eChapters

Introduction

Humans and grass are inextricably linked to each other. The oldest unequivocal grass fossils are 25 million years old, originating in the Oligocene epoch (Thomasson, 1987). Grasses are one of the first permanent vegetation to reappear after disasters, such as volcanic activity, extended droughts, floods, fires, explosions, abandoned urban ghettos, and battlefields. In the past, landscaping was universally regarded as an extravagance for the affluent or as a decorative for mediocre and average structural design. Today, growers offer hundreds of selections for landscape designers who envision their backyard canvases swept with fulsome grasses. Countries are capitalizing on this industry at a furious pace and turfgrass research can be circuitously, the next moolah machine for enhancing lifestyle, real estate values and tourism revenues.

Abstract

Any environmental variable, can adversely affect the optimal growth conditions of the plants. The stressed environment makes the plants to alter their physiology for survival rather than reproduction. Prolonged drought, intense raining, frequent floods, cold waves high and low temperatures are the predicted abiotic stresses in the future due to climate changes. Water stress is one of the important growth limiting factor which decreases plant growth during vegetative stage. Crops grown under rain-fed conditions are the most affected by seasonal variations in rainfall. Therefore failure of monsoon, high temperature and salinity usually result in water stress. In addition, it causes serious negative impacts on crop growth and yields. A greater stress tolerance capacity could also be largely attributed to the plants by the symbiotically associating microorganisms capable of modulating stress factors. The microorganisms having close association with plants are referred as plant associated bacteria (PAB), which can be grouped into rhizospheric (in vicinity of root) and rhizoplanic (on surface of root), endophytic (inside the plant tissue)  and phyllospheric (on the leaf surface ) bacteria. Among the PAB, pink pigmented facultative methylotrophic (PPFM) bacteria belonging to the  genus Methylobacterium are well known for their intimate ubiquitous occurrence in the plant.

Abstract

Sesame (Sesamum indicum L.), one of the oldest oil seed crops of the world is mostly grown by small and marginal farmers of arid and semi-arid regions of India. The productivity of sesame in major sesame growing states ranges from74 kg ha^-1 in Rajasthan to 291 kg ha^-1 in Gujarat, and is far below from national average (368 kg ha^-1). Low yield in farmer’s fields often results because of low level of inputs and frequent soil moisture deficit. Under these circumstances, problems of low yield in resource poor farmer’s field remain a major challenge. The present study aimed at identifying the high yielding sesame cultivars and the potential breeding resources for low input agriculture in arid ecosystems.

Post independence era brought about a radical change in agricultural scenario which improved economy and living standard of Indian farmers to a great extent. Green revolution, (field crops) during early sixties followed by white revolution (milk) and thereafter yellow (oilseeds) and blue (fish) revolutions made the country not only self sufficient in most of the food commodities but also exporter in many. Several calamities including droughts, floods, and ill effects of national and international conflicts faced by the, people of the country during post independence era could not affect the economy and stability of the country much because of rich agricultural heritage. As usual, the rapid and rather un-planned development creates several problems and this was true in our conditions too. Loss ofindigenous land races, depletion of soil nutrients and water resources, creation of salinity and water logging, resurgence of pest and diseases, declining factor productivity and farm profits and increased environmental (air, water & soil) pollution are among such problems have great concern to agricultural scientists and planners in coming future. The situation further aggravated because of industry oriented government policies and globalization which supported growth of industries and trades rather than agriculture and hence the growth rate in these sectors was considerably high. This fact is more visible by the figures on relative contribution of different sectors in the national GDP during last sixty years (Table 1). At the time of independence of the country more than 75% people were depend on agriculture related occupations which came down to mere 67.4% in 2009-10. Similar is the case of total contribution of agriculture in national GDP which decreased from 57% in 1951-52 to as low as 14.6% in 2009-10. Besides government policies, major factor identified responsible for degradation of resources, stability in production and decreased factor productivity is chemical based farming and that too in imbalanced and improper methods of application practiced by the farmers for getting more andinore production and profits per unit area per unit time The solution of this lies in the increased use of organic sources of nutrients in proper ratio along with chemical fertilizers - IPNS (Integrated Plant Nutrient System). Livelihood of marginal and small land holders who represent a large section (more than 86%) of farming community and remained deprived of advancements in the, field of agriculture has been the main agenda of the Indian Government in Xlth, five year plan and to continue in Xllth plan too. To ensure livelihood improvement with focus on small and marginal farmers Integrated Farming System (IFS) has been proved to be an effective approach. Accordingly, the Project Directorate of Cropping Systems Research renamed as Project Directorate for Farming Systems Research with AICRP on Integrated Farming Systems Research and Network Project on Organic Farming mandated with farming systems perspectives. Since, integrated farming system is a holistic approach wherein all the wastes and residues are recycled within the system and nothing go waste. Output of one enterprise is used as input for the others. This way, farming becomes more economic and environmentally safe.

Abstract

Indigenous water saving technologies in arid and semi-arid environment is a local traditional practice for effective use of the limited water supply. These technologies can be used as a base for future development that can be made on these technologies through incorporating the current industry tools. The importance of studying the indigenous knowledge and practices is that it can help to develop enhanced versions of these technologies, and to understand the ability of local communities to adopt the newly developed technology. In Sudan, several indigenous water saving approaches has been used by local societies at various scales. An insight for these technologies, their strength and weaknesses are given here. On “Haffir” (water ponds), Wadi control, and water diversion methods were used for a long time of history for water collection and conservation. At farm scale, terraces, mulching, intercropping, low tillage, fallow, low-water consumption crops and fast maturing crops are common indigenous water saving technologies. Traditional water storage in trees such as Baobab and water-melon is an indigenous proactive along the history in western Sudan to store rain water for long dry season.

INTRODUCTION

Among the important ornamental bulbous plants, tuberose occupies a very prominent position. In the orient, where ‘white’ goes for virtue and purity, tuberose flower is much adored for its prettiness, elegance and fragrance. It is commercially grown as cut flower, loose flower as well as for its potential in perfume industry.

The flowers of tuberose are used for artistic garlands, floral ornamentals, bouquets and buttonholes. The long flower spikes are excellent as cut flowers for table decoration when arranged in bowls and vases. They remain fresh pretty long time and stand long distance transportation and fill a useful place in the flower market.

Plants of tuberose can be used in landscapes; in all-white gardens or with other plants. Variegated varieties with golden or yellow striped leaves are very attractive and these varieties are suitable for garden beautification. Potted plants can be put in decorative containers and used for entranceways and interiors.

Introduction

Lipids may be regarded as organic substances relatively insoluble in water, soluble in organic solvents (chloroform, ether, benzene, ethanol and other non-polar solvents, etc.), actually or potentially related to fatty acids and utilized by living cells. Lipids are a diverse group of hydrophobic or amphipathic biomolecules that play crucial roles in energy storage, cell membrane structure, and signaling. Unlike carbohydrates and proteins, lipids are not defined by a specific polymer structure but rather by their solubility in non-polar solvents. Broadly lipids are classified based on their function as ‘Storage lipids’ and ‘Structural lipids’. Some of them are co-factors, hormones, electron carriers, light-absorbing pigments and hydrophobic anchors of proteins.

Fatty Acids: Fatty acids are straight aliphatic chains with a methyl group at one end and a carboxyl group (-COOH) at the other end. They are the simplest form of lipids.

• Saturated Fatty Acids have no double bonds between carbon atoms, leading to straight chains (e.g., palmitic acid).

• Unsaturated Fatty Acids contain one or more double bonds, causing kinks in the chain (e.g., oleic acid). Fatty acids containing more than one double bond (polyunsaturated fatty acids/PUFA) are found in relatively minor amounts.

1. Introduction
The aquaculture industry has experienced unprecedented growth in recent decades, emerging as a critical sector in global food production. According to the Food and Agriculture Organization (FAO), aquaculture is the fastestgrowing food production system worldwide, with an annual growth rate of approximately 5-6%. This remarkable expansion is primarily driven by the increasing demand for seafood, fueled by factors such as population growth, urbanization, and changing dietary preferences towards healthier protein sources. As seafood consumption continues to rise, the aquaculture sector faces the challenge of producing fish that meet consumer demand while ensuring sustainable practices that protect marine ecosystems.
A key component of fish production is nutrition, which directly influences fish growth, health, and overall productivity. Among the essential nutrients required by fish, lipids play a pivotal role in providing energy, supporting metabolic functions, and delivering vital fatty acids that are crucial for growth and development. Traditionally, fishmeal and fish oil derived from wild-caught fish have served as the primary lipid sources in aquaculture feeds. These sources are rich in high-quality protein and essential omega-3 fatty acids (n-3 PUFA), which are crucial for the optimal health and growth of various fish species.

Udder Health Mastitis is a significant and costly disease of udder affecting dairy cows and buffaloes, leading to reduced milk production, increased veterinary costs, and compromised animal welfare. Effective udder hygiene practices are crucial in preventing and controlling mastitis, maximizing milk production, ensuring animal welfare, minimizing costs, and maintaining consumer trust. By focusing on udder health management through preventative measures and the best practices, dairy farmers can enhance the overall sustainability and profitability of dairy operations. There are six major steps that can lead to a better udder health. •     Farm hygiene and udder hygiene •     Hygienic milking procedure •     Dry cow management and therapy •     Appropriate therapy for mastitis cases during lactation •     Culling chronically infected cows. •     Good nutrition to increase the udder resistance to mastitis Farm hygiene and udder hygiene

Abstract

Forestry in India is very important for its wood, fuel and many non-wood products which were being used from ancient times by our forefathers for different personal and commercial use. Farmers face lots of problem in forestry because of its long gestation period, dependence on nature, bulkiness of outputs, season oriented production, perishable in nature, lack of processing centres for value addition at farm and intermediate levels, price fluctuation of forestry products, forced sale/distress sale of tree growers, low wage rate to workers in forestry activities and farmers in sufficient knowledge on market information. Establishment of institutional setup to promote forestry is urgent in the recent times.

Why Water Budget?

The reliability of water supply in desert regions is at risk due to a multitude of issues including low rainfall, low snow runoff, court-ordered water transfer restrictions and hence higher price of wholesale water. Agencies in desert regions understand the importance of improving water supply reliability, facilitating better water storage, adapting to changing climate patterns and reduced precipitation, improving Environment and Water Quality.

The Desert regions have always fought back the perpetual water scarcity with infrastructure designed around saving water and utilizing alternative water resources. Off late, not only new construction but also new policies and programs have added to their water conservation activities.

One such program attends to the fair distribution of water by tending to consumers who are price sensitive and hence use water without wasting it and by extra-charging those who do not know where to put a stop to their wasteful water use.

Food Safety and Standard Authority of India (FSSAI) has adopted the standards of Fruit Product Order (FPO).

Chutney

It is a product prepared by cooking the fruit pulp with added salt, sugar, spices, acetic acid and fruit to a suitable consistency so that it contains TSS not less than 50% and fruit part not less than 40% as per FSSAI specification. Sugar, salt, spices, acetic acid all act as partial preservatives. Preservatives may also be added in chutney for increasing its storability. Generally no artificial colour and flavor are required to be added.

Sauce

Sauce is a product similar to ketchup, prepared from pulps of tomato or other fruit/vegetable, having TSS not less than 15% and cooked to a suitable consistency with added sugar, salt, spices and vinegar. Sugar, salt, spices, acetic acid all act as partial preservatives. According to FSSAI specification fruit sauce should have minimum of 15% TSS and 1.2% acidity. Preservatives and colours may also be added for increasing of appearance and storability.

No breeding work has so far been done on kewda except selection of some promising morphotypes. Varietal improvement in kewda by breeding poses problems mainly due to dioecious nature and long life cycle of the plants, besides heterozygosity. Lack of promising strains is a major drawback. The wild growing population of kewda has a measure of variation and this has never been documented and utilized, which naturally offer a good scope for improvement of kewda by resorting to selection and subsequently propagating them vegetatively. Since a wide range of variation is available and the plants are mostly propagated by vegetative means, it is worthwhile to collect genetic stocks, access variability in morphological characters and attempt a breeding programme after selecting the desirable types for high flower production as the ultimate economate economic value of the plantations depends on the quantity of flower production to be used industrially in the distillation units.

In India after rice wheat (Triticum aestivum L.) is the second most important cultivated food crop belonging to family poaceae. Total production of wheat was 760 million tons in India during 2016-2017 (FAOSTAT, 2017) which is second largest in the world after china. In India highest producing state of wheat is Uttar Pradesh followed by Punjab, Haryana, Madhya Pradesh, Rajasthan etc. Wheat is categorize into seven commonly known wheat classes those are hard red spring, hard red winter, soft red winter, hard white, soft white, durum and mixed wheat (Khamis, 2014). 

1 Chromosome number of garden pea is 

 a) 2n=2x=14 a) 2n=2x=18

 c) 2n=2x=20 b) 2n=2x=22

2 Origin of French Bean  

 a) South America b) South Mexica

 c) Africa d) Europe

3 Pea is the  

 a) Cross-pollinated b) Often-cross pollinated

 c) Self-pollinated d) None of the above  

Introduction

A variety of glassware, plasticware, and other apparatus are used for experimental purposes in a laboratory. They need to be washed, cleaned, dried, and sometimes sterilized before they can be used in the next set of experiments. Glassware needs special care of handling during washing, drying, sterilization, etc. because even a minor mistake in handling of glassware may result in its cracking/breakage and it may become unserviceable. All of these may result in a delay in experimentation if spare piece of the glassware is not available or it may affect serviceability of the associated apparatus.

A large number of glassware such as beaker, flask, measuring cylinder, burette, test tube, etc. are regularly used in a laboratory, which requires careful handling during the different stages of experiment as well as after completion of the experiment while preparing them for another set of experimentation.

Glass being a complex silicate, its properties depends on the type of silicate anions in the structure and the cations formed. Thermal properties of glass changes by the addition of boron oxide (B2 O3 ); hence, borosilicate glass is extensively used in the laboratories. With this brief background information, let us discuss about the necessity, procedures, and precautions during washing, cleaning, drying and sterilization of laboratory-wares. Figure 3.1 shows various advantages of using borosilicate glass in a laboratory.

Good laboratory practices require clean glassware, because an experiment may give erroneous result if dirty glassware is used at any step of the experiment. Hence, the glassware must be physically and chemically clean; and in many cases, it must be microbiologically clean or sterile. The commonly used glassware in a laboratory include test tube, measuring cylinder, pipettes, beakers, flasks, microscopic slides, etc.

The native and applied organic matter play an important role in terms of nutrient adsorption , nutrient mobility and microbial habitat on soil. The dominant ions present in soil under a particular agro-ecological situation may or may not be available to the growing plants due to the presence of organic matter. The binding energy and the stability of the organo-metal complexation would play an important role in availability of nutrients to the plants. The organo-metal complexation reaction depends on the nature of the ionic species (ionic/non ionic) present in soil. The organic fractions (Humic acid/Fulvic acid) react with metal ions present in soil to form complexes which may be stable or unstable depending upon the molecular arrangement and degree of coiling of humic/fulvic substances. The surface charge density on clay and soil pH also play an important role to determine the order of stability of different nutrients (macro/micro) in soil.

1. Introduction
Feed formulation for carnivorous fish species is a pivotal aspect of aquaculture that significantly impacts growth performance, health, and the sustainability of production systems. As the global demand for seafood continues to rise, driven by population growth and changing dietary preferences, optimizing feed formulations becomes increasingly essential for aquaculture operators. Efficient feed formulations are crucial not only for enhancing fish growth rates and feed conversion efficiency but also for ensuring the economic viability of fish farming operations.
Carnivorous fish species, such as salmon, trout, tilapia, and catfish, have specific nutritional requirements that must be met to achieve optimal performance. These requirements typically include high-quality protein sources, essential fatty acids, vitamins, and minerals. The formulation of diets that adequately supply these nutrients while minimizing costs is a complex challenge that aquaculture practitioners face. Traditional feed ingredients, including fishmeal and fish oil, are often expensive and subject to supply fluctuations, prompting a need for innovative alternatives that can provide similar nutritional profiles at a lower cost.
This chapter delves into the intricacies of feed formulation for carnivorous fish species. It begins by outlining the nutritional requirements specific to these fish, emphasizing the importance of protein and fatty acid sources. The chapter then discusses various feed ingredients, both traditional and alternative, that can be used to formulate cost-effective diets without compromising fish health and performance. Additionally, it addresses the challenges associated with formulating diets for carnivorous species, including ingredient variability, palatability, and the potential for anti-nutritional factors.

Gain threshold: The beginning point of economic damage, expressed in amount of harvestable produce; when cost of suppressing insect injury equals money to be gained from avoiding the damage.

Galea: The lateral lobe of the maxillary stipes; tonguelike, distal lobe attached to the stipes of the maxilla; an apical lobe of the maxilla of an insect; the outer two-jointed lobe of the “pincers” present on the maxilla of insect mouthparts; in adult Lepidoptera the two are joined and enlarged to form the proboscis. (Fig. 63)

Gall: Swellings, deformities, or growths of plant tissue that result from the activities various types of pests, including bacteria, nematodes, mites and insects; an abnormal growth of plant tissues, caused by the stimulus of an animal or another plant (Fig. 128).

Gallicolous: Living in a plant gall either as the producer or inquiline.

X-ray scattering techniquesarea family of non-destructive analytical techniques which reveal information about the crystallographic structure, chemical composition, and physical properties of materials and thin films. These techniques are based on observing the scattered intensity of an X-ray beam hitting a sample as a function of incident and scattered angle, polarization, and wavelength or energy.