eChapters

1.1 Weather

Firstly, what is weather? Simply, the conditions in the atmosphere above the earth is called weather. It refers to the conditions such as wind, rain and temperature, prevailing at a particular location during periods of hours or days. We often ask “what’s the weather like today”? Any individual can answer to this question as it requires only a short term experience or say exposure to the atmosphere. The TV news forecasters predict weather each day and inform about the temperature, cloudiness, humidity, or possibility of storm in the next few days. Weather is localised, say, it’s a hot and cloudy weather in one part of the country and dry and windy on the other part.

1.1.1 What are the factors that influence weather?

Before we try to understand the factors that influence weather, we must understand what the components that describe a weather conditions are? Is it the rains, or the air temperature or both? The answer to this question is not so easy, and it’s a bit complicated. There are many components that constitute weather. Weather components include rain, cloud cover, sunshine, winds, hail, snow, sleet, storms, thunderstorms, heat waves and many more. These components are sometimes referred as weather parameters or climate elements. Each of these components define weather patterns of a particular area. These components determine the status of local atmospheric conditions. Again, as a basic definition, weather is the state of the atmosphere and majority of weather phenomena occur in the lowest layer of the atmosphere, called as the troposphere. Does it mean that ground conditions such as the topography, water bodies and vegetation of a particular area has nothing to do with it? No, it is not so. The state of the atmosphere is subjected to various processes taking place not only in the atmosphere but also in the ocean, the sea-ice, the vegetation, etc. Weather parameters or the components of weather form a sequence of events, and the influences are far reaching and they do not remain solely in the atmosphere. For example, terrestrial radiation impacts the air temperature, air pressure and humidity. The terrestrial location also influences the cloud formation. The clouds may or may not turn into precipitation depending on the outcome (cloud or rain), which is by and large governed by troposphere. Likewise, a lack of precipitation affects not only weather conditions, but also soil moisture conditions that may result in lowering of water levels (ground water table) in soil. Wind speed and direction are governed by the atmospheric pressure and air temperature. So, all these parameters or components are interrelated and the weather conditions are the outcome of their interactions. Therefore, we can say that, the three main components of weather are temperature, precipitation and solar radiation. These components are influenced by different factors.

Climate change is caused by both natural as well as anthropogenic causes and it has been changing since the inception of earth-atmosphere (Figure 2.1). In a broader sense, anthropogenic activities (human activities) also must be considered as natural one in longer time scale as human and their activities are also a part of natural-ecosystem-functions. Among the natural phenomena, volcanic eruptions and continental drifts significantly affect the earth’s precipitation and temperature. A huge volume of CO₂ is released due to volcanic eruption at a little span of time-period which heated up the earth-atmosphere. Climate variability is primarily governed by rise in sea temperature, movement of warm water from the Western Pacific towards Peru, and El Nino which occurs at an intervals of 3-7 years. Climate variability also influenced the alteration in temperature and precipitation world wide. And persistent climate variability cause long term climate change. Therefore, basically three drivers that causes climate change are, the alteration in the energy of sun received by earth-atmosphere (natural causes), variations of ref lectivity of earth-surface- atmosphere system (natural as well as anthropogenic causes) and fluctuations in the greenhouse effect (natural as well as anthropogenic causes).

The environmental needs for rearing fish and shellfish seed center on ensuring ideal conditions that support their growth and survival. Key elements include maintaining proper water quality, temperature, oxygen levels, and feeding routines, all of which differ based on the species and their developmental stage. Rearing systems may vary from controlled indoor tanks to open outdoor ponds, each offering unique benefits and challenges.
ROLE OF TEMPERATURE, LIGHT, DISSOLVED OXYGEN, PH, SALINITY
The development, growth, and survival of fish and shellfish are strongly influenced by environmental factors. In aquaculture and hatchery practices, careful control of parameters such as temperature, light, dissolved oxygen, pH, and salinity is essential to ensure the healthy rearing of aquatic species. These factors directly affect metabolism, reproduction, molting, immunity, osmoregulation, and larval development. Water Temperature Water temperature plays an important role on the life history of shellfish in determining their biological reaction. Shellfish have a range of water temperature in which they function best. Outside this range, they do not function as well.

1. Introduction

India has diverse agro-climatic conditions which, widely promote the cultivation of different types of fruit crop. A wide variety of fruit crops are grown across the country such as banana, mango, citrus, papaya, guava, grapes, pomegranate, apple etc. Globally, we rank second in fruit production after China. The total area under fruit crops is 66.64 lakh ha with a production of 99.06 million Mt (Anon., 2018). However, the average productivity (13.03 t/ha) in fruit crops is quite low than other countries. Further, the per capita fruits availability in our country is 207.9 g/ day which is below than the recommended quantity of 230 g/capita/day (Anon., 2018). 

42.1 Introduction

Several fish species including their seeds, eggs and spores have been imported either occasionally or artificially and introduced into the water of our nation. These fishes are not native to our country and are called exotic fishes. Based on utility, these fishes include food fishes, game fishes and larvicidal fishes. In other words, the fish species that are not of Indian origin but transplanted into Indian water for cultural purposes are called exotic fishes. Exotic fish are an alien species that are non-indigenous having their origin in another country

Game: A species of wildlife hunted or trapped by humans, including upland birds, waterfowl, small game, forbearing, and larger mammals that are within the purview of management.

Gamete: i) A mature sex cell, such as sperm/egg used in fertilization. A reproductive cell whose nucleus and often cytoplasm fuses with that of another gamete during fertilization resulting in the formation of a zygote. Gametes are usually differentiated into male and female gametes. ii)  A male or female reproductive cell, typically the product of meiosis, capable of uniting in the process of fertilization with one of the opposite sex.

Training: The Concept

For any kind ofdevelopment, resource is the basic condition and necessity. Every resource should undergo a process of refinement, up gradation, and integration for being able to contribute to a proper functioning and accomplishment. No exception to human resources, the most splendid and creative resource of the earth. While human resources are unique? The following are the reason:

(a) It can think and create

(b) It can integrate and coordinate

(c) It can ideate and communication

(d) It can support and sustain

1. Introduction

A lawn is an indispensable feature of a landscape with a sizeable proportion of space relative to other garden features. It is regarded as the heart of a garden that enhances the beauty of a landscape providing both functional and aesthetic utility. A well maintained lawn at a residential, public or institutional places can be used both for active and passive recreation. It enhance the beauty of surroundings and contribute to real estate value. The turf industry is being viewed as an integrated sector of ornamental horticulture in the developed countries like USA, Australia, China, Netherland, UK, Japan and Denmark. Globally, the turf grass industry has employed skilled workforce for maintaining more than 700,000 athletic fields and over 17,000 golf courses, with an annual worth of $ 20 million each year (Aldous and Chivers, 2002).

Iron (Fe), zinc (Zn), copper (Cu), manganese (Mn), nickel (Ni), boron (B), molybdenum (Mo) and chloride (Cl) elements are known as micronutrients. The micronutrients are also called as trace elements or minor elements as they are required very small quantities by plants. The elements Fe, Zn, Cu, Mn and Ni are known as micronutrient cations and B, Mo and Cl are known as micronutrient anions and they behave accordingly in soils. Among these elements, Fe content in soil as well as plant is the highest and sometimes higher than phosphorus (P) and sulphur (S). In plant, the concentration of micronutrients often found up to 100 mg kg^-1, except that of Fe and Mn which may go up to 500 mg kg^-1 (dry weight basis). Another element, cobalt (Co) is also regarded to be essential for the growth of certain higher plants and animals, and likely to be included in the list of micronutrients. The importance of micronutrients has been realized during the past four decades when micronutrient deficiencies were observed in most of the soils in our country, where intensive agriculture is practiced.

1. Introduction

India is known as seed spices hub because as far as International level of concern, our country is the largest producer, consumer and exporter of seed spices. Seed spices contribute about 51.79 % of total area and 19.06 % of production of total spices in the country. The area under seed spices is about 1.74 million hectare and production is about 1.45 million tons (Lal, 2018). In our national economy, seed spices are play an important role, the demand is increasing not only due to its large domestic consumption, but also for export. Since long, huge demand of seed spices and importing countries in global market look at India for quality produce of seed spices. The ISO has been listed a total of 109 spices, out of which 63 spices are being grown in India and 20 spices are being classified as seed spices. 

Macroclimate: The climate of a region. See also Microclimate, topoclimate.
Macronutrient: A chemical element necessary in large amounts (usually > 50 ppm in the plant) for the growth of plants. Includes c, h, o, n, p, k, ca, mg, s. ‘Macro’ refers to quantity and not to essentiality of the element. See also Micronutrient.
Maggot: Legless larva, especially of a fly.
Main effect: The response to different levels of a treatment factor, measured independently of other factors. In a balanced design such as a randomized complete block, the main effects of levels of a treatment factor are estimated by averaging the corresponding responses over all levels of every other factor.

1. Introduction

Agriculture in India is livelihood for a majority of the population and can never be underestimated. Increasing population, increasing average income and globalisation effects in India will increase demand for quantity, quality and nutritious food, and variety of food. Therefore, pressure on decreasing available cultivable land to produce more quantity, variety and quality of food will keep on increasing. India’s food security depends on producing cereal crops, as well as increasing its production of fruits, vegetables and milk to meet the demands of a growing population with rising incomes. To reach world-wide food security, improved food production and food productivity, we need to approve innovative and futuristic advances and technologies to improve crop cultivation, yield and productivity.

Formulation Technology

An essential first step in any pesticide-based pest management procedure is choosing the right formulation. It’s a crucial managerial choice that affects the bottom line, client happiness, worker safety, and environmental quality. Knowing the characteristics of different formulations is important for both the supervisor and the applicator. The applicator is responsible for both application and mixing. Applicators come into direct touch with the substance, both diluted and concentrated. A basic, personal concern for one’s health and the health of others necessitates understanding the formulation’s safety features.

Introduction

The compassionate treatment of animals and consideration for their well-being is an important aspect of livestock farming. Compassions needs to be an integral part of livestock farming as livestock are sentient being. Positive human experiences during handling are essential for ensuring the welfare of animals. Humans play a significant role in the environment of production animals, particularly in commercial cattle production where daily interaction occurs. Intensively farmed animals endure negative emotions that diminish their welfare. For instance, they experience fear from unfamiliar stimuli or from being separated from their social group (Jones, 2011), as well as stress, pain and frustration due to the obstruction of naturally driven behaviors (Dawkins 1998) or the absence of predictability and control over their surroundings (Bassett et al, 2007), along with boredom stemming from insufficient environmental stimulation (Wemelsfelder, 1993). Compassion is a fundamental virtue in veterinary practice, and female-owned businesses in this sector often exhibit this attitude. Compassion, the highest quality of women, is highly valued in veterinary practice, and women-owned enterprises are perfect example of this. They place a high value on compassionate care, acknowledging the close bond between people and animals and making sure each animal gets the attention and assistance they require by focusing on improving the quality of life for all animals and their loving owners.

The modern improved crop varieties are responsive to fertilizers and demand higher fertilizer application rates to sustain high grain yields. With higher fertilizer inputs, the pest problems have become prominent and endangered the yields necessitating the large scale use of agrochemicals. Some of these chemicals are purposefully released or they may be accidentally released into the environment as waste water or residues from industrial manufacturing and processing of fields.

Soil is one of the most dynamic sites of biological interactions in nature, serving as a growth medium for vegetation and as a habitat for microorganisms and thus has a major role in determining the overall quality of our environment. The physicochemical properties of soil strongly influence the growth, activities and population dynamics of microorganisms in soil and also modify the effects of chemicals on the microbial community. Microorganisms are scavengers in soil. Due to physiological variability, they degrade a variety of chemical substances including insecticides, fungicides and herbicides in soil to derive energy and other nutrients for their growth and metabolism (El- Shahaat et al., 1987; Bhuyan et al., 1993). As a result, the population density of the active microorganisms increases which favorably influences the biological transformation of nutrient elements in the soil (Rangaswamy and Venkateswarlu, 1993; Jana et al., 1998). On the other hand, there are many pesticides which exert adverse effect on growth of soil microorganisms (Martinez-Toledo et al., 1992). However, no definite conclusions can be made on the effects of different pesticides on the growth and activities of microorganisms in soil since different groups of insecticides exhibit manifold variations in toxicity. The degree to which a pesticide affects microbial population and their activities is largely dependent upon the chemical, its dosage and the particular physicochemical parameters of the environment such as soil type, temperature, water content, pH, method of application and other factors. Soil physicochemical factors are particularly important and probably account for the variations in toxic effects often seen with the same compound. Some of the soil microorganisms and soil microbial processes appear to be more sensitive to pesticides than the others. For example nitrification appears to be highly sensitive whereas N-mineralization is relatively resistant. These results reflect the diversity of microorganisms mediating these processes. The present effort has been made to review briefly the effects of pesticides on microorganisms and their activities.

The design and structure of a warehouse should facilitate proper ventilation, temperature control, and protection from pests. This includes features like smooth floors, durable walls, and proper drainage systems to prevent water accumulation. The warehouse should also be insulated to protect stored goods from extreme temperatures and humidity fluctuations.
Regular maintenance is essential to keep the warehouse in good condition. This involves routine checks for structural integrity, such as inspecting for cracks, leaks, or signs of pest infestation. Equipment like ventilation fans, conveyors, and lighting should be regularly serviced to ensure optimal functioning.
Sanitation and hygiene are equally important in preventing contamination and pest issues. The warehouse should be thoroughly cleaned to remove any dust, dirt, or residues that could harbor pests or mold. All surfaces, including walls, floors, and storage bins, should be disinfected regularly. Proper waste disposal systems should be in place, and areas where food products are stored should be kept free from garbage or organic waste that could attract pests. Ensuring a clean and well-maintained warehouse helps preserve the quality and safety of stored goods.
SELECTION OF STORAGE TYPE
Some basic Guildelins or Principles are Given as Follows:
ROUND OR RECTANGULAR STORAGE
In terms of structural cost per tonne of storage, round storage buildings are generally more cost-effective than rectangular ones. The reasons for this are straightforward:

1. Introduction

Spices play an important role in human life since time immemorial. Mainly in India, it is not only important as dietary or health product but few spices also have its religious significance. India is being not only largest producer and consumer but exporter of spices also and hence having potential to enhance the economic value of spices. According to Union Minister for Agriculture and Farmer’s Welfare, Spices production in the country grew from 67.64 lakh tonnes in 2014-15 to 106.79 lakh tonnes around 2020-21 having annual increase of 7.90%, along with increase in area from 32.24 lakh hectares to 45.28 lakh hectares. With this increase in production and increasing demand of spices because of their health benefits, spices do have economic benefits and farmers can earn better through it.

1. INTRODUCTION

Chemical pesticides are designed to control or eliminate pests such as insects, rodents, weeds, bacteria, and fungus. Although pesticides have played a significant role in increasing food production and controlling various diseases in the agriculture system but indiscriminate use of pesticides has resulted in contamination of soil, water bodies’ etc. raising deep concern about food safety and human health. Excessive use of these harmful chemicals affects kidneys, developing fetus, and liver immuno-suppression and increased incidence of breast cancer. Some of these pesticides are also reported as mutagenic. Other health related problems such as impaired memory and concentration, severe depression, headache, etc have also been reported.

Through field survey (Kadian et al., 2010) it has been found that chlorpyrifos is a widely used pesticide in household application as well as in horticulture crop in National capital region Delhi. This tempted us to understand the nature of chlorpyrifos (CPF) and its metabolites and assess the suitability of available techniques for detoxification of contaminated soil.

Graphene and related carbon nanomaterials have attracted considerable attention as reinforcements for high-performance green composites. This chapter examines graphene, graphene oxide, reduced graphene oxide, carbon nanotubes, and graphene nanoplatelets and their integration with bio-based polymers and natural fibres. It discusses synthesis and fabrication methods, characterization techniques, mechanical properties, electrical and thermal performance, barrier properties, and applications. The chapter also considers dispersion and compatibility challenges associated with incorporating nanomaterials into green matrices. Graphene-based composites are explored for energy storage, environmental treatment, biomedical applications, sensors, packaging, automotive, and aerospace uses. Emerging trends focus on multifunctionality, scalable production, cost reduction, and sustainable processing.

1. Introduction

Plants offer a rich source of active compounds that have been exploited as scents, flavourings, pigments, pesticides, and medicinal compounds for thousands of years. Plants are thought to utilise these metabolites as a primary strategy for adapting to and surviving in a variety of ecological niches and environmental conditions, as well as to combat biotic intrusions in their environment (Weng, 2014). The increased interest in phytomedicine and medicinal supplements, as well as the increased regulatory obligations for their safety and reputable contents of active compounds, has prompted the development of methodologies for the quality control of multi - component concretes found in plant-derived nutraceuticals. Metabolite diversity in plants is thought to have evolved over time to help plants survive in harsh environments, and it is continually changing.