eChapters

Introduction

There is an ongoing debate on global warming worldwide as it is seriously impacting climate change. The global temperature has been increased by 0.74±0.18°C during the last century and the climate model projections summarized in the Intergovernmental Panel on Climate Change (IPCC) report indicate that the global surface temperature will probably rise a further 1.1 to 6.4°C during the twenty-first century (IPCC, 2007). High ambient temperature is one of the most important stressors to poultry, which has a direct relationship on profitability of chicken meat and egg production. A seasonal problem in many parts of the world, high environmental temperature (35-43^oC in tropical countries) causes economic losses through reducing feed intake while decreasing nutrient utilization, live weight gain, egg production, egg quality and feed efficiency in poultry (Corzo et al., 2003; Panda et al., 2007a; 2008). The ideal temperature for broilers is 10-22^oC for optimum body weight and 15-27^oC for feed efficiency (NRC, 1994). Layers will produce egg constantly in the temperature range of 10-30^oC. Above 30^oC, performance in terms of growth and egg production declines.

ABSTRACT

There is a tremendous growth in the open educational resources in the recent past and large number of universities and academic organisations are making their resources freely available over the internet which has become a significant source of open educational content. Open education movement are built on the belief that anyone can use, access, reuse and redistribute these educational resources without any constraints. These Open education movements are helping educational community worldwide in making education more accessible and in making it more effective. In this chapter effort has been made to provide an overview of the history and emergence of open educational resources’ movement. This chapter also explains the various characteristics and sources of open educational resources. This chapter will help the libraries and librarians to know about open educational resources initiatives and to incorporate them in their libraries for effective resource delivery and disseminations.

Keywords: ICT, OER, Open educational resources, Digital resources, Digital repositories.

Introduction

Soils are formed by weathering of rocks and minerals and all soils contain some amount of soluble salts. Many of these act as a source of essential nutrients for the healthy growth of plants. However, when quantity and quality of salts in the soil near rhizosphere exceeds a particular value, growth, yield and/or quality of most crops is adversely affected. Such a soil is called salt-affected. The degree of adverse effects depends upon the type and quantity of salts, crop and its variety, stage of growth, cultural practices and environmental factors viz. temperature, relative humidity, and rainfall etc. Development of salinity and waterlogging is a serious problem in arid and semi-arid regions of the world and threatening the sustainability of irrigated agriculture.

Soil degradation resulting from salinity and sodicity is a major environmental threat to soil fertility and agricultural productivity in arid and semiarid regions of the world. Saline–sodic soils are degraded due to the simultaneous effect of salinity and sodicity. This causes loss of soil physical structure by clay swelling, and dispersion because of high Na+ concentrations in the soil solution or at the exchange phase. Apart from these physicochemical effects, this leads to biological properties, such as microbial respiration and biomass, becoming worse. On the other hand, salinity affects plant growth by creating osmotic imbalances and specific ion toxicities, which pose limitations to morphological, histological, chemical, biochemical, and metabolic processes. In turn, these reduce stomatal opening and photosynthetic rate, leading to decreased plant growth, crop yield, and quality.

A linear programming problem aims to maximize or minimize a linear function subject to the linear constraints. But in many cases, the objective function may not be linear or all/some of the constraints may not be linear or both the objective and the constraints may not be linear. Such an optimization problem is called a nonlinear programming problem (NLPP). In this chapter, we discuss about NLPP’s. Nonlinear programming is the process of solving an optimization problemdefined by a system of equalities and inequalities, collectively termed constraints, over a set of unknown real variables, along with an objective function to be maximized or minimized, where some of the constraints or the objective function are nonlinear. It is the sub-field of mathematical optimization that deals with problems that are not linear. A typical non-convex problem is that of optimizing transportation costs by selection from a set of transportation methods, one or more of which exhibit economies of scale, with various connectivity and capacity constraints. An example would be petroleum product transport given a selection or combination of pipeline, rail tanker, road tanker, river barge. Owing to economic batch size the cost functions may have discontinuities in addition to smooth changes. In experimental science, some simple data analysis (such as fitting a spectrum with a sum of peaks of known location and shape but unknown magnitude) can be done with linear methods, but in general these problems, also, are nonlinear.

In Doppler imaging, the reflections are from circulatory vessels, while in 2D ultrasonic image the reflection is from a tissue(s) or organ(s) In 2D ultrasound strength of reflection in B-mode depends upon density of the organ.On other hand the reflection in Doppler imaging depends upon direction of the circulation. If circulaltion is coming towards transducer, the signal will be strong, while it looses its strength while flowing away from the transducer. As shown in the diagram, the position of transducer on curved surface decides the strength or amplitude of signal. If it is positioned on curve end from where circulation is coming, the signal will be of higher amplitude, but when position is changed to other end of curved surface, where circulation is going down the amplitude of signal will decrease accordingly and is shown in reverse direction.

Principle of Doppler

Movement of blood in vessels is detected, which is depicted by color in some ultrasound machines. The flow coming towards transducer is shown above baseline, while flow going down i.e. away from transducer is shown below baseline. If position of transducer is changed from where the arterial flow is going away from transducer then, the arterial flow will be shown below baseline and venous flow that is coming towards transducer will be shown above baseline. Some machine shows red and blue color of the flow. The red color shows flow coming towards and blue color shows flow going away from transcer. A beginner ultrasonographer may think that the red color is from artery and blue is from vein. This is not true, this shows direction of flow. Since ultrasonic image of flow in Doppler is formed from series of pulses returning from vessels, the magnitude of pulse changes with variation in flow. A stationary flow will not show any height of magnitude.

Abstract

Indigenous chickens play vital role in sustainable rural development by providing livelihood and nutritional security to the rural and tribal people. However, indigenous chickens in the country increasingly face the threat of their replacement or erosion in their genetic diversity due to introduction of exotic or improved chickens to enhance productivity of backyard poultry production. Therefore, it becomes imperative to improve the growth and productivity of indigenous chickens in order to make the rearing of indigenous chickens economically attractive proposition. Aseel is one of the important indigenous breeds of chicken that is being conserved and improved for growth and egg production at Directorate of Poultry Research (DPR), Hyderabad. The averageegg production of improved Aseel chickens recorded in a laying cycle of 72 weeks of age was 150.3±5.63with an average egg weight of 48.66 ±0.34g. The average body weights of male and female birds recorded at 72 weeks of age were 3156 ± 27.4 and 2133±36.1 g, respectively while corresponding shank lengths were 135.23±0.7 and 104.9±0.4 mm. Another indigenous chicken germplasm, Ghagus-ecotype was collected from border area of Karnataka and Andhra Pradesh at Kolar district and is being characterized and conserved at DPR. The comparative growth performance of these indigenous chickens was also studied under similar management conditions. It was observed that the growth and egg production of improved Aseel breed was significantly higher than the Ghagus-ecotype chickens. The improved Aseel breed with its better growth and production performance appears to be a promising indigenous chicken for sustainable rural poultry production.

Introduction

The term nitrogen use efficiency, (NUE) is widely used in research to cover problems in use of N in crop production systems. It describes N input/output ratio at different scales starting from farm levels to regional levels. An analysis of of NUE is helpful to analyze possible options for improving NUE in different crops and cropping systems. NUE at crop scale may be defined as the ratio between the yield and the N uptake by the crop. This ratio is sometimes called as the physiological NUE or utilization efficiency. High NUE can be achieved by high harvest index and a high productivity of dry matter per unit N uptake. The second component of NUE is the ratio of plant N uptake to the potentially available N. This ratio is called uptake efficiency or available N use efficiency. Enhancing the uptake efficiency of the crop is possible through enhancing the physiological uptake efficiency of the roots, enhancing root length density and matching the N supply and demand of a particular crop.

Livestock sector plays a vital role in the welfare of India’s rural population by acting as an important source of income and employment in the rural sector (Dastagiri, 2004). India possesses the largest livestock population in the world and ranks first with (520.6 million), and accounts for the largest number of cattle (world share 16.1%), buffaloes (57.9%), second largest number of goats (16.7%) and third highest number of sheep (5.7%) in the world (FAOSTAT) and sustaining all these in less than 5% of world’s and one-third of Asia’s agricultural land area (MOA, 2003).

ABSTRACT

Mineral composition and their distribution on planetary surfaces provides important clues to the evolutionary processes that the planetary bodies have undergone since their formation. For distant and inaccessible planets, remote sensing, either from Earth-based telescopes or from an orbiter around the planetary body, using reflectance spectroscopy over a wide range of the electromagnetic spectrum (UV-Visible-IR), can provide surface distribution of minerals. With advances in technology, a high-resolution hyperspectral imager onboard an orbiter has developed into a powerful tool for compositional mapping of planetary surfaces. Interpretation of the signals from these distant and relatively unknown destinations is a challenging task due to scarcity of available ground truth. Here, we describe the technique with its applicability to airless bodies, such as Moon, in the context of the Indian Moon mission, Chandrayaan-1, and, the intricacies involved in the data analyses.

Keywords : Reflectance spectroscopy, hyperspectral data, remote sensing, planets, moon

1. INTRODUCTION

The primary goal of planetary exploration is to understand the mechanism by which planetary objects (planets, dwarf planets, satellites and small solar system bodies) have evolved with time. The information gathered from the study of individual bodies is integrated to comprehend the development of our solar system. The present understanding envisages our solar system to have formed from the solar nebula, produced as a consequence of the collapse of a molecular cloud. While the central mass gravitated and formed the sun, the gas and dust surrounding it condensed to form grains and formed the proto-planetary disk. These grains, through a series of processes, finally aggregated to form of the various planetary bodies. Existing Astronomical, chemical and mineralogical evidences from studies of lunar samples, meteorites and, remote sensing observations suggest that the planetary bodies are heterogeneous and possess extreme compositional and morphological diversity. The internal energy of a planetary body, a function of its size, is responsible for the differences in the degree of differentiation a body has undergone leading to the variations in their surface composition. Large planets like the Earth and Venus are still evolving whereas the small asteroids have barely evolved after their formation and are considered primitive. The wide variety of planetary bodies in our solar system is therefore reminiscent of the various stages of evolution that our solar system went through. The degree of melting and cycling through episodes of differentiation determine the mineral inventory on a planetary body. Therefore, distribution and composition of various minerals can be used to understand various stages of chemical evolution of a planetary body. Mineral mapping of planetary surfaces is thus useful in understanding the petrogenetic history.

Insects, belonging to the phyllum-arthropoda, have an open circulatory system. An open circulatory system is that in which blood bathes the organs rather internal organs directly in the haemocoel, the coelom of the insects, which actually is not a true coelom. Almost entire haemocoel of insects is formed from the epineural sinus. The haemocoel is divided into the perineural sinus and perivisceral sinus by the dorsal and ventral diaphragm respectively. The characteristic of insects is the presence of dorsal vessel, which comprises of anterior aorta and a posterior heart and is the only conducting tube present in insects. The blood of insects mostly does not perform gaseous exchange, therefore it does not contain haemoglobin, and blood in insects is called the haemolymph, which is red-coloured. So in order to study the circulatory system of insects, the major focus must be on the dorsal vessel, which has been described as follows, along with its accessory structures.

Any crop improvement programme primarily depends on the amount of genetic variability available and the extent to which the economic traits are heritable. A wide survey of genetic variability and a thorough understanding of the genetic makeup of the crop with the biometrial tools is very much indispensable for initiating an effective breeding programme.

Effectiveness in breeding programme depends upon three main factors viz., (i) the extent of genetic variation available, (ii) heritabiity of the variation and (iii) intensity of the selection pressure that can be applied. As most of the characters of economic importance and related characters which influence the performance of the economic character in a given set of environment are highly influenced by the environmental conditions, the heritable (genotypic) variation usually masked by non-heritable (environmental) variation and thereby creates difficulty in exercising the selection. Hence, it becomes necessary to partition the overall variability into heritable and non-heritable components to enable the breeders to plan for proper breeding programme.

The estimates of mean, variance and standard error are worked out by adopting the standard methods of Panse and Sukhatme (1961). Usually, randomized block design is the choice of the statistical design. Various genetic parameters are worked out from the mean squares. Assessment of genetic variation is usually made through the computation of genotypic variance and genotypic coefficient of variation. The proportion of the total genetic variance expressed as percentage of total phenotypic variance has been used as a measure of genetic variability of heritability in broad sense.

Gerbera (Gerbera jamesonii Bolus), commonly known as Transvaal Daisy, Barberton Daisy or African Daisy, belongs to the family Asteraceae is one of the most important cut flowers in domestic as well as global market. It ranks sixth among the top ten cut flowers. Gerbera can successfully be grown in the plains as well as in the hills. In India, its cultivation is confined mostly to Kalimpong, Bangalore and Pune. The flowers are known for long vase life (Chauhan, 2005) and good rehydration capacity suitable for long distant transportation. It is a diploid species with somatic chromosome number 50 (n=25).

Importance and Uses

Gerbera is very fashionable and widely used as a decorative garden flower and cut flower (Kanwar and Kumar, 2008). It is ideal for garden decoration as a bedding plant, pot plant and suitable for growing in rock gardens. It is also used in interior decoration in vases, flower arrangements and in bouquets.

Gerbera viridifolia is referred as ‘the herb of milk’ in the eastern Cape and is probably used to stimulate milk production in cattle (Dold and Cocks, 2002).

Introduction

Crop discrimination is the process of using remote-sensing technologies to identify and characterize different types of crops based on their electromagnetic behavior at different wavelengths. Each crop has a unique spectral signature that reflects its response to the incident radiation. However, the spectral signature can also vary depending on the season, the angle of the sensor, crop’s features, illumination intensity, weather phenomenon, and topography among other external factors (Parida et al., 2023).

The production of fruit and vegetables has recently increased significantly and even surpassed the total grain production in the country due to increased awareness of consumer and positive government initiatives (Schieber et al., 2001; Sagar et al., 2018; Malenica and Bhat, 2020). But due to limited production and area, the importance of excess production during a particular season and waste management arises at highest priority level. Moreover, fruits and vegetables waste are a serious problem for environment as most of themare being disposed of as landfills or directly disposed off to water bodies such as rivers (Wadhwa and Bakshi, 2013). Fruits and vegetables are perishable in nature and rich source of nutrients and vitamins, which results in microbiological contamination (Coman et al., 2019; Bas-Bellver et al., 2020). Foods wastes are usually organic residues generated by the processing of raw agricultural materials into food and are made up of liquid (wastewater) and solids (Bas-Bellver et al., 2020). The wastewater results from the cleaning processes or in the form of excessive or polluted process water. Its dry material content is typically less than 5% by mass. It possibly also contains organic or inorganic cleaning agents or disinfectants. Solid food wastes with an organic origin have remarkably high water content (mostly about 80% by mass). They are usually characterized by a constant quality and purity due to the forgone processes. The fact that these substances are removed from the production process as undesirable ingredients makes them, wastes.

The future of biodynamic farming is intricately linked to emerging trends and technologies that are transforming the landscape of agriculture. As the world grapples with environmental challenges, the demand for sustainable farming practices is intensifying. Biodynamic farming, rooted in ecological principles and holistic management, is gaining prominence as a viable solution for sustainable food production. This article explores the future of biodynamic farming, focusing on the emerging trends and technologies that are poised to shape its development. From advances in digital agriculture and precision farming to the integration of renewable energy and sustainable practices, the article examines how these innovations can enhance the effectiveness and scalability of biodynamic farming. Additionally, it highlights the role of research, education, and policy support in driving the adoption of biodynamic practices worldwide. By embracing these trends and technologies, biodynamic farming can contribute to a more resilient and sustainable global food system.

Genome editing has emerged as a powerful tool for accelerating crop improvement in horticultural crops by enabling precise modifications in their genetic architecture. Considering the development and advantages of genomeediting technologies in improving diverse characteristics of horticultural crops, substantial increase has been reported in recent years including ZFN, TALEN, and especially CRISPR/Cas systems. The CRISPR/Cas technology has proved its potential in altering many genes of interest in horticultural plants including fruits, vegetables, and ornamental plants for improving agronomically important traits and attributes such as growth rate, seed size, flowering time, flower color, storage time, resistance to biotic stresses, tolerance to abiotic stresses, herbicide tolerance, metabolism, fruit color, fruit ripening etc. This technology opens new avenues for more favorable and precise manipulation of plant genomes to improve crop performance.
Genome editing has emerged as a powerful biotechnological tool with transformative potential for horticultural crops. It involves the precise modification of plant DNA to enhance desired traits, increase crop yield, and confer resistance to pests, diseases, and environmental stresses. Molecular tools like CRISPR-Cas9, TALENs, and ZFNs act as molecular scissors, allowing for the targeted alteration of specific DNA sequences with unprecedented accuracy. This technology allows scientists to introduce or enhance beneficial traits in crops, including disease resistance, improved nutrition, and drought tolerance. Horticulture is a critical component of global food production and human well-being as it involves cultivation and management of plants for food, aesthetics, and medicinal purposes. Horticultural crops comprising fruits, vegetables, ornamental plants, and medicinal herbs, not only contribute to nutritional needs of populations worldwide but also enhance the visual appeal of our surroundings. However, productivity and quality of horticultural crops face significant constraints due to challenges such as biotic and abiotic stresses, limited genetic variation, and increasing demands for improved traits. Plant breeders have employed various techniques, such as hybridization, selection, and genetic manipulation, to enhance horticultural crops. These approaches have contributed to improved yield, disease resistance, and other desirable traits.

Abstract
Ocean acidification, caused by rising atmospheric CO2, is a major environmental issue that threatens marine ecosystems and human livelihoods. This process decreases the pH of seawater, increasing its acidity, through a series of chemical reactions that result in the formation of carbonic acid. These changes negatively impact marine food webs, especially calcifying organisms like corals, molluscs, and plankton, which depend on carbonate ions to build their shells and skeletons. The cascading impacts of acidification jeopardize the biodiversity, productivity, and resilience of marine ecosystems, including fisheries that millions depend on for food and income. Factors such as ocean warming, deforestation, and natural CO2 emissions exacerbate acidification. Mitigation efforts, including reducing CO2 emissions, restoring habitats, and promoting sustainable fishery management, are essential for minimizing future impacts. Addressing and mitigating ocean acidification are critical for conserving marine life, sustaining fisheries, and preserving ecological balance in the face of global climate change.
Keywords: Ocean acidification, Marine food webs, Impact, Calcifying organisms

Introduction
Any species that has been accidentally or purposely brought outside of its current range by humans is considered an introduced (or exotic) species (Kottelat and Whitten, 1996). According to the International Union for Conservation of Nature and Natural Resources (IUCN), an alien species is considered invasive when it establishes itself in natural or semi-natural ecosystems or habitat, causes change, and endangers the biological diversity of the host species. These invasives encompass all classes of living things and are widely dispersed throughout the world's ecosystems (Raghubanshi et al., 2005). Numerous reasons led to the introduction of exotic fish species in various parts of the world: (a) increasing the potential for local fisheries and diversifying species in aquatic systems; (b) promoting sport fishing; (c) maintaining aquariums; and (d) managing undesired organisms like mosquitoes, etc. (Biju Kumar, 2000). Furthermore, floods and a variety of other factors may allow exotic fish imported into one nation to spread to its neighbors. According to Welcome (1988), 168 fish species from 37 families have been introduced worldwide outside of their native area. At least 67 of these species have established themselves in various bodies of water, with 27 of them turning out to be serious pests. Approximately 20 percent of freshwater fish species worldwide are either extinct or in danger of going extinct (Moyle and Leidy, 1992). Over time, the introduction of new species might prove to be a very harmful issue. Nyman (1991) stated that the introduction of alien species may cause the aquatic environment to undergo permanent alterations and perhaps cause the extinction of some species.
As a result, the careless introduction and movement of aquatic species, especially fish, caused much worry across the world since it led to several issues, including the extinction of native species. Fish native to the area compete with exotics for food and habitat. They might kill local fish, bring in new illnesses and parasites, create hybrids, pollute the genetic pool, and lower the standard of the aquatic ecosystems. The loss of priceless biodiversity will result from all of these (Nyman, 1991). Potential hazards include those that might affect not just biodiversity quality or quantity but also the socioeconomic facets of the human society that depend on aquatic environments for survival (Philipp et al., 1995). Introductions are a legitimate way to increase aquaculture and fisheries productivity and economic advantage. Indeed, the primary driving force behind the migration of fish and shellfish across continents and even geographic regions has been aquaculture. To address the growing need for food and nutritional security, exotic species have been used to diversify fisheries and aquaculture. Species introductions and transfers from one hydrographic

Certified seed must meet certain seed standards in order to ensure an adequate level of seed purity along with the reasonable level of seed germination so that the farmer gets a good stand of the crop conforming to the varietal description. The components of the seed standard are as follows :
     The minimum percentage of pure seed 
     The maximum permissible limit for inert matter 
     Other crops seeds  
     Weed seeds 
     The maximum permissible limit for objectionable weeds 
     The maximum permissible limits of seeds of other distinguishable varieties (ODV) 
     Maximum permissible limits of seeds infected by seed bone diseases 
These standards are ensured in the seed crop by strictly adhering to field standards and careful harvesting, threshing, seed drying and then brining the same to the seed processing /seed conditioning plants. The Indian minimum seed standards for different crops are given in Tables 24.1-24.3 (Agarwal, 1995).

Introduction

The soil is the largest terrestrial pool of organic carbon, about 1150 Pg (1Pg = 10¹⁵ g) compared with about 700 Pg in the atmosphere and 600 Pg in land biota (Lal and Kimble,1997). Organic carbon level of soils reaches a fixed equilibrium that is determined by a number of interacting factors such as precipitation, temperature, soil type, tillage, cropping systems, fertilizers, the type and quantity of crop residues returned to soil, and the method of residues management. In the temperate climate, it may take about 50 years for the organic carbon of soils to reach a new equilibrium level following a change in management. However, this period is much shorter in a semiarid and arid climate and also in tropical climate like India.