eChapters

Crop husbandry includes various cultural practices aimed at enhancing yields from a given unit of land. To achieve this aim, practices such as growing high yielding cultivars which are fertilizer responsive, high density planting and application of large quantities of different nutrients and frequent application of pesticides have been followed. Consequently these practices have been found to be responsible for some problems which were not associated with crops raised by adopting traditional agricultural practices. Thus the benefits of modern methods appeared to be lost, because of the unforeseen problems for which the effective solution have to be found out. Various methods that could be dovetailed with regular cultural practices have been shown to be useful in either reducing the existing pathogen inoculum or avoiding build up of inoculum in the field.

Physical and chemical techniques have been applied either alone or in combination with certain cultural practices to enhance the effectiveness of reducing pathogen inoculums and consequent reduction in disease incidence. Seeds and asexually propagated planting materials have been treated with physical and / or chemical methods in order to eliminate the pathogens from them and to build up disease-free stocks. Physical and chemical methods may be applied to reduce the inoculum present in plant debris as well as in the soil and water. Enough attention has not been bestowed to tackle the pathogens that may exist on fallen leaves or shoots from which infectible spores may be produced later.

Management of crop diseases by various methods of exclusion in order to reduce the pathogen population in a geographical location / country may be achieved by either preventing introduction of pathogens or by growing disease-free seeds and planting materials. In addition, the inoculum of a pathogen reaching newly planted crops may be significantly reduced by adopting appropriate cultural practices also. The contributions of these factors for successful cultivation of crops are discussed hereunder.

8.1 Prevention of Introduction of Microbial Pathogens

Prevention of pathogen introduction is the primary responsibility of plant quarantines. Quarantines have been established by several countries by enacting appropriate laws that regulate the importation of plants, seeds and asexually propagated plant materials. These materials are placed in post-entry quarantines (PEQs) and examined by technical personnel for the presence of pathogens and pests. It is obligatory for the exporting countries to comply with the regulations of the importing countries. As the movement of plant products has increased enormously, following the adoption of the General Agreement on Tariffs and Trade (GATT), vigilant enforcement of sanitary and phytosanitary measures has become essential. The Food and Agriculture Organization (FAO) appointed an Expert Consultation on the Harmonization of Plant Quarantine Principles to formulate basic principles to determine standards for plant quarantine principles in relation to international trade (FAO 1991). According to the recommendations of the Expert Consultation, the sovereignty of the importing country is recognized and it has the right to implement the phytosanitary regulations deemed fit by that country. However, cooperation among countries was emphasized for the successful implementation of the recommendations by the member countries belonging to one of the eight regional plant protection organization set up after the International Plant Protection Convention (IPPC) held in 1951. A plant pathogen is recognized as of quarantine significance (QS), if its exclusion is considered to be essential to protect agriculture and natural vegetation of the importing country which has to be provide necessary infrastructure and trained personnel to prevent or delay its entry along possible routes. Lists of quarantine pathogens and the regulations to be followed are prepared by the importing country and made available to the exporting countries.

Various aspects of micorbial plant pathogens have been studied with the ultimate aim of gathering information that may be useful for development of effective disease management systems. Principles of management of crop diseases caused by microbial pathogens fall into three categories : exclusion, eradication and immunization.

7.1 Exclusion of Microbial Plant Pathogens

Exclusion of microbial pathogens may be expected to reduce the amount or efficacy of the initial population of pathogens that may be introduced into a geographical location / field. Exclusion is an important component of management of diseases, if the initial population of pathogen is large. This approach is particularly effective in the case of monocyclic pathogens that complete their life cycle only once during one cropping season. The methods with the aim of excluding the introduction of pathogens or to prevent the build up of inoculum required for disease spread are generally applied elsewhere. Hence, they have lower level of visibility compared to other approaches. Introduction of new pathogens present in plant and plant materials into another country or locations within a country may be effectively prevented by establishing plant quarantines. Build up of inoculum of microbial pathogens can be reduced considerably by the use of disease-free plants or planting materials supplied through certification agencies. These regulatory programmes have to be manned by trained technical personnel and supported by adequate infrastructure in terms of equipments and mobility (Chapter 8).

Crops are grown with the primary aim of maximizing the profit for the cultivators. To achieve this goal, high yielding cultivars and suitable agricultural practices are selected. But due consideration is not given for the levels of susceptibility of the cultivars and some of the agricultural practices may enhance the chances of disease incidence and consequent losses. Hence, it becomes obligatory to determine the effects of crop cultivar and agricultural practices on the extent of disease incidence and to assess losses caused by microbial pathogens in different crops in an agroecosystem. Crop losses reflect the effects of various factors such as use of disease resistant cultivars, application of chemicals, biocontrol agents and preventive measures to reduce inoculum levels, introduction of new diseases and restriction of disease spread. Assessment of crop losses is essential to choose the most effective short- and long-term strategies of disease management. Disease assessment enables the plant pathologists is to gather quantitative information for evaluating disease management strategies, for undertaking surveys of losses and breeding for disease-resistant cultivars.

Although thousands of plant species exist on the earth, only those that were found to be useful for humans as food, feed, fiber, timber and other utility materials have been selected for domestication. When these plant species were affected by various biotic and abiotic causes, the necessity arose to determine the ways and means of protecting the valuable plants species and to understand the host plant defense mechanisms and pathogenic potential of the microbial pathogens causing enormous losses to the cultivators. All plant species have built-in resistance to most microbial plant pathogens existing in the environment. Susceptibility of plants to some of them is an exception, since they are endowed with genes which effectively nullify the possible adverse conditions created by the microorganism. Likewise, microbial pathogens possess genes for survival and pathogenicity to survive in the absence of susceptible plant species and to successfully establish infection in suitable plant species. The microbial pathogens have evolved highly specialized tactics to overcome the defense responses and to rapidly multiply in plants for their survival and perpetuation in a geographic location / ecosystem

Plants are exposed to microbial pathogens at all growth stages from seeds to harvested produce. But they are resistant to numerous pathogens that are present in the environment and susceptible only to some of them. In other words, a plant species has built-in resistance mechanism to avoid or resist the invasion by many microbial pathogens. A pathogen may reach several plant species, but it can infect only a few plant species in the particular location or region. The process of pathogenesis or disease development is initiated when the pathogen reaches the plant surface that allows the initiation of infection. An organism is able to derive its nutrition from the susceptible host plant and becomes pathogenic. The physiological functions of such infected plants deviate from those of the healthy (normal) plants and suffer irreversibly to different magnitudes. The organism adversely affecting the plant growth and other functions to obtain nutrition is the pathogen. It develops rapidly or slowly in proportion to the levels of susceptibility / resistance of the host plant to the pathogen species concerned. Thus a plant species may be susceptible to some pathogens, while remains resistant / immune to other organisms that may be pathogenic to some other plant species. Depletion of compounds from the plants to meet the nutritional requirement of the pathogen leads to different kinds of external symptoms and internal changes due to derangement of normal metabolic functions of the host plant. The process of disease development in a susceptible host plant species is known as pathogenesis.

Detection and identification of the causes and diagnosis of the diseases rapidly and precisely are the basic requirements for developing effective crop disease management systems suitable for different ecosystems. Incorrect diagnosis leads to failure to contain the disease spread and consequent additional expenditure to the growers. Hence, it is essential that proper diagnostic procedures are followed to achieve the goal of reducing both quantitative and qualitative losses of agricultural and horticultural produce. Morphological, biological, biochemical, physiological, immunological and genomic characteristics of microbial plant pathogens have been carefully considered to develop rapid, sensitive and reliable methods of detection and identification of cause(s) of newly observed disease (s) in the locations concerned. Various methods of establishing the nature of microbial plant pathogens are discussed in detail in earlier publications

Occurrence of various diseases affecting agricultural and horticultural crop is known for several centuries. However, critical examination of crop diseases to understand the nature of the causative agents and extent of losses induced by diseases and development of effective disease management systems were possible much later. Any deviation from normal form and function of plants is considered as ‘disease’. Both pathogenic (biotic) and physiogenic (abiotic) causes are involved in diseases of plants. Adverse environmental conditions such as extremes of temperature, light and oxygen, soil moisture, pH and polluted air may alter the physiological conditions of the plants. Nutritional deficiencies also affect various crops leading to considerable losses. Microbial plant pathogens–fungus-like oomycetes, fungi, bacteria, phytoplasmas, viruses and viroids–form the major group of biotic agents that induce different diseases of crop plants in the field as well as during transport and storage (Narayanasamy 2002,2006). Presentation of information in this book is confined to various aspects of the microbial plant pathogens and the diseases caused by them.

Microbial pathogens may induce symptoms that may be visible externally and also in the deep-seated internal tissues which have to be examined using light or electron microscope. In the case of some diseases, the symptoms may be localized in different plant parts such as roots, leaves, stems, floral parts or seeds / fruits / vegetables. Such infections are known as local infection. On the other hand, the pathogen may spread from the point of entry into the host to other plant parts which exhibit characteristic symptoms. These diseases are termed as systemic diseases. In some cases, no recognizable visible symptom is produced although the pathogen is able to develop without inconveniencing the host plant species which are called as carriers and the infection is designated latent infection. Plant viruses are carried symptomlessly by many weed plant species which may serve as sources of infection for crop plants.

Human beings, considered to be the highly evolved living organisms, have been making consistent and constant efforts to lead comfortable life without much concern for the conservation of nature and adversities to other living and nonliving entities existing in the universe. To meet the requirements of food, feed, fibre, timber and other needs, the plants that could supply the above were selected and domesticated. When the useful plant species were cultivated over large areas repeatedly year after year, the problems afflicting plants that were not recognized earlier as constraints for crop cultivation, assumed monstrous proportions wiping out entire crops and ruining the livelihood of the people of that geographical location/country. World history is replete with numerous instances of huge crop losses caused by microbial plant pathogens resulting in malnutrition, hunger and death. Migration of millions of people to other countries for their survival, became unavoidable. Such historical evidences threatening the existence of humans necessitated to investigate the causes of destructive diseases like late blight and heliminthosporiose diseases affecting respectively potato and rice, the staple food of the largest populations of the world. In order to take appropriate measures for minimizing losses due to crop diseases and to mitigate the sufferings of man and the animals, application of various short- and long-term disease management strategies has become indispensable for the profitable cultivation of crops

Marketing is one of the most important factors in determining the success of any vegetable farming enterprise. Marketing includes all the operations and decisions taken by the producers. These decisions range from determining the most marketable crops for production to deciding how to best deliver quality produce to the consumers at a profit. However, contrary to popular belief, marketing does not begin after a crop is produced. Instead, marketing alternatives need to be considered even before the start of production.

However, vegetable marketing in India has not yet been organised so far. The long route from the grower to the retailer and ultimately to the consumer involves a chain of middlemen, transport contractors and wholesale merchants. Very often, there arises stagnation of the produce in the peak season or in the year of good production. The large number of intermediaries in the vegetable marketing channel grab maximum share of the consumer’s price and as a result, the producers’ profit becomes marginal. Vegetable cultivation is a capital intensive venture, and huge production alone cannot fetch profit for the growers. Organised marketing, storage and transport facilities are the key factors for making vegetable farming profitable which ultimatily boost vegetable cultivation.

Quality Components of the Produce

Various components of quality are used to evaluate the products in relation to specific grades and standards and responses to various environmental factors and post-harvest treatments. The relative importance of each factor depends upon the commodity and its intended use, fresh or processed. The main quality components of vegetables are mentioned below

Cropping system is defined as the cropping pattern followed on a farm and its interactions with farm resources, other farm enterprises and production technology. The yearly sequence and spatial arrangement of crops and fallow on a given area is termed as cropping pattern.

India has over 17% of world’s population living on 2.4% of the world’s geographical area. Per capita agricultural land has reduced by 67% from 0.48 ha in 1951 to 0.16 ha in 2008 due to explosive increase in population. In this situation, it is very difficult to get horizontal expansion in vegetable cultivation. Hence, total production per unit area can be increased by increasing the productivity per unit area through (a) growing improved high yielding varieties and hybrids, (b) adequate and scientific crop management practices and (c) increasing cropping intensities following different cropping patterns.

Potato

Potato, Solanum tuberosum L. under the family Solanaceae (Chromosome No. 2n = 4x = 48) is the most important non-grain food crop in the world, ranking 3rd in terms of total production with over 381 million tonnes per year in (FAOSTAT, 2017), after rice and wheat. It is grown in 150 countries spread across both temperate and tropical regions and at elevations from sea level to 4,000 m. It is extensively cultivated in China, Russian Federation, Ukarine, Poland, Ireland, Great Britain, Germany, Netherlands, France, Spain, South America, India and USA. Potato was brought from Peru to Spain by the Spaniards in 1565 when it was widely grown in Spain and Italy. They were probably brought to England in 1586 by Sir Francis Drake. Potato was introduced in India in early 17^th century probably by the Portuguese. Now it is one of the principal cash crops of India.

The crop

The subsection Potato is distinguished from all other subsections within the genus Solanum by “true potatoes whose tubers are borne on underground stolons, which are true stems, not roots”. The series tuberosa is characterised by “imparipinnate or simple leaves, forked peduncle, rotate to pentagonal corolla and round berries”.

The species S.tuberosum is characterised by “pedicel articulation placed in the middle third, short calyx lobes arranged regularly, leaves often slightly arched, leaflets always ovate to lanceolate, about twice as long as broad, tubers with well marked dormancy period”

Potato is an annual herbaceous plant and growth habit varies between and within species. The plant has a rosette or semi-rosette habit. The stem is erect in the early stage but becomes spreading and prostrate later on. The leaves are compound and alternate, irregularly odd pinnate. The tuber is an enlarged portion of an underground stem or stolon. Tuber eyes are the buds from which next season’s growth will emerge. Eyes are concentrated near the apical end of the tuber, with fewer near the stolon or basal end. Eye number and distribution are characteristic of the variety.

Potato is mainly propagated vegetatively by means of tubers and sometimes by botanical seeds, i.e., true potato seeds. Potato has a terminal inflorescence consisting of 1-30 (but usually 7-15) flowers, depending on the cultivar. The five petals give the open flower a star shape. A flower also has a pistil that generally protrudes above a cluster of five large, bright yellow anthers. The corolla colour varies from white to complex range of blue, red and purple. Flowers are self-pollinated but also cross pollination take place by insect. Seeds are produced in the fruit which is botanically called berry. Potato fruits, stems and leaves contain glycoalkaloids, the toxic compounds, of which the most prevalent are solanine and chaconine.

Protected cultivation can be defined as a cropping technique wherein the micro-climate surrounding the plant is controlled partially or fully as per the requirement of the plant species during their growth period. This cropping technique is the most modern approach to grow different horticultural crops mainly, vegetable crops and flowers for enhancement of both productivity and product quality. This technology has spread extensively the world over in the last few decades. This technology involves the cultivation of different crops particularly, horticultural crops in a controlled environment wherein the environmental parameters like the temperature, humidity, light, soil, water, plant nutrition, etc. are manipulated for enhancement of production as well as product quality even during off-season which ensures additional return to the growers.

Green revolution technologies such as greater use of synthetic agrochemicals like fertilizers and pesticides, adoption of nutrient-responsive, high-yielding varieties of crops, greater exploitation of irrigation potentials etc. has boosted the production output in most cases. However, continuous use of these high energy inputs indiscriminately now leads to decline in production and productivity of various crops as well as deterioration of soil health and environments.

Weeds are unwanted and undesirable plants which interfere with the utilization of land and water resources and thus adversely affect crop production.

Classification of Weeds

Weeds can be classified in three different manner based on morphology, life cycle, habitat and origin.

Most of the insect pest and disease (insects, mites, diseases, nematodes, etc.) management problems arise from relying entirely on pesticides for control. Integrated pest management (IPM) is a strategy that draws on a range of management tools with the goal of using the least ecologically disruptive techniques to manage pests within economically acceptable levels. IPM considers the production system in a holistic manner and looks at all aspects of the farming enterprise as potentially increasing or decreasing pest numbers and, where possible, enhancing the activities that reduce these pest populations.

Strategy for Integrated Pest and Disease Management

The basic IPM strategy involves routine crop monitoring to ensure that pesticides are only applied when needed, as well as to ensure appropriate timing of pesticide applications. The most developed bio-intensive IPM relies primarily on beneficial organisms to manage insect pests. When greater pest control is needed, interventions chosen are complementary to the survival of these beneficial organisms. As other pests are incorporated more and more prevention strategies are adopted which reduces the need for direct control practices.

Relationship Between Plant and Water

Water is the most vital component of the living cells and the basis of plant feeding. Water is also characterized with extraordinary physical properties: it has high specific heat, biggest latent heat of vaporization, very high thermal conductivity and greatest surface tension. Large amounts of heat are tied up with water because of very high specific heat, which contribute to both climatic stability and to heat budgets of the plants and other organisms. Water molecules are integral part of living systems being the solvent for metabolites and structural component of proteins and nucleic acids. In fact, biological macro-molecules cannot exist in their complicated secondary folding or spiralled helixes without the support of hydrogen bonding within their water matrix. The water matrix is also critical for metabolic activity because its properties of hydration permit ready reactivity between molecules in solution as well as between enzymes and their substrates, and the biochemical processes are sensitive to tissue hydration. A reduction of only 20-25 per cent below maximum hydration is sufficient to cause metabolic malfunctioning of many enzymes. It is the substrate for photosynthesis and a product of respiration. Water also helps to buffer plant tissue against fluctuations in the external environment. Plant growth including leaf expansion, organ enlargement, reproductive development and stomata function are all clearly associated with moisture status. Hormonal changes (abscisic acid and cytokinins) in plant body occur with brief reduction in water potential. Water is the also major force in shaping the climatic patterns.

Plant nutrition is the study of the chemical elements and compounds necessary for plant growth, plant metabolism and their external supply. In 1972, Emanuel Epstein defined two criteria for an element to be essential for plant growth:

In its absence the plant is unable to complete a normal life cycle.

The element is part of some essential plant constituent or metabolite.

This is in accordance with Justus von Liebig’s law of the minimum. The essential plant nutrients include carbon, oxygen and hydrogen which are absorbed from the air, whereas other nutrients including nitrogen are typically obtained from the soil.