eChapters

1. INTRODUCTION

Green Revolution Technologies (GRT) such as greater use of synthetic agrochemicals like fertilizers and pesticides, adoption of nutrient responsive high yielding varieties, greater exploitation of irrigation potentials etc. have boosted the production output in most cases. However, continuous use of these high energy inputs indiscriminately now leads to decline in production and productivity of various crops as well as deterioration of soil health and environment. The most unfortunate impacts of GRT on Indian Agriculture are imbalance in production, dependency on synthetic chemical fertilizers, increase in secondary and micronutrient deficiencies, increase in pesticide use, unscientific water management and distribution, reduction in productivity, reduction in quality of the produce, extinction of gene pool, environmental pollution and imbalance in social and economic status.

Moreover, today the rural economy is now facing a challenge of over dependence on outside inputs and day-by-day increase in price of these inputs. Further, Indian Agriculture will face the market competition due to globalization of trade as per World Trade Organization (WTO). Thus, apart from quantity, quality will be the important factor. Such varieties of concern and problems of modern Indian Agriculture gave birth to various new concepts of farming such as organic farming, natural farming, biodynamic agriculture, do-nothing agriculture, eco-farming, etc. Therefore, for sustaining the productivity of the crop, maintaining the soil health and healthy ecosystem, there is a need for adoption of an alternative farming system, may be the organic farming.

Organic farming is not new to Indian farming community. Several forms of organic farming are being successfully practiced in diverse climate, particularly in rainfed, tribal, mountain hills and resource poor areas of the country. It safeguards/improves quality of resources and environment. It is labour intensive and provides an opportunity to increase rural employment.

For a product to be called and labelled “organic”, it should have been produced from start (seed) to end (the produces, the consumer is buying) in an organic way. International Federation of Organic Movement (IFOAM) has clearly laid down the condition that in order to get organic certification to the produces, the seed used for sowing should also have been produced organically. To enter into organic agriculture, timely research has been warranted to study the strategies and efficacies of organic seed production to fulfill the global organic seed demand.

Organic seed production system involves use of organic seed quality enhancement treatments, integrated organic nutrient management practices viz., organic manures, green manures and biofertilizers etc., and integrated organic plant protection viz., agronomic practices, crop rotation, growing border/trap crops and use of botanicals, biopesticides and biocontrol agents apart from encouraging natural parasites, predators and parasitoids etc.

Tuberose is an important half-hardy, perennial bulbous flowering plant. It belongs to the Amaryllidaceae family and having basic chromosome number (n=30). It is one of the important cut flower among the top ten cut flowers due to its beauty, elegance and sweet pleasant fragrance (Sadhu and Bose, 1973). It is cultivated for its long lasting spike as cut flower as well as loose flower purpose. Tuberose also known as Rajanigandha in Bengali, Gulchari and Galshabbo in Hindi, Sukandaraji and Nelasanpengi in Telegu, Nilasompangi in Tamil and Sugandharaja in Kannada. It is suitable under protected cultivation as well as open field condition (Brundell and Steenstra 1985). It has a huge economic potential and more demand for cut-flower purpose (Usman, 2013) and essential oil industry (Singh, 1995). Due to its immense export potential, cultivation of tuberose is gaining momentum day by day in our country.

Origin and distribution

Tuberose is cultivated all over the world and it is originated from Mexico. Tuberose is commercially producing in various countries such as India, China, Bangladesh, Mexico, Kenya, Italy, France, Morocco, USA, Hawaii and South Africa. In India, it is commercial growing in West Bengal, Karnataka, Tamil Nadu, Maharashtra, Uttar Pradesh and North Eastern part of India. At present scenery tuberose is cultivation in India 7. 95 lakh hectare and cut flowers is estimated to be 27.71 ‘000 MT and loose flowers1560.70 lakh (Anonymous, 2013).

Introduction

In the era of communication and information, each one of us should have access to information as per our choice, interest, priority, need and requirement. We all are playing different role in different walk of life in different capacity, for different professions, avocations, duties and responsibilities as well. To internalize any concept or idea, a perceptual clarity is very much necessary for interweaving it in our experiential textures. This is possible when more and more number of sensory organs are engaged in a learning situation irrespective of the subject or content to learn. In 21 Century with the advancement of science and technology, more particularly, Information and Communication Technology (ICT), it is possible to establish the connectivity on e-mode and do the things on virtual mode to the possible extent. It is quite possible in urban set up with proper infrastructural facilities both at the source as well as at the receiver end, without any distortion of message on account of electricity failure or wrongful handling of computer or any gadget for that matter.

Introduction

Desert soils are the soils of arid regions that remain dry for most part of the year and support sparse xerophytes. The amount of water received by precipitation is far less than what is lost by evapotranspiration. Most deserts receive an average precipitation of less than 400 mm. Because of extreme imbalance between evapotranspiration and precipitation, many desert soils contain salts.

Distribution

Deserts occupy about one-third of the areas of Africa and Australia, 11% of Asia and about 8% of the Americas (Boul et al. 1997). Desert soils include both cold and hot desert. In India, desert soils occur in three agro-ecological regions (AER). The cold arid desert of extreme north (Leh, Ladakh region of Jammu & Kashmir ), the hot arid desert of north western India (Rajasthan, southern parts of Haryana and Punjab and northern parts of Gujarat) and the tropical arid desert of the Deccan plateau in South India represents AER 1, 2 and 3, respectively. The three different desert regions in India have characteristic climatic and soil conditions.

energy plants need to convert carbon dioxide and water into carbohydrates and oxygen. The carbohydrates produced by photosynthesis are used for vegetative and reproductive growth and to increase crop biomass. The solar energy required for photosynthesis is available during day time. In crop canopies radiation is transmitted through leaves and between leaves resulting in changes of spectral composition rapidly with depth. In the absence of vegetation, solar radiation reaches the earth surface after it gets depleted in the atmosphere due to:
• Reflection of incoming radiation by the cloud tops
• Absorption of ultraviolet radiation by the ozone present in the atmosphere and infrared radiation by the greenhouse gases and water vapour
• Scattering of radiation by the solid particles suspended in the atmosphere
The remaining parts of solar radiation called insolation i.e. incoming solar radiation reach the earth surface. After it is incident on the earth surface, a fraction of the solar radiation gets reflected back into the atmosphere. The difference between the incoming solar radiation and outgoing solar radiation is called net radiation. The net radiation can be calculated using radiation balance which takes into consideration both incoming solar radiation and outgoing solar radiation. The equation for radiation balance can be written as:

Madar, represented mainly by Calotropis gigantea and related species, is a hardy flowering plant adapted to a wide range of environmental conditions, including marginal and dry lands. Its flowers are valued for religious purposes and loose flower use, while different plant parts have traditional medicinal significance. The chapter discusses the origin, distribution, genetics, botanical characteristics and important species of Madar. It emphasizes the crop’s drought tolerance and adaptability to arid and semi-arid conditions. Production practices include seed propagation, land preparation, planting, nutrient management, irrigation and cultural operations. The chapter also addresses pests and diseases, harvesting, special postharvest handling because of latex, yield and commercial opportunities.

Introduction

Computerization in education is perpetual need of today. Computers store large quantum of data that can be retrieved and used wherever necessary. They can also be used as an interactive media in transfer of technology system, which aids farmers and extension workers to access in formation of their need and to communicate with each other. Positive advantages in web education over distance learning process are that farming community can access it from any part of the world. Web education has also the added advantage of updating its data base on weather conditions, market situation in hourly basis which is not possible distance education as the process need a long time with regard to the availability of human resource and static course material to be developed for a particular time frame. The distance learning process being conventional in nature and also in place for quite a long years has abundance of resources and infra structural facilities however in web education, the professional resources are less in number and still arm journalism is yet to gain popularity among them. So web based interactive knowledge network system in transfer of technology is a present need which has to be addressed with due attention to improve the quality of existing communication system.

Introduction

Biomass is a major source of energy in developing countries, particularly in India. Biomass as a fuel used in residential sector of India is a major component of total energy use in India. Type of fuels used in residential sector in India varies with locations and availability of the local fuels and also by way of cooking food in the open fires or in the rural cook stoves (Earthen Chulhas). The majority of the household in the rural sector of the developing countries burns the biomass fuel under traditional open stoves or in advanced closed cook stove (Fullerton et al., 2008). Biomass fuel includes any material of plant or animal origin, which is deliberately burnt by the human being. Approximately, 2 billion people in the developing world use the biomass fuel as the major source of domestic energy (Balakrishnan et al., 2002). Out of residential fuels, 80-90% of the energy requirement in rural India are met with the use of biomass in the form of fuel wood, dung cakes, charcoal and agricultural residue (TEDDY, 2007). Burning of biomass from all these sources is well known to be associated with the emission of smoke/plumes consisting of particulate and gaseous species as these are not energy efficient processes and thus the fuels are not burnt completely. The species emitted and their concentrations depend on the nature of the source of biomass and other factors including the physical parameters associated with the consumption of the biomass. The fate of the initial fire emissions depends strongly on both their composition and the regional state of the atmosphere. Once airborne, the particles begin to grow slightly in size as they age through condensation and coagulation. Despite their high concentrations and widespread distribution in the atmosphere, the sources remain poorly characterized. Biomass burning has drawn global concerns in the past decades for its effects on visibility, human health and global climate by emitting particulate matter (PM) and other gaseous pollutants (Andreae et al., 2005). Biomass burning emits significant global source of PM emissions to the troposphere which leads to deleterious impact on the earth’s atmosphere. It has an impact on the chemical composition of the atmosphere, the formation of photo oxidants and thus on air quality on a regional scale and climate change (Andreae et al., 2005). They also have harmful impact on human health, natural environment and ecological system (Cheng et al., 2000). The various impacts of these emissions have been well studied by Cheng et al. (2000) and Bardouki et al. (2003). Interest in this topic grew when several studies suggested that biomass burning emissions could rival fossil fuel emissions (Crutzen and Andreae, 1990). Biomass burning has received considerable interest (Bowman et al., 2009).

A. Answer the following.

Q.1.     What are tumour specific transplantation antigens (TSTAs) or tumour specific antigens (TSAs) ?
Ans.     Some antigens present on the surface of malignant cells are unique to the cancerous cells and are not present on their normal counterparts. They are called tumour specific transplantation antigens (TSTAs) or tumour specific antigens (TSAs).

Q.2.     What are tumour associated antigens (TAAs) ?
Ans.    Some antigens present on the tumour cells that are not different qualitatively from those found on normal cells but are overexpressed and present in increased number on the cancer cells as products of cellular oncogenes. They are called tumour associated antigens (TAAs). Ex the high level of a growth factor receptor due

Introduction

Agriculture is the mainstay of livelihood activity of about 70% of the state’s population. Madhya Pradesh is an agrarian state and the state’s economy is highly dependent on agriculture. Considering the sector’s sensitivity to climatic parameters it can be easily understood that the sector would be highly impacted by any change in these parameters.

Madhya Pradesh has a subtropical climate with three distinct seasons’ viz. winter from December to February, followed by summer season from March to May and rainy season extending from June to October. During winters the mean temperature remains around 10ºC and mean maximum temperature remains 25ºC and the minimum temperature goes down to 1°C in some regions. During summers, the mean minimum temperature is 22ºC and mean maximum is 38ºC. The maximum temperature during summer can go up to 48ºC, especially in May and June which are the hottest months.

14.1 INTRODUCTION

Drumstick is one of the most popular perennial tree vegetables in the south Indian households and known as miracle tree. This perennial vegetable survives for several years and goes on yielding vegetables without much care and attention, and is planted on the side of the kitchen garden without much interference with tillage operations of other annual crops. The fruits, leaves and flowers are used in culinary preparation. Immature fruits are cut into pieces and used in several culinary dishes. Fruits are rich in Vitamin C, carotene, Phosphorus and minerals like Mg, K, S, Cl etc. Tender leaves and flowers are comparable to that of Colocasia in vitamins and minerals. Drumstick leaves contain high amount of vitamin A (four times more than carrot), vitamin C (seven times more than orange), protein (5-10%), calcium (four times more than milk) and potassium (three times more than banana).The roots of the plant are used for seasoning pickles. Its roots are a good substitute for Horse Radish so called as Horse radish tree. It is highly valued for the distinct and appealing flavour for its tender fruits. They are rich source of protein, minerals and vitamins. Seeds contain an oil called ben or behen oil which has been much used for illumination, soap industry and highly priced for lubricating watches, computers, delicate machinery and so known as Ben oil tree. Seeds contain 38-40% of non-drying oil which is clear and odourless, that never becoming rancid. The oil contains high levels of unsaturated fatty acids, especially oleic acid up to 67.8%. It is edible and useful in the manufacture of perfumes and hair dressing. The press cake remaining after oil extraction is high in saponin, not edible, but utilized as manure. The oil cake is a water coagulant and used for purifying effluent water. It is used as organic substitute for water purifying chemicals such as aluminium sulphate. Wood yields blue dye and coarse fibre. The plant is used for treatment of rheumatism and as cardiac and circulating system stimulants. It has fragile and cory stem. The trunk is gaining importance as a raw material for paper making. The gum of stem has medicinal properties. The leaves are usually tri-pinnate with elliptic leaflets. Seeds are trigonous with wings on angles. Flowers are produced on current seasons growth on large and erect panicles or monocladial cymes. Flowers are yellowish creamy white and sweet smelling. It is a cross-pollinated crop. Pollinator is carpenter bees, bumble bee, honey bee and flee beetle. Flowering mostly varies from place to place and is greatly influenced by rain, temperature, humidity, wind, soil moisture and soil temperature etc. Peak period of flowering in central parts of India and Kerala is December-January while in southern part it is February-March and July-August with maximum flowering in February-March. Fruits take 60 days for horticultural maturity during rainy season while 30 days in summer.

2. METHODS OF HARVEST

The seed can be harvested either manually or mechanically. In mechanical harvesting, single harvest is possible, but care should be taken to avoid mechanical injury. In manual harvesting, crops can be harvested either as single harvest or as periodical harvest. The crops having continuous flowering habit are to be harvested in different harvests/ pickings.

2.1. Manual harvesting

Harvesting any crop can be done manually. Manual harvesting is done by the hand of harvest worker. Multipicking in pulses and vegetables is done by manual methods.

Chemically, sugar candies are broadly divided into two groups: crystalline candies and amorphous or non crystallized candies. Crystalline candies are not as hard as crystals of the mineral variety, but derive their name and their texture from their microscopically organized sugar structure, formed through a process of crystallization, which makes them easy to bite or cut into. Fudge, creams, and fondant are examples of crystalline candies. Amorphous candies have a disorganized crystalline structure. They usually have higher sugar concentrations, and the texture may be chewy, hard, or brittle. Hard candies, such as lollipops, caramels, nut brittles and toffees are all examples of amorphous candies, even though some of them are as hard as rocks and resemble crystals in their overall appearance. Crystalline candies are chemically described as having two phases, because the tiny, solid sugar crystals are suspended in a thick liquid solution. These are also called grained candies, because they can have a grainy texture. Amorphous candies are have only one phase, which is either solid or liquid, and do not have a grainy texture, so they may be called ungrained.

Commercially, candies are often divided into three groups, according to the amount of sugar they contain:

With the advent of clustered regularly interspaced short palindromic repeat (CRISPR)-associated protein9 (CRISPR/Cas9) genome editing, a fast and efficient new breeding technology, precision breeding in vegetable crops has become possible now. Several genes have been edited and functionally characterized using CRISPR/Cas9 in tomato for multiple traits such as plant type, floral morphology, fruit traits, disease resistance, and abiotic stress tolerance. The CRISPR/Cas9 has been proven in successful introgression of de novo domestication of elite traits from wild relatives to cultivated tomato. The progress in CRISPR/Cas9 based improvement in vegetable improvement, has been discussed.
Vegetables are an important source of healthy diet, as they provide essential nutrients including vitamins, minerals, dietary fibre, antioxidants and other phytochemicals. Dietary fiber-rich vegetables improve digestion, while also lowering the risk of obesity, diabetes, high cholesterol and heart disease (Behera et al., 2021). A world vegetable survey showed that around 392 vegetable crops are cultivated worldwide, representing 70 families and 225 genera. Over 97 species of higher plants are being cultivated and consumed as vegetables in India. These crops belong to 20 different families such as Cucurbitaceae (25 crops), Fabaceae (16 crops), Brassicaceae (12 crop) and Solanaceae (6 crops). The world’s total vegetables production was 1,155 million tonnes in 2021 where China ranks first with a total production of 600 million tonnes, accounting for 52.18% of the total world production. The top 5 countries (China, India, the United States of America, Turkey and Vietnam) account for 70.36% of total world’s production. As far as India is concerned,  it is the largest producer of ginger (2.23 million tonnes) and okra (6.47 million tonnes) in the world, while ranking 2nd in potato (54.23 million tonnes), dry onion (26.64 million tonnes), cauliflower and broccoli (9.25 million tonnes), brinjal (12.87 million tonnes) and cabbage (9.56 million tonnes) (FAO 2023).

Introduction

SWOC analysis is a strategic planning method used to evaluate the Strengths, Weaknesses, Opportunities, and Challenges involved in a project or in a business venture. It involves specifying the objective of the business venture or project and identifying the internal and external factors that are favorable and unfavorable to achieve that objective. A SWOC analysis must first start with defining a desired end state or objective. A SWOC analysis may be incorporated into the strategic planning model.

• Strengths: characteristics of the business or team that give it an advantage over others in the industry.

• Weaknesses: are characteristics that place the firm at a disadvantage relative to others.

• Opportunities: external chances to make greater sales or profits in the environment.

• Challenges: external elements in the environment that could cause trouble for the business.

Evapotranspiration (ET) is the combined loss of water from vegetation and soil. When water is not a limiting factor at a site, the rate of ET is primarily controlled by meteorological factors like solar radiation, temperature, wind and relative humidity. The measurement of ET under natural conditions is of great importance in the water resource management and irrigation planning. Potential evapo-transpiration (PET) is the evaporation from a surface if water was never a limiting factor. PE-can also be calculated using empirical formulae.

Importance and Value of Human Resources

The employees are the human resources of an organization which are crucial for its functioning. The acquisition of human resources and their maintenance involves costs. Manpower costs include costs of research and designing of manpower programmes that is man-power planning, work study and designing of personnel policies etc. The costs of commissioning of man power, that is, costs of recruitment, induction, placement and training etc. The cost of maintenance of these resources is a very significant component of the total costs of an organization. Maintenance costs include wages and salaries, welfare and medical benefits, PF, gratuity and other retiring benefits etc. These costs form a substantial part of the total costs of an organization. In the last 30 years the treatment of manpower costs has been recognized as a separate division in accounting practices. The other assets like machinery, buildings etc come under depreciation. In contrast, human assets are the employees at all levels, as they grow in age and experience, add to their productivity and capacity to earn for the organization and become more valuable.

1. Introduction

Among three major functions identification, classification and nomenclature of taxonomy (Fig. 1), identification is a core activity and one of the major objectives of taxonomy, which determines whether other two elements are the same or different. Classification and nomenclature are two separate methods in taxonomy, however, both are totally dependent on the correct identification of the objects. The identification of an unidentified plant with a correctly identified specimen also involves classification. So, both identification and classification, involve comparison and judgment of similarities and differences. Therefore, the identification is a primary function in classification involving nomenclature which performs an essential role as a means of communication. According to Blackwelder (1967) “identification enables us to retrieve the appropriate facts from the system (classification) to be associated with some specimen at hand” and is “better described as the recovery side of taxonomy.” The identification of plants is very important for proper assessment and characterization of biodiversity on which the whole life of human beings is dependent starting from birth to death. The use of biodiversity for various purposes like food, nutrition, pharmacognosy etc. requires accurate and reliable identification and naming of plants (Nesbitt et al. 2010).

ABSTRACT

The hearing impaired Persons constitute a very small percentage of the total population. The article presents the information regarding the infrastructure, the library services to the special group of library users. All the public/academic libraries do not provide services to these groups of the users, hence the institutions specially meant for these persons are responsible for administering services to this group of users. Assistive technology can help to a great extent in providing library services to these groups of users.

Keywords: Physically challenged persons, Hearing impaired library users, Library infrastructure, Library services, Information Technology, Assistive devices.

BNHS is one of the oldest scientific organizations in India, working for nature conservation since 1883. Our primary goal is to spread awareness about nature through science-based research, conservation advocacy, education, scientific publications, nature tours, and other programs.