eChapters

Introduction

The split-plot design is specifically suited for a two-factor experiment that has more treatments than can be accommodated by a RCBD. In a split-plot design,one of the factors is assigned to the main plot. The assigned factor is called the main-plot factor. The main plot is divied into subplots to which the second factor ,called the subplot factor, is assigned. Thus, each mainplot becomes a block for the subplot treatments (i.e the levels of the subplot factor). The split-plot design is profitably employed under the following situations.

1. An experimenter may have already possessed some knowledge about the main effect of a certain factor so that his interest lies in estimating the interaction effect of this factor with some other more important factor in whose main effect also he is equally interested. In either case he wants to estimate the latter two effects with greater precision for which he is prepared to sacrifice the precision in estimating the first mainfactor.
2. The second common type of situation when the split-plot design is automatically suggestive is the difficulties in the execution of other design. For instance, if ploughing is one of the factors of interest,then one cannot have different depths of ploughing in different plots scattered randomly apart. Similarly, if different levels of irrigation are chosen,then random distribution of these levels in an ordinary experiment may involve difficulties in the practical execution of such plans. This difficulty may,however, be offset partly by having strips of plots (in one unit of block,say), all treated alike ;receiving the same level of irrigation with different depths of ploughing; or different levels of irrigation with same depth of ploughing. Different levels of irrigation or different depths of ploughing can,however,be randomly distributed over such strips.
3. The third situation in which the experimenter may adopt a split-plot design is this. A particular factor (factors) under investigation exhibits large treatment differences which can be easily detected even in bigger plots,while a second factor (factors) requires comparatively smaller plots to detect smaller treatment differences with higher precision. Then the first factor will be tested in whole plots and the second factor whose treatment differences are small will be tested in small plots or subplots.

Learning outcomes

• You should know how to make an audio or video script.
• Describe the differences between the different kinds of programmes.
• Examine the different script development stages. Before we start, please complete the following activity.

Reflect on the programmes you watch on TV or any other programme using Over the top (OTT) platforms like amazon, prime video, Netflix etc. How many of it you classify as

1. Entertainment
2. Educational
3. Informational

Introduction

• India is the second largest producer of fruits in the world after China

• India is rich in fruit diversity starting from tropical, subtropical to temperate region.

• Some of the fruits like Guava, pomegranate, lemon, mandarin etc., if left without any treatment, give several light harvests of the variable quantities and qualities from the various flowering flushes throughout the year.

• Some of the fruit crops bloom throughout the year without any resting period and produces two or three crops (bahar) in a year but yield and quality is not so good in all crop harvest. So, it is very essential to understand the flowering and fruiting behavior of crops and which bahar will give good crop with considering all the factors associated with a particular bahar.

7.1 What is crop regulation?

• Crop regulation means to force the tree for its rest and to produce blossom and fruits during any one of two or three flushes”

• Crops in which flowering is continuous throughout the year; economic yield cannot be achieved in any of the season.

• Therefore, by analyzing market demand flowering can be forced in particular one season, which gives the economic yield.

• Through various techniques like cultural practices and chemical treatments, trees are thrown to rest prior to flowering and then practices are done to trigger flowering.

• Thus, crop regulation is a method to regulate flowering by altering natural tendency of the tree by artificial means.

Introduction

One of the main challenges in sustainable farming is determining the patentability of living organisms, including genetically modified crops and biotech innovations. Balancing the rights of inventors and the public’s access to agricultural resources can be so complex the Seed saving and farmer’s rights Seed saving is a traditional practice where farmers save and reuse seeds from their harvest. However, some intellectual property rights (IPR) regimes restrict farmers’ ability to save and exchange seeds, potentially limiting their autonomy and leading to dependence on commercial seed suppliers. Biopiracy and traditional knowledge Protecting traditional knowledge and preventing biopiracy is a significant concern in sustainable farming. Nearby agriculturists and inborn individuals habitually have imperative conventional information approximately plant sorts and rural procedures that’s esteemed, and they are decently compensated for their endeavors. Maintainable advancement became a major worldwide agenda thing within the afterward decades of the 20th century! According to the Brundtland report from 1987: “Our Common Future,” provided the most recognized concept of sustainable development, meeting future demands without sacrificing existing practices to be adopted for future aspects. (Ahmed Abdel-Latif, 2021). While a few Intellectual property rights have been pointed out such as the plant breeder’s rights trademark, security of plant assortments and ranchers’ rights (PPV and FR), topographical signs, and exchange insider facts are exceptionally significant to horticulture. In expansion, format plans for chips particularly planned for farming; logical papers, and tv programs covering thoughts related to horticulture and partnered segments must be considered. (Datta, 2016).

Overview of the Indian Dairy Sector

India’s dairy sector occupies a unique global and domestic position due to its scale and socio-economic impact. As the world’s largest producer of milk with 230.6 million tonnes of production in 2022-23 (BAHS, 2023), India contributes approximately 23% of global milk production, surpassing countries like the United States and New Zealand (FAO, 2020). This dominance is largely attributed to Operation Flood, the revolutionary initiative launched by National Dairy Development Board (NDDB) in the 1970s, which transformed India from a milk-deficient country to the world’s largest milk producer (World Bank, 1998). Operation flood is known for its contribution in increasing milk production, supplement rural income and make available reasonable prices to the consumers. This initiative laid the foundation for the cooperative model of dairy production, epitomized by the success of organizations like Amul, which became a global model for dairy development (Candler & Kumar, 1998).

The gaseous envelope surrounding the earth is called atmosphere. Thus, atmosphere can be defined as the dynamic layer surrounding the earth above its surface containing various gases, moisture, aerosols, etc. The atmosphere is retained by earth’s gravity.

The atmosphere protects life on earth by absorbing ultraviolet solar radiation, warming the earth’s surface through heat retention and reducing temperature extremes between day and night. The common name given to the atmospheric gases used in breathing and photosynthesis is air. The atmosphere has a mass of about 5.15 × 10¹⁸ kg, three quarters of which is within about 11 km from the surface. The atmosphere becomes thinner and thinner with increasing altitude, with no definite boundary between the atmosphere and outer space. The imaginary ‘Karman line’ lies at an altitude of 100 km above the mean sea level, and commonly represents the boundary between the earth’s atmosphere and outer space. The study of earth’s atmosphere and its processes is called atmospheric science or ‘aerology’. The atmosphere serves the life-system on the earth by the following activities.

Hydraulic turbines is a device which transforms the hydraulic energy or potential energy existing with the working medium to mechanical energy. The working medium is normally water which run the hydraulic turbine. The hydraulic energy is available with water by virtue of its height or altitude. The water which flow through the mountains is stored by constructing a dam or reservoir.

Our Soils – Our Waters & COP22

In the last several decades many international forums and institutions have discussed and agreed that food and water security are the most important issues for the future. The damage to the ecology directly affects the food, land, water, health and the livelihood. Agricultural progress serves as the best way to fight poverty, hunger and livelihood problems.

Though in the last few decades, billions of pages about hunger, food and water security have been written, thousands of conferences have been organized, the urgency of action plans and creating holistic models is the most important need. For this, we must require bold reforms and action oriented programs which can reach the smallest farmers and give an optimistic signal rather than a despondent picture. Developmental models that are holistic and close to nature, sustainable and based on inclusiveness considering ‘unto the last’ women and man are the need of the day.

RURAL DEVELOPMENT

Meaning

The word “Rural” comes from the word “Rurale” which means close to nature and environment, and “Development” means growth or maturation.

Rural development is utilization, protection and enhancement of the natural, physical and human resources to make long-term improvements in rural living conditions. It involves provision of jobs and income opportunities while maintaining and protecting the environment of rural areas.

General Definition

1)     It is based on an operational approach with practicalities with the people covering maximum end users for maximum economic return.

2) Definition by Axinn

R.D. is a process of change among the rural people through change in environment, technology institutions and attitude to eliminate the poverty and improve the way of life.

3) Definition by Miller

R.D. is based on the following components

a)     Development of human resource - It includes the development of rural people by providing education to the rural children and employment to rural youth, socio-economic condition of village can be improved.

b)     Expansion of physical resources - Construction of infrastructures like roads, schools, colleges, post office, bank etc will improve the rural condition.

c)     Extension of communit’s control over the resources.

SYSTEMS BIOLOGY

The ultimate goal of any biological experiment is to understand biological systems in sufficient detail to enable accurate, quantitative predictions about the behavior of the systems, including predictions of the effects of modifications of the systems. To precisely simulate the behavior of the system using a computer model is one of the ways to achieve the above goal and in this venture we are nowhere close to the goal. Systems biology will help us to get closer to this goal and it is expected that biologists to adopt to take advantage of the power of systems biology approach. Systems biology is an emergent field that aims at system-level understanding of biological systems. Systems Biology is the study of the interactions between the components of biological systems, and how these interactions give rise to the function and behavior of that system. For example, theenzymes and metabolites in a metabolic pathway.With the progress of genome sequence projects and range of other molecular biology projects that accumulate in-depth knowledge of molecular nature of biological system, we are now at the stage to seriously look into possibility of system-level understanding of solidly grounded on molecular-level understanding.Unlike molecular biology which focus on molecules, such as sequence of nucleic acids and proteins, systems biology focus on systems that are composed of molecular components. Although systems are composed of matters, the essence of system lies in dynamics and it cannot be described merely by enumerating components of the system.

Abstract

The J&K state, like other Himalayan states, is endowed with varied climates and agro-climatic situations and has the potential for improvement in a horticulture sector. Focus on selective issues based on the niches of the areas , strengthening the on-going programs of different developmental departments, site specific issues, backed up with latest technologies need to be identified which can have tangible and immediate impact on the farm economy. The horticulture section is doing well in Jammu and Kashmir state when compared with others food crops, since it fetches good price because of its nature of seasonality. The estimation of the potential profits can be drawn by the fact that a farmer producing wheat of 1 kg gets 10 times higher prices for the same produce in horticulture section. Considering this high potential, the concept of doubling farmer’s income can work magically with horticultural crops. There is a need of shift from traditional crops and cropping patterns. Technological interventions are required to strengthen the conditions of cold storage, adoption of farming system approach, instead of cropping system approach, incorporating element of diversification, promotion of cultivation of high value crops, efficient post-harvest management, value addition etc. popularization of technologies and schemes to achieve targeted growth in horticulture. Strengthening water resources through rainwater harvesting, soil moisture conservation and efficient utilization of stored/conserved rain water (micro-irrigation, fertigation). Promotion of niche commodities based on agro-ecological situations will benefit promotional efforts in horticulture development with increased benefit cost ratio.

Abstract

84 per cent of the Indian rural women livelihood depends on agriculture. It is estimated that 52-75 per cent of the Indian women engaged in agriculture are illiterate. Prevalence of anaemia among pregnant women ranges between 50%-90%. From these facts it infers that ghost of food and nutritional security haunts the rural women health and prosperity. Female participation in the economic activities also determines the sex ratio because the work determines the worth in the society. It has been observed that in those families where women participate in economic activities, this problem is not severe as compared to those families which do not participate in economic activities. Diverse areas of entrepreneurship exists in rural India for women empowerment. This potential can be realized through policy and infrastructure support from the government and by strengthening proactive synergies among various farm and non-farm sectors activities. Although we are proud of the Indian women in the global arena yet we have peer into the atrocities against them in the name of female foeticide, gender inequality, sexual harassment, dowry system and many more evils with promotion of involvement in socio-economic enterprises, if rural transformation is to be achieved.

1. Choose the correct option for the characteristic of growth.

 a) It is an irreversible permanent increase in size of an organ or its parts or

even of an individual cell

 b)  It is accompanied by metabolic processes

 c) It occurs at the expense of energy

 d)  All of the above

2. Plant growth is unique because

 a) Plants bear the capacity for unlimited growth

 b)  Plants bear the capacity for limited growth

 c) Plants have diffused growth that differs from animals

 d)  None of the above  

Introduction to Antibiotic Discovery

Antibiotics are the drugs that are used to treat illnesses caused by bacteria in humans and animals. These act by killing or inhibiting the growth and multiplication of bacteria. Antibiotics were considered as “magic bullets” that selectively kills microbes responsible for disease causation, but at the same time would not affect the host (Zaman et al., 2017).

Louis Pasteur in 1877, first discovered the properties of antibacterial compounds with the inhibition of anthrax by saprophytic bacteria. In 1928, Alexander Fleming observed that the growth of Staphylococcus aureus in petri dishes was inhibited by substances produced by the fungus Penicillium chrysogenum, which led to the discovery of the first antibiotic, penicillin (Aminov, 2017). Selman Waksman, discovered multiple antibiotics from filamentous actinomycetes living in the soil and defined an antibiotic as “a compound made by a microbe to destroy other microbes”. Following the discovery of Penicillin, various antimicrobial compounds such as sulphonamides, aminoglycosides, tetracyclines, lipopeptides, oxazolidinones, glycopeptides, streptogramins, and quinolones were discovered in the “Golden era” of antibiotics during the period from the 1940s to the 1960s and most of the antibiotics still in current use were discovered during that period (Salam et al., 2023). Millions of metric tons of newer classes of antibiotics have been produced in last 60 years since its inception.

The hot arid regions are spread over about 31.7 million ha area mainly in the States of Rajasthan, Gujarat, Andhra Pradesh, Punjab and Haryana, which inhabit on an average 61 persons per square km making up a population of nearly 20 million people. The Indian arid zone is characterized by high temperature and low and variable precipitation which limit the scope for high horticultural productivity. However, these conditions greatly favour development of high quality production of fruits such as date palm, ber, pomegranate, citrus, aonla, bael, grapes, guava and in vegetables such as cucurbitaceous crops, spices and some medicinal plants. The optimized technologies and inputs could increase the existing low productivity. It is now realized that there is a limited scope for quantum jump in fruit and vegetable production in the traditional production areas. The amelioration of the extreme conditions is also considered vital for life support to the inhabitants of this area.

Abstract

Soil is the store house of 1/4^th of the global biodiversity. Arbuscular mycorrhizal (AM) fungi is one of the important group of organism occurring in soil. The beneficial effect of AM fungi in improving plant growth is well documented. Many of the functions performed by AM fungi can provide essential services to human society. These services include nutrient cycling, soil structure, plant growth promotion, resistance against biotic and abiotic stresses and bioregulation of plant development. These services are not only essential to ecosystem function but also a critical resource for the sustainable management of agricultural systems. Recent studies have brought out that both plant biodiversity and ecosystem productivity increases with the increasing number of AM fungi. Thus, it appears that the diversity of AM fungi in soil is a major factor contributing to the maintenance of plant biodiversity and the ecosystem functioning. The role of AM fungi in ecosystem services, plant diversity and land productivity are discussed in this review.

The market of organic products is growing globally every year. This organic market expansion makes it possible for farmers to reap the benefits of a trade with relatively high price premiums. Organic farming is carried on in almost all countries of the world. The share of organic farms in overall farmland and in terms of numbers of holdings is growing continuously. The market for organic products is also growing very rapidly, not only in Europe, North America and Japan, where the largest markets are to be found, but also in many emerging economies in transition. In India, an organic movement is now emerging on different levels i.e. producer groups, trainers and advisors, certification bodies and processors and traders.

Abstract

Protected cultivation technology in black pepper and cardamom offers distinct advantages over conventional farming. Production of quality planting materials irrespective of the season was made possible. Such propagating materials can be well maintained under polyhouse, irrespective of the seasons and can be used judiciously for replanting/ gap filling. In this era of climate change, protected cultivation assumes significance. In black pepper and cardamom, rapid multiplication techniques of planting materials were made possible. A novel idea of growing pepper, different from conventional system as “bush” that can be grown under potted and field conditions were also developed. Nutrition and water management studies could be undertaken with precision. In cardamom, quality planting material production and high quality capsule production are made possible all throughout the year by the adoption of protected cultivation. For optimizing production, prescriptions of fertilizers, using DRIS norms were developed for black pepper and cardamom based on critical soil and foliar nutrient concentrations. Typical deficiency symptoms of major and micro nutrients on black pepper were characterized to rectify the deficiency. Technology for propagation and cultivation of bush pepper in pots, under protected cultivation was also developed and popularized. Technology for using organic manures, non edible oil cakes, biofertilizers towards production of high quality zero defect black pepper and cardamom was also developed and popularized.

Abstract

The objectives of the study is to help to create self-employment and provide proper information for different conventional milk based products. Traditional dairy foods have always played a crucial role in preservation of precious milk nutrients and promotion of its use among masses. The demand for milk and milk products is increasing with increasing of world's population. To meet these needs, high-end technology is needed for emerging the capability of milk production and preserving it by producing high quality milk products. The dairy industry is highly localized owing to perishable nature of milk products. Approximately 50% of the total milk produced in India has been projected to be processed into a variety of conventional milk products, such as khoa, chhena, paneer, dahi, ghee, kalakand and a wide range of sweets in rural areas mostly by the rural citizens. Therefore, setting up a milk-based food production system and updating conventional technologies to manage milk-based products on a commercial scale is very important.

Introduction

A planer machine is a commercial machine tool hired for transforming the metal blocks or metal workpiece into the desired calculated shapes by generating the flat surfaces on a workpiece. Similar to a shaper machine, a planer machine is used for forming flat surfaces on the work piece using the single-point cutting tool.Planer machines are generally hired for operation on the larger workpiece or metal structure (blocks) that cannot be achieved by the shaper machine. They generally have larger beds and larger reciprocating movements covering a greater working length and surface area as compared to shaper machines.