eChapters

Vulnerability of Soils

Soil vulnerability, Soil degradation, soil vulnerability index

Water and wind erosion, depletion of soil organic matter, loss of plant nutrients, salinity, alkalinity, acidity, pollution and contamination, compaction, sealing, crusting, water-logging, aridity, lowering of water table, over grazing, deforestation, landslide, loss and change in soil biodiversity, Abandoned mines etc.

Soil vulnerability, Soil Degradation, Soil Vulnerability Index

The terms vulnerable and vulnerability are now bites of every one and used for everything. Vulnerable means to the possibility of attack or harm by any mean. Human beings are vulnerable to Covid-19, computers are vulnerable to virus, softwares are vulnerable to hackers and attackers to control system, environment is vulnerable to pollution. Vulnerabilities refer to the lack of ability to resist the effects of the aggressive environment. Soils are vulnerable to numerous threats like water and wind erosion, depletion of soil organic matter, loss of plant nutrients, salinity, alkalinity, acidity, pollution and contamination, compaction, sealing, crusting, water-logging, aridity, lowering of water table, over grazing, deforestation, landslide, loss and change in soil biodiversity etc. However, this book will describe some of the most pertinent vulnerabilities for soils.

In the earlier chapter the major soil vulnerability namely, water and wind erosion, depletion of soil organic matter, loss of plant nutrients, salinity, alkalinity, acidity, pollution and contamination, compaction, sealing, crusting, water-logging, aridity, landslide and abandoned mines were described. In this chapter two more parts, Importance of remote sensing (RS) and geographical information system (GIS) in soils and Watershed management are also included after seeing their importance in agriculture and soils. Restoration means that by various actions or processes to return something to its original owner, site, place, or condition. In this context our aim is to restore our mother soil from various vulnerabilities by different actions and processes to its natural and original condition up to the maximum possible extent. Management is defined as the scientific methods to attain targeted production through planning, organising, training and fixing targets for employees. Therefore, after the restoration, soils should be managed according to scientific method of action by scientifically selected and trained staff to perform the assigned responsibilities, effectively, efficiently and rapidly within stipulated period. On these guidelines restoration and management of vulnerabled soils is described here,

1.1. Soil Resource Evaluation

Soil is the essence of life on the planet Earth. It has sustained humanity and human civilizations through five functions (Karlen et al. 1997) viz., i) sustaining biological activity, diversity and productivity; ii) regulating and partitioning water and solute flow; iii) filtering, buffering, degrading, immobilizing and detoxifying organic and inorganic materials, including industrial and municipal byproducts and atmospheric decomposition; iv) storing and cycling nutrients and other elements within the earth’s biosphere; and v) providing support to socioeconomic structures and protection for archaeological treasures associated with human habitation. Reeling under the pressure of increasing food, fodder, feed, fibre and fuel production, soil has been used as a medium of plant growth with considerable reliance on external supply of major nutrients, irrigation water, plant protection chemicals, etc. Although soil, a product of millions of years of weathering, has supported various forms of terrestrial life, its sustainable management holds the key for meeting the basic requirements of burgeoning population and development commitments. So intense has been the pressure of increasing food, fodder, feed, fibre and fuel production that the soil has been exploited often exceeding its carrying capacity. The soils are increasingly used for agricultural and non-agricultural uses, such as disposal of farm, urban and industrial wastes, ensuring environmental safety etc. This is possible by the judicious use of this resource.

A clear and intimate knowledge of the kinds of soils and their extent of distribution are essential prerequisites in developing rational land use plans for agriculture, forestry, irrigation, drainage, etc. soil resource inventory or mapping provides an insight about their potentials and limitations. It is therefore imperative to prepare an inventory of this resource for developing optimum land use plan and conservation plans.

Soil survey is essentially a study and mapping of soils in their natural environment. It is the systematic examination, description, classification and mapping of soils of an area.

2.1. History of Soil Survey in India

The original investigations on Indian soils were carried out by Voelcker dates back to 1893 and by Leather to 1898.They classified the soils of the country into four major groups, namely the Indo-Gangetic alluvium, the black cotton soil or regur, red soil and laterite soil. Schokalskaya (1932) has published a soil map of India based on the Russian concept which describes 16 soil groups such as climate,vegetation, soil-forming materials, salinity, alkalinity, swamps and peats (Bhattacharyya et al. 2013). In 1935,Wadia and his co-workers collected a soil map of India with significance on geological formations and classified the soils as red, black (regur), laterite and lateritic soils of Peninsular India and also Indo-Gangetic Plains (IGP) which includes delta, desert, bhabar, terai and alkali soils. Vishwanath and Ukil (1943) published a soil map of India by placing the soils in different climatic zones for the first time. This was prepared by Imperial Agricultural Research Institute, New Delhi, and published in the year 1943. There were 17 kinds of soils identified, viz., deep black soils, black clay soils, black loamy soils, black sandy soils, red sandy soils, brown sandy soils, red and yellow soils, dark reddish brown soils, mixed soils (white and yellow), alluvium (Indus, Gangetic, Brahmaputra), coarse alluvium, soils of swamp lands, calcareous soils, usar soils, kallar soils, coastal alluvium soils and soils of Great Himalayan Ranges.

Soil survey works were started in 1954, in most of the states as a part of their agricultural development programme, and Bihar (Soil Survey and Land use Planning Scheme, Sabour) was pioneer. In 1954, the soil survey work was started under the leadership of Dr. P. P. Jha following the conventional procedures in Bihar (including Jharkhand) to delineate the soil associations based on geology, relief, physical and chemical characteristics of soils for the first time in India by the then Soil Survey Scheme at Sabour (Mishra et al. 2001; Mishra 2015, 2016). Meanwhile, the National Atlas Organization, Kolkata, prepared a soil map of India in 1957 classifying Indian soils into six major groups and 11 broad types. Murthy and Pandey (1983) applied the working principles of the USDA 7^th Approximation in classifying the Indian soils with available data on soil classes and thus used the US system for the first time at great soil group level, which was transformed into a soil map of India on 1:6.3 million scale. Mishra et al. (1994) attempted to propose “Fluvisols” as the 13th Order in USDA Soil Taxonomy for active floodplain soils frequently occurring in different parts of India and elsewhere. Mishra (2015, 2016) proposed a framework of Indian system of soil classification mainly based on land use options.

Soil Classification

Soil classification deals with the systematic categorization of soils based on distinguishing characteristics as well as criteria that dictate choices in use.

Soil classification is grouping of objects in orderly and logical manner into classes based on the properties of soils (differentiating characters) for the purpose of studying and identifying them. The soil individuals are grouped into classes of the lower category (soil series) which are grouped into classes of higher categories (soil orders). The lower categories are defined by large number of differentiating characters and higher category by a few differentiating characteristics.

For soil resources, experience has shown that a natural system approach to classification, i.e. grouping soils by their intrinsic property (soil morphology), behaviour, or genesis, results in classes that can be interpreted for many diverse uses. Differing concepts of pedogenesis and differences in the significance of morphological features to various land uses can affect the classification approach. Despite these differences, in a well-constructed system, classification criteria group similar concepts so that interpretations do not vary widely. This is in contrast to a technical system approach to soil classification, where soils are grouped according to their fitness for a specific use and their edaphic characteristics.

In recent times, the interpretations cover a wide spectrum of soil uses, both for agricultural and non agricultural (sewage and human waste disposal, high way construction, water and gas supply, recreation, wild life, urban and industrial structures) and many specialized uses. Soil survey if correctly carried out according to scientific principles, can provide the data base for various interpretations. This is because the same soil properties determine the behaviour of a soil for a variety of different uses. For instance, the content of clay, silt and sand, the shrink and swell behaviour, the permeability of soil to water and air, content of calcium carbonate, salts, organic matter, gypsum, soil depth, depth of ground water, hard pan formation, co-efficient of linear extensibility, water holding capacity etc. are examples of such properties that are important to plant growth and these properties also strongly influence non farm uses. Some examples in support are

A hard or petrocalcic horizon or other slowly permeable layer (clay-pan) in a soil restricts the movement of air and water, thus adversely affecting the plant root growth. Such a layer limits the soils suitability for septic tanks and other onsite waste disposal. It also makes a poor sub grade for high way construction.

A soil high in soluble salts is a poor medium for plant growth; it is also corrosive to iron and steel structures, such as pipelines and fences, causing high maintenance and repair costs.

High organic matter content is generally favourable to plant growth, but it is a limitation for road construction.

The strongly gypsiferous soils (gypsum content >10%) are considered unsuitable for arable crop cultivation because of its dissolution under irrigated or even moderate rainfall and making the surfaces uneven through the developments of sink holes. Such soils are unsuitable for irrigation and drainage canal networks and also for construction of roads, bridges etc.

The shrink- swell soils of India (vertisols) because of summer monsoon rains are suitable for growing a “kharif” crop but are very dangerous for construction of roads, air strips, buildings, laying gas, water pipelines which get distorted, develop cracks and lead to sunken floors etc.

Land is merely an area of the earth’s surface comprising all physical, chemical and biological environments that influence the land use (FAO ,1976). Land refers not only to soil but also to climate, landforms, hydrology, geology, natural vegetation including fauna and flora. The land use simply means management of a land for specific uses to meet the human needs in all rural, urban and industrial context, whereas the land use plan refers to a coherent set of decisions about the ways to achieve the desired level preferably on economic background. Thus, the land use planning is the systematic evaluation and assessment of a land and associated attributes for the purpose of identifying the best land use options beneficial to landowners or users without degrading the land resources or environment. It includes not only the landowner or users, but also the policy or decision makers as well as economic experts for financial measures from planning stage or logistic planning to execution.

Land cover

Relates to the type of feature present on the surface of the earth e.g., Fields, trees, concrete high ways.

Land use

Relates to the human activity associated with a specific piece of land. The same land would have a land cover consisting of roofs, pavements, grass and trees. The land use in an area is really an intervention by the people over the existing natural eco-environment for satisfying their needs.

Land cover is distinct from land use despite the two terms often being used interchangeably. Land use is a description of how people utilize the land and socio-economic activity - urban and agricultural land uses are two of the most commonly recognised high-level classes of use. At any one point or place, there may be multiple and alternate land uses, the specification of which may have a political dimension.

1.1 Some Useful Formulas Related to Farm Machinery

2.1 Some Useful Formulas Related to Farm Power

PESTS OF CEREALS

Rice (Oryza sativa)

Rice is the staple food of a vast majority of people throughout the world, especially in India. Rice crop is grown in about 75 million acres, which is about one-third of the total world area under rice. The warm and humid environment for the rice crop is best suited for invasion by several insect pests and as many as 85 species of insects are known to infest this crop. The damages caused by different pests extend from the seedling to harvest stages of the crop. Some of these pests are widely distributed and cause extensive damage. The more important pests are described below:

1. Rice stem borer or Rice yellow stem borer

Scirpophaga (Tryporyza) incertulas

Order - Lepidoptera

Family - Pyraustidae

Among the pests, which ravage rice crop, ‘rice stem borer’ is a major one and infests rice crop at all growth stages, from seedling to flowering. It is a specific pest of rice alone and is more serious during the months of October-January. The pest has a wide distribution in all Asian countries. The damages caused by this pest ranges from 5-20 per cent. Generally, late varieties of rice are more severely infested than the early maturing varieties, because of the possibility of the pest multiplying in larger numbers by the time the late varieties come to maturity. Cold weather with high humidity and low temperature prevalent during October-December is found to be conducive for the multiplication of the insect.

Mango (Mangifera indica)

1. Mango hoppers

(i) Amritodes atkinsoni (ii) Idioscopus niveosparsus and (iii) I. clypealis

Order - Hemiptera

Suborder - Homoptera

Family - Cicadellidae

Nature of damage. Three different species of hoppers are found to cause damage to mango trees. During some years, especially during the months of November-February, when the mango trees come to flowering, the pest appears in large numbers. During the other months, the pests are seen in much lesser numbers in an active form, while the other insects hibernate under the bark of the trees. Even in the peak period of pest occurrence, after a few heavy showers, the number of insects is considerably reduced.

During the cold season, when the trees put out the flower spikes, thousands of hoppers, young and adults appear in large numbers, pierce, suck and feed on the sap from the tender shoots, flower stalks, flowers and buds. This drain of the sap causes the buds and flowers to dry, wither and they are shed in large numbers, as a result fruit production may go down by 25-60 per cent. When a severely infested tree is approached, thousands of hoppers hop or fly about and make a rustling noise, as they dash against the foliage. The hoppers exude a sweet, sticky fluid excretion and this fluid thrown out by myriads of these insects after feeding on the tree sap, wets the soil underneath the trees and on the surface of the leaves of the trees. In case of severe infestation, the fluid may fall down in drops. The secretion attracts scores of flies, bees and other insects, which come to feed on the secretion. The infested tree presents a sickly appearance. The trees get devoid of buds and blossoms. The leaves appear shiny and are covered by ‘sooty mould’, a fungal disease. Thousands of caste skins of the nymphs are found on the shoots and leaves. The continuous damage caused to the trees year after year by the pest makes them loose their vigor gradually and eventually leads to severe reduction in their yielding capacity.

Life cycle of the pest. The female hopper inserts spherical, pale whitish eggs singly into the plant tissues through slits made in the young shoots, flower stalks and flower spikes. The eggs hatch in 4-6 days and the young nymph hatching out of the egg looks quite similar to the adult. The nymphs are very active and move about rapidly along the flower spikes and shoots, suck and feed on the plant sap. They are smaller in size, wingless and unable to fly or jump. The young ones moult their skin a few times during their growth and become adults in 10-15 days. The adult hoppers are small insects, about 3.0 mm. in length with a wedge-shaped body. The head is broader and the body gradually narrowing backwards. The legs are well developed, especially the hind legs. The general color is light greenish-brown. They are extremely active and can fly and hop around. They have a tubular, sucking mouthpart by which they puncture the tender plant parts and floral parts. The adults of Idioscopus clypealis are smaller, with two black spots on the prothorax and a few black spots on the front portion of the head, while those of Idioscopus niveoparsus are slightly bigger with three black spots on the prothorax and whitish, distinct cross bands on the light brownish forewings. The adults of Amritodes atkinsoni are bigger than the other two species, about 5.0 mm. in length, with two black spots on the prothorax. Two or more generations may appear during the flowering season of mango trees (Fig.71).

Insect and non-insect pests cause extensive damage to standing crops, stored grains and stored products resulting in huge economic loss. Besides these, several pests cause annoyance, as well as attack livestock such as, cattle, poultry and pet animals. Some others damage household articles such as, clothing, upholstery, carpets, paper, books, leather articles, wooden and bamboo furniture and all sorts of wooden structures. These obnoxious creatures besides consuming any kind of food materials, spoil them by contaminating and polluting them with their faecal matter and urine and impart a repulsive, bad odor and make them unfit for consumption by humans and livestock. The damages caused by them pave the way for easy access and infection by some of the saprophytic microorganisms, which hasten the deterioration process. A few of these microorganisms produce mycotoxins, which are poisonous and may even be fatal to the consumers.

Among the household pests, cockroaches, crickets, silver fish, ants, white ants, carpet and powder post beetles and clothes moths are quite important. These insects not only cause annoyance but different types of flies, mosquitoes, bugs, fleas and lice either suck and feed on the blood from humans, cattle, poultry etc. but are also responsible for disseminating several disease causing microorganisms.

This chapter introduces the essential components of laboratory work that form the foundation for veterinary parasitology and molecular biology research. A well-equipped laboratory along with proper safety protocols and correctly prepared reagents, is the key to reliable experimental outcomes and a secure working environment.
The following sections describe the standard operating procedures and laboratory biosafety, standard equipment used in research work, and the fundamental principles of solution preparation. These basic laboratory skills are essential prerequisites for the specialised techniques covered in subsequent chapters on veterinary parasitology, molecular biology and bioinformatics. Understanding and applying these foundational concepts allows researchers to maintain experimental consistency, ensure reproducible results, and conduct investigations safely and efficiently. The methods and principles outlined here will be regularly applied throughout the various techniques detailed in this manual, serving as essential knowledge for all laboratory personnel as well short-term visitors.
1.1 Laboratory Standard Operating Procedures and Safety
Laboratory safety is fundamental to protecting personnel, maintaining sample integrity, and ensuring reliable experimental outcomes. This section outlines essential laboratory conduct, safety protocols for personnel and equipment, waste management, and emergency protocols for standard laboratories carrying out diagnostics as well as research.

This chapter explores the essential techniques used in veterinary parasitology to collect, identify, and diagnose parasitic infections. These methods are crucial for understanding general animal health, the complex relationships between parasites and their hosts and for tracking disease outbreaks, that will ultimately allow the development of effective control strategies. Whether in a research lab or a clinical setting, the techniques discussed here are widely used to detect and study parasites that impact both domestic and wild animals.
2.1 Collection of Specimens for Parasitological Examinations
Different species of parasites affects almost all parts of the host. These organisms can inhabit virtually every organ system of the host animal, from the brain and lungs to the digestive tract and skin. Therefore, a thorough examination of both living animals and post-mortem cases is essential for collecting parasites and determining cause of death (when applicable). When collecting from live animals, samples should be collected after through exanimation of the animals and following the standard procedure. The collection of correct samples, use of appropriate transport media and proper handling of specimens are crucial factors that directly influence diagnostic accuracy.
The type of specimen collected depends on the methods of identification and diagnosis. For example, diagnosis of blood parasites requires specific types of samples: peripheral blood smears for microscopic examination of hemoprotozoans, serum or plasma for ELISA and other serological tests, and unclotted whole blood for molecular diagnostic methods such as PCR and qPCR.

This chapter outlines fundamental molecular biology protocols essential for genomic analysis and molecular characterisation. Modern molecular biology relies heavily on precise analytical techniques for studying genetic material. Hence, this section presents a typical workflow encompassing nucleic acid extraction, amplification, and subsequent analysis. These methodologies are fundamental to various applications in molecular biology, including phylogenetic analysis, gene expression studies, and molecular diagnostics.
The chapter covers four core molecular biology and bioinformatics techniques, each building upon the previous:
1. Genomic DNA Extraction: Protocols for efficient isolation of DNA from biological samples. This encompasses cell lysis, protein denaturation, and nucleic acid purification through standard separation techniques. The quality and purity of extracted DNA significantly influences downstream applications.
2. Primer Design with Primer3: In silico design of oligonucleotide primers for PCR amplification. This section covers primer design parameters including optimal melting temperature (Tm), GC content, primer length, and considerations for avoiding secondary structures and primer-dimer formation.

The domestication of oxen in Mesopotamia and the Indus Valley Civilization, perhaps as early as the 6th millennium B.C. provided mankind with the draft power necessary to develop the early plough into the larger, animal-drawn true ard (or scratch plough). Some of the earliest evidence of ploughing from around 2800 B.C.was found at the Indus Valley site of Kalibangan. Subsequent archaeological finds in Prague, Czech Republic, push the oldest known ploughed field even further back to 3500-3800 B.C. All food produce was planted and harvested by hand: seeds were scattered by hand and planted grains were brought from the field to be threshed on the dooryard. Milking a small herd of cows or goats was also done by hand. This continued for centuries. Then man discovered electricity.

In 1746, just a few years before Benjamin Franklin of Philadelphia sent a kite to catch lightning in a storm, a Doctor von Maimbray gave talk to the Royal Society of London where he described his experiment of electrifying the myrtle bush (Morella cerifera) which then put forth new branches in October, something which had never happened before. This news inspired others in Europe to carry out similar experiments. In 1749, Abbot Jean Antoine Nollet of the Royal Academy of Sciences in Paris France, inventor of the electroscope, published a pamphlet on “The Harmful Effects or Advantageous of Electrical Phenomena on Plants.”¹Isolated experiments continued until in 1783 Father Pierre Bertholon de Saint-Lazare of Montpellier published “About the Electricity of Plants”, a work in which he dealt with the effect of atmospheric electricity on plants, taking in their medicinal and nutritive-electrical virtues and but in particular the practical means of applying it usefully to agriculture.²He even built an electro-vegetometer, a device for collecting atmospheric electricity to distribute it in the soil and then to the plants, but he met with little success. Bertholon also conceived of subjecting plants to “electric rain” by connecting a large syringe to an electric source. A gardener, standing on a slab of insulating material in a wagon, carried a sprinkling can electrified by means of a wire leading to a static machine. “By means of this process, strange for the times, the good Abbé Bertholon, who was considered something of a sorcerer, obtained lettuces of an extraordinary size.”3

In 1920, although electric vehicles were not used on the American farms about 5,000 electric industrial trucks were produced by 12 American manufacturers, while estimates of the total fleet ranged from 6,000 to 15,000, most of them built during the war. Most used an exchange charging system. Among the manufacturers seen in and around cities and towns were the Commercial Truck Company, the Lansden Company, the Walker Vehicle Company (now owned by Commonwealth Edison), the Ward Motor Vehicle Company, the Steinmetz Electric Motor Corporation, Walter Motor Truck Company, and the Baker R L Corporation.One step away from agriculture, Charles A. Ward of New York City, was head of his family’s baking company, made up of the Mackey Company, the Ward Corby Company, the Ward Bread Companyand the Ohio Baking Company of Cleveland. In 1911, Ward had decided to replace his horse-drawn delivery vehicles with electric trucks, thus doing away with the unsanitary stable hitherto part of or adjacent to bakery.¹

Alongside this, the challenge of using stationary electric agricultural machines continued to be met. Two innovations which entered into dairy farming were the milk cream electric centrifugal separator and the surge milker. The Babson brothers (Henry, Fred and Gus) of Chicago were friends of and dealers for electrical battery inventor and entrepreneur Thomas Edison, and importers of Belgian-made Méllote separators. In 1916, the Babsonsproduced their own Pine Tree milking machine. While the overall design was similar to others, the electrically powered Pine Tree Pulsator outperformed any other pulsator made. These machines were powered by a 32-volt Delco system with 12 batteries near the barn. Pine Tree Pulsators were simple enough that the farmer could maintain them himself. The Pine Tree Pulsator was patented in 1921. The problem with this unit was that it was difficult to keep clean.

The 21^st century dawned with interest in the potential of electric agricultural machines. Beginning in 2000, a concept study, MELA Mobile Elektrische Leistungsund Antriebstechnik Mobile (electric power train technology)supported by universities and organizations in Germany as well as Fendt Agricutural Company (AGCO) showed a possible solution on tractor electrification with electric driven auxiliaries as well as electric CVTs and implement electrification. In 2003 the University of Hohenheim developed an electric combine harvester called Magda. With the introduction of a 42 VDC power supply system, the range of small rotational drives and servo motors could be covered. They showed that if more power had to be transmitted, threephase alternating current should be used since threephase machines had a large speed range and a large range of constant power.

During the first years of the century, longestablished transport manufacturers have been quick to see the environmental advantage of electric propulsion, be it with batteries, hybridelectric or fuel cell. With airliners, Boeing, Airbus and Tupolev quickly saw the advantage. With motorcycles, names such as HarleyDavidson, Curtiss, Ducati, Saroléa and Royal Enfield have positioned battery packs between two wheels. With trucks, Daimler, Toyota, Cummins, Peterbilt, DAF, Volvo, Leyland, Kenworth, and Isuzi, among others have taken the electric route. With buses, Alexander Dennis, Scania, Volvo, New Flyer, Van Hool, DAFVDL, Blue Bird, Heuliez, Rampinican carry their passengers more silently. It therefore seemed only logical that traditional agricultural machinery builders should make the same transition. The first to do this was John Deere, established in Moline, Illinois in 1837.

This chapter traces the history of the electric quadcopter commonly known as the drone, prior to its use in agriculture.

As long ago as 1493, the versatile Italian Leonardo de Vinci, painter, sculptor, machine designer often inspired by his observations of Nature, made a sketch in one of his little notebooks of a screw-like machine next to which he wrote in his mirror-handwriting:

If this instrument made with a screw be well made – that is to say, made of linen of which the pores are stopped up with starch and be turned swiftly, the said screw will make its spiral in the air and it will rise high.¹

Four centuries later, in 1863, the Viscount Gustave du Ponton d’Amécourt, President of The Society for the Encouragement of Aerial Locomotion by Means of Heavier than Air Machines, published a forty-page monograph in Paris, entitled “The Conquest of the air by propeller. Account of a new system of aviation.” In this he took the Greek words helico and pteron, meaning “spiral” and “wing”, and combined them into the word hélicoptère (helicopter). D’Amécourt and his friends were among those very few who were passionately convinced that the future of flying was with heavier-than-air machines. To prove their point, having built a fragile flying machine model driven by clockwork springs, they watched it ascend vertically for a few seconds to a height of less than 3 metres (10 feet), only to crash back to the ground.

EAAMs (Electric Agricultural Aerial Machines) have emerged from drones used for both aerial filming, as toys and even as racing units. A Price water house Coopers’ study revealed that the global market for drone-powered business solutions was valued at $127.3 billion in 2016. For agriculture, prospective drone applications in global projects were valued at $32.4 billion. Stelios Kotakis and colleagues at market research firm IHS Markit projected that there would be around 400,000 shipments of drones to firms in the agriculture and forestry sectors in 2017. The Food and Agriculture Organization (FAO) of the United Nations projects that by 2050 humanity’s ranks will likely have grown to nearly 10 billion people. Farmers will need to produce more with less, while preserving our environment for future generations. And society has a duty to help them achieve this. Although agriculture is perceived as a traditional economic sector, precision agriculture technologies have already boosted crop yields significantly in the last decades. The same study forecast that agricultural consumption would increase by 69% from 2010 to 2050.

In 1920, a 30-year-old Czech writer Karel Èapek, wrote a play called “R.U.R.” (Rossumovi Univerzální Roboti or Rossum’s Universal Robots). For this dystopian work about a bad day at a factory populated with sentient androids, Èapek called the androids “roboti”, as suggested byhis brother Josef, a painter and writer. It was premiered in Prague on 25^th January, 1921.

Èapek was admired for his opinions:

My dear Miss Glory, Robots are not people. They are mechanically more perfect than we are, they have an astounding intellectual capacity, but they have no soul.

But surprisingly he was keen on gardening!

Mangroves Definition

A mangrove is tree, shrub, palm or ground fern, generally exceeding one and a half meter in height that normally grows above mean sea level in the intertidal zone of marine coastal environment and estuarine regions of the tropical and subtropical coastlines (Duke 1992). The mangrove is also defined as assemblages of salt tolerant trees and shrubs. Mangroves are taxonomically heterogenous and more related to environment than terrestrial or aquatic plants.

The term ‘mangroves’ is used to define both a group of plants and a community. To avoid confusion, Macnae (1968) proposed the term ‘mangal’ for the mangrove forest community, and the term ‘mangroves’ for the plants. Other terms for the mangrove forest community are coastal woodland, oceanic rainforest, intertidal forest, tidal forest, blue carbon forest, mangrove forest, and mangrove swamp.

Generally, mangrove species are grouped into two types: Exclusive and Non-Exclusive. The exclusive species are limited to the mangrove habitat, and they are also referred to as strict mangroves, obligate mangroves or true mangroves. The non-exclusive species are mainly distributed in a terrestrial or aquatic habitat, but they also occur in the mangrove habitats and they are referred to as semi-mangroves, back mangroves or mangrove associates. Tansley and Fristch (1905) are the first to introduce the criteria to classify mangrove species into true mangroves and mangrove associates. Tomlinson (1986) used rigid criteria to distinguish true mangroves from mangrove associates. In his criteria, true mangroves possess all or most of the following features:

Origin and diversification of Mangroves

Mangroves are quite old, possibly arising just after the first angiosperms (Duke 1992). Based on the fossil evidence and recent molecular studies, it is believed that mangroves originated along the shorelines of ancient Tethys Sea and there was a dispersal along the Tethys seaway westward into the Atlantic and further into the east Pacific (long before the closure of the Panama Isthmus) and eastward into South east Asia and Australia during the Late Cretaceous or early Eocene around 80 million years ago (Duke 2006). Nypa seems to be earliest fossil evidence. However, prior to closure of Tethys sea, around 40-55 million years ago, the mangrove genera - Nypa, Acrostichum, Rhizophora, Avicennia, Pelliciera, Sonneratia, Bruguiera, Ceriops, Heritiera, and Aegiceras - were present around shoreline (Duke 2017). The closure of Tethys Seaway by the mid-Tertiary (34-50 Million years ago) by northward movement of African landmass, created a physical barrier that completely terminated the Atlantic East Pacific (AEP) and Indo-West Pacific (IWP) exchange route, and resulted in subsequent diversifications within the AEP and IWP regions influenced by region-specific events (Ellison et al. 1999; Duke 2006). The plate tectonics and other vicariant events like Pleistocene sea level rise are attributed to the current distribution pattern and disjunct distributions of species within genera. Duke (2017) hypothesised two separate westward dispersal routes in AEP: (i) a southern path along the coasts of West Africa, South America and, (ii) a northern path along the North American east coast, whereas he hypothesised two isolated pathways in IWP towards eastward dispersal: (i) a northern path along the coast to the Middle East, Southeast Asia and, (ii) a southern path along the coasts of East Africa, India, and Australia. Further he noted that collision of India and Australia with Middle East and Southeast Asia respectively, resulted complication in dispersal route. Based on the available records it is presumed that diversification of mangrove plants has largely been driven by three key processes of speciation viz., Allopatric speciation, Peripatric speciation and Parapatric speciation (Duke 2017).

Distribution of Mangroves in India

Mangrove forests in India are found along the coastline of 9 States and 4 Union Territories (Fig. 5). The mangrove habitats are broadly classified into three namely, Deltaic (Eastern Coast Mangroves), Estuarine & Backwater (Western Coast Mangroves) and Insular mangroves (A & N Islands) (Mandal and Naskar 2008). India has a total mangrove cover of 4975 km²; of which, 57% is present along the east coast (Bay of Bengal); 31% along the west coast (Arabian Sea) and the remaining 12% in the Andaman and Nicobar Islands (FSI 2019).

West Bengal

In West Bengal, mangroves are present in Sundarbans, the large deltaic complex of three major rivers, the Ganges, Brahmaputra and Meghna, and 62% of total area is shared by Bangladesh and 38% by India. The Sundarban Biosphere Reserve (SBR), at the confluence of the Bay of Bengal covering an area of 9,630 km², lies between 21°40′N and 22°40′N latitudes and 88°03′E and 89°07′E longitudes, spreading in districts of South and North 24-Parganas in West Bengal, India. The major portion of SBR is designated as Reserve Forest, covering nearly 4260 km² and the area under mangrove vegetation is 2112 km² (FSI 2019). Compared to 2017 assessment there has been a decrease of 2 km² area of mangroves. The mangroves and their associates in the SBR exhibit great generic and species diversity and it is abode to rare and highly endangered flora and fauna, as well as, the only mangrove-tiger (Royal Bengal Tiger - Panthera Tigris tigris) kingdom in the world. Recognizing importance and uniqueness, the United Nations Educational, Scientific and Cultural Organization (UNESCO) declared the Indian part of Sundarbans as a ‘World Heritage Site’ in 1987, and also designated the ‘Sundarban Biosphere Reserve’ under the UNESCO Man and the Biosphere (MAB) program in 2001. Recently, Sundarbans has been declared as a Ramasar Site, considering ecological significance. Totally 33 true mangrove species belonging to 21 genera and 13 families have been identified in Indian Sundarbans. Among the mangrove species listed, Rhizophora apiculata, Bruguiera parviflora, Ceriops decandra, Kandelia candel, Aglaia cucullata, Excoecaria indica, Xylocarpus moluccensis, Xylocarpus granatum, Heritiera fomes, Scyphiphora hydrophyllacea, Brownlowia tersa, Nypa fruticans, Acanthus volubilis, Dolichandrone spathacea and Phoenix paludosa are under serious threat in Sundarbans (Kathiresan 2008; Gopal and Chauhan 2006). Particularly Heritiera fomes (locally called Sundari, from which Sundarbans derives its name), Nypa fruticans and Phoenix paludosa are declining rapidly due to the reduction of freshwater input (Gopal and Chauhan 2006).

Mangrove forests are ecologically significant and economically important (Kathiresan 2018). They provide ecosystem services worth at least US$ 1.6 billion each year and support coastal livelihoods worldwide (Costanza et al. 1997). They serve as the nursery, feeding and breeding grounds for crabs, prawns, molluscs, finfish, birds, reptiles and mammals. A large amount of global fish catches (up to 80%) is dependent on mangroves, thereby ensuring the food security of coastal people (Ellison 2008). The mangroves provide firewood, timber, cattle feed, honey, medicines and tourism development. They protect groundwater aquifers from seepage of seawater, thereby ensuring water security for coastal population. Mangrove forests remove coastal pollution particularly toxic heavy metals. They offer coastal protection against the fiery effects of natural calamities such as tsunami, storm surges, cyclone and floods (Kathiresan and Bingham 2001; Kathiresan and Qasim 2005; Kathiresan and Rajendran 2005). The potential of mangroves in carbon capture and sequestration is remarkable in mitigating the impacts of global warming and climate change (Kathiresan et al. 2013, 2014).

Threats

There are sixteen threat factors have been identified from Indian mangroves (Kathiresan 2010). However, habitat conversion for agriculture and aquaculture activities, environmental pollution by upstream anthropogenic activities, Climate change processes (e.g. sea level rise; increasing frequency of cylones, etc.) are the major threat factors for mangroves. Mangroves are able to cope up with short-term oscillations and long-term fluctuations of climatic conditions, but the consequences of global climate change, such as increased extreme events, will have unprecedented effects on biota and threaten the resilience and recovery potential of the ecosystems (Harris et al. 2018; Sippo et al. 2018). Despite conservation measures, the mangroves still experience an annual loss of 0.2-0.7% during 2000-2012 and they remain the most threatened ecosystem of the world (Hamilton and Casey 2016).

INTRODUCTION

Anatomy is the branch of biological science which deals with the form and structure of organisms. The word “Anatomy” is derived from Greek, means cutting apart (Ana –separate, tomy-cut).

The study with unaided eye is Gross Anatomy / Macroscopic anatomy while the study of finer details of structure with the aid of a Microscope is Histology / Microscopic Anatomy.

SCAPULA

OX: It is a flat, triangular bone situated on the antero-lateral part of the thorax. It is directed obliquely downward and forward. It has two surfaces, three borders and three angles.

The lateral surface is traversed by the scapular spine which divides it into the supraspinous and the infraspinous fossae. The spine is rough and tuberous in the middle and is prolonged downwards to form the acromion process (Fig.2.1). The medial surface presents subscapular fossa and its upper part presents anteriorly a triangular rough area and posteriorly a rough line (Fig.2.2).

Skull: The skull of domestic animals has two sets of bones i.e facial and cranial bones. The facial bones are placed in front and cranial bones are placed caudally.

Facial bones: The paired facial bones are premaxilla, maxilla, nasal, pterygoid, lacrimal, turbinates, malar and palatine bones. The unpaired facial bones are mandible, hyoid and vomer.

Thoracic Vertebrae

Ox: Thoracic vertebrae characterized by well developed neural spines, short bodies with capitular facets and transverse processes with tubercular facets for articulation with the ribs (Fig.4.1).

LUMBAR VERTEBRAE

Ox: The lumbar vertebrae are characterized by elongated flattened transverse processes (projecting outwards) and large, strongly curved articular processes (Fig.5.1a). The body is constricted in the middle and expanded at the extremities. The anterior extermity is less convex and posterior is less concave. The posterior vertebral notches are much deeper. The intervertebral foramina are often double in the anterior part of the series and are very large further back.

OS COXAE

Ox: The os coxae or hip bone consists of 3 flat bones i.e ilium, ischium and pubis which fuse together to form the acetabulum.

Ilium: is largest of the 3 parts. It shows three surfaces, three borders and three angels. The lateral (gluteal) surface presents gluteal line parallel to cotyloid border. The medial surface consists of rough medial triangular part, the sacral surface for articulation with sacrum and a smooth quadrilateral part, iliac surface. The iliopectineal line separates these surfaces and bears psoas tubercle in its middle (Fig. 6.1).

Industrial waste can be solid, liquid, or gaseous in type and is generated by industrial activities throughout a manufacturing process. Depending on its nature, it can be hazardous or non-hazardous. It is important to note that hazardous wastes can be ignitable, toxic, reactive, corrosive, or radioactive and can pose a threat to the environment. Industrial waste includes, among other things, paints, concrete, paper goods, sandpaper, metals and chemical solvents. Most industries face a significant problem associated with the disposal of waste. Due to the significant expenses involved, it is not feasible to collect and treat all of the waste due to the sizeable volume of waste produced by numerous businesses. As a result, especially in developing nations, the majority of industrial wastes are illegally deposited on wastelands like deserted fields

The basic methods for wastewater sewerage (collection, treatment, and disposal) are as follows:

• Off-site sewerage
• Separate sewerage system
• Combined sewerage system
• On-site sewerage

Many nations have implemented separate sewage systems that transmit sewage and storm water through separate pipelines in order to separate the two. Storm water often does not contribute to a wastewater treatment facility (WWTP). Domestic sewage contains 99.9% or more water. The remaining portion is made up of bacteria

Wastewater is defined as water that has been altered by certain substances, resulting in changes in its physical, chemical, or biological properties. These changes render it unfit for certain uses, such as the purpose of drinking. Since almost all of man’s daily activities are dependent on water, therefore ‘waste’ is discharged into the surroundings as a result of these actions. There are a number of substances that can be harmful to the environment and make people sick, including chemicals, detergents, household cleaners, dirt, microorganisms (germs), and body wastes. The water supply generates a great deal of wastewater, so it is essential that it is treated in order to reduce the amount of waste that it generates. Essentially, wastewater treatment ensures that a healthy environment is created and public health is protected by removing the majority of pollutants found in wastewater through the treatment process. Consequently, wastewater management plays an important role in protecting the planet, and public and economic health, as well as social, economic, and political stability.

4.1 Biomass Energy Resource

Among the various methods for producing electricity, biomass is one of the most common. This method uses animal waste, wood pellets, etc. to produce electricity. The use of biomass energy has proven beneficial over time and has the potential to be both reliable and consistent as an alternative energy source.

Organic matter is simply referred to as biomass. Or, to put it another way, biomass is anything living or ever living, including animal waste, crop waste, garden trash, etc. As a result, biomass renewable energy is the energy produced during the use of biomass. Biomass derives and stores its energy from the sun, which is absorbed by plants through a process known as photosynthesis. Plants contain chemical energy that is passed to animals and then eaten by people. Various plant and animal products, including sugarcane, corn crops, wood chips, and even dung, can be utilised. These substances, also referred to as feedstocks, are converted into a biomass fuel.

5.1 Waste Treatment and Disposal

Source reduction and feeding the hungry are significant considerations for decreasing avoidable food waste. However, non-edible wastes like livestock manure, agricultural wastes, and unusable food wastes are also classified as organic wastes. The environment and general public’s health may be seriously endangered by improper treatment of these wastes. Wastes can contaminate surface and ground waterways by runoff or leaching if they contain pathogens, chemicals, antibiotics, and nutrients. The breakdown of organic waste also results in the production of methane. As is well known, methane is a powerful greenhouse gas that captures more heat into the atmosphere than carbon dioxide. It is possible to remove organic waste and turn it into biogas, a sustainable energy source that can be utilised to reduce greenhouse gas emissions and the likelihood of stream pollution. Further emission reductions are made possible by replacing fossil fuels with biogas, sometimes leading to carbon-negative systems.

Urbanization, industrialization, and economic growth in India have all led to an increase in the generation of municipal solid waste (MSW) by a number of urban local bodies (ULBs). In cities with high population densities, SWM is a significant difficulty. Being a diverse country with a wide range of religious communities, customs, and traditions like India makes it more challenging to accomplish sustainable development in a country that is rapidly industrialising and improving its standard of living. Although there have been substantial changes in the social, economic, and environmental spheres, India’s SWM systems have mostly remained the same. Currently, 90% of residual waste is thrown in the informal sector rather than properly disposed of. To make SWM more sustainable, new management practises and disposal sites are needed. The inefficiency of the current waste management systems has a detrimental effect on the economy, the environment, and public health. The Ministry of Environment and Forests of India introduced regulations for garbage treatment, although there is irregular and insufficient compliance.

Current Status of Seed Production

Organized seed production in India became possible with the formation of National Seed Corporation (NSC) during 1963, which paved the way for a sound seed industry to come as a consequence of the introduction of hybrid technology during 1961-65. The release of high yielding dwarf varieties of wheat and rice by the 1960’s gave further impetus to the growth of the seed industry in the country. For the total area under cultivation of 26.7 m ha and 65 per cent of the area) insect, disease and weeds (10-40 per cent loss) and also poor shelf-life. Hybrid technology have defined solution in several crop plants specially vegetables, cotton, rice etc. with the development of appropriate hybridization and seed production. In 1990-91, the area planted to ‘bought seed’ was about 10.35 per cent. The total ‘bought seed’ was estimated at around 5.91 lakh tonnes valued at Rs 679.80 crores. 

2.1 Rice

Rice is the staple food for the largest number of people on the Earth. According to an estimate, the global rice production must reach 800 million tonne from the present 91.04 million tonne in 2005-06 to meet the demand in 2025. It’s area is 37% of the total area under food grains as against 20% under wheat, another important food crop. But globally it stands next to wheat in harvested area. As the irrigated rice contributes more than 75 per cent of the total rice production, enhancing its yield potential would be key to meeting the global rice requirement for an additional 215 million tonne. To achieve the target yield, rice varieties with a yield advantage of about 20 per cent over popular and widely adapted rice varieties under tropical conditions must be developed. Experience in China, India, Vietnam, Philippines, Bangladesh and several other countries clearly indicates that hybrid rice technology offers readily available option to meet this challenge. 

3.1 Redgram or Pigeon Pea

In any production programme, the importance of quality seed needs hardly be emphasized. In fact, the major bottleneck in the pigeon pea cultivation programme is the restricted or poor availability of quality seeds of the desirable varieties. The seed has been considered as the ‘vehicle of change’. With better attention paid to their interaction among water, fertilizer and seed of improved varieties, the production can be maximized. Although a numbers of improved varieties of pigeon pea have been released since 1970, organized seed production programmes have been rather limited. Most of our national efforts in this direction continue to be centralized on cereal crops like wheat, rice and hybrid millets. Moreover, the benefits of the current research will not reach the farmers unless large-scale seed multiplication programmes are organized.

4.1 Mustard

The principle oil yielding rape seed and mustard sp. cultivated in India are

4.1.1 Land Requirement

Select seed field on which the Brassica sp. was not grown in the previous season unless the crop in the previous season was of the same variety and was grown from certified seed. To avoid disease control it is necessary to fallow a 3-4 year crop rotation so that a given field is selected one in every 3-4 years. In addition select field should be well drained, leveled and suitable for Brassica cultivation.

5.1 Jute Seed Production

Jute ranks secand next to cotton as the most important natural fibre and it recognized as the ‘golden fibre’. Its products being biodegradable and environment friendly in contrast to synthetic substitutes, a renewed interest in this natural fibre has been generated in the recent past throughout the world. Important characteristics of jute fibre are its silky lustures, high tensile strength, low extensibility, considerable heat resistance. Because of its great abundance and shortage of cotton, jute is blended with cotton and jute/cotton blended yarns are produced mainly to take advantage of the lower price of jute fibre (Doraiswamy et al, 1998). Several diversified product is also made from jute. Since currently the paper industry has been using it as a raw material for paper. It is also being used in geotextile. The jute sticks are largely used as fuel and also for making gun powder.

Potato is an important crop of the world and grown in almost all the states in India. Apart from India, potato is grown in more than 100 countries but the intensity of cultivation varies considerably. For example in the Netherlands 19.6% of the total arable land is cultivated with potatoes. The figures for Germany, Peru and USA are 10.1%, 5.6% and less than 1% respectively. India ranks fourth in area (1.29 m ha) and third in production (25.23 m ton) in the world. The productivity of potato depends mainly on the quality and quantity of planting materials and the agronomic management practices adopted. Most of developing countries including India experience release of high yielding varieties, development of adequate agronomic and pest control measures but the gap between supply and demand of good quality adequate quantity seed has to be the major constraint in increasing its productivity. 

Introduction

India’s policy in agriculture sector began in 1950 with a conscious effort to meet out the food needs of Indian population in view of famines but later on shifted to develop the agriculture education and research system for enhancing the productivity of staple crops and develop competent human resource to build skilled man power to strengthen agriculture and solve the problem of food & nutritional security at the nation level (1960,s to 1990,s) to the solution of global problems in agriculture through global solutions (2000,s onward) by forging the regional and global international corporation at different levels.

The closing years of the second decade of 21st century brought one of the most remarkable transitions in the international cooperation for strengthening the agriculture research and education in the history of agriculture in India. In most of the world the transition from a resource-based to a science-based system of agriculture is occurring within a single century.

Science, Technology and Skill Development in 21st Century

In the twenty first century, science and technology are viewed as the drivers of Indian economic growth; and agricultural R&D is expected to play a significant role in the process. Agriculture research and development is being affected by research and development at international level.

Introduction

Women in India constitute nearly half of the population. They contribute 75% to the development of our society as compared to men who only 25%. According to the census 2011, nearly 98 million women in India have agriculture jobs, but around 66.1 million of them are depended on others’ farms as agriculture labours. They are engaged largely in cotton, tea, oil seeds and vegetable production. It is also worth mentioning that from the basic level of work concerning farm related activities to unskilled farm jobs like sowing, transplanting, weeding, harvesting and post harvesting activities like winnowing, processing, storage etc. women are engaged right from the start.

Woman’s contribution to the fisheries sector is 22% according to the FAO. Food security, horticulture, sericulture, livestock production and collection of non- timber forest are some of the allied sectors in which they are involved. They are also involved in other allied sectors which include cattle management, milk and poultry farming, and fodder collection. At the same time, women’s domestic activities include cooking, child rearing water collection from the nearby and far-off places, fuel wood gathering and the overall upkeep of household. Ironically, women face disparities in terms of compensation, their share in properties and in representation in local bodies. Much of their contribution in the food production system as food producers and providers has not received effective recognition. This affects their lives and familial conditions in terms of poor health of children and low educational attainments.