eChapters

India is predominantly an agriculture based country and 65% of the Indians depend on agriculture. To meet the ever increasing nutritional demands of Indian population, production and productivity of vegetables have to be increased manifold within the limited available land and other resources. Seed is the basic and critical input in which the expected dividends from all other inputs depend and it plays a crucial role for enhancing the stability of productivity. With the ever increasing demands for a mechanized, energy efficient type of agriculture, each seed is expected to produce a vigorous plant, which would develop. uniformly under a wide range of environmental conditions.

Seed enhancement technologies have historical basis dating back hundreds to thousands of years. Seed coating was being practiced by ancient Chinese farmers who coated seeds of rice with mud balls to anchor the seeds in water saturated soil . The Greeks presoaked the cucumber seeds in milk or water to make them germinate quicker. Keeping the seeds in moist cloth or soaking in water prior to sowing was a common practice among the farmers of India from time immemorial.

Occasionally some diseases can be noticed in male animals, which are responsible for the reduced reproductive performance of the bucks. Sometimes these diseases can damage or obstruct the male reproductive passage and responsible for the infertility and sterility in the bucks. This type of infertility may be associated with pathology of testes, epididymis, vas deferens, accessory sex glands, and urethra or may be associated with abnormal semen production due to congenital or hereditary causes or due to acquired causes.

When a herbicide is applied to the soil, it is subjected to various interactions with soil and surrounding environment which ultimately determines its persistence. Dissipation of these compounds from soil system is by three main processes viz., physical (volatilization, leaching and runoff), chemical (photochemical decomposition, adsorption by organic and inorganic colloids and chemical decomposition) and biological (microbial decomposition and plant uptake) 

1. Physical Processes

a) Volatilisation

Introduction

Given the interdependence of all ecosystem units and humans, education for supportable sustainable development (ESD) is a crucial educational tool. The Brundtland Report of 1987 also highlights a crucial element when it states that “everyone must have access to the basic necessities of life and the opportunity to realize their dreams of a better life for sustainable development.” In order to alter the prevailing beliefs and attitudes which people have about themselves, society, and the environment, ESD — which is mapped out on the three pillars of the economy, society, and environment—plays a crucial role. The core tenets of ESD are those that support sustainability, including social tolerance, gender equity, intergenerational equity, poverty reduction, and environmental preservation and renovation.

The Rio Declaration, which outlines 27 sustainability principles, makes this claim. As they support the development which is related to education and reorient current education to promote sustainability, these principles can assist governments, society, and educational institutions in routinely classifying information, principles, skills, and values. Globally, education which is related to sustainable development, or ESD, is widely regarded for its substantial contribution to improving livelihoods and advancing society’s transition to sustainability. Although opinions on the viability of sustainable development vary, it is generally agreed that moving toward a sustainable future requires increasing public awareness, education, and training. Notwithstanding the difficulties in defining sustainability, it is evident that many social behaviours— such as those involving pollution, inefficient energy use, water conservation, and other issues—are not sustainable.

Pomegranate is emerging as one of the important fruit crops for semiarid and arid areas of India with the identification of superior varieties like Ganesh, Mrudila, Arka Ruby, and Bhagwa the area under pomegranate is increasing fast. Therefore the demand for elite planting material is also increasing fast. Pomegranate is propagated vegetatively either by cutting or air layering since ages. However now a day’s orchards raised from tissue culture are also very common. Nursery as a business preposition can also be as profitable as raising a crop. 

Types of Nurseries According to Marketing
    1.    Wholesale nurseries
    2.    Garden centers
    3.    Nurseries for large-scale gardening (municipals etc.)
    4.    Regular nurseries

Coastal areas are defined as the interface or transition areas between land and sea, including large inland lakes. Coastal areas are diverse in function and form, dynamic and do not lend themselves well to definition by strict spatial boundaries.

Economic importance of coastal areas

Many of the world’s major cities are located in coastal areas, and a large portion of economic activities are concentrated in these cities. The coastal zone is an area of convergence of activities in urban centres, such as shipping in major ports, and wastes generated from domestic sources and by major industrial facilities. Many of the world’s most productive agricultural areas are located in river deltas and coastal plains, which contribute for national economic growth.

A judicious use of cytology will be beneficial to the practicing veterinarians as diagnosis is available within a shortest period of time and can decide on proper treatment e.g. TVT can be successfully treated medically without surgical intervention.

Diagnostic Approach in Clinical Set Up

• Clinical investigation
• Clinical pathology
• Necropsy
• Biopsy
• Cytology
• Histopathology
• Electron microscopy
• Fluorescent antibody techniques
• Immunohistochemistry
• Genomic techniques
• Microarray
• Proteomics
• Metabolomics etc.

Calcification

Calcification is the deposition of calcium phosphates and calcium carbonates in soft tissues other than bones and teeth. It may be classified as dystrophic and metastatic calcification.

Dystrophic Calcification

Dystrophic calcification is characterized by the deposits of calcium salts in necrosed tissue of any organ (Fig 8.1).

Etiology /Occurrence

• Necrosis.

• Parasitic infections.

• Tuberculous lesions.

Introduction

A vision of the industrial landscape of the future that emphasises safeguarding society and the environment has lately surfaced as the “Industry 5.0” idea. People collaborating with robotics and intelligent machines are referred to as “Industry 5.0.” By utilising cutting-edge technologies like big data, Internet of Things (IoT) and robots can help people operate more efficiently and quickly. The Industry 4.0 pillars of efficiency and automation are given a more human touch through this. It aims to combine the inventiveness and problem solving abilities of human employees with the powers of mechanisation and artificial intelligence, ultimately producing a more productive and adaptable production environment. This paradigm shift emphasises the value of human decision-making and intervention in the industrial context while addressing the drawbacks of complete automation. By fusing the strengths of both robots and humans, Industry 5.0, which is still in its early stages, has the potential to revolutionise several industries. In 1987, the United Nations Commission defined sustainability as addressing the requirements of the present without compromising the capacity of people in the future to address their issues. Sustainability is essential in Industry 5.0, the next stage of industrial development characterised by growing digitization and automation. Within this paradigm, sustainable practices reduce resource consumption, trash, and emission levels, leading to more effective utilisation of resources like materials and energy. Industry 5.0’s commitment to sustainability reduces waste, carbon dioxide emissions, and environmental impacts. Utilising green technologies and eco-friendly practices helps reduce environmental impact

Check dams are small water control structures designed to slow down water flow and limit erosion, particularly in hilly or mountainous regions where other flow regulation methods may not be feasible. The suitability of a site for check dam construction depends on factors such as terrain gradient, soil characteristics, and the potential for enhancing groundwater recharge. Locations with flat or mildly sloped land and stable soil conditions for a solid foundation are generally ideal. These dams function as multi-purpose solutions, playing a vital role in water regulation and soil preservation. Their importance extends across hydrological, ecological, and social aspects, making them key components in sustainable infrastructure efforts.
WHAT ARE CHECK DAMS?
Check dams are small structures constructed across shallow rivers or streams to harvest water. These barriers help retain excess monsoon water in a small catchment behind them. The pressure buildup in this area pushes water into the ground, aiding groundwater recharge. This stored water, both on the surface and below, is primarily used for irrigation during and after the monsoon but can also serve domestic and livestock needs. They vary in size and are made from materials such as clay, stone, or cement. Earthen check dams can be easily built by farmers, whereas masonry and RCC (Reinforced Cement Concrete) dams require skilled labor and higher costs. Earthen structures typically do not allow overflow, unlike RCC and masonry dams which include spillways for excess water.
Construction of a Check Dam
Used as an engineering solution to prevent soil erosion in vulnerable areas, check dams reduce water speed, trap sediments, and sometimes only consist of an embankment. Initially, a water body forms behind the structure, which gradually fills with silt.

1. Introduction
Hydrogenation plays a vital role in the transformation of organic compounds, making it essential for synthesizing fine chemicals and pharmaceuticals. This process is widely utilized in both laboratories and for industrial applications (Andersson et al., 2008). Typically, two approaches are used for hydrogenation: traditional one involves direct hydrogenation using pressurized hydrogen gas, and the other relies on transfer hydrogenation (TH), which involves addition of hydrogen into a molecule from a non-H2 sources (Johnstone et al., 1985). The use of high-pressure hydrogen gas, however, demands significant investment in infrastructure, making it less economically feasible for developing a sustainable hydrogenation industry. In contrast, TH has gained increasing attention due to its sustainability, particularly when employing hydrogen donors derived from biomass, such as alcohols and organic acids, which are abundant, cost-effective, and easy to handle instead of using non-renewable H2 gas for reduction of CO2 (Becattini et al., 2021) (Figure 1).
2. Historical Background and Classification
The hydrogen transfer process has a rich history spanning over a century. In 1903, Knoevenagel first demonstrated that palladium black effectively promoted the disproportionation of dimethyl 1,4-dihydroterephthalate into dimethyl terephthalate and cis-hexahydroterephthalate, in which hydrogen transfer was occurred between identical molecules (identical donor and acceptor) (Knoevenagel et al., 1905). This pioneering work established the foundation for hydrogen transfer reactions. Braude and Linstead later categorized these reactions into three distinct types (Braude et al., 1954):

Introduction

Production system under arid and semi-arid region faces several biophysical constraints (high solar radiation, low and erratic rainfall, high wind velocity, poor soil conditions, etc.). Availability of irrigation water and irrigation potential in these regions are meager. Nutrition, food security and sufficient livelihood options based on agriculture are the major challenges of the people living in these regions. Sustainable productivity in these regions cannot be achieved by monoculture of either seasonal or forage crops, and thus hinges the need for diversifying the cropping pattern through fruit based cropping system which has good potential particularly in the arid and semi-arid regions. Because hunger and malnutrition are often linked to poverty, providing economic opportunities through horticultural production not only helps family incomes, but also addresses food security and nutrition. Thus, cropping system approach for agricultural production has greater significance in these regions.

It is agony of the situation that even after attaining food security after a wonderful revolution, we are at a verge of complex combination of several crisis. This notably includes lack of nutritional security, deteriorating genetic base, loss of biological-diversity etc. Therefore at the 66^th session of general assembly of the United Nation 2014 was formally declared to be the “International Year of Family Farming” to reposition family farming at the centre of discussion to address multiple problems existing in agriculture (www.fao.org/family-farming-214/home/what-is-famly-farming/en/).

Family is the basic unit of the society. A self reliant and prosperous society needs self sustaining families which in turn require equitable and creative participation by all members of the family. Family farming is the backbone of agriculture where a rural youth effuse and rejuvenate this backbone through effective participation and obeisance of the tradition through which indigenous technical knowledge is transferred.

Introduction

The branch of science that deals with resolving the evolutionary relationships among organisms is phylogenetics. Phylogeny is the description of biological relationships, usually expressed as a tree. A statement of phylogeny among objects assumes homology and depends on classification. Phylogeny states a topology of the relationships based on classification according to similarity of one or more sets of characters, or on a model of evolutionary processes. In many cases, phylogenetic relationships based on different characters are consistent, and support one another. If different characters induce inconsistent phylogenetic relationships, they all are dubious. Conversely, note that the same similarity data may be consistent with different possible topologies or trees.
 
Molecular approaches to phylogeny developed against a background of traditional taxonomy, based on a variety of morphological characters, embryology, and from fossils, information about the geological context (stratigraphy).

Fruits, vegetables, ornamentals, plantation crops and spices, medicinal and aromatic plants, tubers, are the major horticultural crops contributing to the economic growth in India. Even though the horticultural sector is growing fast, with India being the second largest producer of fruits and vegetables in the world, the productivity and quality have to be improved in order to meet the demand of increasing population. Under these circumstances, ecofriendly techniques needs to be adopted which could ensure food security and sustainable production. Indiscriminate application of agrochemicals and chemical fertilizers in horticultural crops and their residues could harm the human health, soil and environment. Horticultural crops need an ecofriendly technique, as most of the horticultural products are directly consumed. Hence, there should not be any residues of agrochemicals in food products. In the current context, use of ecofriendly, cost effective and organic-based inputs like biofertilizers can maintain health of the soil and good quality in horticultural crops. The application of biofertilizers offers an attractive and sustainable means of improving the quality of food products. Biofertilizers like Azotobacter, Azospirillum and AMF and PGPRs not only supplies the required nutrients to plants, but improves the fruit quality and quantity (Pathak et al., 2017).

5.1 Introduction

In many problems of economics, we may want to know how small or how large a certain quantity may become. In other words, we may want to know the minimum and maximum values of some functions of variables.

The term ‘optimisation’ may be used in general, both for maximisation and minimisation. The term ‘optimal position’ is often applied to the ‘equilibrium position’ resulting from the balancing of the forces.

Introduction
Escherichia coli (commonly abbreviated as E. coli) is a Gram-negative, facultative anaerobic, rod-shaped bacterium that is commonly found in the lower intestine of warm-blooded organisms (endotherms).
Escherichia coli are common inhabitants of the terminal small intestine and large intestine of mammals. They are often the most abundant facultative anaerobes in this environment. They can occasionally be isolated in association with the intestinal tract of non-mammalian animals and insects. The presence of E.coli in the environment is usually considered to reflect faecal contamination and not the ability to replicate freely outside the intestine.
Morphology
E.coli is Gram-negative, facultative anaerobic and non-sporulating. Cells are typically rod-shaped, and are about 2.0 micrometers (μm) long and 0.25- 1.0 μm in diameter, with a cell volume of 0.6–0.7 μm. It can live on a wide variety of substrates. Strains that possess flagella are motile. The flagella have a peritrichous arrangement. It is motile by peritrichous flagellae, though some strains are non-motile.Spores are not formed. Capsules and fimbriae are found in some strains.
Cultural Characteristics
Escherichia coli or E.coli cells may grow on a solid or in a liquid growth medium under a laboratory condition. Solid and liquid media may have exactly the same composition except that the solid medium contains an extra 1.5% agar. Different E.coli clones may have different properties. Colonies growing on solid media represent different clones. It is an aerobe and a facultative anaerobe. Optimal growth of E. coli occurs at 37°C (98.6°F) but some laboratory strains can multiply at temperatures of up to 49°C (120°F).

20.1 Introduction
The technique of reeling several cocoon baves together to create a single thread is known as silk reeling. This is accomplished by winding the resulting thread onto a rapidly spinning reel after collectively unwinding filaments from a collection of cooked cocoons at one end in a heated water bath. There are three different ways to reel in raw silk: (1) directly on a standard-sized reel, (2) indirectly on small reels, and (3) by using a re-reeling machine to transfer the reeled silk from small reels onto standard-sized reels. An efficient reeler willhold onto the predefined number of cocoons per end in order to produce silk with a consistent denier Some techniques are used in reeling. Different reeling mechanisms are used for different purposes.
20.2 Various Silk Reeling Devices
20.2.1 Hand Spinning Wheel
Using a simple spinning method, two hands run the apparatus to remove silk thread from cocoons: one hand turns the wheel while the other feeds the cocoons. In one of the devices, the cocoons are cooked, while in the other, reeling thread is wound onto each wheel. A more tactile and artisanal method of silk reeling is available with hand spinning wheel reeling. A great degree of expertise and experience are needed to provide consistent outcomes and the appropriate silk characteristics (Fig.20.1).

13.1. Introduction
Knowledge regarding various relationships existing between costs and output is necessary to comprehend the concepts of equilibrium conditions of different firms under different market conditions. Basically we require data on output, fixed costs, variable costs and the prices of inputs and outputs. From this data we finally derive all the seven cost concepts, viz.,TFC, TVC, TC, AFC, AVC, AC and MC. These cost concepts would have implications for output expansion of the firms and equilibrium position of the firms in different time periods. In the cost theory, economists use different names for cost concepts under different context. They are money costs or nominal costs, real costs, opportunity costs, economic costs, implicit costs, explicit costs, deflated costs, social costs, short run costs, long run costs, separable costs, etc.
Nominal Costs or Money Costs
These are usually expressed in money terms at current prices. Nominal costs of production refer to per unit cost of production of output at current market prices.
Real Costs
When the costs of inputs and input services are expressed at constant prices they become real costs.

Climate change impacts on agriculture are being witnessed all over the world, but countries like India are more vulnerable in view of the high population that depends on agriculture and excessive pressure on natural resources. The warming trend in India over the past 100 years (1901 to 2007) was observed to be 0.51°C with accelerated warming of 0.21oC per every 10 years since 1970 (Kumar, 2009). The projected impacts are likely to further aggravate the yield fluctuations of many crops with impact on food security and prices. Climate change impacts are likely to vary in different parts of the country. Parts of western Rajasthan, Southern Gujarat, Madhya Pradesh, Maharashtra, Northern Karnataka, Northern Andhra Pradesh and Southern Bihar are likely to be more vulnerable in terms of extreme events (Mall et al., 2006).