eChapters

Introduction 
Nanotechnology has become a highly influential field in science, showcasing diverse applications and promising trends over the past few years. Nanoscience has been a source of inspiration for material science researchers, encouraging the exploration of innovative methods to synthesise novel structures with significant properties and applications(Kolahalam et al. 2019). Nanoparticles are the core of nanotechnology, with “nano” denoting sizes smaller than a billionth of a hair, specifically below 100 nm (Volath et al. 2008).The focus on small-sized nanoparticles (1–100 nm) has become a global research priority attributable to their remarkable applications in physical, chemical, and biological sciences (Jeevanandam et al., 2018). The term “nanotechnology” was coined by Nobel Prize-winning physicist Richard Feynman in his renowned 1959 lecture titled “There’s Plenty of Room at the Bottom.”(Boverhof et al., 2015).Feynman proposed the advanceof smaller devices down to the molecular scale, asserting that it was not the laws of nature but rather the lack of appropriate equipment and approaches that limited progress in working at atomic and molecular scales(Clunan et al., 2014). In recent times, nanotechnology has transitioned into a mainstream and crucial innovation. When materials are manipulated at the nanoscale, their properties undergo significant transformations, leading to remarkable applications in physics, space science, chemistry, medicine, energy renewal, healthcare, environmental science, mechanics, electronics, civil engineering, optics, and more [Figure. 1](Mourdikoudis et al., 2018; Joshi et al., 2008; Suresh Kumar et al., 2019); AarthyePandian et al., 2019).

Biological synthesis of Zinc Oxide (ZnO) nanoparticles

Aim

To synthesize nano ZnO particles using fungal isolates.

Introduction

The ZnO nanoparticle are effective anti-bacterial and antiodur agent. Biological synthesis of ZnO nanoparticle is a new approach for environmentally benign protocol in context to green nanotechnology, (Raliya and Tarafdar, 2013).

Aim

To synthesize Zero valent (Fe) (nZVIs) iron using tea leaf extract.

Introduction

In this approach extracts of natural products (in most cases green tea leaves) with high antioxidant capacities are used. The compounds present in these extracts react with Fe (III) in solution to form nZVIs (Nadagouda et al., 2010).

Introduction

Soil is a non-renewable resource that sustains life, providing ecosystem services such as biomass production, contaminants filtration, raw material supply, nutrient, and hydrological cycle (Panagos et al., 2020). It contributes about 95% to global food production (Borrelli et al., 2020). Soil is a major global biodiversity pool and a large carbon pool on Earth. Therefore, it plays a crucial role in regulating energy and mass flow and their transfer between the biosphere, lithosphere, hydrosphere, and atmosphere (Ferreira et al., 2021). Climate change and unsustainable management practices are threatening the soil’s natural capital resulting in soil degradation occurring simply from erosion to contamination and leading the soil to completely unproductiveness under severe conditions, leading to food insecurity (Ashoka et al., 2017; Syed et al., 2022)

Introduction

Western world started paying attention to climate change after the Industrial Revolution when collateral environmental problems began appearing with the development. But in India, many shastras gave philosophy of sustainable development before the evolution of many civilizations.

It means that “All this is for habitation by the Lord, whatsoever is individual universe of movement in the universal motion. Man should use all resources by renunciation, he should not see them with feeling of lust”. Here, renunciation means controlled use of resources. It is known as Green Application of the resources nowadays.

Whenever the term ‘green’ is used as an adjective with certain phrases, the said phrase is considered to depict a friendly character with the environment. In this sense, the Cambridge Dictionary defines the word ‘green’ as “relating to or believing in the protection of the natural environment.” For instance, Green Technology, one of those concepts towards which this paper is concerned, will refer to those technologies which are environment friendly. But this won’t help us understand what green technology actually means.

ABSTRACT

The global market for baked products has reached up to $495 billion in the year 2019. It is estimated that its value will reach up to $580 billion by the end of 2025 with a growth rate of 2.7 % between 2020 to 2025. Ovens are operated with the help of LPG/diesel/electricity. The hybrid ovens can give higher energy efficiency along with targeted quality parameters. The previous data such as oven temperature, heat supplied per unit time, the moisture content and variety of the raw material used can be provided to a specific computer programme. The heat recovering unit is a unit which captures the escaping hot air and the same may be reused by pumping the hot air to the front of the oven to preheat the incoming cold air. The biogas can be generated from the bakery waste. There will be 45 % or more methane production from bread and biscuit waste in the retention time of about 12 to 55 days in a biogas plant. To make the bakery fully operated on green technology, solar renewable energy can also be utilized.

Tourism is a phenomenon, which has taken off immensely in the past three decades. It concerns us all, be it by allowing us to travel long distances as tourists, or by forcing upon us a mass of visitors to our part of the world. In the past, people did not travel half as much. Financial obstacles and responsibilities to land and animals stopped them from doing so. Only in 1845 did Thomas Cook of Leicester, England, organize the first package tour, making this experience available to people outside of the privileged classes by cutting down on expenses. By 1939, an estimated one million people were traveling abroad each year. Nowadays, the population of the Mediterranean swells to double over the summer, from 130 million resident inhabitants during the winter to 260 million in high season. There were about 698 million international tourist arrivals worldwide in 2000. All regions in the world grew, and the fastest developing region continued to be East Asia and the Pacific. Tourism has become the largest industry in the world. And just like all thriving industries, though it has a lot to give, it also takes a lot in turn. Unfortunately, the toll that we pay for it has been rising steadily. While the prospect of people traveling less in the future seems improbable, to say the least, a new idea has already sprung up: If we cannot stop tourism, let us at least travel sensibly.

I. FILL UPS

1. The isolation distance for seed crop of greengram must be _____.
2. Spacing adopted for greengram seed production is _____.
3. Seed rate of greengram is_____.

Mungbean is one of the most important pulse crops. It is grown in almost all parts of the country. Mungbean is primarily a crop of rainy season; however, with the development of early maturing varieties, it has proved to be an ideal crop for spring and summer seasons. Middle of March to last week of June is the most suitable growing period where there is a plenty of life-giving sunshine. During this period high temperature and low humidity keep insects and disease infestations at their lowest. Summer season offers an excellent opportunity for raising short duration pulses.

8.1 Introduction

The management of greenhouse environments has become crucial in modern agriculture due to increasing concerns about climate change and the urgent need for sustainable farming practices. Greenhouses, also known as “controlled environment agriculture” facilities, have revolutionized the way we grow food by extending the growing season and allowing us to cultivate a wide range of plants in various climates. They achieve this by precisely regulating environmental elements such as temperature, humidity, light, and carbon dioxide concentration, which are all crucial for optimizing plant growth and yield.

About 80% of the world population live in developing countries and are dependent on agriculture. Agricultural products, just after harvesting, are dried to the safe moisture level. Open solar drying for drying agricultural products is being practiced since ages throughout the world. Due to its several drawbacks as danger of (dust, rain, ultra-violet rays, birds, animals etc.), advance technique, i.e. greenhouse drying, is being adopted for drying crops to reduce the drying time and increase the quality of the food products.

Drying involves a heat and mass transfer phenomenon in which heat energy supplied to the product surface is utilized in two ways: (i) to increase the product surface temperature in the form of sensible heat and (ii) to vaporize the moisture present in product through the provision of the latent heat of vaporization. The removal of moisture from the interior of the product takes place due to induced vapour pressure difference between the product and surrounding medium. The moisture from the interior diffuses to the product surface to replenish the evaporated surrounding moisture.

The working principle of greenhouse drying is in which the product is placed in trays receiving the solar radiations through the plastic cover and moisture is removed by natural convection or forced convection.

Greenhouse drying are being adopted to reduce the losses and to increase the quality of the dried products. Solar energy is the most promising power source of energy for drying of agricultural products. Most of the farmers adopt open sun drying because it is abundant and inexpensive. But the open sun dried products are also subjected to remarkable losses due to environment. Losses of fruits and vegetables are estimated to be 30%-40% during drying under open sunlight. The post-harvest losses can be reduced by adopting advanced means of drying, i.e. greenhouse drying. The greenhouse dryer can be operated in natural and forced mode as required. Studies reveal that the greenhouse dried products are of superior quality and better colour retention as compared to open sun drying.

1.1 Introduction

Greenhouse effect, regulated by the presence of greenhouse gases in the earth’s atmosphere, is a natural process that plays a major part in shaping the earth’s climate. A continued rise in concentration of the greenhouse gases has led to enhanced greenhouse effect resulting in global warming and global climate change. The impact of human activities on greenhouse gases (GHGs) emission through fossil fuel burning, agriculture and industrial processes is important and familiar to people. This chapter addresses basic principles and physics of greenhouse effect and the role of Indian agriculture in GHG emissions. Agriculture is a potential source and sink to GHGs in atmosphere. It is a source for three primary GHGs: CO₂, N₂O and CH4 and sink for atmospheric CO₂ . Management of agricultural land, land use change and forestry has a profound influence on atmospheric GHGs concentration. The two broad anthropogenic sources of GHGs emission from agriculture are the energy use in agriculture (manufacture and use of agricultural inputs and farm machinery) and the management of agricultural land. Large sections of the India’s population depend on biomass resources like wood, crop residues and cattle dung for energy. In the agriculture sector, besides the CO₂ emissions due to burning of crop and animal waste, India’s large ruminant population and rice fields are significant contributors to CH₄ emissions. An understanding of GHG emissions by sources and removal by sinks in agriculture is important to take appropriate mitigation and adaptation strategies and to estimate and create inventory of GHGs.

The variety of greenhouses and greenhouse material, equipment and accessories are so many. However, there are certain basic materials that essential in almost all types of green houses. These are

Structural framing materials

Such materialsinclude low maintenance non-heat conducting timber; strong and durable galvanized steel; or light, low-maintenance and sturdy aluminium alloys. Though plastic pipe frames are usable, they are not very strong to withstand snow load or strong wind sheering forces. What one should choose as the framing material would be determined by the material one wishes to use as glazing, his budget and the permanence of the structure one desires. Aluminium is a popular material for greenhouse framework because it is relatively lightweight, rustproof, affordable and easy to assemble. The downside is that it is not a good insulating material and in very cold weather, heat loss from the metal frame could inflate your heating bill. Also, you would need to look for sturdy frames if your greenhouse is located in an area that experiences high winds. Condensation could also occur on an aluminium frame. Wooden structural frameworks for garden greenhouses are also a popular choice for its aesthetic value, natural feel and the ’warmth’ it exudes. It is an easy material to work with especially if you are not using a greenhouse kit for building. Some greenhouse owners would settle for nothing else as they believe it is the only material that complements the natural beauty of plants inside the greenhouse! Wood is a good insulating material so it will not allow heat loss in cold weather. Reinforced wood has superior strength and has an excellent load bearing capacity. Being a natural material, it has the potential to develop mildew or disease and offer a haven to tiny pests. So, when you choose wood to build the framework of your greenhouse, be sure that you pick a high quality hardy wood such as redwood, cypress or cedar. Also, treat wood with non-hazardous chemicals so that your plants are not adversely affected. The preservatives used for wooden greenhouse frames should be pressure treated, salt type or copper naphthenate. Copper naphthenate is a general use preservative used for pressure treating utility poles and timber. It is known to be very effective in preventing mould, mildew and dry rot. It works very well against wood-damaging fungi and insect pests. Pentachlorophenol is a restricted use wood preservative and is toxic to plants and humans. It is not available to the general public and poles or timber treated with it are not suitable for use in a greenhouse. PVC pipe can also be used as support for small greenhouses that are to be covered with polyethylene, but PVC requires additional support to withstand strong winds. Being flexible, PVC can be used particularly well in hoop houses. Though it has the advantage of offering insulation and, if UV treated, are long-lasting, they are not good at bearing the load of hanging baskets and shelving to any appreciable degree. PVC that is treated to be resistant to ultraviolet radiation is also known as UPVC.

Introduction

Precise and continuous measurement the greenhouse gases (GHGs) fluxes/ emissions in agricultural systems are required for accounting and budgeting of carbon. Further, the long-term measurements of GHGs fluxes are equally important as precise measurement. Therefore, high frequency and long-term measurement of GHGs across the cropping systems are essential for chalking out the GHGs emissions mitigation strategies. Various technologies with definite working principles are used for estimation of GHGs emissions in agriculture.

Greenhouse Gases Estimation Techniques

Two basic principles are followed to estimate greenhouse gases in agriculture. One is the collection of GHGs from the field and subsequent analysis of the concentration of gases through gas chromatography (GC). Another principle is based on sensors measurement with the help of infrared gas analyze (IRGA). The two techniques used for the measurement are (i) ‘closed chamber method’ (manual/automatic), and (ii) ‘sensor-based method’. Generally, the GHGs fluxes in agricultural crop field are estimated by ‘closed chamber method’ for methane (CH₄) and nitrous oxide (N₂O). And for carbon dioxide (CO₂) measurement either soil respiratory chamber or canopy chamber is used that measures CO₂ with the help of infrared gas analyzer (IRGA).

1.1 Introduction

Increased emission of greenhouse gases results in climate change which becomes one of the most prominent environmental issues to the world today. Carbon dioxide (CO2) is the major greenhouse gas whereas nitrous oxide (N2O) and methane (CH4) are other substantial contributors to climate change (IPCC, 2014, Tongwane et al., 2016). However, these gases are emitted in minimal quantities in comparison to carbon dioxide but impart more global warming effect by absorbing more infrared radiations (Oertel et al., 2016). The warming potential of one kg of CH4 is 23 times more than one kg of CO2 while  in the case of N2O, it was nearly 300 times more than CO2 (Ramaswamy et al., 2001, Bharti et al., 2019; Biswas et al., 2010). Around one-third of methane and two –thirds of nitrous oxide come from soil (Prather et al., 1995, Tubiello et al., 2015, Smith, 2016).

3.1 Chemistry of greenhouse gases (ghgs)

Greenhouse gases (GHGs) are atmospheric-gases that have capabilities to absorb and radiate-back the infrared (IR) radiation in the earth-atmosphere system (Figure 3.1). In this process the atmospheric-gases absorb and radiate- back IR radiation in lower atmosphere effectively emitting and absorbing heat energy heat energy. They maintain the heat budget of earth-atmosphere and keep our plant warm. If we typically see the chemistry of those gases, the key point is that they should have dipole moments. This is the property which makes them capable to absorb and radiate-back the range of IR radiation. In a molecule when valence-electrons are not equally shared in a bond between the two atoms, a slight positive charge is developed above one atom and a negative charge on the other atom. That charge difference of the different atoms in a molecule generates the dipole moment. For instance, in water vapour (H₂O- vapour), an unequal sharing of electrons and or separation of charge causes dipole moment. In H₂O, the centre has a positive charge at the hydrogen atoms and negative charges are located on the oxygen atom. The magnitude of dipole- charges, vibration and stretching of O-H bond generates certain frequency of the oscillating dipole moment that actually regulates the absorption capacity of IR radiation by H₂O vapour.

Naturally Greenhouse gases are cover as blanket on the Earth and kept it about 33⁰C warmer than it would be without these gases in the atmosphere. This is called as the “Greenhouse Effect”.

Over the past century, the Earth has increased in temperature by about 0.5⁰C and many scientists believe that this is because of an increase in concentration of the main greenhouse gases viz., carbon dioxide, methane, nitrous oxide and fluorocarbons. People are now calling this climate change over the past century the beginning of “Global Warming”.

There are several systems for greenhouse heating based on heat source and purpose or crops to be produced in greenhouse.

Electric heaters

Unit space heaters, either floor mounted or supported, are normally dependent on electricity supply supported by stand-by generators. Abroad they are fuelled with natural or bottled gas or fuel oil and use fans for heat distribution. This system requires a relatively moderate capital investment, is easy to install, and provides for easy expansion of facilities. If unit air heaters are used, they should be spaced and directed to blanket the entire area with heated air.

Hot Water Systems

Hot water systems utilize metal pipes that can be perimeter, under benches, or overhead fan forced unit heaters can be used. This system requires a boiler, valves, and other necessary controls. Hot water system is simpler to install and normally requires less maintenance than a steam system. Hot water systems are mainly used in smaller greenhouse.

Fast increasing population, changing climate, shrinking land and water resources are the major challenges before us to meet the food and nutritional security of the population at global level. Improvement in the production and productivity of crops are the immediate need to boost the availability of food and improvement economic conditions of the farmers. Greenhouse technology has shown tremendous potential in improvement in production and productivity of crops even under uncongenial soil and climatic conditions. The farmers having very small farm holdings in countries like Japan, Holland and South Korea have improved their income and living standards by adopting protected cultivation technologies. However, India is yet to trap the potentials of the technology. Modern green houses require uninterrupted huge electric power for control of environment (heating/cooling/air circulation etc), which is considered one of the major cause for global warming. High installation and running (energy) cost, high cost of production; poor government support and lack of farmers’ friendly/cost effective greenhouse technology are some other challenges. Low cost zero energy based solar greenhouse technology popularizes the green houses in small and marginal farmers of remote areas. Such greenhouses are specifically design using local resources and also to trap the natural solar radiation/ heat and maintain it for longer period. The designs do not require electric power which ultimately reduces the installation/running cost and also does not have the adverse effects on the environment. This will not only improve the economic status of the farmers but also provide nutritive food to their families and also enhance production and productivity of various crops in the country without deteriorating the environment.

In India, risk-prone, high altitude area constitutes the easternmost trans-Himalayan part of Ladakh and Zanskar range (Jammu and Kashmir) and some parts of Lahoul Spiti (Himachal Pradesh). Truly described as cold desert with low population density, Ladakh constitutes the easternmost trans-Himalayan part of Jammu and Kashmir in India, comprising two districts, Leh and Kargil, bordering Pakistan and China (Fig. 1).