger agricultural operations. The success of seeding is crucial for the establishment of healthy and productive plants, making it a critical step in agriculture and horticulture.

Introduction Insects are the largest group of individuals in the phylum Arthropoda. They are the most dominant species on earth, as they originated 480 million years ago. Insects account for damage to agriculture produced through pest incidence; they also render benefits through pollination services, reduction in pest population as natural enemies, and various other services. Utilisation of beneficial insects like silkworms, honeybees, and lac insects for their products was well known to Indian people way back. In the current chapter, opportunities for the utilisation of some of these beneficial insects for emerging businesses are discussed.

Insect farming

By 2050, there will be a 60% increase in the global need for proteins, driven by the unrelenting growth of the human population. What is very disturbing is that present protein manufacturing uses very unsustainable methods, in addition to this exponential increase. The ecosystem is under a lot of stress from traditional farming practices, which also contribute to the loss of already depleted wild fish species and water supplies. By 2050, there will be 10 billion people on the planet, and to feed them sustainably, new farming options such as insect farming will be necessary. Due to their rapid rates of reproduction and high protein content, insects are extremely simple to produce (Igini, 2022).

7.1 What is Chemotaxonomy?
The approach of taxonomy in which chemical features of plants are used in developing classifications or in solving taxonomic problems is called chemotaxonomy, chemosystematics, chemical taxonomy, chemical plant taxonomy or plant chemotaxonomy. Some of the basic chemical features or evidentiary characters include alkaloids, flavonoids, carotenoids, polysaccharides, terpenoids, fatty acids, amino acids, aromatic compounds, etc.
The chemical evidences are useful in establishing relationships among taxa is exemplified (Cronquist, 1980) by the (i) Presence of aromatic plants in Juglandales, (ii) Production of betalains and not anthocyanins by the members of caryophyllales, (iii) Presence of highly aromatic compounds in the members of Lamiaceae, (iv) Presence of alkaloids in Solanaceae, and (v) Presence of tanniferous plants in Sapindaceae.
7.2 Purpose of Chemotaxonomy
Chemotaxonomy has been used at all levels of the hierarchy of classification starting from the rank of ‘variety’ up to the rank of ‘division’ in plants. Moreover, chemical evidences have been used in all the groups of the plant kingdom starting from simple organisms, such as fungi and bacteria, up to the most highly advanced and specialized groups of angiosperms. These evidences are used in the classification of plants with two main purposes, (i) To develop such taxonomic characters which may improve the existing systems of plant classification and (ii) To develop the present day knowledge of phylogeny or evolutionary relationships of plants.

Abstract

In recent years the quest for improving the quality of life has ventured into many aspects of utilizing plants for the aesthetic sense. One such is an increased utilization of flowers /flowering plants for beautification of homes, offices, gardens etc. The increased interest in use of cut flowers has brought challenge of bringing in varieties of natural flowers from different sources. India’s rich biodiversity also contributes addition of lot of new species to the cut flower industry. Banana and Plantains have been revered only for their utility as dessert fruit or staple food. But aesthetic dimension has never been much explored. Musa comprises more than 50 species and sub species traversed across the tropical and sub-tropical regions of the world. Musa Ornata is one such plant, native to north eastern regions of India, belongs to the family Musaceae and section Rhodochlamys. It draws its attention by virtue of its bright inflorescence and its long lasting nature. It is a medium statured plant, hence suitable for gardens also. It is a fertile wild species, multiplies mainly through suckers and through seeds to some extent.

Biodiversity

Biological diversity, or biodiversity, is the scientific term for the variety of life on Earth. It refers not just to species but also to ecosystems and differences in genes within a single species. Everywhere on the planet, species live together and depend on one another. Every living thing, including man, is involved in these complex networks of interdependent relationships, which are called ecosystems. Healthy ecosystems clean our water, purify our air, maintain our soil, regulate the climate, recycle nutrients and provide us with food. They provide raw materials and resources for medicines and other purposes. They are at the foundation of all civilisation and sustain our economies. It’s that simple: we could not live without these “ecosystem services”. They are what we call our natural capital.

Pineapple is one of the most economically important fruits in tropical and subtropical regions and gaining popularity to the consumers all over the world. The pineapple plant has many specific morphological, anatomical and physiological characteristics that determine crucial aspects of pineapple crop management, such as water use efficiency, nutrient management, weed management, flower induction etc.

Water Requirements and Irrigation

Determination of water requirements and plant moisture status: Pineapple plant responds well to as much as 5 cm of water per month from rain or irrigation though it is a xerophyte type and is capable of good production under relatively meager water supply. Maintenance of available soil moisture in the root zone areas requires less water for pineapple than for other crops due to lower transpiration rates. Plants achieve this type of adaptability through a process called assuberization, where suberin act as a physical barrier, preventing water loss from the tissues it surrounds.Stomata remains closed as an effect of drought during the entire day. But, whenever the plants are grown with sufficient moisture in well-aerated soils produced well-distributed roots with numerous white root tips. It helps the water use efficiency and carbon f ixation that pineapple shows to drip irrigation. The pineapple leaf is a major water storage organ for the pineapple plant (Malézieux et al., 1993). When the leaves are full of water the cells present in upper mesophyll layer can occupy almost half of its volume. Invery little water-supply, the water in the mesophyll layer is absorbed by the plant. Generally, representative ‘D’-leaves are taken in a group of six to ten leaves and the total thickness is measured and compared with the thickness of fully turgid leaves.

Plant protection equipment, often referred to as PPE (Personal Protective Equipment) for agricultural or horticultural activities, includes various gear and clothing designed to protect individuals from potential hazards while working with plants, pesticides, or other agricultural materials. These items are crucial to ensure the safety and well-being of workers in the agricultural and horticultural industries. Common types of plant protection equipment:

1. Protective Clothing

Coveralls or suits to shield the body from pesticides, chemicals, and other substances.

Long-sleeved shirts and pants to minimize skin exposure.

Gloves to protect the hands from contact with pesticides, thorns, or other hazards.Safety goggles or face shields to safeguard the eyes.

2. Footwear Sturdy,

closed-toe boots or shoes to protect the feet from potential injuries and exposure to pesticides and plant debris.

Introduction

Throughout their existence on this planet, human beings have adapted to the diverse environments they inhabit. Depending on the topography and prevailing natural conditions, individuals have successfully navigated the challenges posed by nature and their surroundings. As life has progressed, humans have gained insights into nature, its resources, and the prudent utilisation thereof. This understanding encompasses various natural phenomena, the associated challenges, and the methods to mitigate them. Over time, humans have evolved into repositories of such knowledge, collectively known as 'indigenous knowledge' or 'traditional wisdom,' passed down from one generation to the next. Each specific region possesses its unique set of indigenous knowledge reflecting the harmonious coexistence of humans with their environment.

Indigenous agricultural knowledge (IAK) stands as a crucial force in the realm of agricultural development. It represents a systematic and collective body of knowledge, practices, and beliefs that evolve through adaptation processes and are transmitted across generations through cultural channels, elucidating the intricate relationship between living beings and their environment. With this collective wisdom, farmers have adeptly cultivated food crops in diverse environmental conditions and seasonal variations, relying on indigenous techniques in the absence of external inputs, resources, and scientific knowledge. This includes refraining from the use of synthetic agrochemicals and instead embracing practices like crop rotations and soil fertility restoration through closed nutrient cycles (Melash et al., 2023).

Introduction

‘Health is wealth’ is a common saying. Every individual should take care of his physical and mental health. During work performance, if an activity leads to any health problem it is referred to as an occupational health hazard, which needs urgent attention. In agriculture, occupational health problems sometimes amount to incurable diseases/disorders.

Meaning of Occupational Health Hazards

Occupational hazard is something that causes harm to a working person, in terms of injury or ill health, damage to property, workplace environment, or a combination of both. In India, farm women contribute as farmers, agricultural workers, and entrepreneurs. As per the 2012 census data, women’s share was 55%, which is projected to be 65% by 2025. They are the backbone of the agricultural rural economy but still are one of the most vulnerable groups. Though nowadays, mechanization is gaining importance due to various reasons, it has yet not reached farm women, who are still not recognized as ‘farmers’, and the machinery is designed to suit the men’s folk. The role of women in farming operations like transplanting, harvesting, post-harvest management, and packaging, which are drudgery-prone, are on the increase. Considering these facts, the tools’ designers should give due thought when designing agricultural tools and equipment, to address farm women’s drudgery.

Introduction

Sericulture is regarded as a significant rural and cottage industry in India. It can generate more income in addition to agricultural crops. Although being viewed as a secondary occupation, sericulture may now be practiced on a large scale due to technological advancements. Since it provides a steady source of revenue, cocoon production and cultivation could be seen as a vital economic tool for the improvement of rural communities. It spreads its welfare-raising distributive impact both in the rural and urban sectors of society throughout its vertical process of production (from the rearing of silkworms to the fabrication of silk goods). Although farmers in rural regions engage in sericulture operations, most of the silk is produced in urban towns and cities through weaving. As a result, silk and sericulture are interconnected with both the agrarian and cottage industries, having a broad-based distributive effect on the creation of jobs and revenue. The employment generation pattern of the sericulture sector has been divided into two main categories by the Indian Sericulture Industry: 1) Direct employment, which includes mulberry cultivation, leaf harvesting, and silkworm rearing. 2) Indirect employment examples include reeling, twisting, weaving, printing, dyeing, finishing, and processing silk waste.

In flowering plants, each anther has four numbers of pollen sacs. Two anther lobes contain 4 pollen sacs in which pollen grains are produced. Pollen grains develop from the diploid microspore mother cells in pollen sacs of anthers. Thus, palynology alynology is the science of pollen and spore morphology and its applications. It is derived from the Greek word ‘palynein’ meaning ‘to scatter’. Morphological and comparative studies in palynology may solve intricate taxonomic problems. Pollen characters are useful in solving several complicated problems of interrelationships between various taxa and assessment of their status in the classification (Zhigila et al., 2018). Pollen grains are in the binucleate stage at the time of pollination.
Wodehouse (1935) and Erdtman (1943, 1952, 1954, 1963 & 1969) made the most remarkable contribution in the field of pollen morphology. The significance of pollen attributes in taxonomy has been realized during the last three decade Erdtman (1952); Wagenitz (1976); Stix (1960), and Nair (1974). Dr. Parmeshwaran Krishnan Kutty Nair, fondly referred to as P. K. K. Nair (Fig. 8.1) and considered as the father of Indian palynology. Palynological renaissance, which started in 1952 with the contributions of Erdtman (1952) and Faegri and Iversen (1950), grew with the scientific activities of Nair and took a concrete shape in 1964 when he conveyed a symposium at NBRI, Lucknow.

Introduction
In the modern era, technology plays an indispensable role in shaping consumer lifestyles and business operations. Understanding consumer preferences and attitudes toward new technology is crucial for organizations aiming to develop user- centric solutions, enhance customer satisfaction, and remain competitive in a rapidly evolving market. A Consumer Survey Questionnaire serves as a structured tool to gather insights directly from users about their behavior, perceptions, and expectations regarding new technology.
This chapter explores the concept, components, importance, and applications of such a survey while providing guidance on how to design and implement it effectively.
What is a Consumer Survey Questionnaire?
A Consumer Survey Questionnaire is a research instrument comprising a series of questions designed to gather data from individuals about their preferences, usage patterns, and attitudes. When focused on new technology, it seeks to uncover:
1. Preferences: The types of technologies consumers are interested in and their desired features.
2. Attitudes: How consumers perceive and adopt new technology, including their enthusiasm, concerns, and decision-making factors.
By identifying these aspects, organizations can refine product designs, marketing strategies, and customer support to align with consumer needs.

IPGRI founded in 1974 is the world’s largest international institute dedicated solely to the conservation and use of plant genetic resources. It is located at Rome in Italy. The institute is funded by the Consultative Group on International Agricultural Research (CGIR) which is an informal association of 45 public and private sector donors. CGIAR supports a network of 16 International Agricultural Research Centres. The Group was established in 1971. It is cosponsored by the Food and Agriculture Organization (FAO), the World Bank, United Nations Development Programme (UNDP), and the United Nations Environment Programme (UNEP).

Abstract

Apple orchardist’s are adopting micro irrigation system for irrigation and application of  fertilizers. The feasibility of delivery of pesticides through micro irrigation for the management of diseases and insect pests was evaluated. The minimum root rot incidence (30.55%) was recorded at low fertigation dose + aureofungin (100ppm)+ copper sulphate (100ppm) at two-week intervals as compared to control (61.10%) and it also delayed the symptom appearance by one month. At higher fertigation dose + aureofungin (100ppm) + copper sulphate (100ppm) there was increase in disease incidence as compared to the control (without fertigation). Continuous maintenance of soil moisture at field capacity (FC) enhanced the disease incidence where the overall disease incidence was 63.88 per cent as compared to 27.77 per cent in irrigation at 40 per cent FC. Fungicides applied at bi-weekly interval recorded less disease incidence. The fertigation levels did not affect powdery mildew severity; however, irrigation levels influenced it.  Plants maintained at 40 per cent FC showed less disease severity as compared to those maintained at 100 and 60 per cent FC.  Plants receiving hexaconazole dose at weekly interval depicted less disease than 2 or 4-week interval. The number of colonies and population of woolly aphid were  less on the plants treated with chlorpyriphos.