eChapters

Safety is a prime concern for humans and animals. Without evaluating the safety of a chemical, no regulatory authority in the world allows the chemical to be used by humans. There are stipulated guidelines for toxicity evaluations. Among the toxicity assays genotoxicity assays are important and have occupied centre stage due to increase in understanding of the genome.

Genotoxicity describes the property of chemical agents to damage the genetic information within a cell to cause mutations, which may even lead to cancer. While genotoxicity is often confused with mutagenicity, all mutagens are genotoxic; however, not all genotoxic substances are mutagenic. Generally and depending on the agent, a cytotoxic agent may be genotoxic (causing DNA damage), mutagenic (causing gene mutation) or it may be harmful for cell organelles (e.g. cell membrane) or it may even be teratogenic. Therefore, every cytotoxic agent is not genotoxic.

Why we Need to Evaluate Genotoxicity?

Toxicity can be at any level according to the nature of chemicals and type of exposure. Duration of toxicity can also be short lived or long lived within a generation or continue to next generation. Genotoxicity effects are able to continue in next generation(s), in which the exposed population may not suffer seriously but the next generation may suffer without being exposed to the same chemicals. Therefore, genotoxicity evaluations need serious attention.

The biological diversity of each country is a valuable and vulnerable natural resource. Sampling, identifying, and studying biological specimens are among the first steps toward protecting and benefiting from biodiversity. Knowledge about biodiversity and the ability to identify organisms that comes with it are global public goods. That is, this knowledge can create benefits for all countries - benefits that no one country can create by itself.

DNA Barcoding: Documenting Biodiversity with a Gene Sequence

“DNA barcoding” is an exciting new tool for taxonomic research. The DNA barcode is a very short, standardized DNA sequence in a well-known gene. It provides a way to identify the species to which a plant, animal or fungus belongs. The Consortium for the Barcode of Life (CBOL) is promoting international partnerships that will enable people in all countries to better understand and protect their biodiversity.

DNA barcoding is a taxonomic method that uses a short genetic marker in an organism’s mitochondrial DNA to identify it as belonging to a particular species. It is based on a relatively simple concept: most eukaryote cells contain mitochondria and mitochondrial DNA (mtDNA) has a relatively fast mutation rate, which results in significant variance in mtDNA sequences between species and, in principle, a comparatively small variance within species.

Abstract

Fungal rot and wilt caused by Sclerotinia sclerotiorum is a devastating disease of vegetables causing huge loss. The fungus has a broad host of more than 400 species including diverse vegetable crops, viz., carrot, potato, tomato, green pepper, eggplant, lettuce, peas and beans, cole crops, bottle gourd, pointed gourd, etc. Being able to overwinter in the soil in form of sclerotia upto 5 years and having such a wide host range, management of the disease becomes very difficult. Thus development of resistant varieties can be the only long term strategy for control of the pathogen. The screening of the existing genotypes and identification of resistant genotypes forms the base of any resistant breeding programme. The widely available genotypes of different crops have been screened by several researchers and resistant genotypes have been identified in cauliflower, vegetable soybean, peas, tomato, etc. These genotypes are further used in breeding programmes for as donors for resistance to Sclerotinia sclerotiorum.

Keywords: Vegetables, Sclerotinia, Resistance breeding, Genotypic screening

Abstract

Genus Artemisia L. (Asteraceae) has a long history of use in herbal medicine, owing to the presence of rich bioactive phytochemical diversity of it constituent species. Himalaya is hub of several species and species under this genus have been traditionally used in different ways for curing ailments by inhabitants of the areas where their populations sprawl. Few species such as A. annua and A. maritima are cultivated for their use in medicine. In addition, the species of the genus have found wide usage in matters connected to digestive system especially for treatment of worms and for preparation of herbal teas. Artemisnin, a potent source of anti-malarial drug extracted from some species, is most valuable bioactive phytochemical of this genus. Other important chemical constituents include santonin and scoparine. Reported studies suggest that the bioactive constituents present in this genus shows several biological activities such as antimicrobial, anti-inflammatory, anticancerous and other allied ones activities. Expansion of range and acclimatization in new habitats is exemplary in this genus. Present work reports the ways of range expansion, economic importance, conservation strategies and future prospects of this genus.

Abstract

The balance between resources and population constitute the solid base for drawing the future map of sustainable development in the study area in all developmental sectors such as agriculture, industry, tourism, and commercial sectors. Geoenvironmental hazards such as erosion, sea level changes, sand dune encroachment, siltation of the navigation channel of the Damietta harbor, salinization of the soils, the negative effects of the protective structures and bad management of the coastal areas must be studied in details before making the future planning for any area. The main geomorphologic units in this area are: beaches, sand dunes, wetlands, urban areas, reclamation lands and lagoons.

The rate of erosion from 1984 to 2000 in the Rosetta beach is -117.6 m/yr, while it is -17.6 m/yr in the Damietta beach. On the other hand, the rate of erosion in the period from 1984 to 2005 is -104.6 m/yr and -11.4 m/yr in Rosetta and Damietta beaches, respectively. Since, Nile Delta is a typical wave dominated delta (Coleman et al., 1981) and Tide is a semi-diurnal microtidal regime with a maximum tidal range of 50 cm (UNESCO/UNDP, 1978), the erosion and accretion are very dangerous hazard in the area.

Due to the reclamation of vast areas of the coastal dunes, the lagoons and wetlands, the new reclaimed lands are added to the agricultural deltaic land. Thus, the coastal sand dunes, lagoons and wetlands are decreased. The main urban centers have expanded, and new urban centers (Damietta harbor, the New Damietta city and Mansoura city in near future) have been constructed at the expense of vast areas of lagoons, coastal dunes, and backshore flats. The siltation of the navigation canal of the Damietta harbor, salting of the soil (new and old) and sand dune encroachment are very important hazards in the study area. All the previous geoenvironmental hazards and others threaten the sustainable development in the study area.

The agriculture sector faces significant challenges in mitigating the detrimental impacts of pests and diseases on crop yield and quality. Traditional methods of pest and disease management often fall short in providing timely and precise interventions, leading to substantial economic losses and environmental consequences. In recent years, the integration of geo-spatial technology has emerged as a promising approach to address these challenges by enabling more accurate monitoring, prediction, and management of pests and diseases.

The integration of geo-spatial technology in pest and disease management within agricultural practices represents a significant stride towards precision agriculture. This chapter delves into the innovative application of geospatial tools in identifying, monitoring, and mitigating pests and diseases, thereby optimizing crop yield and quality while minimizing environmental impact. Beginning with an overview of the challenges posed by pests and diseases in agriculture, the chapter highlights the limitations of traditional methods in effectively addressing these issues. It then explores how geo- spatial technology, encompassing Geographic Information Systems (GIS), remote sensing, and global positioning systems (GPS), revolutionizes pest and disease management by providing real-time, spatially explicit data. The discussion extends to the utilization of satellite imagery and aerial drones for early detection and monitoring of pest infestations and disease outbreaks. Through case studies and examples, the efficacy of geo-spatial technology in mapping pest distribution patterns, predicting outbreaks, and implementing targeted interventions is elucidated.

ABSTRACT

Groundwater geochemistry is largely a function of mineral composition of aquifer through which water flows thus, differences in aquifer composition are reflected as differences in groundwater chemistry. To understand water quality and flow pattern multivariate statistical analysis are used due to its relative importance in combining chemical variables and organize voluminous data and group into variables of similar characters. R-mode factor analysis is used in the field of hydrogeochemistry to interpret complex hydrogeological process. A total of 216 samples representing complete lithology like peninsular gneiss, Charnockite and calc gneiss for four different seasons was collected and analyzed for major ions like Ca, Mg, Na, K, HCO₃, Cl, SO₄, NO₃, PO₄, F and H₄SiO₄. Correlation analysis reveals Mg, Cl and Na are spinal and others seasonal. Factor analysis indicates ascendancy of anthropogenic basis followed by lithological weight. Factor score superimpose indicate governing hydrogeochemical regimes spread in western and eastern part. In southern part the same has superior influence than northern part.

Abstract

Water has become a scarce resource all over the World. Water resources of Earth can be classified as surface water and groundwater in which groundwater is the main source for the drinking, domestic and agriculture. The Pudukkottai district is one of the chronic drought prone areas in Tamil Nadu. But, at the same time, the district is pitted with over 5,400 tanks/water bodies widely distributed throughout in general and clustered more in Vellar delta in particular, as the interlobel depressions have provided basic depressions for the surface water to accumulate. However, these surface water bodies are heavily silted. In Pudukkottai district, there are three divergent aquifer systems, hard rock aquifer system in the western, sedimentary aquifer system constituted by the Tertiary Sandstone (Cuddalore Sandstone) in the central and Quaternary aquifer system constituted by fluvial, fluvio-marine and marine systems in the eastern parts of the district.

Abstract

The Sonapur landslide located in the south eastern fringe of Shillong Plateau falls in NH44 connecting Shillong with Agartala. The slide is repeatedly active and massive debris flows occur during every monsoonic season since 1999. The studies carried out under the NRDMS funded project shows that the slide falls in the tectonically active E-W Dauki fault system, which not only forms the southern boundary of the Shillong plateau but also the near vertical plane along which the Shillong plateau has been uplifted due to the northerly compressive force and the collision of Indian plate with Eurasian plate. Such post collision tectonic uplift and the southerly tilt of the Shillong plateau in its southern part, monoclinal southerly dipping sediments south of Dauki fault, Sylhet trough, occurrence of NE-SW sinistral (shears) and NW-SE dextral faults in Sonapur area, high seismic activity and rainfall are responsible for the Sonapur Landslide.

Abstract

Geological conditions in the Tertiary mountainous areas of the western and eastern hill ranges of Manipur often cause landslide movements. These repeatedly occur mostly in old landslide regions during rainy seasons on a large scale, causing considerable economic loss and injuries and deaths of humans. In order to improve such landslide hazard assessment of the region for effective mitigation, Electrical resistivity surveys were conducted using Schlumberger array technique on the very unstable and problematic frontal part of the Kotland landslide, NH-37, Manipur along three profiles. Electrical resistivities aided the characterization and quantification of the subsurface rock units, structure and tectonic conditions of the Landslided area which can contribute for the better planning of mitigation strategies. The results lead to the elucidation of depth of the different litho-units and the geometry of failure surface. The probable failure surface was observed between 10 and 22m depth, characterised by low resistivity (< 150 Ωm) and geometry of the sliding surface was rotational. In addition, a fault was also inferred in the resistivity pseudosection model and hence the area may be highly vulnerable to landslides.

ABSTRACT

The present paper discusses about the Geoelectrical response over Charnockite rocks and Biotite Gneiss rock types of Sankaran kovil and Tenkasi Taluks of Tirunelveli District, Tamilnadu. The study area is adjoined to the Western Ghats which geologically comprises Archean crystalline hard rocks. In this attempt, about 7 Vertical Electrical Soundings (3 in Gneiss and 4 in Charnockite) have been carried out in both terrains. The VES values were interpreted with Schlumberger Sounding Dada Processing and Interpretation Program .The resistivity values varied from 68 m to 808 m with the layer thickness of 10m, 20 m and 29m in the biotite gneiss terrain. Similarly, the resistivity values varied from 48 m to 444 m with the layer thickness of 4m, 6m, 9m,18m & 29m in the charnockite terrain. But the depth to massive rock for both the rock types has been observed below 29m. In this study, a difference in resistivity with high resistivity values in gneissic terrain and lower values in charnockite terrain have been observed. The observed resistivity differences are mainly due to the presence of resisting minerals such as biotite and hornblende. Besides, other factors like weathering and water table also influence the resistivity values. Hence, it is summerised that the geoelectric methods are the best methods to understand the subsurface lithostudies.

Introduction to GIS

QGIS (Quantum GIS) is an open-source Geographic Information System (GIS) software has been used to showcase various exercises pertaining to viewing, editing, analyzing, and printing of the geospatial data. QGIS helps to allow the users to easily access and manage geographic data stored in folders on local disks or relational databases available on the user’s network. QGIS supports raster, vector, and mesh layers. QGIS also allows using data from external sources with the help of web services such as Web Map Service (WMS) and Web Feature Service. QGIS is a constantly developing software as anyone can add new features or update existing tools. Newer versions of QGIS are frequently released on the official website. It is a cross-platform software that can be installed in Windows, Linux, and MacOS.

More information, more accurate and timely decision. In present high tech world, the more information you have it is easier to make an accurate decision. The information comes in many different ways, from reports to digital photos. A new way to analyze data is a geographic information system (GIS). GIS allows to bring all types of data together based on the geographic and locational component of the data. GIS is a useful tool for seeking innovative ways to solve the problems.

9.1 What is GIS?

A geographic information system (GIS) is a system designed to capture, store manipulate, analyze, manage and present all types of geographically referenced data. GIS can be defined as a computer-based system for digital entry, storage, transformation, analysis and display of spatial data. A geographic information system integrates hardware, software and geographically referenced data for further analysis. GIS allows users to interpret the georeferenced data in many ways that reveal relationships, patterns and trends.

1.1 INTRODUCTION

Geographic Information System (GIS) is the new emerging field and grows at very rapid pace. Now GIS is a billion dollar industry with applications in varied disciplines. At present, GIS is being used by professionals from various disciplines. In this decade, GIS is being used by experts who are good in GIS technology for various applications. The development trend indicates that GIS will be used by common man in near future and at the same time, advanced GIS analysis will be carried out by GIS experts.

Any technology is developed out of necessity and GIS is of no exception. When a large amount of data were available for water distribution systems, road network, sewer lines, telecom lines, electricity lines, gas pipe lines, state wise population, natural resources etc, it is important to store, maintain and retrieve the data for applications. It is not possible to manually browse through the large amount of paper records. Also even if the data is available in an unorganized way in the computerized environment, it is not useful. Hence if the data are referred to locations in earth surface and the data are stored in an organized way, it is possible to retrieve and analyse the data for applications. Hence the solution is GIS and developed today into reality. Developed countries are using GIS widely in many areas but developing countries are moving towards the development of GIS database for their resources.

Remote sensing, aerial photography, cartography, surveying and other field instruments for attribute data collection contributes to the data acquisition. Cartography, surveying, geography, geodesy contributes for mapping process. Disciplines like computer science and statistics, mathematics involved in processing and analysing data . Computer science and mathematics involved in storing the data structure.

GIS maps are intelligent. It has many advantages compared with paper map in this digital age.

Spatial data means data which are referenced to earth. Maps, satellite imageries, aerial photographs are example of spatial data. Attribute data which are attached to spatial data are called as aspatial data or non-spatial data.

If these data are brought into GIS then it is stored in a standard format, it is possible to update, share, retrieve, manipulate and analyse quickly. Much of the time and money is saved in case of reproduction and better decisions could be made

World Trade Organisation

The World Trade Organisation (WTO) was the result of years of painstaking efforts on the part of governments and other bodies to establish a globally acceptable basis for a new economic order. It was established to correct the imbalances and disparities in international trade and bring about an evenly balanced world trade order that equally benefits the developed, developing and least developed nations. While there are several agreements under the WTO, the Agreement on Trade Related Aspects of Intellectual Property Rights (TRIPS Agreement) specifically represents the resolve of all member countries to use intellectual property as one of the means for achieving economic balance and diminishing the trade barriers.

The term Geographical Indications (GIs) attained significant status in trade agreement negotiations after the establishment of World Trade Organization (WTO).Under WTO, Agreement on the Trade Related aspects of Intellectual Property Rights (TRIPs) sets forth standards to regulate international intellectual property protection and enforcement and establishes international minimum standards for GIs. Geographical Indications identify goods that have a specific geographical origin and possess a quality, reputation or other characteristics which are due to that place of origin. Geographical Indications are now widely accepted as valuable marketing tools in the global economy and are useful to protect rights of communities. Geographical Indications are not granted to individuals but are granted to the group/association of producers as the symbol of collective ownership.

In modem days, many informations receive through electronic media with instant connecting by satellite based information on social, economical, environmental etc. the informations are coded with feasible electronic encrypt and delivered to people. Similarly remote sensing, GIS (Geographical Information System) and GPS (Global Positioning System) also serve world for better understanding the ground reality along with reducing cost of operation, transforming data through electronic webs easily. In earlier phase, ground related information was not easily obtained because all kind of work had been done manually using analog maps of earth; even map draw was done by drafting from totposheet or hand maps, no interface of analog and digital world.

Introduction

A geographical information system (GIS) is a kind of database that has software tools for handling, analyzing, and presenting spatial data and descriptions of phenomena that have a location component. This system can also involve human users and support staff, procedures and workflows, a body of knowledge about relevant concepts and methods, and institutional organizations in a wider sense. GIS technology is a key part of spatial data infrastructure, which the White House describes as “the policies, technologies, standards, human resources, and related activities that are necessary to acquire, process, distribute, use, maintain, and preserve spatial data.”

Geography plays a vital role in understanding the complex dynamics of fisheries, encompassing both marine and inland ecosystems. The spatial distribution of fish populations, habitats, and environmental factors are all critical components that influence the productivity and sustainability of fisheries. By examining the geographical aspects of fisheries, researchers and managers can gain valuable insights into the interactions between fish populations, their environment, and human activities.
12.1 Importance of Geography in Fisheries
Geography is essential for understanding the spatial dynamics of fisheries, including:
• Habitat mapping: Identifying and mapping fish habitats, such as coral reefs, estuaries, and wetlands, is crucial for managing fisheries sustainably.
• Fish migration patterns: Understanding the migration patterns of fish populations helps researchers and managers develop effective conservation and management strategies.
• Environmental factors: Geography helps researchers understand the impact of environmental factors, such as climate change, ocean acidification, and water quality, on fish populations and ecosystems.
• Human activities: Geography also helps researchers understand the impact of human activities, such as fishing, coastal development, and pollution, on fisheries and ecosystems.

Abstract

Indian Peninsular shield has been thought as tectonically inert and aseismic for many years by the Geoscientists. But, subsequent to the disastrous earthquakes in Killari, Jabalpur and Kutch, studies have been initiated in multiple directions on various aspects of seismicities. The present study is aimed at bringing out a possible picture on the seismic vulnerability of parts of Westernghats of Tamil Nadu using various tectano geomorphic anomalies like unifrequency lineaments and different levels of dissection of plateaus, denudational geomorphic anomalies like anomalous talus materials and fluvial geomorphic anomalies like radial drainages, compressed meanders, eyed drainages and wider flood plains interpreted from the raw and digitally processed Landsat TM and IRS P6 LISS-III satellite datasets. The subsequent generation of individual GIS layers on these anomalies and their integration revealed that the N-S faults are tectonically active and the NE-SW and NNE-SSW faults are active faults. Many earthquake epicenters were also found to fall along these lineaments / faults.

Introduction

The Indian peninsular shield, exposing the Archaeozoie - Proterozoic piles of rocks, is known for its tectonic inertness and the related land stability. Owing to such shield area character, the geoscientists were also having strong convictions for a long time that seismically the area is safe.