eChapters

Advancements on sugar processing

India has popped out as one of the largest sugar processing country throughout the world. Through the collaboration of research and development carried out in the field of sugar processing, this industry has witnessed the vast changes in term of technology. Important considerations such as productivity improvement and cost reduction were the main objectives in the field of sugar processing. Sulphur dioxide was earlier used but afterwards lime treatment in clarified juice helped in the processing of white sugar from sugar cane. Since then the continuous progress and improvement has been made and advanced techniques are introduced for manufacturing of sugar with modern tools.

Ramjeawon (2004) reported that farmers and agriculture workers grow sugar cane and beet root for sugar production,providing about 20 kg per capita and that is equivalent to almost 13 percent energy requirement. Fechter et al. (2001) reported that production of the white sugar was focused more on juices rather than molasses which were taken as the raw material. Various processes such as ultra-filtration, de-mineralization and de-colorization were used for the production of white sugar. The traditional refining process wascheaper, and effective in terms of purification and juice purification was the method used for the processing of white sugar directly from the sugar cane. Crystallization was one of the process which is used for increasing the recovery of sucrose and it reduces the molasses production. Chromatography was used in the sugar industry for the separation of sucrose. Another method was ion exchange demineralization which was used in the sugar industry for the removal of minerals from the liquid sugar. Later adsorption has been incorporated to be used de-odorization and de-pigmentation. Membrane filtration is latest technique used in the process which was used for maintaining the quality of white sugar by removing unwanted particle from the juice. Velásquez et al.,(2018) reported that thermal processes are also used for the production of sugar from sugar cane. Non centrifugal cane sugar processing is used for this purpose and the product is obtained by evaporating the sugarcane which has the unique flavor and aroma. Later the product is used as the sweetener and has a traditional characteristics flavor and optimum nutrition.

Introduction

Probiotics, prebiotics and synbiotics are interrelated terms. Probiotic is discussed in detail in previous chapter. In this chapter, prebiotics and its effect on gut along with probiotics are emphasized. Prebiotics can be defined as non digestible food ingredients that stimulate the growth and/or activity of bacteria in the digestive system in ways claimed to be beneficial to health. They were f irst identified and named by Marcel Roberfroid in 1995. He defined prebiotic as a selectively fermented ingredient that allows specific changes, both in the composition and/or activity in the gastrointestinal microflora that confers benefits upon host well-being and health. Further, FAO defined prebiotic as “a non-viable food component that confers a health benefit on the host associated with modulation of the microbiota.”Whereas the term synbiotics refers to a product that contains both probiotics and prebiotics in the form of synergism. A synbiotic has been defined as “a mixture of prebiotics and probiotics that beneficially affect the host by improving the survival and implantation of live microbial dietary supplements in the gastrointestinal tract, by selectively stimulating the growth and activating the metabolism of one or a limited number of health promoting bacteria, and thus improving host welfare”. As described above, the combined use of prebiotics and probiotics is often described as synbiotic, but the United Nations Food & Agriculture Organization (FAO) recommends that the term “synbiotic” be used only if the net health benefit is synergistic.

11.1 Total DNA Extraction by cTAB Method
    
11.2 Extraction, Purification Estimation of DNA
    
11.3 Potassium Acetate Procedure
    
11.4 DNA  Estimation
    
11.5 Restriction Enzymes

Introduction

It is common that after a rocket start, entrepreneur’s lack the motivation to scale up business and eventually fails to succeed in the market. There are many factors that may lead to such failures or even success stories, the most important being the entrepreneurial skills and traits that enable business to sustain in the competitive world.

What makes an entrepreneur competent in running a business? According to Fisher and Koch (2008), ‘Entrepreneurs are born; the advantage that they derive by birth being the natural advantage. However, we have changed our mindset now-a-days, that it is possible to nurture (make) an entrepreneur; the connotation points out that, right kind of education and training can inspire people with capacities to become motivated to be an entrepreneur.

In this chapter, our focus will be on identifying the entrepreneurial capacities in oneself, after reviewing the essential characteristics and traits that an entrepreneur should possess. Also we try to put forward a framework for entrepreneurship, fitting into the canvas of a food based entrepreneur.

Landscaping combines elements of art and science to create a functional, aesthetically pleasing extension of indoor living to the outdoors. One initial purpose of landscape design is to blend mans’ technology (house or building) into the natural surroundings. To work towards a desirable landscape design, the landscape horticulturist must have a working knowledge of art elements and design principles.

The “art” is always changing as the plants grow, environmental conditions change and people use the space. For this reason, landscape designers use a design process that systematically considers all aspects of the land, the environment, the growing plants, and needs of user to ensure a visually pleasing, functional, and ecologically healthy design. The design process begins by determining the needs and desires of the user and the conditions of the site. With this information, the designer then organizes the plants and hardscape materials, which are collectively referred to as the features. The features can be physically described by the visual qualities of line, form, color, texture and visual weight—the elements of design. The principles are the fundamental concepts of composition—proportion, order, repetition and unity—that serve as guidelines to arrange or organize the features to create an aesthetically pleasing or beautiful landscape. Knowledge of the elements and principles of design are essential to designing a landscape and working through the design process.

ABSTRACT

Tree component of agroforestry systems produce large biomass of varying nutrient concentration to serve as alternative to inorganic fertilizers under integrated nutrient management or organic farming. Additionally, agroforestry systems proved effective in conserving soil and rainfall and brought down soil loss up to 0.2 t ha^-1 and runoff up to 1.8 per cent of rainfall. Introduction of grasses in aonla conserved up to 31 cm of rainwater, 28 q ha^-1 of soil, 11 kg ha^-1 of N and 2 kg ha^-1 of K₂O. Conservation coupled with ameliorative capacity of agroforestry systems helped in building organic carbon and nutrients and improving soil physical, chemical and biological properties.

Introduction

Access to adequate food, which is one of the fore-most basic needs of life, should be birthright of every single human being on this earth but in our country one fourth population is still underfed. The food insecurity situation is more rampant in the North-eastern region of the country. The proportion of population below poverty line (BPL) was reported at 31.4 per cent in Arunachal Pradesh, 34.0 per cent in Assam, 37.9 per cent in Manipur, 16.10 per cent in Meghalaya, 15.4 per cent in Mizoram, 8.8 per cent in Nagaland and 40.0 per cent in Tripura, in the year 2015 (RBI, 2015). At national lavel it was reported to be 37.20 per cent. By comparing BPL population in NE Region states and national level poverty it was found that several states of this region like Nagaland, Mizoram and Meghalaya were far better as in these states BPL percentage were very less than the national average, whereas in the states like Tripura, Manipur, Assam and Arunachal Pradesh BPL percentages were close to National level (37.20%). It has now been well established fact that the availability of food grains may not be the real problem of food security; it is prevailing poverty that comes in the way of achieving household’s food security. Hence, household food security is a function not only availability of food but also of the purchasing power of household. Any effort to achieve sustainable development demands concerted efforts to reduce poverty, including finding the solutions to hunger and malnutrition. In this study, an attempt has been made to analyze the status of food deprivation among fish farmers of West Tripura district of Tripura and to examine consumption expenditure behavior fish farming families of the study area.

Varietal release and notification comes under the purview of the Seeds Act which aims to provide for regulating the quality of certain notified seeds for sale and for marketing and for the matters connected therewith. Released and notified varieties are offered for seed certification by the seed certification agencies which ensure that the varieties under certification meet certain prescribed field and seed standards failing which they stand to be rejected during the process of seed certification.

The term ‘geo’ is a Greek word, it means the earth, and the term ‘spatial’ means parameter/feature measured, mapped or modeled with reference to distance or space. The geospatial technology refers to the technology that measure, model, analyze, map, or predict the features or phenomena that occur on earth and its surface.

Introduction

Abiotic stresses adversely affect growth, productivity and trigger a series of morphological, physiological, biochemical and molecular changes in plants. Cold stress is a major environmental factor that limits the agricultural productivity of plants in hilly areas. Plants respond and adapt to this stress to survive under stress conditions at the molecular and cellular levels as well as at the physiological and biochemical levels. However, expression of a variety of genes is induced by different stresses in diverse plants.

Acetic acid            
    

Molecular weight    60.05        
    Melting point (^ºC)    17        
    Boiling point (^ºC)    118        
    Flash point (^ºC)    40        
    Auto-ignition point (^ºC)    426        
    Specific gravity at 20^ºC    1.05        
    Molarity of the concentrated acid (M)    17.4    
    1 M solution    57.5 ml concentrated acid per litre

With few species-specific differences in analyte ranges, clinical chemistry instruments originally developed for human and veterinary use are readily adapted for use in fish specimens. However, the development of hematological methods for fish continues to face challenges similar to those encountered during the early applications of complete blood count (CBC) techniques in birds and reptiles. Like their non-mammalian terrestrial counterparts, fish possess nucleated erythrocytes, and several leukocytes—such as thrombocytes, monocytes, lymphocytes, and basophils—exhibit similar morphology when stained with Romanowsky-type stains.
Blood collection and hematological testing are essential techniques in fish pathogen detection and overall health monitoring within India’s aquaculture systems. These approaches help assess physiological responses to infectious agents, environmental stress, and farming practices. Given the wide variety of cultured species—from carps in West Bengal and Andhra Pradesh to catfish in Tamil Nadu and ornamental fish in Kerala—blood-based diagnostics serve as a non-lethal, rapid, and informative method for health evaluation.
Blood is commonly drawn from the caudal vein or heart using sterile syringes, with or without anticoagulants such as EDTA, depending on the intended analysis. In field conditions, particularly in rural hatcheries and pond systems, affordable options like glass capillaries or insulin syringes are frequently employed. For small-sized species such as Danio or ornamental fish, heparinized capillary tubes are used to reduce clotting during blood collection. Fish are typically anaesthetized using clove oil or MS-222—both widely accessible in Indian laboratories—to minimize stress during handling.

With the invention of bitcoin in 2008, the world was exposed to a new technology paradigm called blockchain. Blockchain was conceptualized by an unknown person named as Satoshi Nakamoto in 2008. The identity of Satoshi Nakamoto is still not known. Nakamoto proposed the design of blockchain which uses digital signature and timestamps to enable secure and trusted online transaction without the need of any trusted regulatory or third party.

Introduction

At a present time, Organic farming has an important priority in different areas due to worldwide in look of the growing need for pure and nutritious agriculture food and keep up the feasible and environmental pollution on long time associated with indiscriminate use of chemical fertilizer. The use of synthetic inputs in crop cultivation is necessary to meet the growing need for agriculture food in world. The natural fertilizers are made containing living or veiled cells or their strains of N2 fixation, P2 O5 solubilization bacteria. The biofertilizers are used for seed cramming, soil or vermicomposting region with the objective of rising quantity of such microbes and further those microbial processes which augment the obtainability of nutrients that can be easily digest by plants. Biofertilizers are playing higher role in increase soil productivity by f ixing atmospheric nitrogen, both, in relationship with plant roots and without it, solubilise and insoluble soil phosphorus and produces many plant growth substances in the soil.

INTRODUCTION

Indigenous Technical Knowledge (ITK) represents the treasure trove of wisdom held by indigenous communities, often overlooked yet immensely valuable. Its impact spans various domains, notably aquaculture, where it has been pivotal. Local fisher communities, drawing from their indigenous knowledge, have been crucial in safeguarding wild fish genetics and improving aquaculture yields. Moreover, their Indigenous and local knowledge (ILK) contributes multifaceted insights to fisheries and aquatic ecosystems science, underscoring the need to preserve and honor this invaluable heritage. Additionally, traditional indigenous systems like aub-anbars have historically demonstrated their effectiveness in practical applications such as passive cooling and water storage, further highlighting the relevance and efficacy of ITK.

Importance of ITK in Aquaculture

Indigenous Technical Knowledge (ITK) is essential in aquaculture, providing valuable methods for pond preparation, water quality management, disease control, and post-harvest operations. These traditional practices, backed by scientific validation, can greatly improve fish production sustainability while being environmentally friendly. Moreover, modern biotechnological tools are increasingly used in aquaculture to enhance fish quality, disease resistance, growth rates, and genetic diversity. Additionally, the concept of intelligent fish farms, employing technologies like IoT and artificial intelligence, aims to optimize aquaculture processes for precise feeding, disease control, and harvesting, promoting green and sustainable practices. Combining ITK with modern biotechnology and intelligent technologies is crucial for advancing aquaculture practices towards efficiency, sustainability, and increased productivity.

This chapter introduces artificial intelligence, machine learning, computer vision and spectroscopy for rapid, automated and non-destructive egg-quality assessment. It covers machine-vision fundamentals, image acquisition and preprocessing, feature extraction, machine-learning models, deep learning, convolutional neural networks, hyperspectral methods and defect detection. Applications include crack detection, freshness prediction and internal-quality assessment. The chapter also examines model validation, transfer learning, sensor integration, commercial grading-line requirements and the practical limitations of deploying AI systems at industrial scale.

Introduction

Remarkable increase in fruit and vegetable crops cultivation under arid region of western India lead to drastic changes in the pest population dynamics. The productivity is concern, it is low because of harsh environment (high temperature, low precipitation, high PET, high wind velocity), poor soil fertility and salinity. Beside these, the biotic pressure like pests and diseases also play a critical role, which cause significant loss and adds to the cost of production.

A disease is characterized by the sum total of symptoms as expressed by the host plant and the signs of the pathogen involved. As stated earlier, it is the core part of disease diagnosis because in every diseased plant there are some symptoms/signs of the problem regardless of the ease in their visibility. Even in latent infections there are certain clues or at least presence of the pathogen inside the host serves as sign of the pathogen. However, the term, ‘disease’ itself refers to an uncomfortable situation of the concerned host. It reflects in the form of reduction in the vitality and performance of the host to varying degrees depending on the quality and quantity of the factors involved in production of the disease. Study of the characteristics of disease is, therefore, important for its quick and accurate identification.

Abstract

Classification of the hundreds of possible dryers is essential to the logical selection of appropriate dryer for a given application. Diverse criteria for classification as well as selection of dryers are presented and discussed briefly. The advantages and limitations of different dryer types must be taken into consideration. Initial capital cost is often the key deciding criterion in industrial dryer selection. This is not a good strategy as the user must pay for the operating costs over a long period of life of the dryer. In general several different dryer types are suitable for a given product. Careful selection is essential for cost-effective operation of the dryer.

Abstract

The disease is an output of the interaction among host, pathogen, and the environment over a period of time. Given that a susceptible host and an aggressive pathogen are available, weather determines the intensity of the disease over time. To capture the dynamics of the interactions among these biophysical variables, efforts have been made in the past to understand the variables per se and their interactions through modeling approaches.  The important weather parameters are temperature; rainfall/dew; leaf wetness period, wind, bright sunshine hours all of which are in turn influenced by soil properties. The important parameters of host that can influence disease development are susceptibility; growth stage and form; structure and density of the plant population and overall health. For pathogen, to cause disease, it should be present in the vicinity, pathogenic, adaptable with reproductive fitness and possess efficiency of survival and dispersal.