eChapters

Plants are exposed to various stresses such as temperature, water, oxygen, salts, nutrition etc, during its growth under dry land condition. Various simple tests have been developed by plant scientist for evaluation of different cultivars against these stresses. These tests are simple to perform in the laboratory with fewer instruments that are commonly available in most of the laboratories in developing countries. These tests have significance in plant water relations and cultivars reliably screened for various stresses. The crops upon which these tests have been performed here are used by the proponents of the tests. These tests are not advised to be performed on crops other than those used by the authors. It probably needs standardization for other crops. The following test has been explained for the benefit of the readers.

Split-plot Design

In field experiments, sometimes a factor has to be applied to a large experimental unit. This is true when the different methods of ploughing or irrigation are to be compared. And in such cases it is possible to introduce a second factor, which does not require large plots, with a small number of levels into the same experiment, at a little extra cost. This is done by splitting the plots (called whole plots of the first factor into as many sub-plots as there are levels of the second factor.)

A split-plot design with an RBD for the first set of treatments (called “the whole-plot treatments”) is obtained by allotting the whole-plot treatments at random to the whole plots of a block and then randomizing the second set of treatments (called “the sub-plot treatments”) to the sub-plots within each whole plot.

This enables us to test for the main effects of the sub-plot treatments and the interaction of the whole-plot treatments and the sub-plot treatments more efficiently than the main effects of the whole-plot treatments in a split-plot design.

Aim

To design shallow and deep bins

Theory

The structure behaves as a deep or shallow bin depending upon its relative dimensions such as depth and diameter or width. It is decided from the concept of the plane of rupture.

Plane of rupture: The plane of rupture is that surface down which a wedge of material bounded by one wall face, the free surface, and the plane of rupture would start sliding if bounding wall were to move.

Q.1 Fill in the blanks

1. _______and_______are pulse crops.
2. Rice is a_______pollinated crop.
3. Different breeds of cattle are_______and_______
4. _______and_______are sugar crops.
5. _______Important cereals are_______and_______
6. _______and_______are examples of fibre crops.
7. _______Dapog method is originated from_______
8. The origin of rice is_______region.
9. Best temperature range for germination of wheat is_______oC.
10. Adsali sugarcane is of_______months duration.
11. _______portion is taken in cane for propagation

Introduction

Plum is an important temperate fruit, which is used as a fresh fruit as well as in preserved form. It is next to the peaches in economic importance amongst the stone fruits. It requires a certain period of chilling during winters to break dormancy, so it is cultivated in areas where winters are cool. Fruits are a rich source of minerals, vitamins, sugars and organic acids, in addition to protein, fat and carbohydrates. The types of plums with high sugar content above 18% are known as prunes which can be dried with pit. In India, plum was introduced by Alexander Coutts in 1870 in Himachal Pradesh. After evaluation, only Japanese plum has been recommended for commercial cultivation in the mid hills of the temperate region of the north-western Himalayas. Some low-chilling varieties of plum were also introduced at Punjab Agriculture University, Ludhiana.

Secondary nutrients

Secondary nutrients includes Calcium, magnesium, and sulfur. Crop plants requires secondary nutrients in moderate quantity for crop growth and yield. Their requirement by plant is less than the macro nutrients. Sulphur and Magnesium requirement of crops are very similar to the Phosphorus needs. Calcium is required in higher amount than Phosphorus. Calcium and magnesium are mostly deficient in acid and alkali soils. In India S deficiencies are found in almost 40 per cent of the cultivated soil. Under intensive cropping system, the use of higher amount of nitrogenous fertilizer without secondary and micro nutrients and lesser use of organic manures are the major reason for the secondary and micro nutrient deficiency in soil.

Madhya Pradesh has the highest population of Schedule tribes in India. With a population of 15,316,784, they occupy 21.1% of the state’s total population and 14.7% of the total tribal population of India. About 61% of the rural tribal population in Madhya Pradesh is living below the poverty line and is primarily relying on agriculture and allied industries for their livelihood (Planning Commission Report, 2010). But since the majority of them rely on unscientific subsistence farming, the income earned from such practices is very low. Apart from the higher poverty level, the nutrition levels in Madhya Pradesh also signify a grave situation. The state has one of the highest levels of anaemic children and women in India, and this incidence is highest in tribal regions of the state. The tribal regions of Madhya Pradesh have one of the highest percentages of malnourished children in India (UNICEF, 2019). The undernutrition and anaemia in tribes are primarily due to the lack of access to quality food. 

This chapter introduces the concepts of internal and external egg quality and explains the methods used to measure important quality attributes. It covers shell quality, shell strength, cleanliness, shape, albumen quality, yolk quality, air-cell characteristics and freshness. Classical indices such as Haugh unit, yolk index and specific gravity are discussed alongside candling and modern non-destructive instrumental techniques. The chapter also explains how egg quality changes during storage through moisture and carbon-dioxide loss and provides a scientific basis for interpreting quality measurements and applying them in commercial grading.

Introduction

In-spite of environmental, bio-physical and resource constraints in most parts of Rajasthan, the state can be classified into three distinct agro-climatic zones namely hot arid, semi-arid and sub-humid  from horticultural perspective. These diverse zones have excellent vegetable production potential with wide range of crops, varied opportunities and resource utilization. The extremes of high (March–October) and low (December–January) temperature conditions together with associated abiotic stresses in the hot arid and semi-arid regions limit the choice of crops and their genotypes, quality of produce and productivity. Vegetable exploitation with adaptive and native crop-plant species is generally found to be potential and stable under arid to semi-arid agro-climatic conditions of the state that receive 150–650 mm of rainfall and having abiotic stresses due to climatic variations, drought, frost, hot and cold winds, soil and water quality.

BGA belong to a class of prokaryotic photosynthetic microorganisms also known, as cyanobacteria are capable of fixing atmospheric nitrogen aerobically. Most abundantly found in tropical zone, never form fibrous growth and are enveloped by a sheath. The trophic independence of algae for C and N makes them responsible for a natural fertility buildup of rice field soils. The nitrogen fixing ability of BGA was first recognized by Frank and Prantil in 1889. The occurrence of the BGA in the rice field was reported by FE Fritsch in 1907.

Indian Aloe (Aloe barbadensis Mill.)  is commonly known as Ghritkumari in Sanskrit and Bangla, Ghikwar or Ghikanwar in Hindi, Aloe in English, Ghiquara in Urdu, Darkhtesibra in Persian, Sabbarat in Arbi, Guarpatha in Rajasthani, Koryed, Korkanta and Elwa in Marathi, Kunwargandal in Punjabi, Lolesara and Katthaligida in Kannada, Kattavala in Malyalam, Sirukanthli, Sirukattashai, Kattazhai, Sorttukathali and Chirukattali in Tamil, Kalawand, Manjikattali, Pinngorisht Kalvand and Chinnakalabanda in Telgu, Kumari and Mushaboro in Oriya and  Musabbar in Kashmiri. Because of its nutritional qualities, anti-oxidant and medicinal values, it is often called as ‘The Miracle Plant’, ‘The Natural Healer’, ‘The Health Plant’ and by many other names.

India’s agricultural accomplishment is a global success story

Post Green revolution; Some of the most pertinent questions that humanity faces

Can we sustain our food production ecosystem, while feeding 9 billon people?

Can we improve farm economics without reversal of soil biodiversity loss and carbon content?

Can agriculture play an important role in reducing carbon footprints and mitigating the current climate crisis?

Answers to abovementioned questions do not lie in the currently dominating chemical intensive farming practices, which rely too heavily on

This chapter introduces grading and standardization as mechanisms for converting biological variation in eggs into defined commercial specifications. It examines grade factors, quality classes, egg sizing and weight classification, and Indian standards including AGMARK and BIS. International approaches such as Codex, USDA and EU frameworks are compared. The chapter also describes automated grading equipment, candling, packing systems and packaging requirements. Particular attention is given to Indian egg-marketing channels, price behaviour, cold-chain requirements and consumer perception.

Continuous vegetable cultivation year round in the limited available land, without adopting crop rotation practices induces stress, which leads to low vegetable crop productivity. These conditions apart from building up soil-borne pathogens will also lead to other deleterious factors such as temperature extremes, flooding, drought, salinity, heavy metal contamination, insufficient nutrient uptake, soil pH stress, etc. causing severe crop loss. To overcome these abiotic stress conditions, grafting is an environmentally friendly technique for reducing losses in production in solanaceous and cucurbitaceous vegetable crops. The cultivated area of grafted Solanaceae and Cucurbitaceae has increased tremendously in recent years because the objective of grafting has been greatly expanded (Lee et al., 2010) to reduce infections by soil-borne pathogens and to enhance the tolerance against abiotic stresses.

Weather and climate have great influence on farm animal production. The environment in which an animal lives is referred to as its habitat. A habitat includes both biotic (living) and abiotic (nonliving) components of the animals’ environment. Abiotic components of an animal’s environment include temperature, humidity, oxygen, wind, soil composition, day length and elevation. Knowledge of how potential environmental stressors (ambient temperature, humidity, thermal radiation, air speed, etc.) can directly and adversely affect animal performance, health and wellbeing is also required for a successful animal farming. The indirect consequences of weather include their impact on feed quality and availability.

Birds and mammals are warmblooded (endotherms or homeotherms), possessing a thermoregulatory system that maintains a stable body temperature and uniform internal environment (homeostasis) by converting food energy into heat. All metabolic processes generate substantial heat and much of this is retained within the body of homeotherms by insulating layers of fat, feathers or fur. Dairy cattle, like other warmblooded animals, function most efficiently in environments where they can maintain their body temperature at around 38° C. Tissue and cellular metabolism and the underlying biochemical reactions that sustain life and productive functions need body temperature to be maintained within very narrow limits. Relatively small increases in body temperature result in the breakdown of body protein and a significant depression in production.

Climate change, particularly global warming has complex impacts on domestic animal production system affecting feed supply, challenging thermoregulatory mechanism resulting thermal stress, emerging new diseases due to change in epidemiology of diseases and causing many other indirect impacts. So, climate change will have farreaching consequences for dairy and meat production, especially in vulnerable parts of the world where it is vital for nutrition and livelihoods. Due to poor availability of good quality feed and fodders in India, animals are generally maintained on poor quality grasses available in the pastures or are stallfed, mainly on crop residues. India is already deficit in feed and fodder. These shortages would be further aggravated by the adverse effects of global warming on fodder crop production.

Introduction

Global fisheries produced roughly 171 million tons of fish, with an estimated sale value of US$ 362 billion, generating over US$143 billion in exports in 2016. Around 60 million people across the world are employed in fisheries and aquaculture, with the majority in the small scale capture fisheries sector of developing countries (FAO, 2018). India has an annual harvestable potential of 4.414 mt. and with 9.9 lakh active fishers, the sector provides livelihood to nearly 4.0 million people including the post-harvest sector (Sathiananthan, 2017). The estimated value of marine fish at landing centre level was Rs. 48,381 crores and at retail level was Rs. 73,289 crores during 2016 (CMFRI, 2017). Seafood exports from the country reached 1.38 million tons valued at $7.1 billion in 2017-18 (MPEDA, 2018). The fishing fleet of the country includes 1, 94,190 fishing units consisting of 72,559 (37.31%) mechanized, 71,313 (36.67%) motorized and 50,618 (26.03%) artisanal craft (CMFRI, 2010). The mechanised sector contributed 82% of catch followed by motorised (17%) and non-mechanised (1%) sectors in 2016 (CMFRI, 2017).

The development of marine fisheries sector in India occurred in three phases. In the first phase (up to 1965-66) fishing was mainly done by using non-mechanized indigenous craft and gear. The second phase (up to 1985-86) witnessed increased mechanization, improved gear materials and introduction of motorized country craft. In the last phase (after 1986) there was intensification of mechanization, motorization of the country craft and multi-day voyage fishing (Sathianandan, 2013).

The craft and gear technologies in marine fisheries sector vary based on the types of fish caught and nature of fishing ground. The economics of different production technologies in the mechanised, motorised and non-mechanised categories were analysed based on the size of boats and capacities of engines and gear. The economic indicators developed in different coastal states helps for micro level investment decisions as well as for developing macroeconomic policies for the fisheries sector.

The poultry industry in India is experiencing rapid growth, with meat production and egg production increasing by 5.13% and 6.77%, respectively, in 2022-2023 compared to the previous year (BAHS, 2023). Numerous factors and challenges impact poultry production on a global scale, such as intense international competition, evolving consumer attitudes toward food safety, animal welfare, and environmental conservation. Poultry commonly harbor infectious diseases that can also affect humans, with many of these zoonotic diseases having reservoirs in mammalian species other than humans, adding complexity to their management.

This chapter introduces the major biological, nutritional, environmental and management factors that determine egg quality. It examines genetic and breed influences, hen age and stage of lay, nutrition and feed composition, housing systems, environmental conditions and heat stress. The effects of disease, medication, handling, on-farm management and storage are also discussed. The chapter emphasizes that egg quality results from interactions among multiple factors rather than from a single intervention. Induced moulting and nutritional management are considered as practical approaches to maintaining quality during the laying cycle.

Introduction

The hot arid zones of the country are spread over 32 million ha in the state of Rajasthan (61%), Gujarat (20%), Andhra Pradesh (7%), Punjab (5%), Haryana (4%), Karnataka (3%) and Maharashtra (0.4%), in addition to the cold deserts in the states of Jammu and Kashmir and Himachal Pradesh which are characterized by hostile agro-climate and fragile eco-system. In Rajasthan, the hot arid zone covers 12 district of whole western Rajasthan. It covers the 61 % area of the Rajasthan State and characterized by an annual rainfall between 100 – 500 mm with a coefficient of variation (CV) varying from 40 – 70 per cent; low and erratic rainfall combined with extremes of temperature (450-500 cal/cm2/day); low relative humidity; high potential evapo-transpiration value ranging from 1600 mm in eastern part and 1800 mm in western part of the region.

4.1 DNA: The word means
    
4.2 Double Helical Structure: The Watson and Crick Model
    
4.3 Family of DNA 
    
4.4 The Chromosomes